C++ FLA_Obj_free函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FLA_Obj_free函数的典型用法代码示例。如果您正苦于以下问题：C++ FLA_Obj_free函数的具体用法？C++ FLA_Obj_free怎么用？C++ FLA_Obj_free使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FLA_Obj_free函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main


//.........这里部分代码省略.........
    diff = FLA_Max_elemwise_diff( C, Cref );

    printf( "data_unb_var8( %d, 1:3 ) = [ %d %le  %le];\n", i, n,
            gflops / dtime_best, diff );
    fflush( stdout );
#endif

#if TEST_BLK_VAR8==TRUE
    /* Variant 4 blocked */

    for ( irep=0; irep<nrepeats; irep++ ){
      FLA_Copy( Cold, C );
    
      dtime = FLA_Clock();

      Symm_blk_var8( A, B, C, nb_alg );

      dtime = FLA_Clock() - dtime;

      if ( irep == 0 ) 
	dtime_best = dtime;
      else
	dtime_best = ( dtime < dtime_best ? dtime : dtime_best );
    }

    diff = FLA_Max_elemwise_diff( C, Cref );

    printf( "data_blk_var8( %d, 1:3 ) = [ %d %le  %le];\n", i, n,
            gflops / dtime_best, diff );
    fflush( stdout );
#endif


    FLA_Obj_free( &A );
    FLA_Obj_free( &B );
    FLA_Obj_free( &C );
    FLA_Obj_free( &Cref );
    FLA_Obj_free( &Cold );
    printf( "\n" );

    i++;
  }

  /* Print the MATLAB commands to plot the data */

  /* Delete all existing figures */
  printf( "close all\n" );

  /* Plot the performance of FLAME */
  printf( "plot( data_FLAME( :,1 ), data_FLAME( :, 2 ), 'k--' ); \n" );

  /* Indicate that you want to add to the existing plot */
  printf( "hold on\n" );

  /* Plot the performance of the reference implementation */
  //  printf( "plot( data_REF( :,1 ), data_REF( :, 2 ), 'k-' ); \n" );

  /* Plot the performance of your implementations */

#if TEST_UNB_VAR1==TRUE
  printf( "plot( data_unb_var1( :,1 ), data_unb_var1( :, 2 ), 'r-.' ); \n" );
#endif
#if TEST_UNB_VAR2==TRUE
  printf( "plot( data_unb_var2( :,1 ), data_unb_var2( :, 2 ), 'g-.' ); \n" );
#endif
#if TEST_UNB_VAR3==TRUE

开发者ID:ebeweber，项目名称:CS378-Invariant-Project，代码行数:67，代码来源:driver.c

示例2: main


//.........这里部分代码省略.........
      if ( pc_str[param_combo][0] == 'c' ||
           pc_str[param_combo][1] == 'c' )
      {
        if ( precision == FLA_SINGLE_PRECISION )
          datatype = FLA_COMPLEX;
        else
          datatype = FLA_DOUBLE_COMPLEX;
      }
      else
      {
        if ( precision == FLA_SINGLE_PRECISION )
          datatype = FLA_FLOAT;
        else
          datatype = FLA_DOUBLE;
      }

      // If transposing A, switch dimensions.
      if ( pc_str[param_combo][0] == 'n' )
        FLA_Obj_create( datatype, m, k, 0, 0, &A );
      else
        FLA_Obj_create( datatype, k, m, 0, 0, &A );
      
      // If transposing B, switch dimensions.
      if ( pc_str[param_combo][1] == 'n' )
        FLA_Obj_create( datatype, k, n, 0, 0, &B );
      else
        FLA_Obj_create( datatype, n, k, 0, 0, &B );

      FLA_Obj_create( datatype, m, n, 0, 0, &C );
      FLA_Obj_create( datatype, m, n, 0, 0, &C_ref );

      FLA_Random_matrix( A );
      FLA_Random_matrix( B );
      FLA_Random_matrix( C );

      FLA_Copy_external( C, C_ref );

      
      fprintf( stdout, "data_gemm_%s( %d, 1:5 ) = [ %4d %4d %4d  ", pc_str[param_combo], i, m, k, n );
      fflush( stdout );

      time_Gemm( param_combo, FLA_ALG_REFERENCE, n_repeats, m, k, n,
                 A, B, C, C_ref, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );
/*
      time_Gemm( param_combo, FLA_ALG_FRONT, n_repeats, m, k, n,
                 A, B, C, C_ref, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );
*/

      fprintf( stdout, " ]; \n" );
      fflush( stdout );

      FLA_Obj_free( &A );
      FLA_Obj_free( &B );
      FLA_Obj_free( &C );
      FLA_Obj_free( &C_ref );
    }

    fprintf( stdout, "\n" );
  }

/*
  fprintf( stdout, "figure;\n" );

  fprintf( stdout, "hold on;\n" );

  for ( i = 0; i < n_param_combos; i++ ) {
    fprintf( stdout, "plot( data_gemm_%s( :,1 ), data_gemm_%s( :, 2 ), '%c:%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
    fprintf( stdout, "plot( data_gemm_%s( :,1 ), data_gemm_%s( :, 4 ), '%c-.%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
  }

  fprintf( stdout, "legend( ... \n" );

  for ( i = 0; i < n_param_combos; i++ )
    fprintf( stdout, "'ref\\_gemm\\_%s', 'fla\\_gemm\\_%s', ... \n", pc_str[i], pc_str[i] );

  fprintf( stdout, "'Location', 'SouthEast' ); \n" );


  fprintf( stdout, "xlabel( 'problem size p' );\n" );
  fprintf( stdout, "ylabel( 'GFLOPS/sec.' );\n" );
  fprintf( stdout, "axis( [ 0 %d 0 %.2f ] ); \n", p_last, max_gflops );
  fprintf( stdout, "title( 'FLAME gemm front-end performance (%s, %s, %s)' );\n",
           m_dim_desc, k_dim_desc, n_dim_desc );
  fprintf( stdout, "print -depsc gemm_front_%s_%s_%s.eps\n", m_dim_tag, k_dim_tag, n_dim_tag );
  fprintf( stdout, "hold off;\n");
  fflush( stdout );
*/

  FLA_Finalize( );

  return 0;
}

开发者ID:flame，项目名称:libflame，代码行数:101，代码来源:test_Gemm.c

示例3: main


//.........这里部分代码省略.........

  for ( p = p_first, i = 1; p <= p_last; p += p_inc, i += 1 )
  {
    m = m_input;

    if( m < 0 ) m = p / abs(m_input);

    FLA_Obj_create( datatype, m, m, 0, 0, &A );
    FLA_Obj_create( datatype, m, 1, 0, 0, &b );
    FLA_Obj_create( datatype, m, 1, 0, 0, &b_orig );
/*
    FLA_Obj_create( datatype, m, m, m, 1, &A );
    FLA_Obj_create( datatype, m, 1, 1, 1, &b );
    FLA_Obj_create( datatype, m, 1, 1, 1, &b_orig );
*/

    if ( FLA_Obj_is_single_precision( A ) )
      FLA_Obj_create( FLA_FLOAT, 1, 1, 0, 0, &norm );
    else
      FLA_Obj_create( FLA_DOUBLE, 1, 1, 0, 0, &norm );

    FLA_Random_tri_matrix( FLA_UPPER_TRIANGULAR, FLA_UNIT_DIAG, A );
    FLA_Random_matrix( b );
    FLA_Copy_external( b, b_orig );

/*
    time_Trinv_uu( 0, FLA_ALG_REFERENCE, n_repeats, m, nb_alg,
                   A, b, b_orig, norm, &dtime, &diff, &gflops );

    fprintf( stdout, "data_REF( %d, 1:2 ) = [ %d  %6.3lf ]; \n", i, p, gflops );
    fflush( stdout );
*/

    for ( variant = 1; variant <= n_variants; variant++ ){
      
      fprintf( stdout, "data_var%d( %d, 1:7 ) = [ %d  ", variant, i, p );
      fflush( stdout );

      time_Trinv_uu( variant, FLA_ALG_UNBLOCKED, n_repeats, m, nb_alg,
                     A, b, b_orig, norm, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );

      time_Trinv_uu( variant, FLA_ALG_UNB_OPT, n_repeats, m, nb_alg,
                     A, b, b_orig, norm, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );

      time_Trinv_uu( variant, FLA_ALG_BLOCKED, n_repeats, m, nb_alg,
                     A, b, b_orig, norm, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );

      fprintf( stdout, " ]; \n" );
      fflush( stdout );
    }

    FLA_Obj_free( &A );
    FLA_Obj_free( &b );
    FLA_Obj_free( &b_orig );
    FLA_Obj_free( &norm );

    fprintf( stdout, "\n" );
  }

/*
  fprintf( stdout, "figure;\n" );

  fprintf( stdout, "hold on;\n" );

  fprintf( stdout, "plot( data_REF( :,1 ), data_REF( :, 2 ), '-' ); \n" );

  for ( i = 1; i <= n_variants; i++ ){
    fprintf( stdout, "plot( data_var%d( :,1 ), data_var%d( :, 2 ), '%c:%c' ); \n", 
             variant, variant, colors[ i ], ticks[ i ] );
  }

  fprintf( stdout, "legend( ... \n" );
  fprintf( stdout, "'Reference', ... \n" );

  for ( i = 1; i <= n_variants; i++ )
    fprintf( stdout, "'FLAME var%d', ... \n", i );

  fprintf( stdout, "'Location', 'SouthWest' ); \n" );

  fprintf( stdout, "xlabel( 'problem size p' );\n" );
  fprintf( stdout, "ylabel( 'GFLOPS/sec.' );\n" );
  fprintf( stdout, "axis( [ 0 %d 0 %.2f ] ); \n", p_last, max_gflops );
  fprintf( stdout, "title( 'FLAME trinv\\_u performance (%s)' );\n", 
           m_dim_desc );
  fprintf( stdout, "print -depsc trinv_l_%s.eps\n", m_dim_tag );
  fprintf( stdout, "hold off;\n");
  fflush( stdout );
*/

  FLA_Finalize( );
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:101，代码来源:test_Trinv_uu.c

示例4: FLA_Hevd_lv_var3_components

FLA_Error FLA_Hevd_lv_var3_components( dim_t n_iter_max, FLA_Obj A, FLA_Obj l, dim_t k_accum, dim_t b_alg,
                                       double* dtime_tred, double* dtime_tevd, double* dtime_appq )
{
	FLA_Error    r_val = FLA_SUCCESS;
	FLA_Uplo     uplo = FLA_LOWER_TRIANGULAR;
	FLA_Datatype dt;
	FLA_Datatype dt_real;
	FLA_Datatype dt_comp;
	FLA_Obj      T, r, d, e, G;
	FLA_Obj      d0, e0, ls, pu;
	dim_t        mn_A;
	dim_t        n_G = k_accum;
	double       dtime_temp;

	mn_A    = FLA_Obj_length( A );
	dt      = FLA_Obj_datatype( A );
	dt_real = FLA_Obj_datatype_proj_to_real( A );
	dt_comp = FLA_Obj_datatype_proj_to_complex( A );

	// If the matrix is a scalar, then the EVD is easy.
	if ( mn_A == 1 )
	{
		FLA_Copy( A, l );
		FLA_Set( FLA_ONE, A );

		return FLA_SUCCESS;
	}

	// Create a matrix to hold block Householder transformations.
	FLA_Tridiag_UT_create_T( A, &T );

	// Create a vector to hold the realifying scalars.
	FLA_Obj_create( dt,      mn_A,     1, 0, 0, &r );

	// Create vectors to hold the diagonal and sub-diagonal.
	FLA_Obj_create( dt_real, mn_A,     1, 0, 0, &d );
	FLA_Obj_create( dt_real, mn_A-1,   1, 0, 0, &e );
	FLA_Obj_create( dt_real, mn_A,     1, 0, 0, &d0 );
	FLA_Obj_create( dt_real, mn_A-1,   1, 0, 0, &e0 );
	FLA_Obj_create( dt_real, mn_A,     1, 0, 0, &pu );
	FLA_Obj_create( FLA_INT, mn_A,     1, 0, 0, &ls );
	FLA_Obj_create( dt_comp, mn_A-1, n_G, 0, 0, &G );


  dtime_temp = FLA_Clock();
  {
	// Reduce the matrix to tridiagonal form.
	FLA_Tridiag_UT( uplo, A, T );
  }
  *dtime_tred = FLA_Clock() - dtime_temp;

	// Apply scalars to rotate elements on the sub-diagonal to the real domain.
	FLA_Tridiag_UT_realify( uplo, A, r );

	// Extract the diagonal and sub-diagonal from A.
	FLA_Tridiag_UT_extract_diagonals( uplo, A, d, e );

  dtime_temp = FLA_Clock();
  {
	// Form Q, overwriting A.
	FLA_Tridiag_UT_form_Q( uplo, A, T );
  }
  *dtime_appq = FLA_Clock() - dtime_temp;

	// Apply the scalars in r to Q.
	FLA_Apply_diag_matrix( FLA_RIGHT, FLA_CONJUGATE, r, A );

	// Find the eigenvalues only.
	FLA_Copy( d, d0 ); FLA_Copy( e, e0 );
	//r_val = FLA_Tevd_n_opt_var1( n_iter_max, d0, e0, G, A );
{
	int info;
	double* buff_d = FLA_DOUBLE_PTR( d0 );
	double* buff_e = FLA_DOUBLE_PTR( e0 );
	dsterf_( &mn_A, buff_d, buff_e, &info );
}
	FLA_Sort( FLA_FORWARD, d0 );
	FLA_Set( FLA_ZERO, ls );
	FLA_Set( FLA_ZERO, pu );

  dtime_temp = FLA_Clock();
  {
	// Perform an eigenvalue decomposition on the tridiagonal matrix.
	r_val = FLA_Tevd_v_opt_var3( n_iter_max, d, e, d0, ls, pu, G, A, b_alg );
  }
  *dtime_tevd = FLA_Clock() - dtime_temp;
//FLA_Obj_show( "var4: e", e, "%22.15e", "" );

	// Copy the converged eigenvalues to the output vector.
	FLA_Copy( d, l );

	// Sort the eigenvalues and eigenvectors in ascending order.
	FLA_Sort_evd( FLA_FORWARD, l, A );
//FLA_Obj_show( "var4: d", l, "%22.15e", "" );
//FLA_Obj_show( "var4: A", A, "%8.1e + %8.1e", "" );
	//FLA_Copy( d0, l );


	FLA_Obj_free( &T );
	FLA_Obj_free( &r );
//.........这里部分代码省略.........

开发者ID:pgawron，项目名称:tlash，代码行数:101，代码来源:FLA_Hevd_lv_var3_components.c

示例5: time_Trsm_lln


//.........这里部分代码省略.........
                FLA_ONE, A, C );
      break;

    case 1:{
      // Time variant 1
      switch( type ){
      case FLA_ALG_UNBLOCKED:
        FLA_Trsm_lln_unb_var1( FLA_NONUNIT_DIAG, FLA_ONE, A, C );
        break;
      case FLA_ALG_BLOCKED:
        FLA_Trsm_lln_blk_var1( FLA_NONUNIT_DIAG, FLA_ONE, A, C, cntl_trsm_var );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }

    case 2:{
      // Time variant 2
      switch( type ){
      case FLA_ALG_UNBLOCKED:
        FLA_Trsm_lln_unb_var2( FLA_NONUNIT_DIAG, FLA_ONE, A, C );
        break;
      case FLA_ALG_BLOCKED:
        FLA_Trsm_lln_blk_var2( FLA_NONUNIT_DIAG, FLA_ONE, A, C, cntl_trsm_var );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }

    case 3:{
      // Time variant 3
      switch( type ){
      case FLA_ALG_UNBLOCKED:
        FLA_Trsm_lln_unb_var3( FLA_NONUNIT_DIAG, FLA_ONE, A, C );
        break;
      case FLA_ALG_BLOCKED:
        FLA_Trsm_lln_blk_var3( FLA_NONUNIT_DIAG, FLA_ONE, A, C, cntl_trsm_var );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }

    case 4:{
      // Time variant 4
      switch( type ){
      case FLA_ALG_UNBLOCKED:
        FLA_Trsm_lln_unb_var4( FLA_NONUNIT_DIAG, FLA_ONE, A, C );
        break;
      case FLA_ALG_BLOCKED:
        FLA_Trsm_lln_blk_var4( FLA_NONUNIT_DIAG, FLA_ONE, A, C, cntl_trsm_var );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    }

    *dtime = FLA_Clock() - *dtime;
    dtime_old = min( *dtime, dtime_old );
  }

  FLA_Cntl_obj_free( cntl_trsm_var );
  FLA_Cntl_obj_free( cntl_trsm_blas );
  FLA_Cntl_obj_free( cntl_gemm_blas );
  FLA_Blocksize_free( bp );

  if ( variant == 0 )
  {
    FLA_Copy_external( C, C_ref );
    *diff = 0.0;
  }
  else
  {
    *diff = FLA_Max_elemwise_diff( C, C_ref );
  }

  *gflops = 1.0 * 
            FLA_Obj_length( C ) * 
            FLA_Obj_width( C ) * 
            FLA_Obj_width( A ) / 
            dtime_old / 
            1.0e9;

  *dtime = dtime_old;

  FLA_Copy_external( C_old, C );

  FLA_Obj_free( &C_old );
}

开发者ID:pgawron，项目名称:tlash，代码行数:101，代码来源:time_Trsm_lln.c

示例6: REF_Svdd_uv_components


//.........这里部分代码省略.........
      *dtime_qrfa = 0.0;
      *dtime_gemm = 0.0;
    }
    else
    {
      FLA_Obj AT,
              AB;
      FLA_Obj UL, UR;

      FLA_Part_2x1( A,   &AT,
                         &AB,        n_A, FLA_TOP );
      FLA_Part_1x2( U,   &UL, &UR,   n_A, FLA_LEFT );

      // Create a temporary n-by-n matrix R.
      FLA_Obj_create( dt_A, n_A, n_A, 0, 0, &W );

      dtime_temp = FLA_Clock();
      {
        // Perform a QR factorization.
        FLA_QR_blk_external( A, tq );
        FLA_Copyr_external( FLA_LOWER_TRIANGULAR, A, UL );
        FLA_Setr( FLA_LOWER_TRIANGULAR, FLA_ZERO, A );
      }
      *dtime_qrfa = FLA_Clock() - dtime_temp;


      dtime_temp = FLA_Clock();
      {
        // Form Q.
        FLA_QR_form_Q_external( U, tq );
      }
      *dtime_appq = FLA_Clock() - dtime_temp;


      dtime_temp = FLA_Clock();
      {
        // Reduce R to bidiagonal form.
        FLA_Bidiag_blk_external( AT, tu, tv );
        FLA_Bidiag_UT_extract_diagonals( A, d, eT );
      }
      *dtime_bred = FLA_Clock() - dtime_temp;


      dtime_temp = FLA_Clock();
      {
        // Divide-and-conquor algorithm.
        FLA_Bsvdd_external( uplo, d, e, Ur, Vr );
      }
      *dtime_bsvd = FLA_Clock() - dtime_temp;


      dtime_temp = FLA_Clock();
      {
        // Form U in W.
        FLA_Copy_external( Ur, W );
        FLA_Bidiag_apply_U_external( FLA_LEFT, FLA_NO_TRANSPOSE, AT, tu, W );

        // Form V.
        FLA_Copy_external( Vr, V );
        FLA_Bidiag_apply_V_external( FLA_RIGHT, FLA_CONJ_TRANSPOSE, AT, tv, V );
      }
      *dtime_appq += FLA_Clock() - dtime_temp;


      dtime_temp = FLA_Clock();
      {
        // Multiply R into U, storing the result in A and then copying
        // back to U.
        FLA_Gemm_external( FLA_NO_TRANSPOSE, FLA_NO_TRANSPOSE,
                           FLA_ONE, UL, W, FLA_ZERO, A );
        FLA_Copy( A, UL );
      }
      *dtime_gemm = FLA_Clock() - dtime_temp;


      // Free R.
      FLA_Obj_free( &W );
    }
  }
  else
  {
    FLA_Check_error_code( FLA_NOT_YET_IMPLEMENTED );
  }

  // Copy singular values to output vector.
  FLA_Copy( d, s );

  // Sort singular values and vectors.
  FLA_Sort_svd( FLA_BACKWARD, s, U, V );

  FLA_Obj_free( &tq );
  FLA_Obj_free( &tu );
  FLA_Obj_free( &tv );
  FLA_Obj_free( &d );
  FLA_Obj_free( &e );
  FLA_Obj_free( &Ur );
  FLA_Obj_free( &Vr );

  return FLA_SUCCESS;
}

开发者ID:pgawron，项目名称:tlash，代码行数:101，代码来源:REF_Svdd_uv_components.c

示例7: main


//.........这里部分代码省略.........

    for ( param_combo = 0; param_combo < n_param_combos; param_combo++ ){

      // Determine datatype based on trans argument.
      if ( pc_str[param_combo][2] == 'h' )
      {
        if ( precision == FLA_SINGLE_PRECISION )
          datatype = FLA_COMPLEX;
        else
          datatype = FLA_DOUBLE_COMPLEX;
      }
      else
      {
        if ( precision == FLA_SINGLE_PRECISION )
          datatype = FLA_FLOAT;
        else
          datatype = FLA_DOUBLE;
      }

      // If multiplying A on the left, A is m x m; ...on the right, A is n x n.
      if ( pc_str[param_combo][0] == 'l' )
        FLA_Obj_create( datatype, m, m, 0, 0, &A );
      else
        FLA_Obj_create( datatype, n, n, 0, 0, &A );

      FLA_Obj_create( datatype, m, n, 0, 0, &C );
      FLA_Obj_create( datatype, m, n, 0, 0, &C_ref );

      if ( pc_str[param_combo][1] == 'l' )
      {
        FLA_Random_tri_matrix( FLA_LOWER_TRIANGULAR, FLA_NONUNIT_DIAG, A );
        FLA_Random_matrix( C );
      }
      else
      {
        FLA_Random_tri_matrix( FLA_UPPER_TRIANGULAR, FLA_NONUNIT_DIAG, A );
        FLA_Random_matrix( C );
      }

      fprintf( stdout, "data_trsm_%s( %d, 1:3 ) = [ %d  ", pc_str[param_combo], i, p );
      fflush( stdout );

      time_Trsm( param_combo, FLA_ALG_REFERENCE, n_repeats, m, n,
                 A, C, C_ref, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );
/*
      time_Trsm( param_combo, FLA_ALG_FRONT, n_repeats, m, n,
                 A, C, C_ref, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );
*/

      fprintf( stdout, " ]; \n" );
      fflush( stdout );

      FLA_Obj_free( &A );
      FLA_Obj_free( &C );
      FLA_Obj_free( &C_ref );
    }

    fprintf( stdout, "\n" );
  }

/*
  fprintf( stdout, "figure;\n" );

  fprintf( stdout, "hold on;\n" );

  for ( i = 0; i < n_param_combos; i++ ) {
    fprintf( stdout, "plot( data_trsm_%s( :,1 ), data_trsm_%s( :, 2 ), '%c:%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
    fprintf( stdout, "plot( data_trsm_%s( :,1 ), data_trsm_%s( :, 4 ), '%c-.%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
  }

  fprintf( stdout, "legend( ... \n" );

  for ( i = 0; i < n_param_combos; i++ )
    fprintf( stdout, "'ref\\_trsm\\_%s', 'fla\\_trsm\\_%s', ... \n", pc_str[i], pc_str[i] );

  fprintf( stdout, "'Location', 'SouthEast' ); \n" );


  fprintf( stdout, "xlabel( 'problem size p' );\n" );
  fprintf( stdout, "ylabel( 'GFLOPS/sec.' );\n" );
  fprintf( stdout, "axis( [ 0 %d 0 %.2f ] ); \n", p_last, max_gflops );
  fprintf( stdout, "title( 'FLAME trsm front-end performance (%s, %s)' );\n",
           m_dim_desc, n_dim_desc );
  fprintf( stdout, "print -depsc trsm_front_%s_%s.eps\n", m_dim_tag, n_dim_tag );
  fprintf( stdout, "hold off;\n");
  fflush( stdout );
*/

  FLA_Finalize( );

  return 0;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:101，代码来源:test_Trsm.c

示例8: time_Gemm_nn


//.........这里部分代码省略.........
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    case 15:{
      // Time variant 1->5
      switch( type ){
      case FLA_ALG_OPENMP_CVAR:
        FLA_Gemm_nn_omp_var15( FLA_ONE, A, B, C, nb_alg );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    case 31:{
      // Time variant 3->1 
      switch( type ){
      case FLA_ALG_OPENMP_CVAR:
        FLA_Gemm_nn_omp_var31( FLA_ONE, A, B, C, nb_alg );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    case 35:{
      // Time variant 3->5 
      switch( type ){
      case FLA_ALG_OPENMP_CVAR:
        FLA_Gemm_nn_omp_var35( FLA_ONE, A, B, C, nb_alg );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    case 51:{
      // Time variant 5->1 
      switch( type ){
      case FLA_ALG_OPENMP_CVAR:
        FLA_Gemm_nn_omp_var51( FLA_ONE, A, B, C, nb_alg );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    case 53:{
      // Time variant 5->3 
      switch( type ){
      case FLA_ALG_OPENMP_CVAR:
        FLA_Gemm_nn_omp_var53( FLA_ONE, A, B, C, nb_alg );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    }

    if ( irep == 0 )
      dtime_old = FLA_Clock() - *dtime;
    else{
      *dtime = FLA_Clock() - *dtime;
      dtime_old = min( *dtime, dtime_old );
    }
  }


  if ( variant == 0 ){
    FLA_Copy_external( C, Cref );
    *diff = 0.0;
  }
  else{
    *diff = FLA_Max_elemwise_diff( C, Cref );
    //FLA_Obj_show( "C:", C, "%f", "\n");
  }

  *gflops = 2.0 * 
            FLA_Obj_length( C ) * 
            FLA_Obj_width( C ) * 
            FLA_Obj_width( A ) / 
            dtime_old / 
            1e9;

  *dtime = dtime_old;

  FLA_Copy_external( Cold, C );

  FLA_Obj_free( &Cold );
}

开发者ID:pgawron，项目名称:tlash，代码行数:101，代码来源:time_Gemm_nn.c

示例9: FLA_Gemm_nn_omp_var15

FLA_Error FLA_Gemm_nn_omp_var15( FLA_Obj alpha, FLA_Obj A, FLA_Obj B, FLA_Obj C, fla_gemm_t* cntl )
{
  FLA_Obj AT,              A0,
          AB,              A1,
                           A2;

  FLA_Obj CT,              C0,
          CB,              C1,
                           C2;

  FLA_Obj AL,    AR,       A10,  A11,  A12;

  FLA_Obj BT,              B0,
          BB,              B1,
                           B2;
  FLA_Obj C1_local;

  int i, j, lock_ldim, lock_i;
  int b_m, b_k;

  FLA_Part_2x1( A,    &AT, 
                      &AB,            0, FLA_TOP );

  FLA_Part_2x1( C,    &CT, 
                      &CB,            0, FLA_TOP );

  #pragma intel omp parallel taskq
  {
  while ( FLA_Obj_length( AT ) < FLA_Obj_length( A ) )
  {
    b_m = FLA_Determine_blocksize( A, AT, FLA_TOP, FLA_Cntl_blocksize( cntl ) );

    FLA_Repart_2x1_to_3x1( AT,                &A0, 
                        /* ** */            /* ** */
                                              &A1, 
                           AB,                &A2,        b_m, FLA_BOTTOM );

    FLA_Repart_2x1_to_3x1( CT,                &C0, 
                        /* ** */            /* ** */
                                              &C1, 
                           CB,                &C2,        b_m, FLA_BOTTOM );

    /*------------------------------------------------------------*/

    /* C1 = alpha * A1 * B + C1; */
  
    FLA_Part_1x2( A1,   &AL,  &AR,      0, FLA_LEFT );

    FLA_Part_2x1( B,    &BT, 
                        &BB,            0, FLA_TOP );
  
    while ( FLA_Obj_width( AL ) < FLA_Obj_width( A ) )
    {
      b_k = FLA_Determine_blocksize( A, AL, FLA_LEFT, FLA_Cntl_blocksize( cntl ) );

      // Get the index of the current partition.
      // FIX THIS: need + b_m - 1 or something like this
      //j = FLA_Obj_length( CT ) / b_m;
      //i = FLA_Obj_width( AL ) / b_k;
      //lock_ldim = FLA_get_num_threads_in_m_dim(omp_get_num_threads());
      lock_i = FLA_Obj_length( CT ) / b_m;
  
      FLA_Repart_1x2_to_1x3( AL,  /**/ AR,        &A10, /**/ &A11, &A12,
                             b_k, FLA_RIGHT );

      FLA_Repart_2x1_to_3x1( BT,                &B0, 
                          /* ** */            /* ** */
                                                &B1, 
                             BB,                &B2,        b_k, FLA_BOTTOM );
  
      /*------------------------------------------------------------*/
  
      /*    C1 = alpha * A11 * B1 + C1; */
      //// FLA_Gemm( FLA_NO_TRANSPOSE, FLA_NO_TRANSPOSE,
      ////           alpha, A11, B1, FLA_ONE, C1 );

      #pragma intel omp task captureprivate( lock_i, A11, B1, C1 ), private( C1_local )
      {
      FLA_Obj_create_conf_to( FLA_NO_TRANSPOSE, C1, &C1_local );
      FLA_Obj_set_to_zero( C1_local );

      /*    C1_local = alpha * A1 * B11 + C1_local; */
      FLA_Gemm_external( FLA_NO_TRANSPOSE, FLA_NO_TRANSPOSE,
                         alpha, A11, B1, FLA_ONE, C1_local );

      // Acquire lock[i] (the lock for C1).
      omp_set_lock( &fla_omp_lock[lock_i] );

      /* C1 += C1_local */
      FLA_Axpy_external( FLA_ONE, C1_local, C1 );
      //FLA_Axpy_sync_pipeline2( j*lock_ldim, FLA_ONE, C1_local, C1 );
      //FLA_Axpy_sync_circular2( j*lock_ldim, i, FLA_ONE, C1_local, C1 );
      //REF_Axpy_sync_circular2( j*lock_ldim, i, FLA_ONE, C1_local, C1 );

      // Release lock[i] (the lock for C1).
      omp_unset_lock( &fla_omp_lock[lock_i] );

      FLA_Obj_free( &C1_local );
      }
  
//.........这里部分代码省略.........

开发者ID:pgawron，项目名称:tlash，代码行数:101，代码来源:FLA_Gemm_nn_omp_cvar15.c

示例10: time_Syrk_ln


//.........这里部分代码省略.........
      switch( type ){
      case FLA_ALG_OPENMP_1TASK:
        FLA_Syrk_ln_omp1t_var2( A, C );
        break;
      case FLA_ALG_OPENMP_2TASKS:
        FLA_Syrk_ln_omp2t_var2( A, C );
        break;
      case FLA_ALG_OPENMP_2LOOPS:
        FLA_Syrk_ln_omp2l_var2( A, C );
        break;
      case FLA_ALG_OPENMP_2LOOPSPLUS:
        FLA_Syrk_ln_omp2x_var2( A, C );
        break;
      default:
        printf("trouble\n");
      }

      break;
    } 
    case 3:{
      // Time variant 3 
      switch( type ){
      case FLA_ALG_OPENMP_1TASK:
        FLA_Syrk_ln_omp1t_var3( A, C );
        break;
      case FLA_ALG_OPENMP_2TASKS:
        FLA_Syrk_ln_omp2t_var3( A, C );
        break;
      case FLA_ALG_OPENMP_2LOOPS:
        FLA_Syrk_ln_omp2l_var3( A, C );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    case 4:{
      // Time variant 4
      switch( type ){
      case FLA_ALG_OPENMP_1TASK:
        FLA_Syrk_ln_omp1t_var4( A, C );
        break;
      case FLA_ALG_OPENMP_2TASKS:
        FLA_Syrk_ln_omp2t_var4( A, C );
        break;
      case FLA_ALG_OPENMP_2LOOPS:
        FLA_Syrk_ln_omp2l_var4( A, C );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    case 5:{
      // Time variant 5
      switch( type ){
      case FLA_ALG_OPENMP_1TASK:
        FLA_Syrk_ln_omp1t_var5( A, C );
        break;
      default:
        printf("trouble\n");
      }

      break;
    }
    }

    if ( irep == 0 )
      dtime_old = FLA_Clock() - *dtime;
    else{
      *dtime = FLA_Clock() - *dtime;
      dtime_old = min( *dtime, dtime_old );
    }
  }


  if ( variant == 0 ){
    FLA_Copy_external( C, C_ref );
    *diff = 0.0;
  }
  else{
    *diff = FLA_Max_elemwise_diff( C, C_ref );
    //FLA_Obj_show( "C:", C, "%f", "\n");
  }

  *gflops = 1.0 * 
            FLA_Obj_length( A ) * 
            FLA_Obj_length( A ) * 
            FLA_Obj_width( A ) / 
            dtime_old / 
            1e9;

  *dtime = dtime_old;

  FLA_Copy_external( C_old, C );

  FLA_Obj_free( &C_old );
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:101，代码来源:time_Syrk_ln.c

示例11: main

int main( int argc, char** argv ) {
  FLA_Datatype testtype = TESTTYPE;
  dim_t        m;
  FLA_Obj      A;
  FLA_Obj      a1, b1, r1;
  FLA_Obj      a2, b2, r2;
  FLA_Uplo     uplo;
  FLA_Error    init_result; 

  if ( argc == 3 ) {
    m = atoi(argv[1]);
    uplo = ( atoi(argv[2]) == 1  ? FLA_UPPER_TRIANGULAR : FLA_LOWER_TRIANGULAR );
  } else {
    fprintf(stderr, "       \n");
    fprintf(stderr, "Usage: %s m uplo\n", argv[0]);
    fprintf(stderr, "       m    : test matrix length\n");
    fprintf(stderr, "       uplo : 0) lower, 1) upper\n");
    fprintf(stderr, "       \n");
    return -1;
  }
  if ( m == 0 )
    return 0;

  FLA_Init_safe( &init_result );          

  // Test matrix A 
  FLA_Obj_create( testtype, m, m, 0, 0, &A );
  FLA_Random_spd_matrix( uplo, A );
  FLA_Hermitianize( uplo, A );
  FLA_Obj_fshow( stdout,  "- A -", A, "% 6.4e", "--" );

  FLA_Obj_create( testtype, m, 1, 0, 0, &a1 );
  FLA_Obj_create( testtype, m, 1, 0, 0, &a2 );

  if ( m > 1 ) {
    FLA_Obj_create( testtype, m-1, 1, 0, 0, &b1 );
    FLA_Obj_create( testtype, m-1, 1, 0, 0, &b2 );
  }
  
  FLA_Obj_create( testtype, m, 1, 0, 0, &r1 );
  FLA_Obj_create( testtype, m, 1, 0, 0, &r2 );

  // Mine 
  FLA_Tridiag_UT_extract_diagonals( uplo, A, a1, b1 );
  FLA_Obj_fshow( stdout,  "- a1 -", a1, "% 6.4e", "--" );  
  if ( m > 1 ) FLA_Obj_fshow( stdout,  "- b1 -", b1, "% 6.4e", "--" );  

  FLA_Tridiag_UT_realify_subdiagonal( b1, r1 );
  if ( m > 1 ) FLA_Obj_fshow( stdout,  "- b1 realified -", b1, "% 6.4e", "--" );  
  FLA_Obj_fshow( stdout,  "- r1 -", r1, "% 6.4e", "--" );  

  
  // Field
  FLA_Tridiag_UT_realify( uplo, A, r2 );
  FLA_Tridiag_UT_extract_diagonals( uplo, A, a2, b2 );
  FLA_Obj_fshow( stdout,  "- a2  -", a2, "% 6.4e", "--" );  
  if ( m > 1 ) FLA_Obj_fshow( stdout,  "- b2 realified -", b2, "% 6.4e", "--" );  
  FLA_Obj_fshow( stdout,  "- r2 -", r2, "% 6.4e", "--" );  

  printf(" diff_a  = %e\n", FLA_Max_elemwise_diff( a1, a2 ));
  if ( m > 1 ) printf(" diff_b  = %e\n", FLA_Max_elemwise_diff( b1, b2 ));
  printf(" diff_rL = %e\n", FLA_Max_elemwise_diff( r1, r2 ));

  FLA_Obj_fshow( stdout,  "- A realified-", A, "% 6.4e", "--" );

  FLA_Obj_free( &r2 );
  FLA_Obj_free( &r1 );

  if ( m > 1 ) {
    FLA_Obj_free( &b2 );
    FLA_Obj_free( &b1 );
  }

  FLA_Obj_free( &a2 );
  FLA_Obj_free( &a1 );

  FLA_Obj_free( &A );

  FLA_Finalize_safe( init_result );     
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:80，代码来源:tridiag_realify_diagonals.c

示例12: main


//.........这里部分代码省略.........
        sprintf( n_dim_desc, "n = %d", n_input );
        sprintf( n_dim_tag,  "n%dc", n_input);
    }
    else if( n_input <  -1 ) {
        sprintf( n_dim_desc, "n = p/%d", -n_input );
        sprintf( n_dim_tag,  "n%dp", -n_input );
    }
    else if( n_input == -1 ) {
        sprintf( n_dim_desc, "n = p" );
        sprintf( n_dim_tag,  "n%dp", 1 );
    }

    //datatype = FLA_FLOAT;
    //datatype = FLA_DOUBLE;
    //datatype = FLA_COMPLEX;
    datatype = FLA_DOUBLE_COMPLEX;

    for ( p = p_first, i = 1; p <= p_last; p += p_inc, i += 1 )
    {
        m = m_input;
        n = n_input;

        if( m < 0 ) m = p / abs(m_input);
        if( n < 0 ) n = p / abs(n_input);

        for ( param_combo = 0; param_combo < n_param_combos; param_combo++ ) {

            if ( pc_str[param_combo][0] == 'n' || pc_str[param_combo][0] == 'c' )
                FLA_Obj_create( datatype, m, n, &A );
            else
                FLA_Obj_create( datatype, n, m, &A );

            FLA_Obj_create( datatype, m, n, &C );
            FLA_Obj_create( datatype, m, n, &C_ref );

            FLA_Random_matrix( A );
            FLA_Random_matrix( C );

            FLA_Copy_external( C, C_ref );


            fprintf( stdout, "data_axpyt_%s( %d, 1:5 ) = [ %d  ", pc_str[param_combo], i, p );
            fflush( stdout );

            time_Axpyt( param_combo, FLA_ALG_REFERENCE, n_repeats, m, n,
                        A, C, C_ref, &dtime, &diff, &gflops );

            fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
            fflush( stdout );

            time_Axpyt( param_combo, FLA_ALG_FRONT, n_repeats, m, n,
                        A, C, C_ref, &dtime, &diff, &gflops );

            fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
            fflush( stdout );


            fprintf( stdout, " ]; \n" );
            fflush( stdout );

            FLA_Obj_free( &A );
            FLA_Obj_free( &C );
            FLA_Obj_free( &C_ref );
        }

        fprintf( stdout, "\n" );
    }

    fprintf( stdout, "figure;\n" );

    fprintf( stdout, "hold on;\n" );

    for ( i = 0; i < n_param_combos; i++ ) {
        fprintf( stdout, "plot( data_axpyt_%s( :,1 ), data_axpyt_%s( :, 2 ), '%c:%c' ); \n",
                 pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
        fprintf( stdout, "plot( data_axpyt_%s( :,1 ), data_axpyt_%s( :, 4 ), '%c-.%c' ); \n",
                 pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
    }

    fprintf( stdout, "legend( ... \n" );

    for ( i = 0; i < n_param_combos; i++ )
        fprintf( stdout, "'ref\\_axpyt\\_%s', 'fla\\_axpyt\\_%s', ... \n", pc_str[i], pc_str[i] );

    fprintf( stdout, "'Location', 'SouthEast' ); \n" );


    fprintf( stdout, "xlabel( 'problem size p' );\n" );
    fprintf( stdout, "ylabel( 'GFLOPS/sec.' );\n" );
    fprintf( stdout, "axis( [ 0 %d 0 %.2f ] ); \n", p_last, max_gflops );
    fprintf( stdout, "title( 'FLAME axpyt front-end performance (%s, %s)' );\n",
             m_dim_desc, n_dim_desc );
    fprintf( stdout, "print -depsc axpyt_front_%s_%s.eps\n", m_dim_tag, n_dim_tag );
    fprintf( stdout, "hold off;\n");
    fflush( stdout );

    FLA_Finalize( );

    return 0;
}

开发者ID:fmarrabal，项目名称:libflame，代码行数:101，代码来源:test_Axpyt.c

示例13: main


//.........这里部分代码省略.........
    sprintf( k_dim_desc, "k = p" );
    sprintf( k_dim_tag,  "k%dp", 1 );
  }

  //datatype = FLA_FLOAT;
  datatype = FLA_DOUBLE;
  //datatype = FLA_COMPLEX;
  //datatype = FLA_DOUBLE_COMPLEX;

  for ( p = p_first, i = 1; p <= p_last; p += p_inc, i += 1 )
  {
    m = m_input;
    k = k_input;

    if( m < 0 ) m = p / f2c_abs(m_input);
    if( k < 0 ) k = p / f2c_abs(k_input);

    for ( param_combo = 0; param_combo < n_param_combos; param_combo++ ){

      // If transposing A, switch dimensions.
      if ( pc_str[param_combo][1] == 'n' )
      {
        FLA_Obj_create( datatype, m, k, 0, 0, &A );
        FLA_Obj_create( datatype, m, k, 0, 0, &B );
      }
      else
      {
        FLA_Obj_create( datatype, k, m, 0, 0, &A );
        FLA_Obj_create( datatype, k, m, 0, 0, &B );
      }

      FLA_Obj_create( datatype, m, m, 0, 0, &C );
      FLA_Obj_create( datatype, m, m, 0, 0, &C_ref );

      FLA_Random_matrix( A );
      FLA_Random_matrix( B );
      FLA_Random_matrix( C );

      fprintf( stdout, "data_syr2k_%s( %d, 1:3 ) = [ %d  ", pc_str[param_combo], i, p );
      fflush( stdout );

      time_Syr2k( param_combo, FLA_ALG_REFERENCE, n_repeats, m, k,
                 A, B, C, C_ref, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );
/*
      time_Syr2k( param_combo, FLA_ALG_FRONT, n_repeats, m, k,
                 A, B, C, C_ref, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );
*/

      fprintf( stdout, " ]; \n" );
      fflush( stdout );

      FLA_Obj_free( &A );
      FLA_Obj_free( &B );
      FLA_Obj_free( &C );
      FLA_Obj_free( &C_ref );
    }

    fprintf( stdout, "\n" );
  }

/*
  fprintf( stdout, "figure;\n" );

  fprintf( stdout, "hold on;\n" );

  for ( i = 0; i < n_param_combos; i++ ) {
    fprintf( stdout, "plot( data_syr2k_%s( :,1 ), data_syr2k_%s( :, 2 ), '%c:%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
    fprintf( stdout, "plot( data_syr2k_%s( :,1 ), data_syr2k_%s( :, 4 ), '%c-.%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
  }

  fprintf( stdout, "legend( ... \n" );

  for ( i = 0; i < n_param_combos; i++ )
    fprintf( stdout, "'ref\\_syr2k\\_%s', 'fla\\_syr2k\\_%s', ... \n", pc_str[i], pc_str[i] );

  fprintf( stdout, "'Location', 'SouthEast' ); \n" );


  fprintf( stdout, "xlabel( 'problem size p' );\n" );
  fprintf( stdout, "ylabel( 'GFLOPS/sec.' );\n" );
  fprintf( stdout, "axis( [ 0 %d 0 %.2f ] ); \n", p_last, max_gflops );
  fprintf( stdout, "title( 'FLAME syr2k front-end performance (%s, %s)' );\n",
           m_dim_desc, k_dim_desc );
  fprintf( stdout, "print -depsc syr2k_front_%s_%s.eps\n", m_dim_tag, k_dim_tag );
  fprintf( stdout, "hold off;\n");
  fflush( stdout );
*/

  FLA_Finalize( );

  return 0;
}

开发者ID:flame，项目名称:libflame，代码行数:101，代码来源:test_Syr2k.c

示例14: main


//.........这里部分代码省略.........

    if( m < 0 ) m = p / f2c_abs(m_input);

    //datatype = FLA_FLOAT;
    //datatype = FLA_DOUBLE;
    //datatype = FLA_COMPLEX;
    datatype = FLA_DOUBLE_COMPLEX;

    FLA_Obj_create( datatype, m, m, 0, 0, &A );
    FLA_Obj_create( datatype, m, m, 0, 0, &Y );
    FLA_Obj_create( datatype, m, m, 0, 0, &B );

    FLA_Random_spd_matrix( uplo, A );
    FLA_Hermitianize( uplo, A );

    FLA_Random_spd_matrix( uplo, B );
    FLA_Chol( uplo, B );

/*
    time_Eig_gest_nu( 0, FLA_ALG_REFERENCE, n_repeats, p, b_alg,
                      inv, uplo, A, B, &dtime, &diff, &gflops );

    fprintf( stdout, "data_REF( %d, 1:2 ) = [ %d  %6.3lf ]; \n", i, p, gflops );
    fflush( stdout );
*/

    for ( variant = 1; variant <= n_variants; variant++ ){
      
      fprintf( stdout, "data_var%d( %d, 1:7 ) = [ %d  ", variant, i, p );
      fflush( stdout );

      time_Eig_gest_nu( variant, FLA_ALG_UNBLOCKED, n_repeats, p, b_alg,
                        inv, uplo, A, Y, B, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );

      time_Eig_gest_nu( variant, FLA_ALG_UNB_OPT, n_repeats, p, b_alg,
                        inv, uplo, A, Y, B, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );

      time_Eig_gest_nu( variant, FLA_ALG_BLOCKED, n_repeats, p, b_alg,
                        inv, uplo, A, Y, B, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );

      fprintf( stdout, " ]; \n" );
      fflush( stdout );
    }

    FLA_Obj_free( &A );
    FLA_Obj_free( &Y );
    FLA_Obj_free( &B );

    fprintf( stdout, "\n" );
  }

/*
  // Print the MATLAB commands to plot the data

  // Delete all existing figures
  fprintf( stdout, "figure;\n" );

  // Plot the performance of the reference implementation
  fprintf( stdout, "plot( data_REF( :,1 ), data_REF( :, 2 ), '-' ); \n" );

  // Indicate that you want to add to the existing plot
  fprintf( stdout, "hold on;\n" );

  // Plot the data for the other numbers of threads
  for ( i = 1; i <= n_variants; i++ ){
    fprintf( stdout, "plot( data_var%d( :,1 ), data_var%d( :, 2 ), '%c:%c' ); \n", 
             i, i, colors[ i-1 ], ticks[ i-1 ] );
  }

  fprintf( stdout, "legend( ... \n" );
  fprintf( stdout, "'Reference', ... \n" );

  for ( i = 1; i <= n_variants; i++ )
    fprintf( stdout, "'FLAME var%d', ... \n", i );

  fprintf( stdout, "'Location', 'SouthEast' ); \n" );

  fprintf( stdout, "xlabel( 'problem size p' );\n" );
  fprintf( stdout, "ylabel( 'GFLOPS/sec.' );\n" );
  fprintf( stdout, "axis( [ 0 %d 0 %.2f ] ); \n", p_last, max_gflops );
  fprintf( stdout, "title( 'FLAME chol\\_l performance (%s)' );\n", 
           m_dim_desc );
  fprintf( stdout, "print -depsc chol_l_%s.eps\n", m_dim_tag );
  fprintf( stdout, "hold off;\n");
  fflush( stdout );
*/

  FLA_Finalize( );

  return 0;
}

开发者ID:flame，项目名称:libflame，代码行数:101，代码来源:test_Eig_gest_nu.c

示例15: main


//.........这里部分代码省略.........
  else if( m_input <  -1 ) {
    sprintf( m_dim_desc, "m = p/%d", -m_input );
    sprintf( m_dim_tag,  "m%dp", -m_input );
  }
  else if( m_input == -1 ) {
    sprintf( m_dim_desc, "m = p" );
    sprintf( m_dim_tag,  "m%dp", 1 );
  }


  //datatype = FLA_FLOAT;
  //datatype = FLA_DOUBLE;
  //datatype = FLA_COMPLEX;
  datatype = FLA_DOUBLE_COMPLEX;

  for ( p = p_first, i = 1; p <= p_last; p += p_inc, i += 1 )
  {
    m = m_input;

    if( m < 0 ) m = p / abs(m_input);

    for ( param_combo = 0; param_combo < n_param_combos; param_combo++ ){

      FLA_Obj_create( datatype, m, m, 0, 0, &A );
      FLA_Obj_create( datatype, m, 1, 0, 0, &b );
      FLA_Obj_create( datatype, m, 1, 0, 0, &b_orig );

      if ( FLA_Obj_is_single_precision( A ) )
        FLA_Obj_create( FLA_FLOAT, 1, 1, 0, 0, &norm );
      else
        FLA_Obj_create( FLA_DOUBLE, 1, 1, 0, 0, &norm );

      if ( pc_str[param_combo][0] == 'l' )
        FLA_Random_spd_matrix( FLA_LOWER_TRIANGULAR, A );
      else
        FLA_Random_spd_matrix( FLA_UPPER_TRIANGULAR, A );
      
      FLA_Copy_external( b, b_orig );


      fprintf( stdout, "data_chol_%s( %d, 1:5 ) = [ %d  ", pc_str[param_combo], i, p );
      fflush( stdout );

      time_Chol( param_combo, FLA_ALG_REFERENCE, n_repeats, m,
                 A, b, b_orig, norm, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );

      time_Chol( param_combo, FLA_ALG_FRONT, n_repeats, m,
                 A, b, b_orig, norm, &dtime, &diff, &gflops );

      fprintf( stdout, "%6.3lf %6.2le ", gflops, diff );
      fflush( stdout );


      fprintf( stdout, " ]; \n" );
      fflush( stdout );

      FLA_Obj_free( &A );
      FLA_Obj_free( &b );
      FLA_Obj_free( &b_orig );
      FLA_Obj_free( &norm );
    }

    fprintf( stdout, "\n" );
  }

/*
  fprintf( stdout, "figure;\n" );

  fprintf( stdout, "hold on;\n" );

  for ( i = 0; i < n_param_combos; i++ ) {
    fprintf( stdout, "plot( data_chol_%s( :,1 ), data_chol_%s( :, 2 ), '%c:%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
    fprintf( stdout, "plot( data_chol_%s( :,1 ), data_chol_%s( :, 4 ), '%c-.%c' ); \n",
            pc_str[i], pc_str[i], colors[ i ], ticks[ i ] );
  }

  fprintf( stdout, "legend( ... \n" );

  for ( i = 0; i < n_param_combos; i++ )
    fprintf( stdout, "'ref\\_chol\\_%s', 'fla\\_chol\\_%s', ... \n", pc_str[i], pc_str[i] );

  fprintf( stdout, "'Location', 'SouthEast' ); \n" );

  fprintf( stdout, "xlabel( 'problem size p' );\n" );
  fprintf( stdout, "ylabel( 'GFLOPS/sec.' );\n" );
  fprintf( stdout, "axis( [ 0 %d 0 %.2f ] ); \n", p_last, max_gflops );
  fprintf( stdout, "title( 'FLAME chol front-end performance (%s)' );\n", m_dim_desc );
  fprintf( stdout, "print -depsc chol_front_%s.eps\n", m_dim_tag );
  fprintf( stdout, "hold off;\n");
  fflush( stdout );
*/

  FLA_Finalize();

  return 0;
}

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FLA_Obj_length函数代码示例发布时间：2022-05-30

C++ FLA_Obj_datatype函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

2023-10-27

florent37/ViewAnimator: A fluent Android

2022-08-15

florent37/Shrine-MaterialDesign2: implem

2022-08-17

CVE-2020-36276

2022-09-23

SimpleSoftwareIO/simple-sms: Send and re

2022-08-13

阅读排行榜

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ FLA_Obj_free函数代码示例

示例1: main

示例2: main

示例3: main

示例4: FLA_Hevd_lv_var3_components

示例5: time_Trsm_lln

示例6: REF_Svdd_uv_components

示例7: main

示例8: time_Gemm_nn

示例9: FLA_Gemm_nn_omp_var15

示例10: time_Syrk_ln

示例11: main

示例12: main

示例13: main

示例14: main

示例15: main

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053