本文整理汇总了C++中GetCapture函数的典型用法代码示例。如果您正苦于以下问题：C++ GetCapture函数的具体用法？C++ GetCapture怎么用？C++ GetCapture使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了GetCapture函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: OnLButtonUp
void CMDIView::OnLButtonUp(UINT nFlags, CPoint point)
{
if(this == GetCapture())
ReleaseCapture(); // Stop capturing mouse messages
// Make sure there is an element
if(m_pTempElement)
{ // Add the element pointer to the sketch
GetDocument()->AddElement(m_pTempElement);
InvalidateRect(&m_pTempElement->GetEnclosingRect());
m_pTempElement.reset(); // Reset the element pointer
}
}
开发者ID:Jyang772，项目名称:MDI，代码行数:14，代码来源:MDIView.cpp
示例2: InternalDialog
int
InternalDialog(HWND hDlg)
{
HWND hWnd,hWndFocus,hWndCapture;
int rc = 0;
MSG msg;
if(hDlg == 0)
return 0;
hWnd = GetWindowWord(hDlg,DWW_PARENT);
if ((hWndCapture = GetCapture()))
ReleaseCapture();
while (IsWindow(hDlg) && (GetWindowWord(hDlg,DWW_STATUS) == 0)) {
if(GetMessage(&msg, (HWND)0, 0, 0)) {
if (msg.message == WM_CLOSE) {
DispatchMessage (&msg) ;
break;
}
if(IsDialogMessage(hDlg,&msg))
continue;
TranslateMessage (&msg) ;
DispatchMessage (&msg) ;
}
if (hWnd) { /* if there is an owner */
if (!PeekMessage(&msg,hDlg,0,0,PM_NOREMOVE))
SendMessage(hWnd,WM_ENTERIDLE,MSGF_DIALOGBOX,(LPARAM)hDlg);
}
}
if (IsWindow(hDlg)) {
rc = GetWindowWord(hDlg,DWW_RESULT);
DestroyWindow(hDlg);
}
if(hWnd && IsWindow(hWnd)) {
EnableWindow(hWnd, TRUE);
if ((hWndFocus = GetDialogFocus(hWnd)))
SetFocus(hWndFocus);
}
if (hWndCapture)
SetCapture(hWndCapture);
return rc;
}
开发者ID:ErisBlastar，项目名称:osfree，代码行数:49，代码来源:Dialog.c
示例3: OnRButtonUp
void CDiasStatusBar::OnRButtonUp (UINT nFlags, CPoint point) {
if (GetCapture() != this) {
ReleaseCapture ();
return;
}
ReleaseCapture ();
CRect rect1, rect2;
GetItemRect (2, rect1);
GetItemRect (3, rect2);
uvar32_64 n, count = 0;
CaImMenu menu;
CaImMenuItem** ppItems;
menu.CreatePopupMenu ();
GetItemRect (2, rect1);
GetItemRect (3, rect2);
if (rect1.PtInRect (point) || rect2.PtInRect (point)) {
count = theApp.GeomScales.GetCount ();
ppItems = new CaImMenuItem*[count];
for (n = 0; n < count; ++n) {
ppItems[n] = new CaImMenuItem (theApp.GeomScales[n].GetName() + "\t(" + theApp.GeomScales[n].GetUnits () + ")",
(theApp.GeomScales[aimActive].GetPos () == n) ? AMIS_CHECKED : 0);
menu.AppendMenu (MF_STRING | MF_ENABLED | MF_OWNERDRAW, ID_TOOLS_GEOMSCALE_1 + n, (LPCTSTR)ppItems[n]);
}
menu.CheckMenuRadioItem (0, n, theApp.GeomScales[aimActive].GetPos (), MF_BYPOSITION);
}
GetItemRect (4, rect1);
GetItemRect (5, rect2);
if (rect1.PtInRect (point) || rect2.PtInRect (point)) {
count = theApp.DensScales.GetCount ();
ppItems = new CaImMenuItem*[count];
for (n = 0; n < count; ++n) {
ppItems[n] = new CaImMenuItem (theApp.DensScales[n].GetName() + "\t(" + theApp.DensScales[n].GetUnits () + ")",
(theApp.DensScales[aimActive].GetPos () == n) ? AMIS_CHECKED : 0);
menu.AppendMenu (MF_STRING | MF_ENABLED | MF_OWNERDRAW, ID_TOOLS_GEOMSCALE_1 + n, (LPCTSTR)ppItems[n]);
}
menu.CheckMenuRadioItem (0, n, theApp.DensScales[aimActive].GetPos (), MF_BYPOSITION);
}
GetWindowRect (rect2);
menu.TrackPopupMenu (TPM_LEFTALIGN, point.x + rect2.left, point.y + rect2.top, this);
for (n = 0; n < count; ++n)
delete ppItems[n];
if (count > 0)
delete [] ppItems;
}
开发者ID:macx0r，项目名称:dias-inet，代码行数:49，代码来源:DiasStatusBar.cpp
示例4: StopCurAnimate
void SButton::OnStateChanged( DWORD dwOldState,DWORD dwNewState )
{
StopCurAnimate();
if(GetCapture()==m_swnd) //点击中
return;
if(m_bAnimate &&
((dwOldState==WndState_Normal && dwNewState==WndState_Hover)
||(dwOldState==WndState_Hover && dwNewState==WndState_Normal)))
{//启动动画
m_byAlphaAni=5;
GetContainer()->RegisterTimelineHandler(this);
}
}
开发者ID:kenchen1101，项目名称:soui，代码行数:15，代码来源:SCmnCtrl.cpp
示例5: GetCursorPos
// 鼠标左键按下
void ProgressController::left_button_down()
{
// 查询当前光标位置，判断光标是在滑道还是滑块上
POINT p;
GetCursorPos(&p);
HWND hwnd = GetCapture();
ScreenToClient(hwnd, &p);
if (p.x >= m_left && p.x <= m_left + m_width)
{
// 如果光标在滑道上
POINT point;
GetCursorPos(&point); // 查询光标位置
}
}
开发者ID:shimachao，项目名称:SLPlayer，代码行数:16，代码来源:ProgressController.cpp
示例6:
void CRoundButton2::OnCaptureChanged(CWnd *pWnd)
{
// Check, if we lost the mouse-capture
if (GetCapture() != this)
{
// We have lost the mouse-capture, so the mouse has left the buttons face
m_bMouseOnButton = false;
// Redraw Control, if Button is hot
if (m_bIsHotButton)
Invalidate();
}
CButton::OnCaptureChanged(pWnd);
}
开发者ID:IcyX，项目名称:bote，代码行数:15，代码来源:RoundButton2.cpp
示例7: KillTimer
void CAutoRepeatButton::OnLButtonUp(UINT nFlags, CPoint point)
{
KillTimer(IDT_TIMER);
if(GetCapture() != NULL)
{ /* release capture */
ReleaseCapture();
if(sent == 0 && (GetState() & BST_PUSHED) != 0)
GetParent()->SendMessage(WM_COMMAND, MAKELONG(GetDlgCtrlID(), BN_CLICKED), (LPARAM)m_hWnd);
} /* release capture */
//CButton::OnLButtonUp(nFlags, point);
}
开发者ID:drkjschmidt，项目名称:rudolf，代码行数:15，代码来源:AutoRepeatButton.cpp
示例8: OnMouseMove
// on mouse move
void CSplitterFrame::OnMouseMove(UINT nFlags, CPoint point)
{
if(GetCapture()==this) {
CPoint ptCursor;
GetCursorPos(&ptCursor);
CPoint pt = GetAbsPosition();
if(sp_uiDockSide==AFX_IDW_DOCKBAR_LEFT || sp_uiDockSide==AFX_IDW_DOCKBAR_RIGHT) {
pt.x = ptCursor.x;
} else if(sp_uiDockSide==AFX_IDW_DOCKBAR_TOP || sp_uiDockSide==AFX_IDW_DOCKBAR_BOTTOM) {
pt.y = ptCursor.y;
}
SetAbsPosition(pt);
}
CWnd::OnMouseMove(nFlags, point);
}
开发者ID:rdrago，项目名称:LCSource，代码行数:16，代码来源:SplitterFrame.cpp
示例9: OnLButtonUp
void CSketcherView::OnLButtonUp(UINT nFlags, CPoint point)
{
if(this == GetCapture())
ReleaseCapture(); // Stop capturing mouse messages
// Make sure there is an element
if(m_pTempElement)
{
// Call a document class function to store the element
// pointed to by m_pTempElement in the document object
delete m_pTempElement; // This code is temporary
m_pTempElement = 0; // Reset the element pointer
}
}
开发者ID:ktjones，项目名称:BVC2010，代码行数:15，代码来源:SketcherView.cpp
示例10: OnLButtonUp
LTBOOL CFolderJoin::OnLButtonUp(int x, int y)
{
if (bDblClick)
{
bDblClick = LTFALSE;
return LTFALSE;
}
if (GetCapture())
{
return m_pPassEdit->OnEnter();
}
return CBaseFolder::OnLButtonUp(x,y);
}
开发者ID:germanocaldeira，项目名称:no-one-lives-forever，代码行数:15，代码来源:FolderJoin.cpp
示例11: InitToolTip
BOOL CExtButton::PreTranslateMessage(MSG* pMsg)
{
if( !CExtPopupMenuWnd::IsMenuTracking() )
{
InitToolTip();
m_ToolTip.RelayEvent(pMsg);
}
// if( CExtPopupMenuWnd::IsMenuTracking() )
// return TRUE;
if( ( pMsg->message == WM_KEYDOWN
|| pMsg->message == WM_KEYUP
)
&&
( pMsg->wParam == VK_RETURN
|| pMsg->wParam == VK_SPACE
)
)
{
if( IsWindowEnabled() && IsWindowVisible() && (!m_bPushTracking) )
{
if( (pMsg->message == WM_KEYDOWN && pMsg->wParam == VK_RETURN)
||
(pMsg->message == WM_KEYUP && pMsg->wParam == VK_SPACE)
)
{
if( GetCapture() == this )
ReleaseCapture();
m_bMouseOver = m_bPushed = m_bPushTracking = m_bKeyTracking = FALSE;
Invalidate();
UpdateWindow();
_OnClick();
return TRUE;
}
if(pMsg->message == WM_KEYDOWN && pMsg->wParam == VK_SPACE)
{
m_bMouseOver = m_bPushed = m_bKeyTracking = TRUE;
SetCapture();
Invalidate();
UpdateWindow();
return TRUE;
}
} // if( IsWindowEnabled() && IsWindowVisible() && (!m_bPushTracking) )
return TRUE;
}
return CButton::PreTranslateMessage(pMsg);
}
开发者ID:darwinbeing，项目名称:trade，代码行数:48，代码来源:ExtButton.cpp
示例12: switch
//////////////////
// Change state for finite-state-machine.
//
void CDragDropMgr::SetState(UINT iState)
{
// TRACE(_T("CDragDropMgr::SetState %d\n"),iState);
if (iState != m_iState)
{
switch (iState)
{
case CAPTURED:
::SetCapture(m_hwndTracking); // capture mouse input
break;
case LDRAGGING:
case RDRAGGING:
m_hCursorSave = GetCursor(); // save current cursor
break;
default: // NONE
if (GetCapture() == m_hwndTracking)
::ReleaseCapture(); // release capture and..
SetCursor(m_hCursorSave); // ..restore cursor
if (m_pDragImage)
{
m_pDragImage->DragLeave(CWnd::FromHandle(m_ddi.hwndTarget));
m_pDragImage->EndDrag(); // end drawing and..
delete m_pDragImage; // ..destroy..
m_pDragImage=NULL; // ..image list
}
if (m_hwndTracking)
InvalidateRect(m_hwndTracking, NULL, FALSE);
if (m_ddi.hwndTarget)
InvalidateRect(m_ddi.hwndTarget, NULL, FALSE);
delete m_ddi.pData;
m_ddi.pData = NULL;
m_hwndTracking = NULL;
break;
}
m_iState = iState;
}
}
开发者ID:jithuin，项目名称:infogeezer，代码行数:51，代码来源:DragDrop.cpp
示例13: TraceRect
void
ZListTip::OnMouseMove( UINT uFlags, CPoint pt )
{
#ifdef DEBUG_ALL
TraceRect( "ZListTip::OnMouseMove rectTitle: ", m_rectTitle );
TracePoint( "ZListTip::OnMouseMove pt: ", pt );
#endif
if ( m_rectTitle.PtInRect( pt ) == FALSE )
{
#ifdef DEBUG_ALL
TracePoint( "ZListTip::OnMouseMove PtInRect: ", pt );
#endif
#if 0
if ( GetCapture( ) == this )
ReleaseCapture( );
SetWindowPos( 0, 0, 0, 0, 0,
SWP_HIDEWINDOW | SWP_NOMOVE | SWP_NOSIZE |
SWP_NOZORDER | SWP_NOACTIVATE );
#else
Hide( );
#endif
// Forward the message
ClientToScreen( &pt );
CWnd *pWnd = WindowFromPoint( pt );
if ( pWnd == this )
pWnd = m_pParentWnd;
CWnd *pWndTemp = GetFocus( );
if ( pWndTemp != pWnd )
pWnd->SetFocus( );
zLONG lParam = MAKELONG( pt.x, pt.y );
int nHitTest = (int) pWnd->SendMessage( WM_NCHITTEST, 0, lParam );
if ( nHitTest == HTCLIENT )
{
pWnd->ScreenToClient( &pt );
lParam = MAKELONG( pt.x, pt.y );
pWnd->PostMessage( WM_MOUSEMOVE, uFlags, lParam );
}
else
{
pWnd->PostMessage( WM_NCMOUSEMOVE, nHitTest, lParam );
}
}
}
开发者ID:DeegC，项目名称:ZeidonTools，代码行数:48，代码来源:ZdCtl.cpp
示例14: get_keyboard_lparam
bool track_bar::on_hooked_message(message_hook_manager::t_message_hook_type p_type, int code, WPARAM wp, LPARAM lp)
{
win32_keyboard_lparam & lpkeyb = get_keyboard_lparam(lp);
if (wp == VK_ESCAPE && !lpkeyb.transition_code && !lpkeyb.previous_key_state)
{
destroy_tooltip();
if (GetCapture() == get_wnd())
ReleaseCapture();
m_dragging = false;
set_position_internal(m_position);
message_hook_manager::deregister_hook(message_hook_manager::type_keyboard, this);
m_hook_registered=false;
return true;
}
return false;
}
开发者ID:samithaj，项目名称:columns_ui，代码行数:16，代码来源:trackbar.cpp
示例15: _GetButtonPtr
void CFlatToolbar::OnCancelMode()
{
CControlBar::OnCancelMode();
if (m_iButtonCapture >= 0)
{
AFX_TBBUTTON* pTBB = _GetButtonPtr(m_iButtonCapture);
ASSERT(!(pTBB->nStyle & TBBS_SEPARATOR));
UINT nNewStyle = (pTBB->nStyle & ~TBBS_PRESSED);
if (GetCapture() == this)
ReleaseCapture();
SetButtonStyle(m_iButtonCapture, nNewStyle);
m_iButtonCapture = -1;
UpdateWindow();
}
}
开发者ID:Joincheng，项目名称:lithtech，代码行数:16，代码来源:flattoolbar.cpp
示例16: SetFocus
void WLTreeItemAL::OnLButtonDown(UINT /*nFlags*/, CPoint point)
{
SetFocus() ;
m_bLButtonDown = TRUE ;
HostToClient(&point) ;
if (SendMessage(WM_CAN_YOU_DRAG, 0, 0))
{
if (GetCapture() != this)
SetCapture() ;
m_bPrepareDrag = TRUE ;
m_dwPrepareDragTime = GetTickCount() ;
m_ptPrepareDragPoint = point ;
}
}
开发者ID:baogechen，项目名称:foundit，代码行数:16，代码来源:WLTreeItemAL.cpp
示例17: GetCursorPos
//---------------------------------------------------------------------------------------
void z_ed3View::OnRButtonDown(UINT nFlags, CPoint point)
{
GetCursorPos(&_scrPoint);
if(GetCapture()!= this)
SetCapture();
GetCursorPos(&_scrPoint);
HideTheCursor();
_mm._rdown = 1;
_rotating = _mm._ldown;
_mm._pt = point;
_mm._ptd = point;
CView::OnRButtonDown(nFlags, point);
}
开发者ID:comarius，项目名称:getic3d，代码行数:17，代码来源:z_ed3View.cpp
示例18: Escape
void CFolderSave::Escape()
{
if (GetCapture())
{
m_pEdit->Select(LTFALSE);
g_pColCtrl->SetString(0, g_hOldName);
g_pColCtrl->SetString(2, g_hOldTime);
SetCapture(LTNULL);
RemoveFixedControl(m_pEdit);
}
else
{
CBaseFolder::Escape();
}
}
开发者ID:Arc0re，项目名称:lithtech，代码行数:16，代码来源:FolderSave.cpp
示例19: Escape
void CFolderJoin::Escape()
{
if (m_pPassEdit && GetCapture() == m_pPassEdit)
{
SetCapture(LTNULL);
m_szPassword[0] = LTNULL;
RemoveFixedControl(m_pPassEdit);
RemoveFixedControl(m_pPassLabel);
RemoveFixedControl(m_pPassBack);
m_bAskingForPassword = FALSE;
ForceMouseUpdate();
}
else
CBaseFolder::Escape();
}
开发者ID:germanocaldeira，项目名称:no-one-lives-forever，代码行数:16，代码来源:FolderJoin.cpp
示例20: PreTranslateMessage
BOOL COptionTreeImagePopUp::PreTranslateMessage(MSG* pMsg)
{
// Relay tooltip
if (IsWindow(m_ttToolTip.GetSafeHwnd()))
{
m_ttToolTip.RelayEvent(pMsg);
}
// Sometimes if the picker loses focus it is never destroyed
if (GetCapture()->GetSafeHwnd() != GetSafeHwnd())
{
SetCapture();
}
return CWnd::PreTranslateMessage(pMsg);
}
开发者ID:ngphloc，项目名称:agmagic，代码行数:16，代码来源:optiontreeimagepopup.cpp
注：本文中的GetCapture函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论