C++ GET_NEXT_PHYSDEV函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GET_NEXT_PHYSDEV函数的典型用法代码示例。如果您正苦于以下问题：C++ GET_NEXT_PHYSDEV函数的具体用法？C++ GET_NEXT_PHYSDEV怎么用？C++ GET_NEXT_PHYSDEV使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GET_NEXT_PHYSDEV函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: windrv_SetDeviceClipping

static void windrv_SetDeviceClipping( PHYSDEV dev, HRGN rgn )
{
    dev = GET_NEXT_PHYSDEV( dev, pSetDeviceClipping );
    dev->funcs->pSetDeviceClipping( dev, rgn );
    /* also forward to the graphics driver for the OpenGL case */
    if (dev->funcs == &dib_driver)
    {
        dev = GET_NEXT_PHYSDEV( dev, pSetDeviceClipping );
        dev->funcs->pSetDeviceClipping( dev, rgn );
    }
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例2: EMFDRV_ExtSelectClipRgn

INT EMFDRV_ExtSelectClipRgn( PHYSDEV dev, HRGN hrgn, INT mode )
{
    PHYSDEV next = GET_NEXT_PHYSDEV( dev, pExtSelectClipRgn );
    EMREXTSELECTCLIPRGN *emr;
    DWORD size, rgnsize;
    BOOL ret;

    if (!hrgn)
    {
        if (mode != RGN_COPY) return ERROR;
        rgnsize = 0;
    }
    else rgnsize = GetRegionData( hrgn, 0, NULL );

    size = rgnsize + offsetof(EMREXTSELECTCLIPRGN,RgnData);
    emr = HeapAlloc( GetProcessHeap(), 0, size );
    if (rgnsize) GetRegionData( hrgn, rgnsize, (RGNDATA *)&emr->RgnData );

    emr->emr.iType = EMR_EXTSELECTCLIPRGN;
    emr->emr.nSize = size;
    emr->cbRgnData = rgnsize;
    emr->iMode     = mode;

    ret = EMFDRV_WriteRecord( dev, &emr->emr );
    HeapFree( GetProcessHeap(), 0, emr );
    return ret ? next->funcs->pExtSelectClipRgn( next, hrgn, mode ) : ERROR;
}

开发者ID:Crobin83，项目名称:wine，代码行数:27，代码来源:dc.c

示例3: windrv_GetImage

static DWORD windrv_GetImage( PHYSDEV dev, BITMAPINFO *info,
                              struct gdi_image_bits *bits, struct bitblt_coords *src )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    DWORD ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pGetImage );
    ret = dev->funcs->pGetImage( dev, info, bits, src );

    /* don't return alpha if original surface doesn't support it */
    if (info->bmiHeader.biBitCount == 32 &&
        info->bmiHeader.biCompression == BI_RGB &&
        physdev->dibdrv->dib.compression == BI_BITFIELDS)
    {
        DWORD *colors = (DWORD *)info->bmiColors;
        colors[0] = 0xff0000;
        colors[1] = 0x00ff00;
        colors[2] = 0x0000ff;
        info->bmiHeader.biCompression = BI_BITFIELDS;
    }

    if (!bits->is_copy)
    {
        /* use the freeing callback to unlock the surface */
        assert( !bits->free );
        bits->free = unlock_bits_surface;
        bits->param = physdev->surface;
    }
    else unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:32，代码来源:dc.c

示例4: dibdrv_SelectBrush

/***********************************************************************
 *           dibdrv_SelectBrush
 */
HBRUSH CDECL dibdrv_SelectBrush( PHYSDEV dev, HBRUSH hbrush )
{
    PHYSDEV next = GET_NEXT_PHYSDEV( dev, pSelectBrush );
    dibdrv_physdev *pdev = get_dibdrv_pdev(dev);
    LOGBRUSH logbrush;

    TRACE("(%p, %p)\n", dev, hbrush);

    if (!GetObjectW( hbrush, sizeof(logbrush), &logbrush )) return 0;

    if (hbrush == GetStockObject( DC_BRUSH ))
        logbrush.lbColor = GetDCBrushColor( dev->hdc );

    pdev->brush_style = logbrush.lbStyle;

    pdev->defer |= DEFER_BRUSH;

    free_pattern_brush( pdev );

    switch(logbrush.lbStyle)
    {
    case BS_SOLID:
        pdev->brush_color = pdev->dib.funcs->colorref_to_pixel(&pdev->dib, logbrush.lbColor);
        calc_and_xor_masks(GetROP2(dev->hdc), pdev->brush_color, &pdev->brush_and, &pdev->brush_xor);
        pdev->brush_rects = solid_brush;
        pdev->defer &= ~DEFER_BRUSH;
        break;

    case BS_NULL:
        pdev->brush_rects = null_brush;
        pdev->defer &= ~DEFER_BRUSH;
        break;

    case BS_DIBPATTERN:
    {
        BITMAPINFOHEADER *bi = GlobalLock((HGLOBAL)logbrush.lbHatch);
        dib_info orig_dib;

        if(!bi) return NULL;
        if(init_dib_info_from_packed(&orig_dib, bi, LOWORD(logbrush.lbColor)))
        {
            copy_dib_color_info(&pdev->brush_dib, &pdev->dib);
            if(convert_dib(&pdev->brush_dib, &orig_dib))
            {
                pdev->brush_rects = pattern_brush;
                pdev->defer &= ~DEFER_BRUSH;
            }
            free_dib_info(&orig_dib, FALSE);
        }
        GlobalUnlock((HGLOBAL)logbrush.lbHatch);
        break;
    }

    default:
        break;
    }

    return next->funcs->pSelectBrush( next, hbrush );
}

开发者ID:diosmosis，项目名称:wine，代码行数:62，代码来源:objects.c

示例5: dibdrv_SetTextColor

/***********************************************************************
 *           dibdrv_SetTextColor
 */
static COLORREF dibdrv_SetTextColor( PHYSDEV dev, COLORREF color )
{
    PHYSDEV next = GET_NEXT_PHYSDEV( dev, pSetTextColor );
    dibdrv_physdev *pdev = get_dibdrv_pdev(dev);

    pdev->text_color = get_pixel_color( pdev, color, TRUE );
    update_aa_ranges( pdev );

    return next->funcs->pSetTextColor( next, color );
}

开发者ID:Sunmonds，项目名称:wine，代码行数:13，代码来源:dc.c

示例6: EMFDRV_SetMapMode

INT EMFDRV_SetMapMode( PHYSDEV dev, INT mode )
{
    PHYSDEV next = GET_NEXT_PHYSDEV( dev, pSetMapMode );
    EMRSETMAPMODE emr;
    emr.emr.iType = EMR_SETMAPMODE;
    emr.emr.nSize = sizeof(emr);
    emr.iMode = mode;

    if (!EMFDRV_WriteRecord( dev, &emr.emr )) return 0;
    return next->funcs->pSetMapMode( next, mode );
}

开发者ID:Crobin83，项目名称:wine，代码行数:11，代码来源:dc.c

示例7: windrv_Polyline

static BOOL windrv_Polyline( PHYSDEV dev, const POINT *points, INT count )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pPolyline );
    ret = dev->funcs->pPolyline( dev, points, count );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例8: windrv_PaintRgn

static BOOL windrv_PaintRgn( PHYSDEV dev, HRGN rgn )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pPaintRgn );
    ret = dev->funcs->pPaintRgn( dev, rgn );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例9: windrv_SetPixel

static COLORREF windrv_SetPixel( PHYSDEV dev, INT x, INT y, COLORREF color )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    COLORREF ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pSetPixel );
    ret = dev->funcs->pSetPixel( dev, x, y, color );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例10: windrv_PolyPolygon

static BOOL windrv_PolyPolygon( PHYSDEV dev, const POINT *points, const INT *counts, UINT polygons )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pPolyPolygon );
    ret = dev->funcs->pPolyPolygon( dev, points, counts, polygons );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例11: windrv_Rectangle

static BOOL windrv_Rectangle( PHYSDEV dev, INT left, INT top, INT right, INT bottom )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pRectangle );
    ret = dev->funcs->pRectangle( dev, left, top, right, bottom );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例12: windrv_ExtFloodFill

static BOOL windrv_ExtFloodFill( PHYSDEV dev, INT x, INT y, COLORREF color, UINT type )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pExtFloodFill );
    ret = dev->funcs->pExtFloodFill( dev, x, y, color, type );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例13: windrv_PatBlt

static BOOL windrv_PatBlt( PHYSDEV dev, struct bitblt_coords *dst, DWORD rop )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pPatBlt );
    ret = dev->funcs->pPatBlt( dev, dst, rop );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例14: windrv_LineTo

static BOOL windrv_LineTo( PHYSDEV dev, INT x, INT y )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pLineTo );
    ret = dev->funcs->pLineTo( dev, x, y );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:11，代码来源:dc.c

示例15: EMFDRV_SetWorldTransform

BOOL EMFDRV_SetWorldTransform( PHYSDEV dev, const XFORM *xform)
{
    PHYSDEV next = GET_NEXT_PHYSDEV( dev, pSetWorldTransform );
    EMRSETWORLDTRANSFORM emr;

    emr.emr.iType = EMR_SETWORLDTRANSFORM;
    emr.emr.nSize = sizeof(emr);
    emr.xform = *xform;

    if (!EMFDRV_WriteRecord( dev, &emr.emr )) return FALSE;
    return next->funcs->pSetWorldTransform( next, xform );
}

开发者ID:Crobin83，项目名称:wine，代码行数:12，代码来源:dc.c

示例16: windrv_StretchBlt

static BOOL windrv_StretchBlt( PHYSDEV dst_dev, struct bitblt_coords *dst,
                               PHYSDEV src_dev, struct bitblt_coords *src, DWORD rop )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dst_dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dst_dev = GET_NEXT_PHYSDEV( dst_dev, pStretchBlt );
    ret = dst_dev->funcs->pStretchBlt( dst_dev, dst, src_dev, src, rop );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:12，代码来源:dc.c

示例17: windrv_RoundRect

static BOOL windrv_RoundRect( PHYSDEV dev, INT left, INT top, INT right, INT bottom,
                               INT ell_width, INT ell_height )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pRoundRect );
    ret = dev->funcs->pRoundRect( dev, left, top, right, bottom, ell_width, ell_height );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:12，代码来源:dc.c

示例18: windrv_AlphaBlend

static BOOL windrv_AlphaBlend( PHYSDEV dst_dev, struct bitblt_coords *dst,
                               PHYSDEV src_dev, struct bitblt_coords *src, BLENDFUNCTION func )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dst_dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dst_dev = GET_NEXT_PHYSDEV( dst_dev, pAlphaBlend );
    ret = dst_dev->funcs->pAlphaBlend( dst_dev, dst, src_dev, src, func );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:12，代码来源:dc.c

示例19: windrv_Pie

static BOOL windrv_Pie( PHYSDEV dev, INT left, INT top, INT right, INT bottom,
                        INT xstart, INT ystart, INT xend, INT yend )
{
    struct windrv_physdev *physdev = get_windrv_physdev( dev );
    BOOL ret;

    lock_surface( physdev->surface );
    dev = GET_NEXT_PHYSDEV( dev, pPie );
    ret = dev->funcs->pPie( dev, left, top, right, bottom, xstart, ystart, xend, yend );
    unlock_surface( physdev->surface );
    return ret;
}

开发者ID:Barrell，项目名称:wine，代码行数:12，代码来源:dc.c

示例20: EMFDRV_SelectClipPath

BOOL EMFDRV_SelectClipPath( PHYSDEV dev, INT iMode )
{
    PHYSDEV next = GET_NEXT_PHYSDEV( dev, pSelectClipPath );
    EMRSELECTCLIPPATH emr;

    emr.emr.iType = EMR_SELECTCLIPPATH;
    emr.emr.nSize = sizeof(emr);
    emr.iMode = iMode;

    if (!EMFDRV_WriteRecord( dev, &emr.emr )) return FALSE;
    return next->funcs->pSelectClipPath( next, iMode );
}

开发者ID:Crobin83，项目名称:wine，代码行数:12，代码来源:dc.c

注：本文中的GET_NEXT_PHYSDEV函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。