• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ GNUNET_strdup函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GNUNET_strdup函数的典型用法代码示例。如果您正苦于以下问题:C++ GNUNET_strdup函数的具体用法?C++ GNUNET_strdup怎么用?C++ GNUNET_strdup使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GNUNET_strdup函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GNUNET_TESTBED_test_run

/**
 * Convenience method for running a "simple" test on the local system
 * with a single call from 'main'.  Underlay and overlay topology are
 * configured using the "UNDERLAY" and "OVERLAY" options in the
 * "[testbed]" section of the configuration (with possible options
 * given in "UNDERLAY_XXX" and/or "OVERLAY_XXX").
 *
 * The test is to be terminated using a call to
 * "GNUNET_SCHEDULER_shutdown".  If starting the test fails,
 * the program is stopped without 'master' ever being run.
 *
 * NOTE: this function should be called from 'main', NOT from
 * within a GNUNET_SCHEDULER-loop.  This function will initialze
 * the scheduler loop, the testbed and then pass control to
 * 'master'.
 *
 * @param testname name of the testcase (to configure logging, etc.)
 * @param cfg_filename configuration filename to use
 *              (for testbed, controller and peers)
 * @param num_peers number of peers to start
 * @param event_mask bit mask with set of events to call 'cc' for;
 *                   or-ed values of "1LL" shifted by the
 *                   respective 'enum GNUNET_TESTBED_EventType'
 *                   (i.e.  "(1LL << GNUNET_TESTBED_ET_CONNECT) || ...")
 * @param cc controller callback to invoke on events; This callback is called
 *        for all peer start events even if GNUNET_TESTBED_ET_PEER_START isn't
 *        set in the event_mask as this is the only way get access to the
 *        handle of each peer
 * @param cc_cls closure for cc
 * @param test_master task to run once the test is ready
 * @param test_master_cls closure for 'task'.
 * @return GNUNET_SYSERR on error, GNUNET_OK on success
 */
int
GNUNET_TESTBED_test_run (const char *testname, const char *cfg_filename,
                         unsigned int num_peers, uint64_t event_mask,
                         GNUNET_TESTBED_ControllerCallback cc, void *cc_cls,
                         GNUNET_TESTBED_TestMaster test_master,
                         void *test_master_cls)
{
  char *argv2[] = {
    NULL,
    "-c",
    NULL,
    NULL
  };
  struct GNUNET_GETOPT_CommandLineOption options[] = {
    GNUNET_GETOPT_OPTION_END
  };
  struct TestRunContext *rc;
  int ret;

  argv2[0] = GNUNET_strdup (testname);
  argv2[2] = GNUNET_strdup (cfg_filename);
  GNUNET_assert (NULL != test_master);
  GNUNET_assert (num_peers > 0);
  rc = GNUNET_malloc (sizeof (struct TestRunContext) +
                      (num_peers * sizeof (struct GNUNET_TESTBED_Peer *)));
  rc->test_master = test_master;
  rc->test_master_cls = test_master_cls;
  rc->num_peers = num_peers;
  rc->event_mask = event_mask;
  rc->cc = cc;
  rc->cc_cls = cc_cls;
  ret =
      GNUNET_PROGRAM_run ((sizeof (argv2) / sizeof (char *)) - 1, argv2,
                          testname, "nohelp", options, &run, rc);
  GNUNET_free (rc);
  GNUNET_free (argv2[0]);
  GNUNET_free (argv2[2]);
  return ret;
}
开发者ID:tg-x,项目名称:gnunet,代码行数:72,代码来源:testbed_api_test.c


示例2: testing_connect_cb

static void
testing_connect_cb (struct PeerContext *p1, struct PeerContext *p2, void *cls)
{
  cc = NULL;
  char *p1_c = GNUNET_strdup (GNUNET_i2s (&p1->id));

  GNUNET_log (GNUNET_ERROR_TYPE_DEBUG, "Peers connected: %u (%s) <-> %u (%s)\n",
              p1->no, p1_c, p2->no, GNUNET_i2s (&p2->id));
  GNUNET_free (p1_c);

  s_connected = GNUNET_YES;
  send_task = GNUNET_SCHEDULER_add_now (&sendtask, NULL);
}
开发者ID:amatus,项目名称:gnunet-debian,代码行数:13,代码来源:test_transport_api_manipulation_send_tcp.c


示例3: testing_connect_cb

static void
testing_connect_cb (struct PeerContext *p1, 
		    struct PeerContext *p2, 
		    void *cls)
{
  char *ps = GNUNET_strdup (GNUNET_i2s (&p1->id));

  GNUNET_log (GNUNET_ERROR_TYPE_DEBUG,
              "Peer %u (`%4s') connected to peer %u (`%s')!\n", p1->no, ps,
              p2->no, GNUNET_i2s (&p2->id));
  GNUNET_free (ps);
  GNUNET_SCHEDULER_add_now (&end, NULL);
}
开发者ID:muggenhor,项目名称:GNUnet,代码行数:13,代码来源:test_transport_testing.c


示例4: GNUNET_NAMESTORE_zone_to_name

/**
 * Look for an existing PKEY delegation record for a given public key.
 * Returns at most one result to the processor.
 *
 * @param h handle to the namestore
 * @param zone hash of public key of the zone to look up in, never NULL
 * @param value_zone hash of the public key of the target zone (value), never NULL
 * @param proc function to call on the matching records, or with
 *        NULL (rd_count == 0) if there are no matching records
 * @param proc_cls closure for proc
 * @return a handle that can be used to
 *         cancel
 */
struct GNUNET_NAMESTORE_QueueEntry *
GNUNET_NAMESTORE_zone_to_name (struct GNUNET_NAMESTORE_Handle *h,
                               const struct GNUNET_CRYPTO_ShortHashCode *zone,
                               const struct GNUNET_CRYPTO_ShortHashCode *value_zone,
                               GNUNET_NAMESTORE_RecordProcessor proc, void *proc_cls)
{
  struct GNUNET_NAMESTORE_QueueEntry *qe;
  struct PendingMessage *pe;
  size_t msg_size = 0;
  uint32_t rid = 0;

  GNUNET_assert (NULL != h);
  GNUNET_assert (NULL != zone);
  GNUNET_assert (NULL != value_zone);

  rid = get_op_id(h);
  qe = GNUNET_malloc(sizeof (struct GNUNET_NAMESTORE_QueueEntry));
  qe->nsh = h;
  qe->proc = proc;
  qe->proc_cls = proc_cls;
  qe->op_id = rid;
  GNUNET_CONTAINER_DLL_insert_tail(h->op_head, h->op_tail, qe);

  /* set msg_size*/
  msg_size = sizeof (struct ZoneToNameMessage);
  pe = GNUNET_malloc(sizeof (struct PendingMessage) + msg_size);

  /* create msg here */
  struct ZoneToNameMessage * msg;
  pe->size = msg_size;
  pe->is_init = GNUNET_NO;
  msg = (struct ZoneToNameMessage *) &pe[1];
  msg->gns_header.header.type = htons (GNUNET_MESSAGE_TYPE_NAMESTORE_ZONE_TO_NAME);
  msg->gns_header.header.size = htons (msg_size);
  msg->gns_header.r_id = htonl (rid);
  msg->zone = *zone;
  msg->value_zone = *value_zone;

  char * z_tmp = GNUNET_strdup (GNUNET_short_h2s (zone));
  GNUNET_log (GNUNET_ERROR_TYPE_DEBUG, "Sending `%s' message for zone `%s' in zone `%s'\n",
      "NAMESTORE_ZONE_TO_NAME",
      z_tmp,
      GNUNET_short_h2s (value_zone));
  GNUNET_free (z_tmp);

  /* transmit message */
  GNUNET_CONTAINER_DLL_insert_tail (h->pending_head, h->pending_tail, pe);
  do_transmit(h);

  return qe;
}
开发者ID:h4ck3rm1k3,项目名称:gnunet-debian,代码行数:64,代码来源:namestore_api.c


示例5: key_iterator

void
key_iterator (void *cls, const struct GNUNET_HashCode *key, const char *proof,
              int accepting, unsigned int num_edges,
              const struct GNUNET_REGEX_Edge *edges)
{
  unsigned int i;
  struct IteratorContext *ctx = cls;
  char *out_str;
  char *state_id = GNUNET_strdup (GNUNET_h2s (key));

  if (GNUNET_YES == ctx->should_save_graph)
  {
    if (GNUNET_YES == accepting)
      GNUNET_asprintf (&out_str, "\"%s\" [shape=doublecircle]\n", state_id);
    else
      GNUNET_asprintf (&out_str, "\"%s\" [shape=circle]\n", state_id);
    fwrite (out_str, strlen (out_str), 1, ctx->graph_filep);
    GNUNET_free (out_str);

    for (i = 0; i < num_edges; i++)
    {
      transition_counter++;
      GNUNET_asprintf (&out_str, "\"%s\" -> \"%s\" [label = \"%s (%s)\"]\n",
                       state_id, GNUNET_h2s (&edges[i].destination),
                       edges[i].label, proof);
      fwrite (out_str, strlen (out_str), 1, ctx->graph_filep);

      GNUNET_free (out_str);
    }
  }
  else
  {
    for (i = 0; i < num_edges; i++)
      transition_counter++;
  }

  for (i = 0; i < ctx->string_count; i++)
  {
    if (0 == strcmp (proof, ctx->strings[i]))
      ctx->match_count++;
  }

  if (GNUNET_OK != GNUNET_REGEX_check_proof (proof, key))
  {
    ctx->error++;
    GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
                "Proof check failed: proof: %s key: %s\n", proof, state_id);
  }

  GNUNET_free (state_id);
}
开发者ID:schanzen,项目名称:gnunet-mirror,代码行数:51,代码来源:test_regex_iterate_api.c


示例6: write_pid_file

/**
 * Write PID file.
 *
 * @param sctx service context
 * @param pid PID to write (should be equal to 'getpid()'
 * @return  #GNUNET_OK on success (including no work to be done)
 */
static int
write_pid_file (struct GNUNET_SERVICE_Context *sctx, pid_t pid)
{
  FILE *pidfd;
  char *pif;
  char *user;
  char *rdir;
  int len;

  if (NULL == (pif = get_pid_file_name (sctx)))
    return GNUNET_OK;           /* no file desired */
  user = get_user_name (sctx);
  rdir = GNUNET_strdup (pif);
  len = strlen (rdir);
  while ((len > 0) && (rdir[len] != DIR_SEPARATOR))
    len--;
  rdir[len] = '\0';
  if (0 != ACCESS (rdir, F_OK))
  {
    /* we get to create a directory -- and claim it
     * as ours! */
    (void) GNUNET_DISK_directory_create (rdir);
    if ((NULL != user) && (0 < strlen (user)))
      GNUNET_DISK_file_change_owner (rdir, user);
  }
  if (0 != ACCESS (rdir, W_OK | X_OK))
  {
    LOG_STRERROR_FILE (GNUNET_ERROR_TYPE_ERROR, "access", rdir);
    GNUNET_free (rdir);
    GNUNET_free_non_null (user);
    GNUNET_free (pif);
    return GNUNET_SYSERR;
  }
  GNUNET_free (rdir);
  pidfd = FOPEN (pif, "w");
  if (NULL == pidfd)
  {
    LOG_STRERROR_FILE (GNUNET_ERROR_TYPE_ERROR, "fopen", pif);
    GNUNET_free (pif);
    GNUNET_free_non_null (user);
    return GNUNET_SYSERR;
  }
  if (0 > FPRINTF (pidfd, "%u", pid))
    LOG_STRERROR_FILE (GNUNET_ERROR_TYPE_WARNING, "fprintf", pif);
  GNUNET_break (0 == FCLOSE (pidfd));
  if ((NULL != user) && (0 < strlen (user)))
    GNUNET_DISK_file_change_owner (pif, user);
  GNUNET_free_non_null (user);
  GNUNET_free (pif);
  return GNUNET_OK;
}
开发者ID:tg-x,项目名称:gnunet,代码行数:58,代码来源:service.c


示例7: notify_disconnect

static void
notify_disconnect (void *cls, const struct GNUNET_PeerIdentity *peer)
{
  struct PeerContext *p = cls;
  char *ps = GNUNET_strdup (GNUNET_i2s (&p->id));

  GNUNET_log (GNUNET_ERROR_TYPE_DEBUG,
              "Peer %u (`%4s'): peer (`%s') disconnected from me!\n", p->no, ps,
              GNUNET_i2s (peer));

  if (th != NULL)
    GNUNET_TRANSPORT_notify_transmit_ready_cancel (th);
  th = NULL;
}
开发者ID:amatus,项目名称:gnunet-debian,代码行数:14,代码来源:test_transport_api_bidirectional_connect.c


示例8: testCanonicalize

static int
testCanonicalize ()
{
  char *fn = GNUNET_strdup ("ab?><|cd*ef:/g\"");

  GNUNET_DISK_filename_canonicalize (fn);
  if (0 != strcmp (fn, "ab____cd_ef__g_"))
  {
    GNUNET_free (fn);
    return 1;
  }
  GNUNET_free (fn);
  return 0;
}
开发者ID:GNUnet,项目名称:gnunet,代码行数:14,代码来源:test_disk.c


示例9: unindex_reader

/**
 * Function called by the tree encoder to obtain
 * a block of plaintext data (for the lowest level
 * of the tree).
 *
 * @param cls our publishing context
 * @param offset identifies which block to get
 * @param max (maximum) number of bytes to get; returning
 *        fewer will also cause errors
 * @param buf where to copy the plaintext buffer
 * @param emsg location to store an error message (on error)
 * @return number of bytes copied to buf, 0 on error
 */
static size_t
unindex_reader (void *cls,
                uint64_t offset,
                size_t max,
                void *buf,
                char **emsg)
{
  struct GNUNET_FS_UnindexContext *uc = cls;
  size_t pt_size;

  pt_size = GNUNET_MIN (max, uc->file_size - offset);
  if (offset != GNUNET_DISK_file_seek (uc->fh, offset, GNUNET_DISK_SEEK_SET))
  {
    *emsg = GNUNET_strdup (_("Failed to find given position in file"));
    return 0;
  }
  if (pt_size != GNUNET_DISK_file_read (uc->fh, buf, pt_size))
  {
    *emsg = GNUNET_strdup (_("Failed to read file"));
    return 0;
  }
  return pt_size;
}
开发者ID:tg-x,项目名称:gnunet,代码行数:36,代码来源:fs_unindex.c


示例10: testing_connect_cb

static void
testing_connect_cb (struct PeerContext *p1, struct PeerContext *p2, void *cls)
{
  cc = NULL;
  char *p1_c = GNUNET_strdup (GNUNET_i2s (&p1->id));

  GNUNET_log (GNUNET_ERROR_TYPE_DEBUG, "Peers connected: %s <-> %s\n", p1_c,
              GNUNET_i2s (&p2->id));
  GNUNET_free (p1_c);

  // FIXME: THIS IS REQUIRED! SEEMS TO BE A BUG!
  send_task =
      GNUNET_SCHEDULER_add_delayed (GNUNET_TIME_UNIT_SECONDS, &sendtask, NULL);
}
开发者ID:amatus,项目名称:gnunet-debian,代码行数:14,代码来源:test_transport_api_limited_sockets.c


示例11: GNUNET_TRANSPORT_TESTING_log_disconnect

/**
 * Log a disconnect event.
 *
 * @param cls NULL
 * @param me peer that had the event
 * @param other peer that disconnected.
 */
void
GNUNET_TRANSPORT_TESTING_log_disconnect (void *cls,
                                         struct GNUNET_TRANSPORT_TESTING_PeerContext *me,
                                         const struct GNUNET_PeerIdentity *other)
{
  char *ps;

  ps = GNUNET_strdup (GNUNET_i2s (&me->id));
  GNUNET_log (GNUNET_ERROR_TYPE_INFO,
              "Peer `%s' disconnected from %u (%s)!\n",
              GNUNET_i2s (other),
              me->no,
              ps);
}
开发者ID:GNUnet,项目名称:gnunet,代码行数:21,代码来源:transport-testing-loggers.c


示例12: GNUNET_PEERSTORE_store

/**
 * Store a new entry in the PEERSTORE.
 * Note that stored entries can be lost in some cases
 * such as power failure.
 *
 * @param h Handle to the PEERSTORE service
 * @param sub_system name of the sub system
 * @param peer Peer Identity
 * @param key entry key
 * @param value entry value BLOB
 * @param size size of @e value
 * @param expiry absolute time after which the entry is (possibly) deleted
 * @param options options specific to the storage operation
 * @param cont Continuation function after the store request is sent
 * @param cont_cls Closure for @a cont
 */
struct GNUNET_PEERSTORE_StoreContext *
GNUNET_PEERSTORE_store (struct GNUNET_PEERSTORE_Handle *h,
                        const char *sub_system,
                        const struct GNUNET_PeerIdentity *peer, const char *key,
                        const void *value, size_t size,
                        struct GNUNET_TIME_Absolute expiry,
                        enum GNUNET_PEERSTORE_StoreOption options,
                        GNUNET_PEERSTORE_Continuation cont, void *cont_cls)
{
  struct GNUNET_MQ_Envelope *ev;
  struct GNUNET_PEERSTORE_StoreContext *sc;

  LOG (GNUNET_ERROR_TYPE_DEBUG,
       "Storing value (size: %lu) for subsytem `%s', peer `%s', key `%s'\n",
       size, sub_system, GNUNET_i2s (peer), key);
  ev = PEERSTORE_create_record_mq_envelope (sub_system, peer, key, value, size,
                                            &expiry, options,
                                            GNUNET_MESSAGE_TYPE_PEERSTORE_STORE);
  sc = GNUNET_new (struct GNUNET_PEERSTORE_StoreContext);

  sc->sub_system = GNUNET_strdup (sub_system);
  sc->peer = *peer;
  sc->key = GNUNET_strdup (key);
  sc->value = GNUNET_memdup (value, size);
  sc->size = size;
  sc->expiry = expiry;
  sc->options = options;
  sc->cont = cont;
  sc->cont_cls = cont_cls;
  sc->h = h;

  GNUNET_CONTAINER_DLL_insert_tail (h->store_head, h->store_tail, sc);
  GNUNET_MQ_notify_sent (ev, &store_request_sent, sc);
  GNUNET_MQ_send (h->mq, ev);
  return sc;

}
开发者ID:tg-x,项目名称:gnunet,代码行数:53,代码来源:peerstore_api.c


示例13: convert_with_table

/**
 * Convert a string of the form "4 X 5 Y" into a numeric value
 * by interpreting "X" and "Y" as units and then multiplying
 * the numbers with the values associated with the respective
 * unit from the conversion table.
 *
 * @param input input string to parse
 * @param table table with the conversion of unit names to numbers
 * @param output where to store the result
 * @return #GNUNET_OK on success, #GNUNET_SYSERR on error
 */
static int
convert_with_table (const char *input,
		    const struct ConversionTable *table,
		    unsigned long long *output)
{
  unsigned long long ret;
  char *in;
  const char *tok;
  unsigned long long last;
  unsigned int i;

  ret = 0;
  last = 0;
  in = GNUNET_strdup (input);
  for (tok = strtok (in, " "); tok != NULL; tok = strtok (NULL, " "))
  {
    do
    {
      i = 0;
      while ((table[i].name != NULL) && (0 != strcasecmp (table[i].name, tok)))
        i++;
      if (table[i].name != NULL)
      {
        last *= table[i].value;
        break; /* next tok */
      }
      else
      {
        char *endptr;
        ret += last;
        errno = 0;
        last = strtoull (tok, &endptr, 10);
        if ((0 != errno) || (endptr == tok))
        {
          GNUNET_free (in);
          return GNUNET_SYSERR;   /* expected number */
        }
        if ('\0' == endptr[0])
          break; /* next tok */
        else
          tok = endptr; /* and re-check (handles times like "10s") */
      }
    } while (GNUNET_YES);
  }
  ret += last;
  *output = ret;
  GNUNET_free (in);
  return GNUNET_OK;
}
开发者ID:claudiuolteanu,项目名称:gnunet-1,代码行数:60,代码来源:strings.c


示例14: notify_receive

static void
notify_receive (void *cls, const struct GNUNET_PeerIdentity *peer,
                const struct GNUNET_MessageHeader *message,
                const struct GNUNET_ATS_Information *ats, uint32_t ats_count)
{
  struct PeerContext *p = cls;
  struct PeerContext *t = NULL;

  if (0 == memcmp (peer, &p1->id, sizeof (struct GNUNET_PeerIdentity)))
    t = p1;
  if (0 == memcmp (peer, &p2->id, sizeof (struct GNUNET_PeerIdentity)))
    t = p2;
  GNUNET_assert (t != NULL);

  char *ps = GNUNET_strdup (GNUNET_i2s (&p->id));

  GNUNET_log (GNUNET_ERROR_TYPE_DEBUG,
              "Peer %u (`%4s') received message of type %d and size %u size from peer %u (`%4s')!\n",
              p->no, ps, ntohs (message->type), ntohs (message->size), t->no,
              GNUNET_i2s (&t->id));
  GNUNET_free (ps);

  if ((MTYPE == ntohs (message->type)) &&
      (sizeof (struct GNUNET_MessageHeader) == ntohs (message->size)))
  {
    if (restarted == GNUNET_NO)
    {
      restarted = GNUNET_YES;
      restart (p1, cfg_file_p1);
      restart (p2, cfg_file_p2);
      return;
    }
    else
    {
      GNUNET_log (GNUNET_ERROR_TYPE_DEBUG,
                  "Restarted peers connected, stopping test...\n");
      ok = 0;
      end ();
    }
  }
  else
  {
    GNUNET_break (0);
    ok = 1;
    if (die_task != GNUNET_SCHEDULER_NO_TASK)
      GNUNET_SCHEDULER_cancel (die_task);
    die_task = GNUNET_SCHEDULER_add_now (&end_badly, NULL);
  }
}
开发者ID:amatus,项目名称:gnunet-debian,代码行数:49,代码来源:test_transport_api_restart_2peers.c


示例15: GNUNET_FS_unindex_do_remove_

/**
 * Connect to the datastore and remove the blocks.
 *
 * @param uc context for the unindex operation.
 */
void
GNUNET_FS_unindex_do_remove_ (struct GNUNET_FS_UnindexContext *uc)
{
  if (NULL == uc->dsh)
    uc->dsh = GNUNET_DATASTORE_connect (uc->h->cfg);
  if (NULL == uc->dsh)
  {
    uc->state = UNINDEX_STATE_ERROR;
    uc->emsg = GNUNET_strdup (_("Failed to connect to `datastore' service."));
    GNUNET_FS_unindex_sync_ (uc);
    signal_unindex_error (uc);
    return;
  }
  uc->fh =
      GNUNET_DISK_file_open (uc->filename, GNUNET_DISK_OPEN_READ,
                             GNUNET_DISK_PERM_NONE);
  if (NULL == uc->fh)
  {
    GNUNET_DATASTORE_disconnect (uc->dsh, GNUNET_NO);
    uc->dsh = NULL;
    uc->state = UNINDEX_STATE_ERROR;
    uc->emsg = GNUNET_strdup (_("Failed to open file for unindexing."));
    GNUNET_FS_unindex_sync_ (uc);
    signal_unindex_error (uc);
    return;
  }
  uc->tc =
      GNUNET_FS_tree_encoder_create (uc->h,
                                     uc->file_size,
                                     uc,
                                     &unindex_reader,
                                     &unindex_process,
                                     &unindex_progress,
                                     &unindex_extract_keywords);
  GNUNET_FS_tree_encoder_next (uc->tc);
}
开发者ID:tg-x,项目名称:gnunet,代码行数:41,代码来源:fs_unindex.c


示例16: GPI_plugins_load

/**
 * Load and initialize all plugins.  The respective functions will be
 * invoked by the plugins when the respective events happen.  The
 * closure will be set to a 'const char*' containing the name of the
 * plugin that caused the call.
 *
 * @param cfg configuration to use
 */
void
GPI_plugins_load (const struct GNUNET_CONFIGURATION_Handle *cfg)
{
  struct TransportPlugin *plug;
  struct TransportPlugin *next;
  char *libname;
  char *plugs;
  char *pos;

  if (NULL != plugins_head)
    return; /* already loaded */
  if (GNUNET_OK !=
      GNUNET_CONFIGURATION_get_value_string (cfg, "TRANSPORT", "PLUGINS",
                                             &plugs))
    return;
  GNUNET_log (GNUNET_ERROR_TYPE_INFO, _("Starting transport plugins `%s'\n"),
              plugs);
  for (pos = strtok (plugs, " "); pos != NULL; pos = strtok (NULL, " "))
  {
    GNUNET_log (GNUNET_ERROR_TYPE_INFO, _("Loading `%s' transport plugin\n"),
                pos);
    GNUNET_asprintf (&libname, "libgnunet_plugin_transport_%s", pos);
    plug = GNUNET_malloc (sizeof (struct TransportPlugin));
    plug->short_name = GNUNET_strdup (pos);
    plug->lib_name = libname;
    plug->env.cfg = cfg;
    plug->env.cls = plug->short_name;
    GNUNET_CONTAINER_DLL_insert (plugins_head, plugins_tail, plug);
  }
  GNUNET_free (plugs);
  next = plugins_head;
  while (next != NULL)
  {
    plug = next;
    next = plug->next;
    plug->api = GNUNET_PLUGIN_load (plug->lib_name, &plug->env);
    if (plug->api == NULL)
    {
      GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
                  _("Failed to load transport plugin for `%s'\n"),
                  plug->lib_name);
      GNUNET_CONTAINER_DLL_remove (plugins_head, plugins_tail, plug);
      GNUNET_free (plug->short_name);
      GNUNET_free (plug->lib_name);
      GNUNET_free (plug);
    }
  }
}
开发者ID:h4ck3rm1k3,项目名称:gnunet-debian,代码行数:56,代码来源:gnunet-peerinfo_plugins.c


示例17: GNUNET_TESTBED_host_resolve_

/**
 * Resolves the hostname of the host to an ip address
 *
 * @param host the host whose hostname is to be resolved
 */
void
GNUNET_TESTBED_host_resolve_ (struct GNUNET_TESTBED_Host *host)
{
  char *hostname;

  hostname = (char *) host->hostname;
  host->hostname = simple_resolve (hostname);
  if (NULL == host->hostname)
  {
    GNUNET_break (0);
    host->hostname = hostname;
    return;
  }
  GNUNET_free (hostname);
  host->hostname = GNUNET_strdup (host->hostname);
}
开发者ID:GNUnet,项目名称:gnunet,代码行数:21,代码来源:testbed_api_hosts.c


示例18: path_2s

char *
path_2s (struct CadetPeerPath *p)
{
  char *s;
  char *old;
  unsigned int i;

  old = GNUNET_strdup ("");
  for (i = 0; i < p->length; i++)
  {
    GNUNET_asprintf (&s, "%s %s",
                     old, GNUNET_i2s (GNUNET_PEER_resolve2 (p->peers[i])));
    GNUNET_free_non_null (old);
    old = s;
  }
  return old;
}
开发者ID:muggenhor,项目名称:GNUnet,代码行数:17,代码来源:cadet_path.c


示例19: testing_connect_cb

static void
testing_connect_cb (struct PeerContext *p1, struct PeerContext *p2, void *cls)
{
  char *p1_c = GNUNET_strdup (GNUNET_i2s (&p1->id));

  GNUNET_log (GNUNET_ERROR_TYPE_DEBUG, "Peers connected: %u (%s) <-> %u (%s)\n",
              p1->no, p1_c, p2->no, GNUNET_i2s (&p2->id));
  GNUNET_free (p1_c);

  cc = NULL;
  test_connected = GNUNET_YES;

  measure_task =
      GNUNET_SCHEDULER_add_delayed (GNUNET_TIME_UNIT_SECONDS, &measure, NULL);
  GNUNET_SCHEDULER_add_now (&sendtask, NULL);

}
开发者ID:schanzen,项目名称:gnunet-mirror,代码行数:17,代码来源:test_quota_compliance.c


示例20: process_resolved_address

/**
 * Function to call with a human-readable format of an address
 *
 * @param cls closure
 * @param address NULL on error, otherwise 0-terminated printable UTF-8 string
 */
static void
process_resolved_address (void *cls, const char *address)
{
  struct AddressRecord * ar = cls;
  struct PrintContext *pc = ar->pc;

  if (NULL != address)
  {
    if (NULL == ar->result)
      ar->result = GNUNET_strdup (address);
    return;
  }
  ar->atsc = NULL;
  pc->num_addresses++;
  if (pc->num_addresses == pc->address_list_size)
    dump_pc (pc);
}
开发者ID:amatus,项目名称:gnunet-debian,代码行数:23,代码来源:gnunet-peerinfo.c



注:本文中的GNUNET_strdup函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ GO函数代码示例发布时间:2022-05-30
下一篇:
C++ GNUNET_malloc函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap