sfnt_init_face( FT_Stream      stream,
                  TT_Face        face,
                  FT_Int         face_index,
                  FT_Int         num_params,
                  FT_Parameter*  params )
  {
    FT_Error        error;
    FT_Library      library = face->root.driver->root.library;
    SFNT_Service    sfnt;


    /* for now, parameters are unused */
    FT_UNUSED( num_params );
    FT_UNUSED( params );


    sfnt = (SFNT_Service)face->sfnt;
    if ( !sfnt )
    {
      sfnt = (SFNT_Service)FT_Get_Module_Interface( library, "sfnt" );
      if ( !sfnt )
      {
        FT_ERROR(( "sfnt_init_face: cannot access `sfnt' module\n" ));
        return FT_THROW( Missing_Module );
      }

      face->sfnt       = sfnt;
      face->goto_table = sfnt->goto_table;
    }

    FT_FACE_FIND_GLOBAL_SERVICE( face, face->psnames, POSTSCRIPT_CMAPS );

    FT_TRACE2(( "SFNT driver\n" ));

    error = sfnt_open_font( stream, face );
    if ( error )
      return error;

    /* Stream may have changed in sfnt_open_font. */
    stream = face->root.stream;

    FT_TRACE2(( "sfnt_init_face: %08p, %ld\n", face, face_index ));

    if ( face_index < 0 )
      face_index = 0;

    if ( face_index >= face->ttc_header.count )
      return FT_THROW( Invalid_Argument );

    if ( FT_STREAM_SEEK( face->ttc_header.offsets[face_index] ) )
      return error;

    /* check that we have a valid TrueType file */
    error = sfnt->load_font_dir( face, stream );
    if ( error )
      return error;

    face->root.num_faces  = face->ttc_header.count;
    face->root.face_index = face_index;

    return error;
  }

  pfr_face_init( FT_Stream      stream,
                 FT_Face        pfrface,
                 FT_Int         face_index,
                 FT_Int         num_params,
                 FT_Parameter*  params )
  {
    PFR_Face  face = (PFR_Face)pfrface;
    FT_Error  error;

    FT_UNUSED( num_params );
    FT_UNUSED( params );


    FT_TRACE2(( "PFR driver\n" ));

    /* load the header and check it */
    error = pfr_header_load( &face->header, stream );
    if ( error )
      goto Exit;

    if ( !pfr_header_check( &face->header ) )
    {
      FT_TRACE2(( "  not a PFR font\n" ));
      error = FT_THROW( Unknown_File_Format );
      goto Exit;
    }

    /* check face index */
    {
      FT_UInt  num_faces;


      error = pfr_log_font_count( stream,
                                  face->header.log_dir_offset,
                                  &num_faces );
      if ( error )
        goto Exit;

      pfrface->num_faces = num_faces;
    }

    if ( face_index < 0 )
      goto Exit;

    if ( face_index >= pfrface->num_faces )
    {
      FT_ERROR(( "pfr_face_init: invalid face index\n" ));
      error = FT_THROW( Invalid_Argument );
      goto Exit;
    }

    /* load the face */
    error = pfr_log_font_load(
               &face->log_font, stream, face_index,
               face->header.log_dir_offset,
               FT_BOOL( face->header.phy_font_max_size_high != 0 ) );
    if ( error )
      goto Exit;

    /* now load the physical font descriptor */
    error = pfr_phy_font_load( &face->phy_font, stream,
                               face->log_font.phys_offset,
                               face->log_font.phys_size );
    if ( error )
      goto Exit;

    /* now set up all root face fields */
    {
      PFR_PhyFont  phy_font = &face->phy_font;


      pfrface->face_index = face_index;
      pfrface->num_glyphs = phy_font->num_chars + 1;
      pfrface->face_flags = FT_FACE_FLAG_SCALABLE;

      /* if all characters point to the same gps_offset 0, we */
      /* assume that the font only contains bitmaps           */
      {
        FT_UInt  nn;


        for ( nn = 0; nn < phy_font->num_chars; nn++ )
          if ( phy_font->chars[nn].gps_offset != 0 )
            break;

        if ( nn == phy_font->num_chars )
        {
          if ( phy_font->num_strikes > 0 )
            pfrface->face_flags = 0;        /* not scalable */
          else
          {
            FT_ERROR(( "pfr_face_init: font doesn't contain glyphs\n" ));
            error = FT_THROW( Invalid_File_Format );
            goto Exit;
          }
        }
      }

      if ( (phy_font->flags & PFR_PHY_PROPORTIONAL) == 0 )
        pfrface->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
//.........这里部分代码省略.........

  sfnt_load_face( FT_Stream      stream,
                  TT_Face        face,
                  FT_Int         face_index,
                  FT_Int         num_params,
                  FT_Parameter*  params )
  {
    FT_Error      error, psnames_error;
    FT_Bool       has_outline;
    FT_Bool       is_apple_sbit;

    SFNT_Service  sfnt = (SFNT_Service)face->sfnt;

    FT_UNUSED( face_index );
    FT_UNUSED( num_params );
    FT_UNUSED( params );


    /* Load tables */

    /* We now support two SFNT-based bitmapped font formats.  They */
    /* are recognized easily as they do not include a `glyf'       */
    /* table.                                                      */
    /*                                                             */
    /* The first format comes from Apple, and uses a table named   */
    /* `bhed' instead of `head' to store the font header (using    */
    /* the same format).  It also doesn't include horizontal and   */
    /* vertical metrics tables (i.e. `hhea' and `vhea' tables are  */
    /* missing).                                                   */
    /*                                                             */
    /* The other format comes from Microsoft, and is used with     */
    /* WinCE/PocketPC.  It looks like a standard TTF, except that  */
    /* it doesn't contain outlines.                                */
    /*                                                             */

    FT_TRACE2(( "sfnt_load_face: %08p\n\n", face ));

    /* do we have outlines in there? */
#ifdef FT_CONFIG_OPTION_INCREMENTAL
    has_outline   = FT_BOOL( face->root.internal->incremental_interface != 0 ||
                             tt_face_lookup_table( face, TTAG_glyf )    != 0 ||
                             tt_face_lookup_table( face, TTAG_CFF )     != 0 );
#else
    has_outline   = FT_BOOL( tt_face_lookup_table( face, TTAG_glyf ) != 0 ||
                             tt_face_lookup_table( face, TTAG_CFF )  != 0 );
#endif

    is_apple_sbit = 0;

    /* if this font doesn't contain outlines, we try to load */
    /* a `bhed' table                                        */
    if ( !has_outline && sfnt->load_bhed )
    {
      LOAD_( bhed );
      is_apple_sbit = FT_BOOL( !error );
    }

    /* load the font header (`head' table) if this isn't an Apple */
    /* sbit font file                                             */
    if ( !is_apple_sbit )
    {
      LOAD_( head );
      if ( error )
        goto Exit;
    }

    if ( face->header.Units_Per_EM == 0 )
    {
      error = SFNT_Err_Invalid_Table;

      goto Exit;
    }

    /* the following tables are often not present in embedded TrueType */
    /* fonts within PDF documents, so don't check for them.            */
    LOAD_( maxp );
    LOAD_( cmap );

    /* the following tables are optional in PCL fonts -- */
    /* don't check for errors                            */
    LOAD_( name );
    LOAD_( post );
    psnames_error = error;

    /* do not load the metrics headers and tables if this is an Apple */
    /* sbit font file                                                 */
    if ( !is_apple_sbit )
    {
      /* load the `hhea' and `hmtx' tables */
      LOADM_( hhea, 0 );
      if ( !error )
      {
        LOADM_( hmtx, 0 );
        if ( error == SFNT_Err_Table_Missing )
        {
          error = SFNT_Err_Hmtx_Table_Missing;

#ifdef FT_CONFIG_OPTION_INCREMENTAL
          /* If this is an incrementally loaded font and there are */
          /* overriding metrics, tolerate a missing `hmtx' table.  */
          if ( face->root.internal->incremental_interface          &&
//.........这里部分代码省略.........

  CID_New_Parser( CID_Parser*    parser,
                  FT_Stream      stream,
                  FT_Memory      memory,
                  PSAux_Service  psaux )
  {
    FT_Error  error;
    FT_ULong  base_offset, offset, ps_len;
    FT_Byte   buffer[256 + 10];
    FT_Int    buff_len;


    FT_MEM_SET( parser, 0, sizeof ( *parser ) );
    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream = stream;

    base_offset = FT_STREAM_POS();

    /* first of all, check the font format in the  header */
    if ( FT_FRAME_ENTER( 31 ) )
      goto Exit;

    if ( ft_strncmp( (char *)stream->cursor,
                     "%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
    {
      FT_TRACE2(( "[not a valid CID-keyed font]\n" ));
      error = CID_Err_Unknown_File_Format;
    }

    FT_FRAME_EXIT();
    if ( error )
      goto Exit;

    /* now, read the rest of the file, until we find a `StartData' */
    buff_len = 256;
    for (;;)
    {
      FT_Byte   *p, *limit = buffer + 256;
      FT_ULong  top_position;


      /* fill input buffer */
      buff_len -= 256;
      if ( buff_len > 0 )
        FT_MEM_MOVE( buffer, limit, buff_len );

      p = buffer + buff_len;

      if ( FT_STREAM_READ( p, 256 + 10 - buff_len ) )
        goto Exit;

      top_position = FT_STREAM_POS() - buff_len;
      buff_len = 256 + 10;

      /* look for `StartData' */
      for ( p = buffer; p < limit; p++ )
      {
        if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
        {
          /* save offset of binary data after `StartData' */
          offset = (FT_ULong)( top_position - ( limit - p ) + 10 );
          goto Found;
        }
      }
    }

  Found:
    /* we have found the start of the binary data.  We will now        */
    /* rewind and extract the frame of corresponding to the Postscript */
    /* section                                                         */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                    ||
         FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
      goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
    parser->num_dict       = -1;

  Exit:
    return error;
  }

  t42_parser_init( T42_Parser     parser,
                   FT_Stream      stream,
                   FT_Memory      memory,
                   PSAux_Service  psaux )
  {
    FT_Error  error = T42_Err_Ok;
    FT_Long   size;


    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream    = stream;
    parser->base_len  = 0;
    parser->base_dict = 0;
    parser->in_memory = 0;

    /*******************************************************************/
    /*                                                                 */
    /* Here a short summary of what is going on:                       */
    /*                                                                 */
    /*   When creating a new Type 42 parser, we try to locate and load */
    /*   the base dictionary, loading the whole font into memory.      */
    /*                                                                 */
    /*   When `loading' the base dictionary, we only set up pointers   */
    /*   in the case of a memory-based stream.  Otherwise, we allocate */
    /*   and load the base dictionary in it.                           */
    /*                                                                 */
    /*   parser->in_memory is set if we have a memory stream.          */
    /*                                                                 */

    if ( FT_STREAM_SEEK( 0L ) ||
         FT_FRAME_ENTER( 17 ) )
      goto Exit;

    if ( ft_memcmp( stream->cursor, "%!PS-TrueTypeFont", 17 ) != 0 )
    {
      FT_TRACE2(( "  not a Type42 font\n" ));
      error = T42_Err_Unknown_File_Format;
    }

    FT_FRAME_EXIT();

    if ( error || FT_STREAM_SEEK( 0 ) )
      goto Exit;

    size = stream->size;

    /* now, try to load `size' bytes of the `base' dictionary we */
    /* found previously                                          */

    /* if it is a memory-based resource, set up pointers */
    if ( !stream->read )
    {
      parser->base_dict = (FT_Byte*)stream->base + stream->pos;
      parser->base_len  = size;
      parser->in_memory = 1;

      /* check that the `size' field is valid */
      if ( FT_STREAM_SKIP( size ) )
        goto Exit;
    }
    else
    {
      /* read segment in memory */
      if ( FT_ALLOC( parser->base_dict, size )       ||
           FT_STREAM_READ( parser->base_dict, size ) )
        goto Exit;

      parser->base_len = size;
    }

    parser->root.base   = parser->base_dict;
    parser->root.cursor = parser->base_dict;
    parser->root.limit  = parser->root.cursor + parser->base_len;

  Exit:
    if ( error && !parser->in_memory )
      FT_FREE( parser->base_dict );

    return error;
  }

  /* synthesized into a TTC with one offset table.              */
  static FT_Error
  sfnt_open_font( FT_Stream  stream,
                  TT_Face    face )
  {
    FT_Memory  memory = stream->memory;
    FT_Error   error;
    FT_ULong   tag, offset;

    static const FT_Frame_Field  ttc_header_fields[] =
    {
#undef  FT_STRUCTURE
#define FT_STRUCTURE  TTC_HeaderRec

      FT_FRAME_START( 8 ),
        FT_FRAME_LONG( version ),
        FT_FRAME_LONG( count   ),  /* this is ULong in the specs */
      FT_FRAME_END
    };


    face->ttc_header.tag     = 0;
    face->ttc_header.version = 0;
    face->ttc_header.count   = 0;

    offset = FT_STREAM_POS();

    if ( FT_READ_ULONG( tag ) )
      return error;

    if ( tag != 0x00010000UL &&
         tag != TTAG_ttcf    &&
         tag != TTAG_OTTO    &&
         tag != TTAG_true    &&
         tag != TTAG_typ1    &&
         tag != 0x00020000UL )
    {
      FT_TRACE2(( "  not a font using the SFNT container format\n" ));
      return FT_THROW( Unknown_File_Format );
    }

    face->ttc_header.tag = TTAG_ttcf;

    if ( tag == TTAG_ttcf )
    {
      FT_Int  n;


      FT_TRACE3(( "sfnt_open_font: file is a collection\n" ));

      if ( FT_STREAM_READ_FIELDS( ttc_header_fields, &face->ttc_header ) )
        return error;

      if ( face->ttc_header.count == 0 )
        return FT_THROW( Invalid_Table );

      /* a rough size estimate: let's conservatively assume that there   */
      /* is just a single table info in each subfont header (12 + 16*1 = */
      /* 28 bytes), thus we have (at least) `12 + 4*count' bytes for the */
      /* size of the TTC header plus `28*count' bytes for all subfont    */
      /* headers                                                         */
      if ( (FT_ULong)face->ttc_header.count > stream->size / ( 28 + 4 ) )
        return FT_THROW( Array_Too_Large );

      /* now read the offsets of each font in the file */
      if ( FT_NEW_ARRAY( face->ttc_header.offsets, face->ttc_header.count ) )
        return error;

      if ( FT_FRAME_ENTER( face->ttc_header.count * 4L ) )
        return error;

      for ( n = 0; n < face->ttc_header.count; n++ )
        face->ttc_header.offsets[n] = FT_GET_ULONG();

      FT_FRAME_EXIT();
    }
    else
    {
      FT_TRACE3(( "sfnt_open_font: synthesize TTC\n" ));

      face->ttc_header.version = 1 << 16;
      face->ttc_header.count   = 1;

      if ( FT_NEW( face->ttc_header.offsets ) )
        return error;

      face->ttc_header.offsets[0] = offset;
    }

    return error;
  }

  tt_face_init( FT_Stream      stream,
                FT_Face        ttface,      /* TT_Face */
                FT_Int         face_index,
                FT_Int         num_params,
                FT_Parameter*  params )
  {
    FT_Error      error;
    FT_Library    library;
    SFNT_Service  sfnt;
    TT_Face       face = (TT_Face)ttface;


    FT_TRACE2(( "TTF driver\n" ));

    library = ttface->driver->root.library;

    sfnt = (SFNT_Service)FT_Get_Module_Interface( library, "sfnt" );
    if ( !sfnt )
    {
      FT_ERROR(( "tt_face_init: cannot access `sfnt' module\n" ));
      error = FT_THROW( Missing_Module );
      goto Exit;
    }

    /* create input stream from resource */
    if ( FT_STREAM_SEEK( 0 ) )
      goto Exit;

    /* check that we have a valid TrueType file */
    FT_TRACE2(( "  " ));
    error = sfnt->init_face( stream, face, face_index, num_params, params );

    /* Stream may have changed. */
    stream = face->root.stream;

    if ( error )
      goto Exit;

    /* We must also be able to accept Mac/GX fonts, as well as OT ones. */
    /* The 0x00020000 tag is completely undocumented; some fonts from   */
    /* Arphic made for Chinese Windows 3.1 have this.                   */
    if ( face->format_tag != 0x00010000L  && /* MS fonts                             */
         face->format_tag != 0x00020000L  && /* CJK fonts for Win 3.1                */
         face->format_tag != TTAG_true    && /* Mac fonts                            */
         face->format_tag != TTAG_0xA5kbd && /* `Keyboard.dfont' (legacy Mac OS X)   */
         face->format_tag != TTAG_0xA5lst )  /* `LastResort.dfont' (legacy Mac OS X) */
    {
      FT_TRACE2(( "  not a TTF font\n" ));
      goto Bad_Format;
    }

#ifdef TT_USE_BYTECODE_INTERPRETER
    ttface->face_flags |= FT_FACE_FLAG_HINTER;
#endif

    /* If we are performing a simple font format check, exit immediately. */
    if ( face_index < 0 )
      return FT_Err_Ok;

    /* Load font directory */
    error = sfnt->load_face( stream, face, face_index, num_params, params );
    if ( error )
      goto Exit;

    if ( tt_check_trickyness( ttface ) )
      ttface->face_flags |= FT_FACE_FLAG_TRICKY;

    error = tt_face_load_hdmx( face, stream );
    if ( error )
      goto Exit;

    if ( FT_IS_SCALABLE( ttface ) )
    {
#ifdef FT_CONFIG_OPTION_INCREMENTAL
      if ( !ttface->internal->incremental_interface )
#endif
      {
        error = tt_face_load_loca( face, stream );

        /* having a (non-zero) `glyf' table without */
        /* a `loca' table is not valid              */
        if ( face->glyf_len && FT_ERR_EQ( error, Table_Missing ) )
          goto Exit;
        if ( error )
          goto Exit;
      }

      /* `fpgm', `cvt', and `prep' are optional */
      error = tt_face_load_cvt( face, stream );
      if ( error && FT_ERR_NEQ( error, Table_Missing ) )
        goto Exit;

      error = tt_face_load_fpgm( face, stream );
      if ( error && FT_ERR_NEQ( error, Table_Missing ) )
        goto Exit;

      error = tt_face_load_prep( face, stream );
      if ( error && FT_ERR_NEQ( error, Table_Missing ) )
        goto Exit;

//.........这里部分代码省略.........

  T42_Face_Init( FT_Stream      stream,
                 FT_Face        t42face,       /* T42_Face */
                 FT_Int         face_index,
                 FT_Int         num_params,
                 FT_Parameter*  params )
  {
    T42_Face            face  = (T42_Face)t42face;
    FT_Error            error;
    FT_Service_PsCMaps  psnames;
    PSAux_Service       psaux;
    FT_Face             root  = (FT_Face)&face->root;
    T1_Font             type1 = &face->type1;
    PS_FontInfo         info  = &type1->font_info;

    FT_UNUSED( num_params );
    FT_UNUSED( params );
    FT_UNUSED( stream );


    face->ttf_face       = NULL;
    face->root.num_faces = 1;

    FT_FACE_FIND_GLOBAL_SERVICE( face, psnames, POSTSCRIPT_CMAPS );
    face->psnames = psnames;

    face->psaux = FT_Get_Module_Interface( FT_FACE_LIBRARY( face ),
                                           "psaux" );
    psaux = (PSAux_Service)face->psaux;
    if ( !psaux )
    {
      FT_ERROR(( "T42_Face_Init: cannot access `psaux' module\n" ));
      error = FT_THROW( Missing_Module );
      goto Exit;
    }

    FT_TRACE2(( "Type 42 driver\n" ));

    /* open the tokenizer, this will also check the font format */
    error = T42_Open_Face( face );
    if ( error )
      goto Exit;

    /* if we just wanted to check the format, leave successfully now */
    if ( face_index < 0 )
      goto Exit;

    /* check the face index */
    if ( ( face_index & 0xFFFF ) > 0 )
    {
      FT_ERROR(( "T42_Face_Init: invalid face index\n" ));
      error = FT_THROW( Invalid_Argument );
      goto Exit;
    }

    /* Now load the font program into the face object */

    /* Init the face object fields */
    /* Now set up root face fields */

    root->num_glyphs   = type1->num_glyphs;
    root->num_charmaps = 0;
    root->face_index   = 0;

    root->face_flags |= FT_FACE_FLAG_SCALABLE    |
                        FT_FACE_FLAG_HORIZONTAL  |
                        FT_FACE_FLAG_GLYPH_NAMES;

    if ( info->is_fixed_pitch )
      root->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;

    /* We only set this flag if we have the patented bytecode interpreter. */
    /* There are no known `tricky' Type42 fonts that could be loaded with  */
    /* the unpatented interpreter.                                         */
#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
    root->face_flags |= FT_FACE_FLAG_HINTER;
#endif

    /* XXX: TODO -- add kerning with .afm support */

    /* get style name -- be careful, some broken fonts only */
    /* have a `/FontName' dictionary entry!                 */
    root->family_name = info->family_name;
    /* assume "Regular" style if we don't know better */
    root->style_name = (char *)"Regular";
    if ( root->family_name )
    {
      char*  full   = info->full_name;
      char*  family = root->family_name;


      if ( full )
      {
        while ( *full )
        {
          if ( *full == *family )
          {
            family++;
            full++;
          }
          else
//.........这里部分代码省略.........

cid_parser_new( CID_Parser*    parser,
                FT_Stream      stream,
                FT_Memory      memory,
                PSAux_Service  psaux )
{
    FT_Error  error;
    FT_ULong  base_offset, offset, ps_len;
    FT_Byte   *cur, *limit;
    FT_Byte   *arg1, *arg2;


    FT_MEM_ZERO( parser, sizeof ( *parser ) );
    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream = stream;

    base_offset = FT_STREAM_POS();

    /* first of all, check the font format in the header */
    if ( FT_FRAME_ENTER( 31 ) )
        goto Exit;

    if ( ft_strncmp( (char *)stream->cursor,
                     "%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
    {
        FT_TRACE2(( "  not a CID-keyed font\n" ));
        error = FT_THROW( Unknown_File_Format );
    }

    FT_FRAME_EXIT();
    if ( error )
        goto Exit;

Again:
    /* now, read the rest of the file until we find */
    /* `StartData' or `/sfnts'                      */
    {
        FT_Byte   buffer[256 + 10];
        FT_ULong  read_len = 256 + 10;
        FT_Byte*  p        = buffer;


        for ( offset = FT_STREAM_POS(); ; offset += 256 )
        {
            FT_ULong  stream_len;


            stream_len = stream->size - FT_STREAM_POS();
            if ( stream_len == 0 )
            {
                FT_TRACE2(( "cid_parser_new: no `StartData' keyword found\n" ));
                error = FT_THROW( Invalid_File_Format );
                goto Exit;
            }

            read_len = FT_MIN( read_len, stream_len );
            if ( FT_STREAM_READ( p, read_len ) )
                goto Exit;

            if ( read_len < 256 )
                p[read_len]  = '\0';

            limit = p + read_len - 10;

            for ( p = buffer; p < limit; p++ )
            {
                if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
                {
                    /* save offset of binary data after `StartData' */
                    offset += (FT_ULong)( p - buffer + 10 );
                    goto Found;
                }
                else if ( p[1] == 's' && ft_strncmp( (char*)p, "/sfnts", 6 ) == 0 )
                {
                    offset += (FT_ULong)( p - buffer + 7 );
                    goto Found;
                }
            }

            FT_MEM_MOVE( buffer, p, 10 );
            read_len = 256;
            p = buffer + 10;
        }
    }

Found:
    /* We have found the start of the binary data or the `/sfnts' token. */
    /* Now rewind and extract the frame corresponding to this PostScript */
    /* section.                                                          */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                  ||
            FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
        goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
//.........这里部分代码省略.........

  tt_face_load_font_dir( TT_Face    face,
                         FT_Stream  stream )
  {
    SFNT_HeaderRec  sfnt;
    FT_Error        error;
    FT_Memory       memory = stream->memory;
    TT_TableRec*    entry;
    FT_Int          nn;

    static const FT_Frame_Field  offset_table_fields[] =
    {
#undef  FT_STRUCTURE
#define FT_STRUCTURE  SFNT_HeaderRec

      FT_FRAME_START( 8 ),
        FT_FRAME_USHORT( num_tables ),
        FT_FRAME_USHORT( search_range ),
        FT_FRAME_USHORT( entry_selector ),
        FT_FRAME_USHORT( range_shift ),
      FT_FRAME_END
    };


    FT_TRACE2(( "tt_face_load_font_dir: %08p\n", face ));

    /* read the offset table */

    sfnt.offset = FT_STREAM_POS();

    if ( FT_READ_ULONG( sfnt.format_tag )                    ||
         FT_STREAM_READ_FIELDS( offset_table_fields, &sfnt ) )
      goto Exit;

    /* many fonts don't have these fields set correctly */
#if 0
    if ( sfnt.search_range != 1 << ( sfnt.entry_selector + 4 )        ||
         sfnt.search_range + sfnt.range_shift != sfnt.num_tables << 4 )
      return FT_THROW( Unknown_File_Format );
#endif

    /* load the table directory */

    FT_TRACE2(( "-- Number of tables: %10u\n",    sfnt.num_tables ));
    FT_TRACE2(( "-- Format version:   0x%08lx\n", sfnt.format_tag ));

    if ( sfnt.format_tag != TTAG_OTTO )
    {
      /* check first */
      error = check_table_dir( &sfnt, stream );
      if ( error )
      {
        FT_TRACE2(( "tt_face_load_font_dir:"
                    " invalid table directory for TrueType\n" ));

        goto Exit;
      }
    }

    face->num_tables = sfnt.num_tables;
    face->format_tag = sfnt.format_tag;

    if ( FT_QNEW_ARRAY( face->dir_tables, face->num_tables ) )
      goto Exit;

    if ( FT_STREAM_SEEK( sfnt.offset + 12 )       ||
         FT_FRAME_ENTER( face->num_tables * 16L ) )
      goto Exit;

    entry = face->dir_tables;

    FT_TRACE2(( "\n"
                "  tag    offset    length   checksum\n"
                "  ----------------------------------\n" ));

    for ( nn = 0; nn < sfnt.num_tables; nn++ )
    {
      entry->Tag      = FT_GET_TAG4();
      entry->CheckSum = FT_GET_ULONG();
      entry->Offset   = FT_GET_LONG();
      entry->Length   = FT_GET_LONG();

      /* ignore invalid tables */
      if ( entry->Offset + entry->Length > stream->size )
        continue;
      else
      {
        FT_TRACE2(( "  %c%c%c%c  %08lx  %08lx  %08lx\n",
                    (FT_Char)( entry->Tag >> 24 ),
                    (FT_Char)( entry->Tag >> 16 ),
                    (FT_Char)( entry->Tag >> 8  ),
                    (FT_Char)( entry->Tag       ),
                    entry->Offset,
                    entry->Length,
                    entry->CheckSum ));
        entry++;
      }
    }

    FT_FRAME_EXIT();

//.........这里部分代码省略.........

  PCF_Face_Init( FT_Stream      stream,
                 PCF_Face       face,
                 FT_Int         face_index,
                 FT_Int         num_params,
                 FT_Parameter*  params )
  {
    FT_Error  error = PCF_Err_Ok;

    FT_UNUSED( num_params );
    FT_UNUSED( params );
    FT_UNUSED( face_index );


    error = pcf_load_font( stream, face );
    if ( error )
      goto Fail;

    /* set-up charmap */
    {
      FT_String  *charset_registry, *charset_encoding;
      FT_Bool     unicode_charmap  = 0;


      charset_registry = face->charset_registry;
      charset_encoding = face->charset_encoding;

      if ( ( charset_registry != NULL ) &&
           ( charset_encoding != NULL ) )
      {
        if ( !ft_strcmp( face->charset_registry, "ISO10646" )     ||
             ( !ft_strcmp( face->charset_registry, "ISO8859" ) &&
               !ft_strcmp( face->charset_encoding, "1" )       )  )
          unicode_charmap = 1;
      }

#ifdef FT_CONFIG_OPTION_USE_CMAPS

      {
        FT_CharMapRec  charmap;


        charmap.face        = FT_FACE( face );
        charmap.encoding    = ft_encoding_none;
        charmap.platform_id = 0;
        charmap.encoding_id = 0;

        if ( unicode_charmap )
        {
          charmap.encoding    = ft_encoding_unicode;
          charmap.platform_id = 3;
          charmap.encoding_id = 1;
        }

        error = FT_CMap_New( &pcf_cmap_class, NULL, &charmap, NULL );

        /* Select default charmap */
        if (face->root.num_charmaps)
          face->root.charmap = face->root.charmaps[0];
      }

#else  /* !FT_CONFIG_OPTION_USE_CMAPS */

      /* XXX: charmaps.  For now, report unicode for Unicode and Latin 1 */
      face->root.charmaps     = &face->charmap_handle;
      face->root.num_charmaps = 1;

      face->charmap.encoding    = ft_encoding_none;
      face->charmap.platform_id = 0;
      face->charmap.encoding_id = 0;

      if ( unicode_charmap )
      {
        face->charmap.encoding    = ft_encoding_unicode;
        face->charmap.platform_id = 3;
        face->charmap.encoding_id = 1;
      }

      face->charmap.face   = &face->root;
      face->charmap_handle = &face->charmap;
      face->root.charmap   = face->charmap_handle;

#endif /* !FT_CONFIG_OPTION_USE_CMAPS */

    }

  Exit:
    return error;

  Fail:
    FT_TRACE2(( "[not a valid PCF file]\n" ));
    error = PCF_Err_Unknown_File_Format;  /* error */
    goto Exit;
  }

  cff_font_load( FT_Stream  stream,
                 FT_Int     face_index,
                 CFF_Font   font )
  {
    static const FT_Frame_Field  cff_header_fields[] =
    {
#undef  FT_STRUCTURE
#define FT_STRUCTURE  CFF_FontRec

      FT_FRAME_START( 4 ),
        FT_FRAME_BYTE( version_major ),
        FT_FRAME_BYTE( version_minor ),
        FT_FRAME_BYTE( header_size ),
        FT_FRAME_BYTE( absolute_offsize ),
      FT_FRAME_END
    };

    FT_Error         error;
    FT_Memory        memory = stream->memory;
    FT_ULong         base_offset;
    CFF_FontRecDict  dict;

    FT_ZERO( font );

    font->stream = stream;
    font->memory = memory;
    dict         = &font->top_font.font_dict;
    base_offset  = FT_STREAM_POS();

    /* read CFF font header */
    if ( FT_STREAM_READ_FIELDS( cff_header_fields, font ) )
      goto Exit;

    /* check format */
    if ( font->version_major   != 1 ||
         font->header_size      < 4 ||
         font->absolute_offsize > 4 )
    {
      FT_TRACE2(( "[not a CFF font header!]\n" ));
      error = CFF_Err_Unknown_File_Format;
      goto Exit;
    }

    /* skip the rest of the header */
    if ( FT_STREAM_SKIP( font->header_size - 4 ) )
      goto Exit;

    /* read the name, top dict, string and global subrs index */
    if ( FT_SET_ERROR( cff_new_index( &font->name_index,         stream, 0 )) ||
         FT_SET_ERROR( cff_new_index( &font->font_dict_index,    stream, 0 )) ||
         FT_SET_ERROR( cff_new_index( &font->string_index,       stream, 0 )) ||
         FT_SET_ERROR( cff_new_index( &font->global_subrs_index, stream, 1 )) )
      goto Exit;

    /* well, we don't really forget the `disabled' fonts... */
    font->num_faces = font->name_index.count;
    if ( face_index >= (FT_Int)font->num_faces )
    {
      FT_ERROR(( "cff_font_load: incorrect face index = %d\n",
                 face_index ));
      error = CFF_Err_Invalid_Argument;
    }

    /* in case of a font format check, simply exit now */
    if ( face_index < 0 )
      goto Exit;

    /* now, parse the top-level font dictionary */
    error = cff_subfont_load( &font->top_font,
                              &font->font_dict_index,
                              face_index,
                              stream,
                              base_offset );
    if ( error )
      goto Exit;

    /* now, check for a CID font */
    if ( dict->cid_registry )
    {
      CFF_IndexRec  fd_index;
      CFF_SubFont   sub;
      FT_UInt       idx;


      /* this is a CID-keyed font, we must now allocate a table of */
      /* sub-fonts, then load each of them separately              */
      if ( FT_STREAM_SEEK( base_offset + dict->cid_fd_array_offset ) )
        goto Exit;

      error = cff_new_index( &fd_index, stream, 0 );
      if ( error )
        goto Exit;

      if ( fd_index.count > CFF_MAX_CID_FONTS )
      {
        FT_ERROR(( "cff_font_load: FD array too large in CID font\n" ));
        goto Fail_CID;
      }

      /* allocate & read each font dict independently */
//.........这里部分代码省略.........

  tt_face_load_font_dir( TT_Face    face,
                         FT_Stream  stream )
  {
    SFNT_HeaderRec  sfnt;
    FT_Error        error;
    FT_Memory       memory = stream->memory;
    TT_TableRec*    entry;
    TT_TableRec*    limit;

    static const FT_Frame_Field  offset_table_fields[] =
    {
#undef  FT_STRUCTURE
#define FT_STRUCTURE  SFNT_HeaderRec

      FT_FRAME_START( 8 ),
        FT_FRAME_USHORT( num_tables ),
        FT_FRAME_USHORT( search_range ),
        FT_FRAME_USHORT( entry_selector ),
        FT_FRAME_USHORT( range_shift ),
      FT_FRAME_END
    };


    FT_TRACE2(( "tt_face_load_font_dir: %08p\n", face ));

    /* read the offset table */

    sfnt.offset = FT_STREAM_POS();

    if ( FT_READ_ULONG( sfnt.format_tag )                    ||
         FT_STREAM_READ_FIELDS( offset_table_fields, &sfnt ) )
      return error;

    /* many fonts don't have these fields set correctly */
#if 0
    if ( sfnt.search_range != 1 << ( sfnt.entry_selector + 4 )        ||
         sfnt.search_range + sfnt.range_shift != sfnt.num_tables << 4 )
      return SFNT_Err_Unknown_File_Format;
#endif

    /* load the table directory */

    FT_TRACE2(( "-- Tables count:   %12u\n",  sfnt.num_tables ));
    FT_TRACE2(( "-- Format version: %08lx\n", sfnt.format_tag ));

    /* check first */
    error = check_table_dir( &sfnt, stream );
    if ( error )
    {
      FT_TRACE2(( "tt_face_load_font_dir: invalid table directory!\n" ));

      return error;
    }

    face->num_tables = sfnt.num_tables;
    face->format_tag = sfnt.format_tag;

    if ( FT_QNEW_ARRAY( face->dir_tables, face->num_tables ) )
      return error;

    if ( FT_STREAM_SEEK( sfnt.offset + 12 )       ||
         FT_FRAME_ENTER( face->num_tables * 16L ) )
      return error;

    entry = face->dir_tables;
    limit = entry + face->num_tables;

    for ( ; entry < limit; entry++ )
    {
      entry->Tag      = FT_GET_TAG4();
      entry->CheckSum = FT_GET_ULONG();
      entry->Offset   = FT_GET_LONG();
      entry->Length   = FT_GET_LONG();

      FT_TRACE2(( "  %c%c%c%c  -  %08lx  -  %08lx\n",
                  (FT_Char)( entry->Tag >> 24 ),
                  (FT_Char)( entry->Tag >> 16 ),
                  (FT_Char)( entry->Tag >> 8  ),
                  (FT_Char)( entry->Tag       ),
                  entry->Offset,
                  entry->Length ));
    }

    FT_FRAME_EXIT();

    FT_TRACE2(( "table directory loaded\n\n" ));

    return error;
  }

  cff_face_init( FT_Stream      stream,
                 FT_Face        cffface,        /* CFF_Face */
                 FT_Int         face_index,
                 FT_Int         num_params,
                 FT_Parameter*  params )
  {
    CFF_Face            face = (CFF_Face)cffface;
    FT_Error            error;
    SFNT_Service        sfnt;
    FT_Service_PsCMaps  psnames;
    PSHinter_Service    pshinter;
    FT_Bool             pure_cff    = 1;
    FT_Bool             sfnt_format = 0;
    FT_Library library = cffface->driver->root.library;


#if 0
    FT_FACE_FIND_GLOBAL_SERVICE( face, sfnt,     SFNT );
    FT_FACE_FIND_GLOBAL_SERVICE( face, psnames,  POSTSCRIPT_NAMES );
    FT_FACE_FIND_GLOBAL_SERVICE( face, pshinter, POSTSCRIPT_HINTER );

    if ( !sfnt )
      goto Bad_Format;
#else
    sfnt = (SFNT_Service)FT_Get_Module_Interface(
             library, "sfnt" );
    if ( !sfnt )
      goto Bad_Format;

    FT_FACE_FIND_GLOBAL_SERVICE( face, psnames, POSTSCRIPT_CMAPS );

    pshinter = (PSHinter_Service)FT_Get_Module_Interface(
                 library, "pshinter" );
#endif

    /* create input stream from resource */
    if ( FT_STREAM_SEEK( 0 ) )
      goto Exit;

    /* check whether we have a valid OpenType file */
    error = sfnt->init_face( stream, face, face_index, num_params, params );
    if ( !error )
    {
      if ( face->format_tag != TTAG_OTTO )  /* `OTTO'; OpenType/CFF font */
      {
        FT_TRACE2(( "[not a valid OpenType/CFF font]\n" ));
        goto Bad_Format;
      }

      /* if we are performing a simple font format check, exit immediately */
      if ( face_index < 0 )
        return CFF_Err_Ok;

      /* UNDOCUMENTED!  A CFF in an SFNT can have only a single font. */
      if ( face_index > 0 )
      {
        FT_ERROR(( "cff_face_init: invalid face index\n" ));
        error = CFF_Err_Invalid_Argument;
        goto Exit;
      }

      sfnt_format = 1;

      /* now, the font can be either an OpenType/CFF font, or an SVG CEF */
      /* font; in the latter case it doesn't have a `head' table         */
      error = face->goto_table( face, TTAG_head, stream, 0 );
      if ( !error )
      {
        pure_cff = 0;

        /* load font directory */
        error = sfnt->load_face( stream, face, 0, num_params, params );
        if ( error )
          goto Exit;
      }
      else
      {
        /* load the `cmap' table explicitly */
        error = sfnt->load_cmap( face, stream );
        if ( error )
          goto Exit;

        /* XXX: we don't load the GPOS table, as OpenType Layout     */
        /* support will be added later to a layout library on top of */
        /* FreeType 2                                                */
      }

      /* now load the CFF part of the file */
      error = face->goto_table( face, TTAG_CFF, stream, 0 );
      if ( error )
        goto Exit;
    }
    else
    {
      /* rewind to start of file; we are going to load a pure-CFF font */
      if ( FT_STREAM_SEEK( 0 ) )
        goto Exit;
      error = CFF_Err_Ok;
    }

//.........这里部分代码省略.........

  /*
   *  This function tries to load a small bitmap within a given FTC_SNode.
   *  Note that it returns a non-zero error code _only_ in the case of
   *  out-of-memory condition.  For all other errors (e.g., corresponding
   *  to a bad font file), this function will mark the sbit as `unavailable'
   *  and return a value of 0.
   *
   *  You should also read the comment within the @ftc_snode_compare
   *  function below to see how out-of-memory is handled during a lookup.
   */
  static FT_Error
  ftc_snode_load( FTC_SNode    snode,
                  FTC_Manager  manager,
                  FT_UInt      gindex,
                  FT_ULong    *asize )
  {
    FT_Error          error;
    FTC_GNode         gnode  = FTC_GNODE( snode );
    FTC_Family        family = gnode->family;
    FT_Memory         memory = manager->memory;
    FT_Face           face;
    FTC_SBit          sbit;
    FTC_SFamilyClass  clazz;


    if ( (FT_UInt)(gindex - gnode->gindex) >= snode->count )
    {
      FT_ERROR(( "ftc_snode_load: invalid glyph index" ));
      return FT_THROW( Invalid_Argument );
    }

    sbit  = snode->sbits + ( gindex - gnode->gindex );
    clazz = (FTC_SFamilyClass)family->clazz;

    sbit->buffer = 0;

    error = clazz->family_load_glyph( family, gindex, manager, &face );
    if ( error )
      goto BadGlyph;

    {
      FT_Int        temp;
      FT_GlyphSlot  slot   = face->glyph;
      FT_Bitmap*    bitmap = &slot->bitmap;
      FT_Pos        xadvance, yadvance; /* FT_GlyphSlot->advance.{x|y} */


      if ( slot->format != FT_GLYPH_FORMAT_BITMAP )
      {
        FT_TRACE0(( "ftc_snode_load:"
                    " glyph loaded didn't return a bitmap\n" ));
        goto BadGlyph;
      }

      /* Check whether our values fit into 8-bit containers!    */
      /* If this is not the case, our bitmap is too large       */
      /* and we will leave it as `missing' with sbit.buffer = 0 */

#define CHECK_CHAR( d )  ( temp = (FT_Char)d, (FT_Int) temp == (FT_Int) d )
#define CHECK_BYTE( d )  ( temp = (FT_Byte)d, (FT_UInt)temp == (FT_UInt)d )

      /* horizontal advance in pixels */
      xadvance = ( slot->advance.x + 32 ) >> 6;
      yadvance = ( slot->advance.y + 32 ) >> 6;

      if ( !CHECK_BYTE( bitmap->rows  )     ||
           !CHECK_BYTE( bitmap->width )     ||
           !CHECK_CHAR( bitmap->pitch )     ||
           !CHECK_CHAR( slot->bitmap_left ) ||
           !CHECK_CHAR( slot->bitmap_top  ) ||
           !CHECK_CHAR( xadvance )          ||
           !CHECK_CHAR( yadvance )          )
      {
        FT_TRACE2(( "ftc_snode_load:"
                    &qu