C++ Error_Set函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Error_Set函数的典型用法代码示例。如果您正苦于以下问题：C++ Error_Set函数的具体用法？C++ Error_Set怎么用？C++ Error_Set使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Error_Set函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Error_Set

bool Cdodproperror::SaveGridsAsTIFF(CSG_Grid** grids, CSG_Strings paths)
{
	TSG_Data_Type Type;
	CSG_String FilePath;
	CSG_Grid* Grid;

	// SAVE TIFFS
	for (int i = 0; i < paths.Get_Count(); i++)
	{
		 FilePath = paths[i];
		 Grid = grids[i];
		 Type = Grid->Get_Type();

		if( !GDALDataSet.Open_Write(FilePath, GDALDriver, GDALOptions, Type, 1, *Get_System(), Projection) )
		{
			Error_Set(CSG_String::Format(SG_T("%s: '%s' "), _TL("Failed to open file for writing: "), FilePath.c_str()));
			return( false );
		}
		GDALDataSet.Write(0, Grid);
		if( !GDALDataSet.Close() )
		{
			Error_Set(CSG_String::Format(SG_T("%s: '%s' "), _TL("Failed to close file after writing: "), FilePath.c_str()));
			return( false );
		}
	}

	return true;
}

开发者ID:sina-masoud-ansari，项目名称:saga-gis，代码行数:28，代码来源:dodproperror.cpp

示例2: Parameters

//---------------------------------------------------------
bool CPolygon_Geometrics::On_Execute(void)
{
	//-------------------------------------------------
	int	bParts	= Parameters("BPARTS")	->asBool() ? 0 : -1;
	int	bPoints	= Parameters("BPOINTS")	->asBool() ? 0 : -1;
	int	bLength	= Parameters("BLENGTH")	->asBool() ? 0 : -1;
	int	bArea	= Parameters("BAREA")	->asBool() ? 0 : -1;

	if( bParts && bPoints && bLength && bArea )
	{
		Error_Set(_TL("no properties selected"));

		return( false );
	}

	//-------------------------------------------------
	CSG_Shapes	*pPolygons	= Parameters("POLYGONS")->asShapes();

	if(	!pPolygons->is_Valid() || pPolygons->Get_Count() <= 0 )
	{
		Error_Set(_TL("invalid lines layer"));

		return( false );
	}

	if( Parameters("OUTPUT")->asShapes() && Parameters("OUTPUT")->asShapes() != pPolygons )
	{
		pPolygons	= Parameters("OUTPUT")->asShapes();
		pPolygons->Create(*Parameters("POLYGONS")->asShapes());
	}

	//-------------------------------------------------
	if( !bParts )	{	bParts	= pPolygons->Get_Field_Count();	pPolygons->Add_Field(SG_T("NPARTS")   , SG_DATATYPE_Int   );	}
	if( !bPoints )	{	bPoints	= pPolygons->Get_Field_Count();	pPolygons->Add_Field(SG_T("NPOINTS")  , SG_DATATYPE_Int   );	}
	if( !bLength )	{	bLength	= pPolygons->Get_Field_Count();	pPolygons->Add_Field(SG_T("PERIMETER"), SG_DATATYPE_Double);	}
	if( !bArea )	{	bArea	= pPolygons->Get_Field_Count();	pPolygons->Add_Field(SG_T("AREA")     , SG_DATATYPE_Double);	}

	//-------------------------------------------------
	for(int i=0; i<pPolygons->Get_Count() && Set_Progress(i, pPolygons->Get_Count()); i++)
	{
		CSG_Shape	*pPolygon	= pPolygons->Get_Shape(i);

		if( bParts  >= 0 )	pPolygon->Set_Value(bParts , pPolygon->Get_Part_Count());
		if( bPoints >= 0 )	pPolygon->Set_Value(bPoints, pPolygon->Get_Point_Count());
		if( bLength >= 0 )	pPolygon->Set_Value(bLength, ((CSG_Shape_Polygon *)pPolygon)->Get_Perimeter());
		if( bArea   >= 0 )	pPolygon->Set_Value(bArea  , ((CSG_Shape_Polygon *)pPolygon)->Get_Area());
	}

	//-------------------------------------------------
	if( pPolygons == Parameters("POLYGONS")->asShapes() )
	{
		DataObject_Update(pPolygons);
	}

	return( true );
}

开发者ID:johanvdw，项目名称:saga-debian，代码行数:57，代码来源:Polygon_Geometrics.cpp

示例3: Parameters

//---------------------------------------------------------
bool CLine_Properties::On_Execute(void)
{
	//-------------------------------------------------
	int	bParts	= Parameters("BPARTS")	->asBool() ? 0 : -1;
	int	bPoints	= Parameters("BPOINTS")	->asBool() ? 0 : -1;
	int	bLength	= Parameters("BLENGTH")	->asBool() ? 0 : -1;

	if( bParts && bPoints && bLength )
	{
		Error_Set(_TL("no properties selected"));

		return( false );
	}

	//-------------------------------------------------
	CSG_Shapes	*pLines	= Parameters("LINES")->asShapes();

	if(	!pLines->is_Valid() || pLines->Get_Count() <= 0 )
	{
		Error_Set(_TL("invalid lines layer"));

		return( false );
	}

	if( Parameters("OUTPUT")->asShapes() && Parameters("OUTPUT")->asShapes() != pLines )
	{
		pLines	= Parameters("OUTPUT")->asShapes();
		pLines->Create(*Parameters("LINES")->asShapes());
	}

	//-------------------------------------------------
	if( !bParts )	{	bParts	= pLines->Get_Field_Count();	pLines->Add_Field(SG_T("NPARTS") , SG_DATATYPE_Int   );	}
	if( !bPoints )	{	bPoints	= pLines->Get_Field_Count();	pLines->Add_Field(SG_T("NPOINTS"), SG_DATATYPE_Int   );	}
	if( !bLength )	{	bLength	= pLines->Get_Field_Count();	pLines->Add_Field(SG_T("LENGTH") , SG_DATATYPE_Double);	}

	//-------------------------------------------------
	for(int i=0; i<pLines->Get_Count() && Set_Progress(i, pLines->Get_Count()); i++)
	{
		CSG_Shape	*pLine	= pLines->Get_Shape(i);

		if( bParts  >= 0 )	pLine->Set_Value(bParts , pLine->Get_Part_Count());
		if( bPoints >= 0 )	pLine->Set_Value(bPoints, pLine->Get_Point_Count());
		if( bLength >= 0 )	pLine->Set_Value(bLength, ((CSG_Shape_Line *)pLine)->Get_Length());
	}

	//-------------------------------------------------
	if( pLines == Parameters("LINES")->asShapes() )
	{
		DataObject_Update(pLines);
	}

	return( true );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:54，代码来源:line_properties.cpp

示例4: Parameters

//---------------------------------------------------------
bool COGR_Export_KML::On_Execute(void)
{
	CSG_Shapes	Shapes, *pShapes	= Parameters("SHAPES")->asShapes();

	//-----------------------------------------------------
	if( pShapes->Get_Projection().Get_Type() == SG_PROJ_TYPE_CS_Undefined )
	{
		Message_Add(_TL("layer uses undefined coordinate system, assuming geographic coordinates"));
	}
	else if( pShapes->Get_Projection().Get_Type() != SG_PROJ_TYPE_CS_Geographic )
	{
		Message_Fmt("\n%s (%s: %s)\n", _TL("re-projection to geographic coordinates"), _TL("original"), pShapes->Get_Projection().Get_Name().c_str());

		bool	bResult;

		SG_RUN_TOOL(bResult, "pj_proj4", 2,
				SG_TOOL_PARAMETER_SET("SOURCE"   , pShapes)
			&&	SG_TOOL_PARAMETER_SET("TARGET"   , &Shapes)
			&&	SG_TOOL_PARAMETER_SET("CRS_PROJ4", SG_T("+proj=longlat +ellps=WGS84 +datum=WGS84"))
		);

		if( bResult )
		{
			pShapes	= &Shapes;

			Message_Fmt("\n%s: %s\n", _TL("re-projection"), _TL("success"));
		}
		else
		{
			Message_Fmt("\n%s: %s\n", _TL("re-projection"), _TL("failed" ));
		}
	}

	//-----------------------------------------------------
	CSG_OGR_DataSet	DataSource;

	if( !DataSource.Create(Parameters("FILE")->asString(), "KML") )
	{
		Error_Set(_TL("KML file creation failed"));

		return( false );
	}

	if( !DataSource.Write(pShapes) )
	{
		Error_Set(_TL("failed to store data"));

		return( false );
	}

	return( true );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:53，代码来源:ogr_export_kml.cpp

示例5: Parameters

//---------------------------------------------------------
bool CFilter_Resample::On_Execute(void)
{
	double		Cellsize;
	CSG_Grid	*pGrid, *pLoPass, *pHiPass;

	//-----------------------------------------------------
	pGrid		= Parameters("GRID"  )->asGrid();
	pLoPass		= Parameters("LOPASS")->asGrid();
	pHiPass		= Parameters("HIPASS")->asGrid();
	Cellsize	= Parameters("SCALE" )->asDouble() * Get_Cellsize();

	//-----------------------------------------------------
	if( Cellsize > 0.5 * SG_Get_Length(Get_System()->Get_XRange(), Get_System()->Get_YRange()) )
	{
		Error_Set(_TL("resampling cell size is too large"));

		return( false );
	}

	//-----------------------------------------------------
	CSG_Grid	Grid(CSG_Grid_System(Cellsize, Get_XMin(), Get_YMin(), Get_XMax(), Get_YMax()), SG_DATATYPE_Float);

	Grid.Assign(pGrid, GRID_RESAMPLING_Mean_Cells);

	//-----------------------------------------------------
	pLoPass->Set_Name(CSG_String::Format(SG_T("%s [%s]"), pGrid->Get_Name(), _TL("Low Pass")));
	pHiPass->Set_Name(CSG_String::Format(SG_T("%s [%s]"), pGrid->Get_Name(), _TL("High Pass")));

	CSG_Colors	Colors;

	DataObject_Get_Colors(pGrid  , Colors);
	DataObject_Set_Colors(pLoPass, Colors);
	DataObject_Set_Colors(pHiPass, 11, SG_COLORS_RED_GREY_BLUE);

	//-----------------------------------------------------
	for(int y=0; y<Get_NY() && Set_Progress(y); y++)
	{
		double	py	= Get_YMin() + y * Get_Cellsize();

		#pragma omp parallel for
		for(int x=0; x<Get_NX(); x++)
		{
			double	z, px	= Get_XMin() + x * Get_Cellsize();

			if( !pGrid->is_NoData(x, y) && Grid.Get_Value(px, py, z) )
			{
				pLoPass->Set_Value(x, y, z);
				pHiPass->Set_Value(x, y, pGrid->asDouble(x, y) - z);
			}
			else
			{
				pLoPass->Set_NoData(x, y);
				pHiPass->Set_NoData(x, y);
			}
		}
	}

	//-----------------------------------------------------
	return( true );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:61，代码来源:Filter_Resample.cpp

示例6: Parameters

//---------------------------------------------------------
bool CGeoref_Grid::On_Execute(void)
{
	CSG_Shapes	*pShapes_A	= Parameters("REF_SOURCE")->asShapes();
	CSG_Shapes	*pShapes_B	= Parameters("REF_TARGET")->asShapes();

	int	xField	= Parameters("XFIELD")->asInt();
	int	yField	= Parameters("YFIELD")->asInt();

	//-----------------------------------------------------
	if( ( pShapes_B && m_Engine.Set_Reference(pShapes_A, pShapes_B))
	||	(!pShapes_B && m_Engine.Set_Reference(pShapes_A, xField, yField))	)
	{
		int	Method	= Parameters("METHOD")->asInt();
		int	Order	= Parameters("ORDER" )->asInt();

		if( m_Engine.Evaluate(Method, Order) && Get_Conversion() )
		{
			m_Engine.Destroy();

			return( true );
		}
	}

	//-----------------------------------------------------
	if( !m_Engine.Get_Error().is_Empty() )
	{
		Error_Set(m_Engine.Get_Error());
	}

	m_Engine.Destroy();

	return( false );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:34，代码来源:Georef_Grid.cpp

示例7: Parameters

//---------------------------------------------------------
bool CCost_Accumulated::On_Execute(void)
{
	//-----------------------------------------------------
	m_pCost			= Parameters("COST"       )->asGrid();
	m_pAccumulated	= Parameters("ACCUMULATED")->asGrid();
	m_pAllocation	= Parameters("ALLOCATION" )->asGrid();
	m_pDirection	= Parameters("DIR_MAXCOST")->asGrid();
	m_bDegree		= Parameters("DIR_UNIT"   )->asInt() == 1;
	m_dK			= Parameters("DIR_K"      )->asDouble();

	//-----------------------------------------------------
	CPoints	Points;

	if( !Get_Destinations(Points) )
	{
		Error_Set(_TL("no destination points in grid area."));

		return( false );
	}

	//-----------------------------------------------------
	Get_Cost(Points);

	Get_Allocation();

	//-----------------------------------------------------
	return( true );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:29，代码来源:Cost_Isotropic.cpp

示例8: On_Execute

//---------------------------------------------------------
bool CShapes_SRID_Update::On_Execute(void)
{
	if( !Get_Connection()->has_PostGIS() )	{	Error_Set(_TL("no PostGIS layer"));	return( false );	}

	//-----------------------------------------------------
	CSG_String	Select;
	CSG_Table	Table;

	Select.Printf(SG_T("f_table_name='%s'"), Parameters("TABLES")->asString());

	if( !Get_Connection()->Table_Load(Table, "geometry_columns", "*", Select) || Table.Get_Count() != 1 )
	{
		return( false );
	}

	Select.Printf(SG_T("SELECT UpdateGeometrySRID('%s', '%s', %d)"),
		Parameters("TABLES")->asString(),
		Table[0].asString("f_geometry_column"),
		Get_SRID()
	);

	//-----------------------------------------------------
	if( !Get_Connection()->Execute(Select) )
	{
		return( false );
	}

	return( true );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:30，代码来源:pgis_shapes.cpp

示例9: Error_Set

//---------------------------------------------------------
bool CXYZ_Import::On_Execute(void)
{
	CSG_File	Stream;

	if( !Stream.Open(Parameters("FILENAME")->asString(), SG_FILE_R) )
	{
		Error_Set(_TL("file could not be opened"));

		return( false );
	}

	//-----------------------------------------------------
	CSG_Shapes	*pPoints	= Parameters("POINTS")->asShapes();

	pPoints->Create(SHAPE_TYPE_Point, SG_File_Get_Name(Parameters("FILENAME")->asString(), false));

	pPoints->Add_Field("Z", SG_DATATYPE_Double);

	//-----------------------------------------------------
	if( Parameters("HEADLINE")->asBool() )
	{
		CSG_String	sLine;

		if( !Stream.Read_Line(sLine) )
		{
			Error_Set(_TL("could not read headline"));

			return( false );
		}
	}

	//-----------------------------------------------------
	sLong	Length	= Stream.Length();

	double	x, y, z;

	while( Stream.Scan(x) && Stream.Scan(y) && Stream.Scan(z) && Set_Progress((double)Stream.Tell(), (double)Length) )
	{
		CSG_Shape	*pPoint	= pPoints->Add_Shape();

		pPoint->Add_Point(x, y);

		pPoint->Set_Value(0, z);
	}

	return( pPoints->Get_Count() > 0 );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:48，代码来源:xyz.cpp

示例10: Parameters

//---------------------------------------------------------
bool CLines_From_Polygons::On_Execute(void)
{
	CSG_Shapes	*pLines, *pPolygons;

	pPolygons	= Parameters("POLYGONS")	->asShapes();
	pLines		= Parameters("LINES")		->asShapes();

	//-----------------------------------------------------
	if(	pPolygons->Get_Count() <= 0 )
	{
		Error_Set(_TL("no polygons in input"));

		return( false );
	}

	//-----------------------------------------------------
	pLines->Create(SHAPE_TYPE_Line, pPolygons->Get_Name(), pPolygons, pPolygons->Get_Vertex_Type());

	for(int iPolygon=0; iPolygon<pPolygons->Get_Count(); iPolygon++)
	{
		CSG_Shape	*pPolygon	= pPolygons	->Get_Shape(iPolygon);
		CSG_Shape	*pLine		= pLines	->Add_Shape(pPolygon, SHAPE_COPY_ATTR);

		for(int iPart=0; iPart<pPolygon->Get_Part_Count(); iPart++)
		{
			for(int iPoint=0; iPoint<pPolygon->Get_Point_Count(iPart); iPoint++)
			{
				pLine->Add_Point(pPolygon->Get_Point(iPoint, iPart), iPart);

				if( pPolygons->Get_Vertex_Type() != SG_VERTEX_TYPE_XY )
				{
					pLine->Set_Z(pPolygon->Get_Z(iPoint, iPart), iPoint, iPart);

					if( pPolygons->Get_Vertex_Type() == SG_VERTEX_TYPE_XYZM )
					{
						pLine->Set_M(pPolygon->Get_M(iPoint, iPart), iPoint, iPart);
					}
				}
			}

			if( !CSG_Point(pPolygon->Get_Point(0, iPart)).is_Equal(pPolygon->Get_Point(pPolygon->Get_Point_Count(iPart) - 1, iPart)) )
			{
				pLine->Add_Point(pPolygon->Get_Point(0, iPart), iPart);

				if( pPolygons->Get_Vertex_Type() != SG_VERTEX_TYPE_XY )
				{
					pLine->Set_Z(pPolygon->Get_Z(0, iPart), pLine->Get_Point_Count(iPart) - 1, iPart);

					if( pPolygons->Get_Vertex_Type() == SG_VERTEX_TYPE_XYZM )
					{
						pLine->Set_M(pPolygon->Get_M(0, iPart), pLine->Get_Point_Count(iPart) - 1, iPart);
					}
				}
			}
		}
	}

	return( true );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:60，代码来源:Lines_From_Polygons.cpp

示例11: Error_Set

static const char *Heap_testSuite()
{
    Error_Set(S_OK);
    mu_run_test(Heap_Construct_test);
    mu_run_test(Heap_Alloc_test);
    mu_run_test(Heap_Alloc_test_NoHeap);
    return NULL;
}

开发者ID:obiwanjacobi，项目名称:Zalt，代码行数:8，代码来源:HeapTests.c

示例12: Parameters

//---------------------------------------------------------
bool CTable_PCA::On_Execute(void)
{
    CSG_Vector	Eigen_Values;
    CSG_Matrix	Eigen_Vectors, Matrix;

    //-----------------------------------------------------
    m_pTable	= Parameters("TABLE")	->asTable();
    m_Method	= Parameters("METHOD")	->asInt();

    //-----------------------------------------------------
    if( !Get_Fields() )
    {
        Error_Set(_TL("invalid field selection"));

        SG_FREE_SAFE(m_Features);

        return( false );
    }

    if( !Get_Matrix(Matrix) )
    {
        Error_Set(_TL("matrix initialisation failed"));

        SG_FREE_SAFE(m_Features);

        return( false );
    }

    if( !SG_Matrix_Eigen_Reduction(Matrix, Eigen_Vectors, Eigen_Values) )
    {
        Error_Set(_TL("Eigen reduction failed"));

        SG_FREE_SAFE(m_Features);

        return( false );
    }

    //-----------------------------------------------------
    Get_Components(Eigen_Vectors, Eigen_Values);

    //-----------------------------------------------------
    SG_FREE_SAFE(m_Features);

    return( true );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:46，代码来源:table_pca.cpp

示例13: Parameters

//---------------------------------------------------------
bool CGrids_Product::On_Execute(void)
{
	//-----------------------------------------------------
	CSG_Parameter_Grid_List	*pGrids	= Parameters("GRIDS" )->asGridList();

	if( pGrids->Get_Count() < 1 )
	{
		Error_Set(_TL("no grid in list"));

		return( false );
	}

	//-----------------------------------------------------
	CSG_Grid	*pResult	= Parameters("RESULT")->asGrid();

	bool	bNoData	= Parameters("NODATA")->asBool();

	//-----------------------------------------------------
	for(int y=0; y<Get_NY() && Set_Progress(y); y++)
	{
		#pragma omp parallel for
		for(int x=0; x<Get_NX(); x++)
		{
			int		n	= 0;
			double	d	= 0.0;

			for(int i=0; i<pGrids->Get_Count(); i++)
			{
				if( pGrids->asGrid(i)->is_InGrid(x, y) )
				{
					if( n++ < 1 )
					{
						d 	 = pGrids->asGrid(i)->asDouble(x, y);
					}
					else
					{
						d	*= pGrids->asGrid(i)->asDouble(x, y);
					}
				}
			}

			if( bNoData ? n > 0 : n == pGrids->Get_Count() )
			{
				pResult->Set_Value(x, y, d);
			}
			else
			{
				pResult->Set_NoData(x, y);
			}
		}
	}

	//-----------------------------------------------------
	return( true );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:56，代码来源:grid_difference.cpp

示例14: Error_Set

//---------------------------------------------------------
bool CGrid_Classify_Supervised::On_Execute(void)
{
	//-----------------------------------------------------
	if( !Get_Features() )
	{
		Error_Set(_TL("invalid features"));

		return( false );
	}

	//-----------------------------------------------------
	CSG_Classifier_Supervised	Classifier;

	if( !Set_Classifier(Classifier) )
	{
		return( false );
	}

	//-----------------------------------------------------
	CSG_Grid	*pClasses	= Parameters("CLASSES")->asGrid();
	CSG_Grid	*pQuality	= Parameters("QUALITY")->asGrid();

	pClasses->Set_NoData_Value(0);
	pClasses->Assign(0.0);

	//-----------------------------------------------------
	Process_Set_Text(_TL("prediction"));

	int	Method	= Parameters("METHOD")->asInt();

	for(int y=0; y<Get_NY() && Set_Progress(y); y++)
	{
		#pragma omp parallel for
		for(int x=0; x<Get_NX(); x++)
		{
			int			Class;
			double		Quality;
			CSG_Vector	Features(m_pFeatures->Get_Count());

			if( Get_Features(x, y, Features) && Classifier.Get_Class(Features, Class, Quality, Method) )
			{
				SG_GRID_PTR_SAFE_SET_VALUE(pClasses, x, y, 1 + Class);
				SG_GRID_PTR_SAFE_SET_VALUE(pQuality, x, y, Quality  );
			}
			else
			{
				SG_GRID_PTR_SAFE_SET_NODATA(pClasses, x, y);
				SG_GRID_PTR_SAFE_SET_NODATA(pQuality, x, y);
			}
		}
	}

	//-----------------------------------------------------
	return( Set_Classification(Classifier) );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:56，代码来源:classify_supervised.cpp

示例15: Parameters

//---------------------------------------------------------
bool CSelect_Points::On_Execute(void)
{
	//-----------------------------------------------------
	m_pPoints		= Parameters("POINTS")		->asShapes();
	m_pSelection	= Parameters("SELECTION")	->asShapes();
	m_Radius		= Parameters("RADIUS")		->asDouble();
	m_MaxPoints		= Parameters("MAXNUM")		->asInt();
	m_Quadrant		= Parameters("QUADRANT")	->asInt() - 1;
	m_bAddCenter	= Parameters("ADDCENTER")	->asBool();

	//-----------------------------------------------------
	if( !m_pPoints->is_Valid() )
	{
		Error_Set(_TL("invalid points layer"));

		return( false );
	}

	if( m_pPoints->Get_Count() <= 0 )
	{
		Error_Set(_TL("no points in layer"));

		return( false );
	}

	if( !m_Search.Create(m_pPoints, -1) )
	{
		Error_Set(_TL("failed to initialise search engine"));

		return( false );
	}

	//-----------------------------------------------------
	m_pSelection->Create(SHAPE_TYPE_Point, CSG_String::Format(SG_T("%s [%s]"), m_pPoints->Get_Name(), _TL("Selection")), m_pPoints);

	m_pSelection->Add_Field(_TL("Order")	, SG_DATATYPE_Int);
	m_pSelection->Add_Field(_TL("Distance")	, SG_DATATYPE_Double);

	//-----------------------------------------------------
	return( true );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:42，代码来源:select_points.cpp

示例16: Parameters

//---------------------------------------------------------
bool CFlow_by_Slope::On_Execute(void)
{
	m_Slope_Min	= Parameters("SLOPE_MIN")->asDouble() * M_DEG_TO_RAD;
	m_Slope_Max = Parameters("SLOPE_MAX")->asDouble() * M_DEG_TO_RAD;

	if( m_Slope_Max <= 0.0 )
	{
		Error_Set(_TL("slope threshold must not be zero!"));

		return( false );
	}

	if( Parameters("B_FLOW")->asBool() )
	{
		m_Flow_Min	= Parameters("T_FLOW")->asRange()->Get_LoVal() * Get_Cellarea();
		m_Flow_Max	= Parameters("T_FLOW")->asRange()->Get_HiVal() * Get_Cellarea();
	}
	else
	{
		m_Flow_Min	= m_Flow_Max	= 0.0;
	}

	//-----------------------------------------------------
	m_pDEM		= Parameters("DEM"   )->asGrid();
	m_pFlow		= Parameters("FLOW"  )->asGrid();

	m_pFlow->Assign(Get_Cellarea());

	if( Parameters("WEIGHT")->asGrid() )
	{
		m_pFlow->Multiply(*Parameters("WEIGHT")->asGrid());
	}

	DataObject_Set_Colors(m_pFlow, 11, SG_COLORS_WHITE_BLUE, false);

	//-----------------------------------------------------
	for(sLong i=0; i<Get_NCells() && Set_Progress_NCells(i); i++)
	{
		int	x, y;

		if( !m_pDEM->Get_Sorted(i, x, y, true) || m_pDEM->is_NoData(x, y) )
		{
			m_pFlow->Set_NoData(x, y);
		}
		else
		{
			Set_Area(x, y);
		}
	}

	//-----------------------------------------------------
	return( true );
}

开发者ID:johanvdw，项目名称:saga-debian，代码行数:54，代码来源:flow_by_slope.cpp

示例17: Error_Set

//---------------------------------------------------------
bool CLife::On_Execute(void)
{
	//-----------------------------------------------------
	m_pLife	= m_Grid_Target.Get_Grid("LIFE", SG_DATATYPE_Byte);

	if( !m_pLife )
	{
		Error_Set(_TL("could not create target grid"));

		return( false );
	}

	//-----------------------------------------------------
	m_nColors	= Parameters("FADECOLOR")->asInt();

	for(int y=0; y<m_pLife->Get_NY(); y++)
	{
		for(int x=0; x<m_pLife->Get_NX(); x++)
		{
			m_pLife->Set_Value(x, y, CSG_Random::Get_Uniform(0, 100) < 50 ? 0 : m_nColors);
		}
	}

	//-----------------------------------------------------
	m_pLife->Set_Name(_TL("Conway's Game of Life"));
	m_pLife->Set_NoData_Value(-1);

	DataObject_Add       (m_pLife);
	DataObject_Set_Colors(m_pLife, 11, SG_COLORS_WHITE_BLUE);
	DataObject_Update    (m_pLife, 0, m_nColors, SG_UI_DATAOBJECT_SHOW);

	//-----------------------------------------------------
	int		i;

	m_Count.Create(m_pLife->Get_System(), SG_DATATYPE_Byte);

	for(i=1; Process_Get_Okay(true) && Next_Cycle(i > m_nColors); i++)
	{
		Process_Set_Text(CSG_String::Format("%s: %d", _TL("Life Cycle"), i));

		DataObject_Update(m_pLife, 0, m_nColors);
	}

	m_Count.Destroy();

	//-----------------------------------------------------
	if( is_Progress() )
	{
		Message_Add(CSG_String::Format("\n%s %d %s\n", _TL("Dead after"), i, _TL("Life Cycles")), false);
	}

	return( true );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:54，代码来源:Life.cpp

示例18: Parameters

//---------------------------------------------------------
bool CMelton_Ruggedness::On_Execute(void)
{
	CSG_Grid	*pDEM, *pArea, *pMRN, *pZMax;

	//-----------------------------------------------------
	pDEM		= Parameters("DEM" )->asGrid();
	pArea		= Parameters("AREA")->asGrid();
	pZMax		= Parameters("ZMAX")->asGrid();
	pMRN		= Parameters("MRN" )->asGrid();

	if( !pDEM->Set_Index() )
	{
		Error_Set(_TL("index creation failed"));

		return( false );
	}

	pArea->Set_NoData_Value(0.0);
	pArea->Assign_NoData();
	pZMax->Assign_NoData();
	pMRN ->Assign_NoData();

	//-------------------------------------------------
	for(sLong n=0; n<Get_NCells() && Set_Progress_NCells(n); n++)
	{
		int		x, y, i, ix, iy;

		if( pDEM->Get_Sorted(n, x, y, true, true) )
		{
			pArea->Add_Value(x, y, Get_Cellsize());

			if( pZMax->is_NoData(x, y) )
			{
				pZMax->Set_Value(x, y, pDEM->asDouble(x, y));
			}

			if( (i = pDEM->Get_Gradient_NeighborDir(x, y, true)) >= 0 && Get_System().Get_Neighbor_Pos(i, x, y, ix, iy) )
			{
				pArea->Add_Value(ix, iy, pArea->asDouble(x, y));

				if( pZMax->is_NoData(ix, iy) || pZMax->asDouble(ix, iy) < pZMax->asDouble(x, y) )
				{
					pZMax->Set_Value(ix, iy, pZMax->asDouble(x, y));
				}
			}

			pMRN->Set_Value(x, y, (pZMax->asDouble(x, y) - pDEM->asDouble(x, y)) / sqrt(pArea->asDouble(x, y)));
		}
	}

	//-----------------------------------------------------
	return( true );
}

开发者ID:johanvdw，项目名称:SAGA-GIS-git-mirror，代码行数:54，代码来源:melton_ruggedness.cpp

示例19: Parameters

//---------------------------------------------------------
bool CGrid_Classify_Supervised::Set_Classifier(CSG_Classifier_Supervised &Classifier)
{
	Classifier.Create(m_pFeatures->Get_Count());

	Classifier.Set_Threshold_Distance   (Parameters("THRESHOLD_DIST" )->asDouble());
	Classifier.Set_Threshold_Angle      (Parameters("THRESHOLD_ANGLE")->asDouble() * M_DEG_TO_RAD);
	Classifier.Set_Threshold_Probability(Parameters("THRESHOLD_PROB" )->asDouble());
	Classifier.Set_Probability_Relative (Parameters("RELATIVE_PROB"  )->asBool  ());

	for(int i=0; i<SG_CLASSIFY_SUPERVISED_WTA; i++)
	{
		Classifier.Set_WTA(i, Parameters(CSG_String::Format("WTA_%d", i))->asBool());
	}

	//-----------------------------------------------------
	if( Parameters("TRAINING")->asShapes() != NULL )	// training areas
	{
		if( !Set_Classifier(Classifier, Parameters("TRAINING")->asShapes(), Parameters("TRAINING_CLASS")->asInt()) )
		{
			Error_Set(_TL("could not initialize classifier from training areas"));

			return( false );
		}
	}
	else	// from file
	{
		if( !Classifier.Load(Parameters("FILE_LOAD")->asString()) )
		{
			Error_Set(_TL("could not initialize classifier from file"));

			return( false );
		}
	}

	//-----------------------------------------------------
	Message_Add(Classifier.Print(), false);

	return( true );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:40，代码来源:classify_supervised.cpp

示例20: Parameters

//---------------------------------------------------------
bool CShapes_Load::On_Execute(void)
{
	CSG_Shapes	*pShapes	= Parameters("SHAPES")->asShapes();
	CSG_String	Name		= Parameters("TABLES")->asString();

	if( !Get_Connection()->Shapes_Load(pShapes, Name) )
	{
		Error_Set(_TL("unable to load vector data from PostGIS database") + CSG_String(":\n") + Name);

		return( false );
	}

	return( true );
}

开发者ID:Fooway，项目名称:SAGA-GIS-git-mirror，代码行数:15，代码来源:pgis_shapes.cpp

注：本文中的Error_Set函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Error_init函数代码示例发布时间：2022-05-30

C++ Error_Handler函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19166|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8321|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ Error_Set函数代码示例

示例1: Error_Set

示例2: Parameters

示例3: Parameters

示例4: Parameters

示例5: Parameters

示例6: Parameters

示例7: Parameters

示例8: On_Execute

示例9: Error_Set

示例10: Parameters

示例11: Error_Set

示例12: Parameters

示例13: Parameters

示例14: Error_Set

示例15: Parameters

示例16: Parameters

示例17: Error_Set

示例18: Parameters

示例19: Parameters

示例20: Parameters

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

切微信小程序前端制作-设备管理主界面

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053