• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ GetFirstGuidHob函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GetFirstGuidHob函数的典型用法代码示例。如果您正苦于以下问题:C++ GetFirstGuidHob函数的具体用法?C++ GetFirstGuidHob怎么用?C++ GetFirstGuidHob使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GetFirstGuidHob函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: S3EndOfPeiNotify

/**
  This function handles S3 resume task at the end of PEI

  @param[in] PeiServices    Pointer to PEI Services Table.
  @param[in] NotifyDesc     Pointer to the descriptor for the Notification event that
                            caused this function to execute.
  @param[in] Ppi            Pointer to the PPI data associated with this function.

  @retval EFI_STATUS        Always return EFI_SUCCESS
**/
EFI_STATUS
EFIAPI
S3EndOfPeiNotify(
  IN EFI_PEI_SERVICES          **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
  IN VOID                      *Ppi
  )
{
  VOID                        *Hob;
  VTD_INFO                    *VTdInfo;
  UINT64                      EngineMask;

  DEBUG((DEBUG_INFO, "VTdPmr S3EndOfPeiNotify\n"));

  if ((PcdGet8(PcdVTdPolicyPropertyMask) & BIT1) == 0) {
    Hob = GetFirstGuidHob (&mVTdInfoGuid);
    if (Hob == NULL) {
      return EFI_SUCCESS;
    }
    VTdInfo = GET_GUID_HOB_DATA(Hob);

    EngineMask = LShiftU64 (1, VTdInfo->VTdEngineCount) - 1;
    DisableDmaProtection (VTdInfo, EngineMask);
  }
  return EFI_SUCCESS;
}
开发者ID:mdaniel,项目名称:virtualbox-org-svn-vbox-trunk,代码行数:36,代码来源:IntelVTdPmrPei.c


示例2: InitVTdPmrForDma

/**
  Initializes the Intel VTd PMR for DMA buffer.

  @retval EFI_SUCCESS            Usb bot driver is successfully initialized.
  @retval EFI_OUT_OF_RESOURCES   Can't initialize the driver.

**/
EFI_STATUS
InitVTdPmrForDma (
  VOID
  )
{
  EFI_STATUS                  Status;
  VOID                        *Hob;
  VTD_INFO                    *VTdInfo;

  Hob = GetFirstGuidHob (&mVTdInfoGuid);
  VTdInfo = GET_GUID_HOB_DATA(Hob);

  //
  // If there is RMRR memory, parse it here.
  //
  ParseDmarAcpiTableRmrr (VTdInfo);

  //
  // Allocate a range in PEI memory as DMA buffer
  // Mark others to be DMA protected.
  //
  Status = InitDmaProtection (VTdInfo);

  return Status;
}
开发者ID:mdaniel,项目名称:virtualbox-org-svn-vbox-trunk,代码行数:32,代码来源:IntelVTdPmrPei.c


示例3: InitVTdPmrForAll

/**
  Initializes the Intel VTd PMR for all memory.

  @retval EFI_SUCCESS            Usb bot driver is successfully initialized.
  @retval EFI_OUT_OF_RESOURCES   Can't initialize the driver.

**/
EFI_STATUS
InitVTdPmrForAll (
  VOID
  )
{
  EFI_STATUS                  Status;
  VOID                        *Hob;
  VTD_INFO                    *VTdInfo;
  UINTN                       LowBottom;
  UINTN                       LowTop;
  UINTN                       HighBottom;
  UINT64                      HighTop;

  Hob = GetFirstGuidHob (&mVTdInfoGuid);
  VTdInfo = GET_GUID_HOB_DATA(Hob);

  LowBottom = 0;
  LowTop = 0;
  HighBottom = 0;
  HighTop = LShiftU64 (1, VTdInfo->HostAddressWidth + 1);

  Status = SetDmaProtectedRange (
             VTdInfo,
             VTdInfo->EngineMask,
             (UINT32)LowBottom,
             (UINT32)(LowTop - LowBottom),
             HighBottom,
             HighTop - HighBottom
             );

  return Status;
}
开发者ID:mdaniel,项目名称:virtualbox-org-svn-vbox-trunk,代码行数:39,代码来源:IntelVTdPmrPei.c


示例4: AllocateBuffer

/**
  Frees memory that was allocated with AllocateBuffer().

  @param  This                  The PPI instance pointer.
  @param  Pages                 The number of pages to free.
  @param  HostAddress           The base system memory address of the allocated range.

  @retval EFI_SUCCESS           The requested memory pages were freed.
  @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
                                was not allocated with AllocateBuffer().
  @retval EFI_NOT_AVAILABLE_YET DMA protection has been enabled, but DMA buffer are
                                not available to be allocated yet.

**/
EFI_STATUS
EFIAPI
PeiIoMmuFreeBuffer (
  IN  EDKII_IOMMU_PPI                          *This,
  IN  UINTN                                    Pages,
  IN  VOID                                     *HostAddress
  )
{
  UINTN                       Length;
  VOID                        *Hob;
  DMA_BUFFER_INFO             *DmaBufferInfo;

  Hob = GetFirstGuidHob (&mDmaBufferInfoGuid);
  DmaBufferInfo = GET_GUID_HOB_DATA(Hob);

  DEBUG ((DEBUG_VERBOSE, "PeiIoMmuFreeBuffer - page - %x, HostAddr - %x\n", Pages, HostAddress));
  DEBUG ((DEBUG_VERBOSE, "  DmaBufferCurrentTop - %x\n", DmaBufferInfo->DmaBufferCurrentTop));
  DEBUG ((DEBUG_VERBOSE, "  DmaBufferCurrentBottom - %x\n", DmaBufferInfo->DmaBufferCurrentBottom));

  if (DmaBufferInfo->DmaBufferCurrentTop == 0) {
    return EFI_NOT_AVAILABLE_YET;
  }

  Length = EFI_PAGES_TO_SIZE(Pages);
  if ((UINTN)HostAddress == DmaBufferInfo->DmaBufferCurrentTop) {
    DmaBufferInfo->DmaBufferCurrentTop += Length;
  }

  return EFI_SUCCESS;
}
开发者ID:mdaniel,项目名称:virtualbox-org-svn-vbox-trunk,代码行数:44,代码来源:IntelVTdPmrPei.c


示例5: PeiInitPlatform

/**
  This is the entrypoint of PEIM
  
  @param  FileHandle  Handle of the file being invoked.
  @param  PeiServices Describes the list of possible PEI Services.

  @retval EFI_SUCCESS if it completed successfully.  
**/
EFI_STATUS
EFIAPI
PeiInitPlatform (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  EFI_STATUS                              Status;
  EFI_BOOT_MODE                           BootMode;
  EFI_PEI_STALL_PPI                       *StallPpi;
  EFI_PEI_PPI_DESCRIPTOR                  *StallPeiPpiDescriptor;   
  EFI_FV_FILE_INFO                        FileInfo;
  EFI_PLATFORM_INFO                       *PlatformInfo;
  EFI_HOB_GUID_TYPE                       *GuidHob;
  EFI_PLATFORM_TYPE                       PlatformType;

  GuidHob = GetFirstGuidHob (&gEfiPlatformInfoGuid);
  PlatformInfo  = GET_GUID_HOB_DATA (GuidHob);
  ASSERT (PlatformInfo != NULL);
  PlatformType = (EFI_PLATFORM_TYPE) PlatformInfo->Type;

  //
  // Initialize Firmware Volume security.
  // This must be done before any firmware volume accesses (excl. BFV)
  //
  Status = PeiInitializeFvSecurity();
  ASSERT_EFI_ERROR (Status);

  //
  // Allocate an initial buffer from heap for debugger use
  //
  DEBUG_CODE (
    BpeDsAllocation ();
  );
开发者ID:RafaelRMachado,项目名称:Galileo,代码行数:42,代码来源:PlatformEarlyInit.c


示例6: GetBistFromHob

/**
  Worker function to parse CPU BIST information from Guided HOB.

  @param[out] StructureSize     Pointer to the variable describing size of the input buffer.
  @param[out] StructureBuffer   Pointer to the buffer save CPU BIST information.

  @retval EFI_SUCCESS           The data was successfully returned.
  @retval EFI_BUFFER_TOO_SMALL  The buffer was too small.

**/
EFI_STATUS
GetBistFromHob (
  IN OUT UINT64           *StructureSize,
  IN OUT VOID             *StructureBuffer
  )
{
  EFI_HOB_GUID_TYPE       *GuidHob;
  VOID                    *DataInHob;
  UINTN                   DataSize;

  GuidHob = GetFirstGuidHob (&gEfiCallerIdGuid);
  if (GuidHob == NULL) {
    *StructureSize = 0;
    return EFI_SUCCESS;
  }

  DataInHob = GET_GUID_HOB_DATA (GuidHob);
  DataSize  = GET_GUID_HOB_DATA_SIZE (GuidHob);

  //
  // return the information from BistHob
  //
  if ((*StructureSize) < (UINT64) DataSize) {
    *StructureSize = (UINT64) DataSize;
    return EFI_BUFFER_TOO_SMALL;
  }

  *StructureSize = (UINT64) DataSize;
  CopyMem (StructureBuffer, DataInHob, DataSize);
  return EFI_SUCCESS;
}
开发者ID:EvanLloyd,项目名称:tianocore,代码行数:41,代码来源:SecBist.c


示例7: GetXenSmbiosTables

/**
  Locates the Xen SMBIOS data if it exists

  @return SMBIOS_TABLE_ENTRY_POINT   Address of Xen SMBIOS data

**/
SMBIOS_TABLE_ENTRY_POINT *
GetXenSmbiosTables (
  VOID
  )
{
  UINT8                     *XenSmbiosPtr;
  SMBIOS_TABLE_ENTRY_POINT  *XenSmbiosEntryPointStructure;
  EFI_HOB_GUID_TYPE         *GuidHob;

  //
  // See if a XenInfo HOB is available
  //
  GuidHob = GetFirstGuidHob (&gEfiXenInfoGuid);
  if (GuidHob == NULL) {
    return NULL;
  }

  for (XenSmbiosPtr = (UINT8*)(UINTN) XEN_SMBIOS_PHYSICAL_ADDRESS;
       XenSmbiosPtr < (UINT8*)(UINTN) XEN_SMBIOS_PHYSICAL_END;
       XenSmbiosPtr += 0x10) {

    XenSmbiosEntryPointStructure = (SMBIOS_TABLE_ENTRY_POINT *) XenSmbiosPtr;

    if (!AsciiStrnCmp ((CHAR8 *) XenSmbiosEntryPointStructure->AnchorString, "_SM_", 4) &&
        !AsciiStrnCmp ((CHAR8 *) XenSmbiosEntryPointStructure->IntermediateAnchorString, "_DMI_", 5) &&
        IsEntryPointStructureValid (XenSmbiosEntryPointStructure)) {

      return XenSmbiosEntryPointStructure;

    }
  }

  return NULL;
}
开发者ID:EvanLloyd,项目名称:tianocore,代码行数:40,代码来源:X86Xen.c


示例8: InitCommunicationContext

/**
  Init SMM communication context.
**/
VOID
InitCommunicationContext (
  VOID
  )
{
  EFI_SMRAM_DESCRIPTOR                          *SmramDescriptor;
  SMM_S3_RESUME_STATE                           *SmmS3ResumeState;
  VOID                                          *GuidHob;
  EFI_SMM_COMMUNICATION_CONTEXT                 *SmmCommunicationContext;

  GuidHob = GetFirstGuidHob (&gEfiAcpiVariableGuid);
  ASSERT (GuidHob != NULL);
  SmramDescriptor = (EFI_SMRAM_DESCRIPTOR *) GET_GUID_HOB_DATA (GuidHob);
  SmmS3ResumeState = (SMM_S3_RESUME_STATE *)(UINTN)SmramDescriptor->CpuStart;

  DEBUG ((EFI_D_INFO, "InitCommunicationContext - SmmS3ResumeState: %x\n", SmmS3ResumeState));
  DEBUG ((EFI_D_INFO, "InitCommunicationContext - Smst: %x\n", SmmS3ResumeState->Smst));
  
  SmmCommunicationContext = (EFI_SMM_COMMUNICATION_CONTEXT *)InternalSmstGetVendorTableByGuid (
                                                               SmmS3ResumeState->Signature,
                                                               (EFI_SMM_SYSTEM_TABLE2 *)(UINTN)SmmS3ResumeState->Smst,
                                                               &gEfiPeiSmmCommunicationPpiGuid
                                                               );
  ASSERT (SmmCommunicationContext != NULL);

  SetCommunicationContext (SmmCommunicationContext);

  return ;
}
开发者ID:01org,项目名称:Galileo-Runtime,代码行数:32,代码来源:PiSmmCommunicationPei.c


示例9: ReportStatusCode

/**
  Remove a previously registered callback function from the notification list.

  ReportStatusCode() messages will no longer be forwarded to the Callback function.

  @param[in] Callback           A pointer to a function of type EFI_PEI_RSC_HANDLER_CALLBACK that is to be
                                unregistered.

  @retval EFI_SUCCESS           The function was successfully unregistered.
  @retval EFI_INVALID_PARAMETER The callback function was NULL.
  @retval EFI_NOT_FOUND         The callback function was not found to be unregistered.

**/
EFI_STATUS
EFIAPI
Unregister (
  IN EFI_PEI_RSC_HANDLER_CALLBACK Callback
  )
{
  EFI_PEI_HOB_POINTERS            Hob;
  EFI_PEI_RSC_HANDLER_CALLBACK    *CallbackEntry;
  UINTN                           *NumberOfEntries;
  UINTN                           Index;

  if (Callback == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  Hob.Raw  = GetFirstGuidHob (&gStatusCodeCallbackGuid);
  while (Hob.Raw != NULL) {
    NumberOfEntries = GET_GUID_HOB_DATA (Hob);
    CallbackEntry   = (EFI_PEI_RSC_HANDLER_CALLBACK *) (NumberOfEntries + 1);
    for (Index = 0; Index < *NumberOfEntries; Index++) {
      if (CallbackEntry[Index] == Callback) {
        //
        // Set removed entry as NULL.
        //
        CallbackEntry[Index] = NULL;
        return EFI_SUCCESS;
      }
    }
    Hob.Raw = GET_NEXT_HOB (Hob);
    Hob.Raw = GetNextGuidHob (&gStatusCodeCallbackGuid, Hob.Raw);
  }

  return EFI_NOT_FOUND;
}
开发者ID:bhanug,项目名称:virtualbox,代码行数:47,代码来源:ReportStatusCodeRouterPei.c


示例10: SecPlatformInformation2

/**
  Implementation of the PlatformInformation2 service in EFI_SEC_PLATFORM_INFORMATION2_PPI.

  @param  PeiServices                The pointer to the PEI Services Table.
  @param  StructureSize              The pointer to the variable describing size of the input buffer.
  @param  PlatformInformationRecord2 The pointer to the EFI_SEC_PLATFORM_INFORMATION_RECORD2.

  @retval EFI_SUCCESS                The data was successfully returned.
  @retval EFI_BUFFER_TOO_SMALL       The buffer was too small. The current buffer size needed to
                                     hold the record is returned in StructureSize.

**/
EFI_STATUS
EFIAPI
SecPlatformInformation2 (
  IN CONST EFI_PEI_SERVICES                   **PeiServices,
  IN OUT UINT64                               *StructureSize,
     OUT EFI_SEC_PLATFORM_INFORMATION_RECORD2 *PlatformInformationRecord2
  )
{
  EFI_HOB_GUID_TYPE       *GuidHob;
  VOID                    *DataInHob;
  UINTN                   DataSize;

  GuidHob = GetFirstGuidHob (&gEfiSecPlatformInformation2PpiGuid);
  if (GuidHob == NULL) {
    *StructureSize = 0;
    return EFI_SUCCESS;
  }

  DataInHob = GET_GUID_HOB_DATA (GuidHob);
  DataSize  = GET_GUID_HOB_DATA_SIZE (GuidHob);

  //
  // return the information from BistHob
  //
  if ((*StructureSize) < (UINT64) DataSize) {
    *StructureSize = (UINT64) DataSize;
    return EFI_BUFFER_TOO_SMALL;
  }

  *StructureSize = (UINT64) DataSize;
  CopyMem (PlatformInformationRecord2, DataInHob, DataSize);
  return EFI_SUCCESS;
}
开发者ID:mdaniel,项目名称:virtualbox-org-svn-vbox-trunk,代码行数:45,代码来源:CpuBist.c


示例11: InitializePnvDxe

//
// Initialization
//
EFI_STATUS
EFIAPI
InitializePnvDxe (
  IN EFI_HANDLE           ImageHandle,
  IN EFI_SYSTEM_TABLE     *SystemTable
  )
{
  VOID                           *Hob;
  VOID                           *DeviceTreeBase;
  EFI_STATUS                     Status;
  //
  // Recover the DeviceTree HOB and install it in the configuration table
  //
  Hob = GetFirstGuidHob(&gFdtHobGuid);
  if (Hob == NULL || GET_GUID_HOB_DATA_SIZE (Hob) != sizeof (UINT64)) {
    DEBUG ((EFI_D_ERROR, "%a: No FDT HOB found\n", __FUNCTION__));
    return EFI_NOT_FOUND;
  }
  DeviceTreeBase = (VOID *)(UINTN)*(UINT64 *)GET_GUID_HOB_DATA (Hob);

  if (fdt_check_header (DeviceTreeBase) != 0) {
    DEBUG ((EFI_D_ERROR, "%a: DTB Invalid @ 0x%p\n", __FUNCTION__, DeviceTreeBase));
    return EFI_NOT_FOUND;
  }

  Status = gBS->InstallConfigurationTable (&gFdtTableGuid, DeviceTreeBase);
  ASSERT_EFI_ERROR (Status);
  
  DEBUG ((EFI_D_INFO, "%a: DTB @ 0x%p\n", __FUNCTION__, DeviceTreeBase));

  return EFI_SUCCESS;
}
开发者ID:ozbenh,项目名称:edk2,代码行数:35,代码来源:PnvDxe.c


示例12: GetCpuFeaturesData

/**
  Worker function to get CPU_FEATURES_DATA pointer.

  @return Pointer to CPU_FEATURES_DATA.
**/
CPU_FEATURES_DATA *
GetCpuFeaturesData (
  VOID
  )
{
  CPU_FEATURES_DATA       *CpuInitData;
  EFI_HOB_GUID_TYPE       *GuidHob;
  VOID                    *DataInHob;
  UINT64                  Data64;

  CpuInitData = NULL;
  GuidHob = GetFirstGuidHob (&mRegisterCpuFeaturesHobGuid);
  if (GuidHob != NULL) {
    DataInHob = GET_GUID_HOB_DATA (GuidHob);
    CpuInitData = (CPU_FEATURES_DATA *) (*(UINTN *) DataInHob);
    ASSERT (CpuInitData != NULL);
  } else {
    CpuInitData = AllocateZeroPool (sizeof (CPU_FEATURES_DATA));
    ASSERT (CpuInitData != NULL);
    //
    // Build location of CPU MP DATA buffer in HOB
    //
    Data64 = (UINT64) (UINTN) CpuInitData;
    BuildGuidDataHob (
      &mRegisterCpuFeaturesHobGuid,
      (VOID *) &Data64,
      sizeof (UINT64)
      );
  }

  return CpuInitData;
}
开发者ID:b-man,项目名称:edk2,代码行数:37,代码来源:PeiRegisterCpuFeaturesLib.c


示例13: InternalGetPeiPerformance

/**
  Dumps all the PEI performance log to DXE performance gauge array.

  This internal function dumps all the PEI performance log to the DXE performance gauge array.
  It retrieves the optional GUID HOB for PEI performance and then saves the performance data
  to DXE performance data structures.

**/
VOID
InternalGetPeiPerformance (
  VOID
  )
{
  EFI_HOB_GUID_TYPE                 *GuidHob;
  PEI_PERFORMANCE_LOG_HEADER        *LogHob;
  PEI_PERFORMANCE_LOG_ENTRY         *LogEntryArray;
  UINT32                            *LogIdArray;
  GAUGE_DATA_ENTRY_EX               *GaugeEntryExArray;
  UINT32                            Index;
  UINT32                            NumberOfEntries;

  NumberOfEntries = 0;
  GaugeEntryExArray = (GAUGE_DATA_ENTRY_EX *) (mGaugeData + 1);

  //
  // Dump PEI Log Entries to DXE Guage Data structure.
  //
  GuidHob = GetFirstGuidHob (&gPerformanceProtocolGuid);
  if (GuidHob != NULL) {
    LogHob          = GET_GUID_HOB_DATA (GuidHob);
    LogEntryArray   = (PEI_PERFORMANCE_LOG_ENTRY *) (LogHob + 1);

    NumberOfEntries = LogHob->NumberOfEntries;
    for (Index = 0; Index < NumberOfEntries; Index++) {
      GaugeEntryExArray[Index].Handle         = LogEntryArray[Index].Handle;
      AsciiStrCpyS (GaugeEntryExArray[Index].Token,  DXE_PERFORMANCE_STRING_SIZE, LogEntryArray[Index].Token);
      AsciiStrCpyS (GaugeEntryExArray[Index].Module, DXE_PERFORMANCE_STRING_SIZE, LogEntryArray[Index].Module);
      GaugeEntryExArray[Index].StartTimeStamp = LogEntryArray[Index].StartTimeStamp;
      GaugeEntryExArray[Index].EndTimeStamp   = LogEntryArray[Index].EndTimeStamp;
      GaugeEntryExArray[Index].Identifier     = 0;
    }

    GuidHob = GetFirstGuidHob (&gPerformanceExProtocolGuid);
    if (GuidHob != NULL) {
      LogIdArray    = GET_GUID_HOB_DATA (GuidHob);
      for (Index = 0; Index < NumberOfEntries; Index++) {
        GaugeEntryExArray[Index].Identifier   = LogIdArray[Index];
      }
    }
  }
  mGaugeData->NumberOfEntries = NumberOfEntries;
}
开发者ID:andyvand,项目名称:edk2,代码行数:52,代码来源:DxeCorePerformanceLib.c


示例14: GetPciExpressBaseAddressForRootBridge

UINT64
GetPciExpressBaseAddressForRootBridge (
  IN UINTN    HostBridgeNumber,
  IN UINTN    RootBridgeNumber
  )
/*++

Routine Description:
  This routine is to get PciExpress Base Address for this RootBridge

Arguments:
  HostBridgeNumber - The number of HostBridge
  RootBridgeNumber - The number of RootBridge
    
Returns:
  UINT64 - PciExpressBaseAddress for this HostBridge and RootBridge

--*/
{
  EFI_PCI_EXPRESS_BASE_ADDRESS_INFORMATION *PciExpressBaseAddressInfo;
  UINTN                                    BufferSize;
  UINT32                                   Index;
  UINT32                                   Number;
  EFI_PEI_HOB_POINTERS                     GuidHob;

  //
  // Get PciExpressAddressInfo Hob
  //
  PciExpressBaseAddressInfo = NULL;
  BufferSize                = 0;
  GuidHob.Raw = GetFirstGuidHob (&gEfiPciExpressBaseAddressGuid);
  if (GuidHob.Raw != NULL) {
    PciExpressBaseAddressInfo = GET_GUID_HOB_DATA (GuidHob.Guid);
    BufferSize                = GET_GUID_HOB_DATA_SIZE (GuidHob.Guid);
  } else {
    return 0;
  }

  //
  // Search the PciExpress Base Address in the Hob for current RootBridge
  //
  Number = (UINT32)(BufferSize / sizeof(EFI_PCI_EXPRESS_BASE_ADDRESS_INFORMATION));
  for (Index = 0; Index < Number; Index++) {
    if ((PciExpressBaseAddressInfo[Index].HostBridgeNumber == HostBridgeNumber) &&
        (PciExpressBaseAddressInfo[Index].RootBridgeNumber == RootBridgeNumber)) {
      return PciExpressBaseAddressInfo[Index].PciExpressBaseAddress;
    }
  }

  //
  // Do not find the PciExpress Base Address in the Hob
  //
  return 0;
}
开发者ID:Clover-EFI-Bootloader,项目名称:clover,代码行数:54,代码来源:PcatPciRootBridge.c


示例15: InternalGetPerformanceHobLog

/**
  Gets the GUID HOB for PEI performance.

  This internal function searches for the GUID HOB for PEI performance.
  If that GUID HOB is not found, it will build a new one.
  It outputs the data area of that GUID HOB to record performance log.

  @param    PeiPerformanceLog           Pointer to Pointer to PEI performance log header.
  @param    PeiPerformanceIdArray       Pointer to Pointer to PEI performance identifier array.

**/
VOID
InternalGetPerformanceHobLog (
  OUT PEI_PERFORMANCE_LOG_HEADER    **PeiPerformanceLog,
  OUT UINT32                        **PeiPerformanceIdArray
  )
{
  EFI_HOB_GUID_TYPE           *GuidHob;
  UINTN                       PeiPerformanceSize;
  UINT16                      PeiPerformanceLogEntries;

  ASSERT (PeiPerformanceLog != NULL);
  ASSERT (PeiPerformanceIdArray != NULL);

  PeiPerformanceLogEntries = (UINT16) (PcdGet16 (PcdMaxPeiPerformanceLogEntries16) != 0 ?
                                       PcdGet16 (PcdMaxPeiPerformanceLogEntries16) :
                                       PcdGet8 (PcdMaxPeiPerformanceLogEntries));
  GuidHob = GetFirstGuidHob (&gPerformanceProtocolGuid);

  if (GuidHob != NULL) {
    //
    // PEI Performance HOB was found, then return the existing one.
    //
    *PeiPerformanceLog = GET_GUID_HOB_DATA (GuidHob);

    GuidHob = GetFirstGuidHob (&gPerformanceExProtocolGuid);
    ASSERT (GuidHob != NULL);
    *PeiPerformanceIdArray = GET_GUID_HOB_DATA (GuidHob);
  } else {
    //
    // PEI Performance HOB was not found, then build one.
    //
    PeiPerformanceSize     = sizeof (PEI_PERFORMANCE_LOG_HEADER) +
                             sizeof (PEI_PERFORMANCE_LOG_ENTRY) * PeiPerformanceLogEntries;
    *PeiPerformanceLog     = BuildGuidHob (&gPerformanceProtocolGuid, PeiPerformanceSize);
    *PeiPerformanceLog     = ZeroMem (*PeiPerformanceLog, PeiPerformanceSize);

    PeiPerformanceSize     = sizeof (UINT32) * PeiPerformanceLogEntries;
    *PeiPerformanceIdArray = BuildGuidHob (&gPerformanceExProtocolGuid, PeiPerformanceSize);
    *PeiPerformanceIdArray = ZeroMem (*PeiPerformanceIdArray, PeiPerformanceSize);
  }
}
开发者ID:M1cha,项目名称:edk2,代码行数:52,代码来源:PeiPerformanceLib.c


示例16: Map

/**
  Completes the Map() operation and releases any corresponding resources.

  @param  This                  The PPI instance pointer.
  @param  Mapping               The mapping value returned from Map().

  @retval EFI_SUCCESS           The range was unmapped.
  @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
  @retval EFI_DEVICE_ERROR      The data was not committed to the target system memory.
  @retval EFI_NOT_AVAILABLE_YET DMA protection has been enabled, but DMA buffer are
                                not available to be allocated yet.

**/
EFI_STATUS
EFIAPI
PeiIoMmuUnmap (
  IN  EDKII_IOMMU_PPI                          *This,
  IN  VOID                                     *Mapping
  )
{
  MAP_INFO                    *MapInfo;
  UINTN                       Length;
  VOID                        *Hob;
  DMA_BUFFER_INFO             *DmaBufferInfo;

  Hob = GetFirstGuidHob (&mDmaBufferInfoGuid);
  DmaBufferInfo = GET_GUID_HOB_DATA(Hob);

  DEBUG ((DEBUG_VERBOSE, "PeiIoMmuUnmap - Mapping - %x\n", Mapping));
  DEBUG ((DEBUG_VERBOSE, "  DmaBufferCurrentTop - %x\n", DmaBufferInfo->DmaBufferCurrentTop));
  DEBUG ((DEBUG_VERBOSE, "  DmaBufferCurrentBottom - %x\n", DmaBufferInfo->DmaBufferCurrentBottom));

  if (DmaBufferInfo->DmaBufferCurrentTop == 0) {
    return EFI_NOT_AVAILABLE_YET;
  }

  if (Mapping == NULL) {
    return EFI_SUCCESS;
  }

  MapInfo = Mapping;
  ASSERT (MapInfo->Signature == MAP_INFO_SIGNATURE);
  DEBUG ((DEBUG_VERBOSE, "  Op(%x):DeviceAddress - %x, NumberOfBytes - %x\n", MapInfo->Operation, (UINTN)MapInfo->DeviceAddress, MapInfo->NumberOfBytes));

  //
  // If this is a write operation from the Bus Master's point of view,
  // then copy the contents of the mapped buffer into the real buffer
  // so the processor can read the contents of the real buffer.
  //
  if (MapInfo->Operation == EdkiiIoMmuOperationBusMasterWrite ||
      MapInfo->Operation == EdkiiIoMmuOperationBusMasterWrite64) {
    CopyMem (
      (VOID *) (UINTN) MapInfo->HostAddress,
      (VOID *) (UINTN) MapInfo->DeviceAddress,
      MapInfo->NumberOfBytes
      );
  }

  Length = MapInfo->NumberOfBytes + sizeof(MAP_INFO);
  if (DmaBufferInfo->DmaBufferCurrentBottom == MapInfo->DeviceAddress + Length) {
    DmaBufferInfo->DmaBufferCurrentBottom -= Length;
  }

  return EFI_SUCCESS;
}
开发者ID:mdaniel,项目名称:virtualbox-org-svn-vbox-trunk,代码行数:65,代码来源:IntelVTdPmrPei.c


示例17: InternalGetTpm2DeviceInterface

/**
  This function get TPM2.0 interface.

  @retval TPM2.0 interface.
**/
TPM2_DEVICE_INTERFACE *
InternalGetTpm2DeviceInterface (
  VOID
  )
{
  EFI_HOB_GUID_TYPE *Hob;

  Hob = GetFirstGuidHob (&mInternalTpm2DeviceInterfaceGuid);
  if (Hob == NULL) {
    return NULL;
  }
  return (TPM2_DEVICE_INTERFACE *)(Hob + 1);
}
开发者ID:FishYu1222,项目名称:edk2,代码行数:18,代码来源:Tpm2DeviceLibRouterPei.c


示例18: GetSavedData

PRE_PI_EXTRACT_GUIDED_SECTION_DATA *
GetSavedData (
  VOID
  )
{
  EFI_HOB_GUID_TYPE *GuidHob;
  GUID              SavedDataGuid = PRE_PI_EXTRACT_GUIDED_SECTION_DATA_GUID;

  GuidHob = GetFirstGuidHob(&SavedDataGuid);
  GuidHob++;
  
  return (PRE_PI_EXTRACT_GUIDED_SECTION_DATA *)GuidHob;
}
开发者ID:hsienchieh,项目名称:uefilab,代码行数:13,代码来源:PrePiExtractGuidedSectionLib.c


示例19: GetMailboxLocationFromHob

/**
  Get the location of Mailbox pointer from the GUIDed HOB.

  @return Pointer to the location saved Mailbox pointer.

**/
UINT64 *
GetMailboxLocationFromHob (
  VOID
  )
{
  EFI_HOB_GUID_TYPE        *GuidHob;

  GuidHob = GetFirstGuidHob (&gEfiDebugAgentGuid);
  if (GuidHob == NULL) {
    return NULL;
  }
  return (UINT64 *) (GET_GUID_HOB_DATA(GuidHob));
}
开发者ID:EvanLloyd,项目名称:tianocore,代码行数:19,代码来源:SecPeiDebugAgentLib.c


示例20: InternalGetHashInterface

/**
  This function get hash interface.

  @retval hash interface.
**/
HASH_INTERFACE_HOB *
InternalGetHashInterface (
  VOID
  )
{
  EFI_HOB_GUID_TYPE *Hob;

  Hob = GetFirstGuidHob (&mHashLibPeiRouterGuid);
  if (Hob == NULL) {
    return NULL;
  }
  return (HASH_INTERFACE_HOB *)(Hob + 1);
}
开发者ID:EvanLloyd,项目名称:tianocore,代码行数:18,代码来源:HashLibBaseCryptoRouterPei.c



注:本文中的GetFirstGuidHob函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ GetFirstImageInList函数代码示例发布时间:2022-05-30
下一篇:
C++ GetFirstArgument函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap