C++ GetServiceType函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetServiceType函数的典型用法代码示例。如果您正苦于以下问题：C++ GetServiceType函数的具体用法？C++ GetServiceType怎么用？C++ GetServiceType使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetServiceType函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: WTRACE

// SMsgDirG2ClearDataObjects::Unpack
// Virtual method from SmallMessage.  Extracts data from message buffer.
void
SMsgDirG2ClearDataObjects::Unpack(void)
{
	WTRACE("SMsgDirG2ClearDataObjects::Unpack");
	mClearTypes.clear();
	mKeyType = (GetMessageType() == WONMsg::DirG2ServiceClearDataObjects ? KT_SERVICE : KT_DIRECTORY);
	SMsgDirG2UpdateBase::Unpack();

	if ((GetServiceType() != WONMsg::SmallDirServerG2) ||
	    ((GetMessageType() != WONMsg::DirG2DirectoryClearDataObjects) &&
	     (GetMessageType() != WONMsg::DirG2ServiceClearDataObjects)))
	{
		WDBG_AH("SMsgDirG2ClearDataObjects::Unpack Not a DirG2ClearDataObjects message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirG2ClearDataObjects message.");
	}

	UnpackKey(*this);
	unsigned short aCt = ReadShort();
	WDBG_LL("SMsgDirG2ClearDataObjects::Unpack Reading " << aCt << " entries.");

	for (int i=0; i < aCt; i++)
	{
		DataObject anObj;
		unsigned char aLen = ReadByte();
		if (aLen > 0)
			anObj.GetDataType().assign(reinterpret_cast<const unsigned char*>(ReadBytes(aLen)), aLen);
		mClearTypes.insert(anObj);
	}

	UnpackPeerData();
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:34，代码来源:SMsgDirG2ClearDataObjects.cpp

示例2: WTRACE

void MMsgRoutingUnsubscribeDataObject::Unpack(void)
{
	WTRACE("MMsgRoutingUnsubscribeDataObject::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingUnsubscribeDataObject)
	{
		WDBG_AH("MMsgRoutingUnsubscribeDataObject::Unpack Not a RoutingUnsubscribeDataObject message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingUnsubscribeDataObject message.");
	}

	// read in the client/group id
	mLinkId = ReadClientOrGroupId();
	
	// read in the datatype length followed by the datatype itself
	unsigned char aDataTypeSize = ReadByte();
	mDataType.assign((unsigned char*)ReadBytes(aDataTypeSize), aDataTypeSize);
	
	// read in the flags
	unsigned char aFlags = ReadByte();
	mExactOrRecursiveFlag = ((aFlags & 0x01) != 0);
	mGroupOrMembersFlag   = ((aFlags & 0x02) != 0);
	
	WDBG_LL("MMsgRoutingUnsubscribeDataObject::Unpack Reading message data");
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:26，代码来源:MMsgRoutingUnsubDataObject.cpp

示例3: ParseBody

//[输入]buffer:待解析的数据，opt_num:选项数量
//[输出]无
void ParseBody(char *buffer, int opt_num) {
//	int m;
//	printf("body...\n");
//	for(m=0;m++;m<=32)
//	{
//		printf("%s",buffer[m]);
//	}
//	printf(".............\n");
	//首先判断服务类型
	char *service = NULL;
	service = GetServiceType(buffer);

	if (service != NULL) {
	//	cout<<"应用层数据解析OK!"<<endl;
	//	cout<<"服务类型 :"<<service<<endl;

		if (strcmp(service, "SERVICE_HTTP") == 0) {
		         //	HttpParse(buffer, opt_num);
		}
		else if (strcmp(service, "SERVICE_SMTP") == 0) {
					cout<<"应用层数据解析OK!"<<endl;
					cout<<"服务类型 :"<<service<<endl;
			       SmtpParse(buffer, opt_num);
			       cout<<"-----------------------解析完成 !"<<endl;
		}
		else  //其它应用层数据类型
		{
		//	cout << "-----其它类型应用层数据------" << endl;
		}

	//	cout<<"-----------------------解析完成 !"<<endl;
	}

	free(service);
}

开发者ID:funnybjzs，项目名称:PictureSteganalysisOnline，代码行数:37，代码来源:Parse.cpp

示例4: WTRACE

// TMsgCommQueryOptions::unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
TMsgCommQueryOptions::Unpack(void)
{
	WTRACE("TMsgCommQueryOptions::Unpack");
	mOptionList.clear();
	TMessage::Unpack();

	if ((GetServiceType() != WONMsg::CommonService) ||
	    (GetMessageType() != WONMsg::CommQueryOptions))
	{
		WDBG_AH("TMsgCommRehupOptions::Unpack Not a CommQueryOptions message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a CommQueryOptions message.");
	}

	// Get num options
	unsigned short aCt = ReadShort();

	WDBG_LL("TMsgCommQueryOptions::Unpack Reading " << aCt << "entries.");
	for (int i=0; i < aCt; i++)
	{
		string aBuf;
		ReadString(aBuf);
		mOptionList.push_back(aBuf);
	}
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:28，代码来源:TMsgCommQueryOptions.cpp

示例5: WTRACE

// TMsgDirGetDirContents::Unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
TMsgDirGetDirContentsReply::Unpack(void)
{
	WTRACE("TMsgDirGetDirContentsReply::Unpack");
	TMessage::Unpack();

	if ((GetServiceType() != WONMsg::DirServer) ||
	    (GetMessageType() != WONMsg::DirGetDirContentsReply))
	{
		WDBG_AH("TMsgDirGetDirContentsReply::Unpack Not a DirGetDirContentsReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirGetDirContentsReply message.");
	}

	WDBG_LL("TMsgDirGetDirContentsReply::Unpack Reading message data");
	mStatus = static_cast<ServerStatus>(static_cast<short>(ReadShort()));
	unsigned short anEntryCt = ReadShort();

	WDBG_LL("TMsgDirGetDirContentsReply::Unpack Reading " << anEntryCt << "entries.");
	mEntries.clear();
	for (int i=0; i < anEntryCt; i++)
	{
		DirServerEntry anEntry;
		UnpackEntry(anEntry);
		mEntries.push_back(anEntry);
	}
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:29，代码来源:TMsgDirGetDirContents.cpp

示例6: WTRACE

void MMsgRoutingModifyDataObject::Unpack(void)
{
	WTRACE("MMsgRoutingModifyDataObject::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingModifyDataObject)
	{
		WDBG_AH("MMsgRoutingModifyDataObject::Unpack Not a RoutingModifyDataObject message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingModifyDataObject message.");
	}

	// read in the client/group id
	mLinkId = ReadClientOrGroupId();
	
	// read in the datatype size and then the datatype itself
	unsigned char aDataTypeSize = ReadByte();
	mDataType.assign((unsigned char*)ReadBytes(aDataTypeSize), aDataTypeSize);

	// read in the offset
	mOffset = ReadShort();

	// read in the IsInsert flag
	mIsInsert = ReadBool();
	
	// read in the data length followed by the data itself
	unsigned short aDataSize = ReadShort();
	mData.assign((unsigned char*)ReadBytes(aDataSize), aDataSize);

	WDBG_LL("MMsgRoutingModifyDataObject::Unpack Reading message data");
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:31，代码来源:MMsgRoutingModifyDataObject.cpp

示例7: WTRACE

// TMsgDirFindServiceReply::Unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
TMsgDirFindServiceReply::Unpack(void)
{
	WTRACE("TMsgDirFindServiceReply::Unpack");
	TMessage::Unpack();

	if ((GetServiceType() != WONMsg::DirServer) ||
	    (GetMessageType() != WONMsg::DirFindServiceReply))
	{
		WDBG_AH("TMsgDirFindServiceReply::Unpack Not a DirFindServiceReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirFindServiceReply message.");
	}

	WDBG_LL("TMsgDirFindServiceReply::Unpack Reading message data");
	mStatus = static_cast<ServerStatus>(static_cast<short>(ReadShort()));

	// Service data only present if status is success
	if (mStatus == WONMsg::StatusCommon_Success)
	{
		mService.mType = DirServerEntry::EntryTypeService;
		ReadWString(mService.mPath);
		ReadWString(mService.mName);
		ReadWString(mService.mDisplayName);
		ReadWString(mService.mVersion);
		ReadWString(mService.mProtoName);
		ReadWString(mService.mProtoVersion);
		ReadWString(mService.mNetAddress);
		mService.mLifespan = ReadLong();
		mService.mCreated  = ReadLong();

		unsigned short aLen = ReadShort();
		mService.SetBlob(ReadBytes(aLen), aLen);
	}
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:37，代码来源:TMsgDirFindService.cpp

示例8: WTRACE

void MMsgRoutingGetUserListReply::Unpack(void)
{
	WTRACE("MMsgRoutingGetUserListReply::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingGetUserListReply)
	{
		WDBG_AH("MMsgRoutingGetUserListReply::Unpack Not a RoutingGetUserListReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingGetUserListReply message.");
	}

	WDBG_LL("MMsgRoutingGetUserListReply::Unpack Reading message data");

	// read in the status
	mStatus = ReadShort();

	// read in the user count
	unsigned short aNumUsers = ReadShort();

	// read in the user list
	mUserList.clear();
	for (int iUser = 0; iUser < aNumUsers; iUser++)
	{
		UserData aUser;
		ReadUserName(aUser.mUserName);

		mUserList.push_back(aUser);
	}
}

开发者ID:vgck，项目名称:opendr2，代码行数:30，代码来源:MMsgRoutingGetUserList.cpp

示例9: WTRACE

void MMsgRoutingSendData::Unpack(void)
{
	WTRACE("MMsgRoutingSendData::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingSendData)
	{
		WDBG_AH("MMsgRoutingSendData::Unpack Not a RoutingSendData message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingSendData message.");
	}

	WDBG_LL("MMsgRoutingSendData::Unpack Reading message data");

	// read in the flags
	unsigned char aFlags = ReadByte();
	mShouldSendReply     = ((aFlags & 0x01) != 0);
	mIncludeExcludeFlag  = ((aFlags & 0x02) != 0);

	// read in the message data
	unsigned short aDataSize = ReadShort();
	mData.assign(reinterpret_cast<const unsigned char*>(ReadBytes(aDataSize)), aDataSize);

	// read in the address list
	ReadAddresseeList(this);
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:26，代码来源:MMsgRoutingSendData.cpp

示例10: WTRACE

// MMsgObsSubscribeById::Unpack
// Virtual method from MiniMessage.  Extracts data from message buffer.
void
MMsgObsSubscribeById::Unpack(void)
{
	WTRACE("MMsgObsSubscribeById::Unpack");
	MiniMessage::Unpack();

	if ((GetServiceType() != WONMsg::MiniObsServer) ||
	    (GetMessageType() != WONMsg::ObsMsg_SubscribeById))
	{
		WDBG_AH("MMsgObsSubscribeById::Unpack Not a ObsSubscribeById message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a ObsSubscribeById message.");
	}

	WDBG_LL("MMsgObsSubscribeById::Unpack Reading message data");

	mPublicationId = ReadLong();
	mSubscriberId = ReadLong();
	if (!mSubscriberId) // Optional parameters follow
	{
		ReadString(mSubscriberName);
		ReadWString(mSubscriberDescription);
		mConnectionType = (ConnectionTypeEnum)ReadShort();
		ReadString(mSubscriberAddress);
	}
}

开发者ID:vgck，项目名称:opendr2，代码行数:28，代码来源:MMsgObsSubscribeById.cpp

示例11: WTRACE

// SMsgDirG2ModifyService::Unpack
// Virtual method from SmallMessage.  Extracts data from message buffer.
void
SMsgDirG2ModifyService::Unpack(void)
{
	WTRACE("SMsgDirG2ModifyService::Unpack");
	SetKeyType(KT_SERVICE);
	SetExtended((GetMessageType() != WONMsg::DirG2ModifyService), (GetMessageType() == WONMsg::DirG2ModifyServiceEx));
	SMsgDirG2UpdateExtendBase::Unpack();

	if ((GetServiceType() != WONMsg::SmallDirServerG2) ||
	    ((GetMessageType() != WONMsg::DirG2ModifyService) &&
	     (GetMessageType() != WONMsg::DirG2ModifyServiceEx) &&
		 (GetMessageType() != WONMsg::DirG2ModifyServiceExObsolete)))
	{
		WDBG_AH("SMsgDirG2ModifyService::Unpack Not a DirG2ModifyService(Ex) message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirG2ModifyService(Ex) message.");
	}

	mEntityFlags = ReadByte();
	UnpackKey(*this);
	ReadWString(mNewName);

	unsigned char aLen = ReadByte();
	WDBG_LL("SMsgDirG2ModifyService::Unpack Read New Addr len=" << aLen);
	if (aLen > 0)
		mNewNetAddress.assign(reinterpret_cast<const unsigned char*>(ReadBytes(aLen)), aLen);

	ReadWString(mNewDisplayName);
	mNewLifespan = ReadLong();
	UnpackExtended();
	UnpackPeerData();
}

开发者ID:vgck，项目名称:opendr2，代码行数:34，代码来源:SMsgDirG2ModifyService.cpp

示例12: WTRACE

void MMsgRoutingCreateGroup::Unpack(void)
{
	WTRACE("MMsgRoutingCreateGroup::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingCreateGroup)
	{
		WDBG_AH("MMsgRoutingCreateGroup::Unpack Not a RoutingCreateGroup message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingCreateGroup message.");
	}

	WDBG_LL("MMsgRoutingCreateGroup::Unpack Reading message data");

	// read in group name
	ReadGroupName(mGroupName);
	
	// read in flags
	unsigned char aFlags = ReadByte();
	mIsPublic             = ((aFlags & 0x01) != 0);
	mAnnounceGroupChanges = ((aFlags & 0x02) != 0);

	// read in client count
	unsigned short aNumClients = ReadShort();

	// read in client list
	mClientList.clear();
	for (int iClient = 0; iClient < aNumClients; iClient++)
		mClientList.push_back(ReadClientId());
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:30，代码来源:MMsgRoutingCreateGroup.cpp

示例13: WTRACE

// SMsgDirG2GetNumEntitiesReply::Unpack
// Virtual method from SmallMessage.  Extracts data from message buffer.
void
SMsgDirG2GetNumEntitiesReply::Unpack(void)
{
	WTRACE("SMsgDirG2GetNumEntitiesReply::Unpack");
	SmallMessage::Unpack();

	if ((GetServiceType() != WONMsg::SmallDirServerG2) ||
	    (GetMessageType() != WONMsg::DirG2GetNumEntitiesReply))
	{
		WDBG_AH("SMsgDirG2GetNumEntitiesReply::Unpack Not a DirG2GetNumEntitiesReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirG2GetNumEntitiesReply message.");
	}

	WDBG_LL("SMsgDirG2GetNumEntitiesReply::Unpack Reading message data");
	unsigned short anEntryCt = ReadShort();

	WDBG_LL("SMsgDirG2GetNumEntitiesReply::Unpack Reading " << anEntryCt << " entries.");
	mEntries.clear();
	for (int i=0; i < anEntryCt; i++)
	{
		NumEntriesData anEntry;
		mEntries.push_back(anEntry);
		mEntries.back().first  = static_cast<short>(ReadShort());
		mEntries.back().second = ReadShort();
	}
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:29，代码来源:SMsgDirG2GetNumEntities.cpp

示例14: WTRACE

void SMsgCommDumpStatistics::Unpack(void)
{
	WTRACE("SMsgCommDumpStatistics::Unpack");
	SmallMessage::Unpack();

	if (GetServiceType() != WONMsg::SmallCommonService ||
	    GetMessageType() != WONMsg::SmallCommDumpStatistics)
	{
		WDBG_AH("SMsgCommDumpStatistics::Unpack Not a SMsgCommDumpStatistics message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a SMsgCommDumpStatistics message.");
	}
}

开发者ID:vgck，项目名称:opendr2，代码行数:12，代码来源:SMsgCommDumpStatistics.cpp

示例15: WTRACE

void MMsgRoutingBecomeModerator::Unpack(void)
{
	WTRACE("MMsgRoutingBecomeModerator::Unpack");
	RoutingServerClientIdFlagMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingBecomeModerator)
	{
		WDBG_AH("MMsgRoutingBecomeModerator::Unpack Not a RoutingBecomeModerator message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingBecomeModerator message.");
	}
}

开发者ID:vgck，项目名称:opendr2，代码行数:12，代码来源:MMsgRoutingBecomeModerator.cpp

示例16: OpenSCManager

//--------------------------------------------------------------------------------
BOOL CNTService::InstallService()
	{
	AFX_MANAGE_STATE_IF_DLL

	TCHAR szPath[1024];

	if(GetModuleFileName( 0, szPath, 1023 ) == 0 )
		return FALSE;

	BOOL bRet = FALSE;

	SC_HANDLE schSCManager = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS);

	if(schSCManager != NULL)
		{
		DWORD nServiceType = GetServiceType();
		DWORD nStartType = GetStartType();

		SC_HANDLE schService =	CreateService(
									schSCManager,
									GetServiceName(),
									GetDisplayName(),
									GetDesiredAccess(),
									nServiceType,
									nStartType,
									GetErrorControl(),
									szPath,
									GetLoadOrderGroup(),
									((nServiceType == SERVICE_KERNEL_DRIVER ||
									  nServiceType == SERVICE_FILE_SYSTEM_DRIVER) &&
									 (nStartType == SERVICE_BOOT_START ||
									  nStartType == SERVICE_SYSTEM_START)) ?
										&m_dwTagID : NULL,
									GetDependencies(),
									GetUserName(),
									GetPassword()
								);

		if(schService != NULL)
			{
			CloseServiceHandle(schService);
			bRet = TRUE;
			}

		CloseServiceHandle(schSCManager);
		}

	if(bRet)
		// installation succeeded. Now register the message file
		RegisterApplicationLog(szPath, EVENTLOG_ERROR_TYPE | EVENTLOG_WARNING_TYPE | EVENTLOG_INFORMATION_TYPE);

	return bRet;
	}

开发者ID:richschonthal，项目名称:HL7，代码行数:54，代码来源:NTService.cpp

示例17: WTRACE

void MMsgRoutingInviteClient::Unpack(void)
{
	WTRACE("MMsgRoutingInviteClient::Unpack");
	RoutingServerClientNameFlagMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingInviteClient)
	{
		WDBG_AH("MMsgRoutingInviteClient::Unpack Not a RoutingInviteClient message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingInviteClient message.");
	}
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:12，代码来源:MMsgRoutingInviteClient.cpp

示例18: WTRACE

// MMsgCommNoOp::unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
MMsgCommNoOp::Unpack(void)
{
	WTRACE("MMsgCommNoOp::Unpack");
	MiniMessage::Unpack();

	if ((GetServiceType() != WONMsg::MiniCommonService) ||
	    (GetMessageType() != WONMsg::MiniCommNoOp))
	{
		WDBG_AH("MMsgCommNoOp::Unpack Not a CommNoOp message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a CommNoOp message.");
	}
}

开发者ID:vgck，项目名称:opendr2，代码行数:16，代码来源:MMsgCommNoOp.cpp

示例19: WTRACE

void MMsgRoutingKeepAlive::Unpack(void)
{
	WTRACE("MMsgRoutingKeepAlive::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingKeepAlive)
	{
		WDBG_AH("MMsgRoutingKeepAlive::Unpack Not a RoutingKeepAlive message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingKeepAlive message.");
	}

	WDBG_LL("MMsgRoutingKeepAlive::Unpack Reading message data");
}

开发者ID:vgck，项目名称:opendr2，代码行数:14，代码来源:MMsgRoutingKeepAlive.cpp

示例20: WTRACE

// TMsgDirLoadFromSource::Unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
TMsgDirLoadFromSource::Unpack(void)
{
	WTRACE("TMsgDirLoadFromSource::Unpack");
	TMessage::Unpack();

	if ((GetServiceType() != WONMsg::DirServer) ||
	    (GetMessageType() != WONMsg::DirLoadFromSource))
	{
		WDBG_AH("TMsgDirLoadFromSource::Unpack Not a DirLoadFromSource message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirLoadFromSource message.");
	}
}

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:16，代码来源:TMsgDirLoadFromSource.cpp

注：本文中的GetServiceType函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetSession函数代码示例发布时间：2022-05-30

C++ GetServerDE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19201|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9990|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8329|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8698|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8641|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9660|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8626|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8001|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8658|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ GetServiceType函数代码示例

示例1: WTRACE

示例2: WTRACE

示例3: ParseBody

示例4: WTRACE

示例5: WTRACE

示例6: WTRACE

示例7: WTRACE

示例8: WTRACE

示例9: WTRACE

示例10: WTRACE

示例11: WTRACE

示例12: WTRACE

示例13: WTRACE

示例14: WTRACE

示例15: WTRACE

示例16: OpenSCManager

示例17: WTRACE

示例18: WTRACE

示例19: WTRACE

示例20: WTRACE

请发表评论

全部评论

上一篇：

下一篇：

Karumi/SpringBootKotlin: Spring boot Kot

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053