C++ GET_DEV函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GET_DEV函数的典型用法代码示例。如果您正苦于以下问题：C++ GET_DEV函数的具体用法？C++ GET_DEV怎么用？C++ GET_DEV使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GET_DEV函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: adf_ae_init

int adf_ae_init(struct adf_accel_dev *accel_dev)
{
	struct adf_fw_loader_data *loader_data;
	struct adf_hw_device_data *hw_device = accel_dev->hw_device;

	if (!hw_device->fw_name)
		return 0;

	loader_data = kzalloc(sizeof(*loader_data), GFP_KERNEL);
	if (!loader_data)
		return -ENOMEM;

	accel_dev->fw_loader = loader_data;
	if (qat_hal_init(accel_dev)) {
		dev_err(&GET_DEV(accel_dev), "Failed to init the AEs\n");
		kfree(loader_data);
		return -EFAULT;
	}
	if (adf_ae_reset(accel_dev, 0)) {
		dev_err(&GET_DEV(accel_dev), "Failed to reset the AEs\n");
		qat_hal_deinit(loader_data->fw_loader);
		kfree(loader_data);
		return -EFAULT;
	}
	return 0;
}

开发者ID:caseyparker，项目名称:linux，代码行数:26，代码来源:adf_accel_engine.c

示例2: adf_init_admin_comms

int adf_init_admin_comms(struct adf_accel_dev *accel_dev)
{
	struct adf_admin_comms *admin;
	struct adf_bar *pmisc = &GET_BARS(accel_dev)[ADF_DH895XCC_PMISC_BAR];
	void __iomem *csr = pmisc->virt_addr;
	void __iomem *mailbox = csr + ADF_DH895XCC_MAILBOX_BASE_OFFSET;
	uint64_t reg_val;

	admin = kzalloc_node(sizeof(*accel_dev->admin), GFP_KERNEL,
			     dev_to_node(&GET_DEV(accel_dev)));
	if (!admin)
		return -ENOMEM;
	admin->virt_addr = dma_zalloc_coherent(&GET_DEV(accel_dev), PAGE_SIZE,
					       &admin->phy_addr, GFP_KERNEL);
	if (!admin->virt_addr) {
		dev_err(&GET_DEV(accel_dev), "Failed to allocate dma buff\n");
		kfree(admin);
		return -ENOMEM;
	}
	reg_val = (uint64_t)admin->phy_addr;
	ADF_CSR_WR(csr, ADF_DH895XCC_ADMINMSGUR_OFFSET, reg_val >> 32);
	ADF_CSR_WR(csr, ADF_DH895XCC_ADMINMSGLR_OFFSET, reg_val);
	mutex_init(&admin->lock);
	admin->mailbox_addr = mailbox;
	accel_dev->admin = admin;
	return 0;
}

开发者ID:0x000000FF，项目名称:edison-linux，代码行数:27，代码来源:adf_admin.c

示例3: adf_add_key_value_data

static int adf_add_key_value_data(struct adf_accel_dev *accel_dev,
                                  const char *section,
                                  const struct adf_user_cfg_key_val *key_val)
{
    if (key_val->type == ADF_HEX) {
        long *ptr = (long *)key_val->val;
        long val = *ptr;

        if (adf_cfg_add_key_value_param(accel_dev, section,
                                        key_val->key, (void *)val,
                                        key_val->type)) {
            dev_err(&GET_DEV(accel_dev),
                    "failed to add hex keyvalue.\n");
            return -EFAULT;
        }
    } else {
        if (adf_cfg_add_key_value_param(accel_dev, section,
                                        key_val->key, key_val->val,
                                        key_val->type)) {
            dev_err(&GET_DEV(accel_dev),
                    "failed to add keyvalue.\n");
            return -EFAULT;
        }
    }
    return 0;
}

开发者ID:davyb1964，项目名称:rxe-dev，代码行数:26，代码来源:adf_ctl_drv.c

示例4: adf_ae_fw_load

int adf_ae_fw_load(struct adf_accel_dev *accel_dev)
{
	struct adf_fw_loader_data *loader_data = accel_dev->fw_loader;
	struct adf_hw_device_data *hw_device = accel_dev->hw_device;
	void *uof_addr;
	uint32_t uof_size;

	if (request_firmware(&loader_data->uof_fw, hw_device->fw_name,
			     &accel_dev->accel_pci_dev.pci_dev->dev)) {
		dev_err(&GET_DEV(accel_dev), "Failed to load firmware %s\n",
			hw_device->fw_name);
		return -EFAULT;
	}

	uof_size = loader_data->uof_fw->size;
	uof_addr = (void *)loader_data->uof_fw->data;
	if (qat_uclo_map_uof_obj(loader_data->fw_loader, uof_addr, uof_size)) {
		dev_err(&GET_DEV(accel_dev), "Failed to map UOF\n");
		goto out_err;
	}
	if (qat_uclo_wr_all_uimage(loader_data->fw_loader)) {
		dev_err(&GET_DEV(accel_dev), "Failed to map UOF\n");
		goto out_err;
	}
	return 0;

out_err:
	adf_ae_fw_release(accel_dev);
	return -EFAULT;
}

开发者ID:JcShang，项目名称:linux-80211n-csitool，代码行数:30，代码来源:adf_accel_engine.c

示例5: qat_alg_sgl_to_bufl

static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
			       struct scatterlist *assoc,
			       struct scatterlist *sgl,
			       struct scatterlist *sglout, uint8_t *iv,
			       uint8_t ivlen,
			       struct qat_crypto_request *qat_req)
{
	struct device *dev = &GET_DEV(inst->accel_dev);
	int i, bufs = 0, n = sg_nents(sgl), assoc_n = sg_nents(assoc);
	struct qat_alg_buf_list *bufl;
	struct qat_alg_buf_list *buflout = NULL;
	dma_addr_t blp;
	dma_addr_t bloutp = 0;
	struct scatterlist *sg;
	size_t sz = sizeof(struct qat_alg_buf_list) +
			((1 + n + assoc_n) * sizeof(struct qat_alg_buf));

	if (unlikely(!n))
		return -EINVAL;

	bufl = kmalloc_node(sz, GFP_ATOMIC,
			    dev_to_node(&GET_DEV(inst->accel_dev)));
	if (unlikely(!bufl))
		return -ENOMEM;

	blp = dma_map_single(dev, bufl, sz, DMA_TO_DEVICE);
	if (unlikely(dma_mapping_error(dev, blp)))
		goto err;

	for_each_sg(assoc, sg, assoc_n, i) {
		if (!sg->length)
			continue;
		bufl->bufers[bufs].addr = dma_map_single(dev,
							 sg_virt(sg),
							 sg->length,
							 DMA_BIDIRECTIONAL);
		bufl->bufers[bufs].len = sg->length;
		if (unlikely(dma_mapping_error(dev, bufl->bufers[bufs].addr)))
			goto err;
		bufs++;
	}
	bufl->bufers[bufs].addr = dma_map_single(dev, iv, ivlen,
						 DMA_BIDIRECTIONAL);
	bufl->bufers[bufs].len = ivlen;
	if (unlikely(dma_mapping_error(dev, bufl->bufers[bufs].addr)))
		goto err;
	bufs++;

	for_each_sg(sgl, sg, n, i) {
		int y = i + bufs;

		bufl->bufers[y].addr = dma_map_single(dev, sg_virt(sg),
						      sg->length,
						      DMA_BIDIRECTIONAL);
		bufl->bufers[y].len = sg->length;
		if (unlikely(dma_mapping_error(dev, bufl->bufers[y].addr)))
			goto err;
	}

开发者ID:volk3，项目名称:CS736，代码行数:58，代码来源:qat_algs.c

示例6: qat_rsa_set_n

int qat_rsa_set_n(struct qat_rsa_ctx *ctx, const char *value, size_t vlen)
{
	struct qat_crypto_instance *inst = ctx->inst;
	struct device *dev = &GET_DEV(inst->accel_dev);
	const char *ptr = value;
	int ret;

	while (!*ptr && vlen) {
		ptr++;
		vlen--;
	}

	ctx->key_sz = vlen;
	ret = -EINVAL;
	/* invalid key size provided */
	if (!qat_rsa_enc_fn_id(ctx->key_sz))
		goto err;

	ret = -ENOMEM;
	ctx->n = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_n, GFP_KERNEL);
	if (!ctx->n)
		goto err;

	memcpy(ctx->n, ptr, ctx->key_sz);
	return 0;
err:
	ctx->key_sz = 0;
	ctx->n = NULL;
	return ret;
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:30，代码来源:qat_asym_algs.c

示例7: qat_dh_set_secret

static int qat_dh_set_secret(struct crypto_kpp *tfm, const void *buf,
			     unsigned int len)
{
	struct qat_dh_ctx *ctx = kpp_tfm_ctx(tfm);
	struct device *dev = &GET_DEV(ctx->inst->accel_dev);
	struct dh params;
	int ret;

	if (crypto_dh_decode_key(buf, len, &params) < 0)
		return -EINVAL;

	/* Free old secret if any */
	qat_dh_clear_ctx(dev, ctx);

	ret = qat_dh_set_params(ctx, &params);
	if (ret < 0)
		return ret;

	ctx->xa = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_xa,
				      GFP_KERNEL);
	if (!ctx->xa) {
		qat_dh_clear_ctx(dev, ctx);
		return -ENOMEM;
	}
	memcpy(ctx->xa + (ctx->p_size - params.key_size), params.key,
	       params.key_size);

	return 0;
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:29，代码来源:qat_asym_algs.c

示例8: qat_alg_free_bufl

static void qat_alg_free_bufl(struct qat_crypto_instance *inst,
			      struct qat_crypto_request *qat_req)
{
	struct device *dev = &GET_DEV(inst->accel_dev);
	struct qat_alg_buf_list *bl = qat_req->buf.bl;
	struct qat_alg_buf_list *blout = qat_req->buf.blout;
	dma_addr_t blp = qat_req->buf.blp;
	dma_addr_t blpout = qat_req->buf.bloutp;
	size_t sz = qat_req->buf.sz;
	size_t sz_out = qat_req->buf.sz_out;
	int i;

	for (i = 0; i < bl->num_bufs; i++)
		dma_unmap_single(dev, bl->bufers[i].addr,
				 bl->bufers[i].len, DMA_BIDIRECTIONAL);

	dma_unmap_single(dev, blp, sz, DMA_TO_DEVICE);
	kfree(bl);
	if (blp != blpout) {
		/* If out of place operation dma unmap only data */
		int bufless = blout->num_bufs - blout->num_mapped_bufs;

		for (i = bufless; i < blout->num_bufs; i++) {
			dma_unmap_single(dev, blout->bufers[i].addr,
					 blout->bufers[i].len,
					 DMA_BIDIRECTIONAL);
		}
		dma_unmap_single(dev, blpout, sz_out, DMA_TO_DEVICE);
		kfree(blout);
	}
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:31，代码来源:qat_algs.c

示例9: qat_rsa_set_d

int qat_rsa_set_d(struct qat_rsa_ctx *ctx, const char *value, size_t vlen)
{
	struct qat_crypto_instance *inst = ctx->inst;
	struct device *dev = &GET_DEV(inst->accel_dev);
	const char *ptr = value;
	int ret;

	while (!*ptr && vlen) {
		ptr++;
		vlen--;
	}

	ret = -EINVAL;
	if (!ctx->key_sz || !vlen || vlen > ctx->key_sz)
		goto err;

	ret = -ENOMEM;
	ctx->d = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_d, GFP_KERNEL);
	if (!ctx->d)
		goto err;

	memcpy(ctx->d + (ctx->key_sz - vlen), ptr, vlen);
	return 0;
err:
	ctx->d = NULL;
	return ret;
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:27，代码来源:qat_asym_algs.c

示例10: adf_device_reset_worker

static void adf_device_reset_worker(struct work_struct *work)
{
	struct adf_reset_dev_data *reset_data =
		  container_of(work, struct adf_reset_dev_data, reset_work);
	struct adf_accel_dev *accel_dev = reset_data->accel_dev;

	adf_dev_restarting_notify(accel_dev);
	adf_dev_stop(accel_dev);
	adf_dev_restore(accel_dev);
	if (adf_dev_start(accel_dev)) {
		/* The device hanged and we can't restart it so stop here */
		dev_err(&GET_DEV(accel_dev), "Restart device failed\n");
		kfree(reset_data);
		WARN(1, "QAT: device restart failed. Device is unusable\n");
		return;
	}
	adf_dev_restarted_notify(accel_dev);
	clear_bit(ADF_STATUS_RESTARTING, &accel_dev->status);

	/* The dev is back alive. Notify the caller if in sync mode */
	if (reset_data->mode == ADF_DEV_RESET_SYNC)
		complete(&reset_data->compl);
	else
		kfree(reset_data);
}

开发者ID:383530895，项目名称:linux，代码行数:25，代码来源:adf_aer.c

示例11: qat_rsa_get_d

int qat_rsa_get_d(void *context, size_t hdrlen, unsigned char tag,
		  const void *value, size_t vlen)
{
	struct qat_rsa_ctx *ctx = context;
	struct qat_crypto_instance *inst = ctx->inst;
	struct device *dev = &GET_DEV(inst->accel_dev);
	const char *ptr = value;
	int ret;

	while (!*ptr && vlen) {
		ptr++;
		vlen--;
	}

	ret = -EINVAL;
	if (!ctx->key_sz || !vlen || vlen > ctx->key_sz)
		goto err;

	/* In FIPS mode only allow key size 2K & 3K */
	if (fips_enabled && (vlen != 256 && vlen != 384)) {
		pr_err("QAT: RSA: key size not allowed in FIPS mode\n");
		goto err;
	}

	ret = -ENOMEM;
	ctx->d = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_d, GFP_KERNEL);
	if (!ctx->n)
		goto err;

	memcpy(ctx->d + (ctx->key_sz - vlen), ptr, vlen);
	return 0;
err:
	ctx->d = NULL;
	return ret;
}

开发者ID:DenisLug，项目名称:mptcp，代码行数:35，代码来源:qat_asym_algs.c

示例12: QUERY

static QUERY(sniff_status_show) {
	char		*uid = *(va_arg(ap, char **));
	session_t	*s = session_find(uid);
	struct pcap_stat stats;

	if (!s)
		return -1;

	if (!s->connected)
		return 0;

	if (!s->priv) {
		debug_error("sniff_status_show() s->priv NULL\n");
		return -1;
	}

/* Device: DEVICE (PROMISC?) */

/* some stats */
	memset(&stats, 0, sizeof(struct pcap_stat));
	if (pcap_stats(GET_DEV(s), &stats) == -1) {
		debug_error("sniff_status_show() pcap_stats() failed\n");
		return -1;
	}

	debug("pcap_stats() recv: %d drop: %d ifdrop: %d\n", stats.ps_recv, stats.ps_drop, stats.ps_ifdrop);
	print("sniff_pkt_rcv",	session_name(s), ekg_itoa(stats.ps_recv));
	print("sniff_pkt_drop",	session_name(s), ekg_itoa(stats.ps_drop));
	print("sniff_conn_db",	session_name(s), ekg_itoa(list_count(tcp_connections)));

	return 0;
}

开发者ID:11mariom，项目名称:ekg2，代码行数:32，代码来源:sniff.c

示例13: qat_rsa_get_e

int qat_rsa_get_e(void *context, size_t hdrlen, unsigned char tag,
		  const void *value, size_t vlen)
{
	struct qat_rsa_ctx *ctx = context;
	struct qat_crypto_instance *inst = ctx->inst;
	struct device *dev = &GET_DEV(inst->accel_dev);
	const char *ptr = value;

	while (!*ptr && vlen) {
		ptr++;
		vlen--;
	}

	if (!ctx->key_sz || !vlen || vlen > ctx->key_sz) {
		ctx->e = NULL;
		return -EINVAL;
	}

	ctx->e = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_e, GFP_KERNEL);
	if (!ctx->e) {
		ctx->e = NULL;
		return -ENOMEM;
	}
	memcpy(ctx->e + (ctx->key_sz - vlen), ptr, vlen);
	return 0;
}

开发者ID:DenisLug，项目名称:mptcp，代码行数:26，代码来源:qat_asym_algs.c

示例14: qat_dh_set_params

static int qat_dh_set_params(struct qat_dh_ctx *ctx, struct dh *params)
{
	struct qat_crypto_instance *inst = ctx->inst;
	struct device *dev = &GET_DEV(inst->accel_dev);

	if (unlikely(!params->p || !params->g))
		return -EINVAL;

	if (qat_dh_check_params_length(params->p_size << 3))
		return -EINVAL;

	ctx->p_size = params->p_size;
	ctx->p = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_p, GFP_KERNEL);
	if (!ctx->p)
		return -ENOMEM;
	memcpy(ctx->p, params->p, ctx->p_size);

	/* If g equals 2 don't copy it */
	if (params->g_size == 1 && *(char *)params->g == 0x02) {
		ctx->g2 = true;
		return 0;
	}

	ctx->g = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_g, GFP_KERNEL);
	if (!ctx->g) {
		dma_free_coherent(dev, ctx->p_size, ctx->p, ctx->dma_p);
		ctx->p = NULL;
		return -ENOMEM;
	}
	memcpy(ctx->g + (ctx->p_size - params->g_size), params->g,
	       params->g_size);

	return 0;
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:34，代码来源:qat_asym_algs.c

示例15: adf_isr_alloc_msix_entry_table

static int adf_isr_alloc_msix_entry_table(struct adf_accel_dev *accel_dev)
{
    int i;
    char **names;
    struct msix_entry *entries;
    struct adf_hw_device_data *hw_data = accel_dev->hw_device;
    uint32_t msix_num_entries = hw_data->num_banks + 1;

    entries = kzalloc_node(msix_num_entries * sizeof(*entries),
                           GFP_KERNEL, dev_to_node(&GET_DEV(accel_dev)));
    if (!entries)
        return -ENOMEM;

    names = kcalloc(msix_num_entries, sizeof(char *), GFP_KERNEL);
    if (!names) {
        kfree(entries);
        return -ENOMEM;
    }
    for (i = 0; i < msix_num_entries; i++) {
        *(names + i) = kzalloc(ADF_MAX_MSIX_VECTOR_NAME, GFP_KERNEL);
        if (!(*(names + i)))
            goto err;
    }
    accel_dev->accel_pci_dev.msix_entries.entries = entries;
    accel_dev->accel_pci_dev.msix_entries.names = names;
    return 0;
err:
    for (i = 0; i < msix_num_entries; i++)
        kfree(*(names + i));
    kfree(entries);
    kfree(names);
    return -ENOMEM;
}

开发者ID:ravi-vid，项目名称:linux-xlnx，代码行数:33，代码来源:adf_isr.c

示例16: adf_exit_admin_comms

void adf_exit_admin_comms(struct adf_accel_dev *accel_dev)
{
	struct adf_admin_comms *admin = accel_dev->admin;

	if (!admin)
		return;

	if (admin->virt_addr)
		dma_free_coherent(&GET_DEV(accel_dev), PAGE_SIZE,
				  admin->virt_addr, admin->phy_addr);

	dma_unmap_single(&GET_DEV(accel_dev), admin->const_tbl_addr, 1024,
			 DMA_TO_DEVICE);
	mutex_destroy(&admin->lock);
	kfree(admin);
	accel_dev->admin = NULL;
}

开发者ID:AntonGitName，项目名称:au-linux-kernel-spring-2016，代码行数:17，代码来源:adf_admin.c

示例17: qat_dh_exit_tfm

static void qat_dh_exit_tfm(struct crypto_kpp *tfm)
{
	struct qat_dh_ctx *ctx = kpp_tfm_ctx(tfm);
	struct device *dev = &GET_DEV(ctx->inst->accel_dev);

	qat_dh_clear_ctx(dev, ctx);
	qat_crypto_put_instance(ctx->inst);
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:8，代码来源:qat_asym_algs.c

示例18: adf_copy_key_value_data

static int adf_copy_key_value_data(struct adf_accel_dev *accel_dev,
                                   struct adf_user_cfg_ctl_data *ctl_data)
{
    struct adf_user_cfg_key_val key_val;
    struct adf_user_cfg_key_val *params_head;
    struct adf_user_cfg_section section, *section_head;

    section_head = ctl_data->config_section;

    while (section_head) {
        if (copy_from_user(&section, (void __user *)section_head,
                           sizeof(*section_head))) {
            dev_err(&GET_DEV(accel_dev),
                    "failed to copy section info\n");
            goto out_err;
        }

        if (adf_cfg_section_add(accel_dev, section.name)) {
            dev_err(&GET_DEV(accel_dev),
                    "failed to add section.\n");
            goto out_err;
        }

        params_head = section_head->params;

        while (params_head) {
            if (copy_from_user(&key_val, (void __user *)params_head,
                               sizeof(key_val))) {
                dev_err(&GET_DEV(accel_dev),
                        "Failed to copy keyvalue.\n");
                goto out_err;
            }
            if (adf_add_key_value_data(accel_dev, section.name,
                                       &key_val)) {
                goto out_err;
            }
            params_head = key_val.next;
        }
        section_head = section.next;
    }
    return 0;
out_err:
    adf_cfg_del_all(accel_dev);
    return -EFAULT;
}

开发者ID:davyb1964，项目名称:rxe-dev，代码行数:45，代码来源:adf_ctl_drv.c

示例19: adf_vf2pf_shutdown

static void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
{
	u32 msg = (ADF_VF2PF_MSGORIGIN_SYSTEM |
	    (ADF_VF2PF_MSGTYPE_SHUTDOWN << ADF_VF2PF_MSGTYPE_SHIFT));

	if (adf_iov_putmsg(accel_dev, msg, 0))
		dev_err(&GET_DEV(accel_dev),
			"Failed to send Shutdown event to PF\n");
}

开发者ID:AntonGitName，项目名称:au-linux-kernel-spring-2016，代码行数:9，代码来源:adf_dh895xccvf_hw_data.c

示例20: COMMAND

static COMMAND(sniff_command_disconnect) {
	if (!session_connected_get(session)) {
		printq("not_connected", session_name(session));
		return -1;
	}

	protocol_disconnected_emit(session, NULL, EKG_DISCONNECT_USER);

	if (!GET_DEV(session)) {
		debug_error("sniff_command_disconnect() not dev?!\n");
		return -1;
	}

	pcap_close(GET_DEV(session));
	session->priv = NULL;

	return 0;
}

开发者ID:11mariom，项目名称:ekg2，代码行数:18，代码来源:sniff.c

注：本文中的GET_DEV函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GET_DISPATCH函数代码示例发布时间：2022-05-30

C++ GET_DATA_BYTE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19182|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9655|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8622|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GET_DEV函数代码示例

示例1: adf_ae_init

示例2: adf_init_admin_comms

示例3: adf_add_key_value_data

示例4: adf_ae_fw_load

示例5: qat_alg_sgl_to_bufl

示例6: qat_rsa_set_n

示例7: qat_dh_set_secret

示例8: qat_alg_free_bufl

示例9: qat_rsa_set_d

示例10: adf_device_reset_worker

示例11: qat_rsa_get_d

示例12: QUERY

示例13: qat_rsa_get_e

示例14: qat_dh_set_params

示例15: adf_isr_alloc_msix_entry_table

示例16: adf_exit_admin_comms

示例17: qat_dh_exit_tfm

示例18: adf_copy_key_value_data

示例19: adf_vf2pf_shutdown

示例20: COMMAND

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-24140

sussillo/hfopt-matlab: A parallel, cpu-b

emersion/go-ostatus: An OStatus library

spicetify/spicetify-cli: Commandline too

把的笔顺,知晓把的笔画,分析把的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053