• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ GTK_FILE_CHOOSER函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GTK_FILE_CHOOSER函数的典型用法代码示例。如果您正苦于以下问题:C++ GTK_FILE_CHOOSER函数的具体用法?C++ GTK_FILE_CHOOSER怎么用?C++ GTK_FILE_CHOOSER使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GTK_FILE_CHOOSER函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: choose_picture

static void
choose_picture(AvatarManipulation *self)
{
    AvatarManipulationPrivate *priv = AVATAR_MANIPULATION_GET_PRIVATE(self);
    GtkFileChooserAction action = GTK_FILE_CHOOSER_ACTION_OPEN;
    GtkFileFilter *filter = gtk_file_filter_new ();
    gint res;

    auto preview = gtk_image_new();

    GtkWidget *ring_main_window = gtk_widget_get_toplevel(GTK_WIDGET(self));

    auto dialog = gtk_file_chooser_dialog_new (_("Open Avatar Image"),
                                          GTK_WINDOW(ring_main_window),
                                          action,
                                          _("_Cancel"),
                                          GTK_RESPONSE_CANCEL,
                                          _("_Open"),
                                          GTK_RESPONSE_ACCEPT,
                                          NULL);

    /* add filters */
    gtk_file_filter_add_pattern (filter,"*.png");
    gtk_file_filter_add_pattern (filter,"*.jpg");
    gtk_file_chooser_set_filter (GTK_FILE_CHOOSER(dialog),filter);

    /* add an image preview inside the file choose */
    gtk_file_chooser_set_preview_widget (GTK_FILE_CHOOSER(dialog), preview);
    g_signal_connect (GTK_FILE_CHOOSER(dialog), "update-preview", G_CALLBACK (update_preview_cb), preview);

    /* start the file chooser */
    res = gtk_dialog_run (GTK_DIALOG(dialog)); /* blocks until the dialog is closed */

    if (res == GTK_RESPONSE_ACCEPT) {
        if(auto filename = gtk_file_chooser_get_filename(GTK_FILE_CHOOSER (dialog))) {
            GError* error =  nullptr; /* initialising to null avoid trouble... */

            auto picture = gdk_pixbuf_new_from_file_at_size (filename, VIDEO_WIDTH, VIDEO_HEIGHT, &error);

            if (!error) {
                /* reset crop area */
                if (priv->crop_area)
                    gtk_container_remove(GTK_CONTAINER(priv->vbox_crop_area), priv->crop_area);
                priv->crop_area = cc_crop_area_new();
                gtk_widget_show(priv->crop_area);
                gtk_box_pack_start(GTK_BOX(priv->vbox_crop_area), priv->crop_area, TRUE, TRUE, 0);
                cc_crop_area_set_picture(CC_CROP_AREA(priv->crop_area), picture);
                g_object_unref(picture);

                set_state(self, AVATAR_MANIPULATION_STATE_EDIT);
            } else {
                g_warning("(choose_picture) failed to load pixbuf from file: %s", error->message);
                g_error_free(error);
            }

            g_free(filename);
        } else {
            g_warning("(choose_picture) filename empty");
        }
    }

    gtk_widget_destroy(dialog);
}
开发者ID:savoirfairelinux,项目名称:ring-client-gnome,代码行数:63,代码来源:avatarmanipulation.cpp


示例2: file_export_response_callback

/**
 * A button hit in the Export Dialog
 */
static void
file_export_response_callback(GtkWidget *fs, 
                              gint       response, 
                              gpointer   user_data)
{
  char *filename;
  Diagram *dia;
  DiaExportFilter *ef;
  struct stat statbuf;

  dia = g_object_get_data (G_OBJECT (fs), "user_data");
  g_assert (dia);

  if (response == GTK_RESPONSE_ACCEPT) {
    gint index;

    diagram_update_extents(dia);

    filename = gtk_file_chooser_get_filename(GTK_FILE_CHOOSER(fs));

    if (g_stat(filename, &statbuf) == 0) {
      GtkWidget *dialog = NULL;

      dialog = gtk_message_dialog_new (GTK_WINDOW(fs),
				       GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT, 
				       GTK_MESSAGE_QUESTION,
				       GTK_BUTTONS_YES_NO,
				       _("File already exists"));
      gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(dialog),
        _("The file '%s' already exists.\n"
        "Do you want to overwrite it?"), dia_message_filename(filename));
      gtk_dialog_set_default_response (GTK_DIALOG (dialog), GTK_RESPONSE_YES);

      if (gtk_dialog_run (GTK_DIALOG (dialog)) != GTK_RESPONSE_YES) {
	/* if not overwrite allow to select another filename */
	gtk_widget_destroy(dialog);
	g_free (filename);
	return;
      }
      gtk_widget_destroy(dialog);
    }

    index = gtk_combo_box_get_active (GTK_COMBO_BOX(user_data));
    if (index >= 0)
      persistence_set_integer ("export-filter", index);
    ef = efilter_by_index (index - 1, NULL);
    if (!ef)
      ef = filter_guess_export_filter(filename);
    if (ef) {
      DiaContext *ctx = dia_context_new (_("Export"));

      g_object_ref(dia->data);
      dia_context_set_filename (ctx, filename);
      ef->export_func(dia->data, ctx,
		      filename, dia->filename, ef->user_data);
      g_object_unref(dia->data);
      dia_context_release (ctx);
    } else
      message_error(_("Could not determine which export filter\n"
		      "to use to save '%s'"), dia_message_filename(filename));
    g_free (filename);
  }
  g_object_unref (dia); /* drop our diagram reference */
  gtk_widget_destroy(exportdlg);
}
开发者ID:AmiGanguli,项目名称:dia,代码行数:68,代码来源:filedlg.c


示例3: RunLinuxDialog


//.........这里部分代码省略.........

	// Create the threading spin box and label, and stash them in a box. (Yes, we do a lot of that.)
	threads_label = gtk_label_new("Extra rendering threads:");
	threads_spin = gtk_spin_button_new_with_range(0,100,1);
	gtk_spin_button_set_value(GTK_SPIN_BUTTON(threads_spin), theApp.GetConfig("extrathreads", 0));
	threads_box = gtk_hbox_new(false, 0);
	gtk_box_pack_start(GTK_BOX(threads_box), threads_label, false, false, 5);
	gtk_box_pack_start(GTK_BOX(threads_box), threads_spin, false, false, 5);

	// A bit of funkiness for the resolution box.
	native_label = gtk_label_new("Original PS2 Resolution: ");
	native_res_check = gtk_check_button_new_with_label("Native");
	native_box = gtk_hbox_new(false, 5);
	gtk_box_pack_start(GTK_BOX(native_box), native_label, false, false, 5);
	gtk_box_pack_start(GTK_BOX(native_box), native_res_check, false, false, 5);

	fsaa_label = gtk_label_new("Or Use Scaling:");
	fsaa_combo_box = CreateMsaaComboBox();
	fsaa_box = gtk_hbox_new(false, 5);
	gtk_box_pack_start(GTK_BOX(fsaa_box), fsaa_label, false, false, 5);
	gtk_box_pack_start(GTK_BOX(fsaa_box), fsaa_combo_box, false, false, 5);

	rexy_label = gtk_label_new("Custom Resolution:");
	resx_spin = gtk_spin_button_new_with_range(256,8192,1);
	gtk_spin_button_set_value(GTK_SPIN_BUTTON(resx_spin), theApp.GetConfig("resx", 1024));
	resy_spin = gtk_spin_button_new_with_range(256,8192,1);
	gtk_spin_button_set_value(GTK_SPIN_BUTTON(resy_spin), theApp.GetConfig("resy", 1024));
	resxy_box = gtk_hbox_new(false, 5);
	gtk_box_pack_start(GTK_BOX(resxy_box), rexy_label, false, false, 5);
	gtk_box_pack_start(GTK_BOX(resxy_box), resx_spin, false, false, 5);
	gtk_box_pack_start(GTK_BOX(resxy_box), resy_spin, false, false, 5);

	// shader fx entry
	shader            = gtk_file_chooser_button_new("Select an external shader", GTK_FILE_CHOOSER_ACTION_OPEN);
	shader_conf       = gtk_file_chooser_button_new("Then select a config", GTK_FILE_CHOOSER_ACTION_OPEN);
	shader_label      = gtk_label_new("External shader glsl");
	shader_conf_label = gtk_label_new("External shader conf");

	// Create our hack settings.
	hack_alpha_check    = gtk_check_button_new_with_label("Alpha Hack");
	hack_date_check     = gtk_check_button_new_with_label("Date Hack");
	hack_offset_check   = gtk_check_button_new_with_label("Offset Hack");
	hack_skipdraw_label = gtk_label_new("Skipdraw:");
	hack_skipdraw_spin  = gtk_spin_button_new_with_range(0,1000,1);
	hack_enble_check    = gtk_check_button_new_with_label("Enable User Hacks");
	hack_wild_check     = gtk_check_button_new_with_label("Wild arm Hack");
	hack_sprite_check   = gtk_check_button_new_with_label("Sprite Hack");
	hack_msaa_check     = gtk_check_button_new_with_label("Msaa Hack");
	hack_tco_label      = gtk_label_new("Texture Offset: 0x");
	hack_tco_entry      = gtk_entry_new();
	hack_logz_check     = gtk_check_button_new_with_label("Log Depth Hack");

	gtk_spin_button_set_value(GTK_SPIN_BUTTON(hack_skipdraw_spin), theApp.GetConfig("UserHacks_SkipDraw", 0));
	set_hex_entry(hack_tco_entry, theApp.GetConfig("UserHacks_TCOffset", 0));

	// Tables are strange. The numbers are for their position: left, right, top, bottom.
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_alpha_check, 0, 1, 0, 1);
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_offset_check, 1, 2, 0, 1);
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_sprite_check, 0, 1, 1, 2);
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_wild_check, 1, 2, 1, 2);
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_logz_check, 0, 1, 2, 3);
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_date_check, 1, 2, 2, 3);
	// Note: MSAA is not implemented yet. I disable it to make the table square
	//gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_msaa_check, 2, 3, 1, 2);
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_skipdraw_label, 0, 1, 3, 4);
	gtk_table_attach_defaults(GTK_TABLE(hack_table), hack_skipdraw_spin, 1, 2, 3, 4);
开发者ID:Anoth3rone,项目名称:pcsx2,代码行数:67,代码来源:GSLinuxDialog.cpp


示例4: gtk_widget_show

void GtkToolkitFileChooser::OpenDialog(X11Types::Window parent, ToolkitFileChooserListener* result_listener)
{
	gtk_widget_show(m_dialog);

	XSetTransientForHint(GDK_WINDOW_XDISPLAY(gtk_widget_get_window(m_dialog)),
						 GDK_WINDOW_XID(gtk_widget_get_window(m_dialog)), parent);

	if (m_action == GTK_FILE_CHOOSER_ACTION_SELECT_FOLDER)
		GtkUtils::SetResourceName(m_dialog, "directorychooserdialog");
	else
		GtkUtils::SetResourceName(m_dialog, "filechooserdialog");

	int response_id;
	while(1)
	{
		m_open_dialog = true;
		response_id = gtk_dialog_run(GTK_DIALOG(m_dialog));
		m_open_dialog = false;

		if (response_id == GTK_RESPONSE_ACCEPT)
		{
			m_selected_filenames = gtk_file_chooser_get_filenames(GTK_FILE_CHOOSER(m_dialog));
			m_active_directory = gtk_file_chooser_get_current_folder(GTK_FILE_CHOOSER(m_dialog));

			if (m_action == GTK_FILE_CHOOSER_ACTION_SAVE)
			{
				// BIG FAT TEST for saving. The file selector (or at least some versions of it)
				// allows users entering an existing directory and accepts this as a valid filename
				// Do not allow that as we have code that can call OpFile::Delete(TRUE) before saving
				// the file. See DSK-318398
				if (!VerifySaveFiles())
				{
					GtkWidget* dialog = m_dialog;
					m_dialog = 0;
					ResetData();
					m_dialog = dialog;
					continue;
				}
			}
		}
		break;
	}

	/* Note that gtk sends GTK_RESPONSE_DELETE_EVENT if the dialog is
	 * closed, including if the user presses the Escape button.
	 */
	if (response_id == GTK_RESPONSE_ACCEPT || response_id == GTK_RESPONSE_CANCEL || response_id == GTK_RESPONSE_DELETE_EVENT)
	{
		m_can_destroy = false;
		result_listener->OnChoosingDone(this);
		m_can_destroy = true;
		if (m_request_destroy)
		{
			delete this; // Calls ResetData() in destructor
			return;
		}
	}

	ResetData();
	GtkUtils::ProcessEvents();

	if (response_id == RESPONSE_KILL_DIALOG)
		delete this;
}
开发者ID:prestocore,项目名称:browser,代码行数:64,代码来源:GtkFileChooser.cpp


示例5: file_save_as_response_callback

/**
 * Respond to a button press (also destroy) in the save as dialog.
 */
static void
file_save_as_response_callback(GtkWidget *fs, 
                               gint       response, 
                               gpointer   user_data)
{
  char *filename;
  Diagram *dia;
  struct stat stat_struct;

  if (response == GTK_RESPONSE_ACCEPT) {
    dia = g_object_get_data (G_OBJECT(fs), "user_data");

    filename = gtk_file_chooser_get_filename(GTK_FILE_CHOOSER(fs));
    if (!filename) {
      /* Not getting a filename looks like a contract violation in Gtk+ to me.
       * Still Dia would be crashing (bug #651949) - instead simply go back to the dialog. */
      gtk_window_present (GTK_WINDOW (fs));
      return;
    }

    if (g_stat(filename, &stat_struct) == 0) {
      GtkWidget *dialog = NULL;
      char *utf8filename = NULL;
      if (!g_utf8_validate(filename, -1, NULL)) {
	utf8filename = g_filename_to_utf8(filename, -1, NULL, NULL, NULL);
	if (utf8filename == NULL) {
	  message_warning(_("Some characters in the filename are neither UTF-8\n" 
			    "nor your local encoding.\nSome things will break."));
	}
      }
      if (utf8filename == NULL) utf8filename = g_strdup(filename);


      dialog = gtk_message_dialog_new (GTK_WINDOW(fs),
				       GTK_DIALOG_MODAL, GTK_MESSAGE_QUESTION,
				       GTK_BUTTONS_YES_NO,
				       _("File already exists"));
      gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(dialog),
        _("The file '%s' already exists.\n"
          "Do you want to overwrite it?"), utf8filename);
      g_free(utf8filename);
      gtk_dialog_set_default_response (GTK_DIALOG (dialog), GTK_RESPONSE_YES);

      if (gtk_dialog_run (GTK_DIALOG (dialog)) != GTK_RESPONSE_YES) {
	/* don't hide/destroy the dialog, but simply go back to it */
	gtk_window_present (GTK_WINDOW (fs));
	gtk_widget_destroy(dialog);
        g_free (filename);
	return;
      }
      gtk_widget_destroy(dialog);
    }

    dia->data->is_compressed = gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(user_data));

    diagram_update_extents(dia);

    {
      DiaContext *ctx = dia_context_new (_("Save as"));
      diagram_set_filename(dia, filename);
      dia_context_set_filename (ctx, filename);
      if (diagram_save(dia, filename, ctx))
	recent_file_history_add(filename);
      dia_context_release (ctx);
    }
    g_free (filename);
  }
  /* if we have our own reference, drop it before destroy */
  if ((dia = g_object_get_data (G_OBJECT(fs), "user_data")) != NULL) {
    g_object_set_data (G_OBJECT(fs), "user_data", NULL);
    g_object_unref (dia);
  }
  /* if we destroy it gtk_dialog_run wont give the response */
  if (!g_object_get_data (G_OBJECT(fs), "dont-destroy"))
    gtk_widget_destroy(GTK_WIDGET(fs));
}
开发者ID:AmiGanguli,项目名称:dia,代码行数:79,代码来源:filedlg.c


示例6: main


//.........这里部分代码省略.........

	GdkGeometry geo = { 
		-1, -1, 1024, 768, -1, -1, 10, 10, 0, 0, GDK_GRAVITY_NORTH_WEST
	};
	GdkWindowHints geo_mask;
	geo_mask = GDK_HINT_MIN_SIZE | GDK_HINT_MAX_SIZE | GDK_HINT_BASE_SIZE;
	gtk_window_set_geometry_hints( GTK_WINDOW(widget), widget, &geo, geo_mask);
	width = ghb_settings_get_int(ud->settings, "window_width");
	height = ghb_settings_get_int(ud->settings, "window_height");
	gtk_window_resize(GTK_WINDOW(widget), width, height);
	gtk_widget_show(widget);

	/*
 	 * Filter objects in GtkBuilder xml
 	 * Unfortunately, GtkFilter is poorly supported by GtkBuilder,
 	 * so a lot of the setup must happen in code.
		SourceFilterAll
		SourceFilterVideo
		SourceFilterTS
		SourceFilterMPG
		SourceFilterEVO
		SourceFilterVOB
		SourceFilterMKV
		SourceFilterMP4
		SourceFilterAVI
		SourceFilterMOV
		SourceFilterOGG
		SourceFilterFLV
		SourceFilterWMV
	*/
	// Add filters to source chooser
	GtkFileFilter *filter;
	GtkFileChooser *chooser;
	chooser = GTK_FILE_CHOOSER(GHB_WIDGET(ud->builder, "source_dialog"));
	filter = GTK_FILE_FILTER(GHB_OBJECT(ud->builder, "SourceFilterAll"));
	gtk_file_filter_set_name(filter, "All");
	gtk_file_filter_add_pattern(filter, "*");
	gtk_file_chooser_add_filter(chooser, filter);
	filter = GTK_FILE_FILTER(GHB_OBJECT(ud->builder, "SourceFilterVideo"));
	gtk_file_filter_set_name(filter, "Video");
	gtk_file_filter_add_mime_type(filter, "video/*");
	gtk_file_chooser_add_filter(chooser, filter);
	filter = GTK_FILE_FILTER(GHB_OBJECT(ud->builder, "SourceFilterTS"));
	gtk_file_filter_set_name(filter, "TS");
	gtk_file_filter_add_pattern(filter, "*.ts");
	gtk_file_filter_add_pattern(filter, "*.TS");
	gtk_file_filter_add_pattern(filter, "*.m2ts");
	gtk_file_filter_add_pattern(filter, "*.M2TS");
	gtk_file_chooser_add_filter(chooser, filter);
	filter = GTK_FILE_FILTER(GHB_OBJECT(ud->builder, "SourceFilterMPG"));
	gtk_file_filter_set_name(filter, "MPG");
	gtk_file_filter_add_pattern(filter, "*.mpg");
	gtk_file_filter_add_pattern(filter, "*.MPG");
	gtk_file_filter_add_pattern(filter, "*.mepg");
	gtk_file_filter_add_pattern(filter, "*.MEPG");
	gtk_file_chooser_add_filter(chooser, filter);
	filter = GTK_FILE_FILTER(GHB_OBJECT(ud->builder, "SourceFilterEVO"));
	gtk_file_filter_set_name(filter, "EVO");
	gtk_file_filter_add_pattern(filter, "*.evo");
	gtk_file_filter_add_pattern(filter, "*.EVO");
	gtk_file_chooser_add_filter(chooser, filter);
	filter = GTK_FILE_FILTER(GHB_OBJECT(ud->builder, "SourceFilterVOB"));
	gtk_file_filter_set_name(filter, "VOB");
	gtk_file_filter_add_pattern(filter, "*.vob");
	gtk_file_filter_add_pattern(filter, "*.VOB");
	gtk_file_chooser_add_filter(chooser, filter);
开发者ID:E32vb051LS4f9,项目名称:HandBrake,代码行数:67,代码来源:main.c


示例7: sendMail

void sendMail(GtkWidget* widget,struct GUI *gui){
	
	char addr[16];
	int sockfd;
	int n,i;
	
	/* Reset Statu Label */
	for(i=0;i<8;i++){
		gtk_label_set_text(GTK_LABEL(gui->statu[i]),"-");
	}
	
	/* Get host and port */
	gui->host = (char *)gtk_entry_get_text(GTK_ENTRY(gui->iptHost));
	gui->port = (char *)gtk_entry_get_text(GTK_ENTRY(gui->iptPort));
	
	/* Get From */
	gui->from = (char *)gtk_entry_get_text(GTK_ENTRY(gui->iptFrom));
	
	/* Get To */
	for(i=0;i<gui->c_to;i++){
		gui->to[i] = (char *)gtk_entry_get_text(GTK_ENTRY(gui->iptTo[i]));
	}
	
	/* Get Cc */
	for(i=0;i<gui->c_cc;i++){
		gui->cc[i] = (char *)gtk_entry_get_text(GTK_ENTRY(gui->iptCc[i]));
	}
	
	/* Get Bcc */
	for(i=0;i<gui->c_bcc;i++){
		gui->bcc[i] = (char *)gtk_entry_get_text(GTK_ENTRY(gui->iptBcc[i]));
	}
	
	/* Get Subject */
	gui->subject = (char *)gtk_entry_get_text(GTK_ENTRY(gui->iptSubject));
	
	/* Get Mailbody file */
	gui->mailbody = (char *)gtk_file_chooser_get_filename(GTK_FILE_CHOOSER(gui->btnOpenmail));
	
	/* Get Attachment files */
	for(i=0;i<gui->c_file;i++){
		gui->file[i] = (char *)gtk_file_chooser_get_filename(GTK_FILE_CHOOSER(gui->btnOpenfile[i]));
	}
	
	if(strcmp(gui->host,"")==0||strcmp(gui->port,"")==0){
		gtk_label_set_text(GTK_LABEL(gui->statu[0]),"X");
		gtk_widget_show_all(gui->window);
		printf("host or port is (are) null string\n");
		return;
	}
	
	/* Connect to mail server */
	sockfd = connectToHost(gui->host,gui->port,addr);
	if(sockfd==-1){
		/* Connect Fail */
		printf("Connect to host %s:%s fail\n",gui->host,gui->port);
		gtk_label_set_text(GTK_LABEL(gui->statu[0]),"X");
		gtk_widget_show_all(gui->window);
		return;
	}else{
		printf("Connect to host %s(%s):%s\n",gui->host,addr,gui->port);
		
		n = HELO(sockfd);
		if(n==-1){
			close(sockfd);
			printf("Close SimpleMail.\n");
			gtk_label_set_text(GTK_LABEL(gui->statu[0]),"X");
			gtk_widget_show_all(gui->window);
			return;
		}
		gtk_label_set_text(GTK_LABEL(gui->statu[0]),"O");
		gtk_widget_show_all(gui->window);
		
		
		n = MAIL(sockfd,gui->from);
		if(n==-1){
			close(sockfd);
			printf("Close SimpleMail.\n");
			gtk_label_set_text(GTK_LABEL(gui->statu[1]),"X");
			gtk_widget_show_all(gui->window);
			return;
		}
		gtk_label_set_text(GTK_LABEL(gui->statu[1]),"O");
		gtk_widget_show_all(gui->window);
		
		
		n = RCPT(sockfd,gui->to,gui->c_to,gui->cc,gui->c_cc,gui->bcc,gui->c_bcc);
		switch(n){
			case -1:
				close(sockfd);
				printf("Close SimpleMail.\n");
				gtk_label_set_text(GTK_LABEL(gui->statu[2]),"X");
				gtk_widget_show_all(gui->window);
				return;
			case -2:
				close(sockfd);
				printf("Close SimpleMail.\n");
				gtk_label_set_text(GTK_LABEL(gui->statu[2]),"O");
				gtk_label_set_text(GTK_LABEL(gui->statu[3]),"X");
				gtk_widget_show_all(gui->window);
//.........这里部分代码省略.........
开发者ID:ChunHungLiu,项目名称:ntu-homeworks,代码行数:101,代码来源:SMCF_GUI.c


示例8: write_fru

static size_t write_fru(char *eeprom)
{
	gint result;
	const char *serial, *file;
	char *ser_num, *filename;
	time_t frutime;
	FILE *fp = NULL;
	size_t i;
	time_t tmp;
	struct tm *tmp2;
	char buf[256];
	int j, n;
	struct dirent **namelist;
	GtkListStore *store;

	n = scandir(FRU_FILES, &namelist, 0, alphasort);
	/* No fru files, don't bother */
	if (n < 0) {
		printf("didn't find FRU_Files in %s at %s(%s)\n", FRU_FILES, __FILE__, __func__);
		return 0;
	}

	g_object_set(dialogs.serial_num, "secondary_text", eeprom, NULL);

	filename = g_malloc(PATH_MAX);
	ser_num = malloc(128);
	memset(ser_num, 0, 128);

	fp = fopen(".serialnum", "r");
	if (fp) {
		i = fread(ser_num, 1, 128, fp);
		if (!ferror(fp) && (i == 128 || feof(fp)))
			gtk_entry_set_text(GTK_ENTRY(serial_num), (const gchar*)&ser_num[1]);
		fclose(fp);
	}

	store = GTK_LIST_STORE(gtk_combo_box_get_model(GTK_COMBO_BOX(fru_file_list)));
	gtk_list_store_clear(store);

	for (j = 0; j < n; j++) {
		if (namelist[j]->d_type == DT_REG && str_endswith(namelist[j]->d_name, ".bin"))
			gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(fru_file_list), namelist[j]->d_name);
		free(namelist[j]);
	}
	free(namelist);

	gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(fru_file_list), "Other...");

	gtk_combo_box_set_active(GTK_COMBO_BOX(fru_file_list), ser_num[0]);
	free(ser_num);

	frutime = mins_since_jan_1_1996();
	tmp = min2date(frutime);
	tmp2 = gmtime(&tmp);

	strftime(buf, sizeof(buf), "%a %b %d %H:%M %Y", tmp2);

	gtk_entry_set_text(GTK_ENTRY(fru_date), buf);

get_serial_and_file:
	result = gtk_dialog_run(GTK_DIALOG(dialogs.serial_num));

	i = 0;
	switch (result) {
		case GTK_RESPONSE_OK:
			serial = gtk_entry_get_text(GTK_ENTRY(serial_num));
			if (strlen(serial) == 0) {
				create_blocking_popup(GTK_MESSAGE_INFO, GTK_BUTTONS_OK,
					"", "Serial number required");
				goto get_serial_and_file;
			}

			file = gtk_combo_box_get_active_text(GTK_COMBO_BOX(fru_file_list));

			if (strncmp(file, "Other...", 8) != 0) {
				snprintf(filename, PATH_MAX, FRU_FILES "%s", file);
			} else {
				/* manually choose fru file */
				GtkWidget *dialog;

				dialog = gtk_file_chooser_dialog_new("Select FRU file",
							GTK_WINDOW(dialogs.serial_num),
							GTK_FILE_CHOOSER_ACTION_OPEN,
							GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL,
							GTK_STOCK_OPEN, GTK_RESPONSE_ACCEPT,
							NULL);

				if (gtk_dialog_run(GTK_DIALOG(dialog)) == GTK_RESPONSE_ACCEPT) {
					filename = gtk_file_chooser_get_filename(GTK_FILE_CHOOSER(dialog));
				}
				gtk_widget_destroy(dialog);
			}

			if (filename) {
				fflush(NULL);
				sprintf(buf, "fru-dump -i %s -o %s -s %s -d %d 2>&1",
						filename, eeprom, serial, (unsigned int)frutime);
#if DEBUG
				printf("%s\n", buf);
#else
//.........这里部分代码省略.........
开发者ID:tinglic,项目名称:iio-oscilloscope,代码行数:101,代码来源:dialogs.c


示例9: picture_selection_dialog

/*! \brief Creates the add image dialog
 *  \par Function Description
 *  This function creates the add image dialog and loads the selected picture.
 */
void picture_selection_dialog (GschemToplevel *w_current)
{
  TOPLEVEL *toplevel = gschem_toplevel_get_toplevel (w_current);
  gchar *filename;
  GdkPixbuf *pixbuf;
  GError *error = NULL;
  
  w_current->pfswindow = gtk_file_chooser_dialog_new (_("Select a picture file..."),
						      GTK_WINDOW(w_current->main_window),
						      GTK_FILE_CHOOSER_ACTION_OPEN,
						      GTK_STOCK_CANCEL, 
						      GTK_RESPONSE_CANCEL,
						      GTK_STOCK_OPEN, 
						      GTK_RESPONSE_ACCEPT,
						      NULL);
  /* Set the alternative button order (ok, cancel, help) for other systems */
  gtk_dialog_set_alternative_button_order(GTK_DIALOG(w_current->pfswindow),
					  GTK_RESPONSE_ACCEPT,
					  GTK_RESPONSE_CANCEL,
					  -1);

  if (w_current->pixbuf_filename)
    gtk_file_chooser_set_filename(GTK_FILE_CHOOSER(w_current->pfswindow), 
				  w_current->pixbuf_filename);
    
  if (gtk_dialog_run (GTK_DIALOG (w_current->pfswindow)) == GTK_RESPONSE_ACCEPT) {

    filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER (w_current->pfswindow));
    gtk_widget_destroy(w_current->pfswindow);
    w_current->pfswindow=NULL;

    pixbuf = gdk_pixbuf_new_from_file (filename, &error);
    
    if (!pixbuf) {
      GtkWidget *dialog;
      
      dialog = gtk_message_dialog_new (GTK_WINDOW (w_current->main_window),
				       GTK_DIALOG_DESTROY_WITH_PARENT,
				       GTK_MESSAGE_ERROR,
				       GTK_BUTTONS_CLOSE,
				       _("Failed to load picture: %s"),
				       error->message);
      /* Wait for any user response */
      gtk_dialog_run (GTK_DIALOG (dialog));
      
      g_error_free (error);
      gtk_widget_destroy(dialog);
    }
    else {
#if DEBUG
      printf("Picture loaded succesfully.\n");
#endif
      
      o_invalidate_rubber(w_current);
      i_update_middle_button(w_current, i_callback_add_picture, _("Picture"));
      w_current->inside_action = 0;
      
      o_picture_set_pixbuf(w_current, pixbuf, filename);
    
      gschem_toplevel_page_content_changed (w_current, toplevel->page_current);
      i_set_state(w_current, DRAWPICTURE);
    }
    g_free (filename);
  }

  i_update_toolbar(w_current);
  if (w_current->pfswindow) {
    gtk_widget_destroy(w_current->pfswindow);
    w_current->pfswindow=NULL;
  }
}
开发者ID:blueantst,项目名称:geda-gaf,代码行数:75,代码来源:o_picture.c


示例10: _lib_import_single_image_callback

static void _lib_import_single_image_callback(GtkWidget *widget,gpointer user_data)
{
  GtkWidget *win = dt_ui_main_window(darktable.gui->ui);
  GtkWidget *filechooser = gtk_file_chooser_dialog_new (_("import image"),
                           GTK_WINDOW (win),
                           GTK_FILE_CHOOSER_ACTION_OPEN,
                           GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL,
                           GTK_STOCK_OPEN, GTK_RESPONSE_ACCEPT,
                           (char *)NULL);

  gtk_file_chooser_set_select_multiple(GTK_FILE_CHOOSER(filechooser), TRUE);

  char *last_directory = dt_conf_get_string("ui_last/import_last_directory");
  if(last_directory != NULL)
    gtk_file_chooser_set_current_folder(GTK_FILE_CHOOSER (filechooser), last_directory);

  char *cp, **extensions, ext[1024];
  GtkFileFilter *filter;
  filter = GTK_FILE_FILTER(gtk_file_filter_new());
  extensions = g_strsplit(dt_supported_extensions, ",", 100);
  for(char **i=extensions; *i!=NULL; i++)
  {
    snprintf(ext, 1024, "*.%s", *i);
    gtk_file_filter_add_pattern(filter, ext);
    gtk_file_filter_add_pattern(filter, cp=g_ascii_strup(ext, -1));
    g_free(cp);
  }
  g_strfreev(extensions);
  gtk_file_filter_set_name(filter, _("supported images"));
  gtk_file_chooser_add_filter(GTK_FILE_CHOOSER(filechooser), filter);

  filter = GTK_FILE_FILTER(gtk_file_filter_new());
  gtk_file_filter_add_pattern(filter, "*");
  gtk_file_filter_set_name(filter, _("all files"));
  gtk_file_chooser_add_filter(GTK_FILE_CHOOSER(filechooser), filter);

  GtkWidget *preview = gtk_image_new();
  gtk_file_chooser_set_preview_widget(GTK_FILE_CHOOSER(filechooser), preview);
  g_signal_connect(filechooser, "update-preview", G_CALLBACK (_lib_import_update_preview), preview);

  dt_lib_import_metadata_t metadata;
  gtk_file_chooser_set_extra_widget (GTK_FILE_CHOOSER (filechooser), _lib_import_get_extra_widget(&metadata, FALSE));

  if (gtk_dialog_run (GTK_DIALOG (filechooser)) == GTK_RESPONSE_ACCEPT)
  {
    dt_conf_set_string("ui_last/import_last_directory", gtk_file_chooser_get_current_folder(GTK_FILE_CHOOSER (filechooser)));
    _lib_import_evaluate_extra_widget(&metadata, FALSE);

    char *filename = NULL;
    dt_film_t film;
    GSList *list = gtk_file_chooser_get_filenames (GTK_FILE_CHOOSER (filechooser));
    GSList *it = list;
    int id = 0;
    int filmid = 0;

    /* reset filter to display all images, otherwise view may remain empty */
    dt_view_filter_reset_to_show_all(darktable.view_manager);

    while(it)
    {
      filename = (char *)it->data;
      gchar *directory = g_path_get_dirname((const gchar *)filename);
      filmid = dt_film_new(&film, directory);
      id = dt_image_import(filmid, filename, TRUE);
      if(!id) dt_control_log(_("error loading file `%s'"), filename);
      g_free (filename);
      g_free (directory);
      it = g_slist_next(it);
    }

    if(id)
    {
      dt_film_open(filmid);
      // make sure buffers are loaded (load full for testing)
      dt_mipmap_buffer_t buf;
      dt_mipmap_cache_read_get(darktable.mipmap_cache, &buf, id, DT_MIPMAP_FULL, DT_MIPMAP_BLOCKING);
      if(!buf.buf)
      {
        dt_control_log(_("file has unknown format!"));
      }
      else
      {
        dt_mipmap_cache_read_release(darktable.mipmap_cache, &buf);
        DT_CTL_SET_GLOBAL(lib_image_mouse_over_id, id);
        dt_ctl_switch_mode_to(DT_DEVELOP);
      }
    }
  }
  gtk_widget_destroy(metadata.frame);
  gtk_widget_destroy (filechooser);
  gtk_widget_queue_draw(dt_ui_center(darktable.gui->ui));
}
开发者ID:ealasu,项目名称:darktable,代码行数:92,代码来源:import.c


示例11: _lib_import_folder_callback

static void _lib_import_folder_callback(GtkWidget *widget,gpointer user_data)
{
  GtkWidget *win = dt_ui_main_window(darktable.gui->ui);
  GtkWidget *filechooser = gtk_file_chooser_dialog_new (_("import film"),
                           GTK_WINDOW (win),
                           GTK_FILE_CHOOSER_ACTION_SELECT_FOLDER,
                           GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL,
                           GTK_STOCK_OPEN, GTK_RESPONSE_ACCEPT,
                           (char *)NULL);

  gtk_file_chooser_set_select_multiple(GTK_FILE_CHOOSER(filechooser), TRUE);

  char *last_directory = dt_conf_get_string("ui_last/import_last_directory");
  if(last_directory != NULL)
    gtk_file_chooser_set_current_folder(GTK_FILE_CHOOSER (filechooser), last_directory);

  dt_lib_import_metadata_t metadata;
  gtk_file_chooser_set_extra_widget (GTK_FILE_CHOOSER (filechooser), _lib_import_get_extra_widget(&metadata, TRUE));

  // run the dialog
  if (gtk_dialog_run (GTK_DIALOG (filechooser)) == GTK_RESPONSE_ACCEPT)
  {
    dt_conf_set_string("ui_last/import_last_directory", gtk_file_chooser_get_current_folder(GTK_FILE_CHOOSER (filechooser)));
    _lib_import_evaluate_extra_widget(&metadata, TRUE);

    char *filename = NULL, *first_filename = NULL;
    GSList *list = gtk_file_chooser_get_filenames (GTK_FILE_CHOOSER (filechooser));
    GSList *it = list;

    /* reset filter to display all images, otherwise view may remain empty */
    dt_view_filter_reset_to_show_all(darktable.view_manager);

    /* for each selected folder add import job */
    while(it)
    {
      filename = (char *)it->data;
      dt_film_import(filename);
      if (!first_filename)
      {
        first_filename = g_strdup(filename);
        if(gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON (metadata.recursive)))
          first_filename = dt_util_dstrcat(first_filename, "%%");
      }
      g_free (filename);
      it = g_slist_next(it);
    }

    /* update collection to view import */
    if (first_filename)
    {
      dt_conf_set_int("plugins/lighttable/collect/num_rules", 1);
      dt_conf_set_int("plugins/lighttable/collect/item0", 0);
      dt_conf_set_string("plugins/lighttable/collect/string0",first_filename);
      dt_collection_update_query(darktable.collection);
      g_free(first_filename);
    }


    g_slist_free (list);
  }
  gtk_widget_destroy(metadata.frame);
  gtk_widget_destroy (filechooser);
  gtk_widget_queue_draw(dt_ui_center(darktable.gui->ui));
}
开发者ID:ealasu,项目名称:darktable,代码行数:64,代码来源:import.c


示例12: show

  bool show(Display* parent) override {
    static std::string s_lastUsedDir;
    if (s_lastUsedDir.empty())
      s_lastUsedDir = g_get_user_special_dir(G_USER_DIRECTORY_DESKTOP);

    const char* okLabel;
    GtkFileChooserAction action;

    switch (m_type) {
      case Type::OpenFile:
      case Type::OpenFiles:
        action = GTK_FILE_CHOOSER_ACTION_OPEN;
        okLabel = "_Open";
        break;
      case Type::OpenFolder:
        action = GTK_FILE_CHOOSER_ACTION_SELECT_FOLDER;
        okLabel = "_Open Folder";
        break;
      case Type::SaveFile:
        action = GTK_FILE_CHOOSER_ACTION_SAVE;
        okLabel = "_Save";
        break;
    }

    // GtkWindow* gtkParent = nullptr;
    GtkWidget* dialog = gtk_file_chooser_dialog_new(
      m_title.c_str(),
      nullptr,
      action,
      "_Cancel", GTK_RESPONSE_CANCEL,
      okLabel, GTK_RESPONSE_ACCEPT,
      nullptr);

    gtk_dialog_set_default_response(GTK_DIALOG(dialog), GTK_RESPONSE_OK);

    GtkFileChooser* chooser = GTK_FILE_CHOOSER(dialog);
    m_chooser = chooser;

    if (m_type == Type::SaveFile)
      gtk_file_chooser_set_do_overwrite_confirmation(chooser, TRUE);
    else if (m_type == Type::OpenFiles)
      gtk_file_chooser_set_select_multiple(chooser, true);

    if (m_type != Type::OpenFolder) {
      setupFilters(base::get_file_extension(m_filename));
      setupPreview();
    }

    if (m_initialDir.empty())
      gtk_file_chooser_set_current_folder(chooser, s_lastUsedDir.c_str());
    else
      gtk_file_chooser_set_current_folder(chooser, m_initialDir.c_str());

    if (!m_filename.empty()) {
      std::string fn = m_filename;
      // Add default extension
      if (m_type == Type::SaveFile && base::get_file_extension(fn).empty()) {
        fn.push_back('.');
        fn += m_defExtension;
      }
      gtk_file_chooser_set_current_name(chooser, fn.c_str());
    }

    // Setup the "parent" display as the parent of the dialog (we've
    // to convert a X11 Window into a GdkWindow to do this).
    GdkWindow* gdkParentWindow = nullptr;
    if (parent) {
      GdkWindow* gdkWindow = gtk_widget_get_root_window(dialog);

      gdkParentWindow =
        gdk_x11_window_foreign_new_for_display(
          gdk_window_get_display(gdkWindow),
          (::Window)parent->nativeHandle());

      gtk_window_set_position(GTK_WINDOW(dialog), GTK_WIN_POS_CENTER_ON_PARENT);
      gdk_window_set_transient_for(gdkWindow, gdkParentWindow);
    }
    else {
      gtk_window_set_position(GTK_WINDOW(dialog), GTK_WIN_POS_CENTER);
    }

    // Show the dialog
    gint res = gtk_dialog_run(GTK_DIALOG(dialog));
    if (res == GTK_RESPONSE_ACCEPT) {
      s_lastUsedDir = gtk_file_chooser_get_current_folder(chooser);
      m_filename = gtk_file_chooser_get_filename(chooser);

      if (m_type == Type::OpenFiles) {
        GSList* list = gtk_file_chooser_get_filenames(chooser);
        g_slist_foreach(
          list,
          [](void* fn, void* userdata){
            auto self = (FileDialogGTK*)userdata;
            self->m_filenames.push_back((char*)fn);
            g_free(fn);
          }, this);
        g_slist_free(list);
      }
    }

//.........这里部分代码省略.........
开发者ID:imeteora,项目名称:aseprite,代码行数:101,代码来源:native_dialogs.cpp


示例13: ags_machine_open_extended_response_callback

void
ags_machine_open_extended_response_callback(GtkWidget *widget, gint response, AgsMachine *machine)
{
  GtkFileChooserDialog *file_chooser;
  AgsFileSelection *file_selection;
  GtkCheckButton *overwrite;
  GtkCheckButton *create;
  GSList *filenames;
  gchar *current_folder;
  GError *error;

  file_chooser = (GtkFileChooserDialog *) gtk_widget_get_toplevel(widget);

  if(response == GTK_RESPONSE_ACCEPT){
    filenames = gtk_file_chooser_get_filenames(GTK_FILE_CHOOSER(file_chooser));
    overwrite = g_object_get_data((GObject *) widget, "overwrite\0");
    create = g_object_get_data((GObject *) widget, "create\0");

    current_folder = gtk_file_chooser_get_current_folder(GTK_FILE_CHOOSER(file_chooser));
    //TODO:JK: you need to check against recently used
    //TODO:JK: add more file types to AgsFileSelection

    /* check for supported packed audio files */
    file_selection = (AgsFileSelection *) gtk_file_chooser_get_extra_widget(GTK_FILE_CHOOSER(file_chooser));

    if(file_selection != NULL && g_strcmp0(file_selection->directory, current_folder)){
      gtk_widget_destroy(GTK_WIDGET(file_selection));

      file_selection = NULL;
    }

    if(file_selection == NULL ||
       (AGS_FILE_SELECTION_COMPLETED & (file_selection->flags)) == 0){

      if((AGS_MACHINE_ACCEPT_SOUNDFONT2 & (machine->file_input_flags)) != 0){
	GDir *current_directory;
	GList *new_entry, *old_entry;	  
	GSList *slist;
	gchar *current_filename;
	
	slist = filenames;
	new_entry = NULL;
	
	while(slist != NULL){
	  if(g_str_has_suffix(slist->data,
			      ".sf2\0")){
	    AgsFileSelectionEntry *entry;
	    
	    
	    entry = ags_file_selection_entry_alloc();
	    entry->filename = slist->data;
	  
	    new_entry = g_list_prepend(new_entry,
				       entry);
	  }
	  
	  slist = slist->next;
	}
	
	old_entry = NULL;
	
	if(file_selection == NULL){
	  if(new_entry != NULL){
	    file_selection = ags_file_selection_new();
	    gtk_file_chooser_set_extra_widget(GTK_FILE_CHOOSER(file_chooser),
					      GTK_WIDGET(file_selection));

	    ags_file_selection_set_entry(file_selection,
					 new_entry);
	    ags_connectable_connect(AGS_CONNECTABLE(file_selection));

	    gtk_widget_show_all(GTK_WIDGET(file_selection));

	    return;
	  }
	}else if(AGS_IS_FILE_SELECTION(file_selection)){
	  GList *really_new_entry;
	  GList *list;
	  
	  old_entry = file_selection->entry;
	  list = new_entry;
	  really_new_entry = NULL;
	  
	  /* check against existing entries */
	  if(new_entry != NULL){
	    while(list != NULL){
	      if(g_list_find(old_entry, list->data) == NULL){
		really_new_entry = g_list_prepend(really_new_entry,
						  list->data);
	      }else{
		free(list->data);
	      }
	      
	      list = list->next;
	    }
	    
	    g_list_free(new_entry);
	  }
	  
	  ags_file_selection_set_entry(file_selection,
//.........这里部分代码省略.........
开发者ID:weedlight,项目名称:ags,代码行数:101,代码来源:ags_machine_callbacks.c


示例14: save_dialog_response_cb

static void
save_dialog_response_cb (GtkDialog * dialog,
                         gint response_id, GtrWindow * window)
{
  GError *error = NULL;
  GtrPo *po;
  GtrTab *tab;
  gchar *filename;
  GFile *location;
  GtrStatusbar *status;

  tab = GTR_TAB (g_object_get_data (G_OBJECT (dialog), GTR_TAB_SAVE_AS));

  g_return_if_fail (GTK_IS_FILE_CHOOSER (dialog));

  po = gtr_tab_get_po (tab);

  if (response_id != GTK_RESPONSE_ACCEPT)
    {
      gtk_widget_destroy (GTK_WIDGET (dialog));
      return;
    }

  filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER (dialog));
  g_return_if_fail (filename != NULL);

  location = g_file_new_for_path (filename);
  g_free (filename);

  gtk_widget_destroy (GTK_WIDGET (dialog));

  if (po != NULL)
    {
      gtr_po_set_location (po, location);

      g_object_unref (location);

      gtr_po_save_file (po, &error);

      if (error)
        {
          GtkWidget *dialog;
          dialog = gtk_message_dialog_new (GTK_WINDOW (window),
                                           GTK_DIALOG_DESTROY_WITH_PARENT,
                                           GTK_MESSAGE_WARNING,
                                           GTK_BUTTONS_OK,
                                           "%s", error->message);
          gtk_dialog_run (GTK_DIALOG (dialog));
          gtk_widget_destroy (dialog);
          g_clear_error (&error);
          return;
        }

      /* We have to change the state of the tab */
      gtr_po_set_state (po, GTR_PO_STATE_SAVED);

      /* Flash a message */
      status = GTR_STATUSBAR (gtr_window_get_statusbar (window));
      gtr_statusbar_flash_message (status, 0, _("File saved."));
    }
  g_object_unref (location);
}
开发者ID:chavaone,项目名称:gtranslator,代码行数:62,代码来源:gtr-actions-file.c


示例15: impl_constructed

static void
impl_constructed (GObject *object)
{
	RBImportDialog *dialog;
	RhythmDBQuery *query;
	GtkBuilder *builder;
	GSettings *settings;
	char **locations;

	RB_CHAIN_GOBJECT_METHOD (rb_import_dialog_parent_class, constructed, object);
	dialog = RB_IMPORT_DIALOG (object);

	g_object_get (dialog->priv->shell,
		      "db", &dialog->priv->db,
		      "shell-player", &dialog->priv->shell_player,
		      NULL);

	/* create entry types */
	dialog->priv->entry_type = g_object_new (rb_import_dialog_entry_type_get_type (),
						 "db", dialog->priv->db,
						 "name", "import-dialog",
						 NULL);
	dialog->priv->ignore_type = g_object_new (rb_import_dialog_ignore_type_get_type (),
						  "db", dialog->priv->db,
						  "name", "import-dialog-ignore",
						  NULL);
	rhythmdb_register_entry_type (dialog->priv->db, dialog->priv->entry_type);
	rhythmdb_register_entry_type (dialog->priv->db, dialog->priv->ignore_type);


	builder = rb_builder_load ("import-dialog.ui", NULL);

	dialog->priv->import_button = GTK_WIDGET (gtk_builder_get_object (builder, "import-button"));
	g_signal_connect_object (dialog->priv->import_button, "clicked", G_CALLBACK (import_clicked_cb), dialog, 0);
	gtk_widget_set_sensitive (dialog->priv->import_button, FALSE);

	dialog->priv->copy_check = GTK_WIDGET (gtk_builder_get_object (builder, "copy-check"));

	g_signal_connect (gtk_builder_get_object (builder, "close-button"),
			  "clicked",
			  G_CALLBACK (close_clicked_cb),
			  dialog);

	dialog->priv->file_chooser = GTK_WIDGET (gtk_builder_get_object (builder, "file-chooser-button"));
	
	/* select the first library location, since the default may be
	 * the user's home dir or / or something that will take forever to scan.
	 */
	settings = g_settings_new ("org.gnome.rhythmbox.rhythmdb");
	locations = g_settings_get_strv (settings, "locations");
	if (locations[0] != NULL) {
		dialog->priv->current_uri = g_strdup (locations[0]);
	} else {
		dialog->priv->current_uri = g_filename_to_uri (rb_music_dir (), NULL, NULL);
	}
	gtk_file_chooser_set_current_folder_uri (GTK_FILE_CHOOSER (dialog->priv->file_chooser),
						 dialog->priv->current_uri);
	g_strfreev (locations);
	g_object_unref (settings);

	g_signal_connect_object (dialog->priv->file_chooser, "selection-changed", G_CALLBACK (current_folder_changed_cb), dialog, 0);

	/* not sure why we have to set this, it should be the default */
	gtk_widget_set_vexpand (gtk_widget_get_parent (dialog->priv->file_chooser), FALSE);

	dialog->priv->info_bar_container = GTK_WIDGET (gtk_builder_get_object (builder, "info-bar-container"));

	/* set up entry view */
	dialog->priv->entry_view = rb_entry_view_new (dialog->priv->db, G_OBJECT (dialog->priv->shell_player), TRUE, FALSE);

	g_signal_connect (dialog->priv->entry_view, "entry-activated", G_CALLBACK (entry_activated_cb), dialog);
	g_signal_connect (dialog->priv->entry_view, "selection-changed", G_CALLBACK (selection_changed_cb), dialog);

	rb_entry_view_append_column (dialog->priv->entry_view, RB_ENTRY_VIEW_CO 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ GTK_FILE_SELECTION函数代码示例发布时间:2022-05-30
下一篇:
C++ GTK_EXPANDER函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap