C++ FLA_Check_error_level函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FLA_Check_error_level函数的典型用法代码示例。如果您正苦于以下问题：C++ FLA_Check_error_level函数的具体用法？C++ FLA_Check_error_level怎么用？C++ FLA_Check_error_level使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FLA_Check_error_level函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: FLASH_LU_piv

FLA_Error FLASH_LU_piv( FLA_Obj A, FLA_Obj p )
{
  FLA_Error r_val = FLA_SUCCESS;

  // Check parameters.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_LU_piv_check( A, p );

  // *** The current LU_piv algorithm implemented assumes that
  // the matrix has a hierarchical depth of 1. We check for that here, because
  // we anticipate that we'll use a more general algorithm in the future, and
  // we don't want to forget to remove the constraint. ***
  if ( FLASH_Obj_depth( A ) != 1 )
  {
    FLA_Print_message( "FLASH_LU_piv() currently only supports matrices of depth 1",
                       __FILE__, __LINE__ );
    FLA_Abort();
  }

  // Begin a parallel region.
  FLASH_Queue_begin();

  // Invoke FLA_LU_piv_internal() with large control tree.
  FLA_LU_piv_internal( A, p, flash_lu_piv_cntl );

  // End the parallel region.
  FLASH_Queue_end();

  // Check for singularity.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    r_val = FLASH_LU_find_zero_on_diagonal( A );

  return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:34，代码来源:FLASH_LU_piv.c

示例2: FLASH_Apply_CAQ_UT_inc

FLA_Error FLASH_Apply_CAQ_UT_inc( dim_t p,
                                  FLA_Side side, FLA_Trans trans, FLA_Direct direct, FLA_Store storev,
                                  FLA_Obj A, FLA_Obj ATW, FLA_Obj R, FLA_Obj RTW, FLA_Obj W, FLA_Obj B )
{
  FLA_Error r_val;
  dim_t     nb_part;
  FLA_Obj   WT, WB;

  // Check parameters.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Apply_CAQ_UT_inc_check( side, trans, direct, storev, A, ATW, R, RTW, W, B );

  // Compute the partition length from the number of partitions.
  nb_part = FLA_CAQR_UT_inc_compute_blocks_per_part( p, R );

  // Begin a parallel region.
  FLASH_Queue_begin();

  // Apply the individual Q's from the incremental QR factorizations.
  FLA_Apply_CAQ_UT_inc_apply_panels( nb_part, A, ATW, W, B );

  FLA_Part_2x1( W,   &WT,
                     &WB,    1, FLA_TOP );

  // Apply the Q from the factorization of the upper triangular R's.
  r_val = FLA_Apply_CAQ_UT_inc_internal( side, trans, direct, storev,
                                         R, RTW, WT, B, flash_apcaqutinc_cntl );


  // End the parallel region.
  FLASH_Queue_end();

  return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:34，代码来源:FLASH_Apply_CAQ_UT_inc.c

示例3: FLASH_Chol_solve

FLA_Error FLASH_Chol_solve( FLA_Uplo uplo, FLA_Obj A, FLA_Obj B, FLA_Obj X )
{
  // Check parameters.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Chol_solve_check( uplo, A, B, X );

  FLASH_Copy( B, X );

  if ( uplo == FLA_LOWER_TRIANGULAR )
  {
      FLASH_Trsm( FLA_LEFT, FLA_LOWER_TRIANGULAR, FLA_NO_TRANSPOSE,
                  FLA_NONUNIT_DIAG, FLA_ONE, A, X );
      FLASH_Trsm( FLA_LEFT, FLA_LOWER_TRIANGULAR, FLA_CONJ_TRANSPOSE,
                  FLA_NONUNIT_DIAG, FLA_ONE, A, X );
  }
  else // if ( uplo == FLA_UPPER_TRIANGULAR )
  {
      FLASH_Trsm( FLA_LEFT, FLA_UPPER_TRIANGULAR, FLA_CONJ_TRANSPOSE,
                  FLA_NONUNIT_DIAG, FLA_ONE, A, X );
      FLASH_Trsm( FLA_LEFT, FLA_UPPER_TRIANGULAR, FLA_NO_TRANSPOSE,
                  FLA_NONUNIT_DIAG, FLA_ONE, A, X );
  }

  return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:25，代码来源:FLASH_Chol_solve.c

示例4: FLA_LU_find_zero_on_diagonal

FLA_Error FLA_LU_find_zero_on_diagonal( FLA_Obj A )
{
  FLA_Obj ATL,   ATR,      A00,  a01,     A02, 
          ABL,   ABR,      a10t, alpha11, a12t,
                           A20,  a21,     A22;

  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_LU_find_zero_on_diagonal_check( A );

  FLA_Part_2x2( A,    &ATL, &ATR,
                      &ABL, &ABR,     0, 0, FLA_TL );

  while ( FLA_Obj_length( ATL ) < FLA_Obj_min_dim( A ) ){

    FLA_Repart_2x2_to_3x3( ATL, /**/ ATR,       &A00,  /**/ &a01,     &A02,
                        /* ************* */   /* ************************** */
                                                &a10t, /**/ &alpha11, &a12t,
                           ABL, /**/ ABR,       &A20,  /**/ &a21,     &A22,
                           1, 1, FLA_BR );

    /*------------------------------------------------------------*/

    if ( FLA_Obj_equals( alpha11, FLA_ZERO ) ) return FLA_Obj_length( A00 );

    /*------------------------------------------------------------*/

    FLA_Cont_with_3x3_to_2x2( &ATL, /**/ &ATR,       A00,  a01,     /**/ A02,
                                                     a10t, alpha11, /**/ a12t,
                            /* ************** */  /* ************************ */
                              &ABL, /**/ &ABR,       A20,  a21,     /**/ A22,
                              FLA_TL );
  }

  return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:35，代码来源:FLA_LU_find_zero_on_diagonal.c

示例5: FLA_Obj_create_complex_constant

FLA_Error FLA_Obj_create_complex_constant( double const_real, double const_imag, FLA_Obj *obj )
{
  int*      temp_i;
  float*    temp_s;
  double*   temp_d;
  scomplex* temp_c;
  dcomplex* temp_z;

  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Obj_create_complex_constant_check( const_real, const_imag, obj );

  FLA_Obj_create( FLA_CONSTANT, 1, 1, 0, 0, obj );

#ifdef FLA_ENABLE_SCC
  if ( !FLA_is_owner() )
    return FLA_SUCCESS;
#endif

  temp_i       = FLA_INT_PTR( *obj );
  temp_s       = FLA_FLOAT_PTR( *obj );
  temp_d       = FLA_DOUBLE_PTR( *obj );
  temp_c       = FLA_COMPLEX_PTR( *obj );
  temp_z       = FLA_DOUBLE_COMPLEX_PTR( *obj );

  *temp_i      = ( int   ) const_real;
  *temp_s      = ( float ) const_real;
  *temp_d      =           const_real;
  temp_c->real = ( float ) const_real;
  temp_c->imag = ( float ) const_imag;
  temp_z->real =           const_real;
  temp_z->imag =           const_imag;

  return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:34，代码来源:FLA_Obj.c

示例6: FLASH_CAQR_UT_inc_noopt

FLA_Error FLASH_CAQR_UT_inc_noopt( dim_t p, FLA_Obj A, FLA_Obj ATW, FLA_Obj R, FLA_Obj RTW )
{
  FLA_Error r_val = FLA_SUCCESS;
  dim_t     nb_part;

  // Check parameters.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_CAQR_UT_inc_check( p, A, ATW, R, RTW );

  // Compute the partition length from the number of partitions.
  nb_part = FLA_CAQR_UT_inc_compute_blocks_per_part( p, A );

  // Begin a parallel region.
  FLASH_Queue_begin();

  // Perform incremental QR's on each of the p partitions.
  FLA_CAQR_UT_inc_factorize_panels( nb_part, A, ATW );

  // Copy the triangles of A into R.
  FLA_CAQR_UT_inc_copy_triangles( nb_part, A, R );

  // Perform an incremental CAQR on the resulting upper triangular R's in A.
  FLA_CAQR_UT_inc_blk_var1( R, RTW, flash_caqrutinc_cntl );

  // End the parallel region.
  FLASH_Queue_end();

  return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:29，代码来源:FLASH_CAQR_UT_inc_noopt.c

示例7: FLASH_Random_spd_matrix

FLA_Error FLASH_Random_spd_matrix( FLA_Uplo uplo, FLA_Obj H )
{
	FLA_Obj   F;
	FLA_Error e_val;

	if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
	{
		e_val = FLA_Check_valid_uplo( uplo );
		FLA_Check_error_code( e_val );
	}

	// Exit early if one dimension is zero.
	if ( FLA_Obj_has_zero_dim( H ) ) return FLA_SUCCESS;

	// Create a temporary flat copy of the hierarchical object.
	FLASH_Obj_create_flat_copy_of_hier( H, &F );

	// Randomize the flat matrix object to be SPD.
	FLA_Random_spd_matrix( uplo, F );

	// Copy the flat object's contents back to the hierarchical object.
	FLASH_Obj_hierarchify( F, H );

	// Free the temporary flat object.
	FLASH_Obj_free( &F );

	return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:28，代码来源:FLASH_Random_spd_matrix.c

示例8: FLASH_QR_UT_inc_opt1

FLA_Error FLASH_QR_UT_inc_opt1( FLA_Obj A, FLA_Obj TW )
{
  FLA_Error r_val;
  FLA_Obj   U;

  // Check parameters.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_QR_UT_inc_check( A, TW );

  // Create a temporary matrix to hold copies of all of the blocks along the
  // diagonal of A.
  FLASH_Obj_create_diag_panel( A, &U );

  // Begin a parallel region.
  FLASH_Queue_begin();

  // Invoke FLA_QR_UT_inc_blk_var2() with the standard control tree.
  r_val = FLA_QR_UT_inc_blk_var2( A, TW, U, flash_qrutinc_cntl );

  // End the parallel region.
  FLASH_Queue_end();

  // Free the temporary matrix.
  FLASH_Obj_free( &U );

  return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:27，代码来源:FLASH_QR_UT_inc_opt1.c

示例9: FLA_Obj_elemtype

FLA_Elemtype FLA_Obj_elemtype( FLA_Obj obj )
{
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Obj_elemtype_check( obj );

  return obj.base->elemtype;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:7，代码来源:FLA_Query.c

示例10: FLA_Obj_datatype_size

dim_t FLA_Obj_datatype_size( FLA_Datatype datatype )
{
  dim_t datatype_size = 0;

  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Obj_datatype_size_check( datatype );

  switch( datatype )
  {
    case FLA_INT: 
      datatype_size = sizeof( int );
      break;
    case FLA_FLOAT: 
      datatype_size = sizeof( float );
      break;
    case FLA_DOUBLE: 
      datatype_size = sizeof( double );
      break;
    case FLA_COMPLEX: 
      datatype_size = sizeof( scomplex );
      break;
    case FLA_DOUBLE_COMPLEX: 
      datatype_size = sizeof( dcomplex );
      break;
    case FLA_CONSTANT: 
      datatype_size = FLA_CONSTANT_SIZE;
      break;
  }

  return datatype_size;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:31，代码来源:FLA_Query.c

示例11: FLA_Submatrix_at

void* FLA_Submatrix_at( FLA_Datatype datatype, void* buffer, dim_t i, dim_t j, dim_t rs, dim_t cs )
{
  void* r_val = buffer;

  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Submatrix_at_check( datatype, buffer, i, j, rs, cs );

  switch( datatype )
  {
    case FLA_INT:
      r_val = ( void* ) ( (      ( int* ) buffer ) + i * rs + j * cs );
      break;

    case FLA_FLOAT:
      r_val = ( void* ) ( (    ( float* ) buffer ) + i * rs + j * cs );
      break;

    case FLA_DOUBLE:
      r_val = ( void* ) ( (   ( double* ) buffer ) + i * rs + j * cs );
      break;

    case FLA_COMPLEX:
      r_val = ( void* ) ( ( ( scomplex* ) buffer ) + i * rs + j * cs );
      break;

    case FLA_DOUBLE_COMPLEX:
      r_val = ( void* ) ( ( ( dcomplex* ) buffer ) + i * rs + j * cs );
      break;
  }

  return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:32，代码来源:FLA_Query.c

示例12: FLA_QR_UT_solve

FLA_Error FLA_QR_UT_solve( FLA_Obj A, FLA_Obj T, FLA_Obj B, FLA_Obj X )
{
  FLA_Obj W, Y;
  FLA_Obj AT, AB;
  FLA_Obj YT, YB;

  // Check parameters.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_QR_UT_solve_check( A, T, B, X );

  FLA_Apply_Q_UT_create_workspace( T, B, &W );

  FLA_Obj_create_copy_of( FLA_NO_TRANSPOSE, B, &Y );

  FLA_Apply_Q_UT( FLA_LEFT, FLA_CONJ_TRANSPOSE, FLA_FORWARD, FLA_COLUMNWISE,
                  A, T, W, Y );

  FLA_Part_2x1( A,   &AT,
                     &AB,    FLA_Obj_width( A ), FLA_TOP );
  FLA_Part_2x1( Y,   &YT,
                     &YB,    FLA_Obj_width( A ), FLA_TOP );

  FLA_Trsm_external( FLA_LEFT, FLA_UPPER_TRIANGULAR, FLA_NO_TRANSPOSE,
                     FLA_NONUNIT_DIAG, FLA_ONE, AT, YT );

  FLA_Copy_external( YT, X );

  FLA_Obj_free( &Y );
  FLA_Obj_free( &W );

  return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:32，代码来源:FLA_QR_UT_solve.c

示例13: FLASH_LQ_UT_solve

FLA_Error FLASH_LQ_UT_solve( FLA_Obj A, FLA_Obj T, FLA_Obj B, FLA_Obj X )
{
    FLA_Obj W;
    FLA_Obj AL, AR;
    FLA_Obj XT, XB;

    // Check parameters.
    if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
        FLA_LQ_UT_solve_check( A, T, B, X );

    FLASH_Apply_Q_UT_create_workspace( T, X, &W );

    FLA_Part_1x2( A,   &AL, &AR,    FLA_Obj_length( A ), FLA_LEFT );
    FLA_Part_2x1( X,   &XT,
                  &XB,    FLA_Obj_length( B ), FLA_TOP );

    FLASH_Copy( B, XT );

    FLASH_Trsm( FLA_LEFT, FLA_LOWER_TRIANGULAR, FLA_NO_TRANSPOSE,
                FLA_NONUNIT_DIAG, FLA_ONE, AL, XT );

    FLASH_Set( FLA_ZERO, XB );

    FLASH_Apply_Q_UT( FLA_LEFT, FLA_NO_TRANSPOSE, FLA_FORWARD, FLA_ROWWISE,
                      A, T, W, X );

    FLASH_Obj_free( &W );

    return FLA_SUCCESS;
}

开发者ID:fmarrabal，项目名称:libflame，代码行数:30，代码来源:FLASH_LQ_UT_solve.c

示例14: FLA_LQ_UT_internal

FLA_Error FLA_LQ_UT_internal( FLA_Obj A, FLA_Obj T, fla_lqut_t* cntl )
{
	FLA_Error r_val = FLA_SUCCESS;
	
	if ( FLA_Check_error_level() == FLA_FULL_ERROR_CHECKING )
		FLA_LQ_UT_internal_check( A, T, cntl );

	if      ( FLA_Cntl_matrix_type( cntl ) == FLA_HIER &&
	          FLA_Cntl_variant( cntl ) == FLA_SUBPROBLEM )
	{
		if ( FLASH_Queue_get_enabled( ) )
		{
			// Enqueue
			ENQUEUE_FLASH_LQ_UT_macro( A, T, cntl );
		}
		else
		{
			// Execute
			r_val = FLA_LQ_UT_macro_task( A, T, cntl );
		}
	}
	else
	{
		if      ( FLA_Cntl_variant( cntl ) == FLA_UNBLOCKED_VARIANT1 )
		{
			r_val = FLA_LQ_UT_unb_var1( A, T );
		}
		else if ( FLA_Cntl_variant( cntl ) == FLA_UNB_OPT_VARIANT1 )
		{
			r_val = FLA_LQ_UT_opt_var1( A, T );
		}
		else if ( FLA_Cntl_variant( cntl ) == FLA_BLOCKED_VARIANT1 )
		{
			r_val = FLA_LQ_UT_blk_var1( A, T, cntl );
		}
		else if ( FLA_Cntl_variant( cntl ) == FLA_UNBLOCKED_VARIANT2 )
		{
			r_val = FLA_LQ_UT_unb_var2( A, T );
		}
		else if ( FLA_Cntl_variant( cntl ) == FLA_UNB_OPT_VARIANT2 )
		{
			r_val = FLA_LQ_UT_opt_var2( A, T );
		}
		else if ( FLA_Cntl_variant( cntl ) == FLA_BLOCKED_VARIANT2 )
		{
			r_val = FLA_LQ_UT_blk_var2( A, T, cntl );
		}
		else if ( FLA_Cntl_variant( cntl ) == FLA_BLOCKED_VARIANT3 )
		{
			r_val = FLA_LQ_UT_blk_var3( A, T, cntl );
		}
		else
		{
			FLA_Check_error_code( FLA_NOT_YET_IMPLEMENTED );
		}
	}

	return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:59，代码来源:FLA_LQ_UT_internal.c

示例15: FLA_LU_nopiv

FLA_Error FLA_LU_nopiv( FLA_Obj A )
{
  FLA_Error r_val;

  // Check parameters.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_LU_nopiv_check( A );

  // Invoke FLA_LU_nopiv_internal() with large control tree.
  r_val = FLA_LU_nopiv_internal( A, fla_lu_nopiv_cntl2 );

  // Check for singularity.
  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    r_val = FLA_LU_find_zero_on_diagonal( A );

  return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:17，代码来源:FLA_LU_nopiv.c

示例16: FLA_Norm_inf

FLA_Error FLA_Norm_inf( FLA_Obj A, FLA_Obj norm )
{
  FLA_Obj AT,              A0,
          AB,              a1t,
                           A2;

  FLA_Obj bT,              b0,
          bB,              beta1,
                           b2;
  FLA_Obj b;

  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Norm_inf_check( A, norm );

  FLA_Obj_create( FLA_Obj_datatype( A ), FLA_Obj_length( A ), 1, 0, 0, &b );

  FLA_Part_2x1( A,    &AT, 
                      &AB,            0, FLA_TOP );

  FLA_Part_2x1( b,    &bT, 
                      &bB,            0, FLA_TOP );

  while ( FLA_Obj_length( AT ) < FLA_Obj_length( A ) ){

    FLA_Repart_2x1_to_3x1( AT,                &A0, 
                        /* ** */            /* *** */
                                              &a1t, 
                           AB,                &A2,        1, FLA_BOTTOM );

    FLA_Repart_2x1_to_3x1( bT,                &b0, 
                        /* ** */            /* ***** */
                                              &beta1, 
                           bB,                &b2,        1, FLA_BOTTOM );

    /*------------------------------------------------------------*/

    FLA_Asum( a1t, beta1 );

    /*------------------------------------------------------------*/

    FLA_Cont_with_3x1_to_2x1( &AT,                A0, 
                                                  a1t, 
                            /* ** */           /* *** */
                              &AB,                A2,     FLA_TOP );

    FLA_Cont_with_3x1_to_2x1( &bT,                b0, 
                                                  beta1, 
                            /* ** */           /* ***** */
                              &bB,                b2,     FLA_TOP );

  }

  FLA_Max_abs_value( b, norm );

  FLA_Obj_free( &b );

  return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:58，代码来源:FLA_Norm_inf.c

示例17: FLA_Symm_internal

FLA_Error FLA_Symm_internal( FLA_Side side, FLA_Uplo uplo, FLA_Obj alpha, FLA_Obj A, FLA_Obj B, FLA_Obj beta, FLA_Obj C, fla_symm_t* cntl )
{
	FLA_Error r_val = FLA_SUCCESS;

	if ( FLA_Check_error_level() == FLA_FULL_ERROR_CHECKING )
		FLA_Symm_internal_check( side, uplo, alpha, A, B, beta, C, cntl );

	if      ( FLA_Cntl_matrix_type( cntl ) == FLA_HIER &&
	          FLA_Obj_elemtype( A ) == FLA_MATRIX &&
	          FLA_Cntl_variant( cntl ) == FLA_SUBPROBLEM )
	{
		// Recurse
		r_val = FLA_Symm_internal( side,
		                           uplo,
		                           alpha,
		                           *FLASH_OBJ_PTR_AT( A ),
		                           *FLASH_OBJ_PTR_AT( B ),
		                           beta,
		                           *FLASH_OBJ_PTR_AT( C ),
		                           flash_symm_cntl_mm );
	}
	else if ( FLA_Cntl_matrix_type( cntl ) == FLA_HIER &&
	          FLA_Obj_elemtype( A ) == FLA_SCALAR &&
	          FLASH_Queue_get_enabled( ) )
	{
		// Enqueue
		ENQUEUE_FLASH_Symm( side, uplo, alpha, A, B, beta, C, cntl );
	}
	else
	{
		if ( FLA_Cntl_matrix_type( cntl ) == FLA_HIER &&
		     FLA_Obj_elemtype( A ) == FLA_SCALAR &&
		     !FLASH_Queue_get_enabled( ) )
		{
			// Execute leaf
			cntl = flash_symm_cntl_blas;
		}

		// Parameter combinations
		if      ( side == FLA_LEFT )
		{
			if      ( uplo == FLA_LOWER_TRIANGULAR )
				r_val = FLA_Symm_ll( alpha, A, B, beta, C, cntl );
			else if ( uplo == FLA_UPPER_TRIANGULAR )
				r_val = FLA_Symm_lu( alpha, A, B, beta, C, cntl );
		}
		else if ( side == FLA_RIGHT )
		{
			if      ( uplo == FLA_LOWER_TRIANGULAR )
				r_val = FLA_Symm_rl( alpha, A, B, beta, C, cntl );
			else if ( uplo == FLA_UPPER_TRIANGULAR )
				r_val = FLA_Symm_ru( alpha, A, B, beta, C, cntl );
		}
	}

	return r_val;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:57，代码来源:FLA_Symm_internal.c

示例18: FLA_Obj_create_conf_to

FLA_Error FLA_Obj_create_conf_to( FLA_Trans trans, FLA_Obj obj_cur, FLA_Obj *obj_new )
{
  FLA_Datatype datatype;
  FLA_Elemtype elemtype;
  dim_t        m, n;
  dim_t        rs, cs;

  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Obj_create_conf_to_check( trans, obj_cur, obj_new );

  datatype = FLA_Obj_datatype( obj_cur );
  elemtype = FLA_Obj_elemtype( obj_cur );

  // Query the dimensions of the existing object.
  if ( trans == FLA_NO_TRANSPOSE || trans == FLA_CONJ_NO_TRANSPOSE )
  {
    m = FLA_Obj_length( obj_cur );
    n = FLA_Obj_width( obj_cur );
  }
  else // if ( trans == FLA_TRANSPOSE || trans == FLA_CONJ_TRANSPOSE )
  {
    m = FLA_Obj_width( obj_cur );
    n = FLA_Obj_length( obj_cur );
  }

  // Query the row and column strides of the existing object. We don't care
  // about the actual leading dimension of the existing object, only whether
  // it is in row- or column-major format.
  rs = FLA_Obj_row_stride( obj_cur );
  cs = FLA_Obj_col_stride( obj_cur );

  if ( ( rs == 1 && cs == 1 ) )
  {
    // Do nothing. This special case will be handled by FLA_adjust_strides().
    ;
  }
  else if ( rs == 1 )
  {
    // For column-major storage, use the m dimension as the column stride.
    // Row stride is already set to 1.
    cs = m;
  }
  else if ( cs == 1 )
  {
    // For row-major storage, use the n dimension as the row stride.
    // Column stride is already set to 1.
    rs = n;
  }

  // Handle empty views.
  if ( m == 0 ) cs = 1;
  if ( n == 0 ) rs = 1;

  FLA_Obj_create_ext( datatype, elemtype, m, n, m, n, rs, cs, obj_new );

  return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:57，代码来源:FLA_Obj.c

示例19: FLA_Absolute_value

FLA_Error FLA_Absolute_value( FLA_Obj alpha )
{
  FLA_Datatype datatype;

  if ( FLA_Check_error_level() >= FLA_MIN_ERROR_CHECKING )
    FLA_Absolute_value_check( alpha );

  datatype = FLA_Obj_datatype( alpha );
  
  switch ( datatype ){

  case FLA_FLOAT:
  {
    float *buff_alpha = ( float * ) FLA_FLOAT_PTR( alpha );

    *buff_alpha = ( float ) fabs( ( double ) *buff_alpha );

    break;
  }

  case FLA_DOUBLE:
  {
    double *buff_alpha = ( double * ) FLA_DOUBLE_PTR( alpha );

    *buff_alpha = fabs( *buff_alpha );

    break;
  }

  case FLA_COMPLEX:
  {
    scomplex *buff_alpha = ( scomplex * ) FLA_COMPLEX_PTR( alpha );

    buff_alpha->real = ( float ) sqrt( ( double ) buff_alpha->real * buff_alpha->real + 
                                                  buff_alpha->imag * buff_alpha->imag );
    buff_alpha->imag = 0.0F; 


    break;
  }

  case FLA_DOUBLE_COMPLEX:
  {
    dcomplex *buff_alpha = ( dcomplex * ) FLA_DOUBLE_COMPLEX_PTR( alpha );

    buff_alpha->real = sqrt( buff_alpha->real * buff_alpha->real + 
                             buff_alpha->imag * buff_alpha->imag );
    buff_alpha->imag = 0.0; 

    break;
  }

  }

  return FLA_SUCCESS;
}

开发者ID:anaptyxis，项目名称:libflame，代码行数:56，代码来源:FLA_Absolute_value.c

示例20: FLA_Copyt_internal

FLA_Error FLA_Copyt_internal( FLA_Trans trans, FLA_Obj A, FLA_Obj B, fla_copyt_t* cntl )
{
	FLA_Error r_val = FLA_SUCCESS;

	if ( FLA_Check_error_level() == FLA_FULL_ERROR_CHECKING )
		FLA_Copyt_internal_check( trans, A, B, cntl );

	if      ( FLA_Cntl_matrix_type( cntl ) == FLA_HIER &&
	          FLA_Obj_elemtype( A ) == FLA_MATRIX &&
	          FLA_Cntl_variant( cntl ) == FLA_SUBPROBLEM )
	{
		// Recurse
		r_val = FLA_Copyt_internal( trans,
		                            *FLASH_OBJ_PTR_AT( A ),
		                            *FLASH_OBJ_PTR_AT( B ),
		                            flash_copyt_cntl );
	}
	else if ( FLA_Cntl_matrix_type( cntl ) == FLA_HIER &&
	          FLA_Obj_elemtype( A ) == FLA_SCALAR &&
	          FLASH_Queue_get_enabled( ) )
	{
		// Enqueue
		ENQUEUE_FLASH_Copyt( trans, A, B, cntl );
	}
	else
	{
		if ( FLA_Cntl_matrix_type( cntl ) == FLA_HIER &&
		     FLA_Obj_elemtype( A ) == FLA_SCALAR &&
		     !FLASH_Queue_get_enabled( ) )
		{
			// Execute leaf
			cntl = flash_copyt_cntl_blas;
		}
		
		// Parameter combinations
		if      ( trans == FLA_NO_TRANSPOSE )
		{
			r_val = FLA_Copyt_n( A, B, cntl );
		}
		else if ( trans == FLA_TRANSPOSE )
		{
			r_val = FLA_Copyt_t( A, B, cntl );
		}
		else if ( trans == FLA_CONJ_NO_TRANSPOSE )
		{
			r_val = FLA_Copyt_c( A, B, cntl );
		}
		else if ( trans == FLA_CONJ_TRANSPOSE )
		{
			r_val = FLA_Copyt_h( A, B, cntl );
		}
	}

	return r_val;
}

开发者ID:pgawron，项目名称:tlash，代码行数:55，代码来源:FLA_Copyt_internal.c

注：本文中的FLA_Check_error_level函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FLA_Clock函数代码示例发布时间：2022-05-30

C++ FLA_Check_error_code函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19166|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8321|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ FLA_Check_error_level函数代码示例

示例1: FLASH_LU_piv

示例2: FLASH_Apply_CAQ_UT_inc

示例3: FLASH_Chol_solve

示例4: FLA_LU_find_zero_on_diagonal

示例5: FLA_Obj_create_complex_constant

示例6: FLASH_CAQR_UT_inc_noopt

示例7: FLASH_Random_spd_matrix

示例8: FLASH_QR_UT_inc_opt1

示例9: FLA_Obj_elemtype

示例10: FLA_Obj_datatype_size

示例11: FLA_Submatrix_at

示例12: FLA_QR_UT_solve

示例13: FLASH_LQ_UT_solve

示例14: FLA_LQ_UT_internal

示例15: FLA_LU_nopiv

示例16: FLA_Norm_inf

示例17: FLA_Symm_internal

示例18: FLA_Obj_create_conf_to

示例19: FLA_Absolute_value

示例20: FLA_Copyt_internal

请发表评论

全部评论

上一篇：

下一篇：

Ubuntu14.04下安装matlab2014a

bradtraversy/iweather: Ionic 3 mobile we

CVE-2020-27732

joaomh/curso-de-matlab

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053