• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ GUI_TextSelectHelper函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GUI_TextSelectHelper函数的典型用法代码示例。如果您正苦于以下问题:C++ GUI_TextSelectHelper函数的具体用法?C++ GUI_TextSelectHelper怎么用?C++ GUI_TextSelectHelper使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GUI_TextSelectHelper函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ELEM_TYPE

static const char *dlgts_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    int idx = (long)data;
    int type = ELEM_TYPE(pc->elem[idx]);
    switch (type) {
        case ELEM_SMALLBOX:
        case ELEM_BIGBOX:
        {
            u8 changed = 0;
            pc->elem[idx].src = GUI_TextSelectHelper(pc->elem[idx].src, 0, NUM_RTC + NUM_TELEM + NUM_TIMERS + NUM_CHANNELS, dir, 1, 1, &changed);
            if(changed && dir) {
                pc->elem[idx].src = _adjust_src_for_telemetry(pc->elem[idx].src, dir);
            }
            return GetBoxSource(tempstring, pc->elem[idx].src);
        }
        case ELEM_BAR:
            pc->elem[idx].src = GUI_TextSelectHelper(pc->elem[idx].src, 0, NUM_CHANNELS, dir, 1, 1, NULL);
            return INPUT_SourceName(tempstring, pc->elem[idx].src ? pc->elem[idx].src + NUM_INPUTS : 0);
        case ELEM_TOGGLE:
        {
            pc->elem[idx].src = INPUT_SelectAbbrevSource(pc->elem[idx].src, dir);
            return INPUT_SourceNameAbbrevSwitch(tempstring, pc->elem[idx].src);
        }
        case ELEM_HTRIM:
        case ELEM_VTRIM:
            pc->elem[idx].src = GUI_TextSelectHelper(pc->elem[idx].src, 0, NUM_TRIMS, dir, 1, 1, NULL);
            if (pc->elem[idx].src == 0)
                return _tr("None");
            snprintf(tempstring, sizeof(tempstring), "%s%d", _tr("Trim"),pc->elem[idx].src);
            return tempstring;
    }
    return _tr("None");
}
开发者ID:TheSFReader,项目名称:deviation,代码行数:34,代码来源:_main_config.c


示例2: MIXER_SRC_IS_INV

const char *set_drsource_cb(guiObject_t *obj, int dir, void *data)
{
    (void) obj;
    u8 *source = (u8 *)data;
    u8 is_neg = MIXER_SRC_IS_INV(*source);
    u8 changed;
    u8 oldsrc = *source;
    *source = GUI_TextSelectHelper(MIXER_SRC(*source), 0, NUM_SOURCES, dir, 1, 1, &changed);
    MIXER_SET_SRC_INV(*source, is_neg);
    if (changed) {
        sync_mixers();
        if ((!! MIXER_SRC(oldsrc)) ^ (!! MIXER_SRC(*source))) {
            // bug fix (issues #191) : only invoke _update_rate_widgets() for expo template
            if (mp->cur_template == MIXERTEMPLATE_EXPO_DR) {
                if(data == &mp->mixer[1].sw)
                    _update_rate_widgets(0);
                else if(data == &mp->mixer[2].sw)
                    _update_rate_widgets(1);
            }
        } else {    
            MIXPAGE_RedrawGraphs();
        }
    }
    GUI_TextSelectEnablePress((guiTextSelect_t *)obj, MIXER_SRC(*source));
    return INPUT_SourceName(mp->tmpstr, *source);
}
开发者ID:caoqing32,项目名称:deviation,代码行数:26,代码来源:_mixer_setup.c


示例3: GUI_TextSelectHelper

static const char *ratesel_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    (void)data;
    dlog->rate = GUI_TextSelectHelper(dlog->rate, 0, DLOG_RATE_LAST-1, dir, 1, 1, NULL);
    return DATALOG_RateString(dlog->rate);
}
开发者ID:supermk2,项目名称:Deviation,代码行数:7,代码来源:_datalog_page.c


示例4: GUI_TextSelectHelper

static const char *gyro_output_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    (void)data;
    u8 changed = 1;
    gyro_output = GUI_TextSelectHelper(gyro_output, GYROOUTPUT_GEAR , GYROOUTPUT_AUX2, dir, 2, 2, &changed);
    if (changed) {  // switch gyro output between the gear and the aux2
        // firstly: dynamically create mixes for target gyro channel
        int i;
        for (i = 0; i < GYROMIXER_COUNT; i ++) {
            if(! mp->mixer_ptr[i])
                break;
            mp->mixer[i] = *mp->mixer_ptr[i];
            mp->mixer[i].dest = gyro_output;
        }
        MIXER_SetTemplate(gyro_output, MIXERTEMPLATE_EXPO_DR);
        // secondly: clear mix for original gyro channel
        MIXER_SetTemplate(gyro_output == GYROOUTPUT_GEAR ? GYROOUTPUT_AUX2 : GYROOUTPUT_GEAR, MIXERTEMPLATE_NONE);
        // save mixers
        MIXER_SetMixers(mp->mixer, i);
        // reload mixers because order may change
        int count = STDMIX_GetMixers(mp->mixer_ptr, gyro_output, GYROMIXER_COUNT);
        convert_output_to_percentile();
        for (i = 0; i < count; i ++) {
            GUI_Redraw(&gui->gyro[i]);
        }
    }
    if (gyro_output == GYROOUTPUT_GEAR)
        snprintf(tempstring, sizeof(tempstring), "%s/%s5", _tr("GEAR"), _tr("Ch"));
    else
        snprintf(tempstring, sizeof(tempstring), "%s/%s7", _tr("AUX2"), _tr("Ch"));
    return tempstring;
}
开发者ID:Chen-Leon,项目名称:DeviationX,代码行数:33,代码来源:_gyrosense_page.c


示例5: MIXER_MUX

const char *set_mux_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    (void)data;
    u8 changed;
    u8 mux = MIXER_MUX(mp->cur_mixer);
    mux = GUI_TextSelectHelper(mux, MUX_REPLACE, MUX_LAST-1, dir, 1, 1, &changed);
    if (changed) {
        MIXER_SET_MUX(mp->cur_mixer, mux);
        MIXPAGE_RedrawGraphs();
        sync_mixers();
    }
    switch(mux) {
    case MUX_REPLACE:
        return _tr("replace");
    case MUX_MULTIPLY:
        return _tr("mult");
    case MUX_ADD:
        return _tr("add");
    case MUX_MAX:
        return _tr("max");
    case MUX_MIN:
        return _tr("min");
    case MUX_DELAY:
        return _tr("delay");
    case MUX_LAST:
        break;
    }
    return "";
}
开发者ID:robotjackie,项目名称:deviation,代码行数:30,代码来源:_mixer_setup.c


示例6: GUI_TextSelectHelper

const char *newelem_cb(guiObject_t *obj, int dir, void *data)
{   
    (void)data;
    (void)obj;
    lp.newelem = GUI_TextSelectHelper(lp.newelem, 0, ELEM_LAST-1, dir, 1, 1, NULL);
    return GetElemName(lp.newelem);
}
开发者ID:caoqing32,项目名称:deviation,代码行数:7,代码来源:_main_config.c


示例7: INPUT_SourceName

static const char *set_source_cb(guiObject_t *obj, int dir, void *data)
{
    (void) obj;
    u8 *source = (u8 *)data;
    *source = GUI_TextSelectHelper(MIXER_SRC(*source), 0, NUM_SOURCES, dir, 1, 1, NULL);
    return INPUT_SourceName(tp->tmpstr, MIXER_MapChannel(*source));
}
开发者ID:caoqing32,项目名称:deviation,代码行数:7,代码来源:_trim_page.c


示例8: GUI_TextSelectHelper

static const char *rtc_display_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    (void)data;
    Transmitter.clock12hr = GUI_TextSelectHelper(Transmitter.clock12hr, 0, 1, dir, 1, 4, NULL);
    return Transmitter.clock12hr ? _tr("12 hour") : _tr("24 hour");
}
开发者ID:caoqing32,项目名称:deviation,代码行数:7,代码来源:rtc_config.c


示例9: GUI_TextSelectHelper

static const char *throhold_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    (void)data;
    u8 changed = 1;
    u8 throhold_state = 0;
    if (Model.limits[mapped_std_channels.throttle].safetysw)
        throhold_state = 1; // here we set it either 1 or 0
    throhold_state = GUI_TextSelectHelper(throhold_state, 0, 1, dir, 1, 1, &changed);
    if (changed) {
        if (throhold_state == 1) {
            Model.limits[mapped_std_channels.throttle].safetysw = // bug fix: must use inverse position for hold switch
                    mapped_std_channels.switches[SWITCHFUNC_HOLD]
                         ? 0x80 | mapped_std_channels.switches[SWITCHFUNC_HOLD] // inverse of '0'
                         : 0;
            if (Model.limits[mapped_std_channels.throttle].safetyval == 0)
                Model.limits[mapped_std_channels.throttle].safetyval = -110;
        } else
            Model.limits[mapped_std_channels.throttle].safetysw = 0;
    }
    if (throhold_state == 1) {
        strcpy(mp->tmpstr, (const char *)_tr("On"));
        GUI_TextSelectEnable(&gui->value, 1);
    }
    else {
        strcpy(mp->tmpstr, (const char *)_tr("Off"));
        GUI_TextSelectEnable(&gui->value, 0);
    }
    return mp->tmpstr;
}
开发者ID:caoqing32,项目名称:deviation,代码行数:30,代码来源:_throhold_page.c


示例10: GUI_TextSelectHelper

static const char *_vibration_state_cb(guiObject_t *obj, int dir, void *data)
{
    (void)data;
    (void)obj;
    Transmitter.vibration_state = GUI_TextSelectHelper(Transmitter.vibration_state, 0, 1, dir, 1, 1, NULL);
    return Transmitter.vibration_state ? "On" : "Off";
}
开发者ID:DeviationTX,项目名称:deviation,代码行数:7,代码来源:tx_configure.c


示例11: _tr

static const char *swashmix_val_cb(guiObject_t *obj, int dir, void *data)
{
    (void)data;
    if (!GUI_IsTextSelectEnabled(obj))
        return _tr("None");
    int i = (long)data;
    u8 changed = 1;
    swashmix[i] = GUI_TextSelectHelper(swashmix[i], -100, 100, dir, 1, 5, &changed);
    if (changed) {
        u8 mask = SWASH_INV_ELEVATOR_MASK;
        switch (i) {
        case 0: // aile
            mask = SWASH_INV_AILERON_MASK;
            break;
        case 1:  // elev
            mask = SWASH_INV_ELEVATOR_MASK;
            break;
        default:  // pit
            mask = SWASH_INV_COLLECTIVE_MASK;
            break;
        }
        if (swashmix[i] >= 0) {
            Model.swashmix[i] = swashmix[i];
            Model.swash_invert = Model.swash_invert & ~mask;
        } else  {
            Model.swashmix[i] = -swashmix[i];
            Model.swash_invert = Model.swash_invert | mask;
        }
    }
    sprintf(tempstring, "%d", swashmix[i]);
    return tempstring;
}
开发者ID:Chen-Leon,项目名称:DeviationX,代码行数:32,代码来源:_swash_page.c


示例12: GUI_TextSelectHelper

static const char *swash_val_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    (void)data;
    u8 changed = 1;
    Model.swash_type = GUI_TextSelectHelper(Model.swash_type, SWASH_TYPE_NONE , SWASH_TYPE_90, dir, 1, 1, &changed);
    if (changed)
        update_swashmixes();
    switch(Model.swash_type) {
        case SWASH_TYPE_NONE:
            snprintf(tempstring, sizeof(tempstring), "1%s", _tr("Servo"));
            break;
        case SWASH_TYPE_120:
            snprintf(tempstring, sizeof(tempstring), "3%s 120", _tr("Servo"));
            break;
        case SWASH_TYPE_120X:
            snprintf(tempstring, sizeof(tempstring), "3%s 120x", _tr("Servo"));
            break;
        case SWASH_TYPE_140:
            snprintf(tempstring, sizeof(tempstring), "3%s 140", _tr("Servo"));
            break;
        case SWASH_TYPE_90:
            snprintf(tempstring, sizeof(tempstring), "3%s 90", _tr("Servo"));
            break;
        default:
            break;
    }
    return tempstring;
}
开发者ID:Chen-Leon,项目名称:DeviationX,代码行数:29,代码来源:_swash_page.c


示例13: strcpy

const char *set_source_cb(guiObject_t *obj, int dir, void *data)
{
    (void) obj;
    u8 *source = (u8 *)data;
    if (!GUI_IsTextSelectEnabled(obj) ) {
        strcpy(mp->tmpstr, _tr("None"));
        return mp->tmpstr;
    }
    u8 is_neg = MIXER_SRC_IS_INV(*source);
    u8 changed;
    *source = GUI_TextSelectHelper(MIXER_SRC(*source), 1, NUM_SOURCES, dir, 1, 1, &changed);
    MIXER_SET_SRC_INV(*source, is_neg);
    if (changed) {
        if(mp->cur_template == MIXERTEMPLATE_COMPLEX) {
            guiObject_t *trim = _get_obj(COMPLEX_TRIM, 0);
            if(trim) {
                if (MIXER_SourceHasTrim(MIXER_SRC(mp->mixer[0].src)))
                    GUI_SetHidden(trim, 0);
                else
                    GUI_SetHidden(trim, 1);
            }
        }
        sync_mixers();
        MIXPAGE_RedrawGraphs();
    }
    GUI_TextSelectEnablePress((guiTextSelect_t *)obj, MIXER_SRC(*source));
    return INPUT_SourceName(mp->tmpstr, *source);
}
开发者ID:caoqing32,项目名称:deviation,代码行数:28,代码来源:_mixer_setup.c


示例14: GUI_TextSelectHelper

const char *newelem_cb(guiObject_t *obj, int dir, void *data)
{   
    (void)data;
    (void)obj;
    const int last_elem = (HAS_TOUCH) ? ELEM_BATTERY : ELEM_LAST; //FIXME
    lp->newelem = GUI_TextSelectHelper(lp->newelem, 0, last_elem-1, dir, 1, 1, NULL);
    return GetElemName(lp->newelem);
}
开发者ID:TheSFReader,项目名称:deviation,代码行数:8,代码来源:_main_config.c


示例15: GUI_TextSelectHelper

static const char *modeselect_cb(guiObject_t *obj, int dir, void *data)
{
    (void)data;
    (void)obj;
    Transmitter.mode = GUI_TextSelectHelper(Transmitter.mode, MODE_1, MODE_4, dir, 1, 1, NULL);
    snprintf(tempstring, sizeof(tempstring), _tr("Mode %d"), Transmitter.mode);
    return tempstring;
}
开发者ID:Chen-Leon,项目名称:DeviationX,代码行数:8,代码来源:_tx_configure.c


示例16: GUI_TextSelectHelper

static const char *numchanselect_cb(guiObject_t *obj, int dir, void *data)
{
    (void)data;
    (void)obj;
    Model.num_channels = GUI_TextSelectHelper(Model.num_channels, 1, PROTOCOL_NumChannels(), dir, 1, 1, NULL);
    sprintf(tempstring, "%d", Model.num_channels);
    return tempstring;
}
开发者ID:TheSFReader,项目名称:deviation,代码行数:8,代码来源:_model_page.c


示例17: sprintf

const char *PAGEMIXER_SetNumberCB(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    s8 *value = (s8 *)data;
    *value = GUI_TextSelectHelper(*value, -100, 100, dir, 1, LONG_PRESS_STEP, NULL);
    sprintf(mp->tmpstr, "%d", *value);
    return mp->tmpstr;
}
开发者ID:caoqing32,项目名称:deviation,代码行数:8,代码来源:_mixer_setup.c


示例18: _tr

const char *set_trim_cb(guiObject_t *obj, int dir, void *data)
{
    if(! GUI_IsTextSelectEnabled(obj)){
        return _tr("None");
    }
    u8 *button = (u8 *)data;
    *button = GUI_TextSelectHelper(*button, 0, NUM_TX_BUTTONS, dir, 1, 1, NULL);
    return INPUT_ButtonName(*button);
}
开发者ID:caoqing32,项目名称:deviation,代码行数:9,代码来源:_trim_page.c


示例19: GUI_TextSelectHelper

static const char *iconstr_cb(guiObject_t *obj, int dir, void *data)
{
    (void)obj;
    long num_icons = (long)data;
    u8 changed;
    mp->selected = GUI_TextSelectHelper(mp->selected, 1, num_icons, dir, 1, 1, &changed);
    if (changed)
        select_cb(NULL, mp->selected-1, (void *)LOAD_ICON);
    return string_cb(mp->selected-1, (void *)LOAD_ICON);
}
开发者ID:robotjackie,项目名称:deviation,代码行数:10,代码来源:model_loadsave.c


示例20: _tr

static const char *powerselect_cb(guiObject_t *obj, int dir, void *data)
{
    (void)data;
    (void)obj;
    if(! PROTOCOL_HasPowerAmp(Model.protocol))
        return _tr("Default");
    Model.tx_power = GUI_TextSelectHelper(Model.tx_power, TXPOWER_100uW, TXPOWER_LAST-1, dir, 1, 1, NULL);
    mp->last_txpower = Model.tx_power;
    return RADIO_TX_POWER_VAL[Model.tx_power];
}
开发者ID:TheSFReader,项目名称:deviation,代码行数:10,代码来源:_model_page.c



注:本文中的GUI_TextSelectHelper函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ GUI_UNLOCK函数代码示例发布时间:2022-05-30
下一篇:
C++ GUI_SetTextMode函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap