C++ GetValueFromNameValueList函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetValueFromNameValueList函数的典型用法代码示例。如果您正苦于以下问题：C++ GetValueFromNameValueList函数的具体用法？C++ GetValueFromNameValueList怎么用？C++ GetValueFromNameValueList使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetValueFromNameValueList函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: UPNP_GetConnectionTypeInfo

/* UPNP_GetConnectionTypeInfo() call the corresponding UPNP method
 * returns the connection type */
LIBSPEC int
UPNP_GetConnectionTypeInfo(const char * controlURL,
                           const char * servicetype,
                           char * connectionType)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * p;
	int ret = UPNPCOMMAND_UNKNOWN_ERROR;

	if(!connectionType)
		return UPNPCOMMAND_INVALID_ARGS;

	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "GetConnectionTypeInfo", 0, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	p = GetValueFromNameValueList(&pdata, "NewConnectionType");
	/*p = GetValueFromNameValueList(&pdata, "NewPossibleConnectionTypes");*/
	/* PossibleConnectionTypes will have several values.... */
	if(p) {
		strncpy(connectionType, p, 64 );
		connectionType[63] = '\0';
		ret = UPNPCOMMAND_SUCCESS;
	} else
		connectionType[0] = '\0';
	p = GetValueFromNameValueList(&pdata, "errorCode");
	if(p) {
		ret = UPNPCOMMAND_UNKNOWN_ERROR;
		sscanf(p, "%d", &ret);
	}
	ClearNameValueList(&pdata);
	return ret;
}

开发者ID:ProfDrLuigi，项目名称:wired，代码行数:36，代码来源:upnpcommands.c

示例2: UPNP_GetExternalIPAddress

/* UPNP_GetExternalIPAddress() call the corresponding UPNP method.
 * if the third arg is not null the value is copied to it.
 * at least 16 bytes must be available
 * 
 * Return values :
 * 0 : SUCCESS
 * NON ZERO : ERROR Either an UPnP error code or an unknown error.
 *
 * 402 Invalid Args - See UPnP Device Architecture section on Control.
 * 501 Action Failed - See UPnP Device Architecture section on Control.
 */
LIBSPEC int
UPNP_GetExternalIPAddress(const char * controlURL,
                          const char * servicetype,
                          char * extIpAdd)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * p;
	int ret = UPNPCOMMAND_UNKNOWN_ERROR;

	if(!extIpAdd || !controlURL || !servicetype)
		return UPNPCOMMAND_INVALID_ARGS;

	simpleUPnPcommand(-1, controlURL, servicetype, "GetExternalIPAddress", 0, buffer, &bufsize);
	/*DisplayNameValueList(buffer, bufsize);*/
	ParseNameValue(buffer, bufsize, &pdata);
	/*printf("external ip = %s\n", GetValueFromNameValueList(&pdata, "NewExternalIPAddress") );*/
	p = GetValueFromNameValueList(&pdata, "NewExternalIPAddress");
	if(p) {
		strncpy(extIpAdd, p, 16 );
		extIpAdd[15] = '\0';
		ret = UPNPCOMMAND_SUCCESS;
	} else
		extIpAdd[0] = '\0';

	p = GetValueFromNameValueList(&pdata, "errorCode");
	if(p) {
		ret = UPNPCOMMAND_UNKNOWN_ERROR;
		sscanf(p, "%d", &ret);
	}

	ClearNameValueList(&pdata);
	return ret;
}

开发者ID:ProfDrLuigi，项目名称:wired，代码行数:46，代码来源:upnpcommands.c

示例3: UPNP_GetPortMappingNumberOfEntries

LIBSPEC int
UPNP_GetPortMappingNumberOfEntries(const char * controlURL,
                                   const char * servicetype,
                                   unsigned int * numEntries)
{
 	struct NameValueParserData pdata;
 	char buffer[4096];
 	int bufsize = 4096;
 	char* p;
	int ret = UPNPCOMMAND_UNKNOWN_ERROR;
 	simpleUPnPcommand(-1, controlURL, servicetype, "GetPortMappingNumberOfEntries", 0, buffer, &bufsize);
#ifdef DEBUG
	DisplayNameValueList(buffer, bufsize);
#endif
 	ParseNameValue(buffer, bufsize, &pdata);

 	p = GetValueFromNameValueList(&pdata, "NewPortMappingNumberOfEntries");
 	if(numEntries && p) {
		*numEntries = 0;
 		sscanf(p, "%u", numEntries);
		ret = UPNPCOMMAND_SUCCESS;
 	}

	p = GetValueFromNameValueList(&pdata, "errorCode");
	if(p) {
		ret = UPNPCOMMAND_UNKNOWN_ERROR;
		sscanf(p, "%d", &ret);
	}

 	ClearNameValueList(&pdata);
	return ret;
}

开发者ID:ProfDrLuigi，项目名称:wired，代码行数:32，代码来源:upnpcommands.c

示例4: UPNP_GetStatusInfo

/* UPNP_GetStatusInfo() call the corresponding UPNP method
 * returns the current status and uptime */
LIBSPEC int
UPNP_GetStatusInfo(const char * controlURL,
				const char * servicetype,
				char * status, 
				unsigned int * uptime,
				char * lastconnerror)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * p;
	char * up;
	char * err;
	int ret = UPNPCOMMAND_UNKNOWN_ERROR;

	if(!status && !uptime)
		return UPNPCOMMAND_INVALID_ARGS;

	simpleUPnPcommand(-1, controlURL, servicetype, "GetStatusInfo", 0, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	/*DisplayNameValueList(buffer, bufsize);*/
	up = GetValueFromNameValueList(&pdata, "NewUptime");
	p = GetValueFromNameValueList(&pdata, "NewConnectionStatus");
	err = GetValueFromNameValueList(&pdata, "NewLastConnectionError");
	if(p && up)
	  ret = UPNPCOMMAND_SUCCESS;

	if(status) {
		if(p){
			strncpy(status, p, 64 );
			status[63] = '\0';
		}else
			status[0]= '\0';
	}

	if(uptime) {
		if(up)
			sscanf(up,"%u",uptime);
		else
			uptime = 0;
	}

	if(lastconnerror) {
		if(err) {
			strncpy(lastconnerror, err, 64 );
			lastconnerror[63] = '\0';
		} else
			lastconnerror[0] = '\0';
	}

	p = GetValueFromNameValueList(&pdata, "errorCode");
	if(p) {
		ret = UPNPCOMMAND_UNKNOWN_ERROR;
		sscanf(p, "%d", &ret);
	}
	ClearNameValueList(&pdata);
	return ret;
}

开发者ID:ProfDrLuigi，项目名称:wired，代码行数:60，代码来源:upnpcommands.c

示例5: UPNP_GetLinkLayerMaxBitRates

/* UPNP_GetLinkLayerMaxBitRate() call the corresponding UPNP method.
 * Returns 2 values: Downloadlink bandwidth and Uplink bandwidth.
 * One of the values can be null
 * Note : GetLinkLayerMaxBitRates belongs to WANPPPConnection:1 only
 * We can use the GetCommonLinkProperties from WANCommonInterfaceConfig:1 */
LIBSPEC int
UPNP_GetLinkLayerMaxBitRates(const char * controlURL,
                             const char * servicetype,
                             unsigned int * bitrateDown,
                             unsigned int * bitrateUp)
{
    struct NameValueParserData pdata;
    char * buffer;
    int bufsize;
    int ret = UPNPCOMMAND_UNKNOWN_ERROR;
    char * down;
    char * up;
    char * p;

    if(!bitrateDown && !bitrateUp)
        return UPNPCOMMAND_INVALID_ARGS;

    /* shouldn't we use GetCommonLinkProperties ? */
    if(!(buffer = simpleUPnPcommand(-1, controlURL, servicetype,
                                    "GetCommonLinkProperties", 0, &bufsize))) {
        /*"GetLinkLayerMaxBitRates", 0, &bufsize);*/
        return UPNPCOMMAND_HTTP_ERROR;
    }
    /*DisplayNameValueList(buffer, bufsize);*/
    ParseNameValue(buffer, bufsize, &pdata);
    free(buffer);
    buffer = NULL;
    /*down = GetValueFromNameValueList(&pdata, "NewDownstreamMaxBitRate");*/
    /*up = GetValueFromNameValueList(&pdata, "NewUpstreamMaxBitRate");*/
    down = GetValueFromNameValueList(&pdata, "NewLayer1DownstreamMaxBitRate");
    up = GetValueFromNameValueList(&pdata, "NewLayer1UpstreamMaxBitRate");
    /*GetValueFromNameValueList(&pdata, "NewWANAccessType");*/
    /*GetValueFromNameValueList(&pdata, "NewPhysicalLinkStatus");*/
    if(down && up)
        ret = UPNPCOMMAND_SUCCESS;

    if(bitrateDown) {
        if(down)
            sscanf(down,"%u",bitrateDown);
        else
            *bitrateDown = 0;
    }

    if(bitrateUp) {
        if(up)
            sscanf(up,"%u",bitrateUp);
        else
            *bitrateUp = 0;
    }
    p = GetValueFromNameValueList(&pdata, "errorCode");
    if(p) {
        ret = UPNPCOMMAND_UNKNOWN_ERROR;
        sscanf(p, "%d", &ret);
    }
    ClearNameValueList(&pdata);
    return ret;
}

开发者ID:wdmchaft，项目名称:Psybrus，代码行数:62，代码来源:upnpcommands.c

示例6: UPNP_GetSpecificPortMappingEntry

/* UPNP_GetSpecificPortMappingEntry retrieves an existing port mapping
 * the result is returned in the intClient and intPort strings
 * please provide 16 and 6 bytes of data */
LIBSPEC int
UPNP_GetSpecificPortMappingEntry(const char * controlURL,
                                 const char * servicetype,
                                 const char * extPort,
							     const char * proto,
                                 char * intClient,
                                 char * intPort)
{
	struct NameValueParserData pdata;
	struct UPNParg * GetPortMappingArgs;
	char buffer[4096];
	int bufsize = 4096;
	char * p;
	int ret = UPNPCOMMAND_UNKNOWN_ERROR;

	if(!intPort || !intClient || !extPort || !proto)
		return UPNPCOMMAND_INVALID_ARGS;

	GetPortMappingArgs = calloc(4, sizeof(struct UPNParg));
	GetPortMappingArgs[0].elt = "NewRemoteHost";
	GetPortMappingArgs[1].elt = "NewExternalPort";
	GetPortMappingArgs[1].val = extPort;
	GetPortMappingArgs[2].elt = "NewProtocol";
	GetPortMappingArgs[2].val = proto;
	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "GetSpecificPortMappingEntry",
					  GetPortMappingArgs, buffer, &bufsize);
	/*fd = simpleUPnPcommand(fd, controlURL, data.servicetype, "GetSpecificPortMappingEntry", AddPortMappingArgs, buffer, &bufsize); */
	/*DisplayNameValueList(buffer, bufsize);*/
	ParseNameValue(buffer, bufsize, &pdata);

	p = GetValueFromNameValueList(&pdata, "NewInternalClient");
	if(p) {
		strncpy(intClient, p, 16);
		intClient[15] = '\0';
		ret = UPNPCOMMAND_SUCCESS;
	} else
		intClient[0] = '\0';

	p = GetValueFromNameValueList(&pdata, "NewInternalPort");
	if(p) {
		strncpy(intPort, p, 6);
		intPort[5] = '\0';
	} else
		intPort[0] = '\0';

	p = GetValueFromNameValueList(&pdata, "errorCode");
	if(p) {
		ret = UPNPCOMMAND_UNKNOWN_ERROR;
		sscanf(p, "%d", &ret);
	}

	ClearNameValueList(&pdata);
	free(GetPortMappingArgs);
	return ret;
}

开发者ID:ProfDrLuigi，项目名称:wired，代码行数:59，代码来源:upnpcommands.c

示例7: UPNP_GetSpecificPortMappingEntry

/* UPNP_GetSpecificPortMappingEntry retrieves an existing port mapping
 * the result is returned in the intClient and intPort strings
 * please provide 16 and 6 bytes of data */
void
UPNP_GetSpecificPortMappingEntry(const char * controlURL,
                                 const char * servicetype,
                                 const char * extPort,
							     const char * proto,
                                 char * intClient,
                                 char * intPort)
{
	struct NameValueParserData pdata;
	struct UPNParg * GetPortMappingArgs;
	char buffer[4096];
	int bufsize = 4096;
	char * p;

	if(!intPort && !intClient && !extPort)
		return;

	GetPortMappingArgs = calloc(4, sizeof(struct UPNParg));
	GetPortMappingArgs[0].elt = "NewRemoteHost";
	GetPortMappingArgs[1].elt = "NewExternalPort";
	GetPortMappingArgs[1].val = extPort;
	GetPortMappingArgs[2].elt = "NewProtocol";
	GetPortMappingArgs[2].val = proto;
	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "GetSpecificPortMappingEntry",
					  GetPortMappingArgs, buffer, &bufsize);
	/*fd = simpleUPnPcommand(fd, controlURL, data.servicetype, "GetSpecificPortMappingEntry", AddPortMappingArgs, buffer, &bufsize); */
	/*DisplayNameValueList(buffer, bufsize);*/
	ParseNameValue(buffer, bufsize, &pdata);
	p = GetValueFromNameValueList(&pdata, "NewInternalClient");

	if(intClient)
	{
		if(p){
			strncpy(intClient, p, 16);
			intClient[15] = '\0';
		}else
			intClient[0] = '\0';
	}

	p = GetValueFromNameValueList(&pdata, "NewInternalPort");
	if(intPort)
	{
		if(p){
			strncpy(intPort, p, 6);
			intPort[5] = '\0';
		}else
			intPort[0] = '\0';
	}

	ClearNameValueList(&pdata);
	free(GetPortMappingArgs);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:56，代码来源:upnpcommands.c

示例8: UPNP_GetExternalIPAddress

/* UPNP_GetExternalIPAddress() call the corresponding UPNP method.
 * if the third arg is not null the value is copied to it.
 * at least 16 bytes must be available */
void UPNP_GetExternalIPAddress(const char * controlURL, const char * servicetype, char * extIpAdd)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * p;

	if(!extIpAdd)
		return;

	simpleUPnPcommand(-1, controlURL, servicetype, "GetExternalIPAddress", 0, buffer, &bufsize);
	/*fd = simpleUPnPcommand(fd, controlURL, data.servicetype, "GetExternalIPAddress", 0, buffer, &bufsize);*/
	/*DisplayNameValueList(buffer, bufsize);*/
	ParseNameValue(buffer, bufsize, &pdata);
	/*printf("external ip = %s\n", GetValueFromNameValueList(&pdata, "NewExternalIPAddress") );*/
	p = GetValueFromNameValueList(&pdata, "NewExternalIPAddress");

	if(p){
		strncpy(extIpAdd, p, 16 );
		extIpAdd[15] = '\0';
	}else
		extIpAdd[0] = '\0';

	ClearNameValueList(&pdata);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:28，代码来源:upnpcommands.c

示例9: UPNP_GetConnectionTypeInfo

/* UPNP_GetConnectionTypeInfo() call the corresponding UPNP method
 * returns the connection type */
void UPNP_GetConnectionTypeInfo(const char * controlURL,
                                const char * servicetype,
								char * connectionType)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * p;

	if(!connectionType)
		return;


	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "GetConnectionTypeInfo", 0, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	p = GetValueFromNameValueList(&pdata, "NewConnectionType");
	/*p = GetValueFromNameValueList(&pdata, "NewPossibleConnectionTypes");*/
	/* PossibleConnectionTypes will have several values.... */
	if(connectionType)
	{
		if(p){
			strncpy(connectionType, p, 64 );
			connectionType[63] = '\0';
		}	else
			connectionType[0] = '\0';
	}
	ClearNameValueList(&pdata);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:31，代码来源:upnpcommands.c

示例10: UPNP_AddPortMapping

LIBSPEC int
UPNP_AddPortMapping(const char * controlURL, const char * servicetype,
                    const char * extPort,
					const char * inPort,
					const char * inClient,
					const char * desc,
					const char * proto,
                    const char * remoteHost,
                    const char * leaseDuration)
{
	struct UPNParg * AddPortMappingArgs;
	char * buffer;
	int bufsize;
	struct NameValueParserData pdata;
	const char * resVal;
	int ret;

	if(!inPort || !inClient || !proto || !extPort)
		return UPNPCOMMAND_INVALID_ARGS;

	AddPortMappingArgs = calloc(9, sizeof(struct UPNParg)); // TODO - заказываем 9?
	AddPortMappingArgs[0].elt = "NewRemoteHost";
	AddPortMappingArgs[0].val = remoteHost;
	AddPortMappingArgs[1].elt = "NewExternalPort";
	AddPortMappingArgs[1].val = extPort;
	AddPortMappingArgs[2].elt = "NewProtocol";
	AddPortMappingArgs[2].val = proto;
	AddPortMappingArgs[3].elt = "NewInternalPort";
	AddPortMappingArgs[3].val = inPort;
	AddPortMappingArgs[4].elt = "NewInternalClient";
	AddPortMappingArgs[4].val = inClient;
	AddPortMappingArgs[5].elt = "NewEnabled";
	AddPortMappingArgs[5].val = "1";
	AddPortMappingArgs[6].elt = "NewPortMappingDescription";
	AddPortMappingArgs[6].val = desc?desc:"libminiupnpc";
	AddPortMappingArgs[7].elt = "NewLeaseDuration";
	AddPortMappingArgs[7].val = leaseDuration?leaseDuration:"0";
	if(!(buffer = simpleUPnPcommand(-1, controlURL, servicetype,
	                                "AddPortMapping", AddPortMappingArgs,
	                                &bufsize))) {
		free(AddPortMappingArgs);
		return UPNPCOMMAND_HTTP_ERROR;
	}
	/*DisplayNameValueList(buffer, bufsize);*/
	/*buffer[bufsize] = '\0';*/
	/*puts(buffer);*/
	ParseNameValue(buffer, bufsize, &pdata);
	free(buffer); buffer = NULL;
	resVal = GetValueFromNameValueList(&pdata, "errorCode");
	if(resVal) {
		/*printf("AddPortMapping errorCode = '%s'\n", resVal); */
		ret = UPNPCOMMAND_UNKNOWN_ERROR;
		sscanf(resVal, "%d", &ret);
	} else {
		ret = UPNPCOMMAND_SUCCESS;
	}
	ClearNameValueList(&pdata);
	free(AddPortMappingArgs);
	return ret;
}

开发者ID:snarkus，项目名称:flylinkdc-r5xx，代码行数:60，代码来源:upnpcommands.c

示例11: soap

/* soap callback */
static void soap(int code, upnpc_t * p, upnpc_device_t * d, void * data)
{
	(void)data; (void)p;

	printf("SOAP ! %d\n", code);
	if(code == 200) {
		switch(state) {
		case EGetStatusInfo:
			printf("ConnectionStatus=%s\n", GetValueFromNameValueList(&d->soap_response_data, "NewConnectionStatus"));
			printf("LastConnectionError=%s\n", GetValueFromNameValueList(&d->soap_response_data, "NewLastConnectionError"));
			printf("Uptime=%s\n", GetValueFromNameValueList(&d->soap_response_data, "NewUptime"));
			upnpc_get_external_ip_address(d);
			state = EGetExtIp;
			break;
		case EGetExtIp:
			printf("ExternalIpAddress=%s\n", GetValueFromNameValueList(&d->soap_response_data, "NewExternalIPAddress"));
			upnpc_get_link_layer_max_rate(d);
			state = EGetMaxRate;
			break;
		case EGetMaxRate:
			printf("DownStream MaxBitRate = %s\t", GetValueFromNameValueList(&d->soap_response_data, "NewLayer1DownstreamMaxBitRate"));
			upnpc_add_port_mapping(d, NULL, 60001, 60002, local_address, "TCP", "test port mapping", 0);
			printf("UpStream MaxBitRate = %s\n", GetValueFromNameValueList(&d->soap_response_data, "NewLayer1UpstreamMaxBitRate"));
			state = EAddPortMapping;
			break;
		case EAddPortMapping:
			printf("AddPortMapping OK!\n");
			upnpc_delete_port_mapping(d, NULL, 60001, "TCP");
			state = EDeletePortMapping;
			break;
		case EDeletePortMapping:
			printf("DeletePortMapping OK!\n");
			state = EFinished;
			break;
		default:
			printf("EFinished : breaking\n");
			event_base_loopbreak(base);
		}
	} else {
		printf("SOAP error :\n");
		printf("  faultcode='%s'\n", GetValueFromNameValueList(&d->soap_response_data, "faultcode"));
		printf("  faultstring='%s'\n", GetValueFromNameValueList(&d->soap_response_data, "faultstring"));
		printf("  errorCode=%s\n", GetValueFromNameValueList(&d->soap_response_data, "errorCode"));
		printf("  errorDescription='%s'\n", GetValueFromNameValueList(&d->soap_response_data, "errorDescription"));
		event_base_loopbreak(base);
	}
}

开发者ID:HSAnet，项目名称:miniupnp，代码行数:48，代码来源:upnpc-libevent.c

示例12: UPNP_GetFirewallStatus

/* IGD:2, functions for service WANIPv6FirewallControl:1 */
LIBSPEC int
UPNP_GetFirewallStatus(const char * controlURL,
                       const char * servicetype,
                       int * firewallEnabled,
                       int * inboundPinholeAllowed)
{
    struct NameValueParserData pdata;
    char * buffer;
    int bufsize;
    char * fe, *ipa, *p;
    int ret = UPNPCOMMAND_UNKNOWN_ERROR;

    if(!firewallEnabled && !inboundPinholeAllowed)
        return UPNPCOMMAND_INVALID_ARGS;

    buffer = simpleUPnPcommand(-1, controlURL, servicetype,
                               "GetFirewallStatus", 0, &bufsize);
    if(!buffer) {
        return UPNPCOMMAND_HTTP_ERROR;
    }
    ParseNameValue(buffer, bufsize, &pdata);
    free(buffer);
    buffer = NULL;
    fe = GetValueFromNameValueList(&pdata, "FirewallEnabled");
    ipa = GetValueFromNameValueList(&pdata, "InboundPinholeAllowed");
    if(ipa && fe)
        ret = UPNPCOMMAND_SUCCESS;
    if(fe)
        *firewallEnabled = my_atoui(fe);
    /*else
    	*firewallEnabled = 0;*/
    if(ipa)
        *inboundPinholeAllowed = my_atoui(ipa);
    /*else
    	*inboundPinholeAllowed = 0;*/
    p = GetValueFromNameValueList(&pdata, "errorCode");
    if(p)
    {
        ret = UPNPCOMMAND_UNKNOWN_ERROR;
        sscanf(p, "%d", &ret);
    }
    ClearNameValueList(&pdata);
    return ret;
}

开发者ID:wdmchaft，项目名称:Psybrus，代码行数:45，代码来源:upnpcommands.c

示例13: UPNP_GetLinkLayerMaxBitRates

/* UPNP_GetLinkLayerMaxBitRate() call the corresponding UPNP method.
 * Returns 2 values: Downloadlink bandwidth and Uplink bandwidth.
 * One of the values can be null 
 * Note : GetLinkLayerMaxBitRates belongs to WANPPPConnection:1 only 
 * We can use the GetCommonLinkProperties from WANCommonInterfaceConfig:1 */
void UPNP_GetLinkLayerMaxBitRates(const char * controlURL, const char * servicetype, unsigned int * bitrateDown, unsigned int* bitrateUp)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * down;
	char* up;

	if(!bitrateDown && !bitrateUp)
		return;

	/* shouldn't we use GetCommonLinkProperties ? */
	simpleUPnPcommand(-1, controlURL, servicetype,
	                  "GetCommonLinkProperties", 0, buffer, &bufsize);
	                  /*"GetLinkLayerMaxBitRates", 0, buffer, &bufsize);*/
	/*DisplayNameValueList(buffer, bufsize);*/
	ParseNameValue(buffer, bufsize, &pdata);
	/*down = GetValueFromNameValueList(&pdata, "NewDownstreamMaxBitRate");*/
	/*up = GetValueFromNameValueList(&pdata, "NewUpstreamMaxBitRate");*/
	down = GetValueFromNameValueList(&pdata, "NewLayer1DownstreamMaxBitRate");
	up = GetValueFromNameValueList(&pdata, "NewLayer1UpstreamMaxBitRate");
	/*GetValueFromNameValueList(&pdata, "NewWANAccessType");*/
	/*GetValueFromNameValueList(&pdata, "NewPhysicalLinkSatus");*/

	if(bitrateDown)
	{
		if(down)
			sscanf(down,"%u",bitrateDown);
		else
			*bitrateDown = 0;
	}

	if(bitrateUp)
	{
		if(up)
			sscanf(up,"%u",bitrateUp);
		else
			*bitrateUp = 0;
	}
	ClearNameValueList(&pdata);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:46，代码来源:upnpcommands.c

示例14: UPNP_GetStatusInfo

/* UPNP_GetStatusInfo() call the corresponding UPNP method
 * returns the current status and uptime */
void UPNP_GetStatusInfo(const char * controlURL,
												const char * servicetype,
												char * status, 
												unsigned int * uptime)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	char * p;
	char* up;

	if(!status && !uptime)
		return;

	simpleUPnPcommand(-1, controlURL, servicetype, "GetStatusInfo", 0, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	/*DisplayNameValueList(buffer, bufsize);*/
	up = GetValueFromNameValueList(&pdata, "NewUptime");
	p = GetValueFromNameValueList(&pdata, "NewConnectionStatus");

	if(status)
	{
		if(p){
			strncpy(status, p, 64 );
			status[63] = '\0';
		}else
			status[0]= '\0';
	}

	if(uptime){
		if(p)
			sscanf(up,"%u",uptime);
		else
			uptime = 0;
	}

	ClearNameValueList(&pdata);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:40，代码来源:upnpcommands.c

示例15: UPNP_AddPortMapping

int
UPNP_AddPortMapping(const char * controlURL, const char * servicetype,
                    const char * extPort,
					const char * inPort,
					const char * inClient,
					const char * desc,
					const char * proto)
{
	struct UPNParg * AddPortMappingArgs;
	char buffer[4096];
	int bufsize = 4096;
	struct NameValueParserData pdata;
	const char * resVal;
	int ret;

	if(!inPort || !inClient)
		return 0;

	AddPortMappingArgs = calloc(9, sizeof(struct UPNParg));
	AddPortMappingArgs[0].elt = "NewRemoteHost";
	AddPortMappingArgs[1].elt = "NewExternalPort";
	AddPortMappingArgs[1].val = extPort;
	AddPortMappingArgs[2].elt = "NewProtocol";
	AddPortMappingArgs[2].val = proto;
	AddPortMappingArgs[3].elt = "NewInternalPort";
	AddPortMappingArgs[3].val = inPort;
	AddPortMappingArgs[4].elt = "NewInternalClient";
	AddPortMappingArgs[4].val = inClient;
	AddPortMappingArgs[5].elt = "NewEnabled";
	AddPortMappingArgs[5].val = "1";
	AddPortMappingArgs[6].elt = "NewPortMappingDescription";
	AddPortMappingArgs[6].val = desc?desc:"libminiupnpc";
	AddPortMappingArgs[7].elt = "NewLeaseDuration";
	AddPortMappingArgs[7].val = "0";
	simpleUPnPcommand(-1, controlURL, servicetype, "AddPortMapping", AddPortMappingArgs, buffer, &bufsize);
	/*fd = simpleUPnPcommand(fd, controlURL, data.servicetype, "AddPortMapping", AddPortMappingArgs, buffer, &bufsize);*/
	/*DisplayNameValueList(buffer, bufsize);*/
	/*buffer[bufsize] = '\0';*/
	/*puts(buffer);*/
	ParseNameValue(buffer, bufsize, &pdata);
	resVal = GetValueFromNameValueList(&pdata, "errorCode");
	ret = resVal?0:1;
	/* Do something with resVal if not null ! */
	/*printf("AddPortMapping errorCode = '%s'\n", resVal); */
	ClearNameValueList(&pdata);
	free(AddPortMappingArgs);
	return ret;
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:48，代码来源:upnpcommands.c

示例16: UPNP_GetTotalPacketsReceived

LIBSPEC UNSIGNED_INTEGER
UPNP_GetTotalPacketsReceived(const char * controlURL,
						const char * servicetype)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	unsigned int r = 0;
	char * p;
	simpleUPnPcommand(-1, controlURL, servicetype, "GetTotalPacketsReceived", 0, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	/*DisplayNameValueList(buffer, bufsize);*/
	p = GetValueFromNameValueList(&pdata, "NewTotalPacketsReceived");
	r = my_atoui(p);
	ClearNameValueList(&pdata);
	return r;
}

开发者ID:ProfDrLuigi，项目名称:wired，代码行数:17，代码来源:upnpcommands.c

示例17: UPNP_GetTotalBytesSent

unsigned int
UPNP_GetTotalBytesSent(const char * controlURL,
					const char * servicetype)
{
	struct NameValueParserData pdata;
	char buffer[4096];
	int bufsize = 4096;
	unsigned int r = 0;
	char * p;
	simpleUPnPcommand(-1, controlURL, servicetype, "GetTotalBytesSent", 0, buffer, &bufsize);
	ParseNameValue(buffer, bufsize, &pdata);
	/*DisplayNameValueList(buffer, bufsize);*/
	p = GetValueFromNameValueList(&pdata, "NewTotalBytesSent");
	if(p)
		r = my_atoui(p);
	ClearNameValueList(&pdata);
	return r;
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:18，代码来源:upnpcommands.c

示例18: UPNP_GetPortMappingNumberOfEntries

void UPNP_GetPortMappingNumberOfEntries(const char * controlURL, const char * servicetype, unsigned int * numEntries)
{
 	struct NameValueParserData pdata;
 	char buffer[4096];
 	int bufsize = 4096;
 	char* p;
 	simpleUPnPcommand(-1, controlURL, servicetype, "GetPortMappingNumberOfEntries", 0, buffer, &bufsize);
#ifndef NDEBUG
	DisplayNameValueList(buffer, bufsize);
#endif
 	ParseNameValue(buffer, bufsize, &pdata);
 	p = GetValueFromNameValueList(&pdata, "NewPortMappingNumberOfEntries");
 
 	if(numEntries && p)
 	{
 		sscanf(p,"%u",numEntries);
 	}
 	ClearNameValueList(&pdata);
}

开发者ID:SupportSpace，项目名称:SupportCenter，代码行数:19，代码来源:upnpcommands.c

示例19: test_parsing

int
test_parsing(const char * buf, int len, FILE * f)
{
	char line[1024];
	struct NameValueParserData pdata;
	int ok = 1;
	ParseNameValue(buf, len, &pdata);
	/* check result */
	if(f != NULL)
	{
		while(fgets(line, sizeof(line), f))
		{
			char * value;
			char * equal;
			char * parsedvalue;
			int l;
			l = strlen(line);
			while((l > 0) && ((line[l-1] == '\r') || (line[l-1] == '\n')))
				line[--l] = '\0';
			/* skip empty lines */
			if(l == 0)
				continue;
			equal = strchr(line, '=');
			if(equal == NULL)
			{
				fprintf(stderr, "Warning, line does not contain '=' : %s\n", line);
				continue;
			}
			*equal = '\0';
			value = equal + 1;
			parsedvalue = GetValueFromNameValueList(&pdata, line);
			if((parsedvalue == NULL) || (strcmp(parsedvalue, value) != 0))
			{
				fprintf(stderr, "Element <%s> : expecting value '%s', got '%s'\n",
				        line, value, parsedvalue ? parsedvalue : "<null string>");
				ok = 0;
			}
		}
	}
	ClearNameValueList(&pdata);
	return ok;
}

开发者ID:1manStartup，项目名称:BitShares，代码行数:42，代码来源:testupnpreplyparse.c

示例20: upnpc_soap_response

static void upnpc_soap_response(struct evhttp_request * req, void * pvoid)
{
	size_t len;
	unsigned char * data;
	struct evbuffer * input_buffer;
	upnpc_device_t * d = (upnpc_device_t *)pvoid;
	int code;

	if(req == NULL) {
		debug_printf("%s(%p, %p) NULL argument !\n", __func__, req, pvoid);
		return;
	}
	code = evhttp_request_get_response_code(req);
	input_buffer = evhttp_request_get_input_buffer(req);
	len = evbuffer_get_length(input_buffer);
	data = evbuffer_pullup(input_buffer, len);
	debug_printf("%s %d (%d bytes)\n", __func__, code, (int)len);
	debug_printf("%.*s\n", (int)len, (char *)data);
	if(data == NULL)
		return;

	ClearNameValueList(&d->soap_response_data);
	ParseNameValue((char *)data, (int)len, 
	               &d->soap_response_data);
	d->state &= ~UPNPC_DEVICE_SOAP_REQ;
	if(d->state & UPNPC_DEVICE_READY) {
		d->parent->soap_cb(code, d->parent, d, d->parent->cb_data);
	} else if(d->state & UPNPC_DEVICE_GETSTATUS) {
		const char * connection_status;
		d->state &= ~UPNPC_DEVICE_GETSTATUS;
		connection_status = GetValueFromNameValueList(&d->soap_response_data, "NewConnectionStatus");
		d->state |= UPNPC_DEVICE_READY;
		if((code == 200) && connection_status && (0 == strcmp("Connected", connection_status))) {
			d->parent->ready_cb(code, d->parent, d, d->parent->cb_data);
			d->state |= UPNPC_DEVICE_CONNECTED;
			event_del(d->parent->ev_ssdp_recv);
		} else {
			d->parent->ready_cb(UPNPC_ERR_NOT_CONNECTED, d->parent, d, d->parent->cb_data);
		}
	}
}

开发者ID:khanmgn，项目名称:miniupnp，代码行数:41，代码来源:miniupnpc-libevent.c

注：本文中的GetValueFromNameValueList函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetValueHelper函数代码示例发布时间：2022-05-30

C++ GetValue函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19208|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9994|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8330|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8699|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8642|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9662|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8627|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8003|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8659|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ GetValueFromNameValueList函数代码示例

示例1: UPNP_GetConnectionTypeInfo

示例2: UPNP_GetExternalIPAddress

示例3: UPNP_GetPortMappingNumberOfEntries

示例4: UPNP_GetStatusInfo

示例5: UPNP_GetLinkLayerMaxBitRates

示例6: UPNP_GetSpecificPortMappingEntry

示例7: UPNP_GetSpecificPortMappingEntry

示例8: UPNP_GetExternalIPAddress

示例9: UPNP_GetConnectionTypeInfo

示例10: UPNP_AddPortMapping

示例11: soap

示例12: UPNP_GetFirewallStatus

示例13: UPNP_GetLinkLayerMaxBitRates

示例14: UPNP_GetStatusInfo

示例15: UPNP_AddPortMapping

示例16: UPNP_GetTotalPacketsReceived

示例17: UPNP_GetTotalBytesSent

示例18: UPNP_GetPortMappingNumberOfEntries

示例19: test_parsing

示例20: upnpc_soap_response

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2115

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053