C++ GnbLibGetHeader函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GnbLibGetHeader函数的典型用法代码示例。如果您正苦于以下问题：C++ GnbLibGetHeader函数的具体用法？C++ GnbLibGetHeader怎么用？C++ GnbLibGetHeader使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GnbLibGetHeader函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DdiEarlyPortInitCallbackTN

VOID
STATIC
DdiEarlyPortInitCallbackTN (
  IN       PCIe_ENGINE_CONFIG    *Engine,
  IN OUT   VOID                  *Buffer,
  IN       PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  GMMx6464_STRUCT         GMMx6464;
  IDS_HDT_CONSOLE (GNB_TRACE, "DdiEarlyPortInitCallbackTN Enter\n");
  if ((Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDP) ||
      (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDpToLvds) ||
      (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvds) ||
      (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvdsSwInit)) {

    IDS_HDT_CONSOLE (GNB_TRACE, "Found eDP/LVDS Connector\n");

    GnbRegisterReadTN (GMMx6464_TYPE, GMMx6464_ADDRESS, &GMMx6464.Value, 0, GnbLibGetHeader (Pcie));
    GMMx6464.Field.LVTMA_PWRSEQ_EN = 1;
    GMMx6464.Field.LVTMA_PWRSEQ_TARGET_STATE = 1;
    GMMx6464.Field.LVTMA_BLON_OVRD = 1;
    GnbRegisterWriteTN (GMMx6464_TYPE, GMMx6464_ADDRESS, &GMMx6464.Value, 0, GnbLibGetHeader (Pcie));
  }

  IDS_HDT_CONSOLE (GNB_TRACE, "DdiEarlyPortInitCallbackTN Exit\n");
}

开发者ID:fishbaoz，项目名称:KaveriPI，代码行数:26，代码来源:PcieEarlyInitTN.c

示例2: PcieEdpPortPowerCheckCZ

AGESA_STATUS
PcieEdpPortPowerCheckCZ (
  IN      AMD_CONFIG_PARAMS               *StdHeader
  )
{
  GMMx1206C_STRUCT      GMMx1206C;
  BOOLEAN               EdpPresent;
  AGESA_STATUS          Status;
  AGESA_STATUS          AgesaStatus;
  PCIe_PLATFORM_CONFIG  *Pcie;
  AgesaStatus = AGESA_SUCCESS;
  IDS_HDT_CONSOLE (GNB_TRACE, "PcieEdpPortPowerCheckCZ Enter\n");
  Status = PcieLocateConfigurationData (StdHeader, &Pcie);
  AGESA_STATUS_UPDATE (Status, AgesaStatus);
  if (Status == AGESA_SUCCESS) {
    EdpPresent = FALSE;
    PcieConfigRunProcForAllEngines (
      DESCRIPTOR_ALLOCATED | DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_VIRTUAL,
      DdiEdpPortDetectCallbackCZ,
      (VOID *)&EdpPresent,
      Pcie
      );
    if (EdpPresent == FALSE) {
      // Power off
      GnbRegisterReadCZ (GnbGetHandle (GnbLibGetHeader (Pcie)), GMMx1206C_TYPE, GMMx1206C_ADDRESS, &GMMx1206C.Value, 0, GnbLibGetHeader (Pcie));
      GMMx1206C.Field.LVTMA_PWRSEQ_EN = 0;
      GMMx1206C.Field.LVTMA_PWRSEQ_TARGET_STATE = 0;
      GMMx1206C.Field.LVTMA_BLON_OVRD = 0;
      GnbRegisterWriteCZ (GnbGetHandle (GnbLibGetHeader (Pcie)), GMMx1206C_TYPE, GMMx1206C_ADDRESS, &GMMx1206C.Value, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Pcie));
    }
  }
  IDS_HDT_CONSOLE (GNB_TRACE, "PcieMidBeforeGfxInitCZ Exit [0x%x]\n", AgesaStatus);
  return  AgesaStatus;
}

开发者ID:fishbaoz，项目名称:CarrizoPI，代码行数:34，代码来源:PcieLibCZ.c

示例3: GfxRequestGPUPowerV3

/**
 * Power Up/Down iGPU
 *
 *
 *
 * @param[in,out]   Gfx            Pointer to GFX configuration
 * @param[in,out]   PowerControl    Control power Up/Down iGPU, 0, power down iGPU, 1, power on iGPU
 * @retval          AGESA_STATUS
 */
AGESA_STATUS
GfxRequestGPUPowerV3 (
  IN OUT   GFX_PLATFORM_CONFIG   *Gfx,
  IN       UINT8                 PowerControl
  )
{
  GNB_HANDLE              *GnbHandle;
  DEV_OBJECT              DevObject;

  GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
  DevObject.DevPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
  DevObject.GnbHandle = GnbHandle;
  DevObject.StdHeader = GnbLibGetHeader (Gfx);

  if (PowerControl == 0) {
    GnbSmuServiceRequestV7 (
      &DevObject,
      SMC_MSG_POWERDOWNGPU,
      0,
      GNB_REG_ACC_FLAG_S3SAVE
      );
  } else {
    GnbSmuServiceRequestV7 (
      &DevObject,
      SMC_MSG_POWERUPGPU,
      0,
      GNB_REG_ACC_FLAG_S3SAVE
      );
  }

  return AGESA_SUCCESS;
}

开发者ID:fishbaoz，项目名称:edk2ml，代码行数:41，代码来源:GfxLibV3.c

示例4: GfxFillNbPStateVid

VOID
GfxFillNbPStateVid (
  IN OUT   ATOM_INTEGRATED_SYSTEM_INFO_V6   *IntegratedInfoTable,
  IN       GFX_PLATFORM_CONFIG              *Gfx
  )
{
  D18F3xDC_STRUCT  D18F3xDC;
  D18F6x90_STRUCT  D18F6x90;

  GnbLibPciRead (
    MAKE_SBDFO ( 0, 0, 0x18, 3, D18F3xDC_ADDRESS),
    AccessWidth32,
    &D18F3xDC.Value,
    GnbLibGetHeader (Gfx)
    );
  IntegratedInfoTable->usNBP0Voltage = (USHORT) D18F3xDC.Field.NbPs0Vid;

  GnbLibPciRead (
    MAKE_SBDFO ( 0, 0, 0x18, 6, D18F6x90_ADDRESS),
    AccessWidth32,
    &D18F6x90.Value,
    GnbLibGetHeader (Gfx)
    );
  IntegratedInfoTable->usNBP1Voltage = (USHORT) D18F6x90.Field.NbPs1Vid;
  IntegratedInfoTable->ulMinimumNClk = GfxLibCalculateClk (
                                         (UINT8) (((D18F6x90.Field.NbPs1NclkDiv != 0) && (D18F6x90.Field.NbPs1NclkDiv < D18F3xDC.Field.NbPs0NclkDiv)) ? D18F6x90.Field.NbPs1NclkDiv : D18F3xDC.Field.NbPs0NclkDiv),
                                         IntegratedInfoTable->ulDentistVCOFreq
                                         );
}

开发者ID:AdriDlu，项目名称:coreboot，代码行数:29，代码来源:GfxIntegratedInfoTableInit.c

示例5: GfxInitSsid

AGESA_STATUS
GfxInitSsid (
  IN      GFX_PLATFORM_CONFIG   *Gfx
  )
{
  AGESA_STATUS    Status;
  UINT32          TempData;
  PCI_ADDR        IgpuAddress;
  PCI_ADDR        HdaudioAddress;

  Status = AGESA_SUCCESS;
  TempData = 0;

  IgpuAddress = Gfx->GfxPciAddress;
  HdaudioAddress = Gfx->GfxPciAddress;
  HdaudioAddress.Address.Function = 1;

  // Set SSID for internal GPU
  if (UserOptions.CfgGnbIGPUSSID != 0) {
    GnbLibPciRMW ((IgpuAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, UserOptions.CfgGnbIGPUSSID, GnbLibGetHeader (Gfx));
  } else {
    GnbLibPciRead (IgpuAddress.AddressValue, AccessS3SaveWidth32, &TempData, GnbLibGetHeader (Gfx));
    GnbLibPciRMW ((IgpuAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, TempData, GnbLibGetHeader (Gfx));
  }

  // Set SSID for internal HD Audio
  if (UserOptions.CfgGnbHDAudioSSID != 0) {
    GnbLibPciRMW ((HdaudioAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, UserOptions.CfgGnbHDAudioSSID, GnbLibGetHeader (Gfx));
  } else {
    GnbLibPciRead (HdaudioAddress.AddressValue, AccessS3SaveWidth32, &TempData, GnbLibGetHeader (Gfx));
    GnbLibPciRMW ((HdaudioAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, TempData, GnbLibGetHeader (Gfx));
  }

  return  Status;
}

开发者ID:AdriDlu，项目名称:coreboot，代码行数:35，代码来源:GnbGfxInitLibV1.c

示例6: PcieAcsCapabilityPortEnableV4

VOID
PcieAcsCapabilityPortEnableV4 (
  IN      PCIe_ENGINE_CONFIG    *Engine,
  IN      PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  DxF0x2A4_STRUCT      DxF0x2A4;

  IDS_HDT_CONSOLE (GNB_TRACE, "PcieAcsCapabilityPortEnableV4 Enter\n");

  //Step 3, Check each individual ACS sub-capability in each port configure space, if the individual capability is implemented, then go to step 4 to enable it
  GnbLibPciRead (
    Engine->Type.Port.Address.AddressValue | DxF0x2A4_ADDRESS,
    AccessWidth32,
    &DxF0x2A4.Value,
    GnbLibGetHeader (Pcie)
   );

  DxF0x2A4.Field.Bitfield_16_16 = DxF0x2A4.Field.Bitfield_0_0;
  DxF0x2A4.Field.Bitfield_17_17 = DxF0x2A4.Field.Bitfield_1_1;

  //Step 4, Enable each individual ACS sub-items in each port configure space
  GnbLibPciWrite (
    Engine->Type.Port.Address.AddressValue | DxF0x2A4_ADDRESS,
    AccessS3SaveWidth32,
    &DxF0x2A4.Value,
    GnbLibGetHeader (Pcie)
   );

  IDS_HDT_CONSOLE (GNB_TRACE, "PcieAcsCapabilityPortEnableV4 Exit\n");
}

开发者ID:fishbaoz，项目名称:KaveriPI，代码行数:31，代码来源:PciePowerMgmtV4.c

示例7: PcieFP2CriteriaTN

AGESA_STATUS
PcieFP2CriteriaTN (
  IN      PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  AGESA_STATUS              Status;
  D18F3x1FC_STRUCT          D18F3x1FC;
  IDS_HDT_CONSOLE (GNB_TRACE, "PcieFP2CriteriaTN Enter\n");

  // PACKAGE_TYPE_FP2    1
  // PACKAGE_TYPE_FS1r2  2
  // PACKAGE_TYPE_FM2    4
  if (LibAmdGetPackageType (GnbLibGetHeader (Pcie)) != PACKAGE_TYPE_FP2) {
    return AGESA_SUCCESS;
  }

  GnbRegisterReadTN (D18F3x1FC_TYPE, D18F3x1FC_ADDRESS, &D18F3x1FC.Value, 0, GnbLibGetHeader (Pcie));
  // FP2 processor link supports Gen2 mode
  if (D18F3x1FC.Field.Fp2PcieGen2Sup == 1) {
    return AGESA_SUCCESS;
  }

  // FP2 force gen1
  Pcie->PsppPolicy = PsppPowerSaving;
  // FP2 only use x8 on the same PHY
  Status = PcieConfigRunProcForAllWrappers (DESCRIPTOR_ALL_WRAPPERS, PcieFP2x8CheckCallbackTN, NULL, Pcie);

  IDS_HDT_CONSOLE (GNB_TRACE, "PcieFP2CriteriaTN Exit\n");
  return Status;
}

开发者ID:fishbaoz，项目名称:KaveriPI，代码行数:30，代码来源:PcieEarlyInitTN.c

示例8: PcieTopologyExecuteReconfigV4

/**
 * Execute/clean up reconfiguration
 *
 *
 * @param[in]  Wrapper             Pointer to wrapper config descriptor
 * @param[in]  Pcie                Pointer to global PCIe configuration
 */
VOID
PcieTopologyExecuteReconfigV4 (
  IN      PCIe_WRAPPER_CONFIG   *Wrapper,
  IN      PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  D0F0xE4_WRAP_8062_STRUCT  D0F0xE4_WRAP_8062;
  PCIe_SILICON_CONFIG       *Silicon;

  if (PcieLibIsPcieWrapper (Wrapper)) {
    IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigV4 Enter\n");

    PcieTopologyInitSrbmReset (FALSE, Wrapper, Pcie);

    D0F0xE4_WRAP_8062.Value = PcieRegisterRead (
                                Wrapper,
                                WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
                                Pcie
                                );
    D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x1;
    PcieRegisterWrite (
      Wrapper,
      WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
      D0F0xE4_WRAP_8062.Value,
      FALSE,
      Pcie
      );

    Silicon = PcieConfigGetParentSilicon (Wrapper);

    GnbLibPciIndirectRMW (
      Silicon->Address.AddressValue | D0F0xB8_ADDRESS,
      D0F0xBC_x1F630_ADDRESS,
      AccessWidth32,
      (UINT32) ~D0F0xBC_x1F630_RECONF_WRAPPER_MASK,
      Wrapper->WrapId << D0F0xBC_x1F630_RECONF_WRAPPER_OFFSET,
      GnbLibGetHeader (Pcie)
      );

    GnbSmuServiceRequestV4 (
      Silicon->Address,
      SMC_MSG_RECONFIGURE,
      0,
      GnbLibGetHeader (Pcie)
      );

    D0F0xE4_WRAP_8062.Field.ConfigXferMode = 0x1;
    D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x0;
    PcieRegisterWrite (
      Wrapper,
      WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
      D0F0xE4_WRAP_8062.Value,
      FALSE,
      Pcie
      );
    PcieTopologyInitSrbmReset (TRUE, Wrapper, Pcie);
    IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigV4 Exit\n");
  }
}

开发者ID:fishbaoz，项目名称:MullinsPI，代码行数:66，代码来源:PcieWrapperServicesV4.c

示例9: GfxSetBootUpVoltageTN

STATIC AGESA_STATUS
GfxSetBootUpVoltageTN (
  IN      GFX_PLATFORM_CONFIG   *Gfx
  )
{
  IDS_HDT_CONSOLE (GNB_TRACE, "GfxSetBootUpVoltageTN Enter\n");
  GfxRequestVoltageTN (GnbLocateHighestVidCode (GnbLibGetHeader (Gfx)), GnbLibGetHeader (Gfx));
  return AGESA_SUCCESS;
}

开发者ID:andy737，项目名称:firebrickRemote，代码行数:9，代码来源:GfxMidInitTN.c

示例10: GfxFillNbPstateMemclkFreqTN

STATIC VOID
GfxFillNbPstateMemclkFreqTN (
  IN OUT   ATOM_INTEGRATED_SYSTEM_INFO_V1_7 *IntegratedInfoTable,
  IN       GFX_PLATFORM_CONFIG              *Gfx
  )
{
  D18F2x94_dct0_STRUCT            D18F2x94;
  D18F2x2E0_dct0_STRUCT           D18F2x2E0;
  D18F5x160_STRUCT                NbPstate;
  UINT8                           i;
  UINT8                           Channel;
  ULONG                           memps0_freq;
  ULONG                           memps1_freq;

  if ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_ON_DCT0) != 0) {
    Channel = 0;
  } else {
    Channel = 1;
  }

  GnbRegisterReadTN (
    ((Channel == 0) ? D18F2x94_dct0_TYPE : D18F2x94_dct1_TYPE),
    ((Channel == 0) ? D18F2x94_dct0_ADDRESS : D18F2x94_dct1_ADDRESS),
    &D18F2x94.Value,
    0,
    GnbLibGetHeader (Gfx)
    );

  GnbRegisterReadTN (
    ((Channel == 0) ? D18F2x2E0_dct0_TYPE : D18F2x2E0_dct1_TYPE),
    ((Channel == 0) ? D18F2x2E0_dct0_ADDRESS : D18F2x2E0_dct1_ADDRESS),
    &D18F2x2E0.Value,
    0,
    GnbLibGetHeader (Gfx)
    );

  memps0_freq = 100 * GfxLibExtractDramFrequency ((UINT8) D18F2x94.Field.MemClkFreq, GnbLibGetHeader (Gfx));
  memps1_freq = 100 * GfxLibExtractDramFrequency ((UINT8) D18F2x2E0.Field.M1MemClkFreq, GnbLibGetHeader (Gfx));

  for (i = 0; i < 4; i++) {
    NbPstate.Value = 0;
    GnbRegisterReadTN (
      TYPE_D18F5,
      (D18F5x160_ADDRESS + (i * 4)),
      &NbPstate.Value,
      0,
      GnbLibGetHeader (Gfx)
      );
    if (NbPstate.Field.NbPstateEn == 1) {
      IntegratedInfoTable->ulNbpStateMemclkFreq[i] = (NbPstate.Field.MemPstate == 0) ? memps0_freq : memps1_freq;
    }
  }

}

开发者ID:B-Rich，项目名称:coreboot，代码行数:54，代码来源:GfxIntegratedInfoTableTN.c

示例11: IoapicEnableCallbackV5

/**
 * Callback to Enable IOAPIC on GNB
 *
 *
 *
 * @param[in]  Descriptor          Silicon descriptor
 * @param[in]  Buffer              Pointer to buffer
 * @param[in]  Pcie                Pointer to global PCIe configuration
 * @retval     AGESA_STATUS
 */
AGESA_STATUS
IoapicEnableCallbackV5 (
  IN       PCIe_DESCRIPTOR_HEADER            *Descriptor,
  IN OUT   VOID                              *Buffer,
  IN       PCIe_PLATFORM_CONFIG              *Pcie
  )
{
  PCI_ADDR            GnbPciAddress;
  D0F0xFC_x00_STRUCT  D0F0xFC_x00;
  UINT32              *AddressPtr;
  UINT32              AddressLow;
  UINT32              AddressHigh;

  D0F0xFC_x00.Value = 0x0;
  D0F0xFC_x00.Field.IoapicEnable = 1;
  // Set the extended ID enable (default)
  D0F0xFC_x00.Field.IoapicIdExtEn = 1;
  // Enable SB feature for every APIC.  ACPI OS may disable this once the OS boots
  D0F0xFC_x00.Field.IoapicSbFeatureEn = 1;
  AddressPtr = (UINT32*) Buffer;
  AddressLow = AddressPtr[0] & 0xFFFFFF00;
  AddressHigh = AddressPtr[1];
  // Get the PCI address of the GNB
  GnbPciAddress = GnbGetHostPciAddress (GnbGetHandle (GnbLibGetHeader (Pcie)));
  // If the BLDCFG base address is null, assume that the base address of the APIC has already been programmed
  // If base address is defined in BLDCFG, program it here
  if ((AddressLow != NULL) || (AddressHigh != NULL)) {
    GnbLibPciIndirectWrite (
      GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
      D0F0xFC_x01_ADDRESS,
      AccessS3SaveWidth32,
      &AddressLow,
      GnbLibGetHeader (Pcie)
      );
    GnbLibPciIndirectWrite (
      GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
      D0F0xFC_x02_ADDRESS,
      AccessS3SaveWidth32,
      &AddressHigh,
      GnbLibGetHeader (Pcie)
      );
    IDS_HDT_CONSOLE (GNB_TRACE, "GNB IOAPIC base address is at high %x, low %x\n", AddressHigh, AddressLow);
    // Enable the IOAPIC.
    GnbLibPciIndirectWrite (
      GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
      D0F0xFC_x00_ADDRESS,
      AccessS3SaveWidth32,
      &D0F0xFC_x00.Value,
      GnbLibGetHeader (Pcie)
      );
  }
  return AGESA_SUCCESS;
}

开发者ID:fishbaoz，项目名称:MullinsPI，代码行数:63，代码来源:GnbIoapic.c

示例12: PcieSiliconRegisterRead

UINT32
PcieSiliconRegisterRead (
  IN      PCIe_SILICON_CONFIG   *Silicon,
  IN      UINT32                Address,
  IN      PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  UINT32              Value;
  GnbLibPciWrite (Silicon->Address.AddressValue | 0xE0, AccessWidth32, &Address, GnbLibGetHeader (Pcie));
  GnbLibPciRead (Silicon->Address.AddressValue | 0xE4, AccessWidth32, &Value, GnbLibGetHeader (Pcie));
  return Value;
}

开发者ID:Godkey，项目名称:coreboot，代码行数:12，代码来源:PcieWrapperRegAcc.c

示例13: PcieTopologyExecuteReconfigV5

/**
 * Execute/clean up reconfiguration
 *
 *
 * @param[in]  Wrapper             Pointer to wrapper config descriptor
 * @param[in]  Pcie                Pointer to global PCIe configuration
 */
VOID
PcieTopologyExecuteReconfigV5 (
  IN      PCIe_WRAPPER_CONFIG   *Wrapper,
  IN      PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  D0F0xE4_WRAP_8062_STRUCT  D0F0xE4_WRAP_8062;
  PCIe_SILICON_CONFIG       *Silicon;
  DEV_OBJECT                DevObject;

  if (PcieLibIsPcieWrapper (Wrapper)) {
    IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigV5 Enter\n");

    D0F0xE4_WRAP_8062.Value = PcieRegisterRead (
                                Wrapper,
                                WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
                                Pcie
                                );
    D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x1;
    D0F0xE4_WRAP_8062.Field.ResetPeriod = 0x0;
    PcieRegisterWrite (
      Wrapper,
      WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
      D0F0xE4_WRAP_8062.Value,
      FALSE,
      Pcie
      );

    Silicon = PcieConfigGetParentSilicon (Wrapper);
    DevObject.StdHeader = GnbLibGetHeader (Pcie);
    DevObject.GnbHandle = GnbGetHandle (GnbLibGetHeader (Pcie));
    DevObject.DevPciAddress.AddressValue = Silicon->Address.AddressValue;
    GnbSmuServiceRequestV7 (
      &DevObject,
      SMC_MSG_RECONFIGURE,
      Wrapper->WrapId,
      0
      );

    D0F0xE4_WRAP_8062.Field.ConfigXferMode = 0x1;
    D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x0;
    PcieRegisterWrite (
      Wrapper,
      WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
      D0F0xE4_WRAP_8062.Value,
      FALSE,
      Pcie
      );

    IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigV5 Exit\n");
  }
}

开发者ID:fishbaoz，项目名称:edk2ml，代码行数:59，代码来源:PcieWrapperServicesV5.c

示例14: GfxFillNbPStateVidTN

STATIC VOID
GfxFillNbPStateVidTN (
  IN OUT   ATOM_INTEGRATED_SYSTEM_INFO_V1_7 *IntegratedInfoTable,
  IN       GFX_PLATFORM_CONFIG              *Gfx
  )
{
  //TN Register Mapping for D18F5x1[6C:60]
  D18F5x160_STRUCT  NbPstate[4];
  D0F0xBC_x1F428_STRUCT  D0F0xBC_x1F428;
  UINT8             MinNclkIndex;
  UINT8             i;

  MinNclkIndex = 0;
  IntegratedInfoTable->ucNBDPMEnable = 0;


  GnbRegisterReadTN (
    D0F0xBC_x1F428_TYPE,
    D0F0xBC_x1F428_ADDRESS,
    &D0F0xBC_x1F428.Value,
    0,
    GnbLibGetHeader (Gfx)
  );
  // Check if NbPstate enbale
  if (D0F0xBC_x1F428.Field.EnableNbDpm == 1) {
    //1: enable 0: not enable
    IntegratedInfoTable->ucNBDPMEnable = 1;
  }

  for (i = 0; i < 4; i++) {
    GnbRegisterReadTN (
      TYPE_D18F5,
      (D18F5x160_ADDRESS + (i * 4)),
      &NbPstate[i].Value,
      0,
      GnbLibGetHeader (Gfx)
    );
    if (NbPstate[i].Field.NbPstateEn == 1) {
      MinNclkIndex = i;
    }
    IntegratedInfoTable->ulNbpStateNClkFreq[i] = GfxLibGetNclkTN ((UINT8) NbPstate[i].Field.NbFid, (UINT8) NbPstate[i].Field.NbDid);
  }
  IntegratedInfoTable->usNBP0Voltage = (USHORT) ((NbPstate[0].Field.NbVid_7_ << 7) | NbPstate[0].Field.NbVid_6_0_);
  IntegratedInfoTable->usNBP1Voltage = (USHORT) ((NbPstate[1].Field.NbVid_7_ << 7) | NbPstate[1].Field.NbVid_6_0_);
  IntegratedInfoTable->usNBP2Voltage = (USHORT) ((NbPstate[2].Field.NbVid_7_ << 7) | NbPstate[2].Field.NbVid_6_0_);
  IntegratedInfoTable->usNBP3Voltage = (USHORT) ((NbPstate[3].Field.NbVid_7_ << 7) | NbPstate[3].Field.NbVid_6_0_);

  IntegratedInfoTable->ulMinimumNClk = GfxLibGetNclkTN ((UINT8) NbPstate[MinNclkIndex].Field.NbFid, (UINT8) NbPstate[MinNclkIndex].Field.NbDid);
}

开发者ID:B-Rich，项目名称:coreboot，代码行数:49，代码来源:GfxIntegratedInfoTableTN.c

示例15: PcieCompletionTimeout

VOID
PcieCompletionTimeout (
  IN      PCIe_ENGINE_CONFIG    *Engine,
  IN      PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  GnbLibPciRMW (
    Engine->Type.Port.Address.AddressValue | DxF0x80_ADDRESS,
    AccessWidth32,
    0xffffffff,
    0x6 << DxF0x80_CplTimeoutValue_OFFSET,
    GnbLibGetHeader (Pcie)
    );
  if (Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled) {
    PciePortRegisterWriteField (
      Engine,
      DxF0xE4_x20_ADDRESS,
      DxF0xE4_x20_TxFlushTlpDis_OFFSET,
      DxF0xE4_x20_TxFlushTlpDis_WIDTH,
      0x0,
      TRUE,
      Pcie
      );
  }
}

开发者ID:fishbaoz，项目名称:edk2ml，代码行数:25，代码来源:PciePortServices.c

示例16: PcieUtilGetLinkHwStateHistory

VOID
PcieUtilGetLinkHwStateHistory (
  IN       PCIe_ENGINE_CONFIG        *Engine,
     OUT   UINT8                     *History,
  IN       UINT8                     Length,
  IN       PCIe_PLATFORM_CONFIG      *Pcie
  )
{
  UINT8   ReadLength;
  UINT32  LocalHistory [6];
  UINT16  Index;
  ASSERT (Length <= 16);
  ASSERT (Length > 0);
  if (Length > 6*4) {
    Length = 6*4;
  }
  ReadLength = (Length + 3) / 4;
  for (Index = 0; Index < ReadLength; Index++) {
    LocalHistory[Index] = PciePortRegisterRead (
                            Engine,
                            DxF0xE4_xA5_ADDRESS + Index,
                            Pcie
                            );
  }
  LibAmdMemCopy (History, LocalHistory, Length, GnbLibGetHeader (Pcie));
}

开发者ID:fishbaoz，项目名称:CarrizoPI，代码行数:26，代码来源:PcieUtilityLib.c

示例17: PcieSiliconEnablePortsV5

VOID
STATIC
PcieSiliconEnablePortsV5 (
  IN      PCIe_SILICON_CONFIG   *Silicon,
  IN      PCIe_PLATFORM_CONFIG  *Pcie
  )
{
  PCIe_ENGINE_CONFIG  *EngineList;
  EngineList = PcieConfigGetChildEngine (Silicon);
  while (EngineList != NULL) {
    if (PcieConfigIsPcieEngine (EngineList)) {
      if (!PcieConfigIsSbPcieEngine (EngineList) &&
        (PcieConfigCheckPortStatus (EngineList, INIT_STATUS_PCIE_TRAINING_SUCCESS) ||
        ((EngineList->Type.Port.PortData.LinkHotplug != HotplugDisabled) &&
        (EngineList->Type.Port.PortData.LinkHotplug != HotplugInboard)))) {
        GnbLibPciIndirectRMW (
          Silicon->Address.AddressValue | D0F0xC8_ADDRESS,
          D0F0xCC_x01_ADDRESS | ((EngineList->Type.Port.PortData.DeviceNumber << 3 | EngineList->Type.Port.PortData.FunctionNumber)  << D0F0xC8_NB_DEV_IND_SEL_OFFSET),
          AccessS3SaveWidth32,
          (UINT32)~(D0F0xCC_x01_BridgeDis_MASK | D0F0xCC_x01_CfgDis_MASK | D0F0xCC_x01_CsrEnable_MASK | D0F0xCC_x01_SetPowEn_MASK),
          ((1 << D0F0xCC_x01_CsrEnable_OFFSET) | (1 << D0F0xCC_x01_SetPowEn_OFFSET)),
          GnbLibGetHeader (Pcie)
        );
      }
    }
    EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (EngineList, DESCRIPTOR_TERMINATE_GNB);
  }
}

开发者ID:fishbaoz，项目名称:CarrizoPI，代码行数:28，代码来源:PcieSiliconServicesV5.c

示例18: PcieSiliconControlPortsV5

VOID
STATIC
PcieSiliconControlPortsV5 (
  IN      PCIE_PORT_VISIBILITY    Control,
  IN      PCIe_SILICON_CONFIG     *Silicon,
  IN      PCIe_PLATFORM_CONFIG    *Pcie
  )
{
  PCIe_ENGINE_CONFIG  *EngineList;
  UINT32              Value;
  Value = (Control == HidePorts) ? ((1 << D0F0xCC_x01_BridgeDis_OFFSET) | (1 << D0F0xCC_x01_CfgDis_OFFSET)) : 0;
  Value |= (1 << D0F0xCC_x01_CsrEnable_OFFSET) | (1 << D0F0xCC_x01_SetPowEn_OFFSET);
  EngineList = PcieConfigGetChildEngine (Silicon);
  while (EngineList != NULL) {
    if (PcieConfigIsPcieEngine (EngineList)) {
      GnbLibPciIndirectRMW (
        Silicon->Address.AddressValue | D0F0xC8_ADDRESS,
        D0F0xCC_x01_ADDRESS | ((EngineList->Type.Port.NativeDevNumber << 3 | EngineList->Type.Port.NativeFunNumber) << D0F0xC8_NB_DEV_IND_SEL_OFFSET),
        AccessS3SaveWidth32,
        (UINT32)~(D0F0xCC_x01_BridgeDis_MASK | D0F0xCC_x01_CfgDis_MASK | D0F0xCC_x01_CsrEnable_MASK | D0F0xCC_x01_SetPowEn_MASK),
        Value,
        GnbLibGetHeader (Pcie)
        );
    }
    EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (EngineList, DESCRIPTOR_TERMINATE_GNB);
  }
}

开发者ID:fishbaoz，项目名称:CarrizoPI，代码行数:27，代码来源:PcieSiliconServicesV5.c

示例19: GfxIntegratedEnumerateAudioConnectors

/**
 * Enumerate all display connectors with audio capability and configure number of ports
 *
 *
 *
 * @param[in]     Gfx             Gfx configuration info
 */
AGESA_STATUS
GfxIntegratedEnumerateAudioConnectors (
  IN      GFX_PLATFORM_CONFIG         *Gfx
  )
{
  UINT8                   AudioCount;
  AGESA_STATUS            Status;
  GMMx5F50_STRUCT         GMMx5F50;
  PCIe_PLATFORM_CONFIG    *Pcie;
  IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntegratedEnumerateAudioConnectors Enter\n");

  Status = PcieLocateConfigurationData (GnbLibGetHeader (Gfx), &Pcie);
  if ((Status == AGESA_SUCCESS) && (Gfx->GnbHdAudio != 0)) {
    AudioCount = 0;
    PcieConfigRunProcForAllEngines (
      DESCRIPTOR_ALLOCATED | DESCRIPTOR_VIRTUAL | DESCRIPTOR_DDI_ENGINE,
      GfxIntegratedAudioEnumCallback,
      &AudioCount,
      Pcie
      );
    if (AudioCount > 4) {
      AudioCount = 4;
    }
    GMMx5F50.Value = 0x00;
    GMMx5F50.Field.PortConnectivity = (7 - AudioCount);
    GMMx5F50.Field.PortConnectivityOverrideEnable = 1;
    GnbRegisterWriteTN (GMMx5F50_TYPE, GMMx5F50_ADDRESS, &GMMx5F50.Value, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
  }
  IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntegratedEnumerateAudioConnectors Exit\n");
  return Status;
}

开发者ID:andy737，项目名称:firebrickRemote，代码行数:38，代码来源:GfxMidInitTN.c

示例20: GfxIntAudioEPEnumV5

/**
 * Enumerate audio endpoint in all display connectors.
 *
 *
 *
 * @param[in]       Gfx             Gfx configuration info
 * @param[in, out]  AudioEPCount    Total Audio endpoint number
 * @retval          AGESA_STATUS
 */
AGESA_STATUS
GfxIntAudioEPEnumV5 (
  IN       GFX_PLATFORM_CONFIG    *Gfx,
  IN OUT   UINT8                  *AudioEPCount
  )
{
  UINT8                   NumAudioEp;
  AGESA_STATUS            Status;
  PCIe_PLATFORM_CONFIG    *Pcie;

  IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntAudioEPEnumV5 Enter\n");

  NumAudioEp = 0;
  Status = PcieLocateConfigurationData (GnbLibGetHeader (Gfx), &Pcie);
  if ((Status == AGESA_SUCCESS) && (Gfx->GnbHdAudio != 0)) {
    PcieConfigRunProcForAllEngines (
      DESCRIPTOR_ALLOCATED | DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_VIRTUAL,
      GfxIntAudioEpEnumCallback,
      &NumAudioEp,
      Pcie
      );

    if (Gfx->GnbRemoteDisplaySupport) {
      NumAudioEp++;
    }
  }

  *AudioEPCount = NumAudioEp;
  IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntAudioEPEnumV5 Exit\n");
  return Status;
}

开发者ID:fishbaoz，项目名称:CarrizoPI，代码行数:40，代码来源:GfxLibV5.c

注：本文中的GnbLibGetHeader函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Go函数代码示例发布时间：2022-05-30

C++ GlobusXIOName函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19210|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9994|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8330|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8699|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8642|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9662|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8627|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8003|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8659|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ GnbLibGetHeader函数代码示例

示例1: DdiEarlyPortInitCallbackTN

示例2: PcieEdpPortPowerCheckCZ

示例3: GfxRequestGPUPowerV3

示例4: GfxFillNbPStateVid

示例5: GfxInitSsid

示例6: PcieAcsCapabilityPortEnableV4

示例7: PcieFP2CriteriaTN

示例8: PcieTopologyExecuteReconfigV4

示例9: GfxSetBootUpVoltageTN

示例10: GfxFillNbPstateMemclkFreqTN

示例11: IoapicEnableCallbackV5

示例12: PcieSiliconRegisterRead

示例13: PcieTopologyExecuteReconfigV5

示例14: GfxFillNbPStateVidTN

示例15: PcieCompletionTimeout

示例16: PcieUtilGetLinkHwStateHistory

示例17: PcieSiliconEnablePortsV5

示例18: PcieSiliconControlPortsV5

示例19: GfxIntegratedEnumerateAudioConnectors

示例20: GfxIntAudioEPEnumV5

请发表评论

全部评论

上一篇：

下一篇：

skyhacker2/SnakeGameLua: 使用cocos2d-x l

thelamehacker/macOS-toolkit: A collectio

jamesorr/CO2SYS-MATLAB: CO2SYS software

Fruzenshtein/MobileApp: Test Spring appl

避免微信小程序中的图片缓存 - 比你打又点

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053