本文整理汇总了C++中FT_Close函数的典型用法代码示例。如果您正苦于以下问题：C++ FT_Close函数的具体用法？C++ FT_Close怎么用？C++ FT_Close使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了FT_Close函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: main
int main(int argc, char *argv[])
{
unsigned char * pucUAdata;
DWORD dwUASize, dwUARead;
FILE * fp;
FT_HANDLE ftHandle0;
FT_STATUS ftStatus;
int iport;
if(argc > 1) {
sscanf(argv[1], "%d", &iport);
}
else {
iport = 0;
}
printf("opening port %d\n", iport);
ftStatus = FT_Open(iport, &ftHandle0);
if(ftStatus == FT_OK) {
printf("ftHandle0 = %p\n", ftHandle0);
}
else {
/*
This can fail if the ftdi_sio driver is loaded
use lsmod to check this and rmmod ftdi_sio to remove
also rmmod usbserial
*/
printf("FT_Open(%d) failed\n", iport);
return 1;
}
ftStatus = FT_EE_UASize(ftHandle0, &dwUASize);
if(ftStatus == FT_OK)
printf("dwUASize = %d\n", (int)dwUASize);
else {
printf("Could not read UA size\n");
FT_Close(ftHandle0);
return 1;
}
pucUAdata = (unsigned char *)malloc(dwUASize);
if(pucUAdata == NULL) {
printf("Out of resources\n");
FT_Close(ftHandle0);
return 1;
}
ftStatus = FT_EE_UARead(ftHandle0, pucUAdata, dwUASize, &dwUARead);
if(ftStatus == FT_OK) {
fp = fopen("UA_DATA.bin", "w+");
fwrite(pucUAdata, 1, dwUARead, fp);
fclose(fp);
}
else{
printf("could not read UA\n");
}
free(pucUAdata);
FT_Close(ftHandle0);
return 0;
}
开发者ID:0x6a77，项目名称:JD2XX，代码行数:59，代码来源:main.c
示例2: main
int main(void)
{
FT_HANDLE FT_handle; // handle to FT 232 chip
FT_STATUS FT_status; // status of the FT 232 chip
UCHAR Mask; // for selecting which pins are input/output
UCHAR Mode; // Selects the mode of operation for the chip
UCHAR UpperNibble_Direction; //whether port is input/output
UCHAR LowerNibble_Data; // 4 bit data to be sent
UpperNibble_Direction = 0xF0; // setting the direction nibble
LowerNibble_Data = 0x0F; // setting the data nibble
Mask = UpperNibble_Direction | LowerNibble_Data;//OR'ing
FT_status = FT_Open(0,&FT_handle); // Open a connection to FT232RL
Mode = 0x20; // Select Chip mode as CBUS Bit Bang
FT_status = FT_SetBitMode(FT_handle,Mask,Mode); // Opening Bit Bang Mode
getchar();
Mode = 0x00; // Reset the chip
Mask = 0x00; //
FT_status = FT_SetBitMode(FT_handle,Mask,Mode); //Bring back the chip to default mode
FT_Close(FT_handle);//Close the connection
}
开发者ID:xanthium-enterprises，项目名称:FT232-D2XX-Library-Programming，代码行数:29，代码来源:CBUS_bbm.c
示例3: nifalcon_close
int nifalcon_close(falcon_device* dev)
{
if(!dev->is_open) nifalcon_error_return(NIFALCON_DEVICE_NOT_FOUND_ERROR, "tried to close an unopened device");
dev->is_open = 0;
FT_Close(dev->falcon);
return 0;
}
开发者ID:kouellet，项目名称:libnifalcon，代码行数:7，代码来源:nifalcon_ftd2xx.c
示例4: ublast_ftd2xx_quit
static int ublast_ftd2xx_quit(struct ublast_lowlevel *low)
{
FT_HANDLE *ftdih = ublast_getftdih(low);
FT_Close(*ftdih);
return ERROR_OK;
}
开发者ID:Bot007，项目名称:openOCD，代码行数:7，代码来源:ublast_access_ftd2xx.c
示例5: gecko_opendevice
int gecko_opendevice()
{
// Open by Serial Number
status = FT_OpenEx("GECKUSB0", FT_OPEN_BY_SERIAL_NUMBER, &fthandle);
if(status != FT_OK){
eprintf("Error: Couldn't connect to USB Gecko. Please check Installation\n");
return 0;
}
// Reset the Device
status = FT_ResetDevice(fthandle);
if(status != FT_OK){
eprintf("Error: Couldnt Reset Device %d\n",status);
status = FT_Close(fthandle);
return 0;
}
// Set a 3 second timeout for this example
status = FT_SetTimeouts(fthandle,3000,3000);
if(status != FT_OK){
eprintf("Error: Timeouts failed to set %d\n",status);
status = FT_Close(fthandle);
return 0;
}
// Purge RX buffer
status = FT_Purge(fthandle,FT_PURGE_RX);
if(status != FT_OK){
eprintf("Error: Problem clearing buffers %d\n",status);
status = FT_Close(fthandle);
return 0;
}
// Purge TX buffer
status = FT_Purge(fthandle,FT_PURGE_TX);
if(status != FT_OK){
eprintf("Error: Problem clearing buffers %d\n",status);
status = FT_Close(fthandle);
return 0;
}
// Set packet size in bytes - 65536 packet is maximum packet size (USB 2.0)
status = FT_SetUSBParameters(fthandle,65536,0);
if(status != FT_OK){
eprintf("Error: Couldnt Set USB Parameters %d\n",status);
status = FT_Close(fthandle);
return 0;
}
// take breath
sleep(1);
return 1;
}
开发者ID:111X，项目名称:radare，代码行数:47，代码来源:libgecko.c
示例6: dxl_hal_close
void dxl_hal_close()
{
if( ghFt_Handle != 0 )
{
FT_Close( ghFt_Handle );
ghFt_Handle = 0;
}
}
开发者ID:DavidJohan，项目名称:Assemble-and-Animate，代码行数:8，代码来源:dxl_hal.c
示例7: FT_Close
VOID CDriverInterface::Cleanup()
{
if (m_FTHandle)
{
FT_Close(m_FTHandle);
m_FTHandle = NULL;
}
}
开发者ID:BastilleNetworks，项目名称:LimeSuite，代码行数:8，代码来源:DRV_DriverInterface.cpp
示例8: pm_close
/**
Close a power meter probe
\param pm a pointer to a pm_context
\retval 0 - all fine
\retval -1 - invalid pm_context
*/
PM600X_EXPORT int pm_close(struct pm_context *pm)
{
if (!pm->handle)
pm_error_return(-1, "invalid pm_context");
FT_Close(pm->handle);
return pm_init(pm);
}
开发者ID:bitwigglers，项目名称:lib-pm600x，代码行数:17，代码来源:libpm600x.c
示例9: Java_kinetic_Kinetic1090Puck_puckClose
/*
* Class: kinetic_Kinetic1090Puck
* Method: puckClose
* Signature: ()I
*/
JNIEXPORT jint JNICALL Java_kinetic_Kinetic1090Puck_puckClose(JNIEnv * env, jobject obj)
{
FT_STATUS ftStatus = FT_Close(ftHandle);
if (ftStatus != FT_OK) {
return -1;
}
return 0;
}
开发者ID:n12365，项目名称:adsb，代码行数:14，代码来源:kinetic_Kinetic1090Puck.c
示例10: QString
QString FTD2XXInterface::readLabel(uchar label, int *ESTA_code)
{
FT_HANDLE ftdi = NULL;
if (FT_Open(id(), &ftdi) != FT_OK)
return QString();
if(FT_ResetDevice(ftdi) != FT_OK)
return QString();
if(FT_SetBaudRate(ftdi, 250000) != FT_OK)
return QString();
if(FT_SetDataCharacteristics(ftdi, FT_BITS_8, FT_STOP_BITS_2, FT_PARITY_NONE) != FT_OK)
return QString();
if(FT_SetFlowControl(ftdi, 0, 0, 0) != FT_OK)
return QString();
QByteArray request;
request.append(ENTTEC_PRO_START_OF_MSG);
request.append(label);
request.append(ENTTEC_PRO_DMX_ZERO); // data length LSB
request.append(ENTTEC_PRO_DMX_ZERO); // data length MSB
request.append(ENTTEC_PRO_END_OF_MSG);
DWORD written = 0;
if (FT_Write(ftdi, (char*) request.data(), request.size(), &written) != FT_OK)
return QString();
if (written == 0)
{
qDebug() << Q_FUNC_INFO << "Cannot write data to device";
return QString();
}
uchar* buffer = (uchar*) malloc(sizeof(uchar) * 40);
Q_ASSERT(buffer != NULL);
int read = 0;
QByteArray array;
FT_SetTimeouts(ftdi, 500,0);
FT_Read(ftdi, buffer, 40, (LPDWORD) &read);
qDebug() << Q_FUNC_INFO << "----- Read: " << read << " ------";
for (int i = 0; i < read; i++)
array.append((char) buffer[i]);
if (array[0] != ENTTEC_PRO_START_OF_MSG)
qDebug() << Q_FUNC_INFO << "Reply message wrong start code: " << QString::number(array[0], 16);
*ESTA_code = (array[5] << 8) | array[4];
array.remove(0, 6); // 4 bytes of Enttec protocol + 2 of ESTA ID
array.replace(ENTTEC_PRO_END_OF_MSG, '\0'); // replace Enttec termination with string termination
FT_Close(ftdi);
return QString(array);
}
开发者ID:enbyted，项目名称:qlcplus，代码行数:56，代码来源:ftd2xx-interface.cpp
示例11: serial_close
static void
serial_close ()
{
ProgramMode (0);
Reset (1);
/* >3 mSec reset pulse */
usleep(3*1000);
Reset (0);
FT_Close (handle);
}
开发者ID:GBert，项目名称:openwrt-misc，代码行数:10，代码来源:d2xx.c
示例12: FT_Close
Dynamixel::~Dynamixel(){
if(initialized_){
FT_STATUS ftStatus = FT_Close(ftHandleDYNA_);
if (ftStatus != FT_OK){
emit failedToClose();
}else{
emit closed();
}
}
}
开发者ID:CreativeMachinesLab，项目名称:freeLoader，代码行数:10，代码来源:dynamixel.cpp
示例13: throw
bool FTDXXDevice::disconnect () throw ()
{
if (!_initialized) return false;
_initialized = false;
FTDLOG("Closing FTDI bus.");
#ifdef FOUND_ftd2xx
FT_Close(_handle);
FXXCHECK("Unable to close handle.");
#endif
return true;
}
开发者ID:cosmoharrigan，项目名称:clsquare，代码行数:11，代码来源:ftdxxdevice.cpp
示例14: FT_Close
int CKMotionIO::Disconnect()
{
Mutex->Lock();
m_Connected=false;
FT_Close(ftHandle);
Mutex->Unlock();
return 0;
}
开发者ID:tedenda，项目名称:KMotionX，代码行数:11，代码来源:KmotionIO.cpp
示例15: FT_SetBitMode
void TellStick::rebootTellStick() {
FT_STATUS ftStatus = FT_SetBitMode(d->ftHandle, 0xff, 0x20);
for (int i = 0; i < 100; ++i) {
msleep(1);
QApplication::processEvents();
}
ftStatus = FT_SetBitMode(d->ftHandle, 0xf0, 0x20);
FT_Close(d->ftHandle);
QApplication::processEvents();
setUpgradeStep(5);
QTimer::singleShot(0, this, SLOT(connectTellStick()));
}
开发者ID:nutrino，项目名称:telldus，代码行数:12，代码来源:tellstick.cpp
示例16: while
/*
This is the main reader thread - continually waits for a read
*/
void *read_watch(void *pArgs)
{
char buf[20];
DWORD dwRet;
FT_STATUS ftStatus;
while(exit_reader != 1) {
// printf("Write\n");
FT_Write(ftHandle, buf, 20, &dwRet);
// sleep(1);
}
FT_Close(ftHandle);
}
开发者ID:0x6a77，项目名称:JD2XX，代码行数:17，代码来源:main.c
示例17: main
int main(int argc, char *argv[])
{
DWORD dwBytesInQueue = 0;
EVENT_HANDLE eh;
FT_STATUS ftStatus;
FT_HANDLE ftHandle;
int iport;
if(argc > 1) {
sscanf(argv[1], "%d", &iport);
}
else {
iport = 0;
}
pthread_mutex_init(&eh.eMutex, NULL);
pthread_cond_init(&eh.eCondVar, NULL);
ftStatus = FT_Open(iport, &ftHandle);
if(ftStatus != FT_OK) {
/*
This can fail if the ftdi_sio driver is loaded
use lsmod to check this and rmmod ftdi_sio to remove
also rmmod usbserial
*/
printf("FT_Open(%d) failed\n", iport);
return 1;
}
ftStatus = FT_SetFlowControl(ftHandle, FT_FLOW_NONE, 0, 0);
if(ftStatus != FT_OK) {
printf("Failed to set flow control\n");
}
ftStatus = FT_SetEventNotification(ftHandle, FT_EVENT_RXCHAR, (PVOID)&eh);
if(ftStatus != FT_OK) {
printf("Failed to set events\n");
return 1;
}
pthread_mutex_lock(&eh.eMutex);
pthread_cond_wait(&eh.eCondVar, &eh.eMutex);
pthread_mutex_unlock(&eh.eMutex);
FT_GetQueueStatus(ftHandle, &dwBytesInQueue);
printf("Received chars %d bytes in queue\n", (int)dwBytesInQueue);
FT_Close(ftHandle);
return 0;
}
开发者ID:0x6a77，项目名称:JD2XX，代码行数:51，代码来源:main.c
示例18: presto_close
static int presto_close(void)
{
int result = ERROR_OK;
#if BUILD_PRESTO_FTD2XX == 1
DWORD ftbytes;
if (presto->handle == (FT_HANDLE)INVALID_HANDLE_VALUE)
return result;
presto->status = FT_Purge(presto->handle, FT_PURGE_TX | FT_PURGE_RX);
if (presto->status != FT_OK)
result = ERROR_JTAG_DEVICE_ERROR;
presto->status = FT_Write(presto->handle,
&presto_init_seq,
sizeof(presto_init_seq),
&ftbytes);
if (presto->status != FT_OK || ftbytes != sizeof(presto_init_seq))
result = ERROR_JTAG_DEVICE_ERROR;
presto->status = FT_SetLatencyTimer(presto->handle, 16);
if (presto->status != FT_OK)
result = ERROR_JTAG_DEVICE_ERROR;
presto->status = FT_Close(presto->handle);
if (presto->status != FT_OK)
result = ERROR_JTAG_DEVICE_ERROR;
else
presto->handle = (FT_HANDLE)INVALID_HANDLE_VALUE;
#elif BUILD_PRESTO_LIBFTDI == 1
presto->retval = ftdi_write_data(&presto->ftdic, presto_init_seq, sizeof(presto_init_seq));
if (presto->retval != sizeof(presto_init_seq))
result = ERROR_JTAG_DEVICE_ERROR;
presto->retval = ftdi_set_latency_timer(&presto->ftdic, 16);
if (presto->retval < 0)
result = ERROR_JTAG_DEVICE_ERROR;
presto->retval = ftdi_usb_close(&presto->ftdic);
if (presto->retval < 0)
result = ERROR_JTAG_DEVICE_ERROR;
else
ftdi_deinit(&presto->ftdic);
#endif
return result;
}
开发者ID:01org，项目名称:CODK-A-Flashpack，代码行数:51，代码来源:presto.c
示例19: gecko_sendbyte
int gecko_sendbyte(unsigned char Textbyte)
{
unsigned int ret = 0;
ret = gecko_writebyte(&cmd_sendbyte, 1, &TxSent);
if(ret == 0 || ret == 2) {
eprintf("Couldn't send the command to console, check DOL is loaded and connection\n");
status = FT_Close(fthandle);
return 0;
}
gecko_writebyte(&Testbyte, 1, &TxSent); // Send byte
return 1;
}
开发者ID:111X，项目名称:radare，代码行数:14，代码来源:libgecko.c
示例20: main
int main(int argc, char *argv[])
{
char * pcBufRead;
DWORD dwBytesRead;
FILE * fh;
FT_HANDLE ftHandle;
FT_STATUS ftStatus;
int iport;
if(argc > 1) {
sscanf(argv[1], "%d", &iport);
}
else {
iport = 0;
}
fh = fopen("target.bin", "wb+");
if(fh == NULL) {
printf("Cant open source file\n");
return 1;
}
ftStatus = FT_Open(iport, &ftHandle);
if(ftStatus != FT_OK) {
/*
This can fail if the ftdi_sio driver is loaded
use lsmod to check this and rmmod ftdi_sio to remove
also rmmod usbserial
*/
printf("FT_Open(%d) failed\n", iport);
return 1;
}
pcBufRead = (char *)malloc(BUF_SIZE);
FT_ResetDevice(ftHandle);
FT_SetBaudRate(ftHandle, 115200);
FT_SetDtr(ftHandle);
FT_SetRts(ftHandle);
FT_SetFlowControl(ftHandle, FT_FLOW_RTS_CTS, 0, 0);
FT_SetTimeouts(ftHandle, 0, 0); // infinite timeouts
FT_SetBitMode(ftHandle, 0xFF, 0x01);
FT_Read(ftHandle, pcBufRead, BUF_SIZE, &dwBytesRead);
fwrite(pcBufRead, 1, dwBytesRead, fh);
fclose(fh);
free(pcBufRead);
FT_Close(ftHandle);
return 0;
}
开发者ID:0x6a77，项目名称:JD2XX，代码行数:50，代码来源:main.c
注：本文中的FT_Close函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论