本文整理汇总了C++中FT_TRACE4函数的典型用法代码示例。如果您正苦于以下问题：C++ FT_TRACE4函数的具体用法？C++ FT_TRACE4怎么用？C++ FT_TRACE4使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了FT_TRACE4函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: pcf_read_TOC
//.........这里部分代码省略.........
tables[i] = tables[i + 1];
tables[i + 1] = tmp;
have_change = 1;
}
if ( ( tables[i].size > tables[i + 1].offset ) ||
( tables[i].offset > tables[i + 1].offset - tables[i].size ) )
{
error = FT_THROW( Invalid_Offset );
goto Exit;
}
}
if ( !have_change )
break;
}
/*
* We now check whether the `size' and `offset' values are reasonable:
* `offset' + `size' must not exceed the stream size.
*
* Note, however, that X11's `pcfWriteFont' routine (used by the
* `bdftopcf' program to create PDF font files) has two special
* features.
*
* - It always assigns the accelerator table a size of 100 bytes in the
* TOC, regardless of its real size, which can vary between 34 and 72
* bytes.
*
* - Due to the way the routine is designed, it ships out the last font
* table with its real size, ignoring the TOC's size value. Since
* the TOC size values are always rounded up to a multiple of 4, the
* difference can be up to three bytes for all tables except the
* accelerator table, for which the difference can be as large as 66
* bytes.
*
*/
tables = face->toc.tables;
size = stream->size;
for ( n = 0; n < toc->count - 1; n++ )
{
/* we need two checks to avoid overflow */
if ( ( tables->size > size ) ||
( tables->offset > size - tables->size ) )
{
error = FT_THROW( Invalid_Table );
goto Exit;
}
tables++;
}
/* only check `tables->offset' for last table element ... */
if ( ( tables->offset > size ) )
{
error = FT_THROW( Invalid_Table );
goto Exit;
}
/* ... and adjust `tables->size' to the real value if necessary */
if ( tables->size > size - tables->offset )
tables->size = size - tables->offset;
#ifdef FT_DEBUG_LEVEL_TRACE
{
FT_UInt i, j;
const char* name = "?";
FT_TRACE4(( "pcf_read_TOC:\n" ));
FT_TRACE4(( " number of tables: %ld\n", face->toc.count ));
tables = face->toc.tables;
for ( i = 0; i < toc->count; i++ )
{
for ( j = 0; j < sizeof ( tableNames ) / sizeof ( tableNames[0] );
j++ )
if ( tables[i].type == (FT_UInt)( 1 << j ) )
name = tableNames[j];
FT_TRACE4(( " %d: type=%s, format=0x%X, "
"size=%ld (0x%lX), offset=%ld (0x%lX)\n",
i, name,
tables[i].format,
tables[i].size, tables[i].size,
tables[i].offset, tables[i].offset ));
}
}
#endif
return FT_Err_Ok;
Exit:
FT_FREE( face->toc.tables );
return error;
}
开发者ID:structuresound，项目名称:freetype，代码行数:101，代码来源:pcfread.c
示例2: T1_Decoder_Parse_Charstrings
//.........这里部分代码省略.........
{
FT_ERROR(( "T1_Decoder_Parse_Charstrings: " ));
FT_ERROR(( "unexpected EOF in integer\n" ));
goto Syntax_Error;
}
if ( ip[-2] < 251 )
value = ( ( (FT_Long)ip[-2] - 247 ) << 8 ) + ip[-1] + 108;
else
value = -( ( ( (FT_Long)ip[-2] - 251 ) << 8 ) + ip[-1] + 108 );
}
}
else
{
FT_ERROR(( "T1_Decoder_Parse_Charstrings: "
"invalid byte (%d)\n", ip[-1] ));
goto Syntax_Error;
}
}
/*********************************************************************/
/* */
/* Push value on stack, or process operator */
/* */
/* */
if ( op == op_none )
{
if ( top - decoder->stack >= T1_MAX_CHARSTRINGS_OPERANDS )
{
FT_ERROR(( "T1_Decoder_Parse_Charstrings: stack overflow!\n" ));
goto Syntax_Error;
}
FT_TRACE4(( " %ld", value ));
*top++ = value;
decoder->top = top;
}
else if ( op == op_callothersubr ) /* callothersubr */
{
FT_TRACE4(( " callothersubr" ));
if ( top - decoder->stack < 2 )
goto Stack_Underflow;
top -= 2;
switch ( top[1] )
{
case 1: /* start flex feature */
if ( top[0] != 0 )
goto Unexpected_OtherSubr;
decoder->flex_state = 1;
decoder->num_flex_vectors = 0;
if ( start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Memory_Error;
break;
case 2: /* add flex vectors */
{
FT_Int idx;
if ( top[0] != 0 )
goto Unexpected_OtherSubr;
开发者ID:Claruarius，项目名称:stblinux-2.6.37，代码行数:67，代码来源:t1decode.c
示例3: pcf_get_properties
static FT_Error
pcf_get_properties( FT_Stream stream,
PCF_Face face )
{
PCF_ParseProperty props = 0;
PCF_Property properties = 0;
FT_Int nprops, i;
FT_ULong format, size;
FT_Error error;
FT_Memory memory = FT_FACE(face)->memory;
FT_ULong string_size;
FT_String* strings = 0;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_PROPERTIES,
&format,
&size );
if ( error )
goto Bail;
if ( FT_READ_ULONG_LE( format ) )
goto Bail;
FT_TRACE4(( "get_prop: format = %ld\n", format ));
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
goto Bail;
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( nprops );
else
(void)FT_READ_ULONG_LE( nprops );
if ( error )
goto Bail;
FT_TRACE4(( "get_prop: nprop = %d\n", nprops ));
if ( FT_NEW_ARRAY( props, nprops ) )
goto Bail;
for ( i = 0; i < nprops; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
{
if ( FT_STREAM_READ_FIELDS( pcf_property_msb_header, props + i ) )
goto Bail;
}
else
{
if ( FT_STREAM_READ_FIELDS( pcf_property_header, props + i ) )
goto Bail;
}
}
/* pad the property array */
/* */
/* clever here - nprops is the same as the number of odd-units read, */
/* as only isStringProp are odd length (Keith Packard) */
/* */
if ( nprops & 3 )
{
i = 4 - ( nprops & 3 );
FT_Stream_Skip( stream, i );
}
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( string_size );
else
(void)FT_READ_ULONG_LE( string_size );
if ( error )
goto Bail;
FT_TRACE4(( "get_prop: string_size = %ld\n", string_size ));
if ( FT_NEW_ARRAY( strings, string_size ) )
goto Bail;
error = FT_Stream_Read( stream, (FT_Byte*)strings, string_size );
if ( error )
goto Bail;
if ( FT_NEW_ARRAY( properties, nprops ) )
goto Bail;
for ( i = 0; i < nprops; i++ )
{
/* XXX: make atom */
if ( FT_NEW_ARRAY( properties[i].name,
ft_strlen( strings + props[i].name ) + 1 ) )
goto Bail;
ft_strcpy( properties[i].name,strings + props[i].name );
properties[i].isString = props[i].isString;
if ( props[i].isString )
{
if ( FT_NEW_ARRAY( properties[i].value.atom,
//.........这里部分代码省略.........
开发者ID:stefanhendriks，项目名称:dune2themaker，代码行数:101，代码来源:pcfread.c
示例4: cff_subfont_load
static FT_Error
cff_subfont_load( CFF_SubFont font,
CFF_Index idx,
FT_UInt font_index,
FT_Stream stream,
FT_ULong base_offset,
FT_Library library )
{
FT_Error error;
CFF_ParserRec parser;
FT_Byte* dict = NULL;
FT_ULong dict_len;
CFF_FontRecDict top = &font->font_dict;
CFF_Private priv = &font->private_dict;
cff_parser_init( &parser, CFF_CODE_TOPDICT, &font->font_dict, library );
/* set defaults */
FT_MEM_ZERO( top, sizeof ( *top ) );
top->underline_position = -( 100L << 16 );
top->underline_thickness = 50L << 16;
top->charstring_type = 2;
top->font_matrix.xx = 0x10000L;
top->font_matrix.yy = 0x10000L;
top->cid_count = 8720;
/* we use the implementation specific SID value 0xFFFF to indicate */
/* missing entries */
top->version = 0xFFFFU;
top->notice = 0xFFFFU;
top->copyright = 0xFFFFU;
top->full_name = 0xFFFFU;
top->family_name = 0xFFFFU;
top->weight = 0xFFFFU;
top->embedded_postscript = 0xFFFFU;
top->cid_registry = 0xFFFFU;
top->cid_ordering = 0xFFFFU;
top->cid_font_name = 0xFFFFU;
error = cff_index_access_element( idx, font_index, &dict, &dict_len );
if ( !error )
{
FT_TRACE4(( " top dictionary:\n" ));
error = cff_parser_run( &parser, dict, dict + dict_len );
}
cff_index_forget_element( idx, &dict );
if ( error )
goto Exit;
/* if it is a CID font, we stop there */
if ( top->cid_registry != 0xFFFFU )
goto Exit;
/* parse the private dictionary, if any */
if ( top->private_offset && top->private_size )
{
/* set defaults */
FT_MEM_ZERO( priv, sizeof ( *priv ) );
priv->blue_shift = 7;
priv->blue_fuzz = 1;
priv->lenIV = -1;
priv->expansion_factor = (FT_Fixed)( 0.06 * 0x10000L );
priv->blue_scale = (FT_Fixed)( 0.039625 * 0x10000L * 1000 );
cff_parser_init( &parser, CFF_CODE_PRIVATE, priv, library );
if ( FT_STREAM_SEEK( base_offset + font->font_dict.private_offset ) ||
FT_FRAME_ENTER( font->font_dict.private_size ) )
goto Exit;
FT_TRACE4(( " private dictionary:\n" ));
error = cff_parser_run( &parser,
(FT_Byte*)stream->cursor,
(FT_Byte*)stream->limit );
FT_FRAME_EXIT();
if ( error )
goto Exit;
/* ensure that `num_blue_values' is even */
priv->num_blue_values &= ~1;
}
/* read the local subrs, if any */
if ( priv->local_subrs_offset )
{
if ( FT_STREAM_SEEK( base_offset + top->private_offset +
priv->local_subrs_offset ) )
goto Exit;
error = cff_index_init( &font->local_subrs_index, stream, 1 );
if ( error )
goto Exit;
error = cff_index_get_pointers( &font->local_subrs_index,
//.........这里部分代码省略.........
开发者ID:Johnny-Martin，项目名称:ComBase，代码行数:101，代码来源:cffload.c
示例5: cid_load_glyph
cid_load_glyph( T1_Decoder decoder,
FT_UInt glyph_index )
{
CID_Face face = (CID_Face)decoder->builder.face;
CID_FaceInfo cid = &face->cid;
FT_Byte* p;
FT_UInt fd_select;
FT_Stream stream = face->cid_stream;
FT_Error error = CID_Err_Ok;
FT_Byte* charstring = 0;
FT_Memory memory = face->root.memory;
FT_ULong glyph_length = 0;
PSAux_Service psaux = (PSAux_Service)face->psaux;
#ifdef FT_CONFIG_OPTION_INCREMENTAL
FT_Incremental_InterfaceRec *inc =
face->root.internal->incremental_interface;
#endif
FT_TRACE4(( "cid_load_glyph: glyph index %d\n", glyph_index ));
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* For incremental fonts get the character data using */
/* the callback function. */
if ( inc )
{
FT_Data glyph_data;
error = inc->funcs->get_glyph_data( inc->object,
glyph_index, &glyph_data );
if ( error )
goto Exit;
p = (FT_Byte*)glyph_data.pointer;
fd_select = (FT_UInt)cid_get_offset( &p, (FT_Byte)cid->fd_bytes );
if ( glyph_data.length != 0 )
{
glyph_length = glyph_data.length - cid->fd_bytes;
(void)FT_ALLOC( charstring, glyph_length );
if ( !error )
ft_memcpy( charstring, glyph_data.pointer + cid->fd_bytes,
glyph_length );
}
inc->funcs->free_glyph_data( inc->object, &glyph_data );
if ( error )
goto Exit;
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
/* For ordinary fonts read the CID font dictionary index */
/* and charstring offset from the CIDMap. */
{
FT_UInt entry_len = cid->fd_bytes + cid->gd_bytes;
FT_ULong off1;
if ( FT_STREAM_SEEK( cid->data_offset + cid->cidmap_offset +
glyph_index * entry_len ) ||
FT_FRAME_ENTER( 2 * entry_len ) )
goto Exit;
p = (FT_Byte*)stream->cursor;
fd_select = (FT_UInt) cid_get_offset( &p, (FT_Byte)cid->fd_bytes );
off1 = (FT_ULong)cid_get_offset( &p, (FT_Byte)cid->gd_bytes );
p += cid->fd_bytes;
glyph_length = cid_get_offset( &p, (FT_Byte)cid->gd_bytes ) - off1;
FT_FRAME_EXIT();
if ( fd_select >= (FT_UInt)cid->num_dicts )
{
error = CID_Err_Invalid_Offset;
goto Exit;
}
if ( glyph_length == 0 )
goto Exit;
if ( FT_ALLOC( charstring, glyph_length ) )
goto Exit;
if ( FT_STREAM_READ_AT( cid->data_offset + off1,
charstring, glyph_length ) )
goto Exit;
}
/* Now set up the subrs array and parse the charstrings. */
{
CID_FaceDict dict;
CID_Subrs cid_subrs = face->subrs + fd_select;
FT_Int cs_offset;
/* Set up subrs */
decoder->num_subrs = cid_subrs->num_subrs;
//.........这里部分代码省略.........
开发者ID:0302zq，项目名称:libgdx，代码行数:101，代码来源:cidgload.c
示例6: pfr_face_init
pfr_face_init( FT_Stream stream,
FT_Face pfrface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
PFR_Face face = (PFR_Face)pfrface;
FT_Error error;
FT_UNUSED( num_params );
FT_UNUSED( params );
/* load the header and check it */
error = pfr_header_load( &face->header, stream );
if ( error )
goto Exit;
if ( !pfr_header_check( &face->header ) )
{
FT_TRACE4(( "pfr_face_init: not a valid PFR font\n" ));
error = PFR_Err_Unknown_File_Format;
goto Exit;
}
/* check face index */
{
FT_UInt num_faces;
error = pfr_log_font_count( stream,
face->header.log_dir_offset,
&num_faces );
if ( error )
goto Exit;
pfrface->num_faces = num_faces;
}
if ( face_index < 0 )
goto Exit;
if ( face_index >= pfrface->num_faces )
{
FT_ERROR(( "pfr_face_init: invalid face index\n" ));
error = PFR_Err_Invalid_Argument;
goto Exit;
}
/* load the face */
error = pfr_log_font_load(
&face->log_font, stream, face_index,
face->header.log_dir_offset,
FT_BOOL( face->header.phy_font_max_size_high != 0 ) );
if ( error )
goto Exit;
/* now load the physical font descriptor */
error = pfr_phy_font_load( &face->phy_font, stream,
face->log_font.phys_offset,
face->log_font.phys_size );
if ( error )
goto Exit;
/* now, set-up all root face fields */
{
PFR_PhyFont phy_font = &face->phy_font;
pfrface->face_index = face_index;
pfrface->num_glyphs = phy_font->num_chars;
pfrface->face_flags = FT_FACE_FLAG_SCALABLE;
if ( (phy_font->flags & PFR_PHY_PROPORTIONAL) == 0 )
pfrface->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
if ( phy_font->flags & PFR_PHY_VERTICAL )
pfrface->face_flags |= FT_FACE_FLAG_VERTICAL;
else
pfrface->face_flags |= FT_FACE_FLAG_HORIZONTAL;
if ( phy_font->num_strikes > 0 )
pfrface->face_flags |= FT_FACE_FLAG_FIXED_SIZES;
if ( phy_font->num_kern_pairs > 0 )
pfrface->face_flags |= FT_FACE_FLAG_KERNING;
/* If no family name was found in the "undocumented" auxiliary
* data, use the font ID instead. This sucks but is better than
* nothing.
*/
pfrface->family_name = phy_font->family_name;
if ( pfrface->family_name == NULL )
pfrface->family_name = phy_font->font_id;
/* note that the style name can be NULL in certain PFR fonts,
* probably meaning "Regular"
*/
pfrface->style_name = phy_font->style_name;
//.........这里部分代码省略.........
开发者ID:Bracket-，项目名称:psp-ports，代码行数:101，代码来源:pfrobjs.c
示例7: pcf_get_properties
static FT_Error
pcf_get_properties( FT_Stream stream,
PCF_Face face )
{
PCF_ParseProperty props = 0;
PCF_Property properties = NULL;
FT_ULong nprops, i;
FT_ULong format, size;
FT_Error error;
FT_Memory memory = FT_FACE(face)->memory;
FT_ULong string_size;
FT_String* strings = 0;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_PROPERTIES,
&format,
&size );
if ( error )
goto Bail;
if ( FT_READ_ULONG_LE( format ) )
goto Bail;
FT_TRACE4(( "pcf_get_properties:\n" ));
FT_TRACE4(( " format = %ld\n", format ));
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
goto Bail;
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( nprops );
else
(void)FT_READ_ULONG_LE( nprops );
if ( error )
goto Bail;
FT_TRACE4(( " nprop = %d (truncate %d props)\n",
(int)nprops, nprops - (int)nprops ));
nprops = (int)nprops;
/* rough estimate */
if ( nprops > size / PCF_PROPERTY_SIZE )
{
error = PCF_Err_Invalid_Table;
goto Bail;
}
face->nprops = (int)nprops;
if ( FT_NEW_ARRAY( props, nprops ) )
goto Bail;
for ( i = 0; i < nprops; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
{
if ( FT_STREAM_READ_FIELDS( pcf_property_msb_header, props + i ) )
goto Bail;
}
else
{
if ( FT_STREAM_READ_FIELDS( pcf_property_header, props + i ) )
goto Bail;
}
}
/* pad the property array */
/* */
/* clever here - nprops is the same as the number of odd-units read, */
/* as only isStringProp are odd length (Keith Packard) */
/* */
if ( nprops & 3 )
{
i = 4 - ( nprops & 3 );
if ( FT_STREAM_SKIP( i ) )
{
error = PCF_Err_Invalid_Stream_Skip;
goto Bail;
}
}
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( string_size );
else
(void)FT_READ_ULONG_LE( string_size );
if ( error )
goto Bail;
FT_TRACE4(( " string_size = %ld\n", string_size ));
/* rough estimate */
if ( string_size > size - nprops * PCF_PROPERTY_SIZE )
{
error = PCF_Err_Invalid_Table;
goto Bail;
//.........这里部分代码省略.........
开发者ID:151706061，项目名称:VTK，代码行数:101，代码来源:pcfread.c
示例8: pcf_get_metrics
static FT_Error
pcf_get_metrics( FT_Stream stream,
PCF_Face face )
{
FT_Error error = PCF_Err_Ok;
FT_Memory memory = FT_FACE(face)->memory;
FT_ULong format, size;
PCF_Metric metrics = 0;
FT_ULong nmetrics, i;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_METRICS,
&format,
&size );
if ( error )
return error;
if ( FT_READ_ULONG_LE( format ) )
goto Bail;
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) &&
!PCF_FORMAT_MATCH( format, PCF_COMPRESSED_METRICS ) )
return PCF_Err_Invalid_File_Format;
if ( PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( nmetrics );
else
(void)FT_READ_ULONG_LE( nmetrics );
}
else
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_USHORT( nmetrics );
else
(void)FT_READ_USHORT_LE( nmetrics );
}
if ( error )
return PCF_Err_Invalid_File_Format;
face->nmetrics = nmetrics;
if ( !nmetrics )
return PCF_Err_Invalid_Table;
FT_TRACE4(( "pcf_get_metrics:\n" ));
FT_TRACE4(( " number of metrics: %d\n", nmetrics ));
/* rough estimate */
if ( PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
{
if ( nmetrics > size / PCF_METRIC_SIZE )
return PCF_Err_Invalid_Table;
}
else
{
if ( nmetrics > size / PCF_COMPRESSED_METRIC_SIZE )
return PCF_Err_Invalid_Table;
}
if ( FT_NEW_ARRAY( face->metrics, nmetrics ) )
return PCF_Err_Out_Of_Memory;
metrics = face->metrics;
for ( i = 0; i < nmetrics; i++ )
{
error = pcf_get_metric( stream, format, metrics + i );
metrics[i].bits = 0;
FT_TRACE5(( " idx %d: width=%d, "
"lsb=%d, rsb=%d, ascent=%d, descent=%d, swidth=%d\n",
i,
( metrics + i )->characterWidth,
( metrics + i )->leftSideBearing,
( metrics + i )->rightSideBearing,
( metrics + i )->ascent,
( metrics + i )->descent,
( metrics + i )->attributes ));
if ( error )
break;
}
if ( error )
FT_FREE( face->metrics );
Bail:
return error;
}
开发者ID:151706061，项目名称:VTK，代码行数:95，代码来源:pcfread.c
示例9: pcf_get_bitmaps
static FT_Error
pcf_get_bitmaps( FT_Stream stream,
PCF_Face face )
{
FT_Error error;
FT_Memory memory = FT_FACE( face )->memory;
FT_Long* offsets = NULL;
FT_Long bitmapSizes[GLYPHPADOPTIONS];
FT_ULong format, size;
FT_ULong nbitmaps, i, sizebitmaps = 0;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_BITMAPS,
&format,
&size );
if ( error )
return error;
error = FT_Stream_EnterFrame( stream, 8 );
if ( error )
return error;
format = FT_GET_ULONG_LE();
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
nbitmaps = FT_GET_ULONG();
else
nbitmaps = FT_GET_ULONG_LE();
FT_Stream_ExitFrame( stream );
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
return FT_THROW( Invalid_File_Format );
FT_TRACE4(( "pcf_get_bitmaps:\n" ));
FT_TRACE4(( " number of bitmaps: %d\n", nbitmaps ));
/* XXX: PCF_Face->nmetrics is singed FT_Long, see pcf.h */
if ( face->nmetrics < 0 || nbitmaps != ( FT_ULong )face->nmetrics )
return FT_THROW( Invalid_File_Format );
if ( FT_NEW_ARRAY( offsets, nbitmaps ) )
return error;
for ( i = 0; i < nbitmaps; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_LONG( offsets[i] );
else
(void)FT_READ_LONG_LE( offsets[i] );
FT_TRACE5(( " bitmap %d: offset %ld (0x%lX)\n",
i, offsets[i], offsets[i] ));
}
if ( error )
goto Bail;
for ( i = 0; i < GLYPHPADOPTIONS; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_LONG( bitmapSizes[i] );
else
(void)FT_READ_LONG_LE( bitmapSizes[i] );
if ( error )
goto Bail;
sizebitmaps = bitmapSizes[PCF_GLYPH_PAD_INDEX( format )];
FT_TRACE4(( " padding %d implies a size of %ld\n", i, bitmapSizes[i] ));
}
FT_TRACE4(( " %d bitmaps, padding index %ld\n",
nbitmaps,
PCF_GLYPH_PAD_INDEX( format ) ));
FT_TRACE4(( " bitmap size = %d\n", sizebitmaps ));
FT_UNUSED( sizebitmaps ); /* only used for debugging */
for ( i = 0; i < nbitmaps; i++ )
{
/* rough estimate */
if ( ( offsets[i] < 0 ) ||
( (FT_ULong)offsets[i] > size ) )
{
FT_TRACE0(( "pcf_get_bitmaps:"
" invalid offset to bitmap data of glyph %d\n", i ));
}
else
face->metrics[i].bits = stream->pos + offsets[i];
}
face->bitmapsFormat = format;
Bail:
FT_FREE( offsets );
return error;
}
开发者ID:ONLYOFFICE，项目名称:core，代码行数:100，代码来源:pcfread.c
示例10: pcf_get_encodings
static FT_Error
pcf_get_encodings( FT_Stream stream,
PCF_Face face )
{
FT_Error error;
FT_Memory memory = FT_FACE( face )->memory;
FT_ULong format, size;
int firstCol, lastCol;
int firstRow, lastRow;
int nencoding, encodingOffset;
int i, j, k;
PCF_Encoding encoding = NULL;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_BDF_ENCODINGS,
&format,
&size );
if ( error )
return error;
error = FT_Stream_EnterFrame( stream, 14 );
if ( error )
return error;
format = FT_GET_ULONG_LE();
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
{
firstCol = FT_GET_SHORT();
lastCol = FT_GET_SHORT();
firstRow = FT_GET_SHORT();
lastRow = FT_GET_SHORT();
face->defaultChar = FT_GET_SHORT();
}
else
{
firstCol = FT_GET_SHORT_LE();
lastCol = FT_GET_SHORT_LE();
firstRow = FT_GET_SHORT_LE();
lastRow = FT_GET_SHORT_LE();
face->defaultChar = FT_GET_SHORT_LE();
}
FT_Stream_ExitFrame( stream );
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
return FT_THROW( Invalid_File_Format );
FT_TRACE4(( "pdf_get_encodings:\n" ));
FT_TRACE4(( " firstCol %d, lastCol %d, firstRow %d, lastRow %d\n",
firstCol, lastCol, firstRow, lastRow ));
nencoding = ( lastCol - firstCol + 1 ) * ( lastRow - firstRow + 1 );
if ( FT_NEW_ARRAY( encoding, nencoding ) )
return FT_THROW( Out_Of_Memory );
error = FT_Stream_EnterFrame( stream, 2 * nencoding );
if ( error )
goto Bail;
k = 0;
for ( i = firstRow; i <= lastRow; i++ )
{
for ( j = firstCol; j <= lastCol; j++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
encodingOffset = FT_GET_SHORT();
else
encodingOffset = FT_GET_SHORT_LE();
if ( encodingOffset != -1 )
{
encoding[k].enc = i * 256 + j;
encoding[k].glyph = (FT_Short)encodingOffset;
FT_TRACE5(( " code %d (0x%04X): idx %d\n",
encoding[k].enc, encoding[k].enc, encoding[k].glyph ));
k++;
}
}
}
FT_Stream_ExitFrame( stream );
if ( FT_RENEW_ARRAY( encoding, nencoding, k ) )
goto Bail;
face->nencodings = k;
face->encodings = encoding;
return error;
Bail:
FT_FREE( encoding );
return error;
//.........这里部分代码省略.........
开发者ID:ONLYOFFICE，项目名称:core，代码行数:101，代码来源:pcfread.c
示例11: af_face_globals_compute_style_coverage
//.........这里部分代码省略.........
break;
if ( gindex < (FT_ULong)globals->glyph_count &&
( gstyles[gindex] & AF_STYLE_MASK ) == (FT_UShort)ss )
gstyles[gindex] |= AF_NONBASE;
}
}
}
else
{
/* get glyphs not directly addressable by cmap */
af_shaper_get_coverage( globals, style_class, gstyles, 0 );
}
}
/* handle the remaining default OpenType features ... */
for ( ss = 0; AF_STYLE_CLASSES_GET[ss]; ss++ )
{
AF_StyleClass style_class = AF_STYLE_CLASSES_GET[ss];
if ( style_class->coverage == AF_COVERAGE_DEFAULT )
af_shaper_get_coverage( globals, style_class, gstyles, 0 );
}
/* ... and finally the default OpenType features of the default script */
af_shaper_get_coverage( globals, AF_STYLE_CLASSES_GET[dflt], gstyles, 1 );
/* mark ASCII digits */
for ( i = 0x30; i <= 0x39; i++ )
{
FT_UInt gindex = FT_Get_Char_Index( face, i );
if ( gindex != 0 && gindex < (FT_ULong)globals->glyph_count )
gstyles[gindex] |= AF_DIGIT;
}
Exit:
/*
* By default, all uncovered glyphs are set to the fallback style.
* XXX: Shouldn't we disable hinting or do something similar?
*/
if ( globals->module->fallback_style != AF_STYLE_UNASSIGNED )
{
FT_Long nn;
for ( nn = 0; nn < globals->glyph_count; nn++ )
{
if ( ( gstyles[nn] & AF_STYLE_MASK ) == AF_STYLE_UNASSIGNED )
{
gstyles[nn] &= ~AF_STYLE_MASK;
gstyles[nn] |= globals->module->fallback_style;
}
}
}
#ifdef FT_DEBUG_LEVEL_TRACE
FT_TRACE4(( "\n"
"style coverage\n"
"==============\n"
"\n" ));
for ( ss = 0; AF_STYLE_CLASSES_GET[ss]; ss++ )
{
AF_StyleClass style_class = AF_STYLE_CLASSES_GET[ss];
FT_UInt count = 0;
FT_Long idx;
FT_TRACE4(( "%s:\n", af_style_names[style_class->style] ));
for ( idx = 0; idx < globals->glyph_count; idx++ )
{
if ( ( gstyles[idx] & AF_STYLE_MASK ) == style_class->style )
{
if ( !( count % 10 ) )
FT_TRACE4(( " " ));
FT_TRACE4(( " %d", idx ));
count++;
if ( !( count % 10 ) )
FT_TRACE4(( "\n" ));
}
}
if ( !count )
FT_TRACE4(( " (none)\n" ));
if ( count % 10 )
FT_TRACE4(( "\n" ));
}
#endif /* FT_DEBUG_LEVEL_TRACE */
FT_Set_Charmap( face, old_charmap );
return error;
}
开发者ID:AaronNGray，项目名称:texlive-libs，代码行数:101，代码来源:afglobal.c
示例12: otv_GDEF_validate
//.........这里部分代码省略.........
otvalid->root = ftvalid;
FT_TRACE3(( "validating GDEF table\n" ));
OTV_INIT;
OTV_LIMIT_CHECK( 4 );
if ( FT_NEXT_USHORT( p ) != 1 ) /* majorVersion */
FT_INVALID_FORMAT;
version = FT_NEXT_USHORT( p ); /* minorVersion */
table_size = 10;
switch ( version )
{
case 0:
/* MarkAttachClassDef has been added to the OpenType */
/* specification without increasing GDEF's version, */
/* so we use this ugly hack to find out whether the */
/* table is needed actually. */
need_MarkAttachClassDef = FT_BOOL(
otv_GSUBGPOS_have_MarkAttachmentType_flag( gsub ) ||
otv_GSUBGPOS_have_MarkAttachmentType_flag( gpos ) );
if ( need_MarkAttachClassDef )
{
OTV_LIMIT_CHECK( 8 );
table_size += 2;
}
else
OTV_LIMIT_CHECK( 6 ); /* OpenType < 1.2 */
break;
case 2:
OTV_LIMIT_CHECK( 10 );
table_size += 4;
break;
case 3:
OTV_LIMIT_CHECK( 14 );
table_size += 8;
break;
default:
FT_INVALID_FORMAT;
}
otvalid->glyph_count = glyph_count;
OTV_OPTIONAL_OFFSET( GlyphClassDef );
OTV_SIZE_CHECK( GlyphClassDef );
if ( GlyphClassDef )
otv_ClassDef_validate( table + GlyphClassDef, otvalid );
OTV_OPTIONAL_OFFSET( AttachListOffset );
OTV_SIZE_CHECK( AttachListOffset );
if ( AttachListOffset )
{
OTV_NEST2( AttachList, AttachPoint );
OTV_RUN( table + AttachListOffset, otvalid );
}
OTV_OPTIONAL_OFFSET( LigCaretListOffset );
OTV_SIZE_CHECK( LigCaretListOffset );
if ( LigCaretListOffset )
{
OTV_NEST3( LigCaretList, LigGlyph, CaretValue );
OTV_RUN( table + LigCaretListOffset, otvalid );
}
if ( need_MarkAttachClassDef )
{
OTV_OPTIONAL_OFFSET( MarkAttachClassDef );
OTV_SIZE_CHECK( MarkAttachClassDef );
if ( MarkAttachClassDef )
otv_ClassDef_validate( table + MarkAttachClassDef, otvalid );
}
if ( version > 0 )
{
OTV_OPTIONAL_OFFSET( MarkGlyphSetsDef );
OTV_SIZE_CHECK( MarkGlyphSetsDef );
if ( MarkGlyphSetsDef )
otv_MarkGlyphSets_validate( table + MarkGlyphSetsDef, otvalid );
}
if ( version > 2 )
{
OTV_OPTIONAL_OFFSET32( itemVarStore );
OTV_SIZE_CHECK32( itemVarStore );
if ( itemVarStore )
OTV_TRACE(( " [omitting itemVarStore validation]\n" )); /* XXX */
}
FT_TRACE4(( "\n" ));
}
开发者ID:ImageMagick，项目名称:ttf，代码行数:101，代码来源:otvgdef.c
示例13: otv_BASE_validate
otv_BASE_validate( FT_Bytes table,
FT_Validator ftvalid )
{
OTV_ValidatorRec otvalidrec;
OTV_Validator otvalid = &otvalidrec;
FT_Bytes p = table;
FT_UInt table_size;
FT_UShort version;
OTV_OPTIONAL_TABLE( HorizAxis );
OTV_OPTIONAL_TABLE( VertAxis );
OTV_OPTIONAL_TABLE32( itemVarStore );
otvalid->root = ftvalid;
FT_TRACE3(( "validating BASE table\n" ));
OTV_INIT;
OTV_LIMIT_CHECK( 4 );
if ( FT_NEXT_USHORT( p ) != 1 ) /* majorVersion */
FT_INVALID_FORMAT;
version = FT_NEXT_USHORT( p ); /* minorVersion */
table_size = 8;
switch ( version )
{
case 0:
OTV_LIMIT_CHECK( 4 );
break;
case 1:
OTV_LIMIT_CHECK( 8 );
table_size += 4;
break;
default:
FT_INVALID_FORMAT;
}
OTV_OPTIONAL_OFFSET( HorizAxis );
OTV_SIZE_CHECK( HorizAxis );
if ( HorizAxis )
otv_Axis_validate( table + HorizAxis, otvalid );
OTV_OPTIONAL_OFFSET( VertAxis );
OTV_SIZE_CHECK( VertAxis );
if ( VertAxis )
otv_Axis_validate( table + VertAxis, otvalid );
if ( version > 0 )
{
OTV_OPTIONAL_OFFSET32( itemVarStore );
OTV_SIZE_CHECK32( itemVarStore );
if ( itemVarStore )
OTV_TRACE(( " [omitting itemVarStore validation]\n" )); /* XXX */
}
FT_TRACE4(( "\n" ));
}
开发者ID:GWRon，项目名称:pub.mod-NG，代码行数:63，代码来源:otvbase.c
示例14: tt_size_run_fpgm
tt_size_run_fpgm( TT_Size size,
FT_Bool pedantic )
{
TT_Face face = (TT_Face)size->root.face;
TT_ExecContext exec;
FT_Error error;
exec = size->context;
error = TT_Load_Context( exec, face, size );
if ( error )
return error;
exec->callTop = 0;
exec->top = 0;
exec->period = 64;
exec->phase = 0;
exec->threshold = 0;
exec->instruction_trap = FALSE;
exec->F_dot_P = 0x4000L;
exec->pedantic_hinting = pedantic;
{
FT_Size_Metrics* size_metrics = &exec->metrics;
TT_Size_Metrics* tt_metrics = &exec->tt_metrics;
size_metrics->x_ppem = 0;
size_metrics->y_ppem = 0;
size_metrics->x_scale = 0;
size_metrics->y_scale = 0;
tt_metrics->ppem = 0;
tt_metrics->scale = 0;
tt_metrics->ratio = 0x10000L;
}
/* allow font program execution */
TT_Set_CodeRange( exec,
tt_coderange_font,
face->font_program,
(FT_Long)face->font_program_size );
/* disable CVT and glyph programs coderange */
TT_Clear_CodeRange( exec, tt_coderange_cvt );
TT_Clear_CodeRange( exec, tt_coderange_glyph );
if ( face->font_program_size > 0 )
{
TT_Goto_CodeRange( exec, tt_coderange_font, 0 );
FT_TRACE4(( "Executing `fpgm' table.\n" ));
error = face->interpreter( exec );
#ifdef FT_DEBUG_LEVEL_TRACE
if ( error )
FT_TRACE4(( " interpretation failed with error code 0x%x\n",
error ));
#endif
}
else
error = FT_Err_Ok;
size->bytecode_ready = error;
if ( !error )
TT_Save_Context( exec, size );
return error;
}
开发者ID:CCExtractor，项目名称:ccextractor，代码行数:73，代码来源:ttobjs.c
示例15: pcf_read_TOC
static FT_Error
pcf_read_TOC( FT_Stream stream,
PCF_Face face )
{
FT_Error error;
PCF_Toc toc = &face->toc;
PCF_Table tables;
FT_Memory memory = FT_FACE(face)->memory;
FT_UInt n;
if ( FT_STREAM_SEEK ( 0 ) ||
FT_STREAM_READ_FIELDS ( pcf_toc_header, toc ) )
return PCF_Err_Cannot_Open_Resource;
if ( toc->version != PCF_FILE_VERSION ||
toc->count > FT_ARRAY_MAX( face->toc.tables ) ||
toc->count == 0 )
return PCF_Err_Invalid_File_Format;
if ( FT_NEW_ARRAY( face->toc.tables, toc->count ) )
return PCF_Err_Out_Of_Memory;
tables = face->toc.tables;
for ( n = 0; n < toc->count; n++ )
{
if ( FT_STREAM_READ_FIELDS( pcf_table_header, tables ) )
goto Exit;
tables++;
}
/* Sort tables and check for overlaps. Because they are almost */
/* always ordered already, an in-place bubble sort with simultaneous */
/* boundary checking seems appropriate. */
tables = face->toc.tables;
for ( n = 0; n < toc->count - 1; n++ )
{
FT_UInt i, have_change;
have_change = 0;
for ( i = 0; i < toc->count - 1 - n; i++ )
{
PCF_TableRec tmp;
if ( tables[i].offset > tables[i + 1].offset )
{
tmp = tables[i];
tables[i] = tables[i + 1];
tables[i + 1] = tmp;
have_change = 1;
}
if ( ( tables[i].size > tables[i + 1].offset ) ||
( tables[i].offset > tables[i + 1].offset - tables[i].size ) )
return PCF_Err_Invalid_Offset;
}
if ( !have_change )
break;
}
#ifdef FT_DEBUG_LEVEL_TRACE
{
FT_UInt i, j;
const char* name = "?";
FT_TRACE4(( "pcf_read_TOC:\n" ));
FT_TRACE4(( " number of tables: %ld\n", face->toc.count ));
tables = face->toc.tables;
for ( i = 0; i < toc->count; i++ )
{
for ( j = 0; j < sizeof ( tableNames ) / sizeof ( tableNames[0] );
j++ )
if ( tables[i].type == (FT_UInt)( 1 << j ) )
name = tableNames[j];
FT_TRACE4(( " %d: type=%s, format=0x%X, "
"size=%ld (0x%lX), offset=%ld (0x%lX)\n",
i, name,
tables[i].format,
tables[i].size, tables[i].size,
tables[i].offset, tables[i].offset ));
}
}
#endif
return PCF_Err_Ok;
Exit:
//.........这里部分代码省略.........
开发者ID:151706061，项目名称:VTK，代码行数:101，代码来源:pcfread.c
示例16: tt_size_run_prep
tt_size_run_prep( TT_Size size,
FT_Bool pedantic )
{
TT_Face face = (TT_Face)size->root.face;
TT_ExecContext exec;
FT_Error error;
exec = size->context;
error = TT_Load_Context( exec, face, size );
if ( error )
return error;
exec->callTop = 0;
exec->top = 0;
exec->instruction_trap = FALSE;
exec->pedantic_hinting = pedantic;
TT_Set_CodeRange( exec,
tt_coderange_cvt,
face->cvt_program,
(FT_Long)face->cvt_program_size );
TT_Clear_CodeRange( exec, tt_coderange_glyph );
if ( face->cvt_program_size > 0 )
{
TT_Goto_CodeRange( exec, tt_coderange_cvt, 0 );
FT_TRACE4(( "Executing `prep' table.\n" ));
error = face->interpreter( exec );
#ifdef FT_DEBUG_LEVEL_TRACE
if ( error )
FT_TRACE4(( " interpretation failed with error code 0x%x\n",
e
|
客服电话
APP下载
官方微信
请发表评论