C++ GWEN_Buffer_GetStart函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GWEN_Buffer_GetStart函数的典型用法代码示例。如果您正苦于以下问题：C++ GWEN_Buffer_GetStart函数的具体用法？C++ GWEN_Buffer_GetStart怎么用？C++ GWEN_Buffer_GetStart使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GWEN_Buffer_GetStart函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GWEN_Buffer_AppendString

GWEN_DIALOG *Dlg_Test1_new() {
    GWEN_DIALOG *dlg;
    int rv;
    const char *s;
    GWEN_BUFFER *tbuf;

    tbuf=GWEN_Buffer_new(0, 256, 0, 1);
    s=getenv("DIALOG_DIR");
    if (s && *s)
        GWEN_Buffer_AppendString(tbuf, s);
    else
        GWEN_Buffer_AppendString(tbuf, MEDIAPATH);
    dlg=GWEN_Dialog_new("dlg_test");
    GWEN_Dialog_SetSignalHandler(dlg, _gwenGuiSignalHandler);
    GWEN_Dialog_AddMediaPath(dlg, GWEN_Buffer_GetStart(tbuf));

    /* read dialog from dialog description file */
    GWEN_Buffer_AppendString(tbuf, GWEN_DIR_SEPARATOR_S "dlg_test.dlg");
    rv=GWEN_Dialog_ReadXmlFile(dlg, GWEN_Buffer_GetStart(tbuf));
    GWEN_Buffer_free(tbuf);
    if (rv<0) {
        DBG_INFO(GWEN_LOGDOMAIN, "here (%d).", rv);
        GWEN_Dialog_free(dlg);
        return NULL;
    }

    /* done */
    return dlg;
}

开发者ID:Zauberstuhl，项目名称:gwenhywfar，代码行数:29，代码来源:dlg_test.c

示例2: GWEN_Directory_FindPathForFile

int GWEN_Directory_FindPathForFile(const GWEN_STRINGLIST *paths,
                                   const char *filePath,
                                   GWEN_BUFFER *fbuf) {
  GWEN_STRINGLISTENTRY *se;

  se=GWEN_StringList_FirstEntry(paths);
  while(se) {
    GWEN_BUFFER *tbuf;
    FILE *f;

    tbuf=GWEN_Buffer_new(0, 256, 0, 1);
    GWEN_Buffer_AppendString(tbuf, GWEN_StringListEntry_Data(se));
    GWEN_Buffer_AppendString(tbuf, DIRSEP);
    GWEN_Buffer_AppendString(tbuf, filePath);
    DBG_VERBOUS(GWEN_LOGDOMAIN, "Trying \"%s\"",
                GWEN_Buffer_GetStart(tbuf));
    f=fopen(GWEN_Buffer_GetStart(tbuf), "r");
    if (f) {
      fclose(f);
      DBG_INFO(GWEN_LOGDOMAIN,
               "File \"%s\" found in folder \"%s\"",
               filePath,
               GWEN_StringListEntry_Data(se));
      GWEN_Buffer_AppendString(fbuf, GWEN_StringListEntry_Data(se));
      GWEN_Buffer_free(tbuf);
      return 0;
    }
    GWEN_Buffer_free(tbuf);

    se=GWEN_StringListEntry_Next(se);
  }

  DBG_INFO(GWEN_LOGDOMAIN, "File \"%s\" not found", filePath);
  return GWEN_ERROR_NOT_FOUND;
}

开发者ID:aqbanking，项目名称:gwenhywfar，代码行数:35，代码来源:directory_all.c

示例3: GWEN_Gui_CProgress_Log

int GWEN_Gui_CProgress_Log(GWEN_GUI_CPROGRESS *cp,
                           GWEN_UNUSED GWEN_LOGGER_LEVEL level,
                           const char *text)
{
  assert(cp);
  assert(text);

  if (!(GWEN_Gui_GetFlags(cp->gui) & GWEN_GUI_FLAGS_NONINTERACTIVE)) {
    GWEN_BUFFER *tbuf;
    const char *t;

    tbuf=GWEN_Buffer_new(0, 256, 0, 1);
    GWEN_Gui_GetRawText(cp->gui, text, tbuf);
    t=GWEN_Buffer_GetStart(tbuf);
    if (t[GWEN_Buffer_GetUsedBytes(tbuf)-1]!='\n') {
      GWEN_Buffer_AppendByte(tbuf, '\n');
      /* Just in case the buffer has been reallocated */
      t=GWEN_Buffer_GetStart(tbuf);
    }
    GWEN_Gui_StdPrintf(cp->gui, stderr, "%s", t);

    GWEN_Buffer_AppendString(cp->logBuf, t);
    GWEN_Buffer_free(tbuf);
    tbuf=0;
    if (cp->aborted)
      return GWEN_ERROR_USER_ABORTED;
  }
  return 0;
}

开发者ID:cstim，项目名称:gwenhywfar，代码行数:29，代码来源:cprogress.c

示例4: GWEN_Buffer_AppendString

GWEN_TIME *AB_ImExporter_DateFromString(const char *p, const char *tmpl,
					int inUtc) {
  GWEN_TIME *ti;

  if (strchr(tmpl, 'h')==0) {
    GWEN_BUFFER *dbuf;
    GWEN_BUFFER *tbuf;

    dbuf=GWEN_Buffer_new(0, 32, 0, 1);
    GWEN_Buffer_AppendString(dbuf, p);
    GWEN_Buffer_AppendString(dbuf, "-12:00");

    tbuf=GWEN_Buffer_new(0, 32, 0, 1);
    GWEN_Buffer_AppendString(tbuf, tmpl);
    GWEN_Buffer_AppendString(tbuf, "-hh:mm");

    ti=GWEN_Time_fromUtcString(GWEN_Buffer_GetStart(dbuf),
			       GWEN_Buffer_GetStart(tbuf));
    GWEN_Buffer_free(tbuf);
    GWEN_Buffer_free(dbuf);
  }
  else {
    if (inUtc)
      ti=GWEN_Time_fromUtcString(p, tmpl);
    else
      ti=GWEN_Time_fromString(p, tmpl);
  }
  return ti;
}

开发者ID:Zauberstuhl，项目名称:aqbanking，代码行数:29，代码来源:imexporter.c

示例5: AB_Value_toHbciString

void AB_Value_toHbciString(const AB_VALUE *v, GWEN_BUFFER *buf) {
  GWEN_BUFFER *tbuf;
  char *p;
  int l;

  tbuf=GWEN_Buffer_new(0, 32, 0, 1);
  AB_Value_toHumanReadableString2(v, tbuf, 2, 0);

  /* convert decimal komma */
  p=GWEN_Buffer_GetStart(tbuf);
  while(*p) {
    if (*p=='.') {
      *p=',';
      break;
    }
    p++;
  }

  /* remove trailing zeroes */
  p=GWEN_Buffer_GetStart(tbuf);
  l=strlen(GWEN_Buffer_GetStart(tbuf));
  if (l>0 && strchr(p, ',')!=NULL) {
    l--;
    while(l>0 && p[l]=='0') {
      p[l]=0;
      l--;
    }
  }

  GWEN_Buffer_AppendString(buf, GWEN_Buffer_GetStart(tbuf));
  GWEN_Buffer_free(tbuf);
}

开发者ID:Zauberstuhl，项目名称:aqbanking，代码行数:32，代码来源:value.c

示例6: GWEN_PathManager_FindFile

int GWEN_PathManager_FindFile(const char *destLib,
                              const char *pathName,
                              const char *fileName,
                              GWEN_BUFFER *fbuf) {
  GWEN_DB_NODE *dbT;

  assert(gwen__paths);
  dbT=GWEN_DB_GetGroup(gwen__paths, GWEN_PATH_FLAGS_NAMEMUSTEXIST,
                       destLib);
  if (dbT) {
    dbT=GWEN_DB_GetGroup(dbT, GWEN_PATH_FLAGS_NAMEMUSTEXIST,
                         pathName);
    if (dbT) {
      int i;
      const char *s;
      GWEN_DB_NODE *dbN;
      GWEN_BUFFER *tbuf;

      tbuf=GWEN_Buffer_new(0, 256, 0, 1);

      /* check all paths */
      dbN=GWEN_DB_FindFirstGroup(dbT, "pair");
      while(dbN) {
        for (i=0; ; i++) {
          s=GWEN_DB_GetCharValue(dbN, "path", i, 0);
          if (!s)
            break;
          else {
            FILE *f;

            GWEN_Buffer_AppendString(tbuf, s);
            GWEN_Buffer_AppendString(tbuf, GWEN_DIR_SEPARATOR_S);
            GWEN_Buffer_AppendString(tbuf, fileName);
            DBG_DEBUG(GWEN_LOGDOMAIN, "Trying \"%s\"",
                      GWEN_Buffer_GetStart(tbuf));
            f=fopen(GWEN_Buffer_GetStart(tbuf), "r");
            if (f) {
              fclose(f);
              DBG_DEBUG(GWEN_LOGDOMAIN,
                        "File \"%s\" found in folder \"%s\"",
                        fileName,
                        s);
              GWEN_Buffer_AppendBuffer(fbuf, tbuf);
              GWEN_Buffer_free(tbuf);
              return 0;
            }
            GWEN_Buffer_Reset(tbuf);
          }
        }

        dbN=GWEN_DB_FindNextGroup(dbN, "pair");
      }
      GWEN_Buffer_free(tbuf);
    }
  }

  DBG_INFO(GWEN_LOGDOMAIN, "File \"%s\" not found", fileName);
  return GWEN_ERROR_NOT_FOUND;
}

开发者ID:Zauberstuhl，项目名称:gwenhywfar，代码行数:59，代码来源:pathmanager.c

示例7: LC_EgkCard_ReadRawPd

LC_CLIENT_RESULT LC_EgkCard_ReadRawPd(LC_CARD *card, GWEN_BUFFER *buf){
  LC_EGKCARD *egk;
  LC_CLIENT_RESULT res;
  GWEN_BUFFER *lbuf;
  int size;
  const unsigned char *p;

  assert(card);
  egk=GWEN_INHERIT_GETDATA(LC_CARD, LC_EGKCARD, card);
  assert(egk);

  res=LC_Card_SelectEf(card, "EF_PD");
  if (res!=LC_Client_ResultOk)
    return res;

  lbuf=GWEN_Buffer_new(0, 2, 0, 1);
  res=LC_Card_IsoReadBinary(card, 0, 0, 2, lbuf);
  if (res!=LC_Client_ResultOk) {
    GWEN_Buffer_free(lbuf);
    return res;
  }

  if (GWEN_Buffer_GetUsedBytes(lbuf)<2) {
    DBG_ERROR(LC_LOGDOMAIN, "Invalid response size (%d)",
	      GWEN_Buffer_GetUsedBytes(lbuf));
    GWEN_Buffer_free(lbuf);
    return LC_Client_ResultDataError;
  }

  p=(const unsigned char*)GWEN_Buffer_GetStart(lbuf);
  assert(p);
  size=(*(p++))<<8;
  size+=*p;
  if (size<2) {
    DBG_ERROR(LC_LOGDOMAIN, "Invalid size spec in data (%d)", size);
    GWEN_Buffer_free(lbuf);
    return LC_Client_ResultDataError;
  }
  size-=2;

  GWEN_Buffer_Reset(lbuf);

  if (size) {
    res=LC_Card_ReadBinary(card, 2, size, lbuf);
    if (res!=LC_Client_ResultOk) {
      DBG_INFO(LC_LOGDOMAIN, "here (%d)", res);
      GWEN_Buffer_free(lbuf);
      return res;
    }
  }

  res=LC_EgkCard_Unzip(GWEN_Buffer_GetStart(lbuf),
		       GWEN_Buffer_GetUsedBytes(lbuf),
                       buf);
  GWEN_Buffer_free(lbuf);

  return res;
}

开发者ID:aqbanking，项目名称:libchipcard，代码行数:58，代码来源:egkcard.c

示例8: _dumpBal

static
void _dumpBal(const AB_BALANCE *bal,
	      const GWEN_TIME *ti,
	      FILE *fd) {
  if (bal) {
    const GWEN_TIME *bti;
    const AB_VALUE *val;
  
    bti=AB_Balance_GetTime(bal);
    if (bti==0)
      bti=ti;
    if (bti) {
      GWEN_BUFFER *tbuf;

      tbuf=GWEN_Buffer_new(0, 24, 0, 1);
      GWEN_Time_toString(bti, "DD.MM.YYYY\thh:mm", tbuf);
      fprintf(fd, "%s\t", GWEN_Buffer_GetStart(tbuf));
      GWEN_Buffer_free(tbuf);
    }
    else {
      fprintf(fd, "\t\t");
    }
  
    val=AB_Balance_GetValue(bal);
    if (val) {
      AB_VALUE *vNew;
      GWEN_BUFFER *vbuf;
      const char *cur;

      vNew=AB_Value_dup(val);
      AB_Value_SetCurrency(vNew, NULL);
      vbuf=GWEN_Buffer_new(0, 32, 0, 1);
      AB_Value_toHumanReadableString(vNew, vbuf, 2);
      fprintf(fd, "%s\t", GWEN_Buffer_GetStart(vbuf));
      GWEN_Buffer_free(vbuf);
      AB_Value_free(vNew);

      cur=AB_Value_GetCurrency(val);
      if (cur)
	fprintf(fd, "%s\t", cur);
      else
	fprintf(fd, "\t");
    }
    else {
      fprintf(fd, "\t\t");
    }
  }
  else {
    fprintf(fd, "\t\t\t\t");
  }
}

开发者ID:Zauberstuhl，项目名称:aqbanking，代码行数:51，代码来源:listbal.c

示例9: GWEN_PathManager_GetMatchingFilesRecursively

int GWEN_PathManager_GetMatchingFilesRecursively(const char *destLib,
    const char *pathName,
    const char *subFolderName,
    GWEN_STRINGLIST *sl,
    const char *mask) {
  GWEN_DB_NODE *dbT;

  assert(gwen__paths);
  dbT=GWEN_DB_GetGroup(gwen__paths, GWEN_PATH_FLAGS_NAMEMUSTEXIST,
                       destLib);
  if (dbT) {
    dbT=GWEN_DB_GetGroup(dbT, GWEN_PATH_FLAGS_NAMEMUSTEXIST,
                         pathName);
    if (dbT) {
      int i;
      const char *s;
      GWEN_DB_NODE *dbN;
      GWEN_BUFFER *tbuf;

      tbuf=GWEN_Buffer_new(0, 256, 0, 1);

      /* check all paths */
      dbN=GWEN_DB_FindFirstGroup(dbT, "pair");
      while(dbN) {
        for (i=0; ; i++) {
          s=GWEN_DB_GetCharValue(dbN, "path", i, 0);
          if (!s)
            break;
          else {
            GWEN_Buffer_AppendString(tbuf, s);
            if (subFolderName && *subFolderName) {
              GWEN_Buffer_AppendString(tbuf, GWEN_DIR_SEPARATOR_S);
              GWEN_Buffer_AppendString(tbuf, subFolderName);
            }

            DBG_DEBUG(GWEN_LOGDOMAIN, "Trying \"%s\"",
                      GWEN_Buffer_GetStart(tbuf));
            GWEN_Directory_GetMatchingFilesRecursively(GWEN_Buffer_GetStart(tbuf), sl, mask);
            GWEN_Buffer_Reset(tbuf);
          }
        }

        dbN=GWEN_DB_FindNextGroup(dbN, "pair");
      }
      GWEN_Buffer_free(tbuf);
    }
  }

  return 0;
}

开发者ID:Zauberstuhl，项目名称:gwenhywfar，代码行数:50，代码来源:pathmanager.c

示例10: AIO_OfxGroup_STATUS_AddData

int AIO_OfxGroup_STATUS_AddData(AIO_OFX_GROUP *g, const char *data)
{
  AIO_OFX_GROUP_STATUS *xg;

  assert(g);
  xg=GWEN_INHERIT_GETDATA(AIO_OFX_GROUP, AIO_OFX_GROUP_STATUS, g);
  assert(xg);

  if (xg->currentElement) {
    GWEN_BUFFER *buf;
    int rv;
    const char *s;

    buf=GWEN_Buffer_new(0, strlen(data), 0, 1);
    rv=AIO_OfxXmlCtx_SanitizeData(AIO_OfxGroup_GetXmlContext(g), data, buf);
    if (rv<0) {
      DBG_INFO(AQBANKING_LOGDOMAIN, "here (%d)", rv);
      GWEN_Buffer_free(buf);
      return rv;
    }
    s=GWEN_Buffer_GetStart(buf);
    if (*s) {
      DBG_INFO(AQBANKING_LOGDOMAIN,
               "AddData: %s=[%s]", xg->currentElement, s);
      if (strcasecmp(xg->currentElement, "CODE")==0) {
        if (1!=sscanf(s, "%d", &xg->code)) {
          DBG_ERROR(AQBANKING_LOGDOMAIN,
                    "Bad data for element [%s]",
                    xg->currentElement);
          GWEN_Buffer_free(buf);
          return GWEN_ERROR_BAD_DATA;
        }
      }
      else if (strcasecmp(xg->currentElement, "SEVERITY")==0) {
        free(xg->severity);
        xg->severity=strdup(GWEN_Buffer_GetStart(buf));
      }
      else {
        DBG_INFO(AQBANKING_LOGDOMAIN,
                 "Ignoring data for unknown element [%s]",
                 xg->currentElement);
      }
    }
    GWEN_Buffer_free(buf);
  }

  return 0;
}

开发者ID:cstim，项目名称:aqbanking，代码行数:48，代码来源:g_status.c

示例11: GWEN_Padd_UnpaddWithIso9796_2

int GWEN_Padd_UnpaddWithIso9796_2(GWEN_BUFFER *buf) {
  uint32_t l;
  uint32_t realSize;
  const uint8_t *p;

  l=GWEN_Buffer_GetUsedBytes(buf);
  if (l<11) {
    DBG_ERROR(GWEN_LOGDOMAIN, "Buffer contains too few bytes");
    return GWEN_ERROR_INVALID;
  }

  p=(const uint8_t*)GWEN_Buffer_GetStart(buf);
  if (*p!=0x60) {
    DBG_ERROR(GWEN_LOGDOMAIN, "First byte is not a 0x60");
    return GWEN_ERROR_BAD_DATA;
  }
  p++;
  l=0;
  while(*p==0x00) {
    l++;
    p++;
  }
  if (*p!=0x01) {
    /*DBG_ERROR(GWEN_LOGDOMAIN, "First byte after padding is not a 0x01");*/
    return GWEN_ERROR_BAD_DATA;
  }

  realSize=GWEN_Buffer_GetUsedBytes(buf)-11-l;
  GWEN_Buffer_Crop(buf, 10+l, realSize);

  return 0;
}

开发者ID:Zauberstuhl，项目名称:gwenhywfar，代码行数:32，代码来源:padd.c

示例12: Gtk3Gui_WLabel_SetCharProperty

static GWENHYWFAR_CB
int Gtk3Gui_WLabel_SetCharProperty(GWEN_WIDGET *w,
                                   GWEN_DIALOG_PROPERTY prop,
                                   int index,
                                   const char *value,
                                   int doSignal) {
  GtkLabel *g;
  GWEN_BUFFER *tbuf;

  g=GTK_LABEL(GWEN_Widget_GetImplData(w, GTK3_DIALOG_WIDGET_REAL));
  assert(g);

  tbuf=GWEN_Buffer_new(0, 128, 0, 1);
  if (value && *value)
    Gtk3Gui_GetRawText(value, tbuf);

  switch(prop) {
  case GWEN_DialogProperty_Title:
    gtk_label_set_text(g, GWEN_Buffer_GetStart(tbuf));
    GWEN_Buffer_free(tbuf);
    return 0;
  default:
    break;
  }

  DBG_WARN(GWEN_LOGDOMAIN,
           "Function is not appropriate for this type of widget (%s)",
           GWEN_Widget_Type_toString(GWEN_Widget_GetType(w)));
  GWEN_Buffer_free(tbuf);
  return GWEN_ERROR_INVALID;
}

开发者ID:Gnucash，项目名称:gnucash，代码行数:31，代码来源:w_label.c

示例13: Gtk3Gui_WLabel_Setup

static int Gtk3Gui_WLabel_Setup(GWEN_WIDGET *w) {
  GtkWidget *g;
  const char *s;
  GWEN_WIDGET *wParent;
  GWEN_BUFFER *tbuf;

  wParent=GWEN_Widget_Tree_GetParent(w);
  s=GWEN_Widget_GetText(w, 0);

  tbuf=GWEN_Buffer_new(0, 128, 0, 1);
  if (s && *s)
    Gtk3Gui_GetRawText(s, tbuf);

  g=gtk_label_new(GWEN_Buffer_GetStart(tbuf));
  GWEN_Buffer_free(tbuf);
  GWEN_Widget_SetImplData(w, GTK3_DIALOG_WIDGET_REAL, (void*) g);
  GWEN_Widget_SetImplData(w, GTK3_DIALOG_WIDGET_CONTENT, (void*) g);

  GWEN_Widget_SetSetIntPropertyFn(w, Gtk3Gui_WLabel_SetIntProperty);
  GWEN_Widget_SetGetIntPropertyFn(w, Gtk3Gui_WLabel_GetIntProperty);
  GWEN_Widget_SetSetCharPropertyFn(w, Gtk3Gui_WLabel_SetCharProperty);
  GWEN_Widget_SetGetCharPropertyFn(w, Gtk3Gui_WLabel_GetCharProperty);

  if (wParent)
    GWEN_Widget_AddChildGuiWidget(wParent, w);

  return 0;
}

开发者ID:Gnucash，项目名称:gnucash，代码行数:28，代码来源:w_label.c

示例14: AB_Banking_GetSharedDataDir

int AB_Banking_GetSharedDataDir(const AB_BANKING *ab,
                                const char *name,
                                GWEN_BUFFER *buf){
  assert(ab);
  if (ab->dataDir) {
    GWEN_Buffer_AppendString(buf, ab->dataDir);
    GWEN_Buffer_AppendString(buf, DIRSEP "shared" DIRSEP);
    if (GWEN_Text_EscapeToBufferTolerant(name, buf)) {
      DBG_ERROR(AQBANKING_LOGDOMAIN,
		"Bad share name, aborting.");
      abort();
    }
    else {
      char *s;
  
      s=GWEN_Buffer_GetStart(buf);
      while(*s) {
	*s=tolower(*s);
	s++;
      }
    }
    return 0;
  }
  else {
    DBG_ERROR(AQBANKING_LOGDOMAIN, "No data dir (not init?)");
    return GWEN_ERROR_GENERIC;
  }
}

开发者ID:Zauberstuhl，项目名称:aqbanking，代码行数:28，代码来源:banking_cfg.c

示例15: LC_EgkCard_ReadInsuranceData

LC_CLIENT_RESULT LC_EgkCard_ReadInsuranceData(LC_CARD *card,
					      LC_HI_INSURANCE_DATA **pData) {
  GWEN_BUFFER *dbuf;
  LC_CLIENT_RESULT res;

  dbuf=GWEN_Buffer_new(0, 256, 0, 1);
  res=LC_EgkCard_ReadVd(card, dbuf);
  if (res!=LC_Client_ResultOk) {
    DBG_INFO(LC_LOGDOMAIN, "here (%d)", res);
    GWEN_Buffer_free(dbuf);
    return res;
  }
  else {
    GWEN_XMLNODE *root;

    root=GWEN_XMLNode_fromString(GWEN_Buffer_GetStart(dbuf),
				 GWEN_Buffer_GetUsedBytes(dbuf),
				 GWEN_XML_FLAGS_HANDLE_HEADERS |
				 GWEN_XML_FLAGS_HANDLE_NAMESPACES);
    if (root==NULL) {
      DBG_INFO(LC_LOGDOMAIN, "Invalid XML string");
      GWEN_Buffer_free(dbuf);
      return LC_Client_ResultDataError;
    }
    GWEN_Buffer_free(dbuf);

    GWEN_XMLNode_StripNamespaces(root);
    res=LC_EgkCard_ParseInsuranceData(root, pData);

    GWEN_XMLNode_free(root);
    return res;
  }
}

开发者ID:aqbanking，项目名称:libchipcard，代码行数:33，代码来源:egkcard.c

示例16: assert

const char *AB_ImExporterContext_GetLog(const AB_IMEXPORTER_CONTEXT *iec) {
  assert(iec);
  if (GWEN_Buffer_GetUsedBytes(iec->logs))
    return GWEN_Buffer_GetStart(iec->logs);
  else
    return NULL;
}

开发者ID:Zauberstuhl，项目名称:aqbanking，代码行数:7，代码来源:imexporter.c

示例17: GWEN_Padd_PaddWithPkcs1Bt1

int GWEN_Padd_PaddWithPkcs1Bt1(GWEN_BUFFER *buf, int dstSize) {
  unsigned int diff;
  char *p;

  if ((unsigned int)dstSize<GWEN_Buffer_GetUsedBytes(buf)) {
    DBG_ERROR(GWEN_LOGDOMAIN, "Buffer contains too much data");
    return GWEN_ERROR_INVALID;
  }
  diff=dstSize-GWEN_Buffer_GetUsedBytes(buf);
  if (diff<11) {
    /* honour minimum padding length for BT 1 of 8 bytes, plus the
     * leading and the trailing zero and the block type identifier */
    DBG_ERROR(GWEN_LOGDOMAIN,
              "Buffer contains too many bytes (diff is <11)");
    return GWEN_ERROR_INVALID;
  }

  /* reset position to 0 */
  GWEN_Buffer_Rewind(buf);
  if (GWEN_Buffer_InsertRoom(buf, diff)) {
    DBG_ERROR(GWEN_LOGDOMAIN, "Could not insert room for %d bytes", diff);
    return GWEN_ERROR_GENERIC;
  }

  p=GWEN_Buffer_GetStart(buf);
  *(p++)=0x00;
  *(p++)=0x01; /* block type 01 */
  if (diff>3) {
    memset(p, 0xff, diff-3);
    p+=diff-3;
  }
  *(p++)=0x00;

  return 0;
}

开发者ID:Zauberstuhl，项目名称:gwenhywfar，代码行数:35，代码来源:padd.c

示例18: GWEN_CryptMgr_Decode

int GWEN_CryptMgr_Decode(GWEN_CRYPTMGR *cm, const uint8_t *pData, uint32_t lData, GWEN_BUFFER *dbuf) {
  GWEN_BUFFER *tbuf;
  int rv;

  tbuf=GWEN_Buffer_new(0, lData, 0, 1);

  /* decrypt encrypted object */
  DBG_INFO(GWEN_LOGDOMAIN, "Decrypting data");
  rv=GWEN_CryptMgr_Decrypt(cm, pData, lData, tbuf);
  if (rv<0) {
    DBG_INFO(GWEN_LOGDOMAIN, "here (%d)", rv);
    GWEN_Buffer_free(tbuf);
    return rv;
  }

  /* verify signature, copy signed data to dbuf in the process */
  DBG_INFO(GWEN_LOGDOMAIN, "Verifying data");
  rv=GWEN_CryptMgr_Verify(cm,
                          (const uint8_t*)GWEN_Buffer_GetStart(tbuf),
                          GWEN_Buffer_GetUsedBytes(tbuf),
                          dbuf);
  GWEN_Buffer_free(tbuf);
  if (rv<0) {
    DBG_INFO(GWEN_LOGDOMAIN, "here (%d)", rv);
    return rv;
  }

  return 0;
}

开发者ID:Zauberstuhl，项目名称:gwenhywfar，代码行数:29，代码来源:cryptmgr.c

示例19: EB_Msg_WriteSignature

int EB_Msg_WriteSignature(EB_MSG *m, const unsigned char *hash, int hsize) {
  int rv;
  GWEN_BUFFER *hbuf;

  assert(m);
  assert(m->usage);

  if (hsize!=128) {
    DBG_ERROR(AQEBICS_LOGDOMAIN,
	      "Bad signature size (expected 128, was %d)",
	      hsize);
    return -1;
  }

  hbuf=GWEN_Buffer_new(0, 256, 0, 1);
  rv=GWEN_Base64_Encode(hash, (uint32_t) hsize, hbuf, 0);
  if (rv) {
    DBG_ERROR(AQEBICS_LOGDOMAIN,
	      "Could not base64-encode signature (%d)", rv);
    GWEN_Buffer_free(hbuf);
    return -1;
  }
  EB_Xml_SetCharValue(xmlDocGetRootElement(m->doc),
                      "AuthSignature/"
		      "ds:SignatureValue",
		      GWEN_Buffer_GetStart(hbuf));
  GWEN_Buffer_free(hbuf);

  return 0;
}

开发者ID:Zauberstuhl，项目名称:aqbanking，代码行数:30，代码来源:msg.c

示例20: AH_NewKeyFileDialog_HandleActivatedIniLetter

static int AH_NewKeyFileDialog_HandleActivatedIniLetter(GWEN_DIALOG *dlg) {
  AH_NEWKEYFILE_DIALOG *xdlg;
  int rv;
  GWEN_BUFFER *tbuf;


  assert(dlg);
  xdlg=GWEN_INHERIT_GETDATA(GWEN_DIALOG, AH_NEWKEYFILE_DIALOG, dlg);
  assert(xdlg);

  tbuf=GWEN_Buffer_new(0, 1024, 0, 1);

  /* add HTML version of the INI letter */
  GWEN_Buffer_AppendString(tbuf, "<html>");
  rv=AH_Provider_GetIniLetterHtml(AB_User_GetProvider(xdlg->user),
				  xdlg->user,
				  0,
				  0,
				  tbuf,
				  1);
  if (rv<0) {
    DBG_INFO(AQHBCI_LOGDOMAIN, "here (%d)", rv);
    // TODO: show error message
    AB_Banking_ClearCryptTokenList(xdlg->banking);
    GWEN_Buffer_free(tbuf);
    return GWEN_DialogEvent_ResultHandled;
  }
  GWEN_Buffer_AppendString(tbuf, "</html>");


  /* add ASCII version of the INI letter for frontends which don't support HTML */
  rv=AH_Provider_GetIniLetterTxt(AB_User_GetProvider(xdlg->user),
				 xdlg->user,
				 0,
				 0,
				 tbuf,
				 0);
  if (rv<0) {
    DBG_INFO(AQHBCI_LOGDOMAIN, "here (%d)", rv);
    // TODO: show error message
    AB_Banking_ClearCryptTokenList(xdlg->banking);
    GWEN_Buffer_free(tbuf);
    return GWEN_DialogEvent_ResultHandled;
  }

  rv=GWEN_Gui_Print(I18N("INI Letter"),
		    "HBCI-INILETTER",
		    I18N("INI Letter for HBCI"),
		    GWEN_Buffer_GetStart(tbuf),
		    0);
  if (rv<0) {
    DBG_INFO(AQHBCI_LOGDOMAIN, "here (%d)", rv);
    // TODO: show error message
    GWEN_Buffer_free(tbuf);
    return GWEN_DialogEvent_ResultHandled;
  }

  GWEN_Buffer_free(tbuf);
  return GWEN_DialogEvent_ResultHandled;
}

开发者ID:Zauberstuhl，项目名称:aqbanking，代码行数:60，代码来源:dlg_newkeyfile.c

注：本文中的GWEN_Buffer_GetStart函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GWEN_Buffer_free函数代码示例发布时间：2022-05-30

C++ GWEN_Buffer_AppendString函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19189|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GWEN_Buffer_GetStart函数代码示例

示例1: GWEN_Buffer_AppendString

示例2: GWEN_Directory_FindPathForFile

示例3: GWEN_Gui_CProgress_Log

示例4: GWEN_Buffer_AppendString

示例5: AB_Value_toHbciString

示例6: GWEN_PathManager_FindFile

示例7: LC_EgkCard_ReadRawPd

示例8: _dumpBal

示例9: GWEN_PathManager_GetMatchingFilesRecursively

示例10: AIO_OfxGroup_STATUS_AddData

示例11: GWEN_Padd_UnpaddWithIso9796_2

示例12: Gtk3Gui_WLabel_SetCharProperty

示例13: Gtk3Gui_WLabel_Setup

示例14: AB_Banking_GetSharedDataDir

示例15: LC_EgkCard_ReadInsuranceData

示例16: assert

示例17: GWEN_Padd_PaddWithPkcs1Bt1

示例18: GWEN_CryptMgr_Decode

示例19: EB_Msg_WriteSignature

示例20: AH_NewKeyFileDialog_HandleActivatedIniLetter

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2115

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053