本文整理汇总了C++中FT_STREAM_SKIP函数的典型用法代码示例。如果您正苦于以下问题：C++ FT_STREAM_SKIP函数的具体用法？C++ FT_STREAM_SKIP怎么用？C++ FT_STREAM_SKIP使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了FT_STREAM_SKIP函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: pcf_seek_to_table_type
static FT_Error
pcf_seek_to_table_type( FT_Stream stream,
PCF_Table tables,
FT_Int ntables,
FT_ULong type,
FT_ULong *aformat,
FT_ULong *asize )
{
FT_Error error = 0;
FT_Int i;
for ( i = 0; i < ntables; i++ )
if ( tables[i].type == type )
{
if ( stream->pos > tables[i].offset )
return PCF_Err_Invalid_Stream_Skip;
if ( FT_STREAM_SKIP( tables[i].offset - stream->pos ) )
return PCF_Err_Invalid_Stream_Skip;
*asize = tables[i].size; /* unused - to be removed */
*aformat = tables[i].format;
return PCF_Err_Ok;
}
return PCF_Err_Invalid_File_Format;
}
开发者ID:stefanhendriks，项目名称:dune2themaker，代码行数:29，代码来源:pcfread.c
示例2: load_post_names
static FT_Error
load_post_names( TT_Face face )
{
FT_Stream stream;
FT_Error error;
FT_Fixed format;
/* get a stream for the face's resource */
stream = face->root.stream;
/* seek to the beginning of the PS names table */
error = face->goto_table( face, TTAG_post, stream, 0 );
if ( error )
goto Exit;
format = face->postscript.FormatType;
/* go to beginning of subtable */
if ( FT_STREAM_SKIP( 32 ) )
goto Exit;
/* now read postscript table */
if ( format == 0x00020000L )
error = load_format_20( face, stream );
else if ( format == 0x00028000L )
error = load_format_25( face, stream );
else
error = SFNT_Err_Invalid_File_Format;
face->postscript_names.loaded = 1;
Exit:
return error;
}
开发者ID:1tgr，项目名称:mobius，代码行数:35，代码来源:ttpost.c
示例3: pcf_seek_to_table_type
static FT_Error
pcf_seek_to_table_type( FT_Stream stream,
PCF_Table tables,
FT_Int ntables,
FT_ULong type,
FT_ULong *aformat,
FT_ULong *asize )
{
FT_Error error = PCF_Err_Invalid_File_Format;
FT_Int i;
for ( i = 0; i < ntables; i++ )
if ( tables[i].type == type )
{
if ( stream->pos > tables[i].offset )
{
error = PCF_Err_Invalid_Stream_Skip;
goto Fail;
}
if ( FT_STREAM_SKIP( tables[i].offset - stream->pos ) )
{
error = PCF_Err_Invalid_Stream_Skip;
goto Fail;
}
*asize = tables[i].size;
*aformat = tables[i].format;
return PCF_Err_Ok;
}
Fail:
*asize = 0;
return error;
}
开发者ID:4nakin，项目名称:Aquaria_clean，代码行数:37，代码来源:pcfread.c
示例4: pcf_seek_to_table_type
static FT_Error
pcf_seek_to_table_type( FT_Stream stream,
PCF_Table tables,
FT_ULong ntables, /* same as PCF_Toc->count */
FT_ULong type,
FT_ULong *aformat,
FT_ULong *asize )
{
FT_Error error = FT_ERR( Invalid_File_Format );
FT_ULong i;
for ( i = 0; i < ntables; i++ )
if ( tables[i].type == type )
{
if ( stream->pos > tables[i].offset )
{
error = FT_THROW( Invalid_Stream_Skip );
goto Fail;
}
if ( FT_STREAM_SKIP( tables[i].offset - stream->pos ) )
{
error = FT_THROW( Invalid_Stream_Skip );
goto Fail;
}
*asize = tables[i].size;
*aformat = tables[i].format;
return FT_Err_Ok;
}
Fail:
*asize = 0;
return error;
}
开发者ID:OpenTechEngine，项目名称:OpenTechBFG，代码行数:37，代码来源:pcfread.c
示例5: pfr_log_font_load
pfr_log_font_load( PFR_LogFont log_font,
FT_Stream stream,
FT_UInt idx,
FT_UInt32 section_offset,
FT_Bool size_increment )
{
FT_UInt num_log_fonts;
FT_UInt flags;
FT_UInt32 offset;
FT_UInt32 size;
FT_Error error;
if ( FT_STREAM_SEEK( section_offset ) ||
FT_READ_USHORT( num_log_fonts ) )
goto Exit;
if ( idx >= num_log_fonts )
return FT_THROW( Invalid_Argument );
if ( FT_STREAM_SKIP( idx * 5 ) ||
FT_READ_USHORT( size ) ||
FT_READ_UOFF3 ( offset ) )
goto Exit;
/* save logical font size and offset */
log_font->size = size;
log_font->offset = offset;
/* now, check the rest of the table before loading it */
{
FT_Byte* p;
FT_Byte* limit;
FT_UInt local;
if ( FT_STREAM_SEEK( offset ) ||
FT_FRAME_ENTER( size ) )
goto Exit;
p = stream->cursor;
limit = p + size;
PFR_CHECK( 13 );
log_font->matrix[0] = PFR_NEXT_LONG( p );
log_font->matrix[1] = PFR_NEXT_LONG( p );
log_font->matrix[2] = PFR_NEXT_LONG( p );
log_font->matrix[3] = PFR_NEXT_LONG( p );
flags = PFR_NEXT_BYTE( p );
local = 0;
if ( flags & PFR_LOG_STROKE )
{
local++;
if ( flags & PFR_LOG_2BYTE_STROKE )
local++;
if ( ( flags & PFR_LINE_JOIN_MASK ) == PFR_LINE_JOIN_MITER )
local += 3;
}
if ( flags & PFR_LOG_BOLD )
{
local++;
if ( flags & PFR_LOG_2BYTE_BOLD )
local++;
}
PFR_CHECK( local );
if ( flags & PFR_LOG_STROKE )
{
log_font->stroke_thickness = ( flags & PFR_LOG_2BYTE_STROKE )
? PFR_NEXT_SHORT( p )
: PFR_NEXT_BYTE( p );
if ( ( flags & PFR_LINE_JOIN_MASK ) == PFR_LINE_JOIN_MITER )
log_font->miter_limit = PFR_NEXT_LONG( p );
}
if ( flags & PFR_LOG_BOLD )
{
log_font->bold_thickness = ( flags & PFR_LOG_2BYTE_BOLD )
? PFR_NEXT_SHORT( p )
: PFR_NEXT_BYTE( p );
}
if ( flags & PFR_LOG_EXTRA_ITEMS )
{
error = pfr_extra_items_skip( &p, limit );
if ( error )
goto Fail;
}
PFR_CHECK( 5 );
log_font->phys_size = PFR_NEXT_USHORT( p );
log_font->phys_offset = PFR_NEXT_ULONG( p );
if ( size_increment )
{
//.........这里部分代码省略.........
开发者ID:ImageMagick，项目名称:ttf，代码行数:101，代码来源:pfrload.c
示例6: cff_index_init
static FT_Error
cff_index_init( CFF_Index idx,
FT_Stream stream,
FT_Bool load )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_UShort count;
FT_MEM_ZERO( idx, sizeof ( *idx ) );
idx->stream = stream;
idx->start = FT_STREAM_POS();
if ( !FT_READ_USHORT( count ) &&
count > 0 )
{
FT_Byte offsize;
FT_ULong size;
/* there is at least one element; read the offset size, */
/* then access the offset table to compute the index's total size */
if ( FT_READ_BYTE( offsize ) )
goto Exit;
if ( offsize < 1 || offsize > 4 )
{
error = FT_Err_Invalid_Table;
goto Exit;
}
idx->count = count;
idx->off_size = offsize;
size = (FT_ULong)( count + 1 ) * offsize;
idx->data_offset = idx->start + 3 + size;
if ( FT_STREAM_SKIP( size - offsize ) )
goto Exit;
size = cff_index_read_offset( idx, &error );
if ( error )
goto Exit;
if ( size == 0 )
{
error = CFF_Err_Invalid_Table;
goto Exit;
}
idx->data_size = --size;
if ( load )
{
/* load the data */
if ( FT_FRAME_EXTRACT( size, idx->bytes ) )
goto Exit;
}
else
{
/* skip the data */
if ( FT_STREAM_SKIP( size ) )
goto Exit;
}
}
Exit:
if ( error )
FT_FREE( idx->offsets );
return error;
}
开发者ID:Ali-il，项目名称:gamekit，代码行数:73，代码来源:cffload.c
示例7: cff_font_load
cff_font_load( FT_Stream stream,
FT_Int face_index,
CFF_Font font,
FT_Bool pure_cff )
{
static const FT_Frame_Field cff_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE CFF_FontRec
FT_FRAME_START( 4 ),
FT_FRAME_BYTE( version_major ),
FT_FRAME_BYTE( version_minor ),
FT_FRAME_BYTE( header_size ),
FT_FRAME_BYTE( absolute_offsize ),
FT_FRAME_END
};
FT_Error error;
FT_Memory memory = stream->memory;
FT_ULong base_offset;
CFF_FontRecDict dict;
FT_ZERO( font );
font->stream = stream;
font->memory = memory;
dict = &font->top_font.font_dict;
base_offset = FT_STREAM_POS();
/* read CFF font header */
if ( FT_STREAM_READ_FIELDS( cff_header_fields, font ) )
goto Exit;
/* check format */
if ( font->version_major != 1 ||
font->header_size < 4 ||
font->absolute_offsize > 4 )
{
FT_TRACE2(( "[not a CFF font header!]\n" ));
error = CFF_Err_Unknown_File_Format;
goto Exit;
}
/* skip the rest of the header */
if ( FT_STREAM_SKIP( font->header_size - 4 ) )
goto Exit;
/* read the name, top dict, string and global subrs index */
if ( FT_SET_ERROR( cff_index_init( &font->name_index,
stream, 0 ) ) ||
FT_SET_ERROR( cff_index_init( &font->font_dict_index,
stream, 0 ) ) ||
FT_SET_ERROR( cff_index_init( &font->string_index,
stream, 0 ) ) ||
FT_SET_ERROR( cff_index_init( &font->global_subrs_index,
stream, 1 ) ) )
goto Exit;
/* well, we don't really forget the `disabled' fonts... */
font->num_faces = font->name_index.count;
if ( face_index >= (FT_Int)font->num_faces )
{
FT_ERROR(( "cff_font_load: incorrect face index = %d\n",
face_index ));
error = CFF_Err_Invalid_Argument;
}
/* in case of a font format check, simply exit now */
if ( face_index < 0 )
goto Exit;
/* now, parse the top-level font dictionary */
error = cff_subfont_load( &font->top_font,
&font->font_dict_index,
face_index,
stream,
base_offset );
if ( error )
goto Exit;
if ( FT_STREAM_SEEK( base_offset + dict->charstrings_offset ) )
goto Exit;
error = cff_index_init( &font->charstrings_index, stream, 0 );
if ( error )
goto Exit;
/* now, check for a CID font */
if ( dict->cid_registry != 0xFFFFU )
{
CFF_IndexRec fd_index;
CFF_SubFont sub;
FT_UInt idx;
/* this is a CID-keyed font, we must now allocate a table of */
/* sub-fonts, then load each of them separately */
if ( FT_STREAM_SEEK( base_offset + dict->cid_fd_array_offset ) )
//.........这里部分代码省略.........
开发者ID:Ali-il，项目名称:gamekit，代码行数:101，代码来源:cffload.c
示例8: T1_Get_Private_Dict
T1_Get_Private_Dict( T1_Parser parser,
PSAux_Service psaux )
{
FT_Stream stream = parser->stream;
FT_Memory memory = parser->root.memory;
FT_Error error = FT_Err_Ok;
FT_ULong size;
if ( parser->in_pfb )
{
/* in the case of the PFB format, the private dictionary can be */
/* made of several segments. We thus first read the number of */
/* segments to compute the total size of the private dictionary */
/* then re-read them into memory. */
FT_Long start_pos = FT_STREAM_POS();
FT_UShort tag;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error )
goto Fail;
if ( tag != 0x8002U )
break;
parser->private_len += size;
if ( FT_STREAM_SKIP( size ) )
goto Fail;
}
/* Check that we have a private dictionary there */
/* and allocate private dictionary buffer */
if ( parser->private_len == 0 )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" invalid private dictionary section\n" ));
error = FT_THROW( Invalid_File_Format );
goto Fail;
}
if ( FT_STREAM_SEEK( start_pos ) ||
FT_ALLOC( parser->private_dict, parser->private_len ) )
goto Fail;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error || tag != 0x8002U )
{
error = FT_Err_Ok;
break;
}
if ( FT_STREAM_READ( parser->private_dict + parser->private_len,
size ) )
goto Fail;
parser->private_len += size;
}
}
else
{
/* We have already `loaded' the whole PFA font file into memory; */
/* if this is a memory resource, allocate a new block to hold */
/* the private dict. Otherwise, simply overwrite into the base */
/* dictionary block in the heap. */
/* first of all, look at the `eexec' keyword */
FT_Byte* cur = parser->base_dict;
FT_Byte* limit = cur + parser->base_len;
FT_Byte c;
Again:
for (;;)
{
c = cur[0];
if ( c == 'e' && cur + 9 < limit ) /* 9 = 5 letters for `eexec' + */
/* whitespace + 4 chars */
{
if ( cur[1] == 'e' &&
cur[2] == 'x' &&
cur[3] == 'e' &&
cur[4] == 'c' )
break;
}
cur++;
if ( cur >= limit )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" could not find `eexec' keyword\n" ));
error = FT_THROW( Invalid_File_Format );
goto Exit;
}
//.........这里部分代码省略.........
开发者ID:PrinttingGroup，项目名称:SumatraPDF_SpecialPrint，代码行数:101，代码来源:t1parse.c
示例9: T1_New_Parser
T1_New_Parser( T1_Parser parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux )
{
FT_Error error;
FT_UShort tag;
FT_ULong size;
psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );
parser->stream = stream;
parser->base_len = 0;
parser->base_dict = 0;
parser->private_len = 0;
parser->private_dict = 0;
parser->in_pfb = 0;
parser->in_memory = 0;
parser->single_block = 0;
/* check the header format */
error = check_type1_format( stream, "%!PS-AdobeFont", 14 );
if ( error )
{
if ( FT_ERR_NEQ( error, Unknown_File_Format ) )
goto Exit;
error = check_type1_format( stream, "%!FontType", 10 );
if ( error )
{
FT_TRACE2(( " not a Type 1 font\n" ));
goto Exit;
}
}
/******************************************************************/
/* */
/* Here a short summary of what is going on: */
/* */
/* When creating a new Type 1 parser, we try to locate and load */
/* the base dictionary if this is possible (i.e., for PFB */
/* files). Otherwise, we load the whole font into memory. */
/* */
/* When `loading' the base dictionary, we only setup pointers */
/* in the case of a memory-based stream. Otherwise, we */
/* allocate and load the base dictionary in it. */
/* */
/* parser->in_pfb is set if we are in a binary (`.pfb') font. */
/* parser->in_memory is set if we have a memory stream. */
/* */
/* try to compute the size of the base dictionary; */
/* look for a Postscript binary file tag, i.e., 0x8001 */
if ( FT_STREAM_SEEK( 0L ) )
goto Exit;
error = read_pfb_tag( stream, &tag, &size );
if ( error )
goto Exit;
if ( tag != 0x8001U )
{
/* assume that this is a PFA file for now; an error will */
/* be produced later when more things are checked */
if ( FT_STREAM_SEEK( 0L ) )
goto Exit;
size = stream->size;
}
else
parser->in_pfb = 1;
/* now, try to load `size' bytes of the `base' dictionary we */
/* found previously */
/* if it is a memory-based resource, set up pointers */
if ( !stream->read )
{
parser->base_dict = (FT_Byte*)stream->base + stream->pos;
parser->base_len = size;
parser->in_memory = 1;
/* check that the `size' field is valid */
if ( FT_STREAM_SKIP( size ) )
goto Exit;
}
else
{
/* read segment in memory -- this is clumsy, but so does the format */
if ( FT_ALLOC( parser->base_dict, size ) ||
FT_STREAM_READ( parser->base_dict, size ) )
goto Exit;
parser->base_len = size;
}
parser->root.base = parser->base_dict;
parser->root.cursor = parser->base_dict;
parser->root.limit = parser->root.cursor + parser->base_len;
Exit:
//.........这里部分代码省略.........
开发者ID:PrinttingGroup，项目名称:SumatraPDF_SpecialPrint，代码行数:101，代码来源:t1parse.c
示例10: ft_gzip_check_header
/* check and skip .gz header - we don't support `transparent' compression */
static FT_Error
ft_gzip_check_header( FT_Stream stream )
{
FT_Error error;
FT_Byte head[4];
if ( FT_STREAM_SEEK( 0 ) ||
FT_STREAM_READ( head, 4 ) )
goto Exit;
/* head[0] && head[1] are the magic numbers; */
/* head[2] is the method, and head[3] the flags */
if ( head[0] != 0x1f ||
head[1] != 0x8b ||
head[2] != Z_DEFLATED ||
(head[3] & FT_GZIP_RESERVED) )
{
error = Gzip_Err_Invalid_File_Format;
goto Exit;
}
/* skip time, xflags and os code */
(void)FT_STREAM_SKIP( 6 );
/* skip the extra field */
if ( head[3] & FT_GZIP_EXTRA_FIELD )
{
FT_UInt len;
if ( FT_READ_USHORT_LE( len ) ||
FT_STREAM_SKIP( len ) )
goto Exit;
}
/* skip original file name */
if ( head[3] & FT_GZIP_ORIG_NAME )
for (;;)
{
FT_UInt c;
if ( FT_READ_BYTE( c ) )
goto Exit;
if ( c == 0 )
break;
}
/* skip .gz comment */
if ( head[3] & FT_GZIP_COMMENT )
for (;;)
{
FT_UInt c;
if ( FT_READ_BYTE( c ) )
goto Exit;
if ( c == 0 )
break;
}
/* skip CRC */
if ( head[3] & FT_GZIP_HEAD_CRC )
if ( FT_STREAM_SKIP( 2 ) )
goto Exit;
Exit:
return error;
}
开发者ID:bowlofstew，项目名称:Aquaria，代码行数:73，代码来源:ftgzip.c
示例11: t42_parser_init
t42_parser_init( T42_Parser parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux )
{
FT_Error error = FT_Err_Ok;
FT_Long size;
psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );
parser->stream = stream;
parser->base_len = 0;
parser->base_dict = 0;
parser->in_memory = 0;
/*******************************************************************/
/* */
/* Here a short summary of what is going on: */
/* */
/* When creating a new Type 42 parser, we try to locate and load */
/* the base dictionary, loading the whole font into memory. */
/* */
/* When `loading' the base dictionary, we only set up pointers */
/* in the case of a memory-based stream. Otherwise, we allocate */
/* and load the base dictionary in it. */
/* */
/* parser->in_memory is set if we have a memory stream. */
/* */
if ( FT_STREAM_SEEK( 0L ) ||
FT_FRAME_ENTER( 17 ) )
goto Exit;
if ( ft_memcmp( stream->cursor, "%!PS-TrueTypeFont", 17 ) != 0 )
{
FT_TRACE2(( " not a Type42 font\n" ));
error = FT_THROW( Unknown_File_Format );
}
FT_FRAME_EXIT();
if ( error || FT_STREAM_SEEK( 0 ) )
goto Exit;
size = stream->size;
/* now, try to load `size' bytes of the `base' dictionary we */
/* found previously */
/* if it is a memory-based resource, set up pointers */
if ( !stream->read )
{
parser->base_dict = (FT_Byte*)stream->base + stream->pos;
parser->base_len = size;
parser->in_memory = 1;
/* check that the `size' field is valid */
if ( FT_STREAM_SKIP( size ) )
goto Exit;
}
else
{
/* read segment in memory */
if ( FT_ALLOC( parser->base_dict, size ) ||
FT_STREAM_READ( parser->base_dict, size ) )
goto Exit;
parser->base_len = size;
}
parser->root.base = parser->base_dict;
parser->root.cursor = parser->base_dict;
parser->root.limit = parser->root.cursor + parser->base_len;
Exit:
if ( error && !parser->in_memory )
FT_FREE( parser->base_dict );
return error;
}
开发者ID:03050903，项目名称:libgdx，代码行数:81，代码来源:t42parse.hpp
示例12: cff_new_index
static FT_Error
cff_new_index( CFF_Index idx,
FT_Stream stream,
FT_Bool load )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_UShort count;
FT_MEM_ZERO( idx, sizeof ( *idx ) );
idx->stream = stream;
if ( !FT_READ_USHORT( count ) &&
count > 0 )
{
FT_Byte* p;
FT_Byte offsize;
FT_ULong data_size;
FT_ULong* poff;
/* there is at least one element; read the offset size, */
/* then access the offset table to compute the index's total size */
if ( FT_READ_BYTE( offsize ) )
goto Exit;
idx->stream = stream;
idx->count = count;
idx->off_size = offsize;
data_size = (FT_ULong)( count + 1 ) * offsize;
if ( FT_NEW_ARRAY( idx->offsets, count + 1 ) ||
FT_FRAME_ENTER( data_size ) )
goto Exit;
poff = idx->offsets;
p = (FT_Byte*)stream->cursor;
for ( ; (FT_Short)count >= 0; count-- )
{
poff[0] = cff_get_offset( p, offsize );
poff++;
p += offsize;
}
FT_FRAME_EXIT();
idx->data_offset = FT_STREAM_POS();
data_size = poff[-1] - 1;
if ( load )
{
/* load the data */
if ( FT_FRAME_EXTRACT( data_size, idx->bytes ) )
goto Exit;
}
else
{
/* skip the data */
if ( FT_STREAM_SKIP( data_size ) )
goto Exit;
}
}
Exit:
if ( error )
FT_FREE( idx->offsets );
return error;
}
开发者ID:OS2World，项目名称:LIB-SDL，代码行数:71，代码来源:cffload.c
示例13: pcf_get_properties
static FT_Error
pcf_get_properties( FT_Stream stream,
PCF_Face face )
{
PCF_ParseProperty props = 0;
PCF_Property properties;
FT_UInt nprops, i;
FT_ULong format, size;
FT_Error error;
FT_Memory memory = FT_FACE(face)->memory;
FT_ULong string_size;
FT_String* strings = 0;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_PROPERTIES,
&format,
&size );
if ( error )
goto Bail;
if ( FT_READ_ULONG_LE( format ) )
goto Bail;
FT_TRACE4(( "pcf_get_properties:\n" ));
FT_TRACE4(( " format = %ld\n", format ));
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
goto Bail;
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( nprops );
else
(void)FT_READ_ULONG_LE( nprops );
if ( error )
goto Bail;
FT_TRACE4(( " nprop = %d\n", nprops ));
/* rough estimate */
if ( nprops > size / PCF_PROPERTY_SIZE )
{
error = PCF_Err_Invalid_Table;
goto Bail;
}
face->nprops = nprops;
if ( FT_NEW_ARRAY( props, nprops ) )
goto Bail;
for ( i = 0; i < nprops; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
{
if ( FT_STREAM_READ_FIELDS( pcf_property_msb_header, props + i ) )
goto Bail;
}
else
{
if ( FT_STREAM_READ_FIELDS( pcf_property_header, props + i ) )
goto Bail;
}
}
/* pad the property array */
/* */
/* clever here - nprops is the same as the number of odd-units read, */
/* as only isStringProp are odd length (Keith Packard) */
/* */
if ( nprops & 3 )
{
i = 4 - ( nprops & 3 );
if ( FT_STREAM_SKIP( i ) )
{
error = PCF_Err_Invalid_Stream_Skip;
goto Bail;
}
}
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( string_size );
else
(void)FT_READ_ULONG_LE( string_size );
if ( error )
goto Bail;
FT_TRACE4(( " string_size = %ld\n", string_size ));
/* rough estimate */
if ( string_size > size - nprops * PCF_PROPERTY_SIZE )
{
error = PCF_Err_Invalid_Table;
goto Bail;
}
if ( FT_NEW_ARRAY( strings, string_size ) )
//.........这里部分代码省略.........
开发者ID:4nakin，项目名称:Aquaria_clean，代码行数:101，代码来源:pcfread.c
示例14: _tt_face_check_patents
static FT_Bool
_tt_face_check_patents( FT_Face face )
{
FT_Stream stream = face->stream;
FT_UInt gindex;
FT_Error error;
FT_Bool result;
FT_Service_TTGlyf service;
result = _tt_check_patents_in_table( face, TTAG_fpgm );
if ( result )
goto Exit;
result = _tt_check_patents_in_table( face, TTAG_prep );
if ( result )
goto Exit;
FT_FACE_FIND_SERVICE( face, service, TT_GLYF );
if ( service == NULL )
goto Exit;
for ( gindex = 0; gindex < (FT_UInt)face->num_glyphs; gindex++ )
{
FT_ULong offset, num_ins, size;
FT_Int num_contours;
offset = service->get_location( face, gindex, &size );
if ( size == 0 )
continue;
if ( FT_STREAM_SEEK( offset ) ||
FT_READ_SHORT( num_contours ) )
continue;
if ( num_contours >= 0 ) /* simple glyph */
{
if ( FT_STREAM_SKIP( 8 + num_contours * 2 ) )
continue;
}
else /* compound glyph */
{
FT_Bool has_instr = 0;
if ( FT_STREAM_SKIP( 8 ) )
continue;
/* now read each component */
for (;;)
{
FT_UInt flags, toskip;
if( FT_READ_USHORT( flags ) )
break;
toskip = 2 + 1 + 1;
if ( ( flags & ( 1 << 0 ) ) != 0 ) /* ARGS_ARE_WORDS */
toskip += 2;
if ( ( flags & ( 1 << 3 ) ) != 0 ) /* WE_HAVE_A_SCALE */
toskip += 2;
else if ( ( flags & ( 1 << 6 ) ) != 0 ) /* WE_HAVE_X_Y_SCALE */
toskip += 4;
else if ( ( flags & ( 1 << 7 ) ) != 0 ) /* WE_HAVE_A_2x2 */
toskip += 8;
if ( ( flags & ( 1 << 8 ) ) != 0 ) /* WE_HAVE_INSTRUCTIONS */
has_instr = 1;
if ( FT_STREAM_SKIP( toskip ) )
goto NextGlyph;
if ( ( flags & ( 1 << 5 ) ) == 0 ) /* MORE_COMPONENTS */
break;
}
if ( !has_instr )
goto NextGlyph;
}
if ( FT_READ_USHORT( num_ins ) )
continue;
result = _tt_check_patents_in_range( stream, num_ins );
if ( result )
goto Exit;
NextGlyph:
;
}
Exit:
return result;
}
开发者ID:sheldonrobinson，项目名称:VcXsrv，代码行数:99，代码来源:ftpatent.c
示例15: T1_Get_Private_Dict
T1_Get_Private_Dict( T1_Parser parser,
PSAux_Service psaux )
{
FT_Stream stream = parser->stream;
FT_Memory memory = parser->root.memory;
FT_Error error = 0;
FT_Long size;
if ( parser->in_pfb )
{
/* in the case of the PFB format, the private dictionary can be */
/* made of several segments. We thus first read the number of */
/* segments to compute the total size of the private dictionary */
/* then re-read them into memory. */
FT_Long start_pos = FT_STREAM_POS();
FT_UShort tag;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error )
goto Fail;
if ( tag != 0x8002U )
break;
parser->private_len += size;
if ( FT_STREAM_SKIP( size ) )
goto Fail;
}
/* Check that we have a private dictionary there */
/* and allocate private dictionary buffer */
if ( parser->private_len == 0 )
{
FT_ERROR(( "T1_Get_Private_Dict:" ));
FT_ERROR(( " invalid private dictionary section\n" ));
error = T1_Err_Invalid_File_Format;
goto Fail;
}
if ( FT_STREAM_SEEK( start_pos ) ||
FT_ALLOC( parser->private_dict, parser->private_len ) )
goto Fail;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error || tag != 0x8002U )
{
error = T1_Err_Ok;
break;
}
if ( FT_STREAM_READ( parser->private_dict + parser->private_len, size ) )
goto Fail;
parser->private_len += size;
}
}
else
{
/* we have already `loaded' the whole PFA font file into memory; */
/* if this is a memory resource, allocate a new block to hold */
/* the private dict. Otherwise, simply overwrite into the base */
/* dictionary block in the heap. */
/* first of all, look at the `eexec' keyword */
FT_Byte* cur = parser->base_dict;
FT_Byte* limit = cur + parser->base_len;
FT_Byte c;
for (;;)
{
c = cur[0];
if ( c == 'e' && cur + 9 < limit ) /* 9 = 5 letters for `eexec' + */
/* newline + 4 chars */
{
if ( cur[1] == 'e' && cur[2] == 'x' &&
cur[3] == 'e' && cur[4] == 'c' )
{
cur += 6; /* we skip the newling after the `eexec' */
/* XXX: Some fonts use DOS-linefeeds, i.e. \r\n; we need to */
/* skip the extra \n if we find it */
if ( cur[0] == '\n' )
cur++;
break;
}
}
cur++;
if ( cur >= limit )
{
//.........这里部分代码省略.........
开发者ID:8l，项目名称:inferno，代码行数:101，代码来源:t1parse.c
示例16: TT_CharMap_Load
//.........这里部分代码省略.........
cmap6->language = FT_GET_USHORT();
cmap6->firstCode = FT_GET_USHORT();
cmap6->entryCount = FT_GET_USHORT();
FT_FRAME_EXIT();
l = cmap6->entryCount;
if ( FT_NEW_ARRAY( cmap6->glyphIdArray, l ) ||
FT_FRAME_ENTER( l * 2L ) )
goto Fail;
for ( i = 0; i < l; i++ )
cmap6->glyphIdArray[i] = FT_GET_USHORT();
FT_FRAME_EXIT();
cmap->get_index = code_to_index6;
cmap->get_next_char = code_to_next6;
break;
case 8:
case 12:
cmap8_12 = &cmap->c.cmap8_12;
if ( FT_FRAME_ENTER( 8L ) )
goto Fail;
cmap->length = FT_GET_ULONG();
cmap8_12->language = FT_GET_ULONG();
FT_FRAME_EXIT();
if ( cmap->format == 8 )
if ( FT_STREAM_SKIP( 8192L ) )
goto Fail;
if ( FT_READ_ULONG( cmap8_12->nGroups ) )
goto Fail;
n = cmap8_12->nGroups;
if ( FT_NEW_ARRAY( cmap8_12->groups, n ) ||
FT_FRAME_ENTER( n * 3 * 4L ) )
goto Fail;
groups = cmap8_12->groups;
for ( j = 0; j < n; j++ )
{
groups[j].startCharCode = FT_GET_ULONG();
groups[j].endCharCode = FT_GET_ULONG();
groups[j].startGlyphID = FT_GET_ULONG();
}
FT_FRAME_EXIT();
cmap8_12->last_group = cmap8_12->groups;
cmap->get_index = code_to_index8_12;
cmap->get_next_char = code_to_next8_12;
break;
case 10:
cmap10 = &cmap->c.cmap10;
if ( FT_FRAME_ENTER( 16L ) )
开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:67，代码来源:ttcmap.c
注：本文中的FT_STREAM_SKIP函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论