C++ GPIO_VREG函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GPIO_VREG函数的典型用法代码示例。如果您正苦于以下问题：C++ GPIO_VREG函数的具体用法？C++ GPIO_VREG怎么用？C++ GPIO_VREG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GPIO_VREG函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_L2, "ext_l2", "ext_l2_en", 91, NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		PM8921_GPIO_PM_TO_SYS(17), NULL),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en",
		PM8921_GPIO_PM_TO_SYS(42), "8921_usb_otg"),
};

/* SAW regulator constraints */
struct regulator_init_data msm_saw_regulator_pdata_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm_saw_regulator_pdata_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

/* PM8921 regulator constraints */

开发者ID:DrewC4，项目名称:Optimus-F7-fx1s，代码行数:31，代码来源:board-vu2-regulator.c

示例2: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",
						 SX150X_GPIO(4, 14), NULL),
	GPIO_VREG(AVC_5V, "avc_5v", "avc_5v_en", SX150X_GPIO(4, 3), NULL),

开发者ID:18712886438，项目名称:NewWorld-F160-JB-Kernel，代码行数:31，代码来源:board-8064-regulator.c

示例3: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
impression_j_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	//GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
	//	  impression_j_EXT_3P3V_REG_EN_GPIO, NULL),
	//GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
	//	  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

/* SAW regulator constraints */
struct regulator_init_data impression_j_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data impression_j_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

开发者ID:BackupWildfireDEV，项目名称:ElementalX-Sense-5.0.2，代码行数:30，代码来源:board-impression_j-regulator.c

示例4: ARRAY_SIZE

				.valid_ops_mask	= REGULATOR_CHANGE_STATUS, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id), \
			.consumer_supplies	= vreg_consumers_##_id, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.regulator_name = _reg_name, \
		.gpio_label	= _gpio_label, \
		.gpio		= _gpio, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm7x27a_evb_gpio_regulator_pdata[] = {
	/*        ID			vreg_name		gpio_label		gpio	supply */
	GPIO_VREG(EXT_2V8,		"ext_2v8",		"ext_2v8_en",	35,		NULL),
	GPIO_VREG(EXT_1V8,		"ext_1v8",		"ext_1v8_en",	40,		NULL),
};

struct gpio_regulator_platform_data msm7x27a_sku3_gpio_regulator_pdata[] = {
	/*        ID			vreg_name		gpio_label		gpio	supply */
	GPIO_VREG(EXT_2V8,		"ext_2v8",		"ext_2v8_en",	35,		NULL),
	GPIO_VREG(EXT_1V8,		"ext_1v8",		"ext_1v8_en",	34,		NULL),
};

struct gpio_regulator_platform_data msm7x27a_sku7_gpio_regulator_pdata[] = {
	/*        ID			vreg_name		gpio_label		gpio	supply */
	GPIO_VREG(EXT_2V8,		"ext_2v8",		"ext_2v8_en",	35,		NULL),
	GPIO_VREG(EXT_1V8,		"ext_1v8",		"ext_1v8_en",	58,		NULL),
};

开发者ID:deafnote，项目名称:kernel_cross_a28，代码行数:30，代码来源:board-msm7x27a-regulator.c

示例5: GPIO_VREG

	//ASUS_BSP+++ BennyCheng "remove unused mpp/gpio pins"
	/*
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
	*/
	//ASUS_BSP--- BennyCheng "remove unused mpp/gpio pins"
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",
						 SX150X_GPIO(4, 14), NULL),
	GPIO_VREG(AVC_5V, "avc_5v", "avc_5v_en", SX150X_GPIO(4, 3), NULL),
	GPIO_VREG(AVC_3P3V, "avc_3p3v", "avc_3p3v_en",
					SX150X_GPIO(4, 15), "avc_5v"),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

开发者ID:gcloudspider，项目名称:android_kernel_asus_A68，代码行数:30，代码来源:board-8064-regulator.c

示例6: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
	GPIO_VREG(BT_WIFI, "bt_wifi_en", "gpio_8_vreg", ATH_CHIP_PWD_L,
			NULL),
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",

开发者ID:androidrbox，项目名称:android_kernel_amazon_bueller，代码行数:31，代码来源:board-8064-regulator.c

示例7: ARRAY_SIZE

	{ \
		.constraints = { \
			.name		= _name, \
			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE, \
			.min_uV		= _min_uV, \
			.max_uV		= _max_uV, \
		}, \
		.num_consumer_supplies	= ARRAY_SIZE(vreg_consumers_##_id), \
		.consumer_supplies	= vreg_consumers_##_id, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
msm8930_gpio_regulator_pdata[] __devinitdata = {
	/*        ID          vreg_name     gpio_label     gpio  supply */
	GPIO_VREG(EXT_5V,     "ext_5v",     "ext_5v_en",     63, NULL),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en", 97, "ext_5v"),
};

/* SAW regulator constraints */
struct regulator_init_data msm8930_saw_regulator_core0_pdata =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8038_s5",	       400000, 1400000);
struct regulator_init_data msm8930_saw_regulator_core1_pdata =
	SAW_VREG_INIT(S6, "8038_s6",	       400000, 1400000);

/* PM8038 regulator constraints */
struct pm8xxx_regulator_platform_data
msm8930_pm8038_regulator_pdata[] __devinitdata = {
	/*
	 *	    ID  name always_on pd min_uV   max_uV   en_t supply

开发者ID:JmzTaylor，项目名称:android_kernel_htc_totemc2，代码行数:31，代码来源:board-tc2-regulator.c

示例8: GPIO_VREG

			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
/*	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),*/
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",
						 SX150X_GPIO(4, 14), NULL),
	GPIO_VREG(AVC_5V, "avc_5v", "avc_5v_en", SX150X_GPIO(4, 3), NULL),
	GPIO_VREG(AVC_3P3V, "avc_3p3v", "avc_3p3v_en",
					SX150X_GPIO(4, 15), "avc_5v"),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =

开发者ID:LeetCodes，项目名称:flo-ElementalX，代码行数:32，代码来源:board-flo-regulator.c

示例9: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*	ID	vreg_name gpio_label	gpio		supply */
	GPIO_VREG(EXT_DSV_LOAD, "ext_dsv_load", "ext_dsv_load_en", APQ8064_EXT_DSV_LOAD_EN_GPIO, NULL),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       600000, 1450000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       600000, 1450000);

struct regulator_init_data msm8064_saw_regulator_pdata_8821_s0 =
	/*	      ID       vreg_name	min_uV  max_uV */
	SAW_VREG_INIT(8821_S0, "8821_s0",       600000, 1450000);
struct regulator_init_data msm8064_saw_regulator_pdata_8821_s1 =
	SAW_VREG_INIT(8821_S1, "8821_s1",       600000, 1450000);

开发者ID:Loller79，项目名称:Solid_Kernel-GEEHRC-Bricked，代码行数:30，代码来源:board-mako-regulator.c

示例10: GPIO_VREG

			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints.
 * Must be in sync with corresponding platform_device structures in
 * board_sony_fusion3.c
 */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio  supply active_low*/
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7),
		NULL, 0),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en",
		PM8921_GPIO_PM_TO_SYS(42), NULL, 1),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

struct regulator_init_data msm8064_saw_regulator_pdata_8821_s0 =
	/*	      ID       vreg_name	min_uV  max_uV */
	SAW_VREG_INIT(8821_S0, "8821_s0",       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8821_s1 =

开发者ID:AOKP，项目名称:kernel_sony_apq8064，代码行数:32，代码来源:board-sony_dogo-regulator.c

示例11: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
};

/* SAW regulator constraints */
struct regulator_init_data msm_saw_regulator_pdata_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm_saw_regulator_pdata_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

/* PM8921 regulator constraints */
struct pm8xxx_regulator_platform_data
msm_pm8921_regulator_pdata[] __devinitdata = {
	/*
	 *		ID   name always_on pd min_uV   max_uV   en_t supply
	 *	system_uA reg_ID

开发者ID:NoelMacwan，项目名称:SXDHuashan，代码行数:31，代码来源:board-viskan_huashan-regulator.c

示例12: GPIO_VREG

			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints.
 * Must be in sync with corresponding platform_device structures in
 * board_sony_fusion3.c
 */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio  supply active_low*/
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7),
		NULL, 0),
	GPIO_VREG(EXT_SD_PWR, "ext_sd_pwr", "ext_sd_pwr_en",
		PM8921_MPP_PM_TO_SYS(4), "8921_l6", 0),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en",
		PM8921_GPIO_PM_TO_SYS(42), NULL, 1),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

struct regulator_init_data msm8064_saw_regulator_pdata_8821_s0 =
	/*	      ID       vreg_name	min_uV  max_uV */

开发者ID:EnJens，项目名称:android_kernel_sony_pollux_windy_stock，代码行数:32，代码来源:board-sony_odin-regulator.c

示例13: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

struct gpio_regulator_platform_data
monarudo_gpio_regulator_pdata[] __devinitdata = {
	
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en",
			PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
			monarudo_EXT_3P3V_REG_EN_GPIO, NULL),
	
	
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

struct regulator_init_data monarudo_saw_regulator_pdata_8921_s5 =
	
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data monarudo_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

struct regulator_init_data monarudo_saw_regulator_pdata_8821_s0 =

开发者ID:Red680812，项目名称:DNA_kitkat，代码行数:32，代码来源:board-monarudo-regulator.c

示例14: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_L2, "ext_l2", "ext_l2_en", 91, NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		PM8921_GPIO_PM_TO_SYS(17), NULL),
};

/* SAW regulator constraints */
struct regulator_init_data msm_saw_regulator_pdata_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       700000, 1300000);
struct regulator_init_data msm_saw_regulator_pdata_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       700000, 1300000);

/* PM8921 regulator constraints */
struct pm8xxx_regulator_platform_data
msm_pm8921_regulator_pdata[] __devinitdata = {

开发者ID:Shr3ps，项目名称:kernel_s500_cm10，代码行数:31，代码来源:board-acer-8960-regulator.c

注：本文中的GPIO_VREG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GPIO_Write函数代码示例发布时间：2022-05-30

C++ GPIO_ToggleBits函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19187|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9655|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8623|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8654|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GPIO_VREG函数代码示例

示例1: ARRAY_SIZE

示例2: ARRAY_SIZE

示例3: ARRAY_SIZE

示例4: ARRAY_SIZE

示例5: GPIO_VREG

示例6: ARRAY_SIZE

示例7: ARRAY_SIZE

示例8: GPIO_VREG

示例9: ARRAY_SIZE

示例10: GPIO_VREG

示例11: ARRAY_SIZE

示例12: GPIO_VREG

示例13: ARRAY_SIZE

示例14: ARRAY_SIZE

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-32032

mikepj/XRG: System monitor for macOS.

opencv/opencv: Open Source Computer Visi

qf-devops/maven-spring

slidenerd/Material-Design-Test-App-DEPRE

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053