C++ GET_THREAD_ID函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GET_THREAD_ID函数的典型用法代码示例。如果您正苦于以下问题：C++ GET_THREAD_ID函数的具体用法？C++ GET_THREAD_ID怎么用？C++ GET_THREAD_ID使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GET_THREAD_ID函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: fetch_regs

static void
fetch_regs (struct regcache *regcache)
{
  int ret, regno, tid;
  elf_gregset_t regs;

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);
  
  ret = ptrace (PTRACE_GETREGS, tid, 0, &regs);
  if (ret < 0)
    {
      warning (_("Unable to fetch general registers."));
      return;
    }

  for (regno = ARM_A1_REGNUM; regno < ARM_PC_REGNUM; regno++)
    regcache_raw_supply (regcache, regno, (char *) &regs[regno]);

  if (arm_apcs_32)
    regcache_raw_supply (regcache, ARM_PS_REGNUM,
			 (char *) &regs[ARM_CPSR_GREGNUM]);
  else
    regcache_raw_supply (regcache, ARM_PS_REGNUM,
			 (char *) &regs[ARM_PC_REGNUM]);

  regs[ARM_PC_REGNUM] = gdbarch_addr_bits_remove
			  (get_regcache_arch (regcache), regs[ARM_PC_REGNUM]);
  regcache_raw_supply (regcache, ARM_PC_REGNUM,
		       (char *) &regs[ARM_PC_REGNUM]);
}

开发者ID:Akheon23，项目名称:chromecast-mirrored-source.toolchain，代码行数:31，代码来源:arm-linux-nat.c

示例2: fetch_fpregs

static void
fetch_fpregs (struct regcache *regcache)
{
  int ret, regno, tid;
  gdb_byte fp[ARM_LINUX_SIZEOF_NWFPE];

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);
  
  /* Read the floating point state.  */
  ret = ptrace (PT_GETFPREGS, tid, 0, fp);
  if (ret < 0)
    {
      warning (_("Unable to fetch the floating point registers."));
      return;
    }

  /* Fetch fpsr.  */
  regcache_raw_supply (regcache, ARM_FPS_REGNUM,
		       fp + NWFPE_FPSR_OFFSET);

  /* Fetch the floating point registers.  */
  for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++)
    supply_nwfpe_register (regcache, regno, fp);
}

开发者ID:Akheon23，项目名称:chromecast-mirrored-source.toolchain，代码行数:25，代码来源:arm-linux-nat.c

示例3: store_fpregs

static void
store_fpregs (const struct regcache *regcache)
{
  int ret, regno, tid;
  gdb_byte fp[ARM_LINUX_SIZEOF_NWFPE];

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);
  
  /* Read the floating point state.  */
  ret = ptrace (PT_GETFPREGS, tid, 0, fp);
  if (ret < 0)
    {
      warning (_("Unable to fetch the floating point registers."));
      return;
    }

  /* Store fpsr.  */
  if (regcache_valid_p (regcache, ARM_FPS_REGNUM))
    regcache_raw_collect (regcache, ARM_FPS_REGNUM, fp + NWFPE_FPSR_OFFSET);

  /* Store the floating point registers.  */
  for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++)
    if (regcache_valid_p (regcache, regno))
      collect_nwfpe_register (regcache, regno, fp);

  ret = ptrace (PTRACE_SETFPREGS, tid, 0, fp);
  if (ret < 0)
    {
      warning (_("Unable to store floating point registers."));
      return;
    }
}

开发者ID:Akheon23，项目名称:chromecast-mirrored-source.toolchain，代码行数:33，代码来源:arm-linux-nat.c

示例4: store_vfp_regs

static void
store_vfp_regs (const struct regcache *regcache)
{
  char regbuf[VFP_REGS_SIZE];
  int ret, regno, tid;

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);

  ret = ptrace (PTRACE_GETVFPREGS, tid, 0, regbuf);
  if (ret < 0)
    {
      warning (_("Unable to fetch VFP registers (for update)."));
      return;
    }

  for (regno = 0; regno < arm_linux_vfp_register_count; regno++)
    regcache_raw_collect (regcache, regno + ARM_D0_REGNUM,
			  (char *) regbuf + regno * 8);

  regcache_raw_collect (regcache, ARM_FPSCR_REGNUM,
			(char *) regbuf + 32 * 8);

  ret = ptrace (PTRACE_SETVFPREGS, tid, 0, regbuf);

  if (ret < 0)
    {
      warning (_("Unable to store VFP registers."));
      return;
    }
}

开发者ID:Drakey83，项目名称:steamlink-sdk，代码行数:31，代码来源:arm-linux-nat.c

示例5: fetch_wmmx_regs

static void
fetch_wmmx_regs (struct regcache *regcache)
{
  char regbuf[IWMMXT_REGS_SIZE];
  int ret, regno, tid;

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);

  ret = ptrace (PTRACE_GETWMMXREGS, tid, 0, regbuf);
  if (ret < 0)
    {
      warning (_("Unable to fetch WMMX registers."));
      return;
    }

  for (regno = 0; regno < 16; regno++)
    regcache_raw_supply (regcache, regno + ARM_WR0_REGNUM,
			 &regbuf[regno * 8]);

  for (regno = 0; regno < 2; regno++)
    regcache_raw_supply (regcache, regno + ARM_WCSSF_REGNUM,
			 &regbuf[16 * 8 + regno * 4]);

  for (regno = 0; regno < 4; regno++)
    regcache_raw_supply (regcache, regno + ARM_WCGR0_REGNUM,
			 &regbuf[16 * 8 + 2 * 4 + regno * 4]);
}

开发者ID:Drakey83，项目名称:steamlink-sdk，代码行数:28，代码来源:arm-linux-nat.c

示例6: store_regs

static void
store_regs (const struct regcache *regcache)
{
  int ret, regno, tid;
  elf_gregset_t regs;

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);
  
  /* Fetch the general registers.  */
  ret = ptrace (PTRACE_GETREGS, tid, 0, &regs);
  if (ret < 0)
    {
      warning (_("Unable to fetch general registers."));
      return;
    }

  for (regno = ARM_A1_REGNUM; regno <= ARM_PC_REGNUM; regno++)
    {
      if (REG_VALID == regcache_register_status (regcache, regno))
	regcache_raw_collect (regcache, regno, (char *) &regs[regno]);
    }

  if (arm_apcs_32 && REG_VALID == regcache_register_status (regcache, ARM_PS_REGNUM))
    regcache_raw_collect (regcache, ARM_PS_REGNUM,
			 (char *) &regs[ARM_CPSR_GREGNUM]);

  ret = ptrace (PTRACE_SETREGS, tid, 0, &regs);

  if (ret < 0)
    {
      warning (_("Unable to store general registers."));
      return;
    }
}

开发者ID:Drakey83，项目名称:steamlink-sdk，代码行数:35，代码来源:arm-linux-nat.c

示例7: broadcast_internal

 //internal version
 template <class T> T broadcast_internal(T in,int rank_from,MPI_Datatype type)
 {
   T out;
   GET_THREAD_ID();
   if(IS_MASTER_THREAD) MPI_Bcast(&in,1,type,rank_from,MPI_COMM_WORLD);
   THREAD_BROADCAST(out,in);
   return out;
 }

开发者ID:sunpho84，项目名称:nissa，代码行数:9，代码来源:mpi_routines.cpp

示例8: arm_linux_read_description

static const struct target_desc *
arm_linux_read_description (struct target_ops *ops)
{
  CORE_ADDR arm_hwcap = 0;

  if (have_ptrace_getregset == TRIBOOL_UNKNOWN)
    {
      elf_gregset_t gpregs;
      struct iovec iov;
      int tid = GET_THREAD_ID (inferior_ptid);

      iov.iov_base = &gpregs;
      iov.iov_len = sizeof (gpregs);

      /* Check if PTRACE_GETREGSET works.  */
      if (ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iov) < 0)
	have_ptrace_getregset = TRIBOOL_FALSE;
      else
	have_ptrace_getregset = TRIBOOL_TRUE;
    }

  if (target_auxv_search (ops, AT_HWCAP, &arm_hwcap) != 1)
    {
      return ops->beneath->to_read_description (ops->beneath);
    }

  if (arm_hwcap & HWCAP_IWMMXT)
    return tdesc_arm_with_iwmmxt;

  if (arm_hwcap & HWCAP_VFP)
    {
      int pid;
      char *buf;
      const struct target_desc * result = NULL;

      /* NEON implies VFPv3-D32 or no-VFP unit.  Say that we only support
	 Neon with VFPv3-D32.  */
      if (arm_hwcap & HWCAP_NEON)
	result = tdesc_arm_with_neon;
      else if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
	result = tdesc_arm_with_vfpv3;
      else
	result = tdesc_arm_with_vfpv2;

      /* Now make sure that the kernel supports reading these
	 registers.  Support was added in 2.6.30.  */
      pid = ptid_get_lwp (inferior_ptid);
      errno = 0;
      buf = alloca (VFP_REGS_SIZE);
      if (ptrace (PTRACE_GETVFPREGS, pid, 0, buf) < 0
	  && errno == EIO)
	result = NULL;

      return result;
    }

  return ops->beneath->to_read_description (ops->beneath);
}

开发者ID:Jactry，项目名称:binutils-gdb，代码行数:58，代码来源:arm-linux-nat.c

示例9: store_register

static void
store_register (const struct regcache *regcache, int regno)
{
  int ret, tid;
  elf_gregset_t regs;
  
  if (REG_VALID != regcache_register_status (regcache, regno))
    return;

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);

  /* Get the general registers from the process.  */
  if (have_ptrace_getregset == TRIBOOL_TRUE)
    {
      struct iovec iov;

      iov.iov_base = &regs;
      iov.iov_len = sizeof (regs);

      ret = ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iov);
    }
  else
    ret = ptrace (PTRACE_GETREGS, tid, 0, &regs);

  if (ret < 0)
    {
      warning (_("Unable to fetch general registers."));
      return;
    }

  if (regno >= ARM_A1_REGNUM && regno <= ARM_PC_REGNUM)
    regcache_raw_collect (regcache, regno, (char *) &regs[regno]);
  else if (arm_apcs_32 && regno == ARM_PS_REGNUM)
    regcache_raw_collect (regcache, regno,
			 (char *) &regs[ARM_CPSR_GREGNUM]);
  else if (!arm_apcs_32 && regno == ARM_PS_REGNUM)
    regcache_raw_collect (regcache, ARM_PC_REGNUM,
			 (char *) &regs[ARM_PC_REGNUM]);

  if (have_ptrace_getregset == TRIBOOL_TRUE)
    {
      struct iovec iov;

      iov.iov_base = &regs;
      iov.iov_len = sizeof (regs);

      ret = ptrace (PTRACE_SETREGSET, tid, NT_PRSTATUS, &iov);
    }
  else
    ret = ptrace (PTRACE_SETREGS, tid, 0, &regs);

  if (ret < 0)
    {
      warning (_("Unable to store general register."));
      return;
    }
}

开发者ID:ajinkya93，项目名称:netbsd-src，代码行数:58，代码来源:arm-linux-nat.c

示例10: store_fpregs

static void
store_fpregs (const struct regcache *regcache)
{
  int ret, regno, tid;
  gdb_byte fp[ARM_LINUX_SIZEOF_NWFPE];

  /* Get the thread id for the ptrace call.  */
  tid = GET_THREAD_ID (inferior_ptid);

  /* Read the floating point state.  */
  if (have_ptrace_getregset == TRIBOOL_TRUE)
    {
      elf_fpregset_t fpregs;
      struct iovec iov;

      iov.iov_base = &fpregs;
      iov.iov_len = sizeof (fpregs);

      ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iov);
    }
  else
    ret = ptrace (PT_GETFPREGS, tid, 0, fp);

  if (ret < 0)
    {
      warning (_("Unable to fetch the floating point registers."));
      return;
    }

  /* Store fpsr.  */
  if (REG_VALID == regcache_register_status (regcache, ARM_FPS_REGNUM))
    regcache_raw_collect (regcache, ARM_FPS_REGNUM, fp + NWFPE_FPSR_OFFSET);

  /* Store the floating point registers.  */
  for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++)
    if (REG_VALID == regcache_register_status (regcache, regno))
      collect_nwfpe_register (regcache, regno, fp);

  if (have_ptrace_getregset == TRIBOOL_TRUE)
    {
      struct iovec iov;

      iov.iov_base = &fp;
      iov.iov_len = ARM_LINUX_SIZEOF_NWFPE;

      ret = ptrace (PTRACE_SETREGSET, tid, NT_FPREGSET, &iov);
    }
  else
    ret = ptrace (PTRACE_SETFPREGS, tid, 0, fp);

  if (ret < 0)
    {
      warning (_("Unable to store floating point registers."));
      return;
    }
}

开发者ID:Jactry，项目名称:binutils-gdb，代码行数:56，代码来源:arm-linux-nat.c

示例11: thread_pool_stop

 //delete the thread pool
 void thread_pool_stop()
 {
   GET_THREAD_ID();
   
   //check to be thread 0
   if(thread_id!=0) crash("only thread 0 can stop the pool");
   
   //pass a NULL order
   start_threaded_function(NULL,"");
 }

开发者ID:sunpho84，项目名称:sunpho，代码行数:11，代码来源:thread.cpp

示例12: ranks_abort

  //abort
  void ranks_abort(int err)
  {
#ifdef USE_MPI
    GET_THREAD_ID();
    printf("thread %d on rank %d aborting\n",THREAD_ID,rank);
    MPI_Abort(MPI_COMM_WORLD,0);
#else
    exit(0);
#endif
  }

开发者ID:sunpho84，项目名称:nissa，代码行数:11，代码来源:mpi_routines.cpp

示例13: thread_pool_unlock

  //unlock the thread pool
  void thread_pool_unlock()
  {
    THREAD_BARRIER_FORCE();
#ifdef THREAD_DEBUG
    GET_THREAD_ID();
    if(rank==0 && VERBOSITY_LV3) printf("thread %d unlocking the pool\n",thread_id);
#endif
    thread_pool_locked=false;
    cache_flush();
  }

开发者ID:sunpho84，项目名称:sunpho，代码行数:11，代码来源:thread.cpp

示例14: ___rouent2

void ___rouent2(struct s1 *p) {
  uint32_t tid;
  uint64_t time;

  /* -- if not yet initialized, initialize VampirTrace -- */
  if (rou_init)
    {
      rou_init = 0;
      vt_open();
    }

  /* -- if VampirTrace already finalized, return -- */
  if ( !vt_is_alive ) return;

  /* -- get calling thread id -- */
  GET_THREAD_ID(tid);

  VT_SUSPEND_MALLOC_TRACING(tid);

  time = vt_pform_wtime();

  if (!p->isseen)
    {
      char* rname =  p->rout;
      char* modpos;

      /* fix opari output file names */
      if ( (modpos = strstr(p->file, ".mod.")) != NULL )
        {
          strcpy(modpos, modpos+4);
        }

#if (defined(VT_MT) || defined(VT_HYB))
      VTTHRD_LOCK_IDS();
      if (!p->isseen)
        {
          p->fid = vt_def_scl_file(tid, p->file);
          p->rid = vt_def_region(tid, rname, p->fid, p->lineno,
                                 VT_NO_LNO, NULL, VT_FUNCTION);
          p->isseen = 1;
        }
      VTTHRD_UNLOCK_IDS();
#else /* VT_MT || VT_HYB */
      p->fid = vt_def_scl_file(tid, p->file);
      p->rid = vt_def_region(tid, rname, p->fid, p->lineno,
                             VT_NO_LNO, NULL, VT_FUNCTION);
      p->isseen = 1;
#endif /* VT_MT || VT_HYB */
    }

  /* write enter trace record */
  vt_enter(tid, &time, p->rid);

  VT_RESUME_MALLOC_TRACING(tid);
}

开发者ID:Dissolubilis，项目名称:ompi-svn-mirror，代码行数:55，代码来源:vt_comp_pgi.c

示例15: THREADABLE_FUNCTION_6ARG

  THREADABLE_FUNCTION_6ARG(fft4d, complex*,out, complex*,in, int*,ext_dirs, int,ncpp, double,sign, int,normalize)
  {
    GET_THREAD_ID();
    
    //first of all put in to out
    if(out!=in) vector_copy(out,in);
    
    //list all dirs
    int dirs[NDIM],ndirs=0;
    for(int mu=0;mu<NDIM;mu++) if(ext_dirs[mu]) dirs[ndirs++]=mu;
    verbosity_lv2_master_printf("Going to FFT: %d dimensions in total\n",ndirs);
    
    if(ndirs)
      {
	//allocate buffer
	complex *buf=nissa_malloc("buf",max_locd_size*ncpp,complex);
	
	//allocate plans
	fftw_plan *plans=nissa_malloc("plans",ndirs,fftw_plan);
	if(IS_MASTER_THREAD)
	  for(int idir=0;idir<ndirs;idir++)
	    plans[idir]=fftw_plan_many_dft(1,glb_size+dirs[idir],ncpp,buf,NULL,ncpp,1,buf,NULL,ncpp,1,sign,FFTW_ESTIMATE);
	THREAD_BARRIER();
	
	//transpose each dir in turn and take fft
	for(int idir=0;idir<ndirs;idir++)
	  {
	    int mu=dirs[idir];
	    verbosity_lv2_master_printf("FFT-ing dimension %d/%d=%d\n",idir+1,ndirs,mu);
	    remap_lx_vector_to_locd(buf,out,ncpp*sizeof(complex),mu);
	    
	    //makes all the fourier transform
	    NISSA_PARALLEL_LOOP(ioff,0,locd_perp_size_per_dir[mu])
	      fftw_execute_dft(plans[idir],buf+ioff*glb_size[mu]*ncpp,buf+ioff*glb_size[mu]*ncpp);
	    THREAD_BARRIER();
	    
	    remap_locd_vector_to_lx(out,buf,ncpp*sizeof(complex),mu);
	  }
	
	//destroy plans
	if(IS_MASTER_THREAD) for(int idir=0;idir<ndirs;idir++) fftw_destroy_plan(plans[idir]);
	
	//put normaliisation
	if(normalize)
	  {
	    double norm=glb_size[dirs[0]];
	    for(int idir=1;idir<ndirs;idir++) norm*=glb_size[idir];
	    double_vector_prod_double((double*)out,(double*)out,1/norm,2*ncpp*loc_vol);
	  }
	
	nissa_free(buf);
	nissa_free(plans);
      }
  }

开发者ID:sunpho84，项目名称:nissa，代码行数:54，代码来源:fft.cpp

示例16: THREADABLE_FUNCTION_3ARG

//evolve the momenta with force
THREADABLE_FUNCTION_3ARG(evolve_lx_momenta_with_force, quad_su3*,H, quad_su3*,F, double,dt)
{
    GET_THREAD_ID();

    NISSA_PARALLEL_LOOP(ivol,0,loc_vol)
    for(int mu=0; mu<NDIM; mu++)
        for(int ic1=0; ic1<NCOL; ic1++)
            for(int ic2=0; ic2<NCOL; ic2++)
                complex_subt_the_prod_idouble(H[ivol][mu][ic1][ic2],F[ivol][mu][ic1][ic2],dt);
    THREAD_BARRIER();
}

开发者ID:sunpho84，项目名称:nissa，代码行数:12，代码来源:momenta_evolve.cpp

示例17: THREADABLE_FUNCTION_3ARG

  //summ the eight contributions, divide by two and subtract from the diagonal squared mass term
  THREADABLE_FUNCTION_3ARG(HOPPING_MATRIX_OE_OR_EO_EXPAND_TO_32_64_STAGGERED_D_SUBTRACT_FROM_MASS2_TIMES_IN, VIR_32_64_COLOR*,out, PREC_TYPE,mass2, VIR_32_64_COLOR*,in)
  {
    GET_THREAD_ID();
    
    //result of split application
    VIR_32_64_COLOR *bgq_hopping_matrix_output_data=(VIR_32_64_COLOR*)send_buf+bord_volh/2;
    
    //define workload and point to the begin of each chunk
    NISSA_CHUNK_WORKLOAD(start,chunk_load,end,0,loc_volh/2,thread_id,NACTIVE_THREADS);
    void *temp_ptr=(VIR_32_64_COMPLEX*)(bgq_hopping_matrix_output_data+start*8)-1;
    void *out_ptr=(VIR_32_64_COMPLEX*)(out+start)-1;
    void *in_ptr=(VIR_32_64_COMPLEX*)(in+start)-1;
    
    //regs
    DECLARE_REG_VIR_COLOR(reg_in);
    DECLARE_REG_VIR_COLOR(reg_out);
    DECLARE_REG_VIR_COLOR(reg_temp);
    
    //-0.5
    DECLARE_REG_VIR_COMPLEX(reg_mone_half);
    REG_SPLAT_VIR_COMPLEX(reg_mone_half,-0.5);
    
    //reg_mass2
    DECLARE_REG_VIR_COMPLEX(reg_mass2);
    REG_SPLAT_VIR_COMPLEX(reg_mass2,mass2);
    
    for(int i=start;i<end;i++)
      {
	//copy first term
	REG_LOAD_VIR_32_64_COLOR_ADVANCING(reg_out,temp_ptr);
	
	//other 7 terms
	LOAD_AND_SUMM_NEXT_TERM(reg_out,reg_temp,temp_ptr);
	LOAD_AND_SUMM_NEXT_TERM(reg_out,reg_temp,temp_ptr);
	LOAD_AND_SUMM_NEXT_TERM(reg_out,reg_temp,temp_ptr);
	LOAD_AND_SUBT_NEXT_TERM(reg_out,reg_temp,temp_ptr);
	LOAD_AND_SUBT_NEXT_TERM(reg_out,reg_temp,temp_ptr);
	LOAD_AND_SUBT_NEXT_TERM(reg_out,reg_temp,temp_ptr);
	LOAD_AND_SUBT_NEXT_TERM(reg_out,reg_temp,temp_ptr);
	
	//put final -0.5
	REG_VIR_COLOR_PROD_4DOUBLE(reg_out,reg_out,reg_mone_half);
	
	//load diagonal term, and summ it
	REG_LOAD_VIR_32_64_COLOR_ADVANCING(reg_in,in_ptr);
	REG_VIR_COLOR_SUMM_THE_PROD_4DOUBLE(reg_out,reg_out,reg_in,reg_mass2);
	
	//store
	STORE_REG_VIR_32_64_COLOR_ADVANCING(out_ptr,reg_out);
      }
    
    //final sync
    set_borders_invalid(out);
  }

开发者ID:sunpho84，项目名称:nissa，代码行数:55，代码来源:staggered_hopping_matrix_eo_or_oe_bgq_32_64.hpp

示例18: delay_marked_threads

  //delay marked threads
  void delay_marked_threads()
  {
    GET_THREAD_ID();
    
    if(delayed_thread_barrier[THREAD_ID]==1)
      {
	if(rank==0 && VERBOSITY_LV3) printf("thread %d will delay its execution,stopped at %s,%d\n",
					    THREAD_ID,glb_barr_file,glb_barr_line);
	thread_barrier_internal();
      }
  }

开发者ID:sunpho84，项目名称:sunpho，代码行数:12，代码来源:thread.cpp

示例19: THREADABLE_FUNCTION_1ARG

  THREADABLE_FUNCTION_END
  //similar for lx
  THREADABLE_FUNCTION_1ARG(generate_hmc_momenta, quad_su3*,H)
  {
    GET_THREAD_ID();
    
    NISSA_PARALLEL_LOOP(ivol,0,loc_vol)
      for(int mu=0;mu<NDIM;mu++)
	herm_put_to_gauss(H[ivol][mu],&(loc_rnd_gen[ivol]),1);
    
    set_borders_invalid(H);
  }

开发者ID:sunpho84，项目名称:nissa，代码行数:12，代码来源:momenta_generation.cpp

示例20: inv_tmD_cg_eoprec_almost_reco_sol

  //Eq.(11) up to last piece
  void inv_tmD_cg_eoprec_almost_reco_sol(spincolor *varphi,quad_su3 **conf_eos,spincolor *sol_odd,spincolor *source_evn)
  {
    GET_THREAD_ID();
    
    tmn2Deo_eos(varphi,conf_eos,sol_odd);
    NISSA_PARALLEL_LOOP(ivol,0,loc_volh)
      for(int id=0;id<NDIRAC;id++)
	for(int ic=0;ic<NCOL;ic++)
	  for(int ri=0;ri<2;ri++)
	    varphi[ivol][id][ic][ri]=source_evn[ivol][id][ic][ri]+varphi[ivol][id][ic][ri]*0.5;
    set_borders_invalid(varphi);
  }

开发者ID:sunpho84，项目名称:nissa，代码行数:13，代码来源:cg_invert_tmD_eoprec.cpp

注：本文中的GET_THREAD_ID函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GET_TIME函数代码示例发布时间：2022-05-30

C++ GET_THIS_VIRTUAL_RV函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19183|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9655|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8622|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GET_THREAD_ID函数代码示例

示例1: fetch_regs

示例2: fetch_fpregs

示例3: store_fpregs

示例4: store_vfp_regs

示例5: fetch_wmmx_regs

示例6: store_regs

示例7: broadcast_internal

示例8: arm_linux_read_description

示例9: store_register

示例10: store_fpregs

示例11: thread_pool_stop

示例12: ranks_abort

示例13: thread_pool_unlock

示例14: ___rouent2

示例15: THREADABLE_FUNCTION_6ARG

示例16: THREADABLE_FUNCTION_3ARG

示例17: THREADABLE_FUNCTION_3ARG

示例18: delay_marked_threads

示例19: THREADABLE_FUNCTION_1ARG

示例20: inv_tmD_cg_eoprec_almost_reco_sol

请发表评论

全部评论

上一篇：

下一篇：

area/language-latex: Syntax highlighting

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053