C++ GetISpinner函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetISpinner函数的典型用法代码示例。如果您正苦于以下问题：C++ GetISpinner函数的具体用法？C++ GetISpinner怎么用？C++ GetISpinner使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetISpinner函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GetDlgItem

void ConvexApproximationObject::InitUI(HWND hWnd)
{
	m_UI_initalizationCompleted = false;

	HWND maxConcavityUI = GetDlgItem(hWnd, IDC_MAX_CONCAVITY);
	HWND maxConcavitySpinnerUI = GetDlgItem(hWnd, IDC_MAX_CONCAVITY_SPINNER);
	m_maxConcavity = GetICustEdit(maxConcavityUI);
	m_maxConcavitySpinner = GetISpinner (maxConcavitySpinnerUI);
	m_maxConcavitySpinner->LinkToEdit (maxConcavityUI, EDITTYPE_POS_FLOAT);
	m_maxConcavitySpinner->SetScale (0.01f);
	m_maxConcavitySpinner->SetLimits(0.01f, 100.0f);
	m_maxConcavitySpinner->SetValue(m_currentConcavity, TRUE);


	HWND maxSegmentsUI = GetDlgItem(hWnd, IDC_MAX_SEGMENTS);
	HWND maxSegmentsSpinnerUI = GetDlgItem(hWnd, IDC_MAX_SEGMENTS_SPINNER);
	m_maxSegments = GetICustEdit(maxSegmentsUI);
	m_maxSegmentsSpinner = GetISpinner (maxSegmentsSpinnerUI);
	m_maxSegmentsSpinner->LinkToEdit (maxSegmentsUI, EDITTYPE_POS_INT);
	m_maxSegmentsSpinner->SetScale (1.0f);
	m_maxSegmentsSpinner->SetLimits(1, 256);
	m_maxSegmentsSpinner->SetValue(m_currentMaxCount, TRUE);

	m_UI_initalizationCompleted = true;
}

开发者ID:Hurleyworks，项目名称:newton-dynamics，代码行数:25，代码来源:ConvexApproximation.cpp

示例2: CheckDlgButton

void RandKeysUtil::SetupWindow(HWND hWnd)
	{	
	this->hWnd = hWnd;

	CheckDlgButton(hWnd,IDC_RANDKEYS_TIME,doTime);
	CheckDlgButton(hWnd,IDC_RANDKEYS_VAL,doVal);

	iPosTime = GetISpinner(GetDlgItem(hWnd,IDC_RANDKEYS_POSTIMESPIN));
	iPosTime->SetLimits(0, TIME_PosInfinity, FALSE);
	iPosTime->SetScale(10.0f);
	iPosTime->LinkToEdit(GetDlgItem(hWnd,IDC_RANDKEYS_POSTIME), EDITTYPE_TIME);
	iPosTime->SetValue(posTime,FALSE);

	iNegTime = GetISpinner(GetDlgItem(hWnd,IDC_RANDKEYS_NEGTIMESPIN));
	iNegTime->SetLimits(0, TIME_PosInfinity, FALSE);
	iNegTime->SetScale(10.0f);
	iNegTime->LinkToEdit(GetDlgItem(hWnd,IDC_RANDKEYS_NEGTIME), EDITTYPE_TIME);
	iNegTime->SetValue(negTime,FALSE);

	iPosVal = GetISpinner(GetDlgItem(hWnd,IDC_RANDKEYS_POSVALSPIN));
	iPosVal->SetLimits(0.0f, 999999999.9f, FALSE);
	iPosVal->SetScale(0.1f);
	iPosVal->LinkToEdit(GetDlgItem(hWnd,IDC_RANDKEYS_POSVAL), EDITTYPE_FLOAT);
	iPosVal->SetValue(posVal,FALSE);

	iNegVal = GetISpinner(GetDlgItem(hWnd,IDC_RANDKEYS_NEGVALSPIN));
	iNegVal->SetLimits(0.0f, 999999999.0f, FALSE);
	iNegVal->SetScale(0.1f);
	iNegVal->LinkToEdit(GetDlgItem(hWnd,IDC_RANDKEYS_NEGVAL), EDITTYPE_FLOAT);
	iNegVal->SetValue(negVal,FALSE);

	SetStates();
	}

开发者ID:DimondTheCat，项目名称:xray，代码行数:33，代码来源:randkeys.cpp

示例3: EnableWindow

void TestSplitByAmountDlgProc::UpdateTypeDlg( HWND hWnd, int type )
{
	bool enable = (type == kSplitByAmount_testType_fraction);
	bool bRandom = enable;
	EnableWindow( GetDlgItem( hWnd, IDC_RATIOTEXT ), enable );
	ISpinnerControl* spin = GetISpinner( GetDlgItem( hWnd, IDC_RATIO2SPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );

	enable = (type == kSplitByAmount_testType_everyN);
	EnableWindow( GetDlgItem( hWnd, IDC_EVERYNTEXT ), enable );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_EVERYNSPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );

	enable = (type >= kSplitByAmount_testType_firstN);
	EnableWindow( GetDlgItem( hWnd, IDC_FIRSTNTEXT ), enable );
	EnableWindow( GetDlgItem( hWnd, IDC_PERSOURCE ), enable );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_FIRSTNSPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );

	EnableWindow( GetDlgItem( hWnd, IDC_UNIQUENESSBOX ), bRandom );
	EnableWindow( GetDlgItem( hWnd, IDC_SEEDTEXT ), bRandom );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_SEEDSPIN ) );
	spin->Enable( bRandom );
	ReleaseISpinner( spin );
	ICustButton* button = GetICustButton( GetDlgItem( hWnd, IDC_NEW ) );
	button->Enable( bRandom );
	ReleaseICustButton( button );
}

开发者ID:DimondTheCat，项目名称:xray，代码行数:31，代码来源:PFTestSplitByAmount_ParamBlock.cpp

示例4: ExportDlgProc

// Dialog proc
static INT_PTR CALLBACK ExportDlgProc(HWND hWnd, UINT msg,
	WPARAM wParam, LPARAM lParam)
{
	Interval animRange;
	ISpinnerControl  *spin;

	AscOut *exp = (AscOut*)GetWindowLongPtr(hWnd,GWLP_USERDATA); 
	switch (msg) {
	case WM_INITDIALOG:
		exp = (AscOut*)lParam;
		SetWindowLongPtr(hWnd,GWLP_USERDATA,lParam); 
		CenterWindow(hWnd, GetParent(hWnd)); 

		// Setup the spinner controls for the floating point precision 
		spin = GetISpinner(GetDlgItem(hWnd, IDC_PREC_SPIN)); 
		spin->LinkToEdit(GetDlgItem(hWnd,IDC_PREC), EDITTYPE_INT ); 
		spin->SetLimits(1, 10, TRUE); 
		spin->SetScale(1.0f);
		spin->SetValue(exp->GetPrecision() ,FALSE);
		ReleaseISpinner(spin);

		// Setup the spinner control for the static frame#
		// We take the frame 0 as the default value
		animRange = exp->GetInterface()->GetAnimRange();
		spin = GetISpinner(GetDlgItem(hWnd, IDC_STATIC_FRAME_SPIN)); 
		spin->LinkToEdit(GetDlgItem(hWnd,IDC_STATIC_FRAME), EDITTYPE_INT ); 
		spin->SetLimits(animRange.Start() / GetTicksPerFrame(), animRange.End() / GetTicksPerFrame(), TRUE); 
		spin->SetScale(1.0f);
		spin->SetValue(0, FALSE);
		ReleaseISpinner(spin);
		break;

	case CC_SPINNER_CHANGE:
		spin = (ISpinnerControl*)lParam; 
		break;

	case WM_COMMAND:
		switch (LOWORD(wParam)) {
		case IDOK:
			spin = GetISpinner(GetDlgItem(hWnd, IDC_PREC_SPIN)); 
			exp->SetPrecision(spin->GetIVal());
			ReleaseISpinner(spin);
		
			spin = GetISpinner(GetDlgItem(hWnd, IDC_STATIC_FRAME_SPIN)); 
			exp->SetStaticFrame(spin->GetIVal() * GetTicksPerFrame());
			ReleaseISpinner(spin);
			
			EndDialog(hWnd, 1);
			break;
		case IDCANCEL:
			EndDialog(hWnd, 0);
			break;
		}
		break;
		default:
			return FALSE;
	}
	return TRUE;
}

开发者ID:DimondTheCat，项目名称:xray，代码行数:60，代码来源:ascout.cpp

示例5: GetISpinner

void TestSpawnOnCollisionDlgProc::UpdateSpeedTypeDlg( HWND hWnd, int speedType )
{
	ISpinnerControl* spin = GetISpinner( GetDlgItem( hWnd, IDC_SPEEDSPIN ) );
	spin->Enable(speedType == kSpawnCollision_speedType_units);
	ReleaseISpinner(spin);
	spin = GetISpinner( GetDlgItem( hWnd, IDC_INHERITEDSPIN ) );
	spin->Enable(speedType == kSpawnCollision_speedType_inherited);
	ReleaseISpinner(spin);
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:9，代码来源:PFTestSpawnOnCollision_ParamBlock.cpp

示例6: GetISpinner

//----------------------------------------------------------------------------
BOOL PX2SceneExport::OnEnableFrameSpinners (HWND hWnd, BOOL bEnabled)
{
	ISpinnerControl* spinner = GetISpinner(GetDlgItem(hWnd,
		IDC_SPINNER_STARTFRAME)); 
	spinner->Enable(bEnabled);
	ReleaseISpinner(spinner); 
	spinner = GetISpinner(GetDlgItem(hWnd, IDC_SPINNER_ENDFRAME)); 
	spinner->Enable(bEnabled);
	return TRUE;
}

开发者ID:ascetic85，项目名称:Phoenix3d，代码行数:11，代码来源:PX2SceneExport.cpp

示例7: EnableWindow

void PFOperatorInstanceShapeDlgProc::UpdateScaleDlg( HWND hWnd, BOOL setScale)
{
	ISpinnerControl *spin;
	bool enable = (setScale != 0);

	EnableWindow( GetDlgItem( hWnd, IDC_VARIATIONTEXT ), enable );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_PARTICLESCALESPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_VARIATIONSPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );
}

开发者ID:artemeliy，项目名称:inf4715，代码行数:13，代码来源:PFOperatorInstanceShape_ParamBlock.cpp

示例8: GetISpinner

Value*
FooControl::set_property(Value** arg_list, int count)
{
	Value* val = arg_list[0];
	Value* prop = arg_list[1];

	if (prop == n_value)
	{
		value = val->to_float();
		if (parent_rollout != NULL && parent_rollout->page != NULL)
		{
			ISpinnerControl* spin = GetISpinner(GetDlgItem(parent_rollout->page, control_ID));
			if (spin_type == EDITTYPE_INT)
				spin->SetValue((int)value, FALSE);
			else
				spin->SetValue(value, FALSE);
			ReleaseISpinner(spin);
		}
	}
	else if (prop == n_range)
	{
		Point3 p;
		if (is_point3(val))
			p = val->to_point3();
		else
			throw TypeError (MaxSDK::GetResourceStringAsMSTR(IDS_SPINNER_RANGE_MUST_BE_A_VECTOR), val);
		min = p.x; max = p.y; value = p.z;

		if (parent_rollout != NULL && parent_rollout->page != NULL)
		{
			ISpinnerControl* spin = GetISpinner(GetDlgItem(parent_rollout->page, control_ID));
			if (spin_type == EDITTYPE_INT)
			{
				spin->SetLimits((int)p.x, (int)p.y, FALSE);
				spin->SetScale(1.0F);
				spin->SetValue((int)p.z, FALSE);
			}
			else
			{
				spin->SetLimits(p.x, p.y, FALSE);
				spin->SetScale(0.1F);
				spin->SetValue(p.z, FALSE);
			}
			ReleaseISpinner(spin);
		}
	}
	else
		return RolloutControl::set_property(arg_list, count);

	return val;
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:51，代码来源:tester.cpp

示例9: GetISpinner

void RendSpline::CheckAspectLock(TimeValue t)
{
	ParamID lengthID;
	ParamID widthID;
	ParamID aspectlockID;
	float length, width, aspect = 1.0f;
	BOOL aspectlocked = FALSE;

	if(UseViewOrRenderParams(t) == rbViewport)
	{
		widthID = rnd_v2_vpt_width;
		lengthID = rnd_v2_vpt_length;
		aspectlockID = rnd_v2_vpt_aspect_lock;
	}
	else
	{
		widthID = rnd_v2_width;
		lengthID = rnd_v2_length;
		aspectlockID = rnd_v2_aspect_lock;
	}
	pblock->GetValue(lengthID,t,length,FOREVER);
	pblock->GetValue(widthID,t,width,FOREVER);
	pblock->GetValue(aspectlockID,t,aspectlocked,FOREVER);	

	IParamMap2 *map = pblock->GetMap(0);

	if(map)
	{
		ISpinnerControl *iSpin = GetISpinner(GetDlgItem(map->GetHWnd(), IDC_ASPECTSPIN));
		aspect = iSpin->GetFVal();
	}

	pblock->GetMap()->Enable(aspectlockID,((length != 0.0f && width != 0.0f && aspect != 0.0f) || aspectlocked));
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:34，代码来源:rendspline.cpp

示例10: NumMapsDlgProc

static INT_PTR CALLBACK NumMapsDlgProc(
		HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam)
	{
	switch (msg) {
		case WM_INITDIALOG: {
			ISpinnerControl *spin = 
				SetupIntSpinner(
					hWnd,IDC_COMP_NUMMAPSSPIN,IDC_COMP_NUMMAPS,
					2,1000,(int)lParam);
			ReleaseISpinner(spin);
			CenterWindow(hWnd,GetParent(hWnd));
			break;
			}

		case WM_COMMAND:
			switch (LOWORD(wParam)) {
				case IDOK: {
					ISpinnerControl *spin = 
						GetISpinner(GetDlgItem(hWnd,IDC_COMP_NUMMAPSSPIN));
					EndDialog(hWnd,spin->GetIVal());
					ReleaseISpinner(spin);
					break;
					}

				case IDCANCEL:
					EndDialog(hWnd,-1);
					break;
				}
			break;

		default:
			return FALSE;
		}
	return TRUE;
	}

开发者ID:2asoft，项目名称:xray，代码行数:35，代码来源:composit.cpp

示例11: FixHeight

void FixHeight(IParamBlock *pblock,TimeValue t,HWND hWnd,BOOL increate)
{ float radius,height,r2,minh;
  BOOL con,minush;

	pblock->GetValue(PB_RADIUS,t,radius,FOREVER);
	pblock->GetValue(PB_CENTERS,t,con,FOREVER);
	pblock->GetValue(PB_HEIGHT,(increate?0:t),height,FOREVER);
	r2=2.0f*radius;
	minush=height<0.0f;
	minh=((minush)?-r2:r2);
	height=(float)fabs(height);
	if (con) height+=r2;
	if (hWnd)
    { ISpinnerControl *spin2 = GetISpinner(GetDlgItem(hWnd,IDC_SC_HEIGHTSPIN));
	  if (minush) spin2->SetLimits(MIN_HEIGHT,minh);
	  else spin2->SetLimits(minh,BMAX_HEIGHT,FALSE);
	  ReleaseISpinner(spin2);
	}
//O.Z. *** begin fix for bug# 175299
	if (height<r2)  
		pblock->SetValue(PB_HEIGHT,(increate?0:t),minh+DEF_HEIGHT);
	else if ( (fabs(height)-fabs(2.0f * radius)) <= .001f)
		pblock->SetValue(PB_HEIGHT,(increate?0:t),(height+DEF_HEIGHT));
//O.Z. *** end bug fix

}

开发者ID:artemeliy，项目名称:inf4715，代码行数:26，代码来源:scuba.cpp

示例12: EnableWindow

void PFOperatorForceSpaceWarpDlgProc::UpdateInfluenceDlg( HWND hWnd, bool enable )
{
	EnableWindow( GetDlgItem( hWnd, IDC_INFLUENCETEXT), enable );
	ISpinnerControl* spin = GetISpinner( GetDlgItem( hWnd, IDC_INFLUENCESPIN ) );
	spin->Enable(enable);
	ReleaseISpinner( spin );
}

开发者ID:whztt07，项目名称:OgreGameProject，代码行数:7，代码来源:PFOperatorForceSpaceWarp_ParamBlock.cpp

示例13: TurnSpinner

		void TurnSpinner(HWND hWnd,int SpinNum,BOOL ison)
			{	
			ISpinnerControl *spin2 = GetISpinner(GetDlgItem(hWnd,SpinNum));
			if (ison) spin2->Enable();else spin2->Disable();
			ReleaseISpinner(spin2);

			};

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:7，代码来源:torus.cpp

示例14: SetupMtlSubNameCombo

void MaterialUIHandler::ValidateUINameCombo (HWND hWnd, EPolyMod *pMod) {
	SetupMtlSubNameCombo (hWnd, pMod);
	ISpinnerControl* spin = NULL;
	spin = GetISpinner(GetDlgItem(hWnd,IDC_MAT_IDSPIN));
	if (spin) UpdateNameCombo (hWnd, spin);
	ReleaseISpinner(spin);
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:7，代码来源:EditPolyUISurface.cpp

示例15: GetICustEdit

void EllipseObject::UpdateUI(HWND hwnd)
{
	Interval valid;
	BOOL build_outine = FALSE;
	TimeValue t = ip? ip->GetTime() : 0;

	myParamBlock->GetValue(PB_OUTLINE, t, build_outine, valid);
	ICustEdit *thickness_edit = GetICustEdit(GetDlgItem(hwnd, IDC_THICKNESSEDIT));
	ISpinnerControl *thickness_spin = GetISpinner(GetDlgItem(hwnd, IDC_THICKSPINNER));

	if(!thickness_edit || !thickness_spin)
		return;

	if(build_outine)
	{
		EnableWindow(GetDlgItem(hwnd,IDC_THICKNESS_TEXT),TRUE);
		thickness_edit->Enable();
		thickness_spin->Enable();
	}
	else
	{
		EnableWindow(GetDlgItem(hwnd,IDC_THICKNESS_TEXT),FALSE);
		thickness_edit->Disable();
		thickness_spin->Disable();
	}

	ReleaseICustEdit(thickness_edit);
	ReleaseISpinner(thickness_spin);
}

开发者ID:artemeliy，项目名称:inf4715，代码行数:29，代码来源:ellipse.cpp

示例16: EnableWindow

void TestGoToRotationDlgProc::UpdateMatchDlg( HWND hWnd, int matchSpin )
{
	bool enable = (matchSpin == 0);
	EnableWindow( GetDlgItem(hWnd, IDC_SPINTEXT), enable );
	ISpinnerControl* spin = GetISpinner( GetDlgItem( hWnd, IDC_SPINRATESPIN ) );
	spin->Enable(enable);
	ReleaseISpinner(spin);
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:8，代码来源:PFTestGoToRotation_ParamBlock.cpp

示例17: EnableWindow

void PFOperatorSimpleOrientationDlgProc::SetCtlByDir(IParamMap2* map, HWND hWnd)
{
	BOOL bEulerSpinOn = false;
	if(map && hWnd) {
		IParamBlock2* ppb = map->GetParamBlock();
		if(ppb) {
			int iDir = ppb->GetInt(kSimpleOrientation_direction, 0);
			if((iDir == kSO_World) || (iDir == kSO_Speed) || (iDir == kSO_SpeedFollow))
				bEulerSpinOn = true;

			EnableWindow(GetDlgItem(hWnd, IDC_XTEXT), bEulerSpinOn);
			ISpinnerControl* psc = GetISpinner(GetDlgItem(hWnd, IDC_XSPIN));
			psc->Enable(bEulerSpinOn);
			ReleaseISpinner(psc);
			EnableWindow(GetDlgItem(hWnd, IDC_YTEXT), bEulerSpinOn);
			psc = GetISpinner(GetDlgItem(hWnd, IDC_YSPIN));
			psc->Enable(bEulerSpinOn);
			ReleaseISpinner(psc);
			EnableWindow(GetDlgItem(hWnd, IDC_ZTEXT), bEulerSpinOn);
			psc = GetISpinner(GetDlgItem(hWnd, IDC_ZSPIN));
			psc->Enable(bEulerSpinOn);
			ReleaseISpinner(psc);
			bool bDivergenceAvailable = ((iDir != kSO_Rand_3D) && (iDir != kSO_SpeedFollow));
			EnableWindow(GetDlgItem(hWnd, IDC_DIVERGENCETEXT), bDivergenceAvailable);
			psc = GetISpinner(GetDlgItem(hWnd, IDC_DIVERGENCESPIN));
			psc->Enable(bDivergenceAvailable);
			ReleaseISpinner(psc);
			
			EnableWindow(GetDlgItem(hWnd, IDC_RESTRICTTOAXIS), bDivergenceAvailable);
			bool bRestrictToAxis = (ppb->GetInt(kSimpleOrientation_restrictToAxis, 0) != 0) && bDivergenceAvailable;
			EnableWindow(GetDlgItem(hWnd, IDC_DIVERGENCEAXISBOX), bRestrictToAxis);
			EnableWindow(GetDlgItem(hWnd, IDC_AXISXTEXT), bRestrictToAxis);
			psc = GetISpinner(GetDlgItem(hWnd, IDC_AXISXSPIN));
			psc->Enable(bRestrictToAxis);
			ReleaseISpinner(psc);
			EnableWindow(GetDlgItem(hWnd, IDC_AXISYTEXT), bRestrictToAxis);
			psc = GetISpinner(GetDlgItem(hWnd, IDC_AXISYSPIN));
			psc->Enable(bRestrictToAxis);
			ReleaseISpinner(psc);
			EnableWindow(GetDlgItem(hWnd, IDC_AXISZTEXT), bRestrictToAxis);
			psc = GetISpinner(GetDlgItem(hWnd, IDC_AXISZSPIN));
			psc->Enable(bRestrictToAxis);
			ReleaseISpinner(psc);

			bool bChaosAvailable = (iDir != kSO_SpeedFollow);
			EnableWindow(GetDlgItem(hWnd, IDC_UNIQUENESSBOX), bChaosAvailable);
			EnableWindow(GetDlgItem(hWnd, IDC_SEEDTEXT), bChaosAvailable);
			psc = GetISpinner(GetDlgItem(hWnd, IDC_SEEDSPIN));
			psc->Enable(bChaosAvailable);
			ReleaseISpinner(psc);
			ICustButton* but = GetICustButton(GetDlgItem(hWnd, IDC_NEW));
			but->Enable(bChaosAvailable);
			ReleaseICustButton(but);
		}
	}
}

开发者ID:artemeliy，项目名称:inf4715，代码行数:56，代码来源:PFOperatorSimpleOrientation_ParamBlock.cpp

示例18: EnableWindow

void PFOperatorSimplePositionDlgProc::UpdateInheritSpeedDlg( HWND hWnd, BOOL lock, BOOL inherit )
{
	EnableWindow( GetDlgItem( hWnd, IDC_INHERIT ), !lock );
	bool useInherit = ((lock == 0) && (inherit != 0));
	EnableWindow( GetDlgItem( hWnd, IDC_MULTIPLIERTEXT ), useInherit);
	ISpinnerControl* spin = GetISpinner( GetDlgItem( hWnd, IDC_MULTIPLIERSPIN ) );
	spin->Enable(useInherit);
	ReleaseISpinner( spin );
}

开发者ID:DimondTheCat，项目名称:xray，代码行数:9，代码来源:PFOperatorSimplePosition_ParamBlock.cpp

示例19: TrackPropDlgProc

INT_PTR CALLBACK TrackPropDlgProc(HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam) {
	BlockControl *blk = (BlockControl*)GetWindowLongPtr(hWnd,GWLP_USERDATA);

	ISpinnerControl *spin;
	static TSTR zero = FormatUniverseValue(0.0f);
	Rect rect;

	switch (msg) {
	case WM_INITDIALOG:
		{
		blk = (BlockControl*)lParam;
		SetWindowLongPtr(hWnd,GWLP_USERDATA,lParam);

		Interval range = GetCOREInterface()->GetAnimRange();

		
		spin = GetISpinner(GetDlgItem(hWnd,IDC_STARTSPIN));
		spin->SetLimits(-999999.0f,9999999.0f, FALSE);
		spin->SetAutoScale();
		spin->LinkToEdit(GetDlgItem(hWnd,IDC_START), EDITTYPE_INT);
		spin->SetValue(range.Start()/GetTicksPerFrame(),FALSE);
		ReleaseISpinner(spin);

		blk->propStart = range.Start()/GetTicksPerFrame();
		CenterWindow(hWnd,GetParent(hWnd));
		break;
		}
		
	case CC_SPINNER_CHANGE:
		spin = (ISpinnerControl*)lParam;
		switch (LOWORD(wParam)) {
		case IDC_STARTSPIN: blk->propStart = spin->GetIVal(); break;
		}
		break;



	case WM_COMMAND:
		switch (LOWORD(wParam)) {
		case IDOK:
			{
			EndDialog(hWnd,1);
			blk->NotifyDependents(FOREVER, PART_ALL, REFMSG_CHANGE);

			break;
			}
		case IDCANCEL:
			EndDialog(hWnd,0);
			break;
		}
		break;

	default:
		return FALSE;
	}
	return TRUE;
}

开发者ID:2asoft，项目名称:xray，代码行数:57，代码来源:blockcontrol.cpp

示例20: GetString

void FloatLimitControlDlg::SetupUI()
{
	// Set the control labels
	::SetWindowText(GetDlgItem(mHWnd, IDC_LIMITCTRL_UPPERBOX), GetString(IDS_FLOATLIMITCTRL_UPPERLIMITUI));
	::SetWindowText(GetDlgItem(mHWnd, IDC_LIMITCTRL_LOWERBOX), GetString(IDS_FLOATLIMITCTRL_LOWERLIMITUI));
	::SetWindowText(GetDlgItem(mHWnd, IDC_LIMITCTRL_UPPERLIMITCHECK), GetString(IDS_FLOATLIMITCTRL_ENABLED_UI));
	::SetWindowText(GetDlgItem(mHWnd, IDC_LIMITCTRL_LOWERLIMITCHECK), GetString(IDS_FLOATLIMITCTRL_ENABLED_UI));
	::SetWindowText(GetDlgItem(mHWnd, IDC_LIMITCTRL_UPPER_WIDTH_STATIC), GetString(IDS_FLOATLIMITCTRL_SMOOTHING_UI));
	::SetWindowText(GetDlgItem(mHWnd, IDC_LIMITCTRL_LOWER_WIDTH_STATIC), GetString(IDS_FLOATLIMITCTRL_SMOOTHING_UI));

	mUpperLimitSpin = GetISpinner(GetDlgItem(mHWnd, IDC_LIMITCTRL_UPPERLIMITSPIN));
	if (mUpperLimitSpin)
	{
		mUpperLimitSpin->SetLimits(s_minLimit, s_maxLimit, FALSE);
		mUpperLimitSpin->SetScale(1.0f);
		mUpperLimitSpin->LinkToEdit(
			GetDlgItem(mHWnd, IDC_LIMITCTRL_UPPERLIMIT), EDITTYPE_FLOAT);
	}
	mLowerLimitSpin = GetISpinner(GetDlgItem(mHWnd, IDC_LIMITCTRL_LOWERLIMITSPIN));
	if (mLowerLimitSpin)
	{
		mLowerLimitSpin->SetLimits(s_minLimit, s_maxLimit, FALSE);
		mLowerLimitSpin->SetScale(1.0f);
		mLowerLimitSpin->LinkToEdit(
			GetDlgItem(mHWnd, IDC_LIMITCTRL_LOWERLIMIT), EDITTYPE_FLOAT);
	}

	mUpperWidthSpin = GetISpinner(GetDlgItem(mHWnd, IDC_LIMITCTRL_UPPERLIMIT_W_SPIN));
	if (mUpperWidthSpin)
	{
		mUpperWidthSpin->SetLimits(0.0f, s_maxLimit, FALSE);
		mUpperWidthSpin->SetScale(1.0f);
		mUpperWidthSpin->LinkToEdit(
			GetDlgItem(mHWnd, IDC_LIMITCTRL_UPPERLIMIT_W), EDITTYPE_FLOAT);
	}
	mLowerWidthSpin = GetISpinner(GetDlgItem(mHWnd, IDC_LIMITCTRL_LOWERLIMIT_W_SPIN));
	if (mLowerWidthSpin)
	{
		mLowerWidthSpin->SetLimits(0.0f, s_maxLimit, FALSE);
		mLowerWidthSpin->SetScale(1.0f);
		mLowerWidthSpin->LinkToEdit(
			GetDlgItem(mHWnd, IDC_LIMITCTRL_LOWERLIMIT_W), EDITTYPE_FLOAT);
	}
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:44，代码来源:LimitController.cpp

注：本文中的GetISpinner函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetIcon函数代码示例发布时间：2022-05-30

C++ GetIP函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19200|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9989|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8328|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8697|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8640|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9659|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8625|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8000|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8657|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7536|2022-11-06

客服电话

电子邮件

C++ GetISpinner函数代码示例

示例1: GetDlgItem

示例2: CheckDlgButton

示例3: EnableWindow

示例4: ExportDlgProc

示例5: GetISpinner

示例6: GetISpinner

示例7: EnableWindow

示例8: GetISpinner

示例9: GetISpinner

示例10: NumMapsDlgProc

示例11: FixHeight

示例12: EnableWindow

示例13: TurnSpinner

示例14: SetupMtlSubNameCombo

示例15: GetICustEdit

示例16: EnableWindow

示例17: EnableWindow

示例18: EnableWindow

示例19: TrackPropDlgProc

示例20: GetString

请发表评论

全部评论

上一篇：

下一篇：

nirenr/AndroLua_pro: Lua5.3.3 for androi

samhitha1/demo: Sample for ANT/Maven Scr

geb/geb-example-maven

senryulearning/MastodonWikiSenryu

rstropek/pandoc-latex: Extended version

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053