• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ GUI_Clear函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GUI_Clear函数的典型用法代码示例。如果您正苦于以下问题：C++ GUI_Clear函数的具体用法？C++ GUI_Clear怎么用？C++ GUI_Clear使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GUI_Clear函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: _OnPaint_drowise

/**
  * @brief  Paints button
  * @param  hObj: button handle
  * @retval None
  */
static void _OnPaint_drowise(BUTTON_Handle hObj) {
  int Index;
  
  GUI_SetBkColor(FRAMEWIN_GetDefaultClientColor());
  GUI_Clear();

  Index = (WIDGET_GetState(hObj) & BUTTON_STATE_PRESSED) ? 1 : 0;
  
  if(Index)
  {
    GUI_DrawBitmap(&bmdes_water_sub, 0, 0);
  }
  else
  {
    GUI_DrawBitmap(&bmwater_sub, 0, 0);
  }
}
开发者ID:vlsi1217，项目名称:STM32F7Cube，代码行数:22，代码来源:gardening_control_win.c


示例2: _cbBkWindow

/*********************************************************************
*
*       _cbBkWindow
*/
static void _cbBkWindow(WM_MESSAGE * pMsg) {
    int xPos, yPos;
    xPos = LCD_GetXSize() / 2 - bmSeggerLogoBlue.XSize/2;
    yPos = LCD_GetYSize() / 2 - bmSeggerLogoBlue.YSize/2 ;
    switch (pMsg->MsgId) {
    case WM_PAINT:
        //GUI_SelectLayer(LAYER);
        GUI_SetBkColor(GUI_BLUE);
        GUI_Clear();
        GUI_SetColor(GUI_WHITE);
        GUI_SetFont(&GUI_Font24_ASCII);
        GUI_DispStringHCenterAt("DIALOG_SliderColor - Sample", 160, 5);
        GUI_DrawBitmap(&bmSeggerLogoBlue, xPos, yPos );
    default:
        WM_DefaultProc(pMsg);
    }
}
开发者ID:dadianxukong，项目名称:gps，代码行数:21，代码来源:Task_0.c


示例3: _cbBkWindow

/*********************************************************************
*
*       _cbBkWindow
*/
static void _cbBkWindow(WM_MESSAGE * pMsg) {
  int i;
  switch (pMsg->MsgId) {
  case WM_PAINT:
    GUI_SetBkColor(GUI_BLUE);
    GUI_Clear();
    GUI_SetColor(GUI_WHITE);
    GUI_SetFont(&GUI_Font24_ASCII);
    GUI_DispStringHCenterAt("Counting Sample", 160, 5);
    GUI_SetFont(&GUI_Font8x16);
    for (i = 0; i < GUI_COUNTOF(_asExplain); i++) {
      GUI_DispStringAt(_asExplain[i], 5, 40 + i * 16);
    }
  default:
    WM_DefaultProc(pMsg);
  }
}
开发者ID:caicry，项目名称:uFrame，代码行数:21，代码来源:DIALOG_Count.c


示例4: GUIDEMO_Cursor

void GUIDEMO_Cursor(void) {
  int i = 0;
  GUIDEMO_ShowIntro("Cursor",
                    "\nuC/GUI supports"
                    "\nsoftware cursor");
  GUI_SetBkColor(GUI_BLUE);
  GUI_Clear();
  _DispCursor();
  GUIDEMO_Delay(2000);
  GUIDEMO_NotifyStartNext();
  GUI_CURSOR_Show(); 
  for ( i = 0;(i < countof(_aCursor) && !GUIDEMO_CheckCancel()); i++) {
      _MoveCursor(_aCursor[i]);
  }
  GUI_CURSOR_SetPosition(0,0);
  GUI_CURSOR_Select(&GUI_CursorArrowM);  
}
开发者ID:DlutLiuZhao，项目名称:UCGUI，代码行数:17，代码来源:GUIDEMO_Cursor.c


示例5: Paint

static void Paint(TERMINAL_Obj* pObj/*, GUI_RECT*pRect*/) {
  char*s = (char*) WM_HMEM2Ptr(pObj->hpText);
  GUI_RECT rClient;
  GUI_DEBUG_LOG("TERMINAL: Paint(..)\n");
  GUI_GetClientRect(&rClient);
/* Draw background */
  GUI_SetBkColor (GUI_WHITE/*pObj->aBkColor[0]*/);
  GUI_SetColor   (GUI_BLACK /*pObj->aTextColor[0]*/);
  GUI_Clear();
/* Draw the text */  
  {
    GUI_RECT rText = rClient;
    rText.x0 +=3;
//    GUI_SetFont    (pObj->pFont);
    GUI_DispStringInRect(s, &rText, GUI_TA_LEFT);
  }
}
开发者ID:byxob，项目名称:calendar，代码行数:17，代码来源:Terminal.c


示例6: _OnPaint_fullscreen

/**
  * @brief  Paints Full Screen button
  * @param  hObj: button handle
  * @retval None
  */
static void _OnPaint_fullscreen(BUTTON_Handle hObj) {
  int Index;

  GUI_SetBkColor(FRAMEWIN_GetDefaultClientColor());
  GUI_Clear();
  
  Index = (WIDGET_GetState(hObj) & BUTTON_STATE_PRESSED) ? 1 : 0;

  if(Index)
  {
    GUI_DrawBitmap(&bmwindowfullscreen, 0, 0);
  }
  else
  {
    GUI_DrawBitmap(&bmwindownofullscreen, 0, 0);
  }
}
开发者ID:451506709，项目名称:automated_machine，代码行数:22，代码来源:videoplayer_win.c


示例7: GUIDEMO_Graph

void GUIDEMO_Graph(void) {
  #if GUIDEMO_LARGE
    _YSize = (LCD_YSIZE - 100);
  #else
    _YSize = (LCD_YSIZE -  30);
  #endif
  GUIDEMO_ShowIntro("Drawing a graph",
                    "\nOptimized drawing routine"
                    "\nfor drawing graph data");
  GUI_Clear();
  _Label();
  _DemoRandomGraph();
  GUIDEMO_NotifyStartNext();
  _DemoSineWave();
  GUIDEMO_NotifyStartNext();
  _DemoOrData();
}
开发者ID:DlutLiuZhao，项目名称:UCGUI，代码行数:17，代码来源:GUIDEMO_Graph.c


示例8: _OnPaint_next

/**
  * @brief  Paints Next button
  * @param  hObj: button handle
  * @retval None
  */
static void _OnPaint_next(BUTTON_Handle hObj) {
  int Index;

  GUI_SetBkColor(FRAMEWIN_GetDefaultClientColor());
  GUI_Clear();
  
  Index = (WIDGET_GetState(hObj) & BUTTON_STATE_PRESSED) ? 1 : 0;

  if(Index)
  {
    GUI_DrawBitmap(&bmnext_pressed, 0, 0);
  }
  else
  {
    GUI_DrawBitmap(&bmnext_not_pressed, 0, 0);
  }
}
开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:22，代码来源:audioplayer_win.c


示例9: _cbBkWindow

/*******************************************************************
*
*       _cbBkWindow
*/
static void _cbBkWindow(WM_MESSAGE* pMsg) {
  switch (pMsg->MsgId) {
  case MSG_CHANGE_TEXT:
    strcpy(_acInfoText, pMsg->Data.p);
  case WM_PAINT:
    GUI_SetBkColor(GUI_BLACK);
    GUI_Clear();
    GUI_SetColor(GUI_WHITE);
    GUI_SetFont(&GUI_Font24_ASCII);
    GUI_DispStringHCenterAt("WindowManager - Sample", 160, 5);
    GUI_SetFont(&GUI_Font8x16);
    GUI_DispStringAt(_acInfoText, 5, 40);
    break;
  default:
    WM_DefaultProc(pMsg);
  }
}
开发者ID:ChijunShen，项目名称:wildfire_stm32_iso，代码行数:21，代码来源:GUIDEMO_WM.c


示例10: _Main

/*********************************************************************
*
*       _Main
*/
static void _Main(void) {
  int xSize;
  int ySize;

  WM_SelectWindow(WM_HBKWIN);
  GUI_Clear();
  #if (GUI_SUPPORT_CURSOR | GUI_SUPPORT_TOUCH)
    GUI_CURSOR_Show();
  #endif
  //
  // Create and configure Control and Information window
  //
  xSize           = LCD_GetXSize();
  ySize           = LCD_GetYSize();
  _hDialogControl = GUI_CreateDialogBox(_aFrameWinControl, GUI_COUNTOF(_aFrameWinControl), &_cbFrameWinControl, WM_HBKWIN, xSize - CONTROL_SIZE_X, ySize - CONTROL_SIZE_Y);
  _hDialogInfo    = GUI_CreateDialogBox(_aFrameWinInfo,    GUI_COUNTOF(_aFrameWinInfo),    &_cbFrameWinInfo,    WM_HBKWIN, (xSize >> 1) - 1,       0);
  WM_HideWindow(_hDialogInfo);
  //
  // Show Intro
  //
  WM_InvalidateWindow(_hDialogControl);
  WM_DisableMemdev(WM_HBKWIN);
  GUI_Exec();
  WM_EnableMemdev(WM_HBKWIN);
  GUIDEMO_Intro();
  //
  // Run the demos
  //
  for (_iDemo = 0; _GUIDemoConfig.apFunc[_iDemo]; _iDemo++) {
    _ClearHalt();
    GUIDEMO_UpdateControlText();
    (*_GUIDemoConfig.apFunc[_iDemo])();
    _iDemoMinor = 0;
    _Pressed    = 0;
  }
  _iDemo = 0;
  //
  // Cleanup
  //
  WM_DeleteWindow(_hDialogControl);
  WM_DeleteWindow(_hDialogInfo);
  #if (GUI_SUPPORT_CURSOR | GUI_SUPPORT_TOUCH)
    GUI_CURSOR_Hide();
  #endif
}
开发者ID:charlestac，项目名称:smileos，代码行数:49，代码来源:GUIDEMO.c


示例11: _cbDemoCallback2

/*******************************************************************
*
*       _cbDemoCallback2
*/
static void _cbDemoCallback2(WM_MESSAGE * pMsg) {
  int x;
  int y;

  switch (pMsg->MsgId) {
  case WM_PAINT:
    GUI_SetBkColor(GUI_MAGENTA);
    GUI_Clear();
    GUI_SetColor(GUI_YELLOW);
    GUI_SetFont(&GUI_FontComic18B_1);
    x = WM_GetWindowSizeX(pMsg->hWin);
    y = WM_GetWindowSizeY(pMsg->hWin);
    GUI_DispStringHCenterAt("Window 2\nanother Callback", x / 2, (y / 4) - 18);
    break;
  default:
    WM_DefaultProc(pMsg);
  }
}
开发者ID:xinshaochen，项目名称:emWin，代码行数:22，代码来源:WM_Sample.c


示例12: _OnPaint

/*********************************************************************
*
*       _OnPaint
*/
static void _OnPaint(void) {
  int xPos = 0;
  GUI_RECT Rect;
  GUI_SetBkColor(GUI_GRAY);
  GUI_Clear();
  WM_GetClientRect(&Rect);
  Rect.x1 = HEADER_GetItemWidth(_hHeader, 0);
  GUI_SetColor(GUI_RED);
  GUI_FillRect(Rect.x0, Rect.y0, Rect.x1, Rect.y1);
  Rect.x0 = Rect.x1;
  Rect.x1 += HEADER_GetItemWidth(_hHeader, 1);
  GUI_SetColor(GUI_GREEN);
  GUI_FillRect(Rect.x0, Rect.y0, Rect.x1, Rect.y1);
  Rect.x0 = Rect.x1;
  Rect.x1 += HEADER_GetItemWidth(_hHeader, 2);
  GUI_SetColor(GUI_BLUE);
  GUI_FillRect(Rect.x0, Rect.y0, Rect.x1, Rect.y1);
}
开发者ID:huangfeng007，项目名称:ChuangKeUnion-1st，代码行数:22，代码来源:WIDGET_Header.c


示例13: _OnPaint_repeat

/**
  * @brief  Paints repeat button
  * @param  repeat_status: repeat button status
  * @retval None
  */
static void _OnPaint_repeat(uint32_t repeat_status) {
  
  GUI_SetBkColor(FRAMEWIN_GetDefaultClientColor());
  GUI_Clear();
    
  if(PlayerSettings.b.repeat == REPEAT_NONE)
  {
    GUI_DrawBitmap(&bmrepeat_off, 0, 0);
  }
  else if(PlayerSettings.b.repeat == REPEAT_ONCE)
  {
    GUI_DrawBitmap(&bmrepeat1, 0, 0);
  }
  else if(PlayerSettings.b.repeat == REPEAT_ALL)
  {
    GUI_DrawBitmap(&bmrepeat_all, 0, 0);
  }
}
开发者ID:eemei，项目名称:library-stm32f4，代码行数:23，代码来源:videoplayer_win.c


示例14: _Main

static void _Main(void) {
  WM_SelectWindow(WM_HBKWIN);
  GUI_Clear();

  WM_InvalidateWindow(_hDialogControl);
  WM_DisableMemdev(WM_HBKWIN);
  GUI_Exec();
  WM_EnableMemdev(WM_HBKWIN);
	
  GUIDEMO_Intro();
  GUIDEMO_TransparentDialog();
  GUIDEMO_Graph();	
  GUIDEMO_ColorBar();
			
  _iDemo = 0;

  WM_DeleteWindow(_hDialogControl);
}
开发者ID:cyysu，项目名称:AliOS-Things，代码行数:18，代码来源:GUIDEMO.c


示例15: _cbDesktop

/*********************************************************************
*
*       _cbDesktop
*
* Purpose:
*   This routine handles the drawing of the desktop window.
*/
static void _cbDesktop(WM_MESSAGE * pMsg) {
  int i;
  switch (pMsg->MsgId) {
  case WM_PAINT:
    GUI_SetBkColor(GUI_RED);
    GUI_Clear();
    GUI_SetFont(&GUI_Font24_ASCII);
    GUI_DispStringHCenterAt(_aTitle, 160, 5);
    GUI_DispNextLine();
    GUI_SetFont(GUI_DEFAULT_FONT);
    GUI_DispNextLine();
    for (i = 0; i < GUI_COUNTOF(_apExplain); i++) {
      GUI_DispStringHCenterAt(_apExplain[i], 160, GUI_GetDispPosY());
      GUI_DispNextLine();
    }
    break;
  }
}
开发者ID:qiurenguo2014，项目名称:youjiesun，代码行数:25，代码来源:WIDGET_NumPad.c


示例16: Hello_MSG

void Hello_MSG(void) {

	GUI_SetColor(GUI_BLUE);
	GUI_SetFont(&GUI_Font16_1);
	GUI_DispStringHCenterAt("Oscyloskop cyfrowy v1.1" , 240, 150);
	GUI_DispStringHCenterAt("Adrian Kurylak" , 240, 175);
	GUI_DispStringHCenterAt("Politechnika Wroclawska" , 240, 200);
	GUI_SetFont(&GUI_Font32_1);
	GUI_DispStringHCenterAt("Inicjalizacja" , 240, 120);
	osDelay(250);
	GUI_DispStringHCenterAt("Inicjalizacja." , 240, 120);
	osDelay(500);
	GUI_DispStringHCenterAt("Inicjalizacja.." , 240, 120);
	osDelay(500);
	GUI_DispStringHCenterAt("Inicjalizacja..." , 240, 120);
	osDelay(750);
	GUI_Clear();
}
开发者ID:AdrK，项目名称:STM32F7_MULTITHREAD，代码行数:18，代码来源:main.c


示例17: Display_wait

void Display_wait(u8 datain)
{
	GUI_SetBkColor(GUI_BLACK);
	GUI_Clear();
	DisplayBattery();
	GUI_SetColor(GUI_CYAN);
	
	if(datain==0)
	{
  	GUI_DispStringAt("正在验证白酒",12,20);
  	GUI_DispStringAt("防伪信息 Wait...",0,40);	
	}
	else
	{
  	GUI_DispStringAt("正在生成在线",12,20);
		GUI_DispStringAt("识别信息 Wait...",0,40);
	}
}
开发者ID:gaodebang，项目名称:stm32f103-eval，代码行数:18，代码来源:display.c


示例18: cbBackWin

static WM_RESULT cbBackWin( WM_MESSAGE* pMsg) {
  WM_KEY_INFO* pKeyInfo;
  switch (pMsg->MsgId) {
  case WM_KEY:
    pKeyInfo = (WM_KEY_INFO*)pMsg->Data.p;
    if (pKeyInfo->PressedCnt == 0) {
      GUI_StoreKey(pKeyInfo->Key);
    }
    break;
  case WM_PAINT:
    if (WM__BkColor != GUI_INVALID_COLOR) {
      GUI_SetBkColor(WM__BkColor);
      GUI_Clear();
    }
  default:
    WM_DefaultProc(pMsg);
  }
}
开发者ID:uKingSky，项目名称:KingSky，代码行数:18，代码来源:wm.c


示例19: _cbClock

static void  _cbClock(WM_MESSAGE *pMsg)
{
	int NCode, Id;
	//PARAM pParam;
	switch (pMsg->MsgId)
	{
	case WM_PAINT:
		GUI_SetBkColor(GUI_WHITE); 
		GUI_Clear();
		GUI_SetColor(GUI_BLACK);
		_ShowButton(pMsg->hWin);
		GUI_DrawBitmap(&bmwatch, 37, 0);

		//GUI_AA_FillPolygon(pParam.aPoint1, GUI_COUNTOF(_aNeedle[0]), MAG * LCD_GetXSize() / 2, MAG * (LCD_GetYSize() / 2));
	//	GUI_AA_FillPolygon(pParam.aPoint2, GUI_COUNTOF(_aNeedle[1]), MAG * LCD_GetXSize() / 2, MAG * (LCD_GetYSize() / 2));
		//GUI_AA_FillPolygon(pParam.aPoint3, GUI_COUNTOF(_aNeedle[2]), MAG * LCD_GetXSize() / 2, MAG * (LCD_GetYSize() / 2));

		GUI_FillCircle(160, 120, 3);
	
		break;
	case WM_NOTIFY_PARENT:
		Id = WM_GetId(pMsg->hWinSrc);    /* Id of widget */
		NCode = pMsg->Data.v;            /* Notification code */
		switch (NCode)
		{
		case WM_NOTIFICATION_CLICKED:
			switch (Id)
			{
			case BUTTON_ID_EXIT:
				GUI_SetAppIndex(APP_MainMenu);
				GUI_SetAppDirection(MEMDEV_ANIMATION_LEFT);
				_MoveShiftWindow(&pMsg->hWin, MEMDEV_ANIMATION_RIGHT, 1, 1);
				GUI_SetCancel(APP_Clock);
				GUI_ClearHalt();
				break;
			default:
				break;
			}
		}
		break;
	default:
		WM_DefaultProc(pMsg);
	}
}
开发者ID:fzzjoy，项目名称:SimulationTrial，代码行数:44，代码来源:AppClock.c


示例20: GUIDEMO_HardwareInfo

void GUIDEMO_HardwareInfo(void) {
  #if (LCD_CONTROLLER == 1375) | (LCD_CONTROLLER == 13705) | (LCD_CONTROLLER == 1386) | (LCD_CONTROLLER == 13806) | (LCD_CONTROLLER == -1)
    GUIDEMO_ShowIntro("Hardware info",   "" );
    GUI_Clear();
    #if GUIDEMO_LARGE
      GUI_SetFont(&GUI_FontComic24B_ASCII);
    #else
      GUI_SetFont(&GUI_FontComic18B_ASCII);
    #endif
    GUIDEMO_SetColor(GUI_WHITE);
    #if (LCD_CONTROLLER == 1375) | (LCD_CONTROLLER == 13705)
      #if GUIDEMO_LARGE
        GUI_DispStringAt("EPSON 13705\n", 10, 65 );
      #else
        GUI_DispStringHCenterAt("EPSON 13705\n", LCD_XSIZE >> 1, LCD_YSIZE / 14);
      #endif
      _Show("On chip VRAM",  "80 kb");
      _Show("Max. colors",   "4096 (4 bit per color)");
      _Show("Display types", "Mono / color / TFT");
      _Show("LUT",           "256 index colors");
    #elif (LCD_CONTROLLER == 1386) | (LCD_CONTROLLER == 13806)
      #if GUIDEMO_LARGE
        GUI_DispStringAt("EPSON 13806\n", 10, 65 );
      #else
        GUI_DispStringHCenterAt("EPSON 13806\n", LCD_XSIZE >> 1, LCD_YSIZE / 14);
      #endif
      _Show("On chip VRAM",  "1200 kb");
      _Show("Max. colors",   "65536 (up to 16 bpp)");
      _Show("Display types", "Mono / color / TFT (analog / digital)");
      _Show("LUT",           "256 index colors");
	#elif (LCD_CONTROLLER == -1)
	  #if GUIDEMO_LARGE
        GUI_DispStringAt("Himax 8346\n", 10, 65 );
      #else
        GUI_DispStringHCenterAt("Himax 8346\n", LCD_XSIZE >> 1, LCD_YSIZE / 14);
      #endif
      _Show("On chip GRAM",  "1380 kb");
      _Show("Max. colors",   "262144 (up to 18 bpp)");
      _Show("Display types", "Mono / color / TFT");
      _Show("LUT",           "256 index colors");
    #endif
    GUIDEMO_Delay(2500);
  #endif
}
开发者ID:a-c-t-i-n-i-u-m，项目名称:HY-STM32F103，代码行数:44，代码来源:GUIDEMO_HardwareInfo.c



注：本文中的GUI_Clear函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ GUI_ClearRect函数代码示例发布时间：2022-05-30
下一篇：
C++ GUI_COUNTOF函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap