• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ GET_PKT_LEN函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中GET_PKT_LEN函数的典型用法代码示例。如果您正苦于以下问题：C++ GET_PKT_LEN函数的具体用法？C++ GET_PKT_LEN怎么用？C++ GET_PKT_LEN使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了GET_PKT_LEN函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DecodeRaw

int DecodeRaw(ThreadVars *tv, DecodeThreadVars *dtv, Packet *p, uint8_t *pkt, uint32_t len, PacketQueue *pq)
{
    StatsIncr(tv, dtv->counter_raw);

    /* If it is ipv4 or ipv6 it should at least be the size of ipv4 */
    if (unlikely(len < IPV4_HEADER_LEN)) {
        ENGINE_SET_INVALID_EVENT(p, IPV4_PKT_TOO_SMALL);
        return TM_ECODE_FAILED;
    }



    if (IP_GET_RAW_VER(pkt) == 4) {
        if (unlikely(GET_PKT_LEN(p) > USHRT_MAX)) {
            return TM_ECODE_FAILED;
        }
        SCLogDebug("IPV4 Packet");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else if (IP_GET_RAW_VER(pkt) == 6) {
        if (unlikely(GET_PKT_LEN(p) > USHRT_MAX)) {
            return TM_ECODE_FAILED;
        }
        SCLogDebug("IPV6 Packet");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else {
        SCLogDebug("Unknown ip version %" PRIu8 "", IP_GET_RAW_VER(pkt));
        ENGINE_SET_EVENT(p,IPRAW_INVALID_IPV);
    }
    return TM_ECODE_OK;
}
开发者ID:bmeeks8，项目名称:suricata，代码行数:30，代码来源:decode-raw.c


示例2: DecodeNFQ

/**
 * \brief Decode a packet coming from NFQ
 */
TmEcode DecodeNFQ(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{

    IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
    IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (PKT_IS_PSEUDOPKT(p))
        return TM_ECODE_OK;

    DecodeUpdatePacketCounters(tv, dtv, p);

    if (IPV4_GET_RAW_VER(ip4h) == 4) {
        SCLogDebug("IPv4 packet");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else if(IPV6_GET_RAW_VER(ip6h) == 6) {
        SCLogDebug("IPv6 packet");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else {
        SCLogDebug("packet unsupported by NFQ, first byte: %02x", *GET_PKT_DATA(p));
    }

    PacketDecodeFinalize(tv, dtv, p);

    return TM_ECODE_OK;
}
开发者ID:norg，项目名称:suricata，代码行数:31，代码来源:source-nfq.c


示例3: NapatechDecode

/**
 * \brief   This function passes off to link type decoders.
 *
 * NapatechDecode reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param t pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into PcapThreadVars for ptv
 * \param pq pointer to the current PacketQueue
 */
TmEcode NapatechDecode(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq,
        PacketQueue *postpq)
{
    SCEnter();

    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
//    SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);
    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));

    switch (p->datalink) {
        case LINKTYPE_ETHERNET:
            DecodeEthernet(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        default:
            SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED,
                    "Error: datalink type %" PRId32 " not yet supported in module NapatechDecode",
                    p->datalink);
            break;
    }

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}
开发者ID:yuecailing，项目名称:rep_test，代码行数:45，代码来源:source-napatech.c


示例4: DecodeIPFW

/**
 * \brief This function passes off to link type decoders.
 * \todo Unit tests are needed for this module.
 *
 * DecodeIPFW reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param tv pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into IPFWThreadVars for ptv
 * \param pq pointer to the PacketQueue
 */
TmEcode DecodeIPFW(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
    IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    SCEnter();

    /* update counters */
    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));

    /* Process IP packets */
    if (IPV4_GET_RAW_VER(ip4h) == 4) {
        SCLogDebug("DecodeIPFW ip4 processing");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

    } else if(IPV6_GET_RAW_VER(ip6h) == 6) {
        SCLogDebug("DecodeIPFW ip6 processing");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

    } else {
        /* We don't support anything besides IP packets for now, bridged packets? */
        SCLogInfo("IPFW unknown protocol support %02x", *GET_PKT_DATA(p));
       SCReturnInt(TM_ECODE_FAILED);
    }

    SCReturnInt(TM_ECODE_OK);
}
开发者ID:JakeGNA，项目名称:suricata，代码行数:43，代码来源:source-ipfw.c


示例5: NapatechDecode

/**
 * \brief   This function passes off to link type decoders.
 *
 * DecodeNapatech reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param t pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into PcapThreadVars for ptv
 * \param pq pointer to the current PacketQueue
 */
TmEcode NapatechDecode(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq,
                       PacketQueue *postpq)
{
    SCEnter();

    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* update counters */
    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
    SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);

    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
//    SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
//    SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
//            (GET_PKT_LEN(p) * 8)/1000000.0);

    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));

    switch (p->datalink) {
    case LINKTYPE_ETHERNET:
        DecodeEthernet(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
        break;
    default:
        SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED,
                   "Error: datalink type %" PRId32 " not yet supported in module DecodeNapatech",
                   p->datalink);
        break;
    }
    SCReturnInt(TM_ECODE_OK);
}
开发者ID:jerryma119，项目名称:suricata，代码行数:42，代码来源:source-napatech.c


示例6: DecodeIPFW

/**
 * \brief This function passes off to link type decoders.
 * \todo Unit tests are needed for this module.
 *
 * DecodeIPFW reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param tv pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into IPFWThreadVars for ptv
 * \param pq pointer to the PacketQueue
 */
TmEcode DecodeIPFW(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
    IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    SCEnter();

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    DecodeUpdatePacketCounters(tv, dtv, p);

    /* Process IP packets */
    if (IPV4_GET_RAW_VER(ip4h) == 4) {
        SCLogDebug("DecodeIPFW ip4 processing");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

    } else if(IPV6_GET_RAW_VER(ip6h) == 6) {
        SCLogDebug("DecodeIPFW ip6 processing");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

    } else {
        /* We don't support anything besides IP packets for now, bridged packets? */
        SCLogInfo("IPFW unknown protocol support %02x", *GET_PKT_DATA(p));
       SCReturnInt(TM_ECODE_FAILED);
    }

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}
开发者ID:AmesianX，项目名称:suricata，代码行数:47，代码来源:source-ipfw.c


示例7: AlertDebugLogDecoderEvent

static TmEcode AlertDebugLogDecoderEvent(ThreadVars *tv, const Packet *p, void *thread_data)
{
    AlertDebugLogThread *aft = (AlertDebugLogThread *)thread_data;
    int i;
    char timebuf[64];
    const char *pkt_src_str = NULL;

    if (p->alerts.cnt == 0)
        return TM_ECODE_OK;

    MemBufferReset(aft->buffer);

    CreateTimeString(&p->ts, timebuf, sizeof(timebuf));

    MemBufferWriteString(aft->buffer,
                         "+================\n"
                         "TIME:              %s\n", timebuf);
    if (p->pcap_cnt > 0) {
        MemBufferWriteString(aft->buffer,
                             "PCAP PKT NUM:      %"PRIu64"\n", p->pcap_cnt);
    }
    pkt_src_str = PktSrcToString(p->pkt_src);
    MemBufferWriteString(aft->buffer, "PKT SRC:           %s\n", pkt_src_str);
    MemBufferWriteString(aft->buffer,
                         "ALERT CNT:         %" PRIu32 "\n", p->alerts.cnt);

    for (i = 0; i < p->alerts.cnt; i++) {
        const PacketAlert *pa = &p->alerts.alerts[i];
        if (unlikely(pa->s == NULL)) {
            continue;
        }

        MemBufferWriteString(aft->buffer,
                             "ALERT MSG [%02d]:    %s\n"
                             "ALERT GID [%02d]:    %" PRIu32 "\n"
                             "ALERT SID [%02d]:    %" PRIu32 "\n"
                             "ALERT REV [%02d]:    %" PRIu32 "\n"
                             "ALERT CLASS [%02d]:  %s\n"
                             "ALERT PRIO [%02d]:   %" PRIu32 "\n",
                             i, pa->s->msg,
                             i, pa->s->gid,
                             i, pa->s->id,
                             i, pa->s->rev,
                             i, pa->s->class_msg,
                             i, pa->s->prio);
    }

    MemBufferWriteString(aft->buffer,
                         "PACKET LEN:        %" PRIu32 "\n"
                         "PACKET:\n",
                         GET_PKT_LEN(p));
    PrintRawDataToBuffer(aft->buffer->buffer, &aft->buffer->offset, aft->buffer->size,
                         GET_PKT_DATA(p), GET_PKT_LEN(p));

    aft->file_ctx->Write((const char *)MEMBUFFER_BUFFER(aft->buffer),
        MEMBUFFER_OFFSET(aft->buffer), aft->file_ctx);

    return TM_ECODE_OK;
}
开发者ID:norg，项目名称:suricata，代码行数:59，代码来源:alert-debuglog.c


示例8: AlertDebugLogDecoderEvent

TmEcode AlertDebugLogDecoderEvent(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    AlertDebugLogThread *aft = (AlertDebugLogThread *)data;
    int i;
    char timebuf[64];

    if (p->alerts.cnt == 0)
        return TM_ECODE_OK;

    MemBufferReset(aft->buffer);

    CreateTimeString(&p->ts, timebuf, sizeof(timebuf));

    MemBufferWriteString(aft->buffer,
                         "+================\n"
                         "TIME:              %s\n", timebuf);
    if (p->pcap_cnt > 0) {
        MemBufferWriteString(aft->buffer,
                             "PCAP PKT NUM:      %"PRIu64"\n", p->pcap_cnt);
    }
    MemBufferWriteString(aft->buffer,
                         "ALERT CNT:         %" PRIu32 "\n", p->alerts.cnt);

    for (i = 0; i < p->alerts.cnt; i++) {
        PacketAlert *pa = &p->alerts.alerts[i];
        if (unlikely(pa->s == NULL)) {
            continue;
        }

        MemBufferWriteString(aft->buffer,
                             "ALERT MSG [%02d]:    %s\n"
                             "ALERT GID [%02d]:    %" PRIu32 "\n"
                             "ALERT SID [%02d]:    %" PRIu32 "\n"
                             "ALERT REV [%02d]:    %" PRIu32 "\n"
                             "ALERT CLASS [%02d]:  %s\n"
                             "ALERT PRIO [%02d]:   %" PRIu32 "\n",
                             i, pa->s->msg,
                             i, pa->s->gid,
                             i, pa->s->id,
                             i, pa->s->rev,
                             i, pa->s->class_msg,
                             i, pa->s->prio);
    }

    MemBufferWriteString(aft->buffer,
                         "PACKET LEN:        %" PRIu32 "\n"
                         "PACKET:\n",
                         GET_PKT_LEN(p));
    PrintRawDataToBuffer(aft->buffer->buffer, &aft->buffer->offset, aft->buffer->size,
                         GET_PKT_DATA(p), GET_PKT_LEN(p));

    SCMutexLock(&aft->file_ctx->fp_mutex);
    (void)MemBufferPrintToFPAsString(aft->buffer, aft->file_ctx->fp);
    fflush(aft->file_ctx->fp);
    aft->file_ctx->alerts += p->alerts.cnt;
    SCMutexUnlock(&aft->file_ctx->fp_mutex);

    return TM_ECODE_OK;
}
开发者ID:KECHBIT，项目名称:suricata，代码行数:59，代码来源:alert-debuglog.c


示例9: StreamTcpInlineTest01

/** \test full overlap */
static int StreamTcpInlineTest01(void) {
    SCEnter();

    uint8_t payload1[] = "AAC"; /* packet */
    uint8_t payload2[] = "ABC"; /* segment */
    int result = 0;
    TcpSegment *t = NULL;

    Packet *p = UTHBuildPacketSrcDstPorts(payload1, sizeof(payload1)-1, IPPROTO_TCP, 1024, 80);
    if (p == NULL || p->tcph == NULL) {
        printf("generating test packet failed: ");
        goto end;
    }
    p->tcph->th_seq = htonl(10000000UL);

    t = SCMalloc(sizeof(TcpSegment));
    if (t == NULL) {
        printf("alloc TcpSegment failed: ");
        goto end;
    }
    memset(t, 0x00, sizeof(TcpSegment));
    t->payload = payload2;
    t->payload_len = sizeof(payload2)-1;
    t->seq = 10000000UL;

    StreamTcpInlineSegmentReplacePacket(p, t);

    if (!(p->flags & PKT_STREAM_MODIFIED)) {
        printf("PKT_STREAM_MODIFIED pkt flag not set: ");
        goto end;
    }

    if (memcmp(p->payload, t->payload, p->payload_len) != 0) {
        printf("Packet:\n");
        PrintRawDataFp(stdout,p->payload,p->payload_len);
        printf("Segment:\n");
        PrintRawDataFp(stdout,t->payload,t->payload_len);
        printf("payloads didn't match: ");
        goto end;
    }

    uint8_t *pkt = GET_PKT_DATA(p)+(GET_PKT_LEN(p)-sizeof(payload1)+1);
    if (memcmp(pkt,payload2,sizeof(payload2)-1) != 0) {
        PrintRawDataFp(stdout,pkt,3);
        PrintRawDataFp(stdout,GET_PKT_DATA(p),GET_PKT_LEN(p));
        goto end;
    }

    result = 1;
end:
    if (p != NULL) {
        UTHFreePacket(p);
    }
    if (t != NULL) {
        SCFree(t);
    }
    SCReturnInt(result);
}
开发者ID:58698301，项目名称:suricata，代码行数:59，代码来源:stream-tcp-inline.c


示例10: DecodeUpdatePacketCounters

void DecodeUpdatePacketCounters(ThreadVars *tv,
                                const DecodeThreadVars *dtv, const Packet *p)
{
    StatsIncr(tv, dtv->counter_pkts);
    //StatsIncr(tv, dtv->counter_pkts_per_sec);
    StatsAddUI64(tv, dtv->counter_bytes, GET_PKT_LEN(p));
    StatsAddUI64(tv, dtv->counter_avg_pkt_size, GET_PKT_LEN(p));
    StatsSetUI64(tv, dtv->counter_max_pkt_size, GET_PKT_LEN(p));
}
开发者ID:micsoftvn，项目名称:suricata，代码行数:9，代码来源:decode.c


示例11: NFQCallBack

static int NFQCallBack(struct nfq_q_handle *qh, struct nfgenmsg *nfmsg,
                       struct nfq_data *nfa, void *data)
{
    NFQThreadVars *ntv = (NFQThreadVars *)data;
    ThreadVars *tv = ntv->tv;
    int ret;

    /* grab a packet */
    Packet *p = PacketGetFromQueueOrAlloc();
    if (p == NULL) {
        return -1;
    }
    PKT_SET_SRC(p, PKT_SRC_WIRE);

    p->nfq_v.nfq_index = ntv->nfq_index;
    /* if bypass mask is set then we may want to bypass so set pointer */
    if (nfq_config.bypass_mask) {
        p->BypassPacketsFlow = NFQBypassCallback;
    }
    ret = NFQSetupPkt(p, qh, (void *)nfa);
    if (ret == -1) {
#ifdef COUNTERS
        NFQQueueVars *q = NFQGetQueue(ntv->nfq_index);
        q->errs++;
        q->pkts++;
        q->bytes += GET_PKT_LEN(p);
#endif /* COUNTERS */
        (void) SC_ATOMIC_ADD(ntv->livedev->pkts, 1);

        /* NFQSetupPkt is issuing a verdict
           so we only recycle Packet and leave */
        TmqhOutputPacketpool(tv, p);
        return 0;
    }

    p->ReleasePacket = NFQReleasePacket;

#ifdef COUNTERS
    NFQQueueVars *q = NFQGetQueue(ntv->nfq_index);
    q->pkts++;
    q->bytes += GET_PKT_LEN(p);
#endif /* COUNTERS */
    (void) SC_ATOMIC_ADD(ntv->livedev->pkts, 1);

    if (ntv->slot) {
        if (TmThreadsSlotProcessPkt(tv, ntv->slot, p) != TM_ECODE_OK) {
            TmqhOutputPacketpool(ntv->tv, p);
            return -1;
        }
    } else {
        /* pass on... */
        tv->tmqh_out(tv, p);
    }

    return 0;
}
开发者ID:vpiserchia，项目名称:suricata，代码行数:56，代码来源:source-nfq.c


示例12: ProcessErfDagRecord

/**
 * \brief   Process a DAG record into a TM packet buffer.
 * \param   prec pointer to a DAG record.
 * \param
 */
TmEcode ProcessErfDagRecord(ErfDagThreadVars *ewtn, char *prec, Packet *p)
{
    SCEnter();

    int wlen = 0;
    dag_record_t  *dr = (dag_record_t*)prec;
    erf_payload_t *pload;

    assert(prec);
    assert(p);

    if (p == NULL) SCReturnInt(TM_ECODE_OK);

    /* Only support ethernet at this time. */
    if (dr->type != TYPE_ETH &&
	    dr->type != TYPE_DSM_COLOR_ETH &&
	    dr->type != TYPE_COLOR_ETH &&
	    dr->type != TYPE_COLOR_HASH_ETH) {
        SCLogError(SC_ERR_UNIMPLEMENTED,
                   "Processing of DAG record type: %d not implemented.", dr->type);
        SCReturnInt(TM_ECODE_FAILED);
    }

    wlen = ntohs(dr->wlen);

    pload = &(dr->rec);

    SET_PKT_LEN(p, wlen - 4);   /* Trim the FCS... */
    p->datalink = LINKTYPE_ETHERNET;

    /* Take into account for link type Ethernet ETH frame starts
     * after ther ERF header + pad.
     */
    PacketCopyData(p, pload->eth.dst, GET_PKT_LEN(p));

    SCLogDebug("pktlen: %" PRIu32 " (pkt %02x, pkt data %02x)",
               GET_PKT_LEN(p), *p, *GET_PKT_DATA(p));

    /* Convert ERF time to timeval - from libpcap. */
    uint64_t ts = dr->ts;
    p->ts.tv_sec = ts >> 32;
    ts = (ts & 0xffffffffULL) * 1000000;
    ts += 0x80000000; /* rounding */
    p->ts.tv_usec = ts >> 32;
    if (p->ts.tv_usec >= 1000000) {
        p->ts.tv_usec -= 1000000;
        p->ts.tv_sec++;
    }

    ewtn->pkts++;
    ewtn->bytes += wlen;

    SCReturnInt(TM_ECODE_OK);
}
开发者ID:58698301，项目名称:suricata，代码行数:59，代码来源:source-erf-dag.c


示例13: DecodeErfDag

/**
 * \brief   This function passes off to link type decoders.
 *
 * DecodeErfDag reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param t pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into PcapThreadVars for ptv
 * \param pq pointer to the current PacketQueue
 */
TmEcode
DecodeErfDag(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq,
    PacketQueue *postpq)
{
    SCEnter();
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    DecodeUpdatePacketCounters(tv, dtv, p);

        /* call the decoder */
    switch(p->datalink) {
        case LINKTYPE_ETHERNET:
            DecodeEthernet(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        default:
            SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED,
                "Error: datalink type %" PRId32
                " not yet supported in module DecodeErfDag",
                p->datalink);
            break;
    }

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}
开发者ID:AmesianX，项目名称:suricata，代码行数:43，代码来源:source-erf-dag.c


示例14: DecodePcapFile

TmEcode DecodePcapFile(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    SCEnter();
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    DecodeUpdatePacketCounters(tv, dtv, p);

    double curr_ts = p->ts.tv_sec + p->ts.tv_usec / 1000.0;
    if (curr_ts < prev_signaled_ts || (curr_ts - prev_signaled_ts) > 60.0) {
        prev_signaled_ts = curr_ts;
        FlowWakeupFlowManagerThread();
    }

    /* update the engine time representation based on the timestamp
     * of the packet. */
    TimeSet(&p->ts);

    /* call the decoder */
    pcap_g.Decoder(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

#ifdef DEBUG
    BUG_ON(p->pkt_src != PKT_SRC_WIRE && p->pkt_src != PKT_SRC_FFR);
#endif

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}
开发者ID:EmergingThreats，项目名称:suricata，代码行数:34，代码来源:source-pcap-file.c


示例15: AlertJsonPacket

static void AlertJsonPacket(const Packet *p, json_t *js)
{
    unsigned long len = GET_PKT_LEN(p) * 2;
    uint8_t encoded_packet[len];
    Base64Encode((unsigned char*) GET_PKT_DATA(p), GET_PKT_LEN(p),
        encoded_packet, &len);
    json_object_set_new(js, "packet", json_string((char *)encoded_packet));

    /* Create packet info. */
    json_t *packetinfo_js = json_object();
    if (unlikely(packetinfo_js == NULL)) {
        return;
    }
    json_object_set_new(packetinfo_js, "linktype", json_integer(p->datalink));
    json_object_set_new(js, "packet_info", packetinfo_js);
}
开发者ID:P1sec，项目名称:suricata，代码行数:16，代码来源:output-json-alert.c


示例16: DecodeIPV6HopTest01

/**
 * \test HOP header decode
 */
static int DecodeIPV6HopTest01 (void)
{
    uint8_t raw_pkt1[] = {
        0x60,0x00,0x00,0x00,0x00,0x20,0x00,0x01,0xfe,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
        0x02,0x0f,0xfe,0xff,0xfe,0x98,0x3d,0x01,0xff,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x3a,0x00,0xff, /* 0xff is a nonsene opt */
        0x02,0x00,0x00,0x00,0x00,
        0x82,0x00,0x1c,0x6f,0x27,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
    };
    Packet *p1 = PacketGetFromAlloc();
    FAIL_IF(unlikely(p1 == NULL));
    ThreadVars tv;
    DecodeThreadVars dtv;
    PacketQueue pq;

    FlowInitConfig(FLOW_QUIET);

    memset(&pq, 0, sizeof(PacketQueue));
    memset(&tv, 0, sizeof(ThreadVars));
    memset(&dtv, 0, sizeof(DecodeThreadVars));

    PacketCopyData(p1, raw_pkt1, sizeof(raw_pkt1));

    DecodeIPV6(&tv, &dtv, p1, GET_PKT_DATA(p1), GET_PKT_LEN(p1), &pq);

    FAIL_IF (!(ENGINE_ISSET_EVENT(p1, IPV6_HOPOPTS_UNKNOWN_OPT)));

    PACKET_RECYCLE(p1);
    SCFree(p1);
    FlowShutdown();
    PASS;
}
开发者ID:micsoftvn，项目名称:suricata，代码行数:36，代码来源:decode-ipv6.c


示例17: DetectICMPV6CsumMatch

/**
 * \brief Checks if the packet sent as the argument, has a valid or invalid
 *        icmpv6 checksum, based on whether icmpv6-csum option for this rule
 *        has been supplied with "valid" or "invalid" argument
 *
 * \param t       Pointer to the tv for this detection module instance
 * \param det_ctx Pointer to the detection engine thread context
 * \param p       Pointer to the Packet currently being matched
 * \param s       Pointer to the Signature, the packet is being currently
 *                matched with
 * \param m       Pointer to the keyword_structure(SigMatch) from the above
 *                Signature, the Packet is being currently matched with
 *
 * \retval 1 if the Packet contents match the keyword option; 0 otherwise
 */
static int DetectICMPV6CsumMatch(ThreadVars *t, DetectEngineThreadCtx *det_ctx,
        Packet *p, const Signature *s, const SigMatchCtx *ctx)
{
    const DetectCsumData *cd = (const DetectCsumData *)ctx;

    if (p->ip6h == NULL || p->icmpv6h == NULL || p->proto != IPPROTO_ICMPV6 || PKT_IS_PSEUDOPKT(p) ||
        (GET_PKT_LEN(p) - ((uint8_t *)p->icmpv6h - GET_PKT_DATA(p))) <= 0) {
        return 0;
    }

    if (p->flags & PKT_IGNORE_CHECKSUM) {
        return cd->valid;
    }

    if (p->level4_comp_csum == -1) {
        uint16_t len = IPV6_GET_RAW_PLEN(p->ip6h) -
            ((uint8_t *)p->icmpv6h - (uint8_t *)p->ip6h - IPV6_HEADER_LEN);
        p->level4_comp_csum = ICMPV6CalculateChecksum(p->ip6h->s_ip6_addrs,
                                                      (uint16_t *)p->icmpv6h,
                                                      len);
    }

    if (p->level4_comp_csum == p->icmpv6h->csum && cd->valid == 1)
        return 1;
    else if (p->level4_comp_csum != p->icmpv6h->csum && cd->valid == 0)
        return 1;
    else
        return 0;
}
开发者ID:norg，项目名称:suricata，代码行数:44，代码来源:detect-csum.c


示例18: NFQCallBack

static int NFQCallBack(struct nfq_q_handle *qh, struct nfgenmsg *nfmsg,
                       struct nfq_data *nfa, void *data)
{
    NFQThreadVars *ntv = (NFQThreadVars *)data;
    ThreadVars *tv = ntv->tv;
    int ret;

    /* grab a packet */
    Packet *p = PacketGetFromQueueOrAlloc();
    if (p == NULL) {
        return -1;
    }
    PKT_SET_SRC(p, PKT_SRC_WIRE);

    p->nfq_v.nfq_index = ntv->nfq_index;
    ret = NFQSetupPkt(p, qh, (void *)nfa);
    if (ret == -1) {
#ifdef COUNTERS
        NFQQueueVars *nfq_q = NFQGetQueue(ntv->nfq_index);
        nfq_q->errs++;
        nfq_q->pkts++;
        nfq_q->bytes += GET_PKT_LEN(p);
#endif /* COUNTERS */
        /* recycle Packet and leave */
        TmqhOutputPacketpool(tv, p);
        return 0;
    }

#ifdef COUNTERS
    NFQQueueVars *nfq_q = NFQGetQueue(ntv->nfq_index);
    nfq_q->pkts++;
    nfq_q->bytes += GET_PKT_LEN(p);
#endif /* COUNTERS */

    if (ntv->slot) {
        if (TmThreadsSlotProcessPkt(tv, ntv->slot, p) != TM_ECODE_OK) {
            TmqhOutputPacketpool(ntv->tv, p);
            return -1;
        }
    } else {
        /* pass on... */
        tv->tmqh_out(tv, p);
    }

    return 0;
}
开发者ID:decanio，项目名称:suricata-tilera，代码行数:46，代码来源:source-nfq.c


示例19: AlertFastLogDecoderEvent

TmEcode AlertFastLogDecoderEvent(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    AlertFastLogThread *aft = (AlertFastLogThread *)data;
    int i;
    char timebuf[64];
    char *action = "";
    extern uint8_t engine_mode;

    if (p->alerts.cnt == 0)
        return TM_ECODE_OK;

    CreateTimeString(&p->ts, timebuf, sizeof(timebuf));

    for (i = 0; i < p->alerts.cnt; i++) {
        PacketAlert *pa = &p->alerts.alerts[i];
        if (unlikely(pa->s == NULL)) {
            continue;
        }

        if ((pa->action & ACTION_DROP) && IS_ENGINE_MODE_IPS(engine_mode)) {
            action = "[Drop] ";
        } else if (pa->action & ACTION_DROP) {
            action = "[wDrop] ";
        }

        SCMutexLock(&aft->file_ctx->fp_mutex);
        fprintf(aft->file_ctx->fp, "%s  %s[**] [%" PRIu32 ":%" PRIu32
                ":%" PRIu32 "] %s [**] [Classification: %s] [Priority: "
                "%" PRIu32 "] [**] [Raw pkt: ", timebuf, action, pa->s->gid,
                pa->s->id, pa->s->rev, pa->s->msg, pa->s->class_msg, pa->s->prio);

        PrintRawLineHexFp(aft->file_ctx->fp, GET_PKT_DATA(p), GET_PKT_LEN(p) < 32 ? GET_PKT_LEN(p) : 32);

        if (p->pcap_cnt != 0) {
            fprintf(aft->file_ctx->fp, "] [pcap file packet: %"PRIu64"]\n", p->pcap_cnt);
        } else {
            fprintf(aft->file_ctx->fp, "]\n");
        }

        fflush(aft->file_ctx->fp);
        aft->file_ctx->alerts++;
        SCMutexUnlock(&aft->file_ctx->fp_mutex);
    }

    return TM_ECODE_OK;
}
开发者ID:decanio，项目名称:suricata-tilera，代码行数:46，代码来源:alert-fastlog.c


示例20: DecodeNFQ

/**
 * \brief Decode a packet coming from NFQ
 */
TmEcode DecodeNFQ(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{

    IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
    IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
    SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
                           (GET_PKT_LEN(p) * 8)/1000000.0);
#endif

    if (IPV4_GET_RAW_VER(ip4h) == 4) {
        SCLogDebug("IPv4 packet");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else if(IPV6_GET_RAW_VER(ip6h) == 6) {
        SCLogDebug("IPv6 packet");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else {
        SCLogDebug("packet unsupported by NFQ, first byte: %02x", *GET_PKT_DATA(p));
    }

    return TM_ECODE_OK;
}
开发者ID:gcordrey，项目名称:suricata，代码行数:32，代码来源:source-nfq.c



注：本文中的GET_PKT_LEN函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ GET_PLAYER函数代码示例发布时间：2022-05-30
下一篇：
C++ GET_PKT_DATA函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap