C++ FLDATA函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FLDATA函数的典型用法代码示例。如果您正苦于以下问题：C++ FLDATA函数的具体用法？C++ FLDATA怎么用？C++ FLDATA使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FLDATA函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: UDATA

DIB dq_dib[] = {
    { &dqdio, DQD },
    { &dqcio, DQC }
    };

#define dqd_dib dq_dib[0]
#define dqc_dib dq_dib[1]

UNIT dqd_unit = { UDATA (&dqd_svc, 0, 0) };

REG dqd_reg[] = {
    { ORDATA (IBUF, dqd_ibuf, 16) },
    { ORDATA (OBUF, dqd_obuf, 16) },
    { BRDATA (DBUF, dqxb, 8, 16, DQ_NUMWD) },
    { DRDATA (BPTR, dq_ptr, DQ_N_NUMWD) },
    { FLDATA (CMD, dqd.command, 0) },
    { FLDATA (CTL, dqd.control, 0) },
    { FLDATA (FLG, dqd.flag,    0) },
    { FLDATA (FBF, dqd.flagbuf, 0) },
    { FLDATA (XFER, dqd_xfer, 0) },
    { FLDATA (WVAL, dqd_wval, 0) },
    { ORDATA (SC, dqd_dib.select_code, 6), REG_HRO },
    { ORDATA (DEVNO, dqd_dib.select_code, 6), REG_HRO },
    { NULL }
    };

MTAB dqd_mod[] = {
    { MTAB_XTD | MTAB_VDV,            1, "SC",    "SC",    &hp_setsc,  &hp_showsc,  &dqd_dev },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "DEVNO", "DEVNO", &hp_setdev, &hp_showdev, &dqd_dev },
    { 0 }
    };

开发者ID:andreax79，项目名称:simh，代码行数:31，代码来源:hp2100_dq.c

示例2: UDATA

   ptr_dev      PTR device descriptor
   ptr_unit     PTR unit descriptor
   ptr_mod      PTR modifiers
   ptr_reg      PTR register list
*/

DIB ptr_dib = { &ptrio, PTR };

UNIT ptr_unit = {
    UDATA (&ptr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0),
           SERIAL_IN_WAIT
    };

REG ptr_reg[] = {
    { ORDATA (BUF, ptr_unit.buf, 8) },
    { FLDATA (CTL, ptr.control, 0) },
    { FLDATA (FLG, ptr.flag, 0) },
    { FLDATA (FBF, ptr.flagbuf, 0) },
    { DRDATA (TRLCTR, ptr_trlcnt, 8), REG_HRO },
    { DRDATA (TRLLIM, ptr_trllim, 8), PV_LEFT },
    { DRDATA (POS, ptr_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, ptr_unit.wait, 24), PV_LEFT },
    { FLDATA (STOP_IOE, ptr_stopioe, 0) },
    { ORDATA (SC, ptr_dib.select_code, 6), REG_HRO },
    { ORDATA (DEVNO, ptr_dib.select_code, 6), REG_HRO },
    { NULL }
    };

MTAB ptr_mod[] = {
    { UNIT_DIAG, UNIT_DIAG, "diagnostic mode", "DIAG", NULL },
    { UNIT_DIAG, 0, "reader mode", "READER", NULL },

开发者ID:ProtoSD，项目名称:simh，代码行数:31，代码来源:hp2100_stddev.c

示例3: dcs_scan_next

void dcs_scan_next (t_bool unlk);

/* DCS data structures

   dcs_dev      DCS device descriptor
   dcs_unit     DCS unit descriptor
   dcs_reg      DCS register list
   dcs_mod      DCS modifiers list
*/

UNIT dcs_unit = { UDATA (&dcsi_svc, UNIT_ATTABLE, 0) };

REG dcs_reg[] = {
    { BRDATA (BUF, dcs_buf, 8, 8, DCS_LINES) },
    { BRDATA (FLAGS, dcs_flg, 8, 1, DCS_LINES) },
    { FLDATA (SCNF, iosta, IOS_V_DCS) },
    { ORDATA (SCAN, dcs_scan, 5) },
    { ORDATA (SEND, dcs_send, 5) },
    { DRDATA (SBSLVL, dcs_sbs, 4), REG_HRO },
    { NULL }
    };

MTAB dcs_mod[] = {
    { MTAB_XTD|MTAB_VDV, 0, "SBSLVL", "SBSLVL",
      &dev_set_sbs, &dev_show_sbs, (void *) &dcs_sbs },
    { MTAB_XTD | MTAB_VDV, 0, "LINES", "LINES",
      &dcs_vlines, &tmxr_show_lines, (void *) &dcs_desc },
    { MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT",
      &tmxr_dscln, NULL, (void *) &dcs_desc },
    { UNIT_ATT, UNIT_ATT, "summary", NULL,
      NULL, &tmxr_show_summ, (void *) &dcs_desc },

开发者ID:B-Rich，项目名称:simh，代码行数:31，代码来源:pdp1_dcs.c

示例4: bcd2asc

int32 bcd2asc (int32 c, UNIT *uptr);
char colbin_to_bcd (uint32 cb);

/* Card reader data structures

   cdr_dev      CDR descriptor
   cdr_unit     CDR unit descriptor
   cdr_reg      CDR register list
*/

UNIT cdr_unit = {
    UDATA (&cdr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE+UNIT_TEXT, 0), 100
    };

REG cdr_reg[] = {
    { FLDATA (LAST, ind[IN_LST], 0) },
    { FLDATA (ERR, ind[IN_READ], 0) },
    { FLDATA (S1, s1sel, 0) },
    { FLDATA (S2, s2sel, 0) },
    { DRDATA (POS, cdr_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, cdr_unit.wait, 24), PV_LEFT },
    { BRDATA (BUF, rbuf, 8, 8, CDR_WIDTH) },
    { NULL }
    };

DEVICE cdr_dev = {
    "CDR", &cdr_unit, cdr_reg, NULL,
    1, 10, 31, 1, 8, 7,
    NULL, NULL, &cd_reset,
    &cdr_boot, &cdr_attach, NULL
    };

开发者ID:jehurodrig，项目名称:simh-pre-git，代码行数:31，代码来源:i1401_cd.c

示例5: UDATA

   ttix_unit    TTIx unit descriptor
   ttix_reg     TTIx register list
   ttix_mod     TTIx modifiers list
*/

DIB ttix_dib = { 
    DEV_TTO1, 8, NULL,
    { &ttox, &ttix, &ttox, &ttix, &ttox, &ttix, &ttox, &ttix }
    };

UNIT ttix_unit = { UDATA (&ttix_svc, UNIT_IDLE|UNIT_ATTABLE, 0), KBD_POLL_WAIT };

REG ttix_reg[] = {
    { BRDATA (BUF, ttix_buf, 8, 8, TTX_MAXL) },
    { ORDATA (DONE, ttix_done, TTX_MAXL) },
    { FLDATA (INT, int_hwre[API_TTI1], INT_V_TTI1) },
    { DRDATA (TIME, ttix_unit.wait, 24), REG_NZ + PV_LEFT },
    { ORDATA (DEVNUM, ttix_dib.dev, 6), REG_HRO },
    { NULL }
    };

MTAB ttix_mod[] = {
    { MTAB_XTD | MTAB_VDV, 0, "LINES", "LINES",
      &ttx_vlines, &tmxr_show_lines, (void *) &ttx_desc },
    { UNIT_ATT, UNIT_ATT, "summary", NULL,
      NULL, &tmxr_show_summ, (void *) &ttx_desc },
    { MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT",
      &tmxr_dscln, NULL, (void *) &ttx_desc },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL,
      NULL, &tmxr_show_cstat, (void *) &ttx_desc },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 0, "STATISTICS", NULL,

开发者ID:alexchenfeng，项目名称:UNIXV6，代码行数:31，代码来源:pdp18b_tt1.c

示例6: UDATA

             UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) },
    { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
             UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) }
    };

REG dp_reg[] = {
    { HRDATA (CMD, dp_cmd, 3) },
    { HRDATA (STA, dp_sta, 8) },
    { HRDATA (BUF, dp_db, 8) },
    { HRDATA (PLAT, dp_plat, 1) },
    { HRDATA (HDSC, dp_hdsc, 6) },
    { HRDATA (CYL, dp_cyl, 9) },
    { HRDATA (SVUN, dp_svun, 8), REG_HIDDEN },
    { BRDATA (DBUF, dpxb, 16, 8, DP_NUMBY) },
    { HRDATA (DBPTR, dp_bptr, 9), REG_RO },
    { FLDATA (FIRST, dp_1st, 0) },
    { GRDATA (IREQ, int_req[l_DPC], 16, DP_NUMDR + 1, i_DPC) },
    { GRDATA (IENB, int_enb[l_DPC], 16, DP_NUMDR + 1, i_DPC) },
    { BRDATA (IARM, dpd_arm, 16, 1, DP_NUMDR) },
    { DRDATA (RTIME, dp_rtime, 0), PV_LEFT | REG_NZ },
    { DRDATA (STIME, dp_stime, 0), PV_LEFT | REG_NZ },
    { DRDATA (WTIME, dp_wtime, 0), PV_LEFT | REG_NZ },
    { URDATA (UCYL, dp_unit[0].CYL, 16, 9, 0,
              DP_NUMDR, REG_RO) },
    { URDATA (UST, dp_unit[0].STD, 16, 8, 0,
              DP_NUMDR, REG_RO) },
    { URDATA (CAPAC, dp_unit[0].capac, 10, T_ADDR_W, 0,
              DP_NUMDR, PV_LEFT | REG_HRO) },
    { HRDATA (DEVNO, dp_dib.dno, 8), REG_HRO },
    { HRDATA (SELCH, dp_dib.sch, 2), REG_HRO },
    { NULL }

开发者ID:B-Rich，项目名称:simh，代码行数:31，代码来源:id_dp.c

示例7: UDATA

/* DR15 data structures

   dr15_dev       DR15 device descriptor
   dr15_unit      DR15 unit descriptor
   dr15_reg       DR15 register list
*/

DIB dr15_dib = { DEV_DR, 2 ,NULL, { &dr60, &dr61 } };

UNIT dr15_unit = {
    UDATA (&dr15_svc, UNIT_FIX+UNIT_BINK+UNIT_ATTABLE, UC15_STATE_SIZE)
    };

REG dr15_reg[] = {
    { ORDATA (TCBP, dr15_tcbp, ADDRSIZE) },
    { FLDATA (TCBACK, dr15_tcb_ack, 0) },
    { FLDATA (IE, dr15_ie, 0) },
    { ORDATA (REQ, dr15_int_req, 4) },
    { FLDATA (API0, int_hwre[API_DR0], INT_V_DR) },
    { FLDATA (API1, int_hwre[API_DR1], INT_V_DR) },
    { FLDATA (API2, int_hwre[API_DR2], INT_V_DR) },
    { FLDATA (API3, int_hwre[API_DR3], INT_V_DR) },
    { ORDATA (APIVEC0, api_vec[API_DR0][INT_V_DR], 7) },
    { ORDATA (APIVEC1, api_vec[API_DR1][INT_V_DR], 7) },
    { ORDATA (APIVEC2, api_vec[API_DR2][INT_V_DR], 7) },
    { ORDATA (APIVEC3, api_vec[API_DR3][INT_V_DR], 7) },
    { DRDATA (POLL, dr15_poll, 10), REG_NZ },
    { ORDATA (DEVNO, dr15_dib.dev, 6), REG_HRO },
    { NULL }
    };

开发者ID:agn453，项目名称:simh，代码行数:30，代码来源:pdp18b_dr15.c

示例8: rtc_reset

t_stat rtc_reset (DEVICE *dhsr);
int32 rtc_tps = 1000;

/* TTI data structures

   tti_dev      TTI device descriptor
   tti_unit     TTI unit descriptor
   tti_reg      TTI register list
   tti_mod      TTI modifiers list
*/

UNIT tti_unit = { UDATA (&tti_svc, TT_MODE_KSR, 0), KBD_POLL_WAIT };

REG tti_reg[] = {
    { ORDATA (BUF, tti_unit.buf, 8) },
    { FLDATA (IRDY, dev_done, INT_V_TTI) },
    { FLDATA (IENB, ISR, INT_V_TTI) },
    { DRDATA (POS, tti_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, tti_unit.wait, 24), REG_NZ + PV_LEFT },
    { NULL }
    };

MTAB tti_mod[] = {
    { TT_MODE, TT_MODE_KSR, "KSR", "KSR", &tty_set_mode },
    { TT_MODE, TT_MODE_7B,  "7b",  "7B",  &tty_set_mode },
    { TT_MODE, TT_MODE_8B,  "8b",  "8B",  &tty_set_mode },
    { TT_MODE, TT_MODE_7P,  "7b",  NULL,  NULL },
    { 0 }
    };

DEVICE tti_dev = {

开发者ID:jehurodrig，项目名称:simh-pre-git，代码行数:31，代码来源:gri_stddev.c

示例9: UDATA

/* LPT data structures

   lpt_dev      LPT device descriptor
   lpt_unit     LPT unit descriptor
   lpt_reg      LPT register list
*/

UNIT lpt_unit = {
    UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_TEXT, 50)
    };

REG lpt_reg[] = {
    { BRDATA (LBUF, lpt_buf, 8, 8, LPT_BSIZE + 1) },
    { DRDATA (BPTR, lpt_bptr, 8) },
    { HRDATA (PCTL, lpt_savctrl, 8) },
    { FLDATA (PRCHK, ind[IN_PRCHK], 0) },
    { FLDATA (PRCH9, ind[IN_PRCH9], 0) },
    { FLDATA (PRCH12, ind[IN_PRCH12], 0) },
    { FLDATA (PRBSY, ind[IN_PRBSY], 0) },
    { DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT },
    { BRDATA (CCT, cct, 8, 32, CCT_LNT) },
    { DRDATA (CCTP, cct_ptr, 8), PV_LEFT },
    { DRDATA (CCTL, cct_lnt, 8), REG_RO + PV_LEFT },
    { NULL }
    };

DEVICE lpt_dev = {
    "LPT", &lpt_unit, lpt_reg, NULL,
    1, 10, 31, 1, 8, 7,
    NULL, NULL, &lpt_reset,
    NULL, &lpt_attach, NULL

开发者ID:ST3ALth，项目名称:simh，代码行数:31，代码来源:i1620_lp.c

示例10: UDATA

    { UDATA (&rp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE, RP_SIZE) },
    { UDATA (&rp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE, RP_SIZE) },
    { UDATA (&rp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE, RP_SIZE) },
    { UDATA (&rp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE, RP_SIZE) },
    { UDATA (&rp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE, RP_SIZE) },
    { UDATA (&rp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE, RP_SIZE) },
    { UDATA (&rp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE, RP_SIZE) }
    };

REG rp_reg[] = {
    { ORDATA (STA, rp_sta, 18) },
    { ORDATA (STB, rp_stb, 18) },
    { ORDATA (DA, rp_da, 18) },
    { ORDATA (MA, rp_ma, 18) },
    { ORDATA (WC, rp_wc, 18) },
    { FLDATA (INT, int_hwre[API_RP], INT_V_RP) },
    { FLDATA (BUSY, rp_busy, 0) },
    { FLDATA (STOP_IOE, rp_stopioe, 0) },
    { DRDATA (STIME, rp_swait, 24), PV_LEFT },
    { DRDATA (RTIME, rp_rwait, 24), PV_LEFT },
    { ORDATA (DEVNO, rp_dib.dev, 6), REG_HRO },
    { NULL }
    };

MTAB rp_mod[] = {
    { UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
    { UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
    { MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO", &set_devno, &show_devno },
    { 0 }
    };

开发者ID:BillHeaton，项目名称:simh，代码行数:30，代码来源:pdp18b_rp.c

示例11: UDATA

    { UDATA (&rk_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
             UNIT_ROABLE, RK_SIZE) },
    { UDATA (&rk_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
             UNIT_ROABLE, RK_SIZE) },
    { UDATA (&rk_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
             UNIT_ROABLE, RK_SIZE) },
    { UDATA (&rk_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
             UNIT_ROABLE, RK_SIZE) }
    };

REG rk_reg[] = {
    { ORDATA (RKSTA, rk_sta, 12) },
    { ORDATA (RKCMD, rk_cmd, 12) },
    { ORDATA (RKDA, rk_da, 12) },
    { ORDATA (RKMA, rk_ma, 12) },
    { FLDATA (BUSY, rk_busy, 0) },
    { FLDATA (INT, int_req, INT_V_RK) },
    { DRDATA (STIME, rk_swait, 24), PV_LEFT },
    { DRDATA (RTIME, rk_rwait, 24), PV_LEFT },
    { FLDATA (STOP_IOE, rk_stopioe, 0) },
    { ORDATA (DEVNUM, rk_dib.dev, 6), REG_HRO },
    { NULL }
    };

MTAB rk_mod[] = {
    { UNIT_HWLK, 0, "write enabled", "WRITEENABLED", NULL },
    { UNIT_HWLK, UNIT_HWLK, "write locked", "LOCKED", NULL },
    { MTAB_XTD|MTAB_VDV, 0, "DEVNO", "DEVNO",
      &set_dev, &show_dev, NULL },
    { 0 }
    };

开发者ID:alexchenfeng，项目名称:UNIXV6，代码行数:31，代码来源:pdp8_rk.c

示例12: UDATA

   mux_unit     MUX unit descriptor
   mux_reg      MUX register list
   mux_mod      MUX modifiers list
*/

DIB mux_dib = { -1, DEV3_GMUX, 0, NULL, &mux };

UNIT mux_unit = { UDATA (&muxi_svc, UNIT_ATTABLE, 0), MUX_INIT_POLL };

REG mux_reg[] = {
    { BRDATA (STA, mux_sta, 8, 6, MUX_LINES) },
    { BRDATA (RBUF, mux_rbuf, 8, 8, MUX_LINES) },
    { BRDATA (XBUF, mux_xbuf, 8, 8, MUX_LINES) },
    { BRDATA (INT, mux_flags, 8, 1, MUX_SCANMAX) },
    { ORDATA (SCAN, mux_scan, 7) },
    { FLDATA (SLCK, mux_slck, 0) },
    { DRDATA (TPS, mux_tps, 8), REG_NZ + PV_LEFT },
    { NULL }
    };

MTAB mux_mod[] = {
    { MTAB_XTD | MTAB_VDV, 0, "LINES", "LINES",
      &mux_vlines, tmxr_show_lines, (void *) &mux_desc },
    { MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT",
      &tmxr_dscln, NULL, &mux_desc },
    { UNIT_ATT, UNIT_ATT, "summary", NULL,
      NULL, &tmxr_show_summ, (void *) &mux_desc },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL,
      NULL, &tmxr_show_cstat, (void *) &mux_desc },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 0, "STATISTICS", NULL,
      NULL, &tmxr_show_cstat, (void *) &mux_desc },

开发者ID:ProtoSD，项目名称:simh，代码行数:31，代码来源:sds_mux.c

示例13: UDATA

    { UDATA (&mtr_svc, UNIT_DIS, 0) }
    };

REG mt_reg[] = {
    { BRDATA (BUF, mt_xb, 16, 8, MT_MAXFR) },
    { DRDATA (BPTR, mt_bptr, 17) },
    { DRDATA (BLNT, mt_blim, 17) },
    { HRDATA (RWINT, mt_rwi, MT_NUMDR) },
    { DRDATA (TIME, mt_time, 24), PV_LEFT+REG_NZ },
    { DRDATA (CTIME, mt_ctime, 24), PV_LEFT+REG_NZ },
    { DRDATA (RWTIME, mt_rwtime, 24), PV_LEFT+REG_NZ },
    { URDATA (UST, mt_unit[0].UST, 16, 8, 0, MT_NUMDR, 0) },
    { URDATA (UCMD, mt_unit[0].UCMD, 16, 8, 0, 2 * MT_NUMDR, 0) },
    { URDATA (POS, mt_unit[0].pos, 10, T_ADDR_W, 0,
              MT_NUMDR, PV_LEFT | REG_RO) },
    { FLDATA (STOP_IOE, mt_stopioe, 0) },
    { HRDATA (DEVNO, mt_dib.dva, 12), REG_HRO },
    { NULL }
    };

MTAB mt_mod[] = {
    { MTUF_WLK, 0, "write enabled", "WRITEENABLED", NULL },
    { MTUF_WLK, MTUF_WLK, "write locked", "LOCKED", NULL }, 
    { MTAB_XTD|MTAB_VUN, 0, "FORMAT", "FORMAT",
      &sim_tape_set_fmt, &sim_tape_show_fmt, NULL },
    { MTAB_XTD|MTAB_VUN, 0, "CAPACITY", "CAPACITY",
      &sim_tape_set_capac, &sim_tape_show_capac, NULL },
    { MTAB_XTD|MTAB_VDV, 0, "CHAN", "CHAN",
      &io_set_dvc, &io_show_dvc, NULL },
    { MTAB_XTD|MTAB_VDV, 0, "DVA", "DVA",
      &io_set_dva, &io_show_dva, NULL },

开发者ID:ProtoSD，项目名称:simh，代码行数:31，代码来源:sigma_mt.c

示例14: IVCL

*/

#define IOLN_PCLK       006

DIB pclk_dib = {
    IOBA_AUTO, IOLN_PCLK, &pclk_rd, &pclk_wr,
    1, IVCL (PCLK), VEC_AUTO, { NULL }
    };

UNIT pclk_unit = { UDATA (&pclk_svc, UNIT_IDLE, 0) };

REG pclk_reg[] = {
    { ORDATA (CSR, pclk_csr, 16) },
    { ORDATA (CSB, pclk_csb, 16) },
    { ORDATA (CNT, pclk_ctr, 16) },
    { FLDATA (INT, IREQ (PCLK), INT_V_PCLK) },
    { FLDATA (OVFL, pclk_csr, CSR_V_ERR) },
    { FLDATA (DONE, pclk_csr, CSR_V_DONE) },
    { FLDATA (IE, pclk_csr, CSR_V_IE) },
    { FLDATA (UPDN, pclk_csr, CSR_V_UPDN) },
    { FLDATA (MODE, pclk_csr, CSR_V_MODE) },
    { FLDATA (RUN, pclk_csr, CSR_V_GO) },
    { BRDATA (TIME, xtim, 10, 32, 4), REG_NZ + PV_LEFT },
    { BRDATA (TPS, rate, 10, 32, 4), REG_NZ + PV_LEFT },
    { ORDATA (DEVADDR, pclk_dib.ba, 32), REG_HRO },
    { ORDATA (DEVVEC, pclk_dib.vec, 16), REG_HRO },
    { NULL }
    };

MTAB pclk_mod[] = {
    { UNIT_LINE50HZ, UNIT_LINE50HZ, "50 Hz Line Frequency", "50HZ", &pclk_set_line },

开发者ID:leomauro，项目名称:simh，代码行数:31，代码来源:pdp11_pclk.c

示例15: IVCL

   tti_dev      TTI device descriptor
   tti_unit     TTI unit descriptor
   tti_reg      TTI register list
*/

DIB tti_dib = {
    IOBA_TTI, IOLN_TTI, &tti_rd, &tti_wr,
    1, IVCL (TTI), VEC_TTI, { NULL }
    };

UNIT tti_unit = { UDATA (&tti_svc, UNIT_IDLE, 0), 0 };

REG tti_reg[] = {
    { ORDATA (BUF, tti_unit.buf, 8) },
    { ORDATA (CSR, tti_csr, 16) },
    { FLDATA (INT, IREQ (TTI), INT_V_TTI) },
    { FLDATA (ERR, tti_csr, CSR_V_ERR) },
    { FLDATA (DONE, tti_csr, CSR_V_DONE) },
    { FLDATA (IE, tti_csr, CSR_V_IE) },
    { DRDATA (POS, tti_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, tti_unit.wait, 24), PV_LEFT },
    { NULL }
    };

MTAB tti_mod[] = {
    { TT_MODE, TT_MODE_UC, "UC", "UC", &tty_set_mode },
    { TT_MODE, TT_MODE_7B, "7b", "7B", &tty_set_mode },
    { TT_MODE, TT_MODE_8B, "8b", "8B", &tty_set_mode },
    { TT_MODE, TT_MODE_7P, "7b", NULL, NULL },
    { MTAB_XTD|MTAB_VDV, 0, "ADDRESS", NULL,
      NULL, &show_addr, NULL },

开发者ID:samrocks69，项目名称:cs450，代码行数:31，代码来源:pdp11_stddev.c

示例16: NVCL

*/

DIB mba0_dib = { TR_MBA0, 0, &mba_rdreg, &mba_wrreg, 0, NVCL (MBA0) };

UNIT mba0_unit = { UDATA (NULL, 0, 0) };

REG mba0_reg[] = {
    { HRDATA (CNFR, mba_cnf[0], 32) },
    { HRDATA (CR, mba_cr[0], 4) },
    { HRDATA (SR, mba_sr[0], 32) },
    { HRDATA (VA, mba_va[0], 17) },
    { HRDATA (BC, mba_bc[0], 16) },
    { HRDATA (DR, mba_dr[0], 32) },
    { HRDATA (SMR, mba_dr[0], 32) },
    { BRDATA (MAP, mba_map[0], 16, 32, MBA_NMAPR) },
    { FLDATA (NEXINT, nexus_req[IPL_MBA0], TR_MBA0) },
    { NULL }
    };

MTAB mba0_mod[] = {
    { MTAB_XTD|MTAB_VDV, TR_MBA0, "NEXUS", NULL,
      NULL, &show_nexus },
    { 0 }
    };

DIB mba1_dib = { TR_MBA1, 0, &mba_rdreg, &mba_wrreg, 0, NVCL (MBA1) };

UNIT mba1_unit = { UDATA (NULL, 0, 0) };

MTAB mba1_mod[] = {
    { MTAB_XTD|MTAB_VDV, TR_MBA1, "NEXUS", NULL,

开发者ID:markpizz，项目名称:markpizz.github.io，代码行数:31，代码来源:vax780_mba.c

示例17: UDATA

    { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
            UNIT_ROABLE, CAP_4651) },
    { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
            UNIT_ROABLE, CAP_4651) },
    { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
            UNIT_ROABLE, CAP_4651) }
    };

REG dp_reg[] = {
    { ORDATA (STA, dp_sta, 16) },
    { ORDATA (BUF, dp_buf, 16) },
    { ORDATA (FNC, dp_fnc, 4) },
    { ORDATA (CW1, dp_cw1, 16) },
    { ORDATA (CW2, dp_cw2, 16) },
    { ORDATA (CSUM, dp_csum, 16) },
    { FLDATA (BUSY, dp_sta, 15) },
    { FLDATA (RDY, dp_sta, 14) },
    { FLDATA (EOR, dp_eor, 0) },
    { FLDATA (DEFINT, dp_defint, 0) },
    { FLDATA (INTREQ, dev_int, INT_V_DP) },
    { FLDATA (ENABLE, dev_enb, INT_V_DP) },
    { BRDATA (TBUF, dpxb, 8, 16, DP_TRKLEN) },
    { ORDATA (RPTR, dp_rptr, 11), REG_RO },
    { ORDATA (WPTR, dp_wptr, 11), REG_RO },
    { ORDATA (BCTR, dp_bctr, 15), REG_RO },
    { ORDATA (GAP, dp_gap, 16), REG_RO },
    { DRDATA (STIME, dp_stime, 24), REG_NZ + PV_LEFT },
    { DRDATA (XTIME, dp_xtime, 24), REG_NZ + PV_LEFT },
    { DRDATA (BTIME, dp_btime, 24), REG_NZ + PV_LEFT },
    { FLDATA (CTYPE, dp_ctype, 0), REG_HRO },
    { URDATA (UCYL, dp_unit[0].CYL, 10, 8, 0,

开发者ID:alexchenfeng，项目名称:UNIXV6，代码行数:31，代码来源:h316_dp.c

示例18: UDATA

/* LPT data structures

   lpt_dev      LPT device descriptor
   lpt_unit     LPT unit descriptor
   lpt_reg      LPT register list
*/

DIB lpt_dib = { DEV_LPT, INT_LPT, PI_LPT, &lpt };

UNIT lpt_unit = {    /* 2007-May-30, bkr */
    UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_TEXT, 0), SERIAL_OUT_WAIT
    };

REG lpt_reg[] = {
    { ORDATA (BUF, lpt_unit.buf, 8) },
    { FLDATA (BUSY, dev_busy, INT_V_LPT) },
    { FLDATA (DONE, dev_done, INT_V_LPT) },
    { FLDATA (DISABLE, dev_disable, INT_V_LPT) },
    { FLDATA (INT, int_req, INT_V_LPT) },
    { DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, lpt_unit.wait, 24), PV_LEFT },
    { FLDATA (STOP_IOE, lpt_stopioe, 0) },
    { NULL }
    };

DEVICE lpt_dev = {
    "LPT", &lpt_unit, lpt_reg, NULL,
    1, 10, 31, 1, 8, 8,
    NULL, NULL, &lpt_reset,
    NULL, NULL, NULL,
    &lpt_dib, DEV_DISABLE

开发者ID:B-Rich，项目名称:simh，代码行数:31，代码来源:nova_lp.c

示例19: UDATA

   ptr_dev      PTR device descriptor
   ptr_unit     PTR unit
   ptr_reg      PTR register list
*/

DIB ptr_dib = { CHAN_W, DEV_PTR, XFR_PTR, std_tplt, &ptr };

UNIT ptr_unit = {
    UDATA (&ptr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE, 0),
           SERIAL_IN_WAIT
    };

REG ptr_reg[] = {
    { ORDATA (BUF, ptr_unit.buf, 7) },
    { FLDATA (XFR, xfr_req, XFR_V_PTR) },
    { FLDATA (SOR, ptr_sor, 0) },
    { DRDATA (POS, ptr_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, ptr_unit.wait, 24), REG_NZ + PV_LEFT },
    { FLDATA (STOP_IOE, ptr_stopioe, 0) },
    { NULL }
    };

MTAB ptr_mod[] = {
    { MTAB_XTD|MTAB_VDV, 0, "CHANNEL", "CHANNEL",
      &set_chan, &show_chan, NULL },
    { 0 }
    };

DEVICE ptr_dev = {
    "PTR", &ptr_unit, ptr_reg, ptr_mod,

开发者ID:dsphinx，项目名称:simh，代码行数:30，代码来源:sds_stddev.c

示例20: UDATA

/* TTI data structures

   tti_dev      TTI device descriptor
   tti_unit     TTI unit descriptor
   tti_reg      TTI register list
   tti_mod      TTI modifiers list
*/

DIB tti_dib = { DEV_TTI, 1, { &tti } };

UNIT tti_unit = { UDATA (&tti_svc, UNIT_IDLE|TT_MODE_KSR, 0), 0 };

REG tti_reg[] = {
    { ORDATA (BUF, tti_unit.buf, 8) },
    { FLDATA (DONE, dev_done, INT_V_TTI) },
    { FLDATA (ENABLE, int_enable, INT_V_TTI) },
    { FLDATA (INT, int_req, INT_V_TTI) },
    { DRDATA (POS, tti_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, tti_unit.wait, 24), PV_LEFT },
    { NULL }
    };

MTAB tti_mod[] = {
    { TT_MODE, TT_MODE_KSR, "KSR", "KSR", &tty_set_mode },
    { TT_MODE, TT_MODE_7B,  "7b",  "7B",  &tty_set_mode },
    { TT_MODE, TT_MODE_8B,  "8b",  "8B",  &tty_set_mode },
    { TT_MODE, TT_MODE_7P,  "7b",  NULL,  NULL },
    { MTAB_XTD|MTAB_VDV, 0, "DEVNO", NULL, NULL, &show_dev, NULL },
    { 0 }
    };

开发者ID:jehurodrig，项目名称:simh-pre-git，代码行数:30，代码来源:pdp8_tt.c

注：本文中的FLDATA函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FLD_ISSET函数代码示例发布时间：2022-05-30

C++ FLA_Scal_external函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19168|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ FLDATA函数代码示例

示例1: UDATA

示例2: UDATA

示例3: dcs_scan_next

示例4: bcd2asc

示例5: UDATA

示例6: UDATA

示例7: UDATA

示例8: rtc_reset

示例9: UDATA

示例10: UDATA

示例11: UDATA

示例12: UDATA

示例13: UDATA

示例14: IVCL

示例15: IVCL

示例16: NVCL

示例17: UDATA

示例18: UDATA

示例19: UDATA

示例20: UDATA

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053