• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ GST_EVENT_TYPE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GST_EVENT_TYPE函数的典型用法代码示例。如果您正苦于以下问题:C++ GST_EVENT_TYPE函数的具体用法?C++ GST_EVENT_TYPE怎么用?C++ GST_EVENT_TYPE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GST_EVENT_TYPE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: vorbis_dec_sink_event

static gboolean
vorbis_dec_sink_event (GstPad * pad, GstEvent * event)
{
  gboolean ret = FALSE;
  GstVorbisDec *dec;

  dec = GST_VORBIS_DEC (gst_pad_get_parent (pad));

  GST_LOG_OBJECT (dec, "handling event");
  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_EOS:
      if (dec->segment.rate < 0.0)
        vorbis_dec_chain_reverse (dec, TRUE, NULL);
      ret = gst_pad_push_event (dec->srcpad, event);
      break;
    case GST_EVENT_FLUSH_START:
      ret = gst_pad_push_event (dec->srcpad, event);
      break;
    case GST_EVENT_FLUSH_STOP:
      /* here we must clean any state in the decoder */
#ifdef HAVE_VORBIS_SYNTHESIS_RESTART
      vorbis_synthesis_restart (&dec->vd);
#endif
      gst_vorbis_dec_reset (dec);
      ret = gst_pad_push_event (dec->srcpad, event);
      break;
    case GST_EVENT_NEWSEGMENT:
    {
      GstFormat format;
      gdouble rate, arate;
      gint64 start, stop, time;
      gboolean update;

      gst_event_parse_new_segment_full (event, &update, &rate, &arate, &format,
          &start, &stop, &time);

      /* we need time for now */
      if (format != GST_FORMAT_TIME)
        goto newseg_wrong_format;

      GST_DEBUG_OBJECT (dec,
          "newsegment: update %d, rate %g, arate %g, start %" GST_TIME_FORMAT
          ", stop %" GST_TIME_FORMAT ", time %" GST_TIME_FORMAT,
          update, rate, arate, GST_TIME_ARGS (start), GST_TIME_ARGS (stop),
          GST_TIME_ARGS (time));

      /* now configure the values */
      gst_segment_set_newsegment_full (&dec->segment, update,
          rate, arate, format, start, stop, time);
      dec->seqnum = gst_event_get_seqnum (event);

      if (dec->initialized)
        /* and forward */
        ret = gst_pad_push_event (dec->srcpad, event);
      else {
        /* store it to send once we're initialized */
        dec->pendingevents = g_list_append (dec->pendingevents, event);
        ret = TRUE;
      }
      break;
    }
    case GST_EVENT_TAG:
    {
      if (dec->initialized)
        /* and forward */
        ret = gst_pad_push_event (dec->srcpad, event);
      else {
        /* store it to send once we're initialized */
        dec->pendingevents = g_list_append (dec->pendingevents, event);
        ret = TRUE;
      }
      break;
    }
    default:
      ret = gst_pad_push_event (dec->srcpad, event);
      break;
  }
done:
  gst_object_unref (dec);

  return ret;

  /* ERRORS */
newseg_wrong_format:
  {
    GST_DEBUG_OBJECT (dec, "received non TIME newsegment");
    goto done;
  }
}
开发者ID:spunktsch,项目名称:svtplayer,代码行数:89,代码来源:gstvorbisdec.c


示例2: dxr3videosink_handle_event

static gboolean
dxr3videosink_handle_event (GstPad * pad, GstEvent * event)
{
  GstEventType type;
  Dxr3VideoSink *sink;

  sink = DXR3VIDEOSINK (gst_pad_get_parent (pad));

  type = event ? GST_EVENT_TYPE (event) : GST_EVENT_UNKNOWN;

  switch (type) {
    case GST_EVENT_EMPTY:
      //fprintf (stderr, "++++++ Video empty event\n");
    {
      /* FIXME: Handle this with a discontinuity or something. */
      /* Write an MPEG2 sequence end code, to ensure that the card
         actually displays the last picture.  Apparently some DVDs are
         encoded without proper sequence end codes. */
      static const guint8 sec[4] = { 0x00, 0x00, 0x01, 0xb7 };

      if (sink->cur_buf != NULL) {
        dxr3videosink_write_data (sink, 0);
      }

      write (sink->video_fd, &sec, 4);
    }
      break;

    case GST_EVENT_DISCONTINUOUS:
      //fprintf (stderr, "++++++ Video discont event\n");
    {
      gint64 time;
      gboolean has_time;
      unsigned cur_scr, mpeg_scr, diff;

      has_time = gst_event_discont_get_value (event, GST_FORMAT_TIME, &time);
      if (has_time) {
/*         fprintf (stderr, "^^^^^^ Discontinuous event has time %.4f\n", */
/*                  (double) time / GST_SECOND); */

        /* If the SCR in the card is way off, fix it. */
        ioctl (sink->control_fd, EM8300_IOCTL_SCR_GET, &cur_scr);
        mpeg_scr = MPEGTIME_TO_DXRTIME (GSTTIME_TO_MPEGTIME (time));

        diff = cur_scr > mpeg_scr ? cur_scr - mpeg_scr : mpeg_scr - cur_scr;
        if (diff > 1800) {
          unsigned zero = 0;

/*           fprintf (stderr, "====== Adjusting SCR from video\n"); */

          ioctl (sink->control_fd, EM8300_IOCTL_SCR_SET, &zero);
          ioctl (sink->control_fd, EM8300_IOCTL_SCR_SET, &mpeg_scr);
        }
      } else {
/*         fprintf (stderr, "^^^^^^ Discontinuous event has no time\n"); */
      }
    }
      break;

    case GST_EVENT_FLUSH:
      dxr3videosink_reset_parser (sink);
      break;

    default:
      gst_pad_event_default (pad, event);
      break;
  }

  return TRUE;
}
开发者ID:Distrotech,项目名称:gst-plugins-bad,代码行数:70,代码来源:dxr3videosink.c


示例3: handle_mq_input

static GstPadProbeReturn
handle_mq_input (GstPad * pad, GstPadProbeInfo * info, MqStreamCtx * ctx)
{
  GstSplitMuxSink *splitmux = ctx->splitmux;
  GstBuffer *buf;
  MqStreamBuf *buf_info = NULL;
  GstClockTime ts;
  gboolean loop_again;
  gboolean keyframe = FALSE;

  GST_LOG_OBJECT (pad, "Fired probe type 0x%x\n", info->type);

  /* FIXME: Handle buffer lists, until then make it clear they won't work */
  if (info->type & GST_PAD_PROBE_TYPE_BUFFER_LIST) {
    g_warning ("Buffer list handling not implemented");
    return GST_PAD_PROBE_DROP;
  }
  if (info->type & GST_PAD_PROBE_TYPE_EVENT_DOWNSTREAM) {
    GstEvent *event = gst_pad_probe_info_get_event (info);
    switch (GST_EVENT_TYPE (event)) {
      case GST_EVENT_SEGMENT:
        gst_event_copy_segment (event, &ctx->in_segment);
        break;
      case GST_EVENT_FLUSH_STOP:
        GST_SPLITMUX_LOCK (splitmux);
        gst_segment_init (&ctx->in_segment, GST_FORMAT_UNDEFINED);
        ctx->in_eos = FALSE;
        ctx->in_bytes = 0;
        ctx->in_running_time = 0;
        GST_SPLITMUX_UNLOCK (splitmux);
        break;
      case GST_EVENT_EOS:
        GST_SPLITMUX_LOCK (splitmux);
        ctx->in_eos = TRUE;

        if (splitmux->state == SPLITMUX_STATE_STOPPED)
          goto beach;

        if (ctx->is_video) {
          GST_INFO_OBJECT (splitmux, "Got Video EOS. Finishing up");
          /* Act as if this is a new keyframe with infinite timestamp */
          splitmux->max_in_running_time = GST_CLOCK_TIME_NONE;
          splitmux->state = SPLITMUX_STATE_WAITING_GOP_COMPLETE;
          /* Wake up other input pads to collect this GOP */
          GST_SPLITMUX_BROADCAST (splitmux);
          check_completed_gop (splitmux, ctx);
        } else if (splitmux->state == SPLITMUX_STATE_WAITING_GOP_COMPLETE) {
          /* If we are waiting for a GOP to be completed (ie, for aux
           * pads to catch up), then this pad is complete, so check
           * if the whole GOP is.
           */
          check_completed_gop (splitmux, ctx);
        }
        GST_SPLITMUX_UNLOCK (splitmux);
        break;
      default:
        break;
    }
    return GST_PAD_PROBE_PASS;
  }

  buf = gst_pad_probe_info_get_buffer (info);
  ctx->in_running_time = gst_segment_to_running_time (&ctx->in_segment,
      GST_FORMAT_TIME, GST_BUFFER_TIMESTAMP (buf));
  buf_info = mq_stream_buf_new ();

  if (GST_BUFFER_PTS_IS_VALID (buf))
    ts = GST_BUFFER_PTS (buf);
  else
    ts = GST_BUFFER_DTS (buf);

  GST_SPLITMUX_LOCK (splitmux);

  if (splitmux->state == SPLITMUX_STATE_STOPPED)
    goto beach;

  /* If this buffer has a timestamp, advance the input timestamp of the
   * stream */
  if (GST_CLOCK_TIME_IS_VALID (ts)) {
    GstClockTime running_time =
        gst_segment_to_running_time (&ctx->in_segment, GST_FORMAT_TIME,
        GST_BUFFER_TIMESTAMP (buf));

    if (GST_CLOCK_TIME_IS_VALID (running_time) &&
        (ctx->in_running_time == GST_CLOCK_TIME_NONE
            || running_time > ctx->in_running_time))
      ctx->in_running_time = running_time;
  }

  /* Try to make sure we have a valid running time */
  if (!GST_CLOCK_TIME_IS_VALID (ctx->in_running_time)) {
    ctx->in_running_time =
        gst_segment_to_running_time (&ctx->in_segment, GST_FORMAT_TIME,
        ctx->in_segment.start);
  }

  buf_info->run_ts = ctx->in_running_time;
  buf_info->buf_size = gst_buffer_get_size (buf);

  /* Update total input byte counter for overflow detect */
//.........这里部分代码省略.........
开发者ID:BigBrother-International,项目名称:gst-plugins-good,代码行数:101,代码来源:gstsplitmuxsink.c


示例4: pad_event

static gboolean
pad_event (GstPad *pad,
           GstEvent *event)
{
    GstOmxBaseFilter *self;
    GOmxCore *gomx;
    GOmxPort *in_port;
    gboolean ret = TRUE;

    self = GST_OMX_BASE_FILTER (GST_OBJECT_PARENT (pad));
    gomx = self->gomx;
    in_port = self->in_port;

    GST_LOG_OBJECT (self, "begin");

    GST_INFO_OBJECT (self, "event: %s", GST_EVENT_TYPE_NAME (event));

    switch (GST_EVENT_TYPE (event))
    {
        case GST_EVENT_EOS:
            /* if we are init'ed, and there is a running loop; then
             * if we get a buffer to inform it of EOS, let it handle the rest
             * in any other case, we send EOS */
            if (self->ready && self->last_pad_push_return == GST_FLOW_OK)
            {
                /* send buffer with eos flag */
                /** @todo move to util */
                {
                    OMX_BUFFERHEADERTYPE *omx_buffer;

                    GST_LOG_OBJECT (self, "request buffer");
                    omx_buffer = g_omx_port_request_buffer (in_port);

                    if (G_LIKELY (omx_buffer))
                    {
                        omx_buffer->nFlags |= OMX_BUFFERFLAG_EOS;

                        GST_LOG_OBJECT (self, "release_buffer");
                        /* foo_buffer_untaint (omx_buffer); */
                        g_omx_port_release_buffer (in_port, omx_buffer);
                        /* loop handles EOS, eat it here */
                        gst_event_unref (event);
                        break;
                    }
                }
            }

            /* we tried, but it's up to us here */
            ret = gst_pad_push_event (self->srcpad, event);
            break;

        case GST_EVENT_FLUSH_START:
            gst_pad_push_event (self->srcpad, event);
            self->last_pad_push_return = GST_FLOW_WRONG_STATE;

            g_omx_core_flush_start (gomx);

            gst_pad_pause_task (self->srcpad);

            ret = TRUE;
            break;

        case GST_EVENT_FLUSH_STOP:
            gst_pad_push_event (self->srcpad, event);
            self->last_pad_push_return = GST_FLOW_OK;

            g_omx_core_flush_stop (gomx);

            if (self->ready)
                gst_pad_start_task (self->srcpad, output_loop, self->srcpad);

            ret = TRUE;
            break;

        case GST_EVENT_NEWSEGMENT:
            ret = gst_pad_push_event (self->srcpad, event);
            break;

        default:
            ret = gst_pad_push_event (self->srcpad, event);
            break;
    }

    GST_LOG_OBJECT (self, "end");

    return ret;
}
开发者ID:roopar,项目名称:gst-openmax,代码行数:87,代码来源:gstomx_base_filter.c


示例5: celt_dec_sink_event

static gboolean
celt_dec_sink_event (GstPad * pad, GstEvent * event)
{
  GstCeltDec *dec;
  gboolean ret = FALSE;

  dec = GST_CELT_DEC (gst_pad_get_parent (pad));

  GST_LOG_OBJECT (dec, "handling %s event", GST_EVENT_TYPE_NAME (event));

  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_NEWSEGMENT:{
      GstFormat format;
      gdouble rate, arate;
      gint64 start, stop, time;
      gboolean update;

      gst_event_parse_new_segment_full (event, &update, &rate, &arate, &format,
          &start, &stop, &time);

      if (format != GST_FORMAT_TIME)
        goto newseg_wrong_format;

      if (rate <= 0.0)
        goto newseg_wrong_rate;

      if (update) {
        /* time progressed without data, see if we can fill the gap with
         * some concealment data */
        if (dec->segment.last_stop < start) {
          GstClockTime duration;

          duration = start - dec->segment.last_stop;
          celt_dec_chain_parse_data (dec, NULL, dec->segment.last_stop,
              duration);
        }
      }

      /* now configure the values */
      gst_segment_set_newsegment_full (&dec->segment, update,
          rate, arate, GST_FORMAT_TIME, start, stop, time);

      dec->granulepos = -1;

      GST_DEBUG_OBJECT (dec, "segment now: cur = %" GST_TIME_FORMAT " [%"
          GST_TIME_FORMAT " - %" GST_TIME_FORMAT "]",
          GST_TIME_ARGS (dec->segment.last_stop),
          GST_TIME_ARGS (dec->segment.start),
          GST_TIME_ARGS (dec->segment.stop));

      ret = gst_pad_push_event (dec->srcpad, event);
      break;
    }
    default:
      ret = gst_pad_event_default (pad, event);
      break;
  }

  gst_object_unref (dec);
  return ret;

  /* ERRORS */
newseg_wrong_format:
  {
    GST_DEBUG_OBJECT (dec, "received non TIME newsegment");
    gst_object_unref (dec);
    return FALSE;
  }
newseg_wrong_rate:
  {
    GST_DEBUG_OBJECT (dec, "negative rates not supported yet");
    gst_object_unref (dec);
    return FALSE;
  }
}
开发者ID:prajnashi,项目名称:gst-plugins-bad,代码行数:75,代码来源:gstceltdec.c


示例6: rsn_audiomunge_sink_event

static gboolean
rsn_audiomunge_sink_event (GstPad * pad, GstEvent * event)
{
  gboolean ret = FALSE;
  RsnAudioMunge *munge = RSN_AUDIOMUNGE (gst_pad_get_parent (pad));

  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_FLUSH_STOP:
      rsn_audiomunge_reset (munge);
      ret = gst_pad_push_event (munge->srcpad, event);
      break;
    case GST_EVENT_NEWSEGMENT:
    {
      GstSegment *segment;
      gboolean update;
      GstFormat format;
      gdouble rate, arate;
      gint64 start, stop, time;

      gst_event_parse_new_segment_full (event, &update, &rate, &arate, &format,
          &start, &stop, &time);

      /* we need TIME format */
      if (format != GST_FORMAT_TIME)
        goto newseg_wrong_format;

      /* now configure the values */
      segment = &munge->sink_segment;

      gst_segment_set_newsegment_full (segment, update,
          rate, arate, format, start, stop, time);

      if (munge->have_audio) {
        ret = gst_pad_push_event (munge->srcpad, event);
        break;
      }

      /*
       * FIXME:
       * If the accum >= threshold or we're in a still frame and there's been
       * no audio received, then we need to generate some audio data.
       * If caused by a segment start update (time advancing in a gap) adjust
       * the new-segment and send the buffer.
       *
       * Otherwise, send the buffer before the newsegment, so that it appears
       * in the closing segment.
       */
      if (!update) {
        GST_DEBUG_OBJECT (munge, "Sending newsegment: start %" GST_TIME_FORMAT
            " stop %" GST_TIME_FORMAT " accum now %" GST_TIME_FORMAT,
            GST_TIME_ARGS (start), GST_TIME_ARGS (stop),
            GST_TIME_ARGS (segment->accum));

        ret = gst_pad_push_event (munge->srcpad, event);
      }

      if (segment->accum >= AUDIO_FILL_THRESHOLD || munge->in_still) {
        g_print ("***********  Sending audio fill: accum = %" GST_TIME_FORMAT
            " still-state=%d\n", GST_TIME_ARGS (segment->accum),
            munge->in_still);

        /* Just generate a 100ms silence buffer for now. FIXME: Fill the gap */
        if (rsn_audiomunge_make_audio (munge, segment->start,
                GST_SECOND / 10) == GST_FLOW_OK)
          munge->have_audio = TRUE;
      } else {
        GST_LOG_OBJECT (munge, "Not sending audio fill buffer: "
            "segment accum below thresh: accum = %" GST_TIME_FORMAT,
            GST_TIME_ARGS (segment->accum));
      }

      if (update) {
        GST_DEBUG_OBJECT (munge, "Sending newsegment: start %" GST_TIME_FORMAT
            " stop %" GST_TIME_FORMAT " accum now %" GST_TIME_FORMAT,
            GST_TIME_ARGS (start), GST_TIME_ARGS (stop),
            GST_TIME_ARGS (segment->accum));

        ret = gst_pad_push_event (munge->srcpad, event);
      }

      break;
    }
    case GST_EVENT_CUSTOM_DOWNSTREAM:
    {
      const GstStructure *s = gst_event_get_structure (event);

      if (s && gst_structure_has_name (s, "application/x-gst-dvd"))
        rsn_audiomunge_handle_dvd_event (munge, event);

      ret = gst_pad_push_event (munge->srcpad, event);
      break;
    }
    default:
      ret = gst_pad_push_event (munge->srcpad, event);
      break;
  }

  return ret;

newseg_wrong_format:
//.........这里部分代码省略.........
开发者ID:prajnashi,项目名称:gst-plugins-bad,代码行数:101,代码来源:rsnaudiomunge.c


示例7: gst_base_video_codec_src_event

static gboolean
gst_base_video_codec_src_event (GstPad * pad, GstEvent * event)
{
  GstBaseVideoCodec *base_video_codec;
  gboolean res = FALSE;

  base_video_codec = GST_BASE_VIDEO_CODEC (gst_pad_get_parent (pad));

  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_SEEK:
    {
      GstFormat format, tformat;
      gdouble rate;
      GstEvent *real_seek;
      GstSeekFlags flags;
      GstSeekType cur_type, stop_type;
      gint64 cur, stop;
      gint64 tcur, tstop;

      gst_event_parse_seek (event, &rate, &format, &flags, &cur_type,
          &cur, &stop_type, &stop);
      gst_event_unref (event);

      tformat = GST_FORMAT_TIME;
      res = gst_base_video_encoded_video_convert (&base_video_codec->state,
          format, cur, &tformat, &tcur);
      if (!res)
        goto convert_error;
      res = gst_base_video_encoded_video_convert (&base_video_codec->state,
          format, stop, &tformat, &tstop);
      if (!res)
        goto convert_error;

      real_seek = gst_event_new_seek (rate, GST_FORMAT_TIME,
          flags, cur_type, tcur, stop_type, tstop);

      res = gst_pad_push_event (base_video_codec->sinkpad, real_seek);

      break;
    }
#if 0
    case GST_EVENT_QOS:
    {
      gdouble proportion;
      GstClockTimeDiff diff;
      GstClockTime timestamp;

      gst_event_parse_qos (event, &proportion, &diff, &timestamp);

      GST_OBJECT_LOCK (base_video_codec);
      base_video_codec->proportion = proportion;
      base_video_codec->earliest_time = timestamp + diff;
      GST_OBJECT_UNLOCK (base_video_codec);

      GST_DEBUG_OBJECT (base_video_codec,
          "got QoS %" GST_TIME_FORMAT ", %" G_GINT64_FORMAT,
          GST_TIME_ARGS (timestamp), diff);

      res = gst_pad_push_event (base_video_codec->sinkpad, event);
      break;
    }
#endif
    default:
      res = gst_pad_push_event (base_video_codec->sinkpad, event);
      break;
  }
done:
  gst_object_unref (base_video_codec);
  return res;

convert_error:
  GST_DEBUG_OBJECT (base_video_codec, "could not convert format");
  goto done;
}
开发者ID:PeterXu,项目名称:gst-mobile,代码行数:74,代码来源:gstbasevideocodec.c


示例8: gst_interlace_sink_event

static gboolean
gst_interlace_sink_event (GstPad * pad, GstObject * parent, GstEvent * event)
{
  gboolean ret;
  GstInterlace *interlace;

  interlace = GST_INTERLACE (parent);

  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_FLUSH_START:
      GST_DEBUG_OBJECT (interlace, "handling FLUSH_START");
      ret = gst_pad_push_event (interlace->srcpad, event);
      break;
    case GST_EVENT_FLUSH_STOP:
      GST_DEBUG_OBJECT (interlace, "handling FLUSH_STOP");
      gst_interlace_reset (interlace);
      ret = gst_pad_push_event (interlace->srcpad, event);
      break;
    case GST_EVENT_EOS:
#if 0
      /* FIXME revive this when we output ONEFIELD and RFF buffers */
    {
      gint num_fields;
      const PulldownFormat *format = &formats[interlace->pattern];

      num_fields =
          format->n_fields[interlace->phase_index] -
          interlace->stored_fields_pushed;
      interlace->stored_fields_pushed = 0;

      /* on EOS we want to push as many sane frames as are left */
      while (num_fields > 1) {
        GstBuffer *output_buffer;

        /* make metadata writable before editing it */
        interlace->stored_frame =
            gst_buffer_make_metadata_writable (interlace->stored_frame);
        num_fields -= 2;

        gst_interlace_decorate_buffer (interlace, interlace->stored_frame,
            n_fields, FALSE);

        /* ref output_buffer/stored frame because we want to keep it for now
         * and pushing gives away a ref */
        output_buffer = gst_buffer_ref (interlace->stored_frame);
        if (gst_pad_push (interlace->srcpad, output_buffer)) {
          GST_DEBUG_OBJECT (interlace, "Failed to push buffer %p",
              output_buffer);
          return FALSE;
        }
        output_buffer = NULL;

        if (num_fields <= 1) {
          gst_buffer_unref (interlace->stored_frame);
          interlace->stored_frame = NULL;
          break;
        }
      }

      /* increment the phase index */
      interlace->phase_index++;
      if (!format->n_fields[interlace->phase_index]) {
        interlace->phase_index = 0;
      }
    }
#endif

      ret = gst_pad_push_event (interlace->srcpad, event);
      break;
    case GST_EVENT_CAPS:
    {
      GstCaps *caps;

      gst_event_parse_caps (event, &caps);
      ret = gst_interlace_setcaps (interlace, caps);
      gst_event_unref (event);
      break;
    }
    default:
      ret = gst_pad_push_event (interlace->srcpad, event);
      break;
  }

  return ret;
}
开发者ID:jcaden,项目名称:gst-plugins-bad,代码行数:85,代码来源:gstinterlace.c


示例9: _sink_event

/* GstAggregator vmethods default implementations */
static gboolean
_sink_event (GstAggregator * self, GstAggregatorPad * aggpad, GstEvent * event)
{
  gboolean res = TRUE;
  GstPad *pad = GST_PAD (aggpad);
  GstAggregatorPrivate *priv = self->priv;

  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_FLUSH_START:
    {
      _flush_start (self, aggpad, event);
      /* We forward only in one case: right after flush_seeking */
      event = NULL;
      goto eat;
    }
    case GST_EVENT_FLUSH_STOP:
    {
      GST_DEBUG_OBJECT (aggpad, "Got FLUSH_STOP");

      _aggpad_flush (aggpad, self);
      if (g_atomic_int_get (&priv->flush_seeking)) {
        g_atomic_int_set (&aggpad->priv->pending_flush_stop, FALSE);

        if (g_atomic_int_get (&priv->flush_seeking)) {
          if (_all_flush_stop_received (self)) {
            /* That means we received FLUSH_STOP/FLUSH_STOP on
             * all sinkpads -- Seeking is Done... sending FLUSH_STOP */
            _flush (self);
            gst_pad_push_event (self->srcpad, event);
            priv->send_eos = TRUE;
            event = NULL;
            QUEUE_PUSH (self);

            GST_INFO_OBJECT (self, "Releasing source pad STREAM_LOCK");
            GST_PAD_STREAM_UNLOCK (self->srcpad);
            _start_srcpad_task (self);
          }
        }
      }

      /* We never forward the event */
      goto eat;
    }
    case GST_EVENT_EOS:
    {
      GST_DEBUG_OBJECT (aggpad, "EOS");

      /* We still have a buffer, and we don't want the subclass to have to
       * check for it. Mark pending_eos, eos will be set when steal_buffer is
       * called
       */
      PAD_LOCK_EVENT (aggpad);
      if (!aggpad->buffer) {
        aggpad->eos = TRUE;
      } else {
        aggpad->priv->pending_eos = TRUE;
      }
      PAD_UNLOCK_EVENT (aggpad);

      QUEUE_PUSH (self);
      goto eat;
    }
    case GST_EVENT_SEGMENT:
    {
      PAD_LOCK_EVENT (aggpad);
      gst_event_copy_segment (event, &aggpad->segment);
      self->priv->seqnum = gst_event_get_seqnum (event);
      PAD_UNLOCK_EVENT (aggpad);
      goto eat;
    }
    case GST_EVENT_STREAM_START:
    {
      goto eat;
    }
    case GST_EVENT_TAG:
    {
      GstTagList *tags;

      gst_event_parse_tag (event, &tags);

      if (gst_tag_list_get_scope (tags) == GST_TAG_SCOPE_STREAM) {
        gst_aggregator_merge_tags (self, tags, GST_TAG_MERGE_REPLACE);
        gst_event_unref (event);
        event = NULL;
        goto eat;
      }
      break;
    }
    default:
    {
      break;
    }
  }

  GST_DEBUG_OBJECT (pad, "Forwarding event: %" GST_PTR_FORMAT, event);
  return gst_pad_event_default (pad, GST_OBJECT (self), event);

eat:
  GST_DEBUG_OBJECT (pad, "Eating event: %" GST_PTR_FORMAT, event);
//.........这里部分代码省略.........
开发者ID:jledet,项目名称:gst-plugins-bad,代码行数:101,代码来源:gstaggregator.c


示例10: gst_merger_event_srcv

static gboolean
gst_merger_event_srcv (GstPad * pad, GstObject * parent, GstEvent * event)
{
  GstMerger *merger = GST_MERGER (parent);
  gboolean ret;

  GST_DEBUG_OBJECT (pad, "got source event %s", GST_EVENT_TYPE_NAME (event));

  switch (GST_EVENT_TYPE (event)) {

    case GST_EVENT_CAPS:
    {
      GstCaps *caps;

      gst_event_parse_caps (event, &caps);

      GST_DEBUG_OBJECT (pad, "event caps are %" GST_PTR_FORMAT, caps);

      break;
    }

    case GST_EVENT_EOS:
      process_eos (merger);
      gst_event_unref (event);
      ret = TRUE;
      break;
    case GST_EVENT_SEGMENT:
      gst_event_copy_segment (event, &merger->s_segment);
      GST_DEBUG_OBJECT (merger, "segment: %" GST_SEGMENT_FORMAT,
          &merger->s_segment);
      break;
    case GST_EVENT_QOS:
    {
      GstQOSType type;
      gdouble proportion;
      GstClockTimeDiff diff;
      GstClockTime timestamp;
      gst_event_parse_qos (event, &type, &proportion, &diff, &timestamp);

      if (type == GST_QOS_TYPE_UNDERFLOW) {
        GST_INFO_OBJECT (pad,
            "got QOS event UNDERFLOW proportion %f diff %" PRIu64 " ts %"
            PRIu64, proportion, diff, timestamp);
        GST_OBJECT_LOCK (merger);

        gint num, den;
        {
          GstCaps *caps = gst_pad_get_current_caps (merger->srcv_pad);
          GstStructure *s = gst_caps_get_structure (caps, 0);
          gst_structure_get_fraction (s, "framerate", &num, &den);
          gst_caps_unref (caps);
        }

        int nb_bufs = 0.5 + diff / (1e9 * den / num);
        GST_WARNING_OBJECT (merger, "Discarding %d buffers", nb_bufs);
        g_queue_pop_head (&merger->bufs_l);
        g_queue_pop_head (&merger->bufs_r);
        GST_OBJECT_UNLOCK (merger);
      } else {
        GST_WARNING_OBJECT (pad, "QOS type %d not implemented", type);
        ret = gst_pad_event_default (pad, parent, event);
      }
    }
      break;

    default:
      GST_INFO_OBJECT (pad, "got source event %s", GST_EVENT_TYPE_NAME (event));
      ret = gst_pad_event_default (pad, parent, event);
      break;
  }
  return ret;
}
开发者ID:exmakhina,项目名称:gstreamer-examples,代码行数:72,代码来源:gstplugin.c


示例11: gst_gme_dec_src_event

static gboolean
gst_gme_dec_src_event (GstPad * pad, GstObject * parent, GstEvent * event)
{
  GstGmeDec *gme = GST_GME_DEC (parent);
  gboolean result = FALSE;

  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_SEEK:
    {
      gdouble rate;
      GstFormat format;
      GstSeekFlags flags;
      GstSeekType start_type, stop_type;
      gint64 start, stop;
      gboolean flush;

      gst_event_parse_seek (event, &rate, &format, &flags, &start_type, &start,
          &stop_type, &stop);

      gst_event_unref (event);

      if (format != GST_FORMAT_TIME) {
        GST_DEBUG_OBJECT (gme, "seeking is only supported in TIME format");
        break;
      }

      if (start_type != GST_SEEK_TYPE_SET || stop_type != GST_SEEK_TYPE_NONE) {
        GST_DEBUG_OBJECT (gme, "unsupported seek type");
        break;
      }

      if (stop_type == GST_SEEK_TYPE_NONE)
        stop = GST_CLOCK_TIME_NONE;

      if (start_type == GST_SEEK_TYPE_SET) {
        GstSegment seg;
        guint64 cur = gme_tell (gme->player) * GST_MSECOND;
        guint64 dest = (guint64) start;

        if (gme->total_duration != GST_CLOCK_TIME_NONE)
          dest = CLAMP (dest, 0, gme->total_duration);
        else
          dest = MAX (0, dest);

        if (dest == cur)
          break;

        flush = (flags & GST_SEEK_FLAG_FLUSH) == GST_SEEK_FLAG_FLUSH;

        if (flush) {
          gst_pad_push_event (gme->srcpad, gst_event_new_flush_start ());
        } else {
          gst_pad_stop_task (gme->srcpad);
        }

        GST_PAD_STREAM_LOCK (gme->srcpad);

        if (flags & GST_SEEK_FLAG_SEGMENT) {
          gst_element_post_message (GST_ELEMENT (gme),
              gst_message_new_segment_start (GST_OBJECT (gme), format, cur));
        }

        if (flush) {
          gst_pad_push_event (gme->srcpad, gst_event_new_flush_stop (TRUE));
        }

        if (stop == GST_CLOCK_TIME_NONE
            && gme->total_duration != GST_CLOCK_TIME_NONE)
          stop = gme->total_duration;

        gst_segment_init (&seg, GST_FORMAT_TIME);
        seg.rate = rate;
        seg.start = dest;
        seg.stop = stop;
        seg.time = dest;
        gst_pad_push_event (gme->srcpad, gst_event_new_segment (&seg));

        gme->seekpoint = dest / GST_MSECOND;    /* nsecs to msecs */
        gme->seeking = TRUE;

        gst_pad_start_task (gme->srcpad, (GstTaskFunction) gst_gme_play,
            gme->srcpad, NULL);

        GST_PAD_STREAM_UNLOCK (gme->srcpad);
        result = TRUE;
      }
      break;
    }
    default:
      result = gst_pad_push_event (gme->sinkpad, event);
      break;
  }

  return result;
}
开发者ID:GStreamer,项目名称:gst-plugins-bad,代码行数:95,代码来源:gstgme.c


示例12: gst_two_lame_sink_event

static gboolean
gst_two_lame_sink_event (GstPad * pad, GstEvent * event)
{
  gboolean ret;
  GstTwoLame *twolame;

  twolame = GST_TWO_LAME (gst_pad_get_parent (pad));

  switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_EOS:{
      GST_DEBUG_OBJECT (twolame, "handling EOS event");

      if (twolame->glopts != NULL) {
        GstBuffer *buf;
        gint size;

        buf = gst_buffer_new_and_alloc (16384);
        size =
            twolame_encode_flush (twolame->glopts, GST_BUFFER_DATA (buf),
            16394);

        if (size > 0 && twolame->last_flow == GST_FLOW_OK) {
          gint64 duration;

          duration = gst_util_uint64_scale (size, 8 * GST_SECOND,
              1000 * twolame->bitrate);

          if (twolame->last_ts == GST_CLOCK_TIME_NONE) {
            twolame->last_ts = twolame->eos_ts;
            twolame->last_duration = duration;
          } else {
            twolame->last_duration += duration;
          }

          GST_BUFFER_TIMESTAMP (buf) = twolame->last_ts;
          GST_BUFFER_DURATION (buf) = twolame->last_duration;
          twolame->last_ts = GST_CLOCK_TIME_NONE;
          GST_BUFFER_SIZE (buf) = size;
          GST_DEBUG_OBJECT (twolame, "pushing final packet of %u bytes", size);
          gst_buffer_set_caps (buf, GST_PAD_CAPS (twolame->srcpad));
          gst_pad_push (twolame->srcpad, buf);
        } else {
          GST_DEBUG_OBJECT (twolame, "no final packet (size=%d, last_flow=%s)",
              size, gst_flow_get_name (twolame->last_flow));
          gst_buffer_unref (buf);
        }
      }

      ret = gst_pad_event_default (pad, event);
      break;
    }
    case GST_EVENT_FLUSH_START:
      GST_DEBUG_OBJECT (twolame, "handling FLUSH start event");
      /* forward event */
      ret = gst_pad_push_event (twolame->srcpad, event);
      break;
    case GST_EVENT_FLUSH_STOP:
    {
      guchar *mp3_data = NULL;
      gint mp3_buffer_size, mp3_size = 0;

      GST_DEBUG_OBJECT (twolame, "handling FLUSH stop event");

      /* clear buffers */
      mp3_buffer_size = 16384;
      mp3_data = g_malloc (mp3_buffer_size);
      mp3_size =
          twolame_encode_flush (twolame->glopts, mp3_data, mp3_buffer_size);

      ret = gst_pad_push_event (twolame->srcpad, event);

      g_free (mp3_data);
      break;
    }
    default:
      ret = gst_pad_event_default (pad, event);
      break;
  }
  gst_object_unref (twolame);

  return ret;
}
开发者ID:prajnashi,项目名称:gst-plugins-bad,代码行数:82,代码来源:gsttwolame.c


示例13: gst_identity_sink_event

static gboolean
gst_identity_sink_event (GstBaseTransform * trans, GstEvent * event)
{
  GstIdentity *identity;
  gboolean ret = TRUE;

  identity = GST_IDENTITY (trans);

  if (!identity->silent) {
    const GstStructure *s;
    const gchar *tstr;
    gchar *sstr;

    GST_OBJECT_LOCK (identity);
    g_free (identity->last_message);

    tstr = gst_event_type_get_name (GST_EVENT_TYPE (event));
    if ((s = gst_event_get_structure (event)))
      sstr = gst_structure_to_string (s);
    else
      sstr = g_strdup ("");

    identity->last_message =
        g_strdup_printf ("event   ******* (%s:%s) E (type: %s (%d), %s) %p",
        GST_DEBUG_PAD_NAME (trans->sinkpad), tstr, GST_EVENT_TYPE (event),
        sstr, event);
    g_free (sstr);
    GST_OBJECT_UNLOCK (identity);

    gst_identity_notify_last_message (identity);
  }

  if (identity->single_segment && (GST_EVENT_TYPE (event) == GST_EVENT_SEGMENT)) {
    if (!trans->have_segment) {
      GstEvent *news;
      GstSegment segment;

      gst_event_copy_segment (event, &segment);
      gst_event_copy_segment (event, &trans->segment);
      trans->have_segment = TRUE;

      /* This is the first segment, send out a (0, -1) segment */
      gst_segment_init (&segment, segment.format);
      news = gst_event_new_segment (&segment);

      gst_pad_event_default (trans->sinkpad, GST_OBJECT_CAST (trans), news);
    } else {
      /* need to track segment for proper running time */
      gst_event_copy_segment (event, &trans->segment);
    }
  }

  if (GST_EVENT_TYPE (event) == GST_EVENT_GAP &&
      trans->have_segment && trans->segment.format == GST_FORMAT_TIME) {
    GstClockTime start, dur;

    gst_event_parse_gap (event, &start, &dur);
    if (GST_CLOCK_TIME_IS_VALID (start)) {
      start = gst_segment_to_running_time (&trans->segment,
          GST_FORMAT_TIME, start);

      gst_identity_do_sync (identity, start);

      /* also transform GAP timestamp similar to buffer timestamps */
      if (identity->single_segment) {
        gst_event_unref (event);
        event = gst_event_new_gap (start, dur);
      }
    }
  }

  /* Reset previous timestamp, duration and offsets on SEGMENT
   * to prevent false warnings when checking for perfect streams */
  if (GST_EVENT_TYPE (event) == GST_EVENT_SEGMENT) {
    identity->prev_timestamp = identity->prev_duration = GST_CLOCK_TIME_NONE;
    identity->prev_offset = identity->prev_offset_end = GST_BUFFER_OFFSET_NONE;
  }

  if (identity->single_segment && GST_EVENT_TYPE (event) == GST_EVENT_SEGMENT) {
    /* eat up segments */
    gst_event_unref (event);
    ret = TRUE;
  } else {
    if (GST_EVENT_TYPE (event) == GST_EVENT_FLUSH_START) {
      GST_OBJECT_LOCK (identity);
      if (identity->clock_id) {
        GST_DEBUG_OBJECT (identity, "unlock clock wait");
        gst_clock_id_unschedule (identity->clock_id);
        gst_clock_id_unref (identity->clock_id);
        identity->clock_id = NULL;
      }
      GST_OBJECT_UNLOCK (identity);
    }

    ret = GST_BASE_TRANSFORM_CLASS (parent_class)->sink_event (trans, event);
  }

  return ret;
}
开发者ID:mparis,项目名称:gstreamer,代码行数:99,代码来源:gstidentity.c


示例14: gst_vdp_mpeg_dec_sink_event

static gboolean
gst_vdp_mpeg_dec_sink_event (GstPad * pad, GstEvent * event)
{
    GstVdpMpegDec *mpeg_dec = GST_VDP_MPEG_DEC (gst_pad_get_parent (pad));
    gboolean res;

    switch (GST_EVENT_TYPE (event)) {
    case GST_EVENT_FLUSH_STOP:
    {
        GST_DEBUG_OBJECT (mpeg_dec, "flush stop");

        gst_vdp_mpeg_dec_flush (mpeg_dec);
        res = gst_pad_push_event (mpeg_dec->src, event);

        break;
    }
    case GST_EVENT_NEWSEGMENT:
    {
        gboolean update;
        gdouble rate;
        GstFormat format;
        gint64 start;
        gint64 stop;
        gint64 position;

        gst_event_parse_new_segment (event, &update, &rate, &format,
                                     &start, &stop, &position);

        if (format != GST_FORMAT_TIME) {
            if (!gst_vdp_mpeg_dec_convert (mpeg_dec, format, start,
                                           GST_FORMAT_TIME, &start))
                goto convert_error;
            if (!gst_vdp_mpeg_dec_convert (mpeg_dec, format, stop,
                                           GST_FORMAT_TIME, &stop))
                goto convert_error;
            if (!gst_vdp_mpeg_dec_convert (mpeg_dec, format, position,
                                           GST_FORMAT_TIME, &position))
                goto convert_error;

            gst_event_unref (event);
            event = gst_event_new_new_segment (update, rate, GST_FORMAT_TIME, start,
                                               stop, position);
        }

        g_mutex_lock (mpeg_dec->mutex);
        /* if we seek ourselves we don't push out a newsegment now since we
         * use the calculated timestamp of the first frame for this */
        if (mpeg_dec->seeking) {
            gst_event_unref (event);
            res = TRUE;
            g_mutex_unlock (mpeg_dec->mutex);
            goto done;
        }
        g_mutex_unlock (mpeg_dec->mutex);

        GST_DEBUG_OBJECT (mpeg_dec,
                          "Pushing new segment update %d format %d start %"
                          GST_TIME_FORMAT " stop %" GST_TIME_FORMAT " position %"
                          GST_TIME_FORMAT, update, format, GST_TIME_ARGS (start),
                          GST_TIME_ARGS (stop), GST_TIME_ARGS (position));
convert_error:
        res = gst_pad_push_event (mpeg_dec->src, event);

        break;
    }
    default:
        res = gst_pad_event_default (pad, event);
    }

done:
    gst_object_unref (mpeg_dec);

    return res;
}
开发者ID:zsx,项目名称:ossbuild,代码行数:74,代码来源:gstvdpmpegdec.c


示例15: xing_mp3_encoder_chain

static GstFlowReturn
xing_mp3_encoder_chain(GstPad *pad, GstBuffer *buf)
{
    XingMp3Encoder *encoder;
    GstFlowReturn ret = GST_FLOW_OK;
  
    g_return_val_if_fail(pad != NULL, GST_FLOW_ERROR);
    g_return_val_if_fail(GST_IS_PAD(pad), GST_FLOW_ERROR);
    g_return_val_if_fail(buf != NULL, GST_FLOW_ERROR);

    encoder = XING_MP3_ENCODER(gst_pad_get_parent(pad));

    if(GST_IS_EVENT(buf)) {
        GstEvent *event = GST_EVENT(buf);

        switch(GST_EVENT_TYPE(event)) {
            case GST_EVENT_EOS:
                encoder->at_end_of_stream = TRUE;
                gst_event_unref(event);
                break;

            default:
                gst_pad_event_default(pad, event);
                return ret;
        }
    } else {
        guchar *data;
        gulong size;
        gulong i, j;
        float **buffer;
        gint buf_size;
        gint buf_pos;

        if(!encoder->is_initialized) {
            gst_buffer_unref(buf);
            GST_ELEMENT_ERROR(encoder, CORE, NEGOTIATION, (NULL), ("Encoder not initialized"));
            return GST_FLOW_UNEXPECTED;
        }

        if(!encoder->header_sent) {
            E_CONTROL control;
            MPEG_HEAD head;
            guchar output_buffer[OUTPUT_BUFFER_SIZE];
            gint buf_len;

            if(!encoder->use_cbr) {
                GstFlowReturn push_ret;
                
                hx_mp3enc_l3_info_ec(encoder->xing_encoder, &control);
                hx_mp3enc_l3_info_head(encoder->xing_encoder, &head);

                buf_len = XingHeader(control.samprate, head.mode, control.cr_bit, control.original,
                    VBR_SCALE_FLAG /* FRAMES_FLAG | BYTES_FLAG | TOC_FLAG */, 0, 0,
                    control.vbr_flag ? control.vbr_mnr : -1, NULL,
                    output_buffer, 0, 0, 0);
            
                if((push_ret = xing_mp3_encoder_push_buffer(encoder, output_buffer,
                    buf_len)) != GST_FLOW_OK) {
                    gst_buffer_unref(buf);
                    return push_ret;
                }
            }
            
            encoder->header_sent = TRUE;
        }

        data = (guchar *)GST_BUFFER_DATA(buf);
        buf_size = GST_BUFFER_SIZE(buf);
        buf_pos = 0;

        /* Transfer incoming data to internal buffer.
         * TODO: Use a ring buffer, avoid memmove () */

        while(buf_pos < buf_size) {
            gint gulp = MIN(buf_size - buf_pos, INPUT_BUFFER_SIZE - encoder->input_buffer_pos);

            memcpy(encoder->input_buffer + encoder->input_buffer_pos, data + buf_pos, gulp);

            encoder->samples_in += gulp / (2 * encoder->channels);
            encoder->input_buffer_pos += gulp;
            buf_pos += gulp;

            /* Pass data on to encoder */
            while(encoder->input_buffer_pos >= encoder->bytes_per_frame) {
                guchar output_buffer[OUTPUT_BUFFER_SIZE];
                IN_OUT x;

                x = hx_mp3enc_mp3_encode_frame(encoder->xing_encoder, 
                    encoder->input_buffer, output_buffer);

                if(x.in_bytes == 0 && x.out_bytes == 0) {
                    break;
                }

                memmove(encoder->input_buffer, encoder->input_buffer + x.in_bytes,
                    encoder->input_buffer_pos - x.in_bytes);
                encoder->input_buffer_pos -= x.in_bytes;

                /* Accept output from encoder and pass it on.
                 * TODO: Do this less often and save CPU */
//.........这里部分代码省略.........
开发者ID:ivanz,项目名称:banshee-unofficial-plugins,代码行数:101,代码来源:gst-xing-encoder-0.10.c


示例16: gst_identity_event

static gboolean
gst_identity_event (GstBaseTransform * trans, GstEvent * event)
{
  GstIdentity *identity;
  gboolean ret = TRUE;

  identity = GST_IDENTITY (trans);

  if (!identity->silent) {
    const GstStructure *s;
    gchar *sstr;

    GST_OBJECT_LOCK (identity);
    g_free (identity->last_message);

    if ((s = gst_event_get_structure (event)))
      sstr = gst_structure_to_string (s);
    else
      sstr = g_strdup ("");

    identity->l 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ GST_EVENT_TYPE_NAME函数代码示例发布时间:2022-05-30
下一篇:
C++ GST_ERROR_OBJECT函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap