本文整理汇总了C++中EXT2_SB函数的典型用法代码示例。如果您正苦于以下问题：C++ EXT2_SB函数的具体用法？C++ EXT2_SB怎么用？C++ EXT2_SB使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了EXT2_SB函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ext2_show_options
static int ext2_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
struct ext2_sb_info *sbi = EXT2_SB(vfs->mnt_sb);
if (sbi->s_mount_opt & EXT2_MOUNT_GRPID)
seq_puts(seq, ",grpid");
#if defined(CONFIG_QUOTA)
if (sbi->s_mount_opt & EXT2_MOUNT_USRQUOTA)
seq_puts(seq, ",usrquota");
if (sbi->s_mount_opt & EXT2_MOUNT_GRPQUOTA)
seq_puts(seq, ",grpquota");
#endif
#if defined(CONFIG_EXT2_FS_XIP)
if (sbi->s_mount_opt & EXT2_MOUNT_XIP)
seq_puts(seq, ",xip");
#endif
return 0;
}
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:22，代码来源:super.c
示例2: ext2_sync_fs
static int ext2_sync_fs(struct super_block *sb, int wait)
{
struct ext2_super_block *es = EXT2_SB(sb)->s_es;
lock_kernel();
if (es->s_state & cpu_to_le16(EXT2_VALID_FS)) {
ext2_debug("setting valid to 0\n");
es->s_state &= cpu_to_le16(~EXT2_VALID_FS);
es->s_free_blocks_count =
cpu_to_le32(ext2_count_free_blocks(sb));
es->s_free_inodes_count =
cpu_to_le32(ext2_count_free_inodes(sb));
es->s_mtime = cpu_to_le32(get_seconds());
ext2_sync_super(sb, es);
} else {
ext2_commit_super(sb, es);
}
sb->s_dirt = 0;
unlock_kernel();
return 0;
}
开发者ID:sushengloong，项目名称:comp3301-s4239799，代码行数:22，代码来源:super.c
示例3: ERR_PTR
static struct dentry *ext2_get_dentry(struct super_block *sb, void *vobjp)
{
__u32 *objp = vobjp;
unsigned long ino = objp[0];
__u32 generation = objp[1];
struct inode *inode;
struct dentry *result;
if (ino < EXT2_FIRST_INO(sb) && ino != EXT2_ROOT_INO)
return ERR_PTR(-ESTALE);
if (ino > le32_to_cpu(EXT2_SB(sb)->s_es->s_inodes_count))
return ERR_PTR(-ESTALE);
/* iget isn't really right if the inode is currently unallocated!!
* ext2_read_inode currently does appropriate checks, but
* it might be "neater" to call ext2_get_inode first and check
* if the inode is valid.....
*/
inode = iget(sb, ino);
if (inode == NULL)
return ERR_PTR(-ENOMEM);
if (is_bad_inode(inode) ||
(generation && inode->i_generation != generation)) {
/* we didn't find the right inode.. */
iput(inode);
return ERR_PTR(-ESTALE);
}
/* now to find a dentry.
* If possible, get a well-connected one
*/
result = d_alloc_anon(inode);
if (!result) {
iput(inode);
return ERR_PTR(-ENOMEM);
}
return result;
}
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:37，代码来源:super.c
示例4: ext2_update_dynamic_rev
/*
* This must be called with sbi->s_lock held.
*/
void ext2_update_dynamic_rev(struct super_block *sb)
{
struct ext2_super_block *es = EXT2_SB(sb)->s_es;
if (le32_to_cpu(es->s_rev_level) > EXT2_GOOD_OLD_REV)
return;
ext2_msg(sb, KERN_WARNING,
"warning: updating to rev %d because of "
"new feature flag, running e2fsck is recommended",
EXT2_DYNAMIC_REV);
es->s_first_ino = cpu_to_le32(EXT2_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT2_GOOD_OLD_INODE_SIZE);
es->s_rev_level = cpu_to_le32(EXT2_DYNAMIC_REV);
/* leave es->s_feature_*compat flags alone */
/* es->s_uuid will be set by e2fsck if empty */
/*
* The rest of the superblock fields should be zero, and if not it
* means they are likely already in use, so leave them alone. We
* can leave it up to e2fsck to clean up any inconsistencies there.
*/
}
开发者ID:avagin，项目名称:linux，代码行数:27，代码来源:super.c
示例5: ext2_get_group_desc
/*
* get the group's descriptor of group_num
*/
static const struct ext2_group_desc *
ext2_get_group_desc(struct fs_info *fs, uint32_t group_num)
{
struct ext2_sb_info *sbi = EXT2_SB(fs);
uint32_t desc_block, desc_index;
const struct ext2_group_desc *desc_data_block;
if (group_num >= sbi->s_groups_count) {
printf ("ext2_get_group_desc"
"block_group >= groups_count - "
"block_group = %d, groups_count = %d",
group_num, sbi->s_groups_count);
return NULL;
}
desc_block = group_num / sbi->s_desc_per_block;
desc_index = group_num % sbi->s_desc_per_block;
desc_block += sbi->s_first_data_block + 1;
desc_data_block = get_cache(fs->fs_dev, desc_block);
return &desc_data_block[desc_index];
}
开发者ID:DedulyaOtmoroz，项目名称:syslinux，代码行数:27，代码来源:ext2.c
示例6: ext2_get_inode
static const struct ext2_inode *
ext2_get_inode(struct fs_info *fs, int inr)
{
const struct ext2_group_desc *desc;
const char *data;
uint32_t inode_group, inode_offset;
uint32_t block_num, block_off;
inr--;
inode_group = inr / EXT2_INODES_PER_GROUP(fs);
inode_offset = inr % EXT2_INODES_PER_GROUP(fs);
desc = ext2_get_group_desc(fs, inode_group);
if (!desc)
return NULL;
block_num = desc->bg_inode_table +
inode_offset / EXT2_INODES_PER_BLOCK(fs);
block_off = inode_offset % EXT2_INODES_PER_BLOCK(fs);
data = get_cache(fs->fs_dev, block_num);
return (const struct ext2_inode *)
(data + block_off * EXT2_SB(fs)->s_inode_size);
}
开发者ID:DedulyaOtmoroz，项目名称:syslinux，代码行数:24，代码来源:ext2.c
示例7: malloc
static char *ext2_fs_uuid(struct fs_info *fs)
{
char *uuid = NULL;
uuid = malloc(EXT2_UUID_LEN);
if (!uuid)
return NULL;
if (snprintf(uuid, EXT2_UUID_LEN,
"%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x",
EXT2_SB(fs)->s_uuid[0],
EXT2_SB(fs)->s_uuid[1],
EXT2_SB(fs)->s_uuid[2],
EXT2_SB(fs)->s_uuid[3],
EXT2_SB(fs)->s_uuid[4],
EXT2_SB(fs)->s_uuid[5],
EXT2_SB(fs)->s_uuid[6],
EXT2_SB(fs)->s_uuid[7],
EXT2_SB(fs)->s_uuid[8],
EXT2_SB(fs)->s_uuid[9],
EXT2_SB(fs)->s_uuid[10],
EXT2_SB(fs)->s_uuid[11],
EXT2_SB(fs)->s_uuid[12],
EXT2_SB(fs)->s_uuid[13],
EXT2_SB(fs)->s_uuid[14],
EXT2_SB(fs)->s_uuid[15]
) < 0) {
free(uuid);
return NULL;
}
return uuid;
}
开发者ID:Celelibi，项目名称:syslinux，代码行数:33，代码来源:ext2.c
示例8: ext2_fill_super
//.........这里部分代码省略.........
/* Set defaults before we parse the mount options */
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
if (def_mount_opts & EXT2_DEFM_DEBUG)
set_opt(sbi->s_mount_opt, DEBUG);
if (def_mount_opts & EXT2_DEFM_BSDGROUPS)
set_opt(sbi->s_mount_opt, GRPID);
if (def_mount_opts & EXT2_DEFM_UID16)
set_opt(sbi->s_mount_opt, NO_UID32);
#ifdef CONFIG_EXT2_FS_XATTR
if (def_mount_opts & EXT2_DEFM_XATTR_USER)
set_opt(sbi->s_mount_opt, XATTR_USER);
#endif
#ifdef CONFIG_EXT2_FS_POSIX_ACL
if (def_mount_opts & EXT2_DEFM_ACL)
set_opt(sbi->s_mount_opt, POSIX_ACL);
#endif
if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_PANIC)
set_opt(sbi->s_mount_opt, ERRORS_PANIC);
else if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_CONTINUE)
set_opt(sbi->s_mount_opt, ERRORS_CONT);
else
set_opt(sbi->s_mount_opt, ERRORS_RO);
sbi->s_resuid = le16_to_cpu(es->s_def_resuid);
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
set_opt(sbi->s_mount_opt, RESERVATION);
if (!parse_options ((char *) data, sbi))
goto failed_mount;
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((EXT2_SB(sb)->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ?
MS_POSIXACL : 0);
ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
EXT2_MOUNT_XIP if not */
if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV &&
(EXT2_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_INCOMPAT_FEATURE(sb, ~0U)))
printk("EXT2-fs warning: feature flags set on rev 0 fs, "
"running e2fsck is recommended\n");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
*/
features = EXT2_HAS_INCOMPAT_FEATURE(sb, ~EXT2_FEATURE_INCOMPAT_SUPP);
if (features) {
printk("EXT2-fs: %s: couldn't mount because of "
"unsupported optional features (%x).\n",
sb->s_id, le32_to_cpu(features));
goto failed_mount;
}
if (!(sb->s_flags & MS_RDONLY) &&
(features = EXT2_HAS_RO_COMPAT_FEATURE(sb, ~EXT2_FEATURE_RO_COMPAT_SUPP))){
printk("EXT2-fs: %s: couldn't mount RDWR because of "
"unsupported optional features (%x).\n",
sb->s_id, le32_to_cpu(features));
goto failed_mount;
}
blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
开发者ID:sushengloong，项目名称:comp3301-s4239799，代码行数:67，代码来源:super.c
示例9: ext2_show_options
static int ext2_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
struct super_block *sb = vfs->mnt_sb;
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = sbi->s_es;
unsigned long def_mount_opts;
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
if (sbi->s_sb_block != 1)
seq_printf(seq, ",sb=%lu", sbi->s_sb_block);
if (test_opt(sb, MINIX_DF))
seq_puts(seq, ",minixdf");
if (test_opt(sb, GRPID))
seq_puts(seq, ",grpid");
if (!test_opt(sb, GRPID) && (def_mount_opts & EXT2_DEFM_BSDGROUPS))
seq_puts(seq, ",nogrpid");
if (sbi->s_resuid != EXT2_DEF_RESUID ||
le16_to_cpu(es->s_def_resuid) != EXT2_DEF_RESUID) {
seq_printf(seq, ",resuid=%u", sbi->s_resuid);
}
if (sbi->s_resgid != EXT2_DEF_RESGID ||
le16_to_cpu(es->s_def_resgid) != EXT2_DEF_RESGID) {
seq_printf(seq, ",resgid=%u", sbi->s_resgid);
}
if (test_opt(sb, ERRORS_RO)) {
int def_errors = le16_to_cpu(es->s_errors);
if (def_errors == EXT2_ERRORS_PANIC ||
def_errors == EXT2_ERRORS_CONTINUE) {
seq_puts(seq, ",errors=remount-ro");
}
}
if (test_opt(sb, ERRORS_CONT))
seq_puts(seq, ",errors=continue");
if (test_opt(sb, ERRORS_PANIC))
seq_puts(seq, ",errors=panic");
if (test_opt(sb, NO_UID32))
seq_puts(seq, ",nouid32");
if (test_opt(sb, DEBUG))
seq_puts(seq, ",debug");
if (test_opt(sb, OLDALLOC))
seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT2_FS_XATTR
if (test_opt(sb, XATTR_USER))
seq_puts(seq, ",user_xattr");
if (!test_opt(sb, XATTR_USER) &&
(def_mount_opts & EXT2_DEFM_XATTR_USER)) {
seq_puts(seq, ",nouser_xattr");
}
#endif
#ifdef CONFIG_EXT2_FS_POSIX_ACL
if (test_opt(sb, POSIX_ACL))
seq_puts(seq, ",acl");
if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT2_DEFM_ACL))
seq_puts(seq, ",noacl");
#endif
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
#if defined(CONFIG_QUOTA)
if (sbi->s_mount_opt & EXT2_MOUNT_USRQUOTA)
seq_puts(seq, ",usrquota");
if (sbi->s_mount_opt & EXT2_MOUNT_GRPQUOTA)
seq_puts(seq, ",grpquota");
#endif
#if defined(CONFIG_EXT2_FS_XIP)
if (sbi->s_mount_opt & EXT2_MOUNT_XIP)
seq_puts(seq, ",xip");
#endif
if (!test_opt(sb, RESERVATION))
seq_puts(seq, ",noreservation");
return 0;
}
开发者ID:sushengloong，项目名称:comp3301-s4239799，代码行数:81，代码来源:super.c
示例10: ext2_statfs
static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf)
{
struct super_block *sb = dentry->d_sb;
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = sbi->s_es;
u64 fsid;
if (test_opt (sb, MINIX_DF))
sbi->s_overhead_last = 0;
else if (sbi->s_blocks_last != le32_to_cpu(es->s_blocks_count)) {
unsigned long i, overhead = 0;
smp_rmb();
/*
* Compute the overhead (FS structures). This is constant
* for a given filesystem unless the number of block groups
* changes so we cache the previous value until it does.
*/
/*
* All of the blocks before first_data_block are
* overhead
*/
overhead = le32_to_cpu(es->s_first_data_block);
/*
* Add the overhead attributed to the superblock and
* block group descriptors. If the sparse superblocks
* feature is turned on, then not all groups have this.
*/
for (i = 0; i < sbi->s_groups_count; i++)
overhead += ext2_bg_has_super(sb, i) +
ext2_bg_num_gdb(sb, i);
/*
* Every block group has an inode bitmap, a block
* bitmap, and an inode table.
*/
overhead += (sbi->s_groups_count *
(2 + sbi->s_itb_per_group));
sbi->s_overhead_last = overhead;
smp_wmb();
sbi->s_blocks_last = le32_to_cpu(es->s_blocks_count);
}
buf->f_type = EXT2_SUPER_MAGIC;
buf->f_bsize = sb->s_blocksize;
buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last;
buf->f_bfree = ext2_count_free_blocks(sb);
es->s_free_blocks_count = cpu_to_le32(buf->f_bfree);
buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count);
if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count))
buf->f_bavail = 0;
buf->f_files = le32_to_cpu(es->s_inodes_count);
buf->f_ffree = ext2_count_free_inodes(sb);
es->s_free_inodes_count = cpu_to_le32(buf->f_ffree);
buf->f_namelen = EXT2_NAME_LEN;
fsid = le64_to_cpup((void *)es->s_uuid) ^
le64_to_cpup((void *)es->s_uuid + sizeof(u64));
buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL;
buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL;
return 0;
}
开发者ID:sushengloong，项目名称:comp3301-s4239799，代码行数:63，代码来源:super.c
示例11: ext2_remount
static int ext2_remount (struct super_block * sb, int * flags, char * data)
{
struct ext2_sb_info * sbi = EXT2_SB(sb);
struct ext2_super_block * es;
unsigned long old_mount_opt = sbi->s_mount_opt;
struct ext2_mount_options old_opts;
unsigned long old_sb_flags;
int err;
lock_kernel();
/* Store the old options */
old_sb_flags = sb->s_flags;
old_opts.s_mount_opt = sbi->s_mount_opt;
old_opts.s_resuid = sbi->s_resuid;
old_opts.s_resgid = sbi->s_resgid;
/*
* Allow the "check" option to be passed as a remount option.
*/
if (!parse_options (data, sbi)) {
err = -EINVAL;
goto restore_opts;
}
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
EXT2_MOUNT_XIP if not */
if ((ext2_use_xip(sb)) && (sb->s_blocksize != PAGE_SIZE)) {
printk("XIP: Unsupported blocksize\n");
err = -EINVAL;
goto restore_opts;
}
es = sbi->s_es;
if (((sbi->s_mount_opt & EXT2_MOUNT_XIP) !=
(old_mount_opt & EXT2_MOUNT_XIP)) &&
invalidate_inodes(sb)) {
ext2_warning(sb, __func__, "refusing change of xip flag "
"with busy inodes while remounting");
sbi->s_mount_opt &= ~EXT2_MOUNT_XIP;
sbi->s_mount_opt |= old_mount_opt & EXT2_MOUNT_XIP;
}
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
unlock_kernel();
return 0;
}
if (*flags & MS_RDONLY) {
if (le16_to_cpu(es->s_state) & EXT2_VALID_FS ||
!(sbi->s_mount_state & EXT2_VALID_FS)) {
unlock_kernel();
return 0;
}
/*
* OK, we are remounting a valid rw partition rdonly, so set
* the rdonly flag and then mark the partition as valid again.
*/
es->s_state = cpu_to_le16(sbi->s_mount_state);
es->s_mtime = cpu_to_le32(get_seconds());
} else {
__le32 ret = EXT2_HAS_RO_COMPAT_FEATURE(sb,
~EXT2_FEATURE_RO_COMPAT_SUPP);
if (ret) {
printk("EXT2-fs: %s: couldn't remount RDWR because of "
"unsupported optional features (%x).\n",
sb->s_id, le32_to_cpu(ret));
err = -EROFS;
goto restore_opts;
}
/*
* Mounting a RDONLY partition read-write, so reread and
* store the current valid flag. (It may have been changed
* by e2fsck since we originally mounted the partition.)
*/
sbi->s_mount_state = le16_to_cpu(es->s_state);
if (!ext2_setup_super (sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
}
ext2_sync_super(sb, es);
unlock_kernel();
return 0;
restore_opts:
sbi->s_mount_opt = old_opts.s_mount_opt;
sbi->s_resuid = old_opts.s_resuid;
sbi->s_resgid = old_opts.s_resgid;
sb->s_flags = old_sb_flags;
unlock_kernel();
return err;
}
开发者ID:sushengloong，项目名称:comp3301-s4239799，代码行数:92，代码来源:super.c
示例12: ext2_setup_super
static int ext2_setup_super (struct super_block * sb,
struct ext2_super_block * es,
int read_only)
{
int res = 0;
struct ext2_sb_info *sbi = EXT2_SB(sb);
if (le32_to_cpu(es->s_rev_level) > EXT2_MAX_SUPP_REV) {
printk ("EXT2-fs warning: revision level too high, "
"forcing read-only mode\n");
res = MS_RDONLY;
}
if (read_only)
return res;
/* PR 28089 - Allow user to turn off a forced fsck in order
* to let user to mount a dirty FS RW
* Thus if FS is dirty and nocheck is the mount option, then
* FS is mounted RW.
*/
if (!(sbi->s_mount_state & EXT2_VALID_FS)) {
if (!test_opt (sb, CHECK))
printk ("EXT2-fs warning: mounting unclean fs with "
"errors in RW mode.\nRunning e2fsck is strongly urged "
"and recommended.\n");
else {
printk ("EXT2-fs warning: mounting unchecked fs read-only. "
"Running e2fsck is recommended before re-mounting read-write.\n");
sb->s_flags |= MS_RDONLY;
return MS_RDONLY;
}
}
/* PR 28089 - Allow user to turn off a forced fsck in order
* to let user to mount a dirty FS RW.
* Thus if FS is dirty and nocheck is the mount option, then
* FS is mounted RW.
*/
else if ((sbi->s_mount_state & EXT2_ERROR_FS)) {
if (!test_opt (sb, CHECK))
printk ("EXT2-fs warning: mounting unclean fs with "
"errors in RW mode.\nRunning e2fsck is strongly urged "
"and recommended.\n");
else {
printk ("EXT2-fs warning: mounting unchecked fs read-only. "
"Running e2fsck is recommended before re-mounting read-write.\n");
sb->s_flags |= MS_RDONLY;
return MS_RDONLY;
}
}
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count)) {
printk ("EXT2-fs warning: maximal mount count reached. Mounting read-only. "
"Running e2fsck is recommended before re-mounting read-write.\n");
sb->s_flags |= MS_RDONLY;
return MS_RDONLY;
}
else if (le32_to_cpu(es->s_checkinterval) &&
(le32_to_cpu(es->s_lastcheck) + le32_to_cpu(es->s_checkinterval) <= get_seconds())) {
printk ("EXT2-fs warning: checktime reached. Mounting read-only. "
"Running e2fsck is recommended before re-mounting read-write.\n");
sb->s_flags |= MS_RDONLY;
return MS_RDONLY;
}
if (!le16_to_cpu(es->s_max_mnt_count))
es->s_max_mnt_count = cpu_to_le16(EXT2_DFL_MAX_MNT_COUNT);
es->s_mnt_count=cpu_to_le16(le16_to_cpu(es->s_mnt_count) + 1);
ext2_write_super(sb);
if (test_opt (sb, DEBUG))
printk ("[EXT II FS %s, %s, bs=%lu, fs=%lu, gc=%lu, "
"bpg=%lu, ipg=%lu, mo=%04lx]\n",
EXT2FS_VERSION, EXT2FS_DATE, sb->s_blocksize,
sbi->s_frag_size,
sbi->s_groups_count,
EXT2_BLOCKS_PER_GROUP(sb),
EXT2_INODES_PER_GROUP(sb),
sbi->s_mount_opt);
#ifdef CONFIG_EXT2_CHECK
if (test_opt (sb, CHECK)) {
ext2_check_blocks_bitmap (sb);
ext2_check_inodes_bitmap (sb);
}
#endif
return res;
}
开发者ID:foxsat-hdr，项目名称:linux-kernel，代码行数:84，代码来源:super.c
示例13: ext2_read_super
struct super_block * ext2_read_super (struct super_block * sb, void * data,
int silent)
{
struct buffer_head * bh;
struct ext2_sb_info * sbi = EXT2_SB(sb);
struct ext2_super_block * es;
unsigned long sb_block = 1;
unsigned short resuid = EXT2_DEF_RESUID;
unsigned short resgid = EXT2_DEF_RESGID;
unsigned long block;
unsigned long logic_sb_block;
unsigned long offset = 0;
kdev_t dev = sb->s_dev;
int blocksize = BLOCK_SIZE;
int db_count;
int i, j;
/*
* See what the current blocksize for the device is, and
* use that as the blocksize. Otherwise (or if the blocksize
* is smaller than the default) use the default.
* This is important for devices that have a hardware
* sectorsize that is larger than the default.
*/
blocksize = get_hardsect_size(dev);
if(blocksize < BLOCK_SIZE )
blocksize = BLOCK_SIZE;
sb->u.ext2_sb.s_mount_opt = 0;
if (!parse_options ((char *) data, &sb_block, &resuid, &resgid,
&sb->u.ext2_sb.s_mount_opt)) {
return NULL;
}
if (set_blocksize(dev, blocksize) < 0) {
printk ("EXT2-fs: unable to set blocksize %d\n", blocksize);
return NULL;
}
sb->s_blocksize = blocksize;
/*
* If the superblock doesn't start on a sector boundary,
* calculate the offset. FIXME(eric) this doesn't make sense
* that we would have to do this.
*/
if (blocksize != BLOCK_SIZE) {
logic_sb_block = (sb_block*BLOCK_SIZE) / blocksize;
offset = (sb_block*BLOCK_SIZE) % blocksize;
} else {
logic_sb_block = sb_block;
}
if (!(bh = sb_bread(sb, logic_sb_block))) {
printk ("EXT2-fs: unable to read superblock\n");
return NULL;
}
/*
* Note: s_es must be initialized as soon as possible because
* some ext2 macro-instructions depend on its value
*/
es = (struct ext2_super_block *) (((char *)bh->b_data) + offset);
sb->u.ext2_sb.s_es = es;
sb->s_magic = le16_to_cpu(es->s_magic);
if (sb->s_magic != EXT2_SUPER_MAGIC) {
if (!silent)
printk ("VFS: Can't find ext2 filesystem on dev %s.\n",
bdevname(dev));
goto failed_mount;
}
if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV &&
(EXT2_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_INCOMPAT_FEATURE(sb, ~0U)))
printk("EXT2-fs warning: feature flags set on rev 0 fs, "
"running e2fsck is recommended\n");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
*/
if ((i = EXT2_HAS_INCOMPAT_FEATURE(sb, ~EXT2_FEATURE_INCOMPAT_SUPP))) {
printk("EXT2-fs: %s: couldn't mount because of "
"unsupported optional features (%x).\n",
bdevname(dev), i);
goto failed_mount;
}
if (!(sb->s_flags & MS_RDONLY) &&
(i = EXT2_HAS_RO_COMPAT_FEATURE(sb, ~EXT2_FEATURE_RO_COMPAT_SUPP))){
printk("EXT2-fs: %s: couldn't mount RDWR because of "
"unsupported optional features (%x).\n",
bdevname(dev), i);
goto failed_mount;
}
if (EXT2_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL))
ext2_warning(sb, __FUNCTION__,
"mounting ext3 filesystem as ext2\n");
sb->s_blocksize_bits =
le32_to_cpu(EXT2_SB(sb)->s_es->s_log_block_size) + 10;
sb->s_blocksize = 1 << sb->s_blocksize_bits;
//.........这里部分代码省略.........
开发者ID:JBTech，项目名称:ralink_rt5350，代码行数:101，代码来源:super.c
示例14: parse_options
static int parse_options(char *options, struct super_block *sb)
{
char *p;
struct ext2_sb_info *sbi = EXT2_SB(sb);
substring_t args[MAX_OPT_ARGS];
int option;
if (!options)
return 1;
while ((p = strsep (&options, ",")) != NULL) {
int token;
if (!*p)
continue;
token = match_token(p, tokens, args);
switch (token) {
case Opt_bsd_df:
clear_opt (sbi->s_mount_opt, MINIX_DF);
break;
case Opt_minix_df:
set_opt (sbi->s_mount_opt, MINIX_DF);
break;
case Opt_grpid:
set_opt (sbi->s_mount_opt, GRPID);
break;
case Opt_nogrpid:
clear_opt (sbi->s_mount_opt, GRPID);
break;
case Opt_resuid:
if (match_int(&args[0], &option))
return 0;
sbi->s_resuid = option;
break;
case Opt_resgid:
if (match_int(&args[0], &option))
return 0;
sbi->s_resgid = option;
break;
case Opt_sb:
/* handled by get_sb_block() instead of here */
/* *sb_block = match_int(&args[0]); */
break;
case Opt_err_panic:
clear_opt (sbi->s_mount_opt, ERRORS_CONT);
clear_opt (sbi->s_mount_opt, ERRORS_RO);
set_opt (sbi->s_mount_opt, ERRORS_PANIC);
break;
case Opt_err_ro:
clear_opt (sbi->s_mount_opt, ERRORS_CONT);
clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
set_opt (sbi->s_mount_opt, ERRORS_RO);
break;
case Opt_err_cont:
clear_opt (sbi->s_mount_opt, ERRORS_RO);
clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
set_opt (sbi->s_mount_opt, ERRORS_CONT);
break;
case Opt_nouid32:
set_opt (sbi->s_mount_opt, NO_UID32);
break;
case Opt_nocheck:
clear_opt (sbi->s_mount_opt, CHECK);
break;
case Opt_debug:
set_opt (sbi->s_mount_opt, DEBUG);
break;
case Opt_oldalloc:
set_opt (sbi->s_mount_opt, OLDALLOC);
break;
case Opt_orlov:
clear_opt (sbi->s_mount_opt, OLDALLOC);
break;
case Opt_nobh:
set_opt (sbi->s_mount_opt, NOBH);
break;
#ifdef CONFIG_EXT2_FS_XATTR
case Opt_user_xattr:
set_opt (sbi->s_mount_opt, XATTR_USER);
break;
case Opt_nouser_xattr:
clear_opt (sbi->s_mount_opt, XATTR_USER);
break;
#else
case Opt_user_xattr:
case Opt_nouser_xattr:
ext2_msg(sb, KERN_INFO, "(no)user_xattr options"
"not supported");
break;
#endif
#ifdef CONFIG_EXT2_FS_POSIX_ACL
case Opt_acl:
set_opt(sbi->s_mount_opt, POSIX_ACL);
break;
case Opt_noacl:
clear_opt(sbi->s_mount_opt, POSIX_ACL);
break;
#else
case Opt_acl:
case Opt_noacl:
//.........这里部分代码省略.........
开发者ID:kronenpj，项目名称:samsung-s3c6410-android.2.0，代码行数:101，代码来源:super.c
示例15: ext2_fill_super
//.........这里部分代码省略.........
/* Set defaults before we parse the mount options */
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
if (def_mount_opts & EXT2_DEFM_DEBUG)
set_opt(sbi->s_mount_opt, DEBUG);
if (def_mount_opts & EXT2_DEFM_BSDGROUPS)
set_opt(sbi->s_mount_opt, GRPID);
if (def_mount_opts & EXT2_DEFM_UID16)
set_opt(sbi->s_mount_opt, NO_UID32);
#ifdef CONFIG_EXT2_FS_XATTR
if (def_mount_opts & EXT2_DEFM_XATTR_USER)
set_opt(sbi->s_mount_opt, XATTR_USER);
#endif
#ifdef CONFIG_EXT2_FS_POSIX_ACL
if (def_mount_opts & EXT2_DEFM_ACL)
set_opt(sbi->s_mount_opt, POSIX_ACL);
#endif
if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_PANIC)
set_opt(sbi->s_mount_opt, ERRORS_PANIC);
else if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_CONTINUE)
set_opt(sbi->s_mount_opt, ERRORS_CONT);
else
set_opt(sbi->s_mount_opt, ERRORS_RO);
sbi->s_resuid = make_kuid(&init_user_ns, le16_to_cpu(es->s_def_resuid));
sbi->s_resgid = make_kgid(&init_user_ns, le16_to_cpu(es->s_def_resgid));
set_opt(sbi->s_mount_opt, RESERVATION);
if (!parse_options((char *) data, sb))
goto failed_mount;
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((EXT2_SB(sb)->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ?
MS_POSIXACL : 0);
sb->s_iflags |= SB_I_CGROUPWB;
if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV &&
(EXT2_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_INCOMPAT_FEATURE(sb, ~0U)))
ext2_msg(sb, KERN_WARNING,
"warning: feature flags set on rev 0 fs, "
"running e2fsck is recommended");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
*/
features = EXT2_HAS_INCOMPAT_FEATURE(sb, ~EXT2_FEATURE_INCOMPAT_SUPP);
if (features) {
ext2_msg(sb, KERN_ERR, "error: couldn't mount because of "
"unsupported optional features (%x)",
le32_to_cpu(features));
goto failed_mount;
}
if (!(sb->s_flags & MS_RDONLY) &&
(features = EXT2_HAS_RO_COMPAT_FEATURE(sb, ~EXT2_FEATURE_RO_COMPAT_SUPP))){
ext2_msg(sb, KERN_ERR, "error: couldn't mount RDWR because of "
"unsupported optional features (%x)",
le32_to_cpu(features));
goto failed_mount;
}
blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
开发者ID:faddat，项目名称:linux-mainline-next，代码行数:66，代码来源:super.c
示例16: ext2_remount
static int ext2_remount (struct super_block * sb, int * flags, char * data)
{
struct ext2_sb_info * sbi = EXT2_SB(sb);
struct ext2_super_block * es;
struct ext2_mount_options old_opts;
unsigned long old_sb_flags;
int err;
sync_filesystem(sb);
spin_lock(&sbi->s_lock);
/* Store the old options */
old_sb_flags = sb->s_flags;
old_opts.s_mount_opt = sbi->s_mount_opt;
old_opts.s_resuid = sbi->s_resuid;
old_opts.s_resgid = sbi->s_resgid;
/*
* Allow the "check" option to be passed as a remount option.
*/
if (!parse_options(data, sb)) {
err = -EINVAL;
goto restore_opts;
}
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
es = sbi->s_es;
if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT2_MOUNT_DAX) {
ext2_msg(sb, KERN_WARNING, "warning: refusing change of "
"dax flag with busy inodes while remounting");
sbi->s_mount_opt ^= EXT2_MOUNT_DAX;
}
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
spin_unlock(&sbi->s_lock);
return 0;
}
if (*flags & MS_RDONLY) {
if (le16_to_cpu(es->s_state) & EXT2_VALID_FS ||
!(sbi->s_mount_state & EXT2_VALID_FS)) {
spin_unlock(&sbi->s_lock);
return 0;
}
/*
* OK, we are remounting a valid rw partition rdonly, so set
* the rdonly flag and then mark the partition as valid again.
*/
es->s_state = cpu_to_le16(sbi->s_mount_state);
es->s_mtime = cpu_to_le32(get_seconds());
spin_unlock(&sbi->s_lock);
err = dquot_suspend(sb, -1);
if (err < 0) {
spin_lock(&sbi->s_lock);
goto restore_opts;
}
ext2_sync_super(sb, es, 1);
} else {
__le32 ret = EXT2_HAS_RO_COMPAT_FEATURE(sb,
~EXT2_FEATURE_RO_COMPAT_SUPP);
if (ret) {
ext2_msg(sb, KERN_WARNING,
"warning: couldn't remount RDWR because of "
"unsupported optional features (%x).",
le32_to_cpu(ret));
err = -EROFS;
goto restore_opts;
}
/*
* Mounting a RDONLY partition read-write, so reread and
* store the current valid flag. (It may have been changed
* by e2fsck since we originally mounted the partition.)
*/
sbi->s_mount_state = le16_to_cpu(es->s_state);
if (!ext2_setup_super (sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
spin_unlock(&sbi->s_lock);
ext2_write_super(sb);
dquot_resume(sb, -1);
}
return 0;
restore_opts:
sbi->s_mount_opt = old_opts.s_mount_opt;
sbi->s_resuid = old_opts.s_resuid;
sbi->s_resgid = old_opts.s_resgid;
sb->s_flags = old_sb_flags;
spin_unlock(&sbi->s_lock);
return err;
}
开发者ID:mdamt，项目名称:linux，代码行数:95，代码来源:super.c
示例17: parse_options
static int parse_options(char *options, struct super_block *sb)
{
char *p;
struct ext2_sb_info *sbi = EXT2_SB(sb);
substring_t args[MAX_OPT_ARGS];
int option;
kuid_t uid;
kgid_t gid;
if (!options)
return 1;
while ((p = strsep (&options, ",")) != NULL) {
int token;
if (!*p)
continue;
token = match_token(p, tokens, args);
switch (token) {
case Opt_bsd_df:
clear_opt (sbi->s_mount_opt, MINIX_DF);
break;
case Opt_minix_df:
set_opt (sbi->s_mount_opt, MINIX_DF);
break;
case Opt_grpid:
set_opt (sbi->s_mount_opt, GRPID);
break;
case Opt_nogrpid:
clear_opt (sbi->s_mount_opt, GRPID);
break;
case Opt_resuid:
if (match_int(&args[0], &option))
return 0;
uid = make_kuid(current_user_ns(), option);
if (!uid_valid(uid)) {
ext2_msg(sb, KERN_ERR, "Invalid uid value %d", option);
return 0;
}
sbi->s_resuid = uid;
break;
case Opt_resgid:
if (match_int(&args[0], &option))
return 0;
gid = make_kgid(current_user_ns(), option);
if (!gid_valid(gid)) {
ext2_msg(sb, KERN_ERR, "Invalid gid value %d", option);
return 0;
}
sbi->s_resgid = gid;
break;
case Opt_sb:
/* handled by get_sb_block() instead of here */
/* *sb_block = match_int(&args[0]); */
break;
case Opt_err_panic:
clear_opt (sbi->s_mount_opt, ERRORS_CONT);
clear_opt (sbi->s_mount_opt, ERRORS_RO);
set_opt (sbi->s_mount_opt, ERRORS_PANIC);
break;
case Opt_err_ro:
clear_opt (sbi->s_mount_opt, ERRORS_CONT);
clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
set_opt (sbi->s_mount_opt, ERRORS_RO);
break;
case Opt_err_cont:
clear_opt (sbi->s_mount_opt, ERRORS_RO);
clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
set_opt (sbi->s_mount_opt, ERRORS_CONT);
break;
case Opt_nouid32:
set_opt (sbi->s_mount_opt, NO_UID32);
break;
case Opt_nocheck:
clear_opt (sbi->s_mount_opt, CHECK);
break;
case Opt_debug:
set_opt (sbi->s_mount_opt, DEBUG);
break;
case Opt_oldalloc:
set_opt (sbi->s_mount_opt, OLDALLOC);
break;
case Opt_orlov:
clear_opt (sbi->s_mount_opt, OLDALLOC);
break;
case Opt_nobh:
set_opt (sbi->s_mount_opt, NOBH);
break;
#ifdef CONFIG_EXT2_FS_XATTR
case Opt_user_xattr:
set_opt (sbi->s_mount_opt, XATTR_USER);
break;
case Opt_nouser_xattr:
clear_opt (sbi->s_mount_opt, XATTR_USER);
break;
#else
case Opt_user_xattr:
case Opt_nouser_xattr:
ext2_msg(sb, KERN_INFO, "(no)user_xattr options"
//.........这里部分代码省略.........
开发者ID:mdamt，项目名称:linux，代码行数:101，代码来源:super.c
注：本文中的EXT2_SB函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论