C++ GetICustButton函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetICustButton函数的典型用法代码示例。如果您正苦于以下问题：C++ GetICustButton函数的具体用法？C++ GetICustButton怎么用？C++ GetICustButton使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetICustButton函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: switch

INT_PTR EditPolyPaintDeformDlgProc::DlgProc (TimeValue t, IParamMap2 *pmap, HWND hWnd,
						   UINT msg, WPARAM wParam, LPARAM lParam)
{
	//BOOL ret;
	switch (msg) {
	case WM_INITDIALOG: {
			uiValid = false;
			ICustButton *btn = GetICustButton(GetDlgItem(hWnd,IDC_PAINTDEFORM_PUSHPULL));
			btn->SetType(CBT_CHECK);
			ReleaseICustButton(btn);

			btn = GetICustButton(GetDlgItem(hWnd,IDC_PAINTDEFORM_RELAX));
			btn->SetType(CBT_CHECK);
			ReleaseICustButton(btn);

			btn = GetICustButton(GetDlgItem(hWnd,IDC_PAINTDEFORM_REVERT));
			btn->SetType(CBT_CHECK);
			ReleaseICustButton(btn);
			break;
		}

	case WM_PAINT:
		if (uiValid) break;
		SetEnables (hWnd);
		break;

	case WM_COMMAND:
		//uiValid = false;
		switch (LOWORD(wParam)) {
		case IDC_PAINTDEFORM_PUSHPULL:
			mpEPoly->OnPaintBtn( PAINTMODE_PAINTPUSHPULL, t );
			SetEnables (hWnd);
			break;
		case IDC_PAINTDEFORM_RELAX:
			mpEPoly->OnPaintBtn( PAINTMODE_PAINTRELAX, t );
			SetEnables (hWnd);
			break;
		case IDC_PAINTDEFORM_REVERT:
			mpEPoly->OnPaintBtn( PAINTMODE_ERASEDEFORM, t );
			SetEnables (hWnd);
			break;
		case IDC_PAINTDEFORM_APPLY:
			theHold.Begin ();
			mpEPoly->EpModCommit (t, false, true);
			theHold.Accept (GetString (IDS_PAINTDEFORM));
			break;
		case IDC_PAINTDEFORM_CANCEL:
			mpEPoly->EpModCancel ();
			break;
		case IDC_PAINTDEFORM_OPTIONS:
			GetMeshPaintMgr()->BringUpOptions();
			break;

		default:
			InvalidateUI (hWnd);
			break;
		}
	}
	return FALSE;
}

开发者ID:artemeliy，项目名称:inf4715，代码行数:60，代码来源:EditPolyPaint.cpp

示例2: LOWORD

INT_PTR MonoFlectorTypeObjDlgProc::DlgProc(TimeValue t, IParamMap2 *map, HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam)
{
	int id = LOWORD(wParam);
	switch (msg) 
	{
		case WM_INITDIALOG:
		{ 	ICustButton *iBut = GetICustButton(GetDlgItem(hWnd,IDC_EP_PICKBUTTON));
			iBut->SetType(CBT_CHECK);
			iBut->SetHighlightColor(GREEN_WASH);
			ReleaseICustButton(iBut);
			mf->hParams=hWnd;
			mf->ShowName(mf->pblock2->GetINode(PB_MESHNODE));
		}
			break;
		case WM_DESTROY:
			ICustButton *iBut;
			iBut=GetICustButton(GetDlgItem(hWnd,IDC_EP_PICKBUTTON));
			if (iBut) iBut->SetCheck(FALSE);
			ReleaseICustButton(iBut);
			break;
		case WM_COMMAND:
			switch(LOWORD(wParam)) 
			{
			  case IDC_EP_PICKBUTTON:
			  { sso->IntoPickMode();
				break;
			  }
			}
			break;
	}
	return TRUE;
}

开发者ID:artemeliy，项目名称:inf4715，代码行数:32，代码来源:monoflectordialog.cpp

示例3: Update

    /// Called to update the controls of the dialog
    virtual void    Update( TimeValue t, Interval &valid, IParamMap2 *map )
    {
        ICustButton     *bmSelectBtn;
        IParamBlock2    *pblock;
        int             i;
        long            buttons[ 6 ] = { IDC_FRONT_NAME, IDC_BACK_NAME, IDC_LEFT_NAME, IDC_RIGHT_NAME, IDC_TOP_NAME, IDC_BOTTOM_NAME };
        BitmapInfo      bi;


        ParamMap2UserDlgProc::Update( t, valid, map );

        pblock = map->GetParamBlock();
        for( i = plStaticEnvLayer::kBmpFrontBitmap; i <= plStaticEnvLayer::kBmpBottomBitmap; i++ )
        {
            bmSelectBtn = GetICustButton( GetDlgItem( map->GetHWnd(), buttons[ i ] ) );
            PBBitmap *pbbm = pblock->GetBitmap( i, t );
            if( pbbm )
                bmSelectBtn->SetText( (TCHAR *)pbbm->bi.Filename() );
            else
                bmSelectBtn->SetText( _T( "None" ) );
            ReleaseICustButton( bmSelectBtn );
        }

        plStaticEnvLayer *layer = (plStaticEnvLayer *)map->GetParamBlock()->GetOwner();
        bi.SetName( layer->GetBaseFilename( t ) );
        SetDlgItemText( map->GetHWnd(), IDC_BASE_FILENAME, bi.Filename() );
        map->Enable( plStaticEnvLayer::kBmpGenerateFaces, ( bi.Name() == NULL || bi.Name()[ 0 ] == 0 ) ? FALSE : TRUE );

        bmSelectBtn = GetICustButton( GetDlgItem( map->GetHWnd(), IDC_GENERATE_FACES ) );
        bmSelectBtn->SetText( _T( "Generate From Node" ) );
        ReleaseICustButton( bmSelectBtn );

        i = pblock->GetInt( plStaticEnvLayer::kBmpTextureSize, t );
        pblock->SetValue( plStaticEnvLayer::kBmpLastTextureSize, t, i );
    }

开发者ID:MareinK，项目名称:Plasma，代码行数:36，代码来源:plStaticEnvLayerBitmapPB.cpp

示例4: SetWindowText

void ParticleMesherObject::UpdateUI()
{
   Point3 min,max;
   pblock2->GetValue(particlemesher_customboundsa,0,min,FOREVER);
   pblock2->GetValue(particlemesher_customboundsb,0,max,FOREVER);


   Box3 box;
   box.Init();
   box += min;
   box += max;

   
   TSTR text;
   BOOL useBounds;
   pblock2->GetValue(particlemesher_usecustombounds, 0, useBounds, FOREVER);

   if (useBounds)
      {
      if (box.IsEmpty())
         text.printf(_T("%s"),GetString(IDS_EMPTY));
      else 
         {
         text.printf(_T("(%0.0f,%0.0f,%0.0f)"),min.x,min.y,min.z);
         SetWindowText(GetDlgItem(hParams,IDC_BOUNDSTEXT),
            text);
         text.printf(_T("(%0.0f,%0.0f,%0.0f)"),max.x,max.y,max.z);
         SetWindowText(GetDlgItem(hParams,IDC_BOUNDSTEXT2),
            text);
         }

//make sure we only enable the button in the modify panel
// bug 257747 1/30/01 watje
      if (ip)
         {
         ICustButton *iBut = GetICustButton(GetDlgItem(hParams,IDC_PICKBB));
         if (ip->GetCommandPanelTaskMode()==TASK_MODE_MODIFY)
            {
            if (iBut) iBut->Enable(TRUE);
            }
         ReleaseICustButton(iBut);
         }

      }
   else
      {
      text.printf(_T(" "));
      SetWindowText(GetDlgItem(hParams,IDC_BOUNDSTEXT),
         text);
      text.printf(_T(" "));
      SetWindowText(GetDlgItem(hParams,IDC_BOUNDSTEXT2),
         text);
      ICustButton *iBut = GetICustButton(GetDlgItem(hParams,IDC_PICKBB));
      if (iBut) iBut->Enable(FALSE);
      ReleaseICustButton(iBut);

      }
   
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:59，代码来源:particlemesher.cpp

示例5: GetICustButton

void
BlobMesh::DisableButtons(HWND hWnd)
{
	if (GetCOREInterface()->GetCommandPanelTaskMode() == TASK_MODE_CREATE)
		{
		ICustButton *iBut = GetICustButton(GetDlgItem(hWnd, IDC_ADD));
		if (iBut)
			{
			iBut->Enable(FALSE);
			ReleaseICustButton(iBut);
			}

		iBut = NULL;
		iBut = GetICustButton(GetDlgItem(hWnd, IDC_PICK));
		if (iBut)
			{
			iBut->Enable(FALSE);
			ReleaseICustButton(iBut);
			}
			
		iBut = NULL;
		iBut = GetICustButton(GetDlgItem(hWnd, IDC_REMOVE));
		if (iBut)
			{
			iBut->Enable(FALSE);
			ReleaseICustButton(iBut);
			}
			

		}
	else
		{
		ICustButton *iBut = GetICustButton(GetDlgItem(hWnd, IDC_ADD));
		if (iBut)
			{
			iBut->Enable(TRUE);
			iBut->SetHighlightColor(GREEN_WASH);
			
			ReleaseICustButton(iBut);
			}

		iBut = NULL;
		iBut = GetICustButton(GetDlgItem(hWnd, IDC_PICK));
		if (iBut)
			{
			iBut->Enable(TRUE);
			iBut->SetType(CBT_CHECK);
			iBut->SetHighlightColor(GREEN_WASH);
			ReleaseICustButton(iBut);
			}

		}
}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:53，代码来源:DlgProcs.cpp

示例6: LOWORD

//WIN32 : BOOL UVWFrameDlgProc::DlgProc(TimeValue t, IParamMap2 *map, HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam)
INT_PTR UVWFrameDlgProc::DlgProc(TimeValue t, IParamMap2 *map, HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam)
{
	int id = LOWORD(wParam);
	switch (msg) 
	{
		case WM_INITDIALOG:
			SetWindowText(GetDlgItem(hWnd,IDC_TKU_ABOUT),UVWFRAME_LABEL);
			if (sho->uvwMesh)
				SetWindowText(GetDlgItem(hWnd, IDC_UVWF_PICKOBJ), sho->uvwMesh->GetName()); 
			else
				SetWindowText(GetDlgItem(hWnd, IDC_UVWF_PICKOBJ), _T("Pick Object")); 

			LoadImages();
			ICustButton *iTmp;

			iTmp = GetICustButton(GetDlgItem(hWnd,IDC_TL_ABOUT));
			iTmp->SetImage(hAboutImage, 0, 0, 0, 0, 16, 16);
			iTmp->SetTooltip(TRUE,_T("About UVW Frame"));

			iTmp = GetICustButton(GetDlgItem(hWnd,IDC_TL_HELP));
			iTmp->SetImage(hHelpImage, 0, 0, 0, 0, 16, 16);
			iTmp->SetTooltip(TRUE,_T("UVW Frame Help"));

			ReleaseICustButton(iTmp);
		break;

		case WM_DESTROY:
		break;

		case WM_COMMAND:
			switch(id) 
			{
				case IDC_TL_ABOUT:
					DialogBoxParam(	hInstance, MAKEINTRESOURCE(IDD_ABOUT), GetCOREInterface()->GetMAXHWnd(), AboutDlgProc, 0);
				break;

				case IDC_TL_HELP:
					ShellExecute(NULL, _T("open"), _T("http://www.mankua.com/uvwframe.php"), NULL, NULL, SW_SHOWNORMAL);
				break;

				case IDC_UVWF_SAVE:
					sho->SaveUVW(hWnd);
				break;

				case IDC_UVWF_LOAD:
					sho->LoadUVW(hWnd);
				break;
			}
		break;
	}

	return FALSE;
}

开发者ID:Mankua，项目名称:uvwframe，代码行数:54，代码来源:uvwframe.cpp

示例7: Set

    void Set(PB2Value& val, ReferenceMaker* owner, ParamID id, int tabIndex, TimeValue t)
    {
        if (!owner)
            return;

        plStaticEnvLayer* layer = (plStaticEnvLayer*)owner;
        IParamBlock2 *pb = layer->GetParamBlockByID(plStaticEnvLayer::kBlkBitmap);

        switch (id)
        {
        case plStaticEnvLayer::kBmpFrontBitmap:
        case plStaticEnvLayer::kBmpBackBitmap:
        case plStaticEnvLayer::kBmpLeftBitmap:
        case plStaticEnvLayer::kBmpRightBitmap:
        case plStaticEnvLayer::kBmpTopBitmap:
        case plStaticEnvLayer::kBmpBottomBitmap:
            // Set up the enums so these would match...
            if (pb->GetMap())
                pb->GetMap()->Invalidate( id );
            // Update the bitmap saved by the layer
            //layer->SetBitmap( id, &val.bm->bi );
            break;

        case plStaticEnvLayer::kBmpBaseFilename:
            if( pb->GetMap() )
            {
                pb->GetMap()->Enable( plStaticEnvLayer::kBmpGenerateFaces, ( val.s == NULL || val.s[ 0 ] == 0 ) ? FALSE : TRUE );

                ICustButton     *bmSelectBtn = GetICustButton( GetDlgItem( pb->GetMap()->GetHWnd(), IDC_GENERATE_FACES ) );
                bmSelectBtn->SetText( _T( "Generate From Node" ) );
                ReleaseICustButton( bmSelectBtn );
            }
            break;
        }
    }

开发者ID:MareinK，项目名称:Plasma，代码行数:35，代码来源:plStaticEnvLayerBitmapPB.cpp

示例8: switch

BOOL SWrapObjectDlgProc::DlgProc(
		TimeValue t,IParamMap *map,HWND hWnd,UINT msg,WPARAM wParam,LPARAM lParam)
	{int FToTick=(int)((float)TIME_TICKSPERSEC/(float)GetFrameRate());
	switch (msg) {
		case WM_INITDIALOG: {
			ICustButton *iBut = GetICustButton(GetDlgItem(hWnd,IDC_AP_WRAPBUTTON));
			iBut->SetType(CBT_CHECK);
			iBut->SetHighlightColor(GREEN_WASH);
			ReleaseICustButton(iBut);
			po->hParams=hWnd;
			Update(t);
			return FALSE;	// stop default keyboard focus - DB 2/27  
			}
		case WM_COMMAND:
			switch (LOWORD(wParam)) 
			{    case IDC_AP_WRAPBUTTON:
				   { if (po->ip->GetCommandMode()->ID() == CID_STDPICK) 
					{ if (po->creating) 
						{  theCreateSWrapObjectMode.JumpStart(po->ip,po);
							po->ip->SetCommandMode(&theCreateSWrapObjectMode);
						} else {po->ip->SetStdCommandMode(CID_OBJMOVE);}
					} else 
						{ po->pickCB.po = po;						
						  po->ip->SetPickMode(&po->pickCB);
						}
					break;
				}

			}
			break;	
		}
	return TRUE;
	}

开发者ID:2asoft，项目名称:xray，代码行数:33，代码来源:surfwrap.cpp

示例9: GetICustButton

void PickOrientNode::ExitMode(IObjParam *ip)
	{
	ICustButton *iBut = GetICustButton(GetDlgItem(p->hWnd,IDC_ORIENT_TARG_PICKNODE));
	if (iBut) iBut->SetCheck(FALSE);
	ReleaseICustButton(iBut);
	GetCOREInterface()->PopPrompt();
	}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:7，代码来源:orientation_cnstrnt.cpp

示例10: EnableWindow

void TestSplitByAmountDlgProc::UpdateTypeDlg( HWND hWnd, int type )
{
	bool enable = (type == kSplitByAmount_testType_fraction);
	bool bRandom = enable;
	EnableWindow( GetDlgItem( hWnd, IDC_RATIOTEXT ), enable );
	ISpinnerControl* spin = GetISpinner( GetDlgItem( hWnd, IDC_RATIO2SPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );

	enable = (type == kSplitByAmount_testType_everyN);
	EnableWindow( GetDlgItem( hWnd, IDC_EVERYNTEXT ), enable );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_EVERYNSPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );

	enable = (type >= kSplitByAmount_testType_firstN);
	EnableWindow( GetDlgItem( hWnd, IDC_FIRSTNTEXT ), enable );
	EnableWindow( GetDlgItem( hWnd, IDC_PERSOURCE ), enable );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_FIRSTNSPIN ) );
	spin->Enable( enable );
	ReleaseISpinner( spin );

	EnableWindow( GetDlgItem( hWnd, IDC_UNIQUENESSBOX ), bRandom );
	EnableWindow( GetDlgItem( hWnd, IDC_SEEDTEXT ), bRandom );
	spin = GetISpinner( GetDlgItem( hWnd, IDC_SEEDSPIN ) );
	spin->Enable( bRandom );
	ReleaseISpinner( spin );
	ICustButton* button = GetICustButton( GetDlgItem( hWnd, IDC_NEW ) );
	button->Enable( bRandom );
	ReleaseICustButton( button );
}

开发者ID:DimondTheCat，项目名称:xray，代码行数:31，代码来源:PFTestSplitByAmount_ParamBlock.cpp

示例11: GetISpinner

void RendSplineParamsMapDlgProc::Initialize(HWND hWnd, TimeValue t)
{
	if (hWnd == NULL) return;
	else
	{
		ISpinnerControl *iSpin = GetISpinner(GetDlgItem(hWnd, IDC_ASPECTSPIN));
		iSpin->LinkToEdit(GetDlgItem(hWnd, IDC_ASPECT), EDITTYPE_FLOAT);
		iSpin->SetLimits(0.0f,99999999.0f);
		iSpin->SetAutoScale(TRUE);
		ReleaseISpinner(iSpin);

		if (RendSpline::hLockButton == NULL) {
			HBITMAP hBitmap, hMask;
			RendSpline::hLockButton = ImageList_Create(16, 15, TRUE, 2, 0);
			hBitmap = LoadBitmap(RendSplineDesc.HInstance(), MAKEINTRESOURCE(IDB_LOCK));
			hMask   = LoadBitmap(RendSplineDesc.HInstance(), MAKEINTRESOURCE(IDB_LOCKMASK));
			ImageList_Add(RendSpline::hLockButton,hBitmap,hMask);
			DeleteObject(hBitmap);
			DeleteObject(hMask);
		}

		ICustButton *lockAspect = GetICustButton(GetDlgItem(hWnd,IDC_ASPECTLOCK));
		lockAspect->SetImage(RendSpline::hLockButton,0,0,1,1,16,15);
		lockAspect->SetType(CBT_CHECK);
		ReleaseICustButton(lockAspect);

		CheckRadioButton(hWnd, IDC_VIEWPORT, IDC_RENDERER, IDC_RENDERER);

        BOOL usePhysUVs = mod->GetUsePhysicalScaleUVs();
        CheckDlgButton(hWnd, IDC_REAL_WORLD_MAP_SIZE, usePhysUVs);
	}

}

开发者ID:innovatelogic，项目名称:ilogic-vm，代码行数:33，代码来源:rendspline.cpp

示例12: switch

INT_PTR BerconWoodDlgProc::DlgProc(TimeValue t,IParamMap2 *map,HWND hWnd,UINT msg,WPARAM wParam,LPARAM lParam)	{	
	switch (msg) {
		case WM_INITDIALOG:	{			
			// Lock buttons
			ICustButton* custButton = GetICustButton(GetDlgItem(hWnd, IDC_LOCK_GRAIN));
			custButton->SetText(_T("L"));
			ReleaseICustButton(custButton); 

			// Wood type
			HWND hwndMap = GetDlgItem(hWnd, IDC_WOOD_TYPE);  
			SendMessage(hwndMap, CB_ADDSTRING, 0, (LPARAM)GetString(IDS_RADIAL_WOOD));
			SendMessage(hwndMap, CB_ADDSTRING, 0, (LPARAM)GetString(IDS_PERLIN_WOOD));
			SendMessage(hwndMap, CB_ADDSTRING, 0, (LPARAM)GetString(IDS_SIMPLEX_WOOD));
			SendMessage(hwndMap, CB_ADDSTRING, 0, (LPARAM)GetString(IDS_LINEAR_WOOD));

			// Set correct dropdown value
			int curIndex;
			map->GetParamBlock()->GetValue(wood_type, t, curIndex, FOREVER);
			SendMessage(GetDlgItem(hWnd, IDC_WOOD_TYPE), CB_SETCURSEL, (WPARAM)curIndex, 0);						
			break;
		}		
		case WM_SHOWWINDOW:	{		
			// Set correct dropdown value
			int curIndex;
			map->GetParamBlock()->GetValue(wood_type, t, curIndex, FOREVER);
			SendMessage(GetDlgItem(hWnd, IDC_WOOD_TYPE), CB_SETCURSEL, (WPARAM)curIndex, 0);
			break;
		}
		default: return FALSE;
	}
	return TRUE;
}

开发者ID:GeorgeR，项目名称:BerconMaps，代码行数:32，代码来源:BerconWood.cpp

示例13: SetupPadLockButton

void SetupPadLockButton(HWND hWnd,int id, BOOL check) {
   ICustButton *iBut;
   iBut = GetICustButton(GetDlgItem(hWnd,id));
   iBut->SetImage(hLockButtons,2,2,2,2,16,15);
   iBut->SetType(CBT_CHECK);
   ReleaseICustButton(iBut);
   }

开发者ID:Anchoys1，项目名称:max_nif_plugin，代码行数:7，代码来源:shaderutil.cpp

示例14: TurnButton

void TurnButton(HWND hWnd,int SpinNum,BOOL ison)
{	ICustButton *iBut;
	iBut=GetICustButton(GetDlgItem(hWnd,SpinNum));
	if (iBut) 
	{	if (ison) iBut->Enable(); else iBut->Disable();}
	ReleaseICustButton(iBut);
}

开发者ID:DimondTheCat，项目名称:xray，代码行数:7，代码来源:dynw.cpp

示例15: CheckButton

void CheckButton(HWND hWnd,int id, BOOL check) {
   ICustButton *iBut;
   iBut = GetICustButton(GetDlgItem(hWnd,id));
   if( iBut )
      iBut->SetCheck(check);
   ReleaseICustButton(iBut);
   }

开发者ID:Anchoys1，项目名称:max_nif_plugin，代码行数:7，代码来源:shaderutil.cpp

示例16: GetICustButton

void 
CppOut::Init(HWND hWnd)
{
    iPick = GetICustButton(GetDlgItem(hWnd,IDC_CPPOUT_PICK));
    iPick->SetType(CBT_CHECK);
    iPick->SetHighlightColor(GREEN_WASH);
}

开发者ID:2asoft，项目名称:xray，代码行数:7，代码来源:cppout.cpp

示例17: GetICustButton

void EditPatchMod::SetSelDlgEnables() 
{
	if (!hSelectPanel)
		return;
	ICustButton *but = GetICustButton(GetDlgItem(hSelectPanel, IDC_NS_PASTE));
	but->Disable();
	switch (GetSubobjectLevel())
	{
		case PO_VERTEX:
			if (GetPatchNamedSelClip(CLIP_P_VERT))
				but->Enable();
			break;
		case PO_EDGE:
			if (GetPatchNamedSelClip(CLIP_P_EDGE))
				but->Enable();
			break;
		case PO_PATCH:
			if (GetPatchNamedSelClip(CLIP_P_PATCH))
				but->Enable();
			break;
		case PO_TILE:
			break;
		}
	ReleaseICustButton(but);
	}

开发者ID:sythaeryn，项目名称:pndrpg，代码行数:25，代码来源:np_epm_selection.cpp

示例18: IsButtonEnabled

// Helper method
static BOOL IsButtonEnabled(HWND hParent, DWORD id) {
	if( hParent==NULL ) return FALSE;
	ICustButton* but = GetICustButton(GetDlgItem(hParent,id));
	BOOL retval = but->IsEnabled();
	ReleaseICustButton(but);
	return retval;
}

开发者ID:artemeliy，项目名称:inf4715，代码行数:8，代码来源:EditPolyPaint.cpp

示例19: GetICustButton

void PFOperatorInstanceShapeDlgProc::UpdateObjectNameDlg( HWND hWnd, TSTR& objectName )
{
	ICustButton* but;
	but = GetICustButton( GetDlgItem( hWnd, IDC_PICK ) );
	but->SetText(objectName);
	ReleaseICustButton(but);
}

开发者ID:artemeliy，项目名称:inf4715，代码行数:7，代码来源:PFOperatorInstanceShape_ParamBlock.cpp

示例20: EnterMode

void SWrapPickOperand::EnterMode(IObjParam *ip)
	{
	ICustButton *iBut;
	iBut=GetICustButton(GetDlgItem(po->hParams,IDC_AP_WRAPBUTTON));
	if (iBut) iBut->SetCheck(TRUE);
	ReleaseICustButton(iBut);
	GetCOREInterface()->PushPrompt(GetString(IDS_AP_PICKMODE));
	}

开发者ID:2asoft，项目名称:xray，代码行数:8，代码来源:surfwrap.cpp

注：本文中的GetICustButton函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetIP函数代码示例发布时间：2022-05-30

C++ GetI18NCategory函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19200|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9989|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8328|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8697|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8640|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9659|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8625|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8000|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8657|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7536|2022-11-06

客服电话

电子邮件

C++ GetICustButton函数代码示例

示例1: switch

示例2: LOWORD

示例3: Update

示例4: SetWindowText

示例5: GetICustButton

示例6: LOWORD

示例7: Set

示例8: switch

示例9: GetICustButton

示例10: EnableWindow

示例11: GetISpinner

示例12: switch

示例13: SetupPadLockButton

示例14: TurnButton

示例15: CheckButton

示例16: GetICustButton

示例17: GetICustButton

示例18: IsButtonEnabled

示例19: GetICustButton

示例20: EnterMode

请发表评论

全部评论

上一篇：

下一篇：

nirenr/AndroLua_pro: Lua5.3.3 for androi

samhitha1/demo: Sample for ANT/Maven Scr

geb/geb-example-maven

senryulearning/MastodonWikiSenryu

rstropek/pandoc-latex: Extended version

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053