C++ FSMC_NORSRAMInit函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FSMC_NORSRAMInit函数的典型用法代码示例。如果您正苦于以下问题：C++ FSMC_NORSRAMInit函数的具体用法？C++ FSMC_NORSRAMInit怎么用？C++ FSMC_NORSRAMInit使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FSMC_NORSRAMInit函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: lcd_fsmc_nor_mux_config

static void lcd_fsmc_nor_mux_config(void)
{
	FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
	FSMC_NORSRAMTimingInitTypeDef  Timing_read,Timing_write;

	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &Timing_read;
	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &Timing_write;
	FSMC_NORSRAMStructInit(&FSMC_NORSRAMInitStructure);
#if 0
	/* ssd1289 */
	Timing_read.FSMC_AddressSetupTime = 8;             /* 地址建立时间  */
	Timing_read.FSMC_AddressHoldTime  = 8;             /* 地址保持时间  */
	Timing_read.FSMC_DataSetupTime = 8;                /* 数据建立时间  */
	Timing_read.FSMC_AccessMode = FSMC_AccessMode_A;    /* FSMC 访问模式 */

	Timing_write.FSMC_AddressSetupTime = 8;             /* 地址建立时间  */
	Timing_write.FSMC_AddressHoldTime  = 8;             /* 地址保持时间  */
	Timing_write.FSMC_DataSetupTime = 8;                /* 数据建立时间  */
	Timing_write.FSMC_AccessMode = FSMC_AccessMode_A;   /* FSMC 访问模式 */
#else
	/* ili9320 */
	Timing_read.FSMC_AddressSetupTime = 3;             /* 地址建立时间  */
	Timing_read.FSMC_AddressHoldTime  = 8;             /* 地址保持时间  */
	Timing_read.FSMC_DataSetupTime = 4;                /* 数据建立时间  */
	Timing_read.FSMC_AccessMode = FSMC_AccessMode_A;    /* FSMC 访问模式 */

	Timing_write.FSMC_AddressSetupTime = 2;             /* 地址建立时间  */
	Timing_write.FSMC_AddressHoldTime  = 8;             /* 地址保持时间  */
	Timing_write.FSMC_DataSetupTime = 3;                /* 数据建立时间  */
	Timing_write.FSMC_AccessMode = FSMC_AccessMode_A;   /* FSMC 访问模式 */
#endif

	/* Color LCD configuration ------------------------------------
	LCD configured as follow:
	- Data/Address MUX = Disable
	- Memory Type = SRAM
	- Data Width = 16bit
	- Write Operation = Enable
	- Extended Mode = Enable
	- Asynchronous Wait = Disable */
	/* Bank1 4*64MiB 0x60000000 -- 0x6fffffff
	 *	ne1 -- 0x60000000 -- 0x63ffffff
	 */
	FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM1;
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Enable;
	FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
	FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
	FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Enable;
	FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;

	FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:malooei，项目名称:yeejoin-workspace，代码行数:60，代码来源:board.c

示例2: LCD_FSMCConf

void LCD_FSMCConf(void)
{
  	FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
  	FSMC_NORSRAMTimingInitTypeDef  p;

  	RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE);
  	p.FSMC_AddressSetupTime = 5;
  	p.FSMC_AddressHoldTime = 0;
  	p.FSMC_DataSetupTime = 9;
  	p.FSMC_BusTurnAroundDuration = 0;
  	p.FSMC_CLKDivision = 0;
  	p.FSMC_DataLatency = 0;
  	p.FSMC_AccessMode = FSMC_AccessMode_A;
  	FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM1;
  	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
  	FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
  	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
  	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
  	FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
  	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
  	FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
  	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
  	FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
  	FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
  	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
  	FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
  	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
  	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
  	FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);   
  	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:jwfjia123，项目名称:stm32-SD-，代码行数:31，代码来源:lcd.c

示例3: LCD_FSMC_Config

void LCD_FSMC_Config(void)
{
  FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
  FSMC_NORSRAMTimingInitTypeDef  p;
   
  p.FSMC_AddressSetupTime = 0x04;	        //地址建立时间
    p.FSMC_AddressHoldTime = 0x04;	        //地址保持时间
    p.FSMC_DataSetupTime = 0x04;		//数据建立时间
    p.FSMC_BusTurnAroundDuration = 0x00;
    p.FSMC_CLKDivision = 0x00;
    p.FSMC_DataLatency = 0x00;
    p.FSMC_AccessMode = FSMC_AccessMode_B;	 // 一般使用模式B来控制LCD   

    FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
    FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM1;
    FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
    FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
    FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
    FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
    FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
    FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
    FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; 
    
    FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); 
    
    /* Enable FSMC Bank1_SRAM Bank */
    FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:KaraRyougi，项目名称:ArithMax，代码行数:34，代码来源:stn.c

示例4: FSMC_LCD_Init

void FSMC_LCD_Init(void)
{
	FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure ;
	FSMC_NORSRAMTimingInitTypeDef p ;

	/* Configure FSMC Bank1 NOR/PSRAM */

	p.FSMC_AddressSetupTime = 0x02 ;
	p.FSMC_AddressHoldTime = 0x00 ;
	p.FSMC_DataSetupTime = 0x05 ;
	p.FSMC_BusTurnAroundDuration = 0x00 ;
	p.FSMC_CLKDivision = 0x00 ;
	p.FSMC_DataLatency = 0x00 ;
	p.FSMC_AccessMode = FSMC_AccessMode_B ;

	FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM1 ;
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable ;
	FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_NOR ;
	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b ;
	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable ;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low ;
	FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable ;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState ;
	FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable ;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable ;
	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable ;
	FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable ;
	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p ;
	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p ;

	FSMC_NORSRAMInit( &FSMC_NORSRAMInitStructure) ;

	/* Enable FSMC Bank1_SRAM Bank */
	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1 , ENABLE) ;
}

开发者ID:bionllo，项目名称:myarm，代码行数:35，代码来源:tft.c

示例5: lcd_fsmc_initialize

static void lcd_fsmc_initialize(void){
	
	FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
	FSMC_NORSRAMTimingInitTypeDef FSMC_NORSRAMTimingInitStructure;
	
	FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4;
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
	FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
	FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
	FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
	FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &FSMC_NORSRAMTimingInitStructure;
	//FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); 
	/* FSMC Write Timing */
	FSMC_NORSRAMTimingInitStructure.FSMC_AddressSetupTime = 15;   /* Address Setup Time */
	FSMC_NORSRAMTimingInitStructure.FSMC_AddressHoldTime = 0;
	FSMC_NORSRAMTimingInitStructure.FSMC_DataSetupTime = 15;	     /* Data Setup Time */
	FSMC_NORSRAMTimingInitStructure.FSMC_BusTurnAroundDuration = 0x00;
	FSMC_NORSRAMTimingInitStructure.FSMC_CLKDivision = 0x00;
	FSMC_NORSRAMTimingInitStructure.FSMC_DataLatency = 0x00;
	FSMC_NORSRAMTimingInitStructure.FSMC_AccessMode = FSMC_AccessMode_A;	/* FSMC Access Mode */
	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &FSMC_NORSRAMTimingInitStructure;
	
	FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
	
	/* Enable FSMC Bank4_SRAM Bank */
	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
}

开发者ID:bluelife85，项目名称:GermWarfare，代码行数:35，代码来源:lcd.c

示例6: SRAM_FSMC_Config

void SRAM_FSMC_Config(void)
{
  FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
  FSMC_NORSRAMTimingInitTypeDef  p;
   
  p.FSMC_AddressSetupTime = 1;  //这里我尝试改成5 6 也不对。
  p.FSMC_AddressHoldTime = 1;
  p.FSMC_DataSetupTime = 0;
  p.FSMC_BusTurnAroundDuration = 0; //这里我尝试不用扩展模式也不行
  p.FSMC_CLKDivision = 0;
  p.FSMC_DataLatency = 0;
  p.FSMC_AccessMode = FSMC_AccessMode_A;

  FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3;
  FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
  FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
  FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
  FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;  
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
  FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
  FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
  FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
  FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
  FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;

  FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);

FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE);  // 使能BANK3
}

开发者ID:CharlesEriri，项目名称:EPD-STM32，代码行数:33，代码来源:sram.c

示例7: FSMC_Configuration

/*** FSMC配置函数 ***/
static void FSMC_Configuration(void)
{
	FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
	FSMC_NORSRAMTimingInitTypeDef FSMC_NORSRAMTimingInitStructure;
	
	/*** FSMC Configuration：FSMC_Bank1_NORSRAM1 Configuration ***/
	FSMC_NORSRAMTimingInitStructure.FSMC_AddressSetupTime      = 0x02;			//地址建立时间（1 ~ 16个HCLK）
	FSMC_NORSRAMTimingInitStructure.FSMC_AddressHoldTime       = 0x00;			//地址保存时间（1 ~ 16个HCLK）
	FSMC_NORSRAMTimingInitStructure.FSMC_DataSetupTime         = 0x05;			//数据建立时间（0：保留，1：2个HCLK，0xFF：256个HCLK）
	FSMC_NORSRAMTimingInitStructure.FSMC_BusTurnAroundDuration = 0x00;			//总线恢复时间（1 ~ 16个HCLK）
	FSMC_NORSRAMTimingInitStructure.FSMC_CLKDivision           = 0x00;			//时钟分频比（定义CLK时钟输出信号的周期，0：保留，1-15表示1个CLK相当于2-16个HCLK）
	FSMC_NORSRAMTimingInitStructure.FSMC_DataLatency           = 0x00;			//数据保持时间（2 - 17个周期）
	FSMC_NORSRAMTimingInitStructure.FSMC_AccessMode            = FSMC_AccessMode_B;	//模式B（一共有4种模式：A，B，C，D）
	
	/*** Color LCD configuration ***/
	FSMC_NORSRAMInitStructure.FSMC_Bank                  = FSMC_Bank1_NORSRAM1;						//Bank1_NORSRAM1
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux        = FSMC_DataAddressMux_Disable;				//地址和数据复用失能
	FSMC_NORSRAMInitStructure.FSMC_MemoryType            = FSMC_MemoryType_NOR;						//连接到相应存储块的外部存储器类型
	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth       = FSMC_MemoryDataWidth_16b;				//存储器数据总线宽度16bit
	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode       = FSMC_BurstAccessMode_Disable;			//使能或关闭同步NOR闪存存储器的突发访问模式设置是否使用迸发访问模式
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity    = FSMC_WaitSignalPolarity_Low;				//设置WAIT信号的有效电平
	FSMC_NORSRAMInitStructure.FSMC_WrapMode              = FSMC_WrapMode_Disable;					//设置是否使用环回模式
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive      = FSMC_WaitSignalActive_BeforeWaitState;	//设置WAIT信号有效时机
	FSMC_NORSRAMInitStructure.FSMC_WriteOperation        = FSMC_WriteOperation_Enable;				//设定是否使能写操作
	FSMC_NORSRAMInitStructure.FSMC_WaitSignal            = FSMC_WaitSignal_Disable;					//设定是否使用WAIT信号
	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode          = FSMC_ExtendedMode_Disable;				//使能或关闭扩展模式，扩展模式用于访问具有不同读写操作时序的存储器，设定是否使用单独的写时序
	FSMC_NORSRAMInitStructure.FSMC_WriteBurst            = FSMC_WriteBurst_Disable;					//设定是否使用迸发写模式
	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &FSMC_NORSRAMTimingInitStructure;		//设定读写时序
	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct     = &FSMC_NORSRAMTimingInitStructure;		//设定读写时序
	FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);

	/*** Enable FSMC Bank1_SRAM Bank ****/
	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:12019，项目名称:stm32-camera，代码行数:35，代码来源:main.c

示例8: Dm9000a_FSMCConfig

void Dm9000a_FSMCConfig()
{
    FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
    FSMC_NORSRAMTimingInitTypeDef p;

    // DM9000A使用的地址（BANK1，BANK1有4个片选，DM9000A使用第4条片选）
    // 时序设置
    p.FSMC_AddressSetupTime = 1;
    p.FSMC_AddressHoldTime = 1;
    p.FSMC_DataSetupTime = 2;
    p.FSMC_BusTurnAroundDuration = 1;
    p.FSMC_CLKDivision = 1;
    p.FSMC_DataLatency = 1;
    p.FSMC_AccessMode = FSMC_AccessMode_A;
    // 工作模式
    FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4;
    FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
    FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_PSRAM;
    FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
    FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
    FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
    FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
    FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
    FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
    // 使能DM9000A的FSMC访问
    FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
}

开发者ID:Mars-Wu，项目名称:djyos，代码行数:34，代码来源:SRAM.c

示例9: RCC_AHB3PeriphClockCmd

void ILI9341::fsmcSetup()
{
  FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
  FSMC_NORSRAMTimingInitTypeDef FSMC_NORSRAMTimingInitStructureRead;
  FSMC_NORSRAMTimingInitTypeDef FSMC_NORSRAMTimingInitStructureWrite;

  /* Enable FSMC Clock */
  RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE);

  /* Define Read timing parameters */
  FSMC_NORSRAMTimingInitStructureRead.FSMC_AddressSetupTime = 1;
  FSMC_NORSRAMTimingInitStructureRead.FSMC_AddressHoldTime = 0;
  FSMC_NORSRAMTimingInitStructureRead.FSMC_DataSetupTime = 15;
  FSMC_NORSRAMTimingInitStructureRead.FSMC_BusTurnAroundDuration = 0;
  FSMC_NORSRAMTimingInitStructureRead.FSMC_CLKDivision = 1;
  FSMC_NORSRAMTimingInitStructureRead.FSMC_DataLatency = 0;
  FSMC_NORSRAMTimingInitStructureRead.FSMC_AccessMode = FSMC_AccessMode_A;

  /* Define Write Timing parameters */
  FSMC_NORSRAMTimingInitStructureWrite.FSMC_AddressSetupTime = 2; // 2
  FSMC_NORSRAMTimingInitStructureWrite.FSMC_AddressHoldTime = 0; // 0
  FSMC_NORSRAMTimingInitStructureWrite.FSMC_DataSetupTime = 5; // 5
  FSMC_NORSRAMTimingInitStructureWrite.FSMC_BusTurnAroundDuration = 0;
  FSMC_NORSRAMTimingInitStructureWrite.FSMC_CLKDivision = 1;
  FSMC_NORSRAMTimingInitStructureWrite.FSMC_DataLatency = 0;
  FSMC_NORSRAMTimingInitStructureWrite.FSMC_AccessMode = FSMC_AccessMode_A;

  /* Define protocol type */
  FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM1; //Bank1
  FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; //No mux
  FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; //SRAM type
  FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; //16 bits wide
  FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode =
                  FSMC_BurstAccessMode_Disable; //No Burst
  FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait =
                  FSMC_AsynchronousWait_Disable; // No wait
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity =
                  FSMC_WaitSignalPolarity_Low; //Don'tcare
  FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; //No wrap mode
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive =
                  FSMC_WaitSignalActive_BeforeWaitState; //Don't care
  FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; //Don't care
  FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Enable; //Allow distinct Read/Write parameters
  FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; //Don't care

  // Set read timing structure
  FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct =
                  &FSMC_NORSRAMTimingInitStructureRead;

  // Set write timing structure
  FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct =
                  &FSMC_NORSRAMTimingInitStructureWrite;

  // Initialize FSMC for read and write
  FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);

  // Enable FSMC
  FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:bonzehan，项目名称:stm32f4discovery_cpp，代码行数:60，代码来源:ILI9341.cpp

示例10: LCD_init_hardware

void LCD_init_hardware() {
  GPIO_InitTypeDef GPIO_InitStructure;

  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); /* Enable the FSMC Clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC |
                   RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE , ENABLE);

  /* Enable the FSMC pins for LCD control */
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_4 | GPIO_Pin_5 | 
                          GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_14 |
                          GPIO_Pin_15 | GPIO_Pin_7 /*NE1*/ |  GPIO_Pin_11/*RS*/;
  GPIO_Init(GPIOD, &GPIO_InitStructure);
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 |
                          GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 |
                          GPIO_Pin_15;
  GPIO_Init(GPIOE, &GPIO_InitStructure);

  FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
  FSMC_NORSRAMTimingInitTypeDef  p;
  p.FSMC_AddressSetupTime = 0x02;
  p.FSMC_AddressHoldTime = 0x00;
  p.FSMC_DataSetupTime = 0x05;
  p.FSMC_BusTurnAroundDuration = 0x00;
  p.FSMC_CLKDivision = 0x00;
  p.FSMC_DataLatency = 0x00;
  p.FSMC_AccessMode = FSMC_AccessMode_B;
  FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_NOR;

  FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM1;
  FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
  FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
  FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
  FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
  FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
  FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
  FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
  FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
  FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);

  /* Enable FSMC Bank1_SRAM Bank */
  FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);

  // Toggle LCD reset pin
#ifdef LCD_RESET
  jshPinSetState(LCD_RESET, JSHPINSTATE_GPIO_OUT);
  jshPinSetValue(LCD_RESET, 0); //RESET=0
  LCD_DELAY(DELAY_LONG);
  jshPinSetValue(LCD_RESET, 1); //RESET=1
#endif
}

开发者ID:pbitty，项目名称:Espruino，代码行数:56，代码来源:lcd_fsmc.c

示例11: LCD_FSMCConfig

static void LCD_FSMCConfig(void)
{
    FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
    FSMC_NORSRAMTimingInitTypeDef  Timing_read,Timing_write;

    FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &Timing_read;
    FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &Timing_write;

    FSMC_NORSRAMStructInit(&FSMC_NORSRAMInitStructure);

    /*--------------------- read timings configuration ---------------------*/
    Timing_read.FSMC_AddressSetupTime = 3;  /* [3:0] F2/F4 1~15 HCLK */
    Timing_read.FSMC_AddressHoldTime = 0;   /* [7:4] keep 0x00 in SRAM mode */
    Timing_read.FSMC_DataSetupTime = 4;     /* [15:8] F2/F4 0~255 HCLK */
    /* [19:16] Time between NEx high to NEx low (BUSTURN HCLK) */
    Timing_read.FSMC_BusTurnAroundDuration = 1;
    Timing_read.FSMC_CLKDivision = 0; /* [24:20] keep 0x00 in SRAM mode  */
    Timing_read.FSMC_DataLatency = 0; /* [27:25] keep 0x00 in SRAM mode  */
    Timing_read.FSMC_AccessMode = FSMC_AccessMode_A;

    /*--------------------- write timings configuration ---------------------*/
    Timing_write.FSMC_AddressSetupTime = 2;  /* [3:0] F2/F4 1~15 HCLK */
    Timing_write.FSMC_AddressHoldTime = 0;   /* [7:4] keep 0x00 in SRAM mode */
    Timing_write.FSMC_DataSetupTime = 3;     /* [15:8] F2/F4 0~255 HCLK */
    /* [19:16] Time between NEx high to NEx low (BUSTURN HCLK) */
    Timing_write.FSMC_BusTurnAroundDuration = 1;
    Timing_write.FSMC_CLKDivision = 0; /* [24:20] keep 0x00 in SRAM mode  */
    Timing_write.FSMC_DataLatency = 0; /* [27:25] keep 0x00 in SRAM mode  */
    Timing_write.FSMC_AccessMode = FSMC_AccessMode_A;


    /* Color LCD configuration ------------------------------------
       LCD configured as follow:
          - Data/Address MUX = Disable
          - Memory Type = SRAM
          - Data Width = 16bit
          - Write Operation = Enable
          - Extended Mode = Enable
          - Asynchronous Wait = Disable */
    FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4;
    FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
    FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
    FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
    FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
    FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
    FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Enable;
    FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;

    FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
    FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
}

开发者ID:BernardXiong，项目名称:realtouch，代码行数:56，代码来源:ra8875.c

示例12: AD7606_FSMCConfig

/*
*********************************************************************************************************
*	函 数 名: AD7606_FSMCConfig
*	功能说明: 配置FSMC并口访问时序
*	形    参:  无
*	返 回 值: 无
*********************************************************************************************************
*/
static void AD7606_FSMCConfig(void)
{
	FSMC_NORSRAMInitTypeDef  init;
	FSMC_NORSRAMTimingInitTypeDef  timing;

	/*
		AD7606规格书要求(3.3V时)：RD读信号低电平脉冲宽度最短21ns，高电平脉冲最短宽度15ns。

		按照如下配置 读数均正常。为了和同BANK的LCD配置相同，选择3-0-6-1-0-0
		3-0-5-1-0-0  : RD高持续75ns， 低电平持续50ns.  1us以内可读取8路样本数据到内存。
		1-0-1-1-0-0  : RD高75ns，低电平执行12ns左右，下降沿差不多也12ns.  数据读取正确。
	*/
	/* FSMC_Bank1_NORSRAM4 configuration */
	timing.FSMC_AddressSetupTime = 3;
	timing.FSMC_AddressHoldTime = 0;
	timing.FSMC_DataSetupTime = 6;
	timing.FSMC_BusTurnAroundDuration = 1;
	timing.FSMC_CLKDivision = 0;
	timing.FSMC_DataLatency = 0;
	timing.FSMC_AccessMode = FSMC_AccessMode_A;

	/*
	 LCD configured as follow:
	    - Data/Address MUX = Disable
	    - Memory Type = SRAM
	    - Data Width = 16bit
	    - Write Operation = Enable
	    - Extended Mode = Enable
	    - Asynchronous Wait = Disable
	*/
	init.FSMC_Bank = FSMC_Bank1_NORSRAM4;
	init.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
	init.FSMC_MemoryType = FSMC_MemoryType_SRAM;
	init.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
	init.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
	init.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
	init.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
	init.FSMC_WrapMode = FSMC_WrapMode_Disable;
	init.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
	init.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
	init.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
	init.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
	init.FSMC_WriteBurst = FSMC_WriteBurst_Disable;

	init.FSMC_ReadWriteTimingStruct = &timing;
	init.FSMC_WriteTimingStruct = &timing;

	FSMC_NORSRAMInit(&init);

	/* - BANK 1 (of NOR/SRAM Bank 1~4) is enabled */
	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
}

开发者ID:ws06，项目名称:wind，代码行数:60，代码来源:bsp_ad7606.c

示例13: fsmc_for_sram_configration

static void fsmc_for_sram_configration(void)
{
	FSMC_NORSRAMInitTypeDef  	FSMC_NORSRAMInitStructure;
	FSMC_NORSRAMTimingInitTypeDef  	timing;

	FSMC_NORSRAMDeInit(FSMC_Bank1_NORSRAM1);

	/*
	 * ---- 初期调试用参数
	 * p.FSMC_AddressSetupTime = 15;
	 * p.FSMC_AddressHoldTime = 15;
	 * p.FSMC_DataSetupTime = 15;
	 * p.FSMC_BusTurnAroundDuration = 15;
	 * p.FSMC_CLKDivision = 8;
	 * p.FSMC_DataLatency = 15;
	 */
	timing.FSMC_AddressSetupTime 	  = 0x01; /* It is not used with synchronous NOR Flash memories. */
	timing.FSMC_AddressHoldTime 	  = 0x01; /* It is not used with synchronous NOR Flash memories.*/
	timing.FSMC_DataSetupTime 	  = 0x01; /* It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
	timing.FSMC_BusTurnAroundDuration = 0x00; /* It is only used for multiplexed NOR Flash memories. */

	timing.FSMC_CLKDivision		  = 0x00; /* It is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
	timing.FSMC_DataLatency		  = 0x00; /* It must be set to 0 in case of a CRAM */
	timing.FSMC_AccessMode		  = FSMC_AccessMode_B;

	FSMC_NORSRAMInitStructure.FSMC_Bank 		  = FSMC_Bank1_NORSRAM1;
#if RT_EXT_SRAM_MULTIPLEXED
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux 	  = FSMC_DataAddressMux_Enable;
#else
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux 	  = FSMC_DataAddressMux_Disable;
#endif
	FSMC_NORSRAMInitStructure.FSMC_MemoryType 	  = FSMC_MemoryType_PSRAM;
	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth 	  = FSMC_MemoryDataWidth_16b;
	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode 	  = FSMC_BurstAccessMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait   = FSMC_AsynchronousWait_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
	FSMC_NORSRAMInitStructure.FSMC_WrapMode 	  = FSMC_WrapMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive   = FSMC_WaitSignalActive_BeforeWaitState;
	FSMC_NORSRAMInitStructure.FSMC_WriteOperation 	  = FSMC_WriteOperation_Enable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignal 	  = FSMC_WaitSignal_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode 	  = FSMC_ExtendedMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WriteBurst 	  = FSMC_WriteBurst_Disable;

	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct	= &timing;
	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct	= &timing;
	/* FSMC_NORSRAMStructInit(&FSMC_NORSRAMInitStructure); */

	FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);

	/* Enable FSMC Bank1_SRAM Bank */
	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:malooei，项目名称:yeejoin-workspace，代码行数:52，代码来源:board.c

示例14: UiLcdHy28_FSMCConfig

//*----------------------------------------------------------------------------
//* Function Name       : UiLcdHy28_FSMCConfig
//* Object              :
//* Input Parameters    :
//* Output Parameters   :
//* Functions called    :
//*----------------------------------------------------------------------------
void UiLcdHy28_FSMCConfig(void)
{
	FSMC_NORSRAMInitTypeDef  		FSMC_NORSRAMInitStructure;
	FSMC_NORSRAMTimingInitTypeDef  	p;

	// Enable FSMC clock
	RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE);

	//-- FSMC Configuration ------------------------------------------------------
	//----------------------- SRAM Bank 3 ----------------------------------------
	// FSMC_Bank1_NORSRAM4 configuration
	p.FSMC_AddressSetupTime 		= 3;
	p.FSMC_AddressHoldTime 			= 0;
	p.FSMC_DataSetupTime 			= 9;
	p.FSMC_BusTurnAroundDuration 	= 0;
	p.FSMC_CLKDivision 				= 0;
	p.FSMC_DataLatency 				= 0;
	p.FSMC_AccessMode 				= FSMC_AccessMode_A;

	// Color LCD configuration ------------------------------------
	//   LCD configured as follow:
	//     - Data/Address MUX = Disable
	//     - Memory Type = SRAM
	//     - Data Width = 16bit
	//     - Write Operation = Enable
	//     - Extended Mode = Enable
	//     - Asynchronous Wait = Disable

	FSMC_NORSRAMInitStructure.FSMC_Bank 					= FSMC_Bank1_NORSRAM1;
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux 			= FSMC_DataAddressMux_Disable;
	FSMC_NORSRAMInitStructure.FSMC_MemoryType 				= FSMC_MemoryType_SRAM;
	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth 			= FSMC_MemoryDataWidth_16b;
	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode 			= FSMC_BurstAccessMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait 		= FSMC_AsynchronousWait_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity 		= FSMC_WaitSignalPolarity_Low;
	FSMC_NORSRAMInitStructure.FSMC_WrapMode 				= FSMC_WrapMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive 		= FSMC_WaitSignalActive_BeforeWaitState;
	FSMC_NORSRAMInitStructure.FSMC_WriteOperation 			= FSMC_WriteOperation_Enable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignal 				= FSMC_WaitSignal_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode 			= FSMC_ExtendedMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WriteBurst 				= FSMC_WriteBurst_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct 	= &p;
	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct 		= &p;
	FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);

	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:gmtii，项目名称:mcHF-SDR，代码行数:54，代码来源:ui_lcd_hy28.c

示例15: FSMC_Configuration

/**
  * @brief  Configures the Parallel interface (FSMC) for LCD(Parallel mode)
  * @param  None
  * @retval None
  */
static void FSMC_Configuration(void)
{
    FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
    FSMC_NORSRAMTimingInitTypeDef  p;

    /* Enable FSMC clock */
    RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE);

    /* FSMC_Bank1_NORSRAM1 configuration */
    p.FSMC_AddressSetupTime = 3;
    p.FSMC_AddressHoldTime = 0;
    p.FSMC_DataSetupTime = 4;
    p.FSMC_BusTurnAroundDuration = 0;
    p.FSMC_CLKDivision = 0;
    p.FSMC_DataLatency = 0;
    p.FSMC_AccessMode = FSMC_AccessMode_B;
    /* Color LCD configuration ------------------------------------
       LCD configured as follow:
          - Data/Address MUX = Disable
          - Memory Type = SRAM
          - Data Width = 16bit
          - Write Operation = Enable
          - Extended Mode = Enable
          - Asynchronous Wait = Disable */

    FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM1;
    FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
    FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
    FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
    FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
    FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
    FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
    FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;

    FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);

    /* Enable FSMC NOR/SRAM Bank1 */
    FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM1, ENABLE);
}

开发者ID:nongxiaoming，项目名称:STM32F4_Tx，代码行数:51，代码来源:drv_lcd.c

示例16: LCD_FSMCConfig

/*******************************************************************************
* Function Name  : LCD_FSMCConfig
* Description    : Configures the Parallel interface (FSMC) for LCD(Parallel mode)
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_FSMCConfig(void)
{
#ifndef NO_LCD  
  FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure; 
  FSMC_NORSRAMTimingInitTypeDef  p;

/*-- FSMC Configuration ------------------------------------------------------*/
/*----------------------- SRAM Bank 4 ----------------------------------------*/
  /* FSMC_Bank1_NORSRAM4 configuration */
  p.FSMC_AddressSetupTime = 1;
  p.FSMC_AddressHoldTime = 1;
  p.FSMC_DataSetupTime = 20;
  p.FSMC_BusTurnAroundDuration = 0;
  p.FSMC_CLKDivision = 0;
  p.FSMC_DataLatency = 1;
  p.FSMC_AccessMode = FSMC_AccessMode_A;

  /* LCD configuration ------------------------------------
     LCD configured as follow:
        - Data/Address MUX = Disable
        - Memory Type = SRAM
        - Data Width = 8bit
        - Write Operation = Enable
        - Extended Mode = Disable
        - Asynchronous Wait = Disable */
  FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4;
  FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
  FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
  FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
  FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
  FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
  FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
  FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
  FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
  FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
  FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
  FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;

  FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);  

  /* BANK 4 (of NOR/SRAM Bank 1~4) is enabled */
  FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
#endif
}

开发者ID:gary9555，项目名称:ELEC3300-Mainboard-System，代码行数:53，代码来源:lcd.c

示例17: ch374_CfgFSMC

/*
*********************************************************************************************************
*	函 数 名: ch374_CfgFSMC
*	功能说明: 初始化CPU的FSMC。
*	形    参：无
*	返 回 值: 无
*********************************************************************************************************
*/
static void ch374_CfgFSMC(void)
{
	FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure;
	FSMC_NORSRAMTimingInitTypeDef  FSMC_NORSRAMTimingInitStructure;
	
	/*----------------------- SRAM Bank 4 ----------------------------------------*/
	/* 配置FSMC_Bank1_NORSRAM4时序延迟 */
	FSMC_NORSRAMTimingInitStructure.FSMC_AddressSetupTime = 1;
	FSMC_NORSRAMTimingInitStructure.FSMC_AddressHoldTime = 0;
	FSMC_NORSRAMTimingInitStructure.FSMC_DataSetupTime = 2;
	FSMC_NORSRAMTimingInitStructure.FSMC_BusTurnAroundDuration = 0;
	FSMC_NORSRAMTimingInitStructure.FSMC_CLKDivision = 0;
	FSMC_NORSRAMTimingInitStructure.FSMC_DataLatency = 0;
	FSMC_NORSRAMTimingInitStructure.FSMC_AccessMode = FSMC_AccessMode_B;
	
	/* 
		CH374总线配置如下:
	    - Data/Address MUX = Disable
	    - Memory Type = SRAM
	    - Data Width = 16bit
	    - Write Operation = Enable
	    - Extended Mode = Enable
	    - Asynchronous Wait = Disable 
	*/
	FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4;
	FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
	FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
	FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
	FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; 	
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
	FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
	FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
	FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
	FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
	FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &FSMC_NORSRAMTimingInitStructure;
	FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &FSMC_NORSRAMTimingInitStructure;
	
	FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
	
	/* - BANK 4 (of NOR/SRAM Bank 0~3) is enabled */
	FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
}

开发者ID:Nikola-JK，项目名称:test_project，代码行数:53，代码来源:bsp_CH374.C

示例18: Lcd_FMSC_Config

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FSMDEBUG函数代码示例发布时间：2022-05-30

C++ FSGetCatalogInfo函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服

地址：深圳市南山区西丽大学城创智工业园

电邮：jeky_zhao#qq.com

移动电话：139-2527-9053

客服电话

电子邮件

C++ FSMC_NORSRAMInit函数代码示例

示例1: lcd_fsmc_nor_mux_config

示例2: LCD_FSMCConf

示例3: LCD_FSMC_Config

示例4: FSMC_LCD_Init

示例5: lcd_fsmc_initialize

示例6: SRAM_FSMC_Config

示例7: FSMC_Configuration

示例8: Dm9000a_FSMCConfig

示例9: RCC_AHB3PeriphClockCmd

示例10: LCD_init_hardware

示例11: LCD_FSMCConfig

示例12: AD7606_FSMCConfig

示例13: fsmc_for_sram_configration

示例14: UiLcdHy28_FSMCConfig

示例15: FSMC_Configuration

示例16: LCD_FSMCConfig

示例17: ch374_CfgFSMC

示例18: Lcd_FMSC_Config

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053