C++ FUNC函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FUNC函数的典型用法代码示例。如果您正苦于以下问题：C++ FUNC函数的具体用法？C++ FUNC怎么用？C++ FUNC使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FUNC函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DRIVER_INIT_MEMBER

DRIVER_INIT_MEMBER(gstriker_state,vgoalsoc)
{
    m_gametype = 3;
    mcu_init();

    m_maincpu->space(AS_PROGRAM).install_write_handler(0x200090, 0x200091, write16_delegate(FUNC(gstriker_state::vbl_toggle_w),this)); // vblank toggle
    m_maincpu->space(AS_PROGRAM).install_read_handler(0x200090, 0x200091, read16_delegate(FUNC(gstriker_state::vbl_toggle_r),this));
}

开发者ID:j26w，项目名称:mame，代码行数:8，代码来源:gstriker.c

示例2: map

void bwidow_state::bwidow_map(address_map &map)
{
	map(0x0000, 0x07ff).ram();
	map(0x2000, 0x27ff).ram().share("vectorram").region("maincpu", 0x2000);
	map(0x2800, 0x5fff).rom();
	map(0x6000, 0x67ff).rw("pokey1", FUNC(pokey_device::read), FUNC(pokey_device::write));
	map(0x6800, 0x6fff).rw("pokey2", FUNC(pokey_device::read), FUNC(pokey_device::write));
	map(0x7000, 0x7000).r(FUNC(bwidow_state::earom_read));
	map(0x7800, 0x7800).portr("IN0");
	map(0x8000, 0x8000).portr("IN3");
	map(0x8800, 0x8800).portr("IN4");
	map(0x8800, 0x8800).w(FUNC(bwidow_state::bwidow_misc_w)); /* coin counters, leds */
	map(0x8840, 0x8840).w("avg", FUNC(avg_device::go_w));
	map(0x8880, 0x8880).w("avg", FUNC(avg_device::reset_w));
	map(0x88c0, 0x88c0).w(FUNC(bwidow_state::irq_ack_w)); /* interrupt acknowledge */
	map(0x8900, 0x8900).w(FUNC(bwidow_state::earom_control_w));
	map(0x8940, 0x897f).w(FUNC(bwidow_state::earom_write));
	map(0x8980, 0x89ed).nopw(); /* watchdog clear */
	map(0x9000, 0xffff).rom();
}

开发者ID:Octocontrabass，项目名称:mame，代码行数:20，代码来源:bwidow.cpp

示例3: auto_alloc_array

void esripsys_state::video_start()
{
	struct line_buffer_t *line_buffer = m_line_buffer;
	int i;

	/* Allocate memory for the two 512-pixel line buffers */
	line_buffer[0].colour_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[0].intensity_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[0].priority_buf = auto_alloc_array(machine(), UINT8, 512);

	line_buffer[1].colour_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[1].intensity_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[1].priority_buf = auto_alloc_array(machine(), UINT8, 512);

	/* Create and initialise the HBLANK timers */
	m_hblank_start_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(esripsys_state::hblank_start_callback),this));
	m_hblank_end_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(esripsys_state::hblank_end_callback),this));
	m_hblank_start_timer->adjust(m_screen->time_until_pos(0, ESRIPSYS_HBLANK_START));

	/* Create the sprite scaling table */
	m_scale_table = auto_alloc_array(machine(), UINT8, 64 * 64);

	for (i = 0; i < 64; ++i)
	{
		int j;

		for (j = 1; j < 65; ++j)
		{
			int p0 = 0;
			int p1 = 0;
			int p2 = 0;
			int p3 = 0;
			int p4 = 0;
			int p5 = 0;

			if (i & 0x1)
				p0 = BIT(j, 5) && !BIT(j, 4) && !BIT(j,3) && !BIT(j, 2) && !BIT(j, 1) && !BIT(j, 0);
			if (i & 0x2)
				p1 = BIT(j, 4) && !BIT(j, 3) && !BIT(j, 2) && !BIT(j, 1) && !BIT(j, 0);
			if (i & 0x4)
				p2 = BIT(j,3) && !BIT(j, 2) && !BIT(j, 1) && !BIT(j, 0);
			if (i & 0x8)
				p3 = BIT(j, 2) && !BIT(j,1) && !BIT(j,0);
			if (i & 0x10)
				p4 = BIT(j, 1) && !BIT(j, 0);
			if (i & 0x20)
				p5 = BIT(j, 0);

			m_scale_table[i * 64 + j - 1] = p0 | p1 | p2 | p3 | p4 | p5;
		}
	}

	/* Now create a lookup table for scaling the sprite 'fig' value */
	m_fig_scale_table = auto_alloc_array(machine(), UINT8, 1024 * 64);

	for (i = 0; i < 1024; ++i)
	{
		int scale;

		for (scale = 0; scale < 64; ++scale)
		{
			int input_pixels = i + 1;
			int scaled_pixels = 0;

			while (input_pixels)
			{
				if (m_scale_table[scale * 64 + (scaled_pixels & 0x3f)] == 0)
					input_pixels--;

				scaled_pixels++;
			}

			m_fig_scale_table[i * 64 + scale] = scaled_pixels - 1;
		}
	}

	/* Register stuff for state saving */
	save_pointer(NAME(line_buffer[0].colour_buf), 512);
	save_pointer(NAME(line_buffer[0].intensity_buf), 512);
	save_pointer(NAME(line_buffer[0].priority_buf), 512);

	save_pointer(NAME(line_buffer[1].colour_buf), 512);
	save_pointer(NAME(line_buffer[1].intensity_buf), 512);
	save_pointer(NAME(line_buffer[1].priority_buf), 512);

	save_item(NAME(m_video_firq));
	save_item(NAME(m_bg_intensity));
	save_item(NAME(m_hblank));
	save_item(NAME(m_video_firq_en));
	save_item(NAME(m_frame_vbl));
	save_item(NAME(m_12sel));
}

开发者ID:dinkc64，项目名称:mame，代码行数:92，代码来源:esripsys.c

示例4: tilemap_get_info_delegate

void cischeat_state::create_tilemaps()
{
	int layer, i;

	for (layer = 0; layer < 3; layer++)
	{
		/* 16x16 tilemaps */
		m_tilemap[layer][0][0] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 16, TILES_PER_PAGE_Y * 2);
		m_tilemap[layer][0][1] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 8, TILES_PER_PAGE_Y * 4);
		m_tilemap[layer][0][2] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 4, TILES_PER_PAGE_Y * 8);
		m_tilemap[layer][0][3] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 2, TILES_PER_PAGE_Y * 16);

		/* 8x8 tilemaps */
		m_tilemap[layer][1][0] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 8, TILES_PER_PAGE_Y * 1);
		m_tilemap[layer][1][1] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 4, TILES_PER_PAGE_Y * 2);
		m_tilemap[layer][1][2] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 4, TILES_PER_PAGE_Y * 2);
		m_tilemap[layer][1][3] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 2, TILES_PER_PAGE_Y * 4);

		/* set user data and transparency */
		for (i = 0; i < 8; i++)
		{
			m_tilemap[layer][i/4][i%4]->set_user_data((void *)(FPTR)layer);
			m_tilemap[layer][i/4][i%4]->set_transparent_pen(15);
		}
	}
}

开发者ID:dinkc64，项目名称:mame，代码行数:34，代码来源:cischeat.c

示例5: map

void aic6250_device::map(address_map &map)
{
	map(0x0, 0x0).rw(FUNC(aic6250_device::dma_count_l_r), FUNC(aic6250_device::dma_count_l_w));
	map(0x1, 0x1).rw(FUNC(aic6250_device::dma_count_m_r), FUNC(aic6250_device::dma_count_m_w));
	map(0x2, 0x2).rw(FUNC(aic6250_device::dma_count_h_r), FUNC(aic6250_device::dma_count_h_w));
	map(0x3, 0x3).w(FUNC(aic6250_device::int_msk_reg_0_w));
	map(0x4, 0x4).w(FUNC(aic6250_device::offset_cntrl_w));
	map(0x5, 0x5).rw(FUNC(aic6250_device::fifo_status_r), FUNC(aic6250_device::dma_cntrl_w));
	map(0x6, 0x6).rw(FUNC(aic6250_device::rev_cntrl_r), FUNC(aic6250_device::int_msk_reg_1_w));
	map(0x7, 0x7).rw(FUNC(aic6250_device::status_reg_0_r), FUNC(aic6250_device::control_reg_0_w));
	map(0x8, 0x8).rw(FUNC(aic6250_device::status_reg_1_r), FUNC(aic6250_device::control_reg_1_w));
	map(0x9, 0x9).rw(FUNC(aic6250_device::scsi_signal_reg_r), FUNC(aic6250_device::scsi_signal_reg_w));
	map(0xa, 0xa).rw(FUNC(aic6250_device::scsi_id_data_r), FUNC(aic6250_device::scsi_id_data_w));
	map(0xb, 0xb).r(FUNC(aic6250_device::source_dest_id_r));
	map(0xc, 0xc).rw(FUNC(aic6250_device::memory_data_r), FUNC(aic6250_device::memory_data_w));
	map(0xd, 0xd).rw(FUNC(aic6250_device::port_a_r), FUNC(aic6250_device::port_a_w));
	map(0xe, 0xe).rw(FUNC(aic6250_device::port_b_r), FUNC(aic6250_device::port_b_w));
	map(0xf, 0xf).rw(FUNC(aic6250_device::scsi_latch_data_r), FUNC(aic6250_device::scsi_bsy_rst_w));
}

开发者ID:rfka01，项目名称:mame，代码行数:19，代码来源:aic6250.cpp

示例6: poly_free

/******************************************************************/

void galastrm_state::galastrm_exit()
{
	poly_free(m_poly);
}

void galastrm_state::video_start()
{
	m_spritelist = auto_alloc_array(machine(), struct gs_tempsprite, 0x4000);

	m_screen->register_screen_bitmap(m_tmpbitmaps);
	m_screen->register_screen_bitmap(m_polybitmap);

	m_poly = poly_alloc(machine(), 16, sizeof(gs_poly_extra_data), POLYFLAG_ALLOW_QUADS);
	machine().add_notifier(MACHINE_NOTIFY_EXIT, machine_notify_delegate(FUNC(galastrm_state::galastrm_exit), this));
}

/************************************************************
            SPRITE DRAW ROUTINES

We draw a series of small tiles ("chunks") together to
create each big sprite. The spritemap rom provides the lookup
table for this. The game hardware looks up 16x16 sprite chunks
from the spritemap rom, creating a 64x64 sprite like this:

     0  1  2  3
     4  5  6  7
     8  9 10 11
    12 13 14 15

开发者ID:gbraad，项目名称:mame，代码行数:30，代码来源:galastrm.c

示例7: FUNC

    int quot, rem; \
} div_t; \
\
typedef struct { \
    int quot, rem; \
} ldiv_t; \
";
#endif

#define MIN_OPT_LEVEL 2
#include "rodefs.h"

/* all stdlib.h functions */
const PICOC_REG_TYPE StdlibFunctions[] = {
#ifndef NO_FP
    { FUNC(StdlibAtof),           PROTO("float atof(char *);") },
    { FUNC(StdlibStrtod),         PROTO("float strtod(char *,char **);") },
#endif
    { FUNC(StdlibAtoi),           PROTO("int atoi(char *);") },
    { FUNC(StdlibAtol),           PROTO("int atol(char *);") },
    { FUNC(StdlibStrtol),         PROTO("int strtol(char *,char **,int);") },
    { FUNC(StdlibStrtoul),        PROTO("int strtoul(char *,char **,int);") },
    { FUNC(StdlibMalloc),         PROTO("void *malloc(int);") },
    { FUNC(StdlibCalloc),         PROTO("void *calloc(int,int);") },
    { FUNC(StdlibRealloc),        PROTO("void *realloc(void *,int);") },
    { FUNC(StdlibFree),           PROTO("void free(void *);") },
    { FUNC(StdlibRand),           PROTO("int rand();") },
    { FUNC(StdlibSrand),          PROTO("void srand(int);") },
    { FUNC(StdlibAbort),          PROTO("void abort();") },
    { FUNC(StdlibExit),           PROTO("void exit(int);") },
    { FUNC(StdlibGetenv),         PROTO("char *getenv(char *);") },

开发者ID:fjrti，项目名称:remix，代码行数:31，代码来源:stdlib.c

示例8: MCFG_SCREEN_VISIBLE_AREA

	MCFG_SCREEN_VISIBLE_AREA(0, 640-1, 0, 480-1)
	MCFG_SCREEN_UPDATE_DEVICE("crtc", sy6545_1_device, screen_update)
	MCFG_PALETTE_ADD_MONOCHROME("palette")
	MCFG_DEVICE_ADD("gfxdecode", GFXDECODE, "palette", gfx_v6809)

	/* sound hardware */
	SPEAKER(config, "mono").front_center();
	MCFG_DEVICE_ADD("speaker", SPEAKER_SOUND)
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.50)

	/* devices */
	SY6545_1(config, m_crtc, 16_MHz_XTAL / 8);
	m_crtc->set_screen("screen");
	m_crtc->set_show_border_area(false);
	m_crtc->set_char_width(8);
	m_crtc->set_update_row_callback(FUNC(v6809_state::crtc_update_row), this);
	m_crtc->set_on_update_addr_change_callback(FUNC(v6809_state::crtc_update_addr), this);

	generic_keyboard_device &keyboard(GENERIC_KEYBOARD(config, "keyboard", 0));
	keyboard.set_keyboard_callback(FUNC(v6809_state::kbd_put));

// port A = drive select and 2 control lines ; port B = keyboard
// CB2 connects to the interrupt pin of the RTC (the rtc code doesn't support it)
	PIA6821(config, m_pia0, 0);
	m_pia0->readpb_handler().set(FUNC(v6809_state::pb_r));
	m_pia0->writepa_handler().set(FUNC(v6809_state::pa_w));
	m_pia0->irqa_handler().set_inputline("maincpu", M6809_IRQ_LINE);
	m_pia0->irqb_handler().set_inputline("maincpu", M6809_IRQ_LINE);

// no idea what this does
	pia6821_device &pia1(PIA6821(config, "pia1", 0));

开发者ID:Octocontrabass，项目名称:mame，代码行数:31，代码来源:v6809.cpp

示例9: assert

void sdl_osd_interface::init(running_machine &machine)
{
	// call our parent
	osd_interface::init(machine);

	sdl_options &options = downcast<sdl_options &>(machine.options());
	const char *stemp;

	// determine if we are benchmarking, and adjust options appropriately
	int bench = options.bench();
	astring error_string;
	if (bench > 0)
	{
		options.set_value(OPTION_THROTTLE, false, OPTION_PRIORITY_MAXIMUM, error_string);
		options.set_value(OPTION_SOUND, false, OPTION_PRIORITY_MAXIMUM, error_string);
		options.set_value(SDLOPTION_VIDEO, "none", OPTION_PRIORITY_MAXIMUM, error_string);
		options.set_value(OPTION_SECONDS_TO_RUN, bench, OPTION_PRIORITY_MAXIMUM, error_string);
		assert(!error_string);
	}

	// Some driver options - must be before audio init!
	stemp = options.audio_driver();
	if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
	{
		mame_printf_verbose("Setting SDL audiodriver '%s' ...\n", stemp);
		osd_setenv(SDLENV_AUDIODRIVER, stemp, 1);
	}

	stemp = options.video_driver();
	if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
	{
		mame_printf_verbose("Setting SDL videodriver '%s' ...\n", stemp);
		osd_setenv(SDLENV_VIDEODRIVER, stemp, 1);
	}

#if (SDLMAME_SDL2)
		stemp = options.render_driver();
		if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
		{
			mame_printf_verbose("Setting SDL renderdriver '%s' ...\n", stemp);
			//osd_setenv(SDLENV_RENDERDRIVER, stemp, 1);
			SDL_SetHint(SDL_HINT_RENDER_DRIVER, stemp);
		}
#endif

	/* Set the SDL environment variable for drivers wanting to load the
	 * lib at startup.
	 */
#if USE_OPENGL
	/* FIXME: move lib loading code from drawogl.c here */

	stemp = options.gl_lib();
	if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
	{
		osd_setenv("SDL_VIDEO_GL_DRIVER", stemp, 1);
		mame_printf_verbose("Setting SDL_VIDEO_GL_DRIVER = '%s' ...\n", stemp);
	}
#endif

	/* get number of processors */
	stemp = options.numprocessors();

	osd_num_processors = 0;

	if (strcmp(stemp, "auto") != 0)
	{
		osd_num_processors = atoi(stemp);
		if (osd_num_processors < 1)
		{
			mame_printf_warning("Warning: numprocessors < 1 doesn't make much sense. Assuming auto ...\n");
			osd_num_processors = 0;
		}
	}

	/* Initialize SDL */

	if (!SDLMAME_INIT_IN_WORKER_THREAD)
	{
#if (SDLMAME_SDL2)
		if (SDL_InitSubSystem(SDL_INIT_TIMER|SDL_INIT_AUDIO| SDL_INIT_VIDEO| SDL_INIT_JOYSTICK|SDL_INIT_NOPARACHUTE)) {
#else
		if (SDL_Init(SDL_INIT_TIMER|SDL_INIT_AUDIO| SDL_INIT_VIDEO| SDL_INIT_JOYSTICK|SDL_INIT_NOPARACHUTE)) {
#endif
			mame_printf_error("Could not initialize SDL %s\n", SDL_GetError());
			exit(-1);
		}
		osd_sdl_info();
	}
	// must be before sdlvideo_init!
	machine.add_notifier(MACHINE_NOTIFY_EXIT, machine_notify_delegate(FUNC(osd_exit), &machine));

	defines_verbose();

	if (!SDLMAME_HAS_DEBUGGER)
		if (machine.debug_flags & DEBUG_FLAG_OSD_ENABLED)
		{
			mame_printf_error("sdlmame: -debug not supported on X11-less builds\n\n");
			osd_exit(machine);
			exit(-1);
		}
//.........这里部分代码省略.........

开发者ID:felipesanches，项目名称:ume，代码行数:101，代码来源:sdlmain.c

示例10: video_start

void bsktball_state::video_start()
{
	m_bg_tilemap = &machine().tilemap().create(tilemap_get_info_delegate(FUNC(bsktball_state::get_bg_tile_info),this), TILEMAP_SCAN_ROWS, 8, 8, 32, 32);
}

开发者ID:coinhelper，项目名称:jsmess，代码行数:4，代码来源:bsktball.c

示例11: FUNC

bool Cacheable::validate(Session *s)
{
	FUNC("Cacheable::validate()");
	
	// Return true if the object is already valid
	if (isValid())
		return true;
	
	// Set the mode to first search locally, then search remote
	s->setCacheMode(Session::LOCAL_THEN_REMOTE);
	
	// Construct the match info for this object's issuer
	acl::MatchInfo mi;
	getIssuerInfo(mi);
	
	// Find this object's issuer (clearance cert)
	CCList *pCCList = s->getCC(mi);
	if (pCCList == NULL)
    {
        char lpszBuf[2048];
        strcpy(lpszBuf, "Issuer not found");
        if (mi.getSubjectDN())
        {
            strcat(lpszBuf, ", ");
            strcat(lpszBuf, *mi.getSubjectDN());
        }
		throw ACL_EXCEPT(ACL_AC_VAL_ERROR, lpszBuf);
    }       // END IF pCCList (no issuer(s))
	
	// Create auto_ptr to automatically free the list
	std::auto_ptr<CCList> apCCList(pCCList);
	
	// If more than one issuer is returned, throw an exception
	if (pCCList->size() > 1)
    {
		char errorBuf[1024];
        strcpy(errorBuf, "Multiple issuers found");
        if (mi.getSubjectDN())
        {
            strcat(errorBuf, ", ");
            strcat(errorBuf, *mi.getSubjectDN());
        }
		throw ACL_EXCEPT(ACL_AC_VAL_ERROR, errorBuf);
    }
	
	// Validate the issuer's clearance cert
	CML::ValidatedKey validKey;
    CML::ErrorInfoList Errors;

	CML::CertPath certPath(pCCList->front().getEncodedCC(), false);
	short cml_status = certPath.BuildAndValidate(s->getCMLHandle(),
        CM_SEARCH_UNTIL_FOUND, &Errors, 0, &validKey);
	if (cml_status != CM_NO_ERROR)
	{
		char errorBuf[1024];
		sprintf(errorBuf, "Issuer failed to validate: CML error %d: %s",
			cml_status, CMU_GetErrorString(cml_status));
        if (mi.getSubjectDN())
        {
            strcat(errorBuf, ", ");
            strcat(errorBuf, *mi.getSubjectDN());
        }
		throw ACL_EXCEPT(ACL_VAL_ERROR, errorBuf);
	}
	
	// Perform any object specific path validation logic first
	vPathRules(s, certPath.base());
	
	// Validate the object
	return validate(s, validKey.pubKeyInfo());
}

开发者ID:dcblake，项目名称:SMP，代码行数:71，代码来源:aclcacheable.cpp

示例12: strcat

				if (phoneme == 0x03 || phoneme == 0x3e) strcat(phonemes," ");
				else strcat(phonemes,PhonemeTable[phoneme]);
			}

			mame_printf_debug("Votrax played '%s'\n", phonemes);
			play_sample(samples, phonemes);
#if 0
			popmessage("%s", phonemes);
#endif
		}

		state->m_votrax_queuepos = 0;
	}

	/* generate a NMI after a while to make the CPU continue to send data */
	space->machine().scheduler().timer_set(attotime::from_usec(50), FUNC(gottlieb_nmi_generate));
}

static WRITE8_HANDLER( speech_clock_dac_w )
{
	gottlieb_state *state = space->machine().driver_data<gottlieb_state>();
if (data != state->m_last)
	mame_printf_debug("clock = %02X\n", data);
state->m_last = data;
}


/*************************************
 *
 *  Rev 1. initialization
 *

开发者ID:bdidier，项目名称:MAME-OS-X，代码行数:31，代码来源:gottlieb.c

示例13: map

void konendev_state::konendev_map(address_map &map)
{
	map(0x00000000, 0x00ffffff).ram();
	map(0x78000000, 0x78000003).r(FUNC(konendev_state::mcu2_r));
	map(0x78080000, 0x7808000f).rw(FUNC(konendev_state::rtc_r), FUNC(konendev_state::rtc_w));
	map(0x780c0000, 0x780c0003).rw(FUNC(konendev_state::sound_data_r), FUNC(konendev_state::sound_data_w));
	map(0x78100000, 0x78100003).w(FUNC(konendev_state::eeprom_w));
	map(0x78800000, 0x78800003).r(FUNC(konendev_state::ifu2_r));
	map(0x78800004, 0x78800007).r(FUNC(konendev_state::ctrl0_r));
	map(0x78a00000, 0x78a0001f).r(FUNC(konendev_state::ctrl1_r));
	map(0x78e00000, 0x78e00003).r(FUNC(konendev_state::ctrl2_r));
	map(0x79000000, 0x79000003).w(m_gcu, FUNC(k057714_device::fifo_w));
	map(0x79800000, 0x798000ff).rw(m_gcu, FUNC(k057714_device::read), FUNC(k057714_device::write));
	map(0x7a000000, 0x7a01ffff).ram().share("nvram0");
	map(0x7a100000, 0x7a11ffff).ram().share("nvram1");
	map(0x7e000000, 0x7f7fffff).rom().region("flash", 0);
	map(0x7ff00000, 0x7fffffff).rom().region("program", 0);
}

开发者ID:SailorSat，项目名称:cabmame，代码行数:18，代码来源:konendev.cpp

示例14: map

void v6809_state::v6809_mem(address_map &map)
{
	map.unmap_value_high();
	map(0x0000, 0xefff).ram();
	map(0xf000, 0xf000).mirror(0xfe).r(m_crtc, FUNC(mc6845_device::status_r)).w(FUNC(v6809_state::v6809_address_w));
	map(0xf001, 0xf001).mirror(0xfe).r(m_crtc, FUNC(mc6845_device::register_r)).w(FUNC(v6809_state::v6809_register_w));
	map(0xf200, 0xf200).mirror(0xff).w(FUNC(v6809_state::videoram_w));
	map(0xf500, 0xf501).mirror(0x36).rw("acia0", FUNC(acia6850_device::read), FUNC(acia6850_device::write)); // modem
	map(0xf508, 0xf509).mirror(0x36).rw("acia1", FUNC(acia6850_device::read), FUNC(acia6850_device::write)); // printer
	map(0xf600, 0xf603).mirror(0x3c).rw(m_fdc, FUNC(mb8876_device::read), FUNC(mb8876_device::write));
	map(0xf640, 0xf64f).mirror(0x30).rw("rtc", FUNC(mm58274c_device::read), FUNC(mm58274c_device::write));
	map(0xf680, 0xf683).mirror(0x3c).rw(m_pia0, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0xf6c0, 0xf6c7).mirror(0x08).rw("ptm", FUNC(ptm6840_device::read), FUNC(ptm6840_device::write));
	map(0xf6d0, 0xf6d3).mirror(0x0c).rw("pia1", FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0xf800, 0xffff).rom();
}

开发者ID:Octocontrabass，项目名称:mame，代码行数:16，代码来源:v6809.cpp

示例15: DRIVER_INIT_MEMBER

DRIVER_INIT_MEMBER(exprraid_state,wexpressb3)
{
	m_maincpu->space(AS_PROGRAM).install_read_handler(0xFFC0, 0xFFC0, read8_delegate(FUNC(exprraid_state::vblank_r),this));
	exprraid_gfx_expand();
}

开发者ID:jiangzhonghui，项目名称:mame，代码行数:5，代码来源:exprraid.c

示例16: map

void allied_state::allied_map(address_map &map)
{
	map(0x0000, 0x003f).ram(); // ic6
	map(0x0044, 0x0047).rw(m_ic2, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0x0048, 0x004b).rw(m_ic1, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0x0050, 0x0053).rw(m_ic7, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0x0060, 0x0063).rw(m_ic4, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0x0080, 0x008f).rw(m_ic5, FUNC(mos6530_device::read), FUNC(mos6530_device::write));
	map(0x0840, 0x084f).rw(m_ic6, FUNC(mos6530_device::read), FUNC(mos6530_device::write));
	map(0x00c0, 0x00c3).rw(m_ic8, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0x0100, 0x013f).ram(); // ic5
	map(0x1400, 0x1fff).rom();
}

开发者ID:RafTacker，项目名称:mame，代码行数:13，代码来源:allied.cpp

示例17: FUNC

int
listener::auth(int client_sock, 
	uid_t 		*uid_out, 
	gid_t 		*gid_out, 
	char 		*complete_name, int namelen
#ifdef USE_KRB
	,
	unsigned long ttime, // time ticket issued
	C_Block		*sessionkey
#endif
)
{
	FUNC(listener::auth);
	c_uid_t 			uid;
	int				remoteness=::same_process;


#ifdef DEBUG
	dumpaddrs(client_sock, "listener::run");
#endif
	(void) max_sock_opt(client_sock, SO_RCVBUF);

	get_remoteness(client_sock, remoteness);

#ifdef USE_KRB
	{
	// KERBEROS AUTHENTICATION
	/* specific to RPC 4.0 */ /* grot */
	int             krb_status;
	KTEXT_ST        ticket;
	AUTH_DAT        auth_data;
	char			version[20];
	Key_schedule    sched;
	INSTANCE		inst;
	struct sockaddr_in peer, me;

	// instance = '*' means authenticator will fill it in.
	memset(inst, '\0', sizeof(inst)); 
	inst[0] = '*';

#	ifdef MUTUAL
#	define kopt	KOPT_DO_MUTUAL
#	else
#	define kopt	0
#	endif

	krb_status = krb_recvauth(kopt, client_sock,
		&ticket, "rcmd", inst, &peer, &me, &auth_data,
		"" /* use /etc/srvtab */,  sched, version);

	if(krb_status != KSUCCESS) {
		ShoreVasLayer.client_service->log->log(log_error, 
		 "Kerberos error %s ", (char *)krb_err_txt[krb_status]);
		return ::error_remoteness;
	}

	// who's it from?
	uid = (c_uid_t) SVAS_OK;

	if (krb_kntoln(&auth_data, complete_name) != KSUCCESS) {
		strcpy(complete_name, "*No local name returned by krb_kntoln*");
		ShoreVasLayer.client_service->log->log(log_error, 
		 "Kerberos error %s ", (char *)krb_err_txt[krb_status]);
		return ::error_remoteness;
	}

#	ifdef DEBUG
	// print the info filled in by krb
	DBG(
		<< "KRB connect: version " << version  << "client krb-connect OK"
	)
#	endif 

	dassert(strcmp(auth_data.pname,complete_name)==0);
	}
	ttime = auth_data.time_sec, 
	*sessionkey = auth_data.session;
#else
	// NO KERBEROS: just read name and return uid
	{
		int cc; 

		if( (cc = ::read(client_sock, complete_name, namelen)) <0) {
			// TODO: Shouldn't this use log instead of perror?
			perror("read login complete_name");
			return ::error_remoteness;
		}
		complete_name[cc]='\0';
	}
#endif /* NO KERBEROS */

	{
		*uid_out = uid = uname2uid(complete_name, gid_out);
		if(uid==BAD_UID) {
			DBG(<<"NO SUCH USER!");
			ShoreVasLayer.client_service->
				log->log(log_error, "Authentication error: no such user: %s", complete_name);
			
			return ::error_remoteness;
		}
//.........这里部分代码省略.........

开发者ID:glycerine，项目名称:shore-mt，代码行数:101，代码来源:tcp_clients.C

示例18: EEPROM_93C46_16BIT

void  model1io_device::device_add_mconfig(machine_config &config)
{
	z80_device &iocpu(Z80(config, "iocpu", 32_MHz_XTAL/8));
	iocpu.set_addrmap(AS_PROGRAM, &model1io_device::mem_map);

	EEPROM_93C46_16BIT(config, m_eeprom); // 93C45

	sega_315_5338a_device &io(SEGA_315_5338A(config, "io", 32_MHz_XTAL));
	io.read_callback().set(FUNC(model1io_device::io_r));
	io.write_callback().set(FUNC(model1io_device::io_w));
	io.out_pa_callback().set(FUNC(model1io_device::io_pa_w));
	io.in_pb_callback().set(FUNC(model1io_device::io_pb_r));
	io.in_pc_callback().set(FUNC(model1io_device::io_pc_r));
	io.in_pd_callback().set(FUNC(model1io_device::io_pd_r));
	io.in_pe_callback().set(FUNC(model1io_device::io_pe_r));
	io.out_pe_callback().set(FUNC(model1io_device::io_pe_w));
	io.out_pf_callback().set(FUNC(model1io_device::io_pf_w));
	io.in_pg_callback().set(FUNC(model1io_device::io_pg_r));

	msm6253_device &adc(MSM6253(config, "adc", 0));
	adc.set_input_cb<0>(FUNC(model1io_device::analog0_r));
	adc.set_input_cb<1>(FUNC(model1io_device::analog1_r));
	adc.set_input_cb<2>(FUNC(model1io_device::analog2_r));
	adc.set_input_cb<3>(FUNC(model1io_device::analog3_r));
}

开发者ID:SailorSat，项目名称:cabmame，代码行数:25，代码来源:model1io.cpp

示例19: video_start

void chanbara_state::video_start()
{
	m_bg_tilemap = &machine().tilemap().create(tilemap_get_info_delegate(FUNC(chanbara_state::get_bg_tile_info),this), TILEMAP_SCAN_ROWS,8, 8, 32, 32);
	m_bg2_tilemap = &machine().tilemap().create(tilemap_get_info_delegate(FUNC(chanbara_state::get_bg2_tile_info),this), TILEMAP_SCAN_ROWS,16, 16, 16, 32);
	m_bg_tilemap->set_transparent_pen(0);
}

开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:6，代码来源:chanbara.c

示例20: tilemap_get_info_delegate

void aquarius_state::video_start()
{
	m_tilemap = &machine().tilemap().create(*m_gfxdecode, tilemap_get_info_delegate(FUNC(aquarius_state::aquarius_gettileinfo),this), TILEMAP_SCAN_ROWS, 8, 8, 40, 25);
}

开发者ID:MASHinfo，项目名称:mame，代码行数:4，代码来源:aquarius.cpp

注：本文中的FUNC函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FUNCTION函数代码示例发布时间：2022-05-30

C++ FUIAction函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19172|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9985|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8324|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8694|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8637|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9654|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8621|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7997|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7534|2022-11-06

客服电话

电子邮件

C++ FUNC函数代码示例

示例1: DRIVER_INIT_MEMBER

示例2: map

示例3: auto_alloc_array

示例4: tilemap_get_info_delegate

示例5: map

示例6: poly_free

示例7: FUNC

示例8: MCFG_SCREEN_VISIBLE_AREA

示例9: assert

示例10: video_start

示例11: FUNC

示例12: strcat

示例13: map

示例14: map

示例15: DRIVER_INIT_MEMBER

示例16: map

示例17: FUNC

示例18: EEPROM_93C46_16BIT

示例19: video_start

示例20: tilemap_get_info_delegate

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

CVE-2022-33655

zendesk/android-floating-action-button:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053