C++ FloatToStr函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FloatToStr函数的典型用法代码示例。如果您正苦于以下问题：C++ FloatToStr函数的具体用法？C++ FloatToStr怎么用？C++ FloatToStr使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FloatToStr函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: BSlider

TSliderComponent::TSliderComponent(const char *AComponentName, const char *AClassName, BRect AFrame, TComponent *AFatherComponent):
BSlider(AFrame,AComponentName,AComponentName,NULL,0,100),TComponentKindaView(AComponentName,AClassName,this)
{
	float largeur,hauteur;

	FParent = AFatherComponent;
	FCodeGenerator = new TSliderCodeGenerator(this,true);
	FPropertyList->AddProperty(PROP_NAME,AComponentName,PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);
	FPropertyList->AddProperty(PROP_CLASSNAME,AClassName,PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);
	FPropertyList->AddProperty(PROP_LABEL,AComponentName,PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);

	FPropertyList->AddProperty(PROP_MIN,"0",PROP_TYPE_FLOAT,false,true,"",PROP_GENERAL_GROUP);
	FPropertyList->AddProperty(PROP_MAX,"100",PROP_TYPE_FLOAT,false,true,"",PROP_GENERAL_GROUP);

	FPropertyList->AddProperty(PROP_THUMB,"B_BLOCK_THUMB",PROP_TYPE_FLOAT,true,false,
								"B_BLOCK_THUMB;B_TRIANGLE_THUMB",
								PROP_GENERAL_GROUP);
	FPropertyList->AddProperty(PROP_MESSAGE,"NULL",PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);

	FPropertyList->AddProperty(PROP_RESIZING_MODE,"B_FOLLOW_LEFT | B_FOLLOW_TOP",PROP_TYPE_FLOAT,true,false,
								"B_FOLLOW_LEFT;B_FOLLOW_RIGHT;B_FOLLOW_LEFT_RIGHT;B_FOLLOW_H_CENTER;B_FOLLOW_TOP;B_FOLLOW_BOTTOM;B_FOLLOW_TOP_BOTTOM;B_FOLLOW_V_CENTER;B_FOLLOW_ALL_SIDES;B_FOLLOW_NONE",
								PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_FLAGS,"B_NAVIGABLE | B_WILL_DRAW",PROP_TYPE_FLOAT,true,false,
								"B_WILL_DRAW;B_PULSE_NEEDED;B_FRAME_EVENTS;B_FULL_UPDATE_ON_RESIZE;B_NAVIGABLE;B_NAVIGABLE_JUMP;B_SUBPIXEL_PRECISE",
								PROP_POSITION_GROUP);

	GetPreferredSize(&largeur,&hauteur);
	ResizeTo(largeur,hauteur);
	AFrame = Frame();	
	FPropertyList->AddProperty(PROP_TOP,FloatToStr(AFrame.top),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_LEFT,FloatToStr(AFrame.left),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_RIGHT,FloatToStr(AFrame.right),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_BOTTOM,FloatToStr(AFrame.bottom),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);

	FHandler = this; // on fait pointer le FHandler interne du TCOmponent dont on a besoin dans TComponentItem.
	FElement = this;
//	Show(); 
}

开发者ID:HaikuArchives，项目名称:BeBuilder，代码行数:38，代码来源:SliderComponent.cpp

示例2: switch

std::string evalute::evalute_b2Body(Watch* watch)
{
    std::string name = watch->MemberName;
    std::string result = "";
    b2Body* body = boost::get<b2Body*>(watch->Object);

    if( name == "Type")
    {
        b2BodyType type = body->GetType();
        switch(type)
        {
            case b2_staticBody: result = "StaticBody"; break;
            case b2_dynamicBody: result = "DynamicBody"; break;
            case b2_kinematicBody: result = "KinematicBody"; break;
            default: result = "Unknown type";
        }
    }
    else if(name == "Position") result = VectorToStr(body->GetPosition());
    else if(name == "Angle") result = FloatToStr(body->GetAngle());
    else if(name == "WorldCenter") result = VectorToStr(body->GetWorldCenter());
    else if(name == "LocalCenter") result = VectorToStr(body->GetLocalCenter());
    else if(name == "LinearVelocity") result = VectorToStr(body->GetLinearVelocity());
    else if(name == "AngularVelocity") result = FloatToStr(body->GetAngularVelocity());
    else if(name == "Inertia") result = FloatToStr(body->GetInertia());
    else if(name == "LinearDamping") result = FloatToStr(body->GetLinearDamping());
    else if(name == "AngularDamping")result = FloatToStr(body->GetAngularDamping());
    else if(name == "Bullet") result = BoolToStr(body->IsBullet());
    else if(name == "SleepingAllowed") result = BoolToStr(body->IsSleepingAllowed());
    else if(name == "Awake") result = BoolToStr(body->IsAwake());
    else if(name == "Active") result = BoolToStr(body->IsActive());
    else if(name == "FixedRotation") result = BoolToStr(body->IsFixedRotation());
    bool mass = false;
    std::string massValuePrefix = "", massCenterPrefix = "", massRotationInertiaPrefix = "";
    b2MassData massData;
    body->GetMassData(&massData);
    if( name == "Mass")
    {
        mass = true;
        result = "{ ";
        massValuePrefix = "Value = ";
        massCenterPrefix = ", Center = ";
        massRotationInertiaPrefix = ", RotationInertia = ";
    }
    if( name == "Mass.Value" || mass) result += massValuePrefix + FloatToStr(massData.mass);
    if( name == "Mass.Center" || mass) result += massCenterPrefix + VectorToStr(massData.center);
    if( name == "Mass.RotationInertia" || mass)
        result += massRotationInertiaPrefix + FloatToStr(massData.I);
    if(mass) result += " }";

    if(result == "") result = "Can't evalute";

    return result;
}

开发者ID:Phosfor，项目名称:Themisto，代码行数:53，代码来源:EvaluteFunctions.cpp

示例3: StrToFloatDef

void __fastcall TfrmPropVisor::DownClickDbl(TObject *Sender)
{
  const long double inc = 0.01;
  long double value;
  try{
    value = StrToFloatDef(((TEdit*)((TCSpinButton*)Sender)->FocusControl)->Text, 1);
  }catch(...){
    return;}
  if( (value - inc) > 0.0 )
    value -= inc;
  else
    value = 1;
  ((TEdit*)((TCSpinButton*)Sender)->FocusControl)->Text = FloatToStr(value);
}

开发者ID:clubdesarrolladores，项目名称:maxmath，代码行数:14，代码来源:fPropVisor.cpp

示例4: StrToIntDef

void __fastcall TfrmPropVisor::UpClickInt(TObject *Sender)
{
  const int inc = 1;
  int value;
  try{
    value = StrToIntDef(((TEdit*)((TCSpinButton*)Sender)->FocusControl)->Text, 1);
  }catch(...){
    return;}
  if( (value + inc) <= ((TEdit*)((TCSpinButton*)Sender)->FocusControl)->Tag )
    value += inc;
  else
    value = ((TEdit*)((TCSpinButton*)Sender)->FocusControl)->Tag;
  ((TEdit*)((TCSpinButton*)Sender)->FocusControl)->Text = FloatToStr(value);
}

开发者ID:clubdesarrolladores，项目名称:maxmath，代码行数:14，代码来源:fPropVisor.cpp

示例5: GlobalMemoryStatus

//---------------------------------------------------------------------------
void __fastcall TfrmAbout::FormActivate(TObject *Sender)
{
 MEMORYSTATUS MS;

  GlobalMemoryStatus(&MS);

  PhysMem->Caption  = "Всего физической памяти : "      + FormatFloat("#,###' KB'", MS.dwTotalPhys / 1024.0);
  FreeRes->Caption  = "Используется в данный момент : " + IntToStr(MS.dwMemoryLoad) + " %";
  CpuLabel->Caption = "Частота процессора : ";

  CpuLabel->Caption = CpuLabel->Caption + FloatToStr(int((GetCPUSpeed() * 0.9989544010)*10.0)/10.0) + " МГц";

  //DecimalSeparator = '.';
}

开发者ID:Medcheg，项目名称:sources_old，代码行数:15，代码来源:Unit_About.cpp

示例6: StrToFloat

void __fastcall TForm1::Button2Click(TObject *Sender)
{
double a = StrToFloat(Edit3->Text);
double b = StrToFloat(Edit4->Text);
double c = StrToFloat(Edit5->Text);
z = calculate(1, 2)+1/2.;
z = f() + fabs(pow(x - sin(y),1/3.));
z = fabs(pow(y+9/5.+f(1, 2),1/3.));
z = func(a(1/2.,1/2.),3);
z=mas[i+2]+1/2.;
double ans = arifm((a + b) / (a - c * b), b * b - 2 * a * c, 3 * pow(c, a - b)) -
             arifm((c + a) / (a * b), sqrt(b) / pow(a, 1. / 3), pow(a, b + 1. / c));
ShowMessage(FloatToStr(ans));
}

开发者ID:File5，项目名称:Auto_diagram，代码行数:14，代码来源:file4.cpp

示例7: fopen

void __fastcall TSharpnessForm1::btn_sp_SaveClick(TObject *Sender)
{
        if(!SaveDialog1->Execute())
                return;
        String Fpath = SaveDialog1->FileName;
        FILE* fptr = fopen (Fpath.c_str(),"w");

        AnsiString str[5];
        str[0] = "TEXT_DET";
        str[1] = "HORZ_THR";
        str[2] = "VERT_THR";
        str[3] = "EDGE_THR";
        str[4] = "GLT_STR";     //hardwre gain

        AnsiString input_str[5];
        for(int i = 0; i <= 3; i++)
                input_str[i] = "0";
        input_str[4] = "1";

        for(int i = 0; i < OSP->SPChkBox_Nbr; i++){
                if(SameText(ChkB[i]->Addr.Name(),str[0])){
                        input_str[0] = (ChkB[i]->Chkb->Checked?"1":"0");
                        break;
                }
        }
        for(int j = 0; j <= 3; j++)
                for(int i = 0; i < OSP->SPScrollBar_Nbr; i++){
                        if(SameText(ScrlB[i]->Addr.Name(),str[j])){
                                input_str[j] = ScrlB[i]->ScrlB->Position;
                                break;
                        }
                }
       for(int i = 0; i < OSP->SPScrollBar_Nbr; i++){
                if(SameText(ScrlB[i]->Addr.Name(),str[4])){
                                float val = (float)ScrlB[i]->ScrlB->Position*4;
                                input_str[4] = FloatToStr(val);
                                break;
                }
       }
        float input_str5 = StrToFloat(sb_softgain->Position)/10;

        fprintf(fptr,"%s\t%s\t%s\t%s\t%s\t%f\n",input_str[0],input_str[1],input_str[2],
        input_str[3],input_str[4],input_str5);

        for(int i = 0; i < 32; i++){
                fprintf(fptr,"%d\n", SP_lut[i]);
        }
        fclose(fptr);
}

开发者ID:beaver999，项目名称:mygoodjob，代码行数:49，代码来源:Sharpness1.cpp

示例8: get_matr

void __fastcall TForm1::Button1Click(TObject *Sender)
{
  double matrix[8][8]={
	{0,1,0,0,1,0,1,0},
	{1,0,1,0,0,0,0,0},
	{0,1,0,1,0,0,1,0},
	{0,0,1,0,0,0,1,1},
	{1,0,0,0,0,1,0,0},
	{0,0,0,0,1,0,0,0},
	{1,0,1,1,0,0,0,1},
	{0,0,0,1,0,0,1,0}
	};
get_matr (matrix);
Edit1->Text =FloatToStr(det (matrix));
}

开发者ID:mushrooom，项目名称:newrep，代码行数:15，代码来源:Unit1.cpp

示例9: FloatToStr

moText
moGLMatrixf::ToJSON() const {
  moText JSON = "[";
  moText comma="",nline="";
  for(int j=0;j<4; j++) {
    JSON+= nline;
    for(int i=0;i<4; i++) {
      JSON+= comma + FloatToStr( (*this)[j][i] );
      comma=",";
    }
    nline="\n";
  }
  JSON+= "]";
  return JSON;
}

开发者ID:moldeo，项目名称:libmoldeo，代码行数:15，代码来源:moGLManager.cpp

示例10: StrToFloat

void __fastcall TframTag::edtCompDevPercentChange(TObject *Sender)
{
	//
	try{
		__r4 percent;
		percent = StrToFloat(edtCompDevPercent->Text);
		if(percent < 0 || percent > 100){
			return;
		}
		__r4 span = _getSpan(&m_Tag);
		m_Tag.s.CompDev = percent * span / 100;
        edtCompDev->Text = FloatToStr(m_Tag.s.CompDev);
	}catch(...){
	}
}

开发者ID:eseawind，项目名称:CNCS_PMC-Conductor，代码行数:15，代码来源:untTagView.cpp

示例11: BTextControl

TTextControlComponent::TTextControlComponent(const char *AComponentName,const char *AClassName, BRect AFrame, TComponent *AFatherComponent):
BTextControl(AFrame,AComponentName,NULL,"Some Text",NULL,B_FOLLOW_LEFT | B_FOLLOW_TOP,B_FRAME_EVENTS | B_WILL_DRAW | B_NAVIGABLE),TComponentKindaView(AComponentName,AClassName,this)
{
	float largeur,hauteur;
	FHandler = this;
	FParent = AFatherComponent;
	FCodeGenerator = new TTextControlCodeGenerator(this,true);
	FPropertyList->AddProperty(PROP_NAME,AComponentName,PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);
	FPropertyList->AddProperty(PROP_CLASSNAME,AClassName,PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);
	if (Label()==NULL) 
	{
		FPropertyList->AddProperty(PROP_LABEL,"",PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);
	}
	else
		FPropertyList->AddProperty(PROP_LABEL,Label(),PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);
	FPropertyList->AddProperty(PROP_MESSAGE,"NULL",PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);

	FPropertyList->AddProperty(PROP_RESIZING_MODE,"B_FOLLOW_LEFT | B_FOLLOW_TOP",PROP_TYPE_FLOAT,true,false,
								"B_FOLLOW_LEFT;B_FOLLOW_RIGHT;B_FOLLOW_LEFT_RIGHT;B_FOLLOW_H_CENTER;B_FOLLOW_TOP;B_FOLLOW_BOTTOM;B_FOLLOW_TOP_BOTTOM;B_FOLLOW_V_CENTER;B_FOLLOW_ALL_SIDES;B_FOLLOW_NONE",
								PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_FLAGS,"B_NAVIGABLE | B_WILL_DRAW",PROP_TYPE_FLOAT,true,false,
								"B_WILL_DRAW;B_PULSE_NEEDED;B_FRAME_EVENTS;B_FULL_UPDATE_ON_RESIZE;B_NAVIGABLE;B_NAVIGABLE_JUMP;B_SUBPIXEL_PRECISE",
								PROP_POSITION_GROUP);

	FPropertyList->AddProperty(PROP_TEXT,Text(),PROP_TYPE_STRING,false,true,"",PROP_GENERAL_GROUP);

	GetPreferredSize(&largeur,&hauteur);
	ResizeTo(largeur,hauteur);

	AFrame = Frame();	
	FPropertyList->AddProperty(PROP_TOP,FloatToStr(AFrame.top),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_LEFT,FloatToStr(AFrame.left),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_RIGHT,FloatToStr(AFrame.right),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);
	FPropertyList->AddProperty(PROP_BOTTOM,FloatToStr(AFrame.bottom),PROP_TYPE_FLOAT,false,true,"",PROP_POSITION_GROUP);

}

开发者ID:HaikuArchives，项目名称:BeBuilder，代码行数:36，代码来源:TextControlComponent.cpp

示例12: CalculateSigma

void __fastcall TFormMain::OnAnyTrackBarChange(
      TObject *Sender)
{
  const int sz = TrackBarSize->Position;
  const double angle = 2.0 * M_PI
    * static_cast<double>(TrackBarAngle->Position)
    / static_cast<double>(TrackBarAngle->Max);
  const double wavelength = 16.0
    * static_cast<double>(TrackBarWavelength->Position)
    / static_cast<double>(TrackBarWavelength->Max);
  const double sigma = CalculateSigma(sz/2);
  LabelSize->Caption = "Size: " + IntToStr(sz) + " pixels";
  LabelAngle->Caption = "Angle: " + FloatToStr(angle) + " radians";
  LabelWavelength->Caption = "Wavelength: " + FloatToStr(wavelength) + " pixels";
  LabelSigma->Caption = "Sigma: " + FloatToStr(sigma);

  mFilter = CreateGaborFilter(sz,angle,wavelength,sigma);

  SurfacePlotter p(ImageFilter);
  p.SetSurfaceGrey(mFilter);
  ImageFilter->Refresh();


}

开发者ID:RLED，项目名称:ProjectRichelBilderbeek，代码行数:24，代码来源:UnitFormMain.cpp

示例13: rgb2hsv

void __fastcall THSVFormOrg::Hue_ImgMouseDown(TObject * Sender,
					      TMouseButton Button, TShiftState Shift, int X, int Y)
{
    int color;
    double h, s, v, i, r, g, b;
    color = Hue_Img->Canvas->Pixels[X][Y];

    b = color / 65536;
    g = color / 256 % 256;
    r = color % 256;

    rgb2hsv(r, g, b, &h, &s, &i, &v);
    ed_Hue_Custom->Text = FloatToStr(h);
    Set_6HSV_grid();
}

开发者ID:beaver999，项目名称:mygoodjob，代码行数:15，代码来源:HueSatVal1.cpp

示例14: imprimirValor

void imprimirValor(struct ArgPresentaValor* arg){
  
  byte decimales= getDecimales();
  int Val= getValor(arg); 
	char str[7];
	OutputStream_writeStr(getCartel(arg));
	
	if(arg->val!=NULL) {
	  OutputStream_writeStr(" ");
	  FloatToStr(Val,str,6,decimales);
    OutputStream_writeStr(str);
    OutputStream_writeStr(" ");
	}else
	  OutputStream_writeStr("\n");
}

开发者ID:jonyMarino，项目名称:dhacel-micro-prog-vieja，代码行数:15，代码来源:presentarValor.c

示例15: switch

// ---------------------------------------------------------------------------
void __fastcall TStdDataForm::FilterOnRadioGroupClick(TObject *Sender) {

	FilterOnLabel->Caption = "Records where " +
		FilterOnRadioGroup->Items->Strings[FilterOnRadioGroup->ItemIndex] + " >=";
	switch (FilterOnRadioGroup->ItemIndex) {
	case 0:
		Orders->OnFilterRecord = OrdersFilterOnDate;
		FilterCriteria->Text = DateToStr(FLastDate);
		break;
	case 1:
		Orders->OnFilterRecord = OrdersFilterOnAmount;
		FilterCriteria->Text = FloatToStr(FLastAmount);
		break;
	}
	ActiveControl = FilterCriteria;
}

开发者ID:SkylineNando，项目名称:Delphi，代码行数:17，代码来源:GdsData.cpp

示例16: switch

//---------------------------------------------------------------------------
void __fastcall TFormSummaryRep::ShowHighFooter(TDataSet *DataSet)
{
	TDBGridColumnsEh* Columns;
	switch (DataSet->Tag) {
		case 1: Columns = DBGridEh1->Columns;
				  for (int i = 1; i < 14; i++) {
					  Columns->Items[i]->Footers->Items[0]->Value = FloatToStr(Sum1[i]);
				  }
				  break;
		case 2: Columns = DBGridEh2->Columns;
				  for (int i = 2; i < 41; i++) {
					  Columns->Items[i]->Footers->Items[0]->Value = IntToStr(Sum2[i]);
				  }
				  break;
	}
}

开发者ID:viv1958，项目名称:Transport，代码行数:17，代码来源:FrmSummaryRep.cpp

示例17: IntToStr

//---------------------------------------------------------------------------
void __fastcall TfrmProximityForm::DoReadRSSI(TObject *Sender, int ARssiValue, TBluetoothGattStatus *AGattStatus)
{
	int LRatioDB;
	double LRatioLinear, LDistance;
  //Discard wrong values
  if (ARssiValue > 0) return;

  lblTxPower->Text = IntToStr(FTxPowerValue);
  lblRSSI->Text = IntToStr(ARssiValue) + ' dBm';
  LRatioDB = FTxPowerValue - ARssiValue;
  LRatioLinear = pow(10, LRatioDB / 10);
  LDistance = Sqrt(LRatioLinear);

  lblDistance->Text = FloatToStr(LDistance);
  lblDist2->Text = IntToStr(FTxPowerValue - ARssiValue);

  CheckDistanceThreshold(FTxPowerValue - ARssiValue);
}

开发者ID:FMXExpress，项目名称:Firemonkey，代码行数:19，代码来源:ProxClient.cpp

示例18: int

void __fastcall TfrmPropVisor::FormActivate(TObject *Sender)
{
  chkEjex->Checked = dsgPrevia->ShowAxeX;
  chkEjey->Checked = dsgPrevia->ShowAxeY;
  txtEjeXNombre->Text = dsgPrevia->NameAxeX;
  txtEjeYNombre->Text = dsgPrevia->NameAxeY;
  cboDirEjeX->ItemIndex = (dsgPrevia->DirectionAxeX == drLeftToRight)? 0 : 1;
  cboDirEjeY->ItemIndex = (dsgPrevia->DirectionAxeY == drBottomToTop)? 0 : 1;
  cbxColorEjeX->Selected = dsgPrevia->AxeX->Color;
  cbxColorEjeY->Selected = dsgPrevia->AxeY->Color;
  cboEstiloX->ItemIndex = int(dsgPrevia->AxeX->Style);
  cboEstiloY->ItemIndex = int(dsgPrevia->AxeY->Style);
  edtGrosorX->Value = dsgPrevia->AxeX->Width;
  edtGrosorY->Value = dsgPrevia->AxeY->Width;
  chkMostrarPuntero->Checked = dsgPrevia->ShowPointer;
  cbxFondo->Selected = dsgPrevia->BackGround->Color;
  chkEjexClick(Sender);
  chkEjeyClick(Sender);
  chkNumX->Checked = dsgPrevia->ShowLabelsAxeX;
  chkNumY->Checked = dsgPrevia->ShowLabelsAxeY;
  edtLabelStepX->Text = FloatToStr(dsgPrevia->LabelsStepX);
  edtLabelStepY->Text = FloatToStr(dsgPrevia->LabelsStepY);
  edtAddTextX->Text = dsgPrevia->AdditionalStringAxeX;
  edtAddTextY->Text = dsgPrevia->AdditionalStringAxeY;
  chkSobreX->Checked = dsgPrevia->LabelsToTheTopOfAxeX;
  chkDerY->Checked = dsgPrevia->LabelsToTheRigthOfAxeY;
  chkNumYClick(Sender);
  chkNumYClick(Sender);
  chkMarksX->Checked = dsgPrevia->ShowMarksAxeX;
  chkMarksY->Checked = dsgPrevia->ShowMarksAxeY;
  edtMarksStepX->Text = FloatToStr(dsgPrevia->MarksStepX);
  edtMarksStepY->Text = FloatToStr(dsgPrevia->MarksStepY);
  edtMarksLongX->Text = IntToStr(dsgPrevia->MarksLengthAxeX);
  edtMarksLongY->Text = IntToStr(dsgPrevia->MarksLengthAxeY);
  chkMarksXClick(Sender);
  chkMarksYClick(Sender);
  chkGridX->Checked = dsgPrevia->ShowGridX;
  chkGridY->Checked = dsgPrevia->ShowGridY;
  edtPasoGridX->Text = FloatToStr(dsgPrevia->GridStepX);
  edtPasoGridY->Text = FloatToStr(dsgPrevia->GridStepY);
  cboStyleGridX->ItemIndex = int(dsgPrevia->GridX->Style);
  cboStyleGridY->ItemIndex = int(dsgPrevia->GridY->Style);
  edtWidthGridX->Text = IntToStr(dsgPrevia->GridX->Width);
  edtWidthGridY->Text = IntToStr(dsgPrevia->GridY->Width);
  cboColorGridX->Selected = dsgPrevia->GridX->Color;
  cboColorGridY->Selected = dsgPrevia->GridY->Color;
  chkGridXClick(Sender);
  chkGridYClick(Sender);
  edtZoomX->Text = IntToStr(dsgPrevia->ZoomAxeX);
  edtZoomY->Text = IntToStr(dsgPrevia->ZoomAxeY);
}

开发者ID:clubdesarrolladores，项目名称:maxmath，代码行数:51，代码来源:fPropVisor.cpp

示例19: checkVoltage

void checkVoltage() {
   unsigned int tmp_volt = 0;
   float voltage;

   tmp_volt = ADC_Read(VOLT_CH);

   a_volt  = (a_volt + tmp_volt) >> 1;
   voltage = a_volt * 4;
   voltage = voltage / 1000;
   voltage = voltage * 4.191;

   if (a_volt != last_avolt){
      last_avolt = a_volt;
      FloatToStr(voltage, tmpString);
      memcpy(VOLT_STR, tmpString, 4);
      rx_lcdFlag     = 1;
      voltageFlag = 0;
   }
}

开发者ID:hobbypcb，项目名称:hardrock-50，代码行数:19，代码来源:functions.c

示例20: TIniFile

//---------------------------------------------------------------------------
void __fastcall TForm1::FormShow(TObject *Sender)
{
   // подключаем базу

   TIniFile *ini;
   ini = new TIniFile(".\\biz.ini");

    s=0;


   IBDatabase1->DatabaseName=ini->ReadString("server","name","\\combibone\d:\Project1\Progz\FINAL\KNPP.GDB");
   manag=ini->ReadString("server","user","SYSDBA");
   IBDatabase1->Params->Add("User_Name="+ini->ReadString("server","user","SYSDBA"));


  try
   {
     IBDatabase1->Open();

     Form1->IBQuery1->Open();
     Form1->IBQuery1->First();

    while(!IBQuery1->Eof)
      {
        s=s+IBQuery1->FieldByName("summ")->AsFloat;
        IBQuery1->Next();

      };

    StatusBar1->Panels->Items[1]->Text=FloatToStr(s);
    Form1->IBQuery1->First();

 }
  catch(...)
   {
        // если пароль не верный то выход
     ShowMessage("Не верный пароль или логин ");
     Application->Terminate();
   }


}

开发者ID:bizba，项目名称:doc-firm，代码行数:43，代码来源:Unit1.cpp

注：本文中的FloatToStr函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FlowGetProtoMapping函数代码示例发布时间：2022-05-30

C++ FloatTime函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19177|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9987|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9655|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8622|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ FloatToStr函数代码示例

示例1: BSlider

示例2: switch

示例3: StrToFloatDef

示例4: StrToIntDef

示例5: GlobalMemoryStatus

示例6: StrToFloat

示例7: fopen

示例8: get_matr

示例9: FloatToStr

示例10: StrToFloat

示例11: BTextControl

示例12: CalculateSigma

示例13: rgb2hsv

示例14: imprimirValor

示例15: switch

示例16: switch

示例17: IntToStr

示例18: int

示例19: checkVoltage

示例20: TIniFile

请发表评论

全部评论

上一篇：

下一篇：

matlab破解教程密钥

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053