C++ FLOAT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FLOAT函数的典型用法代码示例。如果您正苦于以下问题：C++ FLOAT函数的具体用法？C++ FLOAT怎么用？C++ FLOAT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FLOAT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: SetKeyboardState

void CLcInputA::OnReset()
{
	// 키보드는 전부 0
	SetKeyboardState(m_KeyCur);
	
	memset(m_KeyCur, 0, sizeof m_KeyCur);
	memset(m_KeyOld, 0, sizeof m_KeyOld);
	memset(m_KeyMap, 0, sizeof m_KeyMap);
	
	memset(m_BtnCur, 0, sizeof m_BtnCur);
	memset(m_BtnOld, 0, sizeof m_BtnOld);
	memset(m_BtnMap, 0, sizeof m_BtnMap);

	// 마우스는 현재 위치 유지
	m_fWheel = 0;

	POINT	pt;

	::GetCursorPos(&pt);
	::ScreenToClient( m_hWnd, &pt);

	m_vMsCur[0] = FLOAT(pt.x);
	m_vMsCur[1] = FLOAT(pt.y);
	m_vMsCur[2] = 0.f;

	memcpy(m_vMsOld, m_vMsCur, sizeof m_vMsCur);
	memset(m_vDelta,        0, sizeof m_vDelta);
}

开发者ID:GALICSOFT，项目名称:glc220_src，代码行数:28，代码来源:LnInputA.cpp

示例2: InitSHTables

/** Initializes the tables used to calculate SH values. */
static INT InitSHTables()
{
	INT	L = 0,
		M = 0;

	for(INT BasisIndex = 0;BasisIndex < MAX_SH_BASIS;BasisIndex++)
	{
		BasisL[BasisIndex] = L;
		BasisM[BasisIndex] = M;

		NormalizationConstants[BasisIndex] = appSqrt(
			(FLOAT(2 * L + 1) / FLOAT(4 * PI)) *
			(FLOAT(Factorial(L - Abs(M))) / FLOAT(Factorial(L + Abs(M))))
			);

		if(M != 0)
			NormalizationConstants[BasisIndex] *= appSqrt(2.f);

		M++;
		if(M > L)
		{
			L++;
			M = -L;
		}
	}

	return 0;
}

开发者ID:LiuKeHua，项目名称:colorful-engine，代码行数:29，代码来源:SHMath.cpp

示例3: vcEye

INT	CMain::Init()
{
	// Input »ý¼º
	if(LC_FAILED(LcxEnt_CreateInput(NULL, &m_pInput, m_hWnd)))
		return LC_EFAIL;


	// Camera »ý¼º
	if(LC_FAILED(LcxEnt_CreateCamera(LCXCMD_CAMERA_3D, &m_pCam)))
		return LC_EFAIL;



	LCXVECTOR3	vcEye (30, -100, 30);
	LCXVECTOR3	vcLook(30,   0,  0);
	LCXVECTOR3	vcUp  ( 0,   0,  1);
	m_pCam->SetupParamView( &vcEye, &vcLook, &vcUp);

	FLOAT	fFov = LCXToRadian(45.0F);
	FLOAT	fScnW= FLOAT(m_nScnW);
	FLOAT	fScnH= FLOAT(m_nScnH);
	FLOAT	fNear= 1.0F;
	FLOAT	fFar = 5000.0F;
	m_pCam->SetupParamProj(fFov, fScnW, fScnH, fNear, fFar);


	if(LC_FAILED(LcxEnt_CreateEntity(LCXCMD_ENTITY_AXIS, &m_pXYZ)))
		return LC_EFAIL;


	if(LC_FAILED(LcxEnt_CreateEntity(LCXCMD_ENTITY_GRID, &m_pGrid)))
		return LC_EFAIL;

	return LC_OK;
}

开发者ID:GALICSOFT，项目名称:glc220，代码行数:35，代码来源:Main.cpp

示例4:

int D3DVertexBufferCache::FindBestEntry(int size)
{
   // Search for buffer that fits in borders
   for (int i = 0; i < _cache.Length(); i++)
   {
      const int vs = _cache[i].size;
      if (size >= (vs - FLOAT(vs) * size_border_low) && size <= vs)
         return i;
   }
   bool less_than_all = true;
   for (int i = 0; i < _cache.Length(); i++)
   {
      const int vs = _cache[i].size;
      if (size >= (vs - FLOAT(vs) * size_border_low))
         less_than_all = false;
   }
   // Requested size is too small to reuse in any buffer
   if (less_than_all)
      return -1;
   // Search for buffer that can be reallocated
   for (int i = 0; i < _cache.Length(); i++)
   {
      const int vs = _cache[i].size;
      if (size <= (vs + FLOAT(vs) * size_border_high))
         return i;
   }
   // No buffer can be reused or reallocated, create a new one
   return -1;
}

开发者ID:Limsik，项目名称:e17，代码行数:29，代码来源:evas_direct3d_vertex_buffer_cache.cpp

示例5: FLOAT

void CGpApp::ShieldPulse()
{
	m_ShieldTransparency = FLOAT(m_ShieldEnergy) / FLOAT(SHIELDENERGYmax);



	DOUBLE TimeCur = LcSys_GetTickCount();

	if(TimeCur < (m_ShieldTimeDelta+ m_ShieldTimeBgn))
		return;


	m_ShieldTimeBgn = TimeCur;


	m_ShieldRatio += m_ShieldExtend * 0.02F;

	if(m_ShieldRatio >= SHIELDRATIOmax)
	{
		m_ShieldExtend = SHIELDRATIOmax;
		m_ShieldExtend = -1.F;
	}

	if(m_ShieldRatio < SHIELDRATIOmin)
	{
		m_ShieldExtend = SHIELDRATIOmin;
		m_ShieldExtend = +1.F;
	}
}

开发者ID:GALICSOFT，项目名称:glc220_src，代码行数:29，代码来源:GpApp3.cpp

示例6: FLOAT

void HWCDisplayExternal::ApplyScanAdjustment(hwc_rect_t *display_frame) {
  if (display_intf_->IsUnderscanSupported()) {
    return;
  }

  // Read user defined width and height ratio
  int width = 0, height = 0;
  HWCDebugHandler::Get()->GetProperty("sdm.external_action_safe_width", &width);
  float width_ratio = FLOAT(width) / 100.0f;
  HWCDebugHandler::Get()->GetProperty("sdm.external_action_safe_height", &height);
  float height_ratio = FLOAT(height) / 100.0f;

  if (width_ratio == 0.0f ||  height_ratio == 0.0f) {
    return;
  }

  uint32_t panel_width = 0;
  uint32_t panel_height = 0;
  GetPanelResolution(&panel_width, &panel_height);

  if (panel_width == 0 || panel_height == 0) {
    DLOGV("Invalid panel dimensions (%d, %d)", panel_width, panel_height);
    return;
  }

  int x_offset = INT((FLOAT(panel_width) * width_ratio) / 2.0f);
  int y_offset = INT((FLOAT(panel_height) * height_ratio) / 2.0f);

  display_frame->left = display_frame->left + x_offset;
  display_frame->top = display_frame->top + y_offset;
  display_frame->right = display_frame->right - x_offset;
  display_frame->bottom = display_frame->bottom - y_offset;
}

开发者ID:myfluxi，项目名称:android_hardware_qcom_display，代码行数:33，代码来源:hwc_display_external.cpp

示例7: InitTris

static void InitTris(void)
{
  INDEX iR, iC;
  INDEX ctVx = _ctR*_ctC;
  _avtx.Push(ctVx);
  _atex.Push(ctVx);
  _acol.Push(ctVx);
  for( iR=0; iR<_ctR; iR++) {
    for( iC=0; iC<_ctC; iC++) {
      INDEX ivx = iR*_ctC+iC;
      _avtx[ivx].x =  FLOAT(iC) / _ctC*4 -2.0f;
      _avtx[ivx].y = -FLOAT(iR) / _ctR*4 +2.0f;
      _avtx[ivx].z = -1.0f;
      _atex[ivx].st.s = (iC+iR) % 2;
      _atex[ivx].st.t = (iR)    % 2;
      _acol[ivx].ul.abgr = 0xFFFFFFFF;
    }
  }

  INDEX ctTri = (_ctR-1)*(_ctC-1)*2;
  _aiElements.Push(ctTri*3);
  for( iR=0; iR<_ctR-1; iR++) {
    for( iC=0; iC<_ctC-1; iC++) {
      INDEX iq = iR*(_ctC-1)+iC;
      _aiElements[iq*6+0] = (iR+1) * _ctC + (iC+0);
      _aiElements[iq*6+1] = (iR+1) * _ctC + (iC+1);
      _aiElements[iq*6+2] = (iR+0) * _ctC + (iC+0);
      _aiElements[iq*6+3] = (iR+0) * _ctC + (iC+0);
      _aiElements[iq*6+4] = (iR+1) * _ctC + (iC+1);
      _aiElements[iq*6+5] = (iR+0) * _ctC + (iC+1);
    }
  }
}

开发者ID:ptitSeb，项目名称:Serious-Engine，代码行数:33，代码来源:Benchmark.cpp

示例8: cm_float_atan2

void
cm_float_atan2(unsigned argc, obj_t args)
{
  obj_t recvr = CAR(args);
  
  m_float_new(consts.cl._float, atan2l(FLOAT(recvr)->val, FLOAT(CAR(CDR(args)))->val));
}

开发者ID:hpersh，项目名称:ool2，代码行数:7，代码来源:math.c

示例9: FLOAT

// convert to human-friendly format
void CMappingDefinition::ToUI(CMappingDefinitionUI &mdui) const
{
  // make a copy of parameters
  FLOAT fUoS = md_fUoS;
  FLOAT fUoT = md_fUoT;
  FLOAT fVoS = md_fVoS;
  FLOAT fVoT = md_fVoT;

  // find size of mapping vectors
  FLOAT fUSize = FLOAT(sqrt(fUoS*fUoS+fUoT*fUoT));
  FLOAT fVSize = FLOAT(sqrt(fVoS*fVoS+fVoT*fVoT));

  // find rotation of both vectors
  ANGLE aURot = -(ATan2(fVoT, fVoS)-90.0f);
  ANGLE aVRot = -(ATan2(fUoT, fUoS));

  // use the found values
  Snap(aURot, 0.001f);
  Snap(aVRot, 0.001f);
  mdui.mdui_aURotation= NormalizeAngle(aURot);
  mdui.mdui_aVRotation= NormalizeAngle(aVRot);
  mdui.mdui_fUStretch = 1/fUSize;
  mdui.mdui_fVStretch = 1/fVSize;
  mdui.mdui_fUOffset  = md_fUOffset;
  mdui.mdui_fVOffset  = md_fVOffset;
}

开发者ID:RocketersAlex，项目名称:LCSource，代码行数:27，代码来源:TextureMapping.cpp

示例10: cordic_calc_iq

/*
 * cordic_calc_iq() - calculates the i/q coordinate for given angle
 *
 * theta: angle in degrees for which i/q coordinate is to be calculated
 * coord: function output parameter holding the i/q coordinate
 */
struct cordic_iq cordic_calc_iq(s32 theta)
{
	struct cordic_iq coord;
	s32 angle, valtmp;
	unsigned iter;
	int signx = 1;
	int signtheta;

	coord.i = CORDIC_ANGLE_GEN;
	coord.q = 0;
	angle = 0;

	theta = FIXED(theta);
	signtheta = (theta < 0) ? -1 : 1;
	theta = ((theta + FIXED(180) * signtheta) % FIXED(360)) -
		FIXED(180) * signtheta;

	if (FLOAT(theta) > 90) {
		theta -= FIXED(180);
		signx = -1;
	} else if (FLOAT(theta) < -90) {
		theta += FIXED(180);
		signx = -1;
	}

	for (iter = 0; iter < CORDIC_NUM_ITER; iter++) {
		if (theta > angle) {
			valtmp = coord.i - (coord.q >> iter);
			coord.q += (coord.i >> iter);
			angle += arctan_table[iter];
		} else {

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:37，代码来源:cordic.c

示例11: RenderMessagePicture

void RenderMessagePicture(CDrawPort *pdp)
{
  CCompMessage &cm = _acmMessages[_iActiveMessage];
  // try to
  try {
    // load image
    _toPicture.SetData_t(cm.cm_fnmPicture);
    ((CTextureData*)_toPicture.GetData())->Force(TEX_CONSTANT);
  // if failed
  } catch(char *strError) {
    // report error
    CPrintF("Cannot load '%s':\n%s\n", (CTString&)cm.cm_fnmPicture, strError);
    // do nothing
    return;
  }

  // get image and box sizes
  PIX pixImgSizeI = _toPicture.GetWidth();
  PIX pixImgSizeJ = _toPicture.GetHeight();
  PIXaabbox2D boxPic(PIX2D(_pixMarginI, _pixMarginJ),
      PIX2D(_boxMsgImage.Size()(1)-_pixMarginI, _boxMsgImage.Size()(2)-_pixMarginJ));
  PIX pixBoxSizeI = boxPic.Size()(1);
  PIX pixBoxSizeJ = boxPic.Size()(2);
  PIX pixCenterI = _boxMsgImage.Size()(1)/2;
  PIX pixCenterJ = _boxMsgImage.Size()(2)/2;
  // find image stretch to fit in box
  FLOAT fStretch = Min(FLOAT(pixBoxSizeI)/pixImgSizeI, FLOAT(pixBoxSizeJ)/pixImgSizeJ);
  // draw the image
  pdp->PutTexture(&_toPicture,
    PIXaabbox2D(
      PIX2D(pixCenterI-pixImgSizeI*fStretch/2, pixCenterJ-pixImgSizeJ*fStretch/2),
      PIX2D(pixCenterI+pixImgSizeI*fStretch/2, pixCenterJ+pixImgSizeJ*fStretch/2)));
}

开发者ID:angelog，项目名称:Rockets-Forever，代码行数:33，代码来源:Computer.cpp

示例12: _add

static obj_ptr _add(obj_ptr args, obj_ptr env)
{
    obj_ptr res = MKINT(0);

    for (; CONSP(args); args = CDR(args))
    {
        obj_ptr arg = CAR(args);

        if (INTP(arg))
        {
            if (FLOATP(res))
                FLOAT(res) += (double)INT(arg);
            else
                INT(res) += INT(arg);
        }
        else if (FLOATP(arg))
        {
            if (INTP(res))
            {
                int n = INT(res);
                res->type = TYPE_FLOAT;
                FLOAT(res) = (double)n;

            }
            FLOAT(res) += FLOAT(arg);
        }
        else
        {
            res = MKERROR(MKSTRING("Expected a number in +"), arg);
            break;
        }
    }

    return res;
}

开发者ID:poschengband，项目名称:emrys，代码行数:35，代码来源:c-global-env.c

示例13: memcpy

INT CLcInputA::FrameMove()
{
	INT		i=0;
	POINT	pt;
	SHORT	Val = 0;

	memcpy(m_KeyOld, m_KeyCur, sizeof m_KeyOld);
	memcpy(m_BtnOld, m_BtnCur, sizeof m_BtnOld);
	memcpy(m_vMsOld, m_vMsCur, sizeof m_vMsOld);

	memset(m_KeyCur,		0, sizeof m_KeyCur);
	memset(m_BtnCur,		0, sizeof m_BtnCur);
	memset(m_KeyMap,		0, sizeof m_KeyMap);
	memset(m_BtnMap,		0, sizeof m_BtnMap);


	HWND hWnd = GetActiveWindow();

	if(!m_hWnd || m_hWnd != hWnd)
		return 0;

	for(i=0; i<256; ++i)
	{
		Val = GetAsyncKeyState(i) & 0x8000;
		m_KeyCur[i] = (Val)? 1: 0;
	
		
		INT nOld = m_KeyOld[i];
		INT nCur = m_KeyCur[i];

		if		(0 == nOld && 1 ==nCur)	m_KeyMap[i] = INPUTST_DOWN;		// Down
		else if	(1 == nOld && 0 ==nCur)	m_KeyMap[i] = INPUTST_UP;		// Up
		else if	(1 == nOld && 1 ==nCur)	m_KeyMap[i] = INPUTST_PRESS;	// Press
	}

	m_BtnMap[0] = m_KeyMap[VK_LBUTTON];
	m_BtnMap[1] = m_KeyMap[VK_RBUTTON];
	m_BtnMap[2] = m_KeyMap[VK_MBUTTON];


	::GetCursorPos(&pt);
	::ScreenToClient( m_hWnd, &pt);
	
	m_vMsCur[0] = FLOAT(pt.x);
	m_vMsCur[1] = FLOAT(pt.y);

	if(-786420000.f<m_vMsCur[2] && m_vMsCur[2] <786420000.f)
		m_vMsCur[2] += m_fWheel;
	

	m_vDelta[0] = m_vMsCur[0] - m_vMsOld[0];
	m_vDelta[1] = m_vMsCur[1] - m_vMsOld[1];
	m_vDelta[2] = m_vMsCur[2] - m_vMsOld[2];

	m_fWheel	= 0.f;

	return 0;
}

开发者ID:GALICSOFT，项目名称:glc220_src，代码行数:58，代码来源:LnInputA.cpp

示例14: main

int main()
{
	Init();
	
	
	CustomKernel mandelbrot;
	MODULE_INT_START(mandelbrot)
	MOUDLE_INPUT_FLOAT(x)
	MOUDLE_INPUT_FLOAT(y)
	MODULE_INPUT_INT(maxItt)
	MODULE_MAIN
	FLOAT(a = 0.0f)
	FLOAT(b = 0.0f)
	INT(i = 0)
	INT(j = 0)
	WHILE(i < maxItt)
	BEGIN
		IF( a * a + b * b > 4)
		BEGIN
			STATEMENT(j = 1)
			BREAK
		END
		FLOAT(aTemp = a)
		STATEMENT(a = a * a - b * b + x)
		STATEMENT(b = 2 * aTemp * b + y)
		STATEMENT(i++)
	END
	MODULE_RETURN(i)
	MODULE_END
	
	
	CustomKernel mandelbrotRun;
	KERNEL_START(mandelbrotRun)
	KERNEL_INPUT_INT(itt)
	INCLUDE(mandelbrot)
	KERNEL_MAIN
	INT(val)
	FLOAT(x = (MYCOORD.x - 0.5) * 4)
	FLOAT(y = (MYCOORD.y - 0.5) * 4)
	CALL(val, mandelbrot, x, y, itt)
	KERNEL_OUTPUT(1.5 / float(val))
	KERNEL_END
	

	DeviceVector dVOut(1024, 1024);
	HostVector hVOut;
	
	mandelbrotRun.Input(500);
	mandelbrotRun.Output(dVOut);
	mandelbrotRun.Execute();
	
	hVOut = dVOut;
	ImageProcessing::SaveImageFile("mandelbrot.bmp", hVOut);
	
	getchar();
	return 0;
}

开发者ID:roliver，项目名称:glVectorCompute，代码行数:57，代码来源:mandelbrotTest.cpp

示例15: GetSliderBox

static PIXaabbox2D GetSliderBox(INDEX iFirst, INDEX iVisible, INDEX iTotal,
  PIXaabbox2D boxFull)
{
  FLOAT fSize = ClampUp(FLOAT(iVisible)/iTotal, 1.0f);
  PIX pixFull = boxFull.Size()(2);
  PIX pixSize = PIX(pixFull*fSize);
  pixSize = ClampDn(pixSize, boxFull.Size()(1));
  PIX pixTop = pixFull*(FLOAT(iFirst)/iTotal)+boxFull.Min()(2);
  PIX pixI0 = boxFull.Min()(1);
  PIX pixI1 = boxFull.Max()(1);
  return PIXaabbox2D(PIX2D(pixI0, pixTop), PIX2D(pixI1, pixTop+pixSize));
}

开发者ID:angelog，项目名称:Rockets-Forever，代码行数:12，代码来源:Computer.cpp

示例16: setupViewAndProjMat

//==================================
//  函数:setupViewAndProjMat()
//  目的:初始化View和ProjMat矩阵
//
void setupViewAndProjMat()
{
	// 设置观察矩阵
	D3DXMATRIXA16 matView;
	D3DXMatrixIdentity( &matView );
	g_pd3dD->SetTransform( D3DTS_VIEW, &matView );

	//设置投影矩阵
	D3DXMATRIXA16 matProj;
	D3DXMatrixOrthoOffCenterLH( &matProj, 0.0f, FLOAT(drect.right-drect.left), FLOAT(drect.bottom-drect.top), 0.0f, 0.0f, 1.0f );
	g_pd3dD->SetTransform( D3DTS_PROJECTION, &matProj );
}

开发者ID:nekocode，项目名称:FScript0.2，代码行数:16，代码来源:DX9Draw.cpp

示例17: float_to_s

VALUE
float_to_s(VALUE recv)
{
	char cstr[256] = { '\0' };

#ifdef __cplusplus
	sprintf(cstr, "%#f", FLOAT(recv)->num);
#else
	snprintf(cstr, sizeof(char)*sizeof(cstr),
	         "%#f", FLOAT(recv)->num);
#endif
	return (VALUE)string_new(cstr);
}

开发者ID:mtmiron，项目名称:toi，代码行数:13，代码来源:float.c

示例18: FrmMatrixPerspectiveFovRH

//--------------------------------------------------------------------------------------
// Name: InitProjectionMatrix()
// Desc: Initialize the projection matrix.
//--------------------------------------------------------------------------------------
void CSample::InitProjectionMatrix()
{
    //set Matrix Perspective
    const FLOAT32 field_of_view     = 45.0f;
    const FLOAT32 z_near            = 0.001f;
    const FLOAT32 z_far             = 10.0f;

    m_matProj = FrmMatrixPerspectiveFovRH( field_of_view /* Field of View */,
                                           FLOAT(m_nWidth) / FLOAT(m_nHeight) /*ratio*/,
                                           z_near,
                                           z_far);

}

开发者ID:sunzhiyuan，项目名称:opencl，代码行数:17，代码来源:Scene.cpp

示例19: FLOAT

D3DObjectImage::Vertex *D3DObjectImage::MakeDataBorder()
{
   //FLOAT z = (FLOAT(_cache_i) + 0.5f) / _cache.Length();
   if (_border.x + _border.z > _w)
      _border.x = _border.z = _w / 2;
   if (_border.y + _border.w < _h)
      _border.y = _border.w = _h / 2;

   FLOAT ul, ut, ur, ub;
   ul = _uvborder.x * _du;
   ut = _uvborder.y * _dv;
   ur = _uvborder.z * _du;
   ub = _uvborder.w * _dv;
   FLOAT bl, bt, br, bb;
   bl = _border.x;
   bt = _border.y;
   br = _border.z;
   bb = _border.w;

   const FLOAT half_x = 0.5f * _du / FLOAT(_width);
   const FLOAT half_y = 0.5f * _dv / FLOAT(_height);

   // Diagonal knots
   Vertex data[4] = {
      {_x, _y,                         _u + _sx * _du + half_x,     _v + _sy * _dv + half_y,         _color},
      {_x + bl, _y + bt,               _u + ul + _sx * _du,         _v + ut + _sy * _dv,             _color},
      {_x + _w - br, _y + _h - bb,     _u - ur + (_sx + _sw) * _du, _v - ub + (_sy + _sh) * _dv,     _color},
      {_x + _w, _y + _h,               _u + (_sx + _sw) * _du - half_x, _v + (_sy + _sh) * _dv - half_y, _color}};

   static const int yshift[6] = {0, 0, 1, 1, 0, 1};
   static const int xshift[6] = {0, 1, 0, 0, 1, 1};

   int vi = 0;
   for (int i = 0; i < 3; i++)
   {
      for (int j = 0; j < 3; j++)
      {
         for (int v = 0; v < 6; v++)
         {
            _data[vi].x = data[xshift[v] + j].x;
            _data[vi].y = data[yshift[v] + i].y;
            _data[vi].u = data[xshift[v] + j].u;
            _data[vi].v = data[yshift[v] + i].v;
            _data[vi].col = data[0].col;
            vi++;
         }
      }
   }

   return _data;
}

开发者ID:Limsik，项目名称:e17，代码行数:51，代码来源:evas_direct3d_object_image.cpp

示例20: memcpy

INT CGameInput::FrameMove()
{
	memcpy(m_KeyOld, m_KeyCur, 256); memset(m_KeyCur,0,256);
	memcpy(m_MouseOld, m_MouseCur, 16); memset(m_MouseCur,0,16);


	////////////////////////////////////////////////////////////////////////////////
	//키 입력
	//if(short Key =GetAsyncKeyState(VK_RETURN)&0x8000)
	//{
	//	SetWindowText(m_hWnd,"엔터키 입력됨");
	//}
	//else
	//{
	//	SetWindowText(m_hWnd,"엔터키 입력안됨");
	//}
	////////////////////////////////////////////////////////////////////////////////

	BYTE key[256];
	GetKeyboardState(key);
	for(int i=0; i<256; ++i)
	{
		m_KeyCur[i] = key[i] &0x80;
	}

	POINT	MousePos={0};
	m_MouseCur[0] = m_KeyCur[VK_LBUTTON];
	m_MouseCur[1] = m_KeyCur[VK_RBUTTON];
	m_MouseCur[2] = m_KeyCur[VK_MBUTTON];

	memcpy(&m_MousePos,&MousePos,sizeof(POINT));


	//마우스 위치
	GetCursorPos(&MousePos);
	ScreenToClient(m_hWnd, &MousePos);

	m_MousePos.x=FLOAT(MousePos.x);
	m_MousePos.y=FLOAT(MousePos.y);
	m_MousePos.z +=m_fWheel;

	m_fWheel=0;

	//char sMsg[128]={0};
	//sprintf(sMsg, "%.f %.f %.f", m_MousePos.x, m_MousePos.y, m_MousePos.z);

	//SetWindowText(m_hWnd,sMsg);

	//////////////////////////////////////////////////////////////////////////////
	return 0;
}

开发者ID:serialkk，项目名称:rebelfighter2，代码行数:51，代码来源:GameInput.cpp

注：本文中的FLOAT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FLOM_TRACE函数代码示例发布时间：2022-05-30

C++ FLIPENDIAN函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ FLOAT函数代码示例

示例1: SetKeyboardState

示例2: InitSHTables

示例3: vcEye

示例4:

示例5: FLOAT

示例6: FLOAT

示例7: InitTris

示例8: cm_float_atan2

示例9: FLOAT

示例10: cordic_calc_iq

示例11: RenderMessagePicture

示例12: _add

示例13: memcpy

示例14: main

示例15: GetSliderBox

示例16: setupViewAndProjMat

示例17: float_to_s

示例18: FrmMatrixPerspectiveFovRH

示例19: FLOAT

示例20: memcpy

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053