C++ EVP_CipherInit函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中EVP_CipherInit函数的典型用法代码示例。如果您正苦于以下问题：C++ EVP_CipherInit函数的具体用法？C++ EVP_CipherInit怎么用？C++ EVP_CipherInit使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了EVP_CipherInit函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cipher_init

void
cipher_init(CipherContext *cc, Cipher *cipher,
    const u_char *key, u_int keylen, const u_char *iv, u_int ivlen,
    int encrypt)
{
	static int dowarn = 1;
#ifdef SSH_OLD_EVP
	EVP_CIPHER *type;
#else
	const EVP_CIPHER *type;
#endif
	int klen;

	if (cipher->number == SSH_CIPHER_DES) {
		if (dowarn) {
			error("Warning: use of DES is strongly discouraged "
			    "due to cryptographic weaknesses");
			dowarn = 0;
		}
		if (keylen > 8)
			keylen = 8;
	}
	cc->plaintext = (cipher->number == SSH_CIPHER_NONE);

	if (keylen < cipher->key_len)
		fatal("cipher_init: key length %d is insufficient for %s.",
		    keylen, cipher->name);
	if (iv != NULL && ivlen < cipher->block_size)
		fatal("cipher_init: iv length %d is insufficient for %s.",
		    ivlen, cipher->name);
	cc->cipher = cipher;

	type = (*cipher->evptype)();

	EVP_CIPHER_CTX_init(&cc->evp);
#ifdef SSH_OLD_EVP
	if (type->key_len > 0 && type->key_len != keylen) {
		debug("cipher_init: set keylen (%d -> %d)",
		    type->key_len, keylen);
		type->key_len = keylen;
	}
	EVP_CipherInit(&cc->evp, type, (u_char *)key, (u_char *)iv,
	    (encrypt == CIPHER_ENCRYPT));
#else
	if (EVP_CipherInit(&cc->evp, type, NULL, (u_char *)iv,
	    (encrypt == CIPHER_ENCRYPT)) == 0)
		fatal("cipher_init: EVP_CipherInit failed for %s",
		    cipher->name);
	klen = EVP_CIPHER_CTX_key_length(&cc->evp);
	if (klen > 0 && keylen != klen) {
		debug("cipher_init: set keylen (%d -> %d)", klen, keylen);
		if (EVP_CIPHER_CTX_set_key_length(&cc->evp, keylen) == 0)
			fatal("cipher_init: set keylen failed (%d -> %d)",
			    klen, keylen);
	}
	if (EVP_CipherInit(&cc->evp, NULL, (u_char *)key, NULL, -1) == 0)
		fatal("cipher_init: EVP_CipherInit: set key failed for %s",
		    cipher->name);
#endif
}

开发者ID:andreiw，项目名称:polaris，代码行数:60，代码来源:cipher.c

示例2: cipher_init

void
cipher_init(CipherContext *cc, Cipher *cipher,
    const u_char *key, u_int keylen, const u_char *iv, u_int ivlen,
    int do_encrypt)
{
	static int dowarn = 1;
	const EVP_CIPHER *type;
	int klen;
	u_char *junk, *discard;

	if (cipher->number == SSH_CIPHER_DES) {
		if (dowarn) {
			error("Warning: use of DES is strongly discouraged "
			    "due to cryptographic weaknesses");
			dowarn = 0;
		}
		if (keylen > 8)
			keylen = 8;
	}
	cc->plaintext = (cipher->number == SSH_CIPHER_NONE);

	if (keylen < cipher->key_len)
		fatal("cipher_init: key length %d is insufficient for %s.",
		    keylen, cipher->name);
	if (iv != NULL && ivlen < cipher->block_size)
		fatal("cipher_init: iv length %d is insufficient for %s.",
		    ivlen, cipher->name);
	cc->cipher = cipher;

	type = (*cipher->evptype)();

	EVP_CIPHER_CTX_init(&cc->evp);
	if (EVP_CipherInit(&cc->evp, type, NULL, __UNCONST(iv),
	    (do_encrypt == CIPHER_ENCRYPT)) == 0)
		fatal("cipher_init: EVP_CipherInit failed for %s",
		    cipher->name);
	klen = EVP_CIPHER_CTX_key_length(&cc->evp);
	if (klen > 0 && keylen != (u_int)klen) {
		debug2("cipher_init: set keylen (%d -> %d)", klen, keylen);
		if (EVP_CIPHER_CTX_set_key_length(&cc->evp, keylen) == 0)
			fatal("cipher_init: set keylen failed (%d -> %d)",
			    klen, keylen);
	}
	if (EVP_CipherInit(&cc->evp, NULL, __UNCONST(key), NULL, -1) == 0)
		fatal("cipher_init: EVP_CipherInit: set key failed for %s",
		    cipher->name);

	if (cipher->discard_len > 0) {
		junk = xmalloc(cipher->discard_len);
		discard = xmalloc(cipher->discard_len);
		if (EVP_Cipher(&cc->evp, discard, junk,
		    cipher->discard_len) == 0)
			fatal("evp_crypt: EVP_Cipher failed during discard");
		memset(discard, 0, cipher->discard_len);
		xfree(junk);
		xfree(discard);
	}
}

开发者ID:gosudream，项目名称:netbsd-src，代码行数:58，代码来源:cipher.c

示例3: _libssh2_cipher_init

int
_libssh2_cipher_init(_libssh2_cipher_ctx * h,
                     _libssh2_cipher_type(algo),
                     unsigned char *iv, unsigned char *secret, int encrypt)
{
#ifdef HAVE_OPAQUE_STRUCTS
    *h = EVP_CIPHER_CTX_new();
    return !EVP_CipherInit(*h, algo(), secret, iv, encrypt);
#else
    EVP_CIPHER_CTX_init(h);
    return !EVP_CipherInit(h, algo(), secret, iv, encrypt);
#endif
}

开发者ID:stinb，项目名称:libssh2，代码行数:13，代码来源:openssl.c

示例4: tls_process_record_data

int
tls_process_record_data(struct SSLConnection *conn, const opaque *fragment,
                        const int len, uint8_t **out, uint32_t *outl)
{
    EVP_CIPHER_CTX *evp;
    uint8_t pad;
    size_t flen = len;

    tls_debug_print_hex("Ciphertext", fragment, len);

    if (conn->direction == 0) {
        evp = &conn->client_cipher_ctx;
    } else {
        evp = &conn->server_cipher_ctx;
    }

    // TLS 1.1 and later extract explicit IV
    if (conn->version >= 2 && len > 16) {
        if (conn->direction == 0) {
            EVP_CipherInit(evp, conn->ciph,
                           conn->key_material.client_write_key,
                           fragment, 0);
        } else {
            EVP_CipherInit(evp, conn->ciph,
                           conn->key_material.server_write_key,
                           fragment, 0);
        }
        flen -= 16;
        fragment += 16;
    }

    size_t dlen = len;
    uint8_t *decoded = sng_malloc(dlen);
    EVP_Cipher(evp, decoded, (unsigned char *) fragment, flen);
    tls_debug_print_hex("Plaintext", decoded, flen);

    // Get padding counter and remove from data
    pad = decoded[flen - 1];
    dlen = flen - (pad + 1);
    tls_debug_print_hex("Mac", decoded + (dlen - 20), 20);

    if ((int32_t)dlen > 0 && dlen <= *outl) {
        memcpy(*out, decoded, dlen);
        *outl = dlen - 20 /* Trailing MAC */;
    }

    // Clenaup decoded memory
    sng_free(decoded);
    return *outl;
}

开发者ID:cruzccl，项目名称:sngrep，代码行数:50，代码来源:capture_openssl.c

示例5: csf_write_page

static size_t csf_write_page(CSF_CTX *ctx, int pgno, void *data, size_t data_sz) {
  off_t start_offset = HDR_SZ + (pgno * ctx->page_sz);
  off_t cur_offset =  lseek(*ctx->fh, 0L, SEEK_CUR);
  int to_write = ctx->page_sz;
  size_t write_sz = 0;
  CSF_PAGE_HEADER header;

  assert(data_sz <= ctx->data_sz);

  header.data_sz = data_sz;

  if(cur_offset != start_offset) { /* if not in proper position for page, seek there */
    cur_offset = lseek(*ctx->fh, start_offset, SEEK_SET);
  }
  
  RAND_pseudo_bytes(ctx->page_buffer, ctx->iv_sz);

  memcpy(ctx->scratch_buffer, &header, sizeof(header));
  memcpy(ctx->scratch_buffer + ctx->page_header_sz, data, data_sz);

  /* normally this would encrypt here */
  if(ctx->encrypted) {
    EVP_CIPHER_CTX ectx;
    void *out_ptr =  ctx->page_buffer + ctx->iv_sz;
    int out_sz, cipher_sz = 0;

    EVP_CipherInit(&ectx, CIPHER, NULL, NULL, 1);
    EVP_CIPHER_CTX_set_padding(&ectx, 0);
    EVP_CipherInit(&ectx, NULL, ctx->key_data, ctx->page_buffer, 1);
    EVP_CipherUpdate(&ectx, out_ptr + cipher_sz, &out_sz, ctx->scratch_buffer, ctx->page_header_sz + ctx->data_sz);
    cipher_sz += out_sz;
    EVP_CipherFinal(&ectx, out_ptr + cipher_sz, &out_sz);
    cipher_sz += out_sz;
    EVP_CIPHER_CTX_cleanup(&ectx);
    assert(cipher_sz == (ctx->page_header_sz + ctx->data_sz));
  } else {
    memcpy(ctx->page_buffer + ctx->iv_sz, ctx->scratch_buffer, ctx->page_header_sz + ctx->data_sz);
  }

  for(;write_sz < to_write;) { /* FIXME - error handling */ 
    size_t bytes_write = write(*ctx->fh, ctx->page_buffer + write_sz, to_write - write_sz);
    write_sz += bytes_write;
  }  
  
  TRACE6("csf_write_page(%d,%d,x,%d), cur_offset=%d, write_sz= %d\n", *ctx->fh, pgno, data_sz, cur_offset, write_sz);

  return data_sz;
}

开发者ID:sjlombardo，项目名称:csfio，代码行数:48，代码来源:csfio.c

示例6: ssh_EVP_CipherInit

int
ssh_EVP_CipherInit(EVP_CIPHER_CTX *evp, const EVP_CIPHER *type,
    unsigned char *key, unsigned char *iv, int enc)
{
	EVP_CipherInit(evp, type, key, iv, enc);
	return 1;
}

开发者ID:jogindersingh1985，项目名称:openssha，代码行数:7，代码来源:openssl-compat.c

示例7: sqlcipher_openssl_cipher

static int sqlcipher_openssl_cipher(void *ctx, int mode, unsigned char *key, int key_sz, unsigned char *iv, unsigned char *in, int in_sz, unsigned char *out) {
  EVP_CIPHER_CTX ectx;
  int tmp_csz, csz;
 
  EVP_CipherInit(&ectx, ((openssl_ctx *)ctx)->evp_cipher, NULL, NULL, mode);
  EVP_CIPHER_CTX_set_padding(&ectx, 0); // no padding
  EVP_CipherInit(&ectx, NULL, key, iv, mode);
  EVP_CipherUpdate(&ectx, out, &tmp_csz, in, in_sz);
  csz = tmp_csz;  
  out += tmp_csz;
  EVP_CipherFinal(&ectx, out, &tmp_csz);
  csz += tmp_csz;
  EVP_CIPHER_CTX_cleanup(&ectx);
  assert(in_sz == csz);
  return SQLITE_OK; 
}

开发者ID:akrav，项目名称:sqlcipher，代码行数:16，代码来源:crypto_openssl.c

示例8: cipher_ctx_init

void
cipher_ctx_init(EVP_CIPHER_CTX *ctx, const uint8_t *key, int key_len,
                const EVP_CIPHER *kt, int enc)
{
    ASSERT(NULL != kt && NULL != ctx);

    EVP_CIPHER_CTX_init(ctx);
    if (!EVP_CipherInit(ctx, kt, NULL, NULL, enc))
    {
        crypto_msg(M_FATAL, "EVP cipher init #1");
    }
#ifdef HAVE_EVP_CIPHER_CTX_SET_KEY_LENGTH
    if (!EVP_CIPHER_CTX_set_key_length(ctx, key_len))
    {
        crypto_msg(M_FATAL, "EVP set key size");
    }
#endif
    if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, NULL, enc))
    {
        crypto_msg(M_FATAL, "EVP cipher init #2");
    }

    /* make sure we used a big enough key */
    ASSERT(EVP_CIPHER_CTX_key_length(ctx) <= key_len);
}

开发者ID:lstipakov，项目名称:openvpn，代码行数:25，代码来源:crypto_openssl.c

示例9: encryptfile

void encryptfile(FILE * fpin,FILE* fpout,unsigned char* key, unsigned char* iv)
{
	//Using openssl EVP to encrypt a file

	
	const unsigned bufsize = 4096;
	unsigned char* read_buf = malloc(bufsize);
	unsigned char* cipher_buf ;
	unsigned blocksize;
	int out_len;

	EVP_CIPHER_CTX ctx;

	EVP_CipherInit(&ctx,EVP_aes_256_cbc(),key,iv,1);
	blocksize = EVP_CIPHER_CTX_block_size(&ctx);
	cipher_buf = malloc(bufsize+blocksize);

	// read file and write encrypted file until eof
	while(1)
	{
		int bytes_read = fread(read_buf,sizeof(unsigned char),bufsize,fpin);
		EVP_CipherUpdate(&ctx,cipher_buf,&out_len,read_buf, bytes_read);
		fwrite(cipher_buf,sizeof(unsigned char),out_len,fpout);
		if(bytes_read < bufsize)
		{
			break;//EOF
		}
	}

	EVP_CipherFinal(&ctx,cipher_buf,&out_len);
	fwrite(cipher_buf,sizeof(unsigned char),out_len,fpout);

	free(cipher_buf);
	free(read_buf);
}

开发者ID:roothaxor，项目名称:Ransom，代码行数:35，代码来源:encrypter.c

示例10: _libssh2_cipher_init

int
_libssh2_cipher_init(_libssh2_cipher_ctx * h,
                     _libssh2_cipher_type(algo),
                     unsigned char *iv, unsigned char *secret, int encrypt)
{
    EVP_CIPHER_CTX_init(h);
    return !EVP_CipherInit(h, algo(), secret, iv, encrypt);
}

开发者ID:tomgr，项目名称:libssh2，代码行数:8，代码来源:openssl.c

示例11: csf_read_page

static size_t csf_read_page(CSF_CTX *ctx, int pgno, void *data) {
  off_t start_offset = HDR_SZ + (pgno * ctx->page_sz);
  off_t cur_offset =  lseek(*ctx->fh, 0L, SEEK_CUR);
  int to_read = ctx->page_sz;
  size_t read_sz = 0;
  CSF_PAGE_HEADER header;

  if(cur_offset != start_offset) { /* if not in proper position for page, seek there */
    cur_offset = lseek(*ctx->fh, start_offset, SEEK_SET);
  }
 
  /* FIXME - error handling */
  for(;read_sz < to_read;) {
    size_t bytes_read = read(*ctx->fh, ctx->page_buffer + read_sz, to_read - read_sz);
    read_sz += bytes_read;
    if(bytes_read < 0) {
      return 0;
    }
  }  

  if(ctx->encrypted) {
    EVP_CIPHER_CTX ectx;
    void *out_ptr =  ctx->scratch_buffer;
    int out_sz, cipher_sz = 0;

    EVP_CipherInit(&ectx, CIPHER, NULL, NULL, 0);
    EVP_CIPHER_CTX_set_padding(&ectx, 0);
    EVP_CipherInit(&ectx, NULL, ctx->key_data, ctx->page_buffer, 0);
    EVP_CipherUpdate(&ectx, out_ptr + cipher_sz, &out_sz, ctx->page_buffer + ctx->iv_sz, ctx->page_header_sz + ctx->data_sz);
    cipher_sz += out_sz;
    EVP_CipherFinal(&ectx, out_ptr + cipher_sz, &out_sz);
    cipher_sz += out_sz;
    EVP_CIPHER_CTX_cleanup(&ectx);
    assert(cipher_sz == (ctx->page_header_sz + ctx->data_sz));
  } else {
    memcpy(ctx->scratch_buffer, ctx->page_buffer + ctx->iv_sz, ctx->page_header_sz + ctx->data_sz);
  }

  memcpy(&header, ctx->scratch_buffer, sizeof(header));
  memcpy(data, ctx->scratch_buffer + ctx->page_header_sz, header.data_sz);

  TRACE6("csf_read_page(%d,%d,x), cur_offset=%d, read_sz=%d, return=%d\n", *ctx->fh, pgno, cur_offset, read_sz, data_sz);

  return header.data_sz;
}

开发者ID:sjlombardo，项目名称:csfio，代码行数:45，代码来源:csfio.c

示例12: codec_cipher

/*
 * ctx - codec context
 * pgno - page number in database
 * size - size in bytes of input and output buffers
 * mode - 1 to encrypt, 0 to decrypt
 * in - pointer to input bytes
 * out - pouter to output bytes
 */
static int codec_cipher(codec_ctx *ctx, Pgno pgno, int mode, int size, void *in, void *out) {
  EVP_CIPHER_CTX ectx;
  void *iv;
  int tmp_csz, csz;

  /* when this is an encryption operation and rekey is not null, we will actually encrypt
  ** data with the new rekey data */
  void *key = ((mode == CIPHER_ENCRYPT && ctx->rekey != NULL) ? ctx->rekey : ctx->key);

  /* just copy raw data from in to out whenever 
  ** 1. key is NULL; or 
  ** 2. this is a decrypt operation and rekey_plaintext is true
  */ 
  if(key == NULL || (mode==CIPHER_DECRYPT && ctx->rekey_plaintext)) {
    memcpy(out, in, size);
    return SQLITE_OK;
  } 

  size = size - ctx->iv_sz; /* adjust size to useable size and memset reserve at end of page */
  iv = out + size;
  if(mode == CIPHER_ENCRYPT) {
    RAND_pseudo_bytes(iv, ctx->iv_sz);
  } else {
    memcpy(iv, in+size, ctx->iv_sz);
  } 
  
  EVP_CipherInit(&ectx, CIPHER, NULL, NULL, mode);
  EVP_CIPHER_CTX_set_padding(&ectx, 0);
  EVP_CipherInit(&ectx, NULL, key, iv, mode);
  EVP_CipherUpdate(&ectx, out, &tmp_csz, in, size);
  csz = tmp_csz;  
  out += tmp_csz;
  EVP_CipherFinal(&ectx, out, &tmp_csz);
  csz += tmp_csz;
  EVP_CIPHER_CTX_cleanup(&ectx);
  assert(size == csz);

  return SQLITE_OK;
}

开发者ID:qianwang，项目名称:sqlcipher，代码行数:47，代码来源:crypto.c

示例13: ssh1_3des_init

static int
ssh1_3des_init(EVP_CIPHER_CTX *ctx, const u_char *key, const u_char *iv,
    int enc)
{
	struct ssh1_3des_ctx *c;
	u_char *k1, *k2, *k3;

	if ((c = EVP_CIPHER_CTX_get_app_data(ctx)) == NULL) {
		if ((c = calloc(1, sizeof(*c))) == NULL)
			return 0;
		EVP_CIPHER_CTX_set_app_data(ctx, c);
	}
	if (key == NULL)
		return 1;
	if (enc == -1)
		enc = ctx->encrypt;
	k1 = k2 = k3 = __UNCONST(key);
	k2 += 8;
	if (EVP_CIPHER_CTX_key_length(ctx) >= 16+8) {
		if (enc)
			k3 += 16;
		else
			k1 += 16;
	}
	EVP_CIPHER_CTX_init(&c->k1);
	EVP_CIPHER_CTX_init(&c->k2);
	EVP_CIPHER_CTX_init(&c->k3);
	if (EVP_CipherInit(&c->k1, EVP_des_cbc(), k1, NULL, enc) == 0 ||
	    EVP_CipherInit(&c->k2, EVP_des_cbc(), k2, NULL, !enc) == 0 ||
	    EVP_CipherInit(&c->k3, EVP_des_cbc(), k3, NULL, enc) == 0) {
		explicit_bzero(c, sizeof(*c));
		free(c);
		EVP_CIPHER_CTX_set_app_data(ctx, NULL);
		return 0;
	}
	return 1;
}

开发者ID:knakahara，项目名称:netbsd-src，代码行数:37，代码来源:cipher-3des1.c

示例14: ssh1_3des_init

static int
ssh1_3des_init(EVP_CIPHER_CTX *ctx, const u_char *key, const u_char *iv,
    int enc)
{
	struct ssh1_3des_ctx *c;
	u_char *k1, *k2, *k3;

	if ((c = EVP_CIPHER_CTX_get_app_data(ctx)) == NULL) {
		c = xmalloc(sizeof(*c));
		EVP_CIPHER_CTX_set_app_data(ctx, c);
	}
	if (key == NULL)
		return (1);
	if (enc == -1)
		enc = ctx->encrypt;
	k1 = k2 = k3 = (u_char *) key;
	k2 += 8;
	if (EVP_CIPHER_CTX_key_length(ctx) >= 16+8) {
		if (enc)
			k3 += 16;
		else
			k1 += 16;
	}
	EVP_CIPHER_CTX_init(&c->k1);
	EVP_CIPHER_CTX_init(&c->k2);
	EVP_CIPHER_CTX_init(&c->k3);
	if (EVP_CipherInit(&c->k1, EVP_des_cbc(), k1, NULL, enc) == 0 ||
	    EVP_CipherInit(&c->k2, EVP_des_cbc(), k2, NULL, !enc) == 0 ||
	    EVP_CipherInit(&c->k3, EVP_des_cbc(), k3, NULL, enc) == 0) {
		memset(c, 0, sizeof(*c));
		xfree(c);
		EVP_CIPHER_CTX_set_app_data(ctx, NULL);
		return (0);
	}
	return (1);
}

开发者ID:UNGLinux，项目名称:Obase，代码行数:36，代码来源:cipher-3des1.c

示例15: openssl_evp_comcrypt

void openssl_evp_comcrypt()
{
	EVP_CIPHER_CTX ctx;
	int i, len1 = 0, len2 = 0, len3 = 0;
	unsigned char outs[MAX1_LEN], des[MAX1_LEN];
	unsigned char msg[MAX1_LEN] = "openssl common encrypt test";
	unsigned char iv[EVP_MAX_KEY_LENGTH], key[EVP_MAX_KEY_LENGTH];

	for (i = 0; i < 24; i++)
		key[i] = i;
	for (i = 0; i < 8; i++)
		iv[i] = i;
	memset(des, 0, sizeof(des));
	memset(outs, 0, sizeof(outs));

	EVP_CIPHER_CTX_init(&ctx);
	EVP_CipherInit(&ctx, EVP_des_ede3_cbc(), key, iv, 1);
	EVP_CipherUpdate(&ctx, outs, &len1, msg, strlen((char *)msg));
	EVP_CipherFinal(&ctx, outs + len1, &len3);
	len1 += len3;
	printf("\nEVP_COMEncry (%s) = ", msg);
	for (i = 0; i < len1; i++)
		printf("0x%.02x ", outs[i]);
	EVP_CIPHER_CTX_cleanup(&ctx);
	
	EVP_CIPHER_CTX_init(&ctx);
	EVP_CipherInit(&ctx, EVP_des_ede3_cbc(), key, iv, 0);
	EVP_CipherUpdate(&ctx, des, &len2, outs, len1);
	EVP_CipherFinal(&ctx, des + len2, &len3);
	len2 += len3;
	printf("\nEVP_COMDecry (");
	for (i = 0; i < len1; i++)
		printf("0x%.02x ", outs[i]);
	printf(") = %s\n", des);
	EVP_CIPHER_CTX_cleanup(&ctx);
}

开发者ID:beike2020，项目名称:source，代码行数:36，代码来源:openssl_base.c

示例16: sb_aes_init

/*
 * AES libcrypto
 */
static int sb_aes_init(struct sb_image_ctx *ictx, uint8_t *iv, int enc)
{
	EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx;
	int ret;

	/* If there is no init vector, init vector is all zeroes. */
	if (!iv)
		iv = ictx->image_key;

	EVP_CIPHER_CTX_init(ctx);
	ret = EVP_CipherInit(ctx, EVP_aes_128_cbc(), ictx->image_key, iv, enc);
	if (ret == 1)
		EVP_CIPHER_CTX_set_padding(ctx, 0);
	return ret;
}

开发者ID:DeviceSolutions，项目名称:u-boot-opal6，代码行数:18，代码来源:mxsimage.c

示例17: codec_cipher

/*
 * ctx - codec context
 * pgno - page number in database
 * size - size in bytes of input and output buffers
 * mode - 1 to encrypt, 0 to decrypt
 * in - pointer to input bytes
 * out - pouter to output bytes
 */
static int codec_cipher(cipher_ctx *ctx, Pgno pgno, int mode, int size, unsigned char *in, unsigned char *out) {
  EVP_CIPHER_CTX ectx;
  unsigned char *iv;
  int tmp_csz, csz;

  CODEC_TRACE(("codec_cipher:entered pgno=%d, mode=%d, size=%d\n", pgno, mode, size));

  /* just copy raw data from in to out when key size is 0
   * i.e. during a rekey of a plaintext database */ 
  if(ctx->key_sz == 0) {
    memcpy(out, in, size);
    return SQLITE_OK;
  } 

  // FIXME - only run if using an IV
  size = size - ctx->iv_sz; /* adjust size to useable size and memset reserve at end of page */
  iv = out + size;
  if(mode == CIPHER_ENCRYPT) {
    RAND_pseudo_bytes(iv, ctx->iv_sz);
  } else {
    memcpy(iv, in+size, ctx->iv_sz);
  } 
  
  EVP_CipherInit(&ectx, ctx->evp_cipher, NULL, NULL, mode);
  EVP_CIPHER_CTX_set_padding(&ectx, 0);
  EVP_CipherInit(&ectx, NULL, ctx->key, iv, mode);
  EVP_CipherUpdate(&ectx, out, &tmp_csz, in, size);
  csz = tmp_csz;  
  out += tmp_csz;
  EVP_CipherFinal(&ectx, out, &tmp_csz);
  csz += tmp_csz;
  EVP_CIPHER_CTX_cleanup(&ectx);
  assert(size == csz);

  return SQLITE_OK;
}

开发者ID:TheDleo，项目名称:ocRosa，代码行数:44，代码来源:crypto.c

示例18: BIO_set_cipher

void BIO_set_cipher(BIO *b, EVP_CIPHER *c, unsigned char *k, unsigned char *i,
	     int e)
	{
	BIO_ENC_CTX *ctx;

	if (b == NULL) return;

	if ((b->callback != NULL) &&
		(b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,0L) <= 0))
		return;

	b->init=1;
	ctx=(BIO_ENC_CTX *)b->ptr;
	EVP_CipherInit(&(ctx->cipher),c,k,i,e);
	
	if (b->callback != NULL)
		b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,1L);
	}

开发者ID:ahenroid，项目名称:ptptl-0.2，代码行数:18，代码来源:bio_ber.c

示例19: rc2_get_asn1_type_and_iv

static int rc2_get_asn1_type_and_iv(EVP_CIPHER_CTX *c, ASN1_TYPE *type)
{
    long num=0;
    int i=0,l;
    int key_bits;
    unsigned char iv[EVP_MAX_IV_LENGTH];

    if (type != NULL)
    {
        l=EVP_CIPHER_CTX_iv_length(c);
        i=ASN1_TYPE_get_int_octetstring(type,&num,iv,l);
        if (i != l)
            return(-1);
        key_bits =rc2_magic_to_meth((int)num);
        if (!key_bits)
            return(-1);
        if(i > 0) EVP_CipherInit(c, NULL, NULL, iv, -1);
        EVP_CIPHER_CTX_ctrl(c, EVP_CTRL_SET_RC2_KEY_BITS, key_bits, NULL);
        EVP_CIPHER_CTX_set_key_length(c, key_bits / 8);
    }
    return(i);
}

开发者ID:houzhenggang，项目名称:mt7688_mips_ecos，代码行数:22，代码来源:e_rc2.c

示例20: crypto_recv_file

/*
 * Recieves AES-CBC-128 bit encrypted file from sender and decrypts the file
 * and saves it to the file specified in the arguments
 * SSL *conn                -> The SSL connection for the sender's node
 * const unsigned char *key -> The already instantiated AES Key for decryption
 * const char *fname        -> The name of the file to be stored
 * returns the total amount of bytes read and decrypted
 */
ssize_t crypto_recv_file(SSL *conn, const unsigned char *key, const char *fname)
{
    int len, ciph_len, first = 0;
    size_t total = 0;
    unsigned char plaintxt[BUFFSIZE];
    unsigned char ciphtxt[BUFFSIZE];
    unsigned char iv[IV_LEN];
    EVP_CIPHER_CTX cntx;
    FILE *file;
    if((file = fopen(fname, "wb")) == nullptr) {
        return FILE_NOT_FOUND;
    }
    while ((len = (int)ssl_recv(conn,(char *)ciphtxt, sizeof(ciphtxt))-1) > 0) {
        if(!first) {
            memcpy(iv, ciphtxt+1, sizeof(iv));
            EVP_CipherInit(&cntx, EVP_aes_128_cbc(), key, iv, DECRYPT);
        }
        EVP_CipherUpdate(&cntx, plaintxt, &ciph_len, ciphtxt+1, len);
        total += fwrite(plaintxt+(first?0:16), 1,
                        (size_t)ciph_len-(first?0:16), file);

        /* Last transmission of the file */
        if(len < BUFFSIZE-1) break;
        first++;
    }
    if (len < 0) goto err;
    EVP_CipherFinal(&cntx, plaintxt, &ciph_len);
    total+=fwrite(plaintxt, 1, (size_t)ciph_len, file);
    EVP_CIPHER_CTX_cleanup(&cntx);
    WAITFORACK(conn);
    fclose(file);
    return total;

    err:
    perror("GOTHERE");
    EVP_CIPHER_CTX_cleanup(&cntx);
    die_with_err("send() failed");
    return 1;
}

开发者ID:twahlfeld，项目名称:ttunnel，代码行数:47，代码来源:secsock.cpp

注：本文中的EVP_CipherInit函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ EVP_CipherInit_ex函数代码示例发布时间：2022-05-30

C++ EVP_CipherFinal_ex函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19166|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8321|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ EVP_CipherInit函数代码示例

示例1: cipher_init

示例2: cipher_init

示例3: _libssh2_cipher_init

示例4: tls_process_record_data

示例5: csf_write_page

示例6: ssh_EVP_CipherInit

示例7: sqlcipher_openssl_cipher

示例8: cipher_ctx_init

示例9: encryptfile

示例10: _libssh2_cipher_init

示例11: csf_read_page

示例12: codec_cipher

示例13: ssh1_3des_init

示例14: ssh1_3des_init

示例15: openssl_evp_comcrypt

示例16: sb_aes_init

示例17: codec_cipher

示例18: BIO_set_cipher

示例19: rc2_get_asn1_type_and_iv

示例20: crypto_recv_file

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

切微信小程序前端制作-设备管理主界面

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053