• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ FunctionEditor_redraw函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中FunctionEditor_redraw函数的典型用法代码示例。如果您正苦于以下问题：C++ FunctionEditor_redraw函数的具体用法？C++ FunctionEditor_redraw怎么用？C++ FunctionEditor_redraw使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了FunctionEditor_redraw函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: menu_cb_ReverseSelection

static void menu_cb_ReverseSelection (SoundEditor me, EDITOR_ARGS_DIRECT) {
	Editor_save (me, U"Reverse selection");
	Sound_reverse ((Sound) my data, my d_startSelection, my d_endSelection);
	my v_reset_analysis ();
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:imieza，项目名称:praat，代码行数:7，代码来源:SoundEditor.cpp


示例2: menu_cb_ReverseSelection

static void menu_cb_ReverseSelection (EDITOR_ARGS) {
	EDITOR_IAM (SoundEditor);
	Editor_save (me, L"Reverse selection");
	Sound_reverse ((Sound) my data, my d_startSelection, my d_endSelection);
	my v_destroy_analysis ();
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:Crisil，项目名称:praat，代码行数:8，代码来源:SoundEditor.cpp


示例3: menu_cb_octaveDown

static void menu_cb_octaveDown (EDITOR_ARGS) {
	EDITOR_IAM (PitchEditor);
	Pitch pitch = (Pitch) my data;
	Editor_save (me, U"Octave down");
	Pitch_step (pitch, 0.5, 0.1, my d_startSelection, my d_endSelection);
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:psibre，项目名称:praat，代码行数:8，代码来源:PitchEditor.cpp


示例4: selectFormantOrBandwidth

static void selectFormantOrBandwidth (FormantGridEditor me, long iformant) {
	FormantGrid grid = (FormantGrid) my data;
	long numberOfFormants = grid -> formants -> size;
	if (iformant > numberOfFormants)
		Melder_throw (U"Cannot select formant ", iformant, U", because the FormantGrid has only ", numberOfFormants, U" formants.");
	my selectedFormant = iformant;
	FunctionEditor_redraw (me);
}
开发者ID:ffostertw，项目名称:praat，代码行数:8，代码来源:FormantGridEditor.cpp


示例5: menu_cb_addPointAtCursor

static void menu_cb_addPointAtCursor (FormantGridEditor me, EDITOR_ARGS_DIRECT) {
	Editor_save (me, U"Add point");
	FormantGrid grid = (FormantGrid) my data;
	Ordered tiers = my editingBandwidths ? grid -> bandwidths.get() : grid -> formants.get();
	RealTier tier = (RealTier) tiers -> item [my selectedFormant];
	RealTier_addPoint (tier, 0.5 * (my d_startSelection + my d_endSelection), my ycursor);
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:9，代码来源:FormantGridEditor.cpp


示例6: menu_cb_removePoints

static void menu_cb_removePoints (PointEditor me, EDITOR_ARGS_DIRECT) {
	Editor_save (me, U"Remove point(s)");
	if (my startSelection == my endSelection)
		PointProcess_removePointNear ((PointProcess) my data, my startSelection);
	else
		PointProcess_removePointsBetween ((PointProcess) my data, my startSelection, my endSelection);
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:ghedlund，项目名称:libpraat，代码行数:9，代码来源:PointEditor.cpp


示例7: menu_cb_selectFormantOrBandwidth

static void menu_cb_selectFormantOrBandwidth (FormantGridEditor me, EDITOR_ARGS_FORM) {
	EDITOR_FORM (U"Select formant or bandwidth", nullptr)
		NATURAL (U"Formant number", U"1")
	EDITOR_OK
		SET_INTEGER (U"Formant number", my selectedFormant)
	EDITOR_DO
		selectFormantOrBandwidth (me, GET_INTEGER (U"Formant number"));
		FunctionEditor_redraw (me);
	EDITOR_END
}
开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:10，代码来源:FormantGridEditor.cpp


示例8: menu_cb_removePoints

static void menu_cb_removePoints (RealTierEditor me, EDITOR_ARGS_DIRECT) {
	Editor_save (me, U"Remove point(s)");
	if (my d_startSelection == my d_endSelection)
		AnyTier_removePointNear (my data, my d_startSelection);
	else
		AnyTier_removePointsBetween (my data, my d_startSelection, my d_endSelection);
	RealTierEditor_updateScaling (me);
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:ffostertw，项目名称:praat，代码行数:10，代码来源:RealTierEditor.cpp


示例9: menu_cb_addPointAtCursor

static void menu_cb_addPointAtCursor (RealTierEditor me, EDITOR_ARGS_DIRECT) {
	if (NUMdefined (my v_minimumLegalValue ()) && my ycursor < my v_minimumLegalValue ())
		Melder_throw (U"Cannot add a point below ", my v_minimumLegalValue (), my v_rightTickUnits (), U".");
	if (NUMdefined (my v_maximumLegalValue ()) && my ycursor > my v_maximumLegalValue ())
		Melder_throw (U"Cannot add a point above ", my v_maximumLegalValue (), my v_rightTickUnits (), U".");
	Editor_save (me, U"Add point");
	RealTier_addPoint ((RealTier) my data, 0.5 * (my d_startSelection + my d_endSelection), my ycursor);
	RealTierEditor_updateScaling (me);
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:DsRQuicke，项目名称:praat，代码行数:11，代码来源:RealTierEditor.cpp


示例10: menu_cb_selectFormantOrBandwidth

static void menu_cb_selectFormantOrBandwidth (EDITOR_ARGS) {
	EDITOR_IAM (FormantGridEditor);
	EDITOR_FORM (L"Select formant or bandwidth", 0)
		NATURAL (L"Formant number", L"1")
	EDITOR_OK
		SET_INTEGER (L"Formant number", my selectedFormant)
	EDITOR_DO
		selectFormantOrBandwidth (me, GET_INTEGER (L"Formant number"));
		FunctionEditor_redraw (me);
	EDITOR_END
}
开发者ID:georgiee，项目名称:lip-sync-lpc，代码行数:11，代码来源:FormantGridEditor.cpp


示例11: menu_cb_setDynamicRange

static void menu_cb_setDynamicRange (EDITOR_ARGS) {
	EDITOR_IAM (SpectrumEditor);
	EDITOR_FORM (L"Set dynamic range", 0)
		POSITIVE (L"Dynamic range (dB)", my default_dynamicRange ())
	EDITOR_OK
		SET_REAL (L"Dynamic range", my p_dynamicRange)
	EDITOR_DO
		my pref_dynamicRange () = my p_dynamicRange = GET_REAL (L"Dynamic range");
		updateRange (me);
		FunctionEditor_redraw (me);
	EDITOR_END
}
开发者ID:arizona-phonological-imaging-lab，项目名称:ultrapraat，代码行数:12，代码来源:SpectrumEditor.cpp


示例12: menu_cb_addPointAt

static void menu_cb_addPointAt (PointEditor me, EDITOR_ARGS_FORM) {
	EDITOR_FORM (U"Add point", nullptr)
		REAL (U"Position", U"0.0");
	EDITOR_OK
		SET_REAL (U"Position", 0.5 * (my startSelection + my endSelection));
	EDITOR_DO
		Editor_save (me, U"Add point");
		PointProcess_addPoint ((PointProcess) my data, GET_REAL (U"Position"));
		FunctionEditor_redraw (me);
		Editor_broadcastDataChanged (me);
	EDITOR_END
}
开发者ID:ghedlund，项目名称:libpraat，代码行数:12，代码来源:PointEditor.cpp


示例13: menu_cb_removePoints

static void menu_cb_removePoints (FormantGridEditor me, EDITOR_ARGS_DIRECT) {
	Editor_save (me, U"Remove point(s)");
	FormantGrid grid = (FormantGrid) my data;
	Ordered tiers = my editingBandwidths ? grid -> bandwidths.get() : grid -> formants.get();
	RealTier tier = (RealTier) tiers -> item [my selectedFormant];
	if (my d_startSelection == my d_endSelection)
		AnyTier_removePointNear (tier, my d_startSelection);
	else
		AnyTier_removePointsBetween (tier, my d_startSelection, my d_endSelection);
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:12，代码来源:FormantGridEditor.cpp


示例14: menu_cb_setFormantRange

static void menu_cb_setFormantRange (FormantGridEditor me, EDITOR_ARGS_FORM) {
	EDITOR_FORM (U"Set formant range", nullptr)
		REAL (U"Minimum formant (Hz)", my default_formantFloor   ())
		REAL (U"Maximum formant (Hz)", my default_formantCeiling ())
	EDITOR_OK
		SET_REAL (U"Minimum formant", my p_formantFloor)
		SET_REAL (U"Maximum formant", my p_formantCeiling)
	EDITOR_DO
		my pref_formantFloor   () = my p_formantFloor   = GET_REAL (U"Minimum formant");
		my pref_formantCeiling () = my p_formantCeiling = GET_REAL (U"Maximum formant");
		FunctionEditor_redraw (me);
	EDITOR_END
}
开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:13，代码来源:FormantGridEditor.cpp


示例15: menu_cb_setBandwidthRange

static void menu_cb_setBandwidthRange (FormantGridEditor me, EDITOR_ARGS_FORM) {
	EDITOR_FORM (U"Set bandwidth range", nullptr)
		REAL (U"Minimum bandwidth (Hz)", my default_bandwidthFloor   ())
		REAL (U"Maximum bandwidth (Hz)", my default_bandwidthCeiling ())
	EDITOR_OK
		SET_REAL (U"Minimum bandwidth", my p_bandwidthFloor)
		SET_REAL (U"Maximum bandwidth", my p_bandwidthCeiling)
	EDITOR_DO
		my pref_bandwidthFloor   () = my p_bandwidthFloor   = GET_REAL (U"Minimum bandwidth");
		my pref_bandwidthCeiling () = my p_bandwidthCeiling = GET_REAL (U"Maximum bandwidth");
		FunctionEditor_redraw (me);
	EDITOR_END
}
开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:13，代码来源:FormantGridEditor.cpp


示例16: menu_cb_SetSelectionToZero

static void menu_cb_SetSelectionToZero (SoundEditor me, EDITOR_ARGS_DIRECT) {
	Sound sound = (Sound) my data;
	long first, last;
	Sampled_getWindowSamples (sound, my d_startSelection, my d_endSelection, & first, & last);
	Editor_save (me, U"Set to zero");
	for (long channel = 1; channel <= sound -> ny; channel ++) {
		for (long i = first; i <= last; i ++) {
			sound -> z [channel] [i] = 0.0;
		}
	}
	my v_reset_analysis ();
	FunctionEditor_redraw (me);
	Editor_broadcastDataChanged (me);
}
开发者ID:imieza，项目名称:praat，代码行数:14，代码来源:SoundEditor.cpp


示例17: menu_cb_setBandwidthRange

static void menu_cb_setBandwidthRange (EDITOR_ARGS) {
	EDITOR_IAM (FormantGridEditor);
	EDITOR_FORM (L"Set bandwidth range", 0)
		REAL (L"Minimum bandwidth (Hz)", L"0.0")
		REAL (L"Maximum bandwidth (Hz)", L"1000.0")
	EDITOR_OK
		SET_REAL (L"Minimum bandwidth", my bandwidthFloor)
		SET_REAL (L"Maximum bandwidth", my bandwidthCeiling)
	EDITOR_DO
		preferences.bandwidthFloor = my bandwidthFloor = GET_REAL (L"Minimum bandwidth");
		preferences.bandwidthCeiling = my bandwidthCeiling = GET_REAL (L"Maximum bandwidth");
		FunctionEditor_redraw (me);
	EDITOR_END
}
开发者ID:georgiee，项目名称:lip-sync-lpc，代码行数:14，代码来源:FormantGridEditor.cpp


示例18: menu_cb_setFormantRange

static void menu_cb_setFormantRange (EDITOR_ARGS) {
	EDITOR_IAM (FormantGridEditor);
	EDITOR_FORM (L"Set formant range", 0)
		REAL (L"Minimum formant (Hz)", L"0.0")
		REAL (L"Maximum formant (Hz)", L"11000.0")
	EDITOR_OK
		SET_REAL (L"Minimum formant", my formantFloor)
		SET_REAL (L"Maximum formant", my formantCeiling)
	EDITOR_DO
		preferences.formantFloor = my formantFloor = GET_REAL (L"Minimum formant");
		preferences.formantCeiling = my formantCeiling = GET_REAL (L"Maximum formant");
		FunctionEditor_redraw (me);
	EDITOR_END
}
开发者ID:georgiee，项目名称:lip-sync-lpc，代码行数:14，代码来源:FormantGridEditor.cpp


示例19: menu_cb_stopBand

static void menu_cb_stopBand (EDITOR_ARGS) {
	EDITOR_IAM (SpectrumEditor);
	EDITOR_FORM (L"Filter (stop Hann band)", 0)
		REAL (L"Band smoothing (Hz)", my default_bandSmoothing ())
	EDITOR_OK
		SET_REAL (L"Band smoothing", my p_bandSmoothing)
	EDITOR_DO
		my pref_bandSmoothing () = my p_bandSmoothing = GET_REAL (L"Band smoothing");
		if (my d_endSelection <= my d_startSelection) Melder_throw (L"To apply a band-stop filter, first make a selection.");
		Editor_save (me, L"Stop band");
		Spectrum_stopHannBand ((Spectrum) my data, my d_startSelection, my d_endSelection, my p_bandSmoothing);
		FunctionEditor_redraw (me);
		my broadcastDataChanged ();
	EDITOR_END
}
开发者ID:arizona-phonological-imaging-lab，项目名称:ultrapraat，代码行数:15，代码来源:SpectrumEditor.cpp


示例20: menu_cb_addPointAt

static void menu_cb_addPointAt (FormantGridEditor me, EDITOR_ARGS_FORM) {
	EDITOR_FORM (U"Add point", nullptr)
		REAL (U"Time (s)", U"0.0")
		POSITIVE (U"Frequency (Hz)", U"200.0")
	EDITOR_OK
		SET_REAL (U"Time", 0.5 * (my d_startSelection + my d_endSelection))
		SET_REAL (U"Frequency", my ycursor)
	EDITOR_DO
		Editor_save (me, U"Add point");
		FormantGrid grid = (FormantGrid) my data;
		Ordered tiers = my editingBandwidths ? grid -> bandwidths.get() : grid -> formants.get();
		RealTier tier = (RealTier) tiers -> item [my selectedFormant];
		RealTier_addPoint (tier, GET_REAL (U"Time"), GET_REAL (U"Frequency"));
		FunctionEditor_redraw (me);
		Editor_broadcastDataChanged (me);
	EDITOR_END
}
开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:17，代码来源:FormantGridEditor.cpp



注：本文中的FunctionEditor_redraw函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ FunctionIn函数代码示例发布时间：2022-05-30
下一篇：
C++ FunctionCall2函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap