• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ GetMessageType函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GetMessageType函数的典型用法代码示例。如果您正苦于以下问题：C++ GetMessageType函数的具体用法？C++ GetMessageType怎么用？C++ GetMessageType使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GetMessageType函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: WTRACE

// SMsgDirG2ModifyService::Unpack
// Virtual method from SmallMessage.  Extracts data from message buffer.
void
SMsgDirG2ModifyService::Unpack(void)
{
	WTRACE("SMsgDirG2ModifyService::Unpack");
	SetKeyType(KT_SERVICE);
	SetExtended((GetMessageType() != WONMsg::DirG2ModifyService), (GetMessageType() == WONMsg::DirG2ModifyServiceEx));
	SMsgDirG2UpdateExtendBase::Unpack();

	if ((GetServiceType() != WONMsg::SmallDirServerG2) ||
	    ((GetMessageType() != WONMsg::DirG2ModifyService) &&
	     (GetMessageType() != WONMsg::DirG2ModifyServiceEx) &&
		 (GetMessageType() != WONMsg::DirG2ModifyServiceExObsolete)))
	{
		WDBG_AH("SMsgDirG2ModifyService::Unpack Not a DirG2ModifyService(Ex) message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirG2ModifyService(Ex) message.");
	}

	mEntityFlags = ReadByte();
	UnpackKey(*this);
	ReadWString(mNewName);

	unsigned char aLen = ReadByte();
	WDBG_LL("SMsgDirG2ModifyService::Unpack Read New Addr len=" << aLen);
	if (aLen > 0)
		mNewNetAddress.assign(reinterpret_cast<const unsigned char*>(ReadBytes(aLen)), aLen);

	ReadWString(mNewDisplayName);
	mNewLifespan = ReadLong();
	UnpackExtended();
	UnpackPeerData();
}
开发者ID:vgck，项目名称:opendr2，代码行数:34，代码来源:SMsgDirG2ModifyService.cpp


示例2: WTRACE

// SMsgDirG2ClearDataObjects::Unpack
// Virtual method from SmallMessage.  Extracts data from message buffer.
void
SMsgDirG2ClearDataObjects::Unpack(void)
{
	WTRACE("SMsgDirG2ClearDataObjects::Unpack");
	mClearTypes.clear();
	mKeyType = (GetMessageType() == WONMsg::DirG2ServiceClearDataObjects ? KT_SERVICE : KT_DIRECTORY);
	SMsgDirG2UpdateBase::Unpack();

	if ((GetServiceType() != WONMsg::SmallDirServerG2) ||
	    ((GetMessageType() != WONMsg::DirG2DirectoryClearDataObjects) &&
	     (GetMessageType() != WONMsg::DirG2ServiceClearDataObjects)))
	{
		WDBG_AH("SMsgDirG2ClearDataObjects::Unpack Not a DirG2ClearDataObjects message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirG2ClearDataObjects message.");
	}

	UnpackKey(*this);
	unsigned short aCt = ReadShort();
	WDBG_LL("SMsgDirG2ClearDataObjects::Unpack Reading " << aCt << " entries.");

	for (int i=0; i < aCt; i++)
	{
		DataObject anObj;
		unsigned char aLen = ReadByte();
		if (aLen > 0)
			anObj.GetDataType().assign(reinterpret_cast<const unsigned char*>(ReadBytes(aLen)), aLen);
		mClearTypes.insert(anObj);
	}

	UnpackPeerData();
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:34，代码来源:SMsgDirG2ClearDataObjects.cpp


示例3: xf_process_cliprdr_event

void xf_process_cliprdr_event(xfInfo* xfi, wMessage* event)
{
	switch (GetMessageType(event->id))
	{
		case CliprdrChannel_MonitorReady:
			xf_cliprdr_process_cb_monitor_ready_event(xfi);
			break;

		case CliprdrChannel_FormatList:
			xf_cliprdr_process_cb_format_list_event(xfi, (RDP_CB_FORMAT_LIST_EVENT*) event);
			break;

		case CliprdrChannel_DataRequest:
			xf_cliprdr_process_cb_data_request_event(xfi, (RDP_CB_DATA_REQUEST_EVENT*) event);
			break;

		case CliprdrChannel_DataResponse:
			xf_cliprdr_process_cb_data_response_event(xfi, (RDP_CB_DATA_RESPONSE_EVENT*) event);
			break;

		default:
			DEBUG_X11_CLIPRDR("unknown event type %d", GetMessageType(event->id));
			break;
	}
}
开发者ID:Nigel62，项目名称:FreeRDP，代码行数:25，代码来源:xf_cliprdr.c


示例4: cliprdr_process_event

static void cliprdr_process_event(rdpSvcPlugin* plugin, wMessage* event)
{
	switch (GetMessageType(event->id))
	{
		case CliprdrChannel_FormatList:
			cliprdr_process_format_list_event((cliprdrPlugin*) plugin, (RDP_CB_FORMAT_LIST_EVENT*) event);
			break;
		case CliprdrChannel_DataRequest:
			cliprdr_process_format_data_request_event((cliprdrPlugin*) plugin, (RDP_CB_DATA_REQUEST_EVENT*) event);
			break;
		case CliprdrChannel_DataResponse:
			cliprdr_process_format_data_response_event((cliprdrPlugin*) plugin, (RDP_CB_DATA_RESPONSE_EVENT*) event);
			break;
		case CliprdrChannel_FilecontentsRequest:
			cliprdr_process_filecontents_request_event((cliprdrPlugin*) plugin, (RDP_CB_FILECONTENTS_REQUEST_EVENT*) event);
			break;
		case CliprdrChannel_FilecontentsResponse:
			cliprdr_process_filecontents_response_event((cliprdrPlugin*) plugin, (RDP_CB_FILECONTENTS_RESPONSE_EVENT*) event);
			break;
		case CliprdrChannel_LockClipdata:
			cliprdr_process_lock_clipdata_event((cliprdrPlugin*) plugin, (RDP_CB_LOCK_CLIPDATA_EVENT*) event);
			break;
		case CliprdrChannel_UnLockClipdata:
			cliprdr_process_unlock_clipdata_event((cliprdrPlugin*) plugin, (RDP_CB_UNLOCK_CLIPDATA_EVENT*) event);
			break;
		case CliprdrChannel_TemporaryDirectory:
			cliprdr_process_tempdir_event((cliprdrPlugin*) plugin, (RDP_CB_TEMPDIR_EVENT*) event);
			break;
		default:
			WLog_ERR(TAG, "unknown event type %d", GetMessageType(event->id));
			break;
	}

	freerdp_event_free(event);
}
开发者ID:Huangyan9188，项目名称:FreeRDP，代码行数:35，代码来源:cliprdr_main.c


示例5: android_process_cliprdr_event

void android_process_cliprdr_event(freerdp* inst, wMessage* event)
{
	androidContext* ctx = (androidContext*)inst->context;
	clipboardContext* cb = (clipboardContext*) ctx->clipboard_context;
	
	if (!cb)
	{
		return;
	}
	
	switch (GetMessageType(event->id))
	{
		case CliprdrChannel_MonitorReady:
			android_cliprdr_process_cb_monitor_ready_event(cb);
			break;

		case CliprdrChannel_FormatList:
			android_cliprdr_process_cb_format_list_event(cb, (RDP_CB_FORMAT_LIST_EVENT*) event);
			break;

		case CliprdrChannel_DataRequest:
			android_cliprdr_process_cb_data_request_event(cb, (RDP_CB_DATA_REQUEST_EVENT*) event);
			break;

		case CliprdrChannel_DataResponse:
			android_cliprdr_process_cb_data_response_event(cb, (RDP_CB_DATA_RESPONSE_EVENT*) event);
			break;

		default:
			DEBUG_ANDROID("unknown event type %d", GetMessageType(event->id));
			break;
	}
}
开发者ID:10084462，项目名称:FreeRDP，代码行数:33，代码来源:android_cliprdr.c


示例6: Post

		void InfoReporter::Post()
		{
			MojingPlatformBase* pPlatform = MojingPlatformBase::GetPlatform();
			if (pPlatform == NULL)
				return;
			String data = "ltype=";
#ifdef MJ_OS_ANDROID
			if (GetMessageType() == MSGTYPE_ACTIVE)
				data += "mjsdk_active_android";
			else
				data += "mjsdk_error_android";
#else
			if (GetMessageType() == MSGTYPE_ACTIVE)
				data += "mjsdk_active_ios";
			else
				data += "mjsdk_error_ios";
#endif
			char buf[32];
			data += "&pid=";
#ifdef REPORTER_URL_ENCRYPT 
			data += BaofengEnc(pPlatform->GetAppID());
			data += "&uid=";
			data += BaofengEnc(pPlatform->GetUserID());
			data += "&rid=";
			data += BaofengEnc(pPlatform->GetRunID());
			data += "&ver=";
			data += BaofengEnc(pPlatform->GetAppName());
			data += "&sid=";
			data += BaofengEnc(pPlatform->GetChannelID());
			data += "&type=";
			sprintf(buf, "%d", GetReportType());
			data += BaofengEnc(buf);
			data += "&msg=";
			data += BaofengEnc(GetReportMsg());
			data += "&enc=1";
#else
			data += pPlatform->GetAppID(); 
			data += "&uid=";
			data += pPlatform->GetUserID();
			data += "&rid=";
			data += pPlatform->GetRunID();
			data += "&ver=";
			data += ConvertToUrlEncode(pPlatform->GetAppName());
			data += "&sid=";
			data += ConvertToUrlEncode(pPlatform->GetChannelID());
			data += "&type=";
			sprintf(buf, "%d", GetReportType());
			data += buf;
			data += "&msg=";
			data += ConvertToUrlEncode(GetReportMsg());
#endif

			// post by thread 
			ProfileThreadMGR::UpdateInternetProfile(GetClassName(), data, Profile_SAVE, InternetInfoPostCallBack, this);
		}
开发者ID:playbar，项目名称:testplayer，代码行数:55，代码来源:InfoReporter.cpp


示例7: WTRACE

void MMsgRoutingModifyDataObject::Unpack(void)
{
	WTRACE("MMsgRoutingModifyDataObject::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingModifyDataObject)
	{
		WDBG_AH("MMsgRoutingModifyDataObject::Unpack Not a RoutingModifyDataObject message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingModifyDataObject message.");
	}

	// read in the client/group id
	mLinkId = ReadClientOrGroupId();
	
	// read in the datatype size and then the datatype itself
	unsigned char aDataTypeSize = ReadByte();
	mDataType.assign((unsigned char*)ReadBytes(aDataTypeSize), aDataTypeSize);

	// read in the offset
	mOffset = ReadShort();

	// read in the IsInsert flag
	mIsInsert = ReadBool();
	
	// read in the data length followed by the data itself
	unsigned short aDataSize = ReadShort();
	mData.assign((unsigned char*)ReadBytes(aDataSize), aDataSize);

	WDBG_LL("MMsgRoutingModifyDataObject::Unpack Reading message data");
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:31，代码来源:MMsgRoutingModifyDataObject.cpp


示例8: WTRACE

void MMsgRoutingSendData::Unpack(void)
{
	WTRACE("MMsgRoutingSendData::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingSendData)
	{
		WDBG_AH("MMsgRoutingSendData::Unpack Not a RoutingSendData message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingSendData message.");
	}

	WDBG_LL("MMsgRoutingSendData::Unpack Reading message data");

	// read in the flags
	unsigned char aFlags = ReadByte();
	mShouldSendReply     = ((aFlags & 0x01) != 0);
	mIncludeExcludeFlag  = ((aFlags & 0x02) != 0);

	// read in the message data
	unsigned short aDataSize = ReadShort();
	mData.assign(reinterpret_cast<const unsigned char*>(ReadBytes(aDataSize)), aDataSize);

	// read in the address list
	ReadAddresseeList(this);
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:26，代码来源:MMsgRoutingSendData.cpp


示例9: WTRACE

// MMsgObsSubscribeById::Unpack
// Virtual method from MiniMessage.  Extracts data from message buffer.
void
MMsgObsSubscribeById::Unpack(void)
{
	WTRACE("MMsgObsSubscribeById::Unpack");
	MiniMessage::Unpack();

	if ((GetServiceType() != WONMsg::MiniObsServer) ||
	    (GetMessageType() != WONMsg::ObsMsg_SubscribeById))
	{
		WDBG_AH("MMsgObsSubscribeById::Unpack Not a ObsSubscribeById message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a ObsSubscribeById message.");
	}

	WDBG_LL("MMsgObsSubscribeById::Unpack Reading message data");

	mPublicationId = ReadLong();
	mSubscriberId = ReadLong();
	if (!mSubscriberId) // Optional parameters follow
	{
		ReadString(mSubscriberName);
		ReadWString(mSubscriberDescription);
		mConnectionType = (ConnectionTypeEnum)ReadShort();
		ReadString(mSubscriberAddress);
	}
}
开发者ID:vgck，项目名称:opendr2，代码行数:28，代码来源:MMsgObsSubscribeById.cpp


示例10: sizeof

bool QProcessResponseThread::ParseMultipleResponseData( QByteArray &byResponse )
{
    bool bRet = false;
    qint32 nIndex = byResponse.indexOf( Protocol::byToken );

    if ( -1 == nIndex ) {
        byResponse.clear( );
        return bRet; // No Head
    }

    if ( 0 < nIndex) { // Remove
        byResponse.remove( 0, nIndex );
    }

    qint32 nLen = Protocol::nTokenLength;
    if ( nLen == byResponse.length( ) ) {
        return bRet;
    }

    nLen += sizeof ( quint8 ); // MessageType
    nLen += sizeof ( quint32 ); // TcpStreamLength

    if ( nLen >= byResponse.length( ) ) {
        return bRet;
    }

    quint32 nTotal = GetStreamLength( byResponse );
    if ( nTotal > byResponse.length( ) ) {
        return bRet;
    }

    switch ( GetMessageType( byResponse ) ) {
    case Protocol::ResponseBallotSenseState :
        //nLen += 2;
        break;

    case Protocol::ResponseGateSenseState :
        //nLen += 2;
        break;

    case Protocol::ResponseInfraredState :
        //nLen += 2;
        break;

    case Protocol::ResponsePlateData :
        //nLen += 2;
        break;

    case Protocol::ResponseActiveSend :
        //nLen += 2;
        break;
    }

    ParseResponseData( byResponse );

    byResponse.remove( 0, nTotal ); // Remove one Request

    bRet = ( 0 < byResponse.length( ) );
    return bRet;
}
开发者ID:Anne081031，项目名称:ParkCode，代码行数:60，代码来源:qprocessresponsethread.cpp


示例11: WTRACE

void MMsgRoutingUnsubscribeDataObject::Unpack(void)
{
	WTRACE("MMsgRoutingUnsubscribeDataObject::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingUnsubscribeDataObject)
	{
		WDBG_AH("MMsgRoutingUnsubscribeDataObject::Unpack Not a RoutingUnsubscribeDataObject message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingUnsubscribeDataObject message.");
	}

	// read in the client/group id
	mLinkId = ReadClientOrGroupId();
	
	// read in the datatype length followed by the datatype itself
	unsigned char aDataTypeSize = ReadByte();
	mDataType.assign((unsigned char*)ReadBytes(aDataTypeSize), aDataTypeSize);
	
	// read in the flags
	unsigned char aFlags = ReadByte();
	mExactOrRecursiveFlag = ((aFlags & 0x01) != 0);
	mGroupOrMembersFlag   = ((aFlags & 0x02) != 0);
	
	WDBG_LL("MMsgRoutingUnsubscribeDataObject::Unpack Reading message data");
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:26，代码来源:MMsgRoutingUnsubDataObject.cpp


示例12: WTRACE

// TMsgAuth1LoginRequest2::Unpack
// Virtual method from TMessage.  Extracts data from message buffer.
// Note: call ForceRawBufOwn() to force ownership of the data buffers.
void
TMsgAuth1LoginRequest2::Unpack(void)
{
	WTRACE("TMsgAuth1LoginRequest2::Unpack");
	TMsgAuth1LoginBase2::Unpack();

	if ((GetServiceType() != WONMsg::Auth1Login) ||
	    (GetMessageType() != WONMsg::Auth1LoginRequest2
      && GetMessageType() != WONMsg::Auth1LoginRequest223 ))
	{
		WDBG_AH("TMsgAuth1LoginRequest2::Unpack Not a Auth1LoginRequest message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a Auth1LoginRequest2 message.");
	}

}
开发者ID:vgck，项目名称:opendr2，代码行数:19，代码来源:TMsgAuth1Login2.cpp


示例13: WTRACE

void MMsgRoutingGetUserListReply::Unpack(void)
{
	WTRACE("MMsgRoutingGetUserListReply::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingGetUserListReply)
	{
		WDBG_AH("MMsgRoutingGetUserListReply::Unpack Not a RoutingGetUserListReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingGetUserListReply message.");
	}

	WDBG_LL("MMsgRoutingGetUserListReply::Unpack Reading message data");

	// read in the status
	mStatus = ReadShort();

	// read in the user count
	unsigned short aNumUsers = ReadShort();

	// read in the user list
	mUserList.clear();
	for (int iUser = 0; iUser < aNumUsers; iUser++)
	{
		UserData aUser;
		ReadUserName(aUser.mUserName);

		mUserList.push_back(aUser);
	}
}
开发者ID:vgck，项目名称:opendr2，代码行数:30，代码来源:MMsgRoutingGetUserList.cpp


示例14: WTRACE

// TMsgDirGetDirContents::Unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
TMsgDirGetDirContentsReply::Unpack(void)
{
	WTRACE("TMsgDirGetDirContentsReply::Unpack");
	TMessage::Unpack();

	if ((GetServiceType() != WONMsg::DirServer) ||
	    (GetMessageType() != WONMsg::DirGetDirContentsReply))
	{
		WDBG_AH("TMsgDirGetDirContentsReply::Unpack Not a DirGetDirContentsReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirGetDirContentsReply message.");
	}

	WDBG_LL("TMsgDirGetDirContentsReply::Unpack Reading message data");
	mStatus = static_cast<ServerStatus>(static_cast<short>(ReadShort()));
	unsigned short anEntryCt = ReadShort();

	WDBG_LL("TMsgDirGetDirContentsReply::Unpack Reading " << anEntryCt << "entries.");
	mEntries.clear();
	for (int i=0; i < anEntryCt; i++)
	{
		DirServerEntry anEntry;
		UnpackEntry(anEntry);
		mEntries.push_back(anEntry);
	}
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:29，代码来源:TMsgDirGetDirContents.cpp


示例15: wf_process_cliprdr_event

void wf_process_cliprdr_event(wfContext *wfc, wMessage *event)
{
	switch (GetMessageType(event->id))
	{
		case CliprdrChannel_ClipCaps:
			wf_cliprdr_process_cb_clip_caps_event(wfc, (RDP_CB_CLIP_CAPS *)event);
			break;

		case CliprdrChannel_MonitorReady:
			wf_cliprdr_process_cb_monitor_ready_event(wfc, (RDP_CB_MONITOR_READY_EVENT *)event);
			break;

		case CliprdrChannel_FormatList:
			wf_cliprdr_process_cb_format_list_event(wfc, (RDP_CB_FORMAT_LIST_EVENT *) event);
			break;

		case CliprdrChannel_DataRequest:
			wf_cliprdr_process_cb_data_request_event(wfc, (RDP_CB_DATA_REQUEST_EVENT *) event);
			break;

		case CliprdrChannel_DataResponse:
			wf_cliprdr_process_cb_data_response_event(wfc, (RDP_CB_DATA_RESPONSE_EVENT *) event);
			break;

		default:
			break;
	}
}
开发者ID:HUTTAMI，项目名称:FreeRDP，代码行数:28，代码来源:wf_cliprdr.c


示例16: WTRACE

// SMsgDirG2GetNumEntitiesReply::Unpack
// Virtual method from SmallMessage.  Extracts data from message buffer.
void
SMsgDirG2GetNumEntitiesReply::Unpack(void)
{
	WTRACE("SMsgDirG2GetNumEntitiesReply::Unpack");
	SmallMessage::Unpack();

	if ((GetServiceType() != WONMsg::SmallDirServerG2) ||
	    (GetMessageType() != WONMsg::DirG2GetNumEntitiesReply))
	{
		WDBG_AH("SMsgDirG2GetNumEntitiesReply::Unpack Not a DirG2GetNumEntitiesReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirG2GetNumEntitiesReply message.");
	}

	WDBG_LL("SMsgDirG2GetNumEntitiesReply::Unpack Reading message data");
	unsigned short anEntryCt = ReadShort();

	WDBG_LL("SMsgDirG2GetNumEntitiesReply::Unpack Reading " << anEntryCt << " entries.");
	mEntries.clear();
	for (int i=0; i < anEntryCt; i++)
	{
		NumEntriesData anEntry;
		mEntries.push_back(anEntry);
		mEntries.back().first  = static_cast<short>(ReadShort());
		mEntries.back().second = ReadShort();
	}
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:29，代码来源:SMsgDirG2GetNumEntities.cpp


示例17: WTRACE

void MMsgRoutingCreateGroup::Unpack(void)
{
	WTRACE("MMsgRoutingCreateGroup::Unpack");
	RoutingServerMessage::Unpack();

	if (GetServiceType() != WONMsg::MiniRoutingServer || 
        GetMessageType() != WONMsg::RoutingCreateGroup)
	{
		WDBG_AH("MMsgRoutingCreateGroup::Unpack Not a RoutingCreateGroup message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__, "Not a RoutingCreateGroup message.");
	}

	WDBG_LL("MMsgRoutingCreateGroup::Unpack Reading message data");

	// read in group name
	ReadGroupName(mGroupName);
	
	// read in flags
	unsigned char aFlags = ReadByte();
	mIsPublic             = ((aFlags & 0x01) != 0);
	mAnnounceGroupChanges = ((aFlags & 0x02) != 0);

	// read in client count
	unsigned short aNumClients = ReadShort();

	// read in client list
	mClientList.clear();
	for (int iClient = 0; iClient < aNumClients; iClient++)
		mClientList.push_back(ReadClientId());
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:30，代码来源:MMsgRoutingCreateGroup.cpp


示例18: WTRACE

// TMsgDirFindServiceReply::Unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
TMsgDirFindServiceReply::Unpack(void)
{
	WTRACE("TMsgDirFindServiceReply::Unpack");
	TMessage::Unpack();

	if ((GetServiceType() != WONMsg::DirServer) ||
	    (GetMessageType() != WONMsg::DirFindServiceReply))
	{
		WDBG_AH("TMsgDirFindServiceReply::Unpack Not a DirFindServiceReply message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a DirFindServiceReply message.");
	}

	WDBG_LL("TMsgDirFindServiceReply::Unpack Reading message data");
	mStatus = static_cast<ServerStatus>(static_cast<short>(ReadShort()));

	// Service data only present if status is success
	if (mStatus == WONMsg::StatusCommon_Success)
	{
		mService.mType = DirServerEntry::EntryTypeService;
		ReadWString(mService.mPath);
		ReadWString(mService.mName);
		ReadWString(mService.mDisplayName);
		ReadWString(mService.mVersion);
		ReadWString(mService.mProtoName);
		ReadWString(mService.mProtoVersion);
		ReadWString(mService.mNetAddress);
		mService.mLifespan = ReadLong();
		mService.mCreated  = ReadLong();

		unsigned short aLen = ReadShort();
		mService.SetBlob(ReadBytes(aLen), aLen);
	}
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:37，代码来源:TMsgDirFindService.cpp


示例19: GetToken

void CDataParser::ProcessResponse( QByteArray &byStream )
{
    QByteArray byToken = GetToken( byStream );
    if ( byToken != Protocol::byToken ) {
        return;
    }

    Protocol::RequestType nMessageType = ( Protocol::RequestType ) GetMessageType( byStream );

    switch ( nMessageType ) {
    case Protocol::ResponseBallotSenseState :
        ProcessBallotSenseResponse( byStream );
        break;

    case Protocol::ResponseGateSenseState :
        ProcessGateSenseResponse( byStream );
        break;

    case Protocol::ResponseInfraredState :
        ProcessInfraredResponse( byStream );
        break;

    case Protocol::ResponsePlateData :
        ProcessPlateResponse( byStream );
        break;

    case Protocol::ResponseActiveSend :
        ProcessActiveSendResponse( byStream );
        break;
    }
}
开发者ID:Strongc，项目名称:SCPark，代码行数:31，代码来源:cdataparser.cpp


示例20: WTRACE

// TMsgCommQueryOptions::unpack
// Virtual method from TMessage.  Extracts data from message buffer.
void
TMsgCommQueryOptions::Unpack(void)
{
	WTRACE("TMsgCommQueryOptions::Unpack");
	mOptionList.clear();
	TMessage::Unpack();

	if ((GetServiceType() != WONMsg::CommonService) ||
	    (GetMessageType() != WONMsg::CommQueryOptions))
	{
		WDBG_AH("TMsgCommRehupOptions::Unpack Not a CommQueryOptions message!");
		throw WONMsg::BadMsgException(*this, __LINE__, __FILE__,
		                              "Not a CommQueryOptions message.");
	}

	// Get num options
	unsigned short aCt = ReadShort();

	WDBG_LL("TMsgCommQueryOptions::Unpack Reading " << aCt << "entries.");
	for (int i=0; i < aCt; i++)
	{
		string aBuf;
		ReadString(aBuf);
		mOptionList.push_back(aBuf);
	}
}
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:28，代码来源:TMsgCommQueryOptions.cpp



注：本文中的GetMessageType函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ GetMessageW函数代码示例发布时间：2022-05-30
下一篇：
C++ GetMessageTime函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap