C++ ESP_ERROR_CHECK函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ESP_ERROR_CHECK函数的典型用法代码示例。如果您正苦于以下问题：C++ ESP_ERROR_CHECK函数的具体用法？C++ ESP_ERROR_CHECK怎么用？C++ ESP_ERROR_CHECK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ESP_ERROR_CHECK函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: wifi_init_softap

void wifi_init_softap()
{
    ap_event_group = xEventGroupCreate();

    //tcpip_adapter_init();

    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
    wifi_config_t wifi_config = {
        .ap = {
            .ssid = EXAMPLE_DEFAULT_SSID,
            .ssid_len = 0,
            .max_connection=EXAMPLE_MAX_STA_CONN,
            .password = EXAMPLE_DEFAULT_PWD,
            .authmode = WIFI_AUTH_WPA_WPA2_PSK
        },
    };
    if (strlen(EXAMPLE_DEFAULT_PWD) ==0) {
	wifi_config.ap.authmode = WIFI_AUTH_OPEN;
    }

    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_AP));
    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_AP, &wifi_config));
    ESP_ERROR_CHECK(esp_wifi_start());

    ESP_LOGI(TAG, "wifi_init_softap finished.SSID:%s password:%s \n",
    	    EXAMPLE_DEFAULT_SSID, EXAMPLE_DEFAULT_PWD);
}

开发者ID:fanhuanji，项目名称:esp32_baidu_rest，代码行数:28，代码来源:wifi.c

示例2: sc_callback

static void sc_callback(smartconfig_status_t status, void *pdata)
{
    switch (status) {
        case SC_STATUS_WAIT:
            ESP_LOGI(TAG, "SC_STATUS_WAIT");
            break;
        case SC_STATUS_FIND_CHANNEL:
            ESP_LOGI(TAG, "SC_STATUS_FINDING_CHANNEL");
            break;
        case SC_STATUS_GETTING_SSID_PSWD:
            ESP_LOGI(TAG, "SC_STATUS_GETTING_SSID_PSWD");
            break;
        case SC_STATUS_LINK:
            ESP_LOGI(TAG, "SC_STATUS_LINK");
            wifi_config_t *wifi_config = pdata;
            ESP_LOGI(TAG, "SSID:%s", wifi_config->sta.ssid);
            ESP_LOGI(TAG, "PASSWORD:%s", wifi_config->sta.password);
            ESP_ERROR_CHECK( esp_wifi_disconnect() );
            ESP_ERROR_CHECK( esp_wifi_set_config(ESP_IF_WIFI_STA, wifi_config) );
            ESP_ERROR_CHECK( esp_wifi_connect() );
            break;
        case SC_STATUS_LINK_OVER:
            ESP_LOGI(TAG, "SC_STATUS_LINK_OVER");
            if (pdata != NULL) {
                uint8_t phone_ip[4] = { 0 };
                memcpy(phone_ip, (uint8_t* )pdata, 4);
                ESP_LOGI(TAG, "Phone ip: %d.%d.%d.%d\n", phone_ip[0], phone_ip[1], phone_ip[2], phone_ip[3]);
            }
            xEventGroupSetBits(wifi_event_group, ESPTOUCH_DONE_BIT);
            break;
        default:
            break;
    }
}

开发者ID:danathughes，项目名称:esp-idf，代码行数:34，代码来源:smartconfig_main.c

示例3: app_main

void app_main()
{
  vTaskDelay(1000 / portTICK_PERIOD_MS);

  ESP_ERROR_CHECK(nvs_flash_init_partition("Mynvs"));

  nvs_handle handle;
  ESP_ERROR_CHECK(nvs_open_from_partition("Mynvs","store", NVS_READWRITE, &handle));

  int32_t val = 0;
  esp_err_t result = nvs_get_i32(handle, "val", &val);
  switch (result)
  {
  case ESP_ERR_NOT_FOUND:
    ESP_LOGE(TAG, "Value not set yet");
    break;
  case ESP_OK:
    ESP_LOGI(TAG, "Value is %d", val);
    break;
  default:
    ESP_LOGE(TAG, "Error (%s) opening NVS handle!\n", esp_err_to_name(result));
    break;
  }
  val++;
  ESP_ERROR_CHECK(nvs_set_i32(handle, "val", val));
  ESP_ERROR_CHECK(nvs_commit(handle));
  nvs_close(handle);
}

开发者ID:Mair，项目名称:esp32-course，代码行数:28，代码来源:main.c

示例4: event_handler

static esp_err_t event_handler(void *ctx, system_event_t *event)
{
    httpd_handle_t *server = (httpd_handle_t *) ctx;

    switch(event->event_id) {
    case SYSTEM_EVENT_STA_START:
        ESP_LOGI(TAG, "SYSTEM_EVENT_STA_START");
        ESP_ERROR_CHECK(esp_wifi_connect());
        break;
    case SYSTEM_EVENT_STA_GOT_IP:
        ESP_LOGI(TAG, "SYSTEM_EVENT_STA_GOT_IP");
        ESP_LOGI(TAG, "Got IP: '%s'",
                ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));

        /* Start the web server */
        if (*server == NULL) {
            *server = start_webserver();
        }
        break;
    case SYSTEM_EVENT_STA_DISCONNECTED:
        ESP_LOGI(TAG, "SYSTEM_EVENT_STA_DISCONNECTED");
        ESP_ERROR_CHECK(esp_wifi_connect());

        /* Stop the web server */
        if (*server) {
            stop_webserver(*server);
            *server = NULL;
        }
        break;
    default:
        break;
    }
    return ESP_OK;
}

开发者ID:espressif，项目名称:ESP8266_RTOS_SDK，代码行数:34，代码来源:main.c

示例5: app_main

void app_main(void)
{
    // Initialize NVS
    esp_err_t ret = nvs_flash_init();

    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        ret = nvs_flash_init();
    }

    ESP_ERROR_CHECK(ret);

    initialise_wifi();

    ret = xTaskCreate(&mqtt_client_thread,
                      MQTT_CLIENT_THREAD_NAME,
                      MQTT_CLIENT_THREAD_STACK_WORDS,
                      NULL,
                      MQTT_CLIENT_THREAD_PRIO,
                      NULL);

    if (ret != pdPASS)  {
        ESP_LOGE(TAG, "mqtt create client thread %s failed", MQTT_CLIENT_THREAD_NAME);
    }
}

开发者ID:espressif，项目名称:ESP8266_RTOS_SDK，代码行数:25，代码来源:MQTTEcho.c

示例6: wifi_cmd_sta_join

static bool wifi_cmd_sta_join(const char* ssid, const char* pass)
{
    int bits = xEventGroupWaitBits(wifi_event_group, CONNECTED_BIT, 0, 1, 0);

    wifi_config_t wifi_config = { 0 };

    strlcpy((char*) wifi_config.sta.ssid, ssid, sizeof(wifi_config.sta.ssid));
    if (pass) {
        strncpy((char*) wifi_config.sta.password, pass, sizeof(wifi_config.sta.password));
    }

    if (bits & CONNECTED_BIT) {
        reconnect = false;
        xEventGroupClearBits(wifi_event_group, CONNECTED_BIT);
        ESP_ERROR_CHECK( esp_wifi_disconnect() );
        xEventGroupWaitBits(wifi_event_group, DISCONNECTED_BIT, 0, 1, portTICK_RATE_MS);
    }

    reconnect = true;
    ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
    ESP_ERROR_CHECK( esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
    ESP_ERROR_CHECK( esp_wifi_connect() );

    xEventGroupWaitBits(wifi_event_group, CONNECTED_BIT, 0, 1, 5000/portTICK_RATE_MS);
    
    return true;
}

开发者ID:danathughes，项目名称:esp-idf，代码行数:27，代码来源:cmd_wifi.c

示例7: setup_gpios

static void setup_gpios()
{
    // Input:
    //     4: Joy #2 Pot x
    //
    // Output:
    //     5: Joy #1 Pot X
    //    21: Joy #1 Pot X

    // Output: 5 (LED) and 21
    gpio_config_t io_conf;
    io_conf.intr_type = GPIO_INTR_DISABLE;
    io_conf.mode = GPIO_MODE_OUTPUT;
    io_conf.pin_bit_mask = ((1ULL << GPIO_NUM_21) | (1ULL << GPIO_NUM_5));
    io_conf.pull_down_en = false;
    io_conf.pull_up_en = false;
    ESP_ERROR_CHECK( gpio_config(&io_conf) );

    // Input: read POT X
    io_conf.intr_type = GPIO_INTR_POSEDGE;
    io_conf.mode = GPIO_MODE_INPUT;
    io_conf.pin_bit_mask = 1ULL << GPIO_NUM_18;
    io_conf.pull_down_en = false;
    io_conf.pull_up_en = true;
    ESP_ERROR_CHECK( gpio_config(&io_conf) );

    // install gpio isr service
    ESP_ERROR_CHECK( gpio_install_isr_service(0) );

    //hook isr handler for specific gpio pin
    ESP_ERROR_CHECK( gpio_isr_handler_add(GPIO_NUM_18, gpio_isr_handler_up, (void*) GPIO_NUM_18) );

 //   ESP_ERROR_CHECK( gpio_isr_register(gpio_isr_handler_up, (void*) GPIO_NUM_4, 0, NULL) );
}

开发者ID:ricardoquesada，项目名称:unijoysticle，代码行数:34，代码来源:main.c

示例8: test_spi_task

void test_spi_task(void *ignore) {
	ESP_LOGD(tag, ">> test_spi_task");

	spi_bus_config_t bus_config;
	bus_config.sclk_io_num = 21; // CLK
	bus_config.mosi_io_num = 22; // MOSI
	bus_config.miso_io_num = -1; // MISO
	bus_config.quadwp_io_num = -1; // Not used
	bus_config.quadhd_io_num = -1; // Not used
	ESP_LOGI(tag, "... Initializing bus.");
	ESP_ERROR_CHECK(spi_bus_initialize(HSPI_HOST, &bus_config, 1));


	spi_device_handle_t handle;
	spi_device_interface_config_t dev_config;
	dev_config.address_bits = 0;
	dev_config.command_bits = 0;
	dev_config.dummy_bits = 0;
	dev_config.mode = 0;
	dev_config.duty_cycle_pos = 0;
	dev_config.cs_ena_posttrans = 0;
	dev_config.cs_ena_pretrans = 0;
	dev_config.clock_speed_hz = 10000;
	dev_config.spics_io_num = 23;
	dev_config.flags = 0;
	dev_config.queue_size = 1;
	dev_config.pre_cb = NULL;
	dev_config.post_cb = NULL;
	ESP_LOGI(tag, "... Adding device bus.");
	ESP_ERROR_CHECK(spi_bus_add_device(HSPI_HOST, &dev_config, &handle));


	char data[3];
	spi_transaction_t trans_desc;
	trans_desc.address = 0;
	trans_desc.command = 0;
	trans_desc.flags = 0;
	trans_desc.length = 3 * 8;
	trans_desc.rxlength = 0;
	trans_desc.tx_buffer = data;
	trans_desc.rx_buffer = data;

	data[0] = 0x12;
	data[1] = 0x34;
	data[2] = 0x56;

	ESP_LOGI(tag, "... Transmitting.");
	ESP_ERROR_CHECK(spi_device_transmit(handle, &trans_desc));

	ESP_LOGI(tag, "... Removing device.");
	ESP_ERROR_CHECK(spi_bus_remove_device(handle));

	ESP_LOGI(tag, "... Freeing bus.");
	ESP_ERROR_CHECK(spi_bus_free(HSPI_HOST));

	ESP_LOGD(tag, "<< test_spi_task");
	vTaskDelete(NULL);
}

开发者ID:EdWeller，项目名称:esp32-snippets，代码行数:58，代码来源:spi_transmit.c

示例9: saveConnectionInfo

/**
 * Save our connection info for retrieval on a subsequent restart.
 */
static void saveConnectionInfo(connection_info_t *pConnectionInfo) {
	nvs_handle handle;
	ESP_ERROR_CHECK(nvs_open(BOOTWIFI_NAMESPACE, NVS_READWRITE, &handle));
	ESP_ERROR_CHECK(nvs_set_blob(handle, KEY_CONNECTION_INFO, pConnectionInfo,
			sizeof(connection_info_t)));
	ESP_ERROR_CHECK(nvs_set_u32(handle, KEY_VERSION, g_version));
	ESP_ERROR_CHECK(nvs_commit(handle));
	nvs_close(handle);
} // setConnectionInfo

开发者ID:EdWeller，项目名称:esp32-snippets，代码行数:12，代码来源:bootwifi.c

示例10: initialise_wifi

static void initialise_wifi(void)
{
	wifi_event_group = xEventGroupCreate();
	ESP_ERROR_CHECK(esp_event_loop_init(event_handler, NULL));
	wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
	ESP_ERROR_CHECK(esp_wifi_init(&cfg));
	ESP_ERROR_CHECK(esp_wifi_set_storage(WIFI_STORAGE_RAM));
	ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA));
	ESP_ERROR_CHECK(esp_wifi_start());
}

开发者ID:Nicholas3388，项目名称:LuaNode，代码行数:10，代码来源:app_main.c

示例11: scan_task

static void scan_task(void *pvParameters)
{
	while(1) {
		xEventGroupWaitBits(wifi_event_group, SCAN_DONE_BIT, false, true, portMAX_DELAY);
        ESP_LOGI(TAG, "WIFI scan doen");
		xEventGroupClearBits(wifi_event_group, SCAN_DONE_BIT);

		uint16_t apCount = 0;
		esp_wifi_scan_get_ap_num(&apCount);
		printf("Number of access points found: %d\n", apCount);
		if (apCount == 0) {
			ESP_LOGI(TAG, "Nothing AP found");
			return;
		}
		wifi_ap_record_t *list = (wifi_ap_record_t *)malloc(sizeof(wifi_ap_record_t) * apCount);
		ESP_ERROR_CHECK(esp_wifi_scan_get_ap_records(&apCount, list));
		int i;
		printf("======================================================================\n");
		printf("             SSID             |    RSSI    |           AUTH           \n");
		printf("======================================================================\n");
		for (i=0; i<apCount; i++) {
			char *authmode;
			switch(list[i].authmode) {
			case WIFI_AUTH_OPEN:
               authmode = "WIFI_AUTH_OPEN";
               break;
            case WIFI_AUTH_WEP:
               authmode = "WIFI_AUTH_WEP";
               break;           
            case WIFI_AUTH_WPA_PSK:
               authmode = "WIFI_AUTH_WPA_PSK";
               break;           
            case WIFI_AUTH_WPA2_PSK:
               authmode = "WIFI_AUTH_WPA2_PSK";
               break;           
            case WIFI_AUTH_WPA_WPA2_PSK:
               authmode = "WIFI_AUTH_WPA_WPA2_PSK";
               break;
            default:
               authmode = "Unknown";
               break;
			}
			printf("%26.26s    |    % 4d    |    %22.22s\n",list[i].ssid, list[i].rssi, authmode);
		}
		free(list);
		printf("\n\n");

		// scan again
		vTaskDelay(2000 / portTICK_PERIOD_MS);
		//The true parameter cause the function to block until the scan is done.
		ESP_ERROR_CHECK(esp_wifi_scan_start(&scanConf, true));
	}


}

开发者ID:Nicholas3388，项目名称:LuaNode，代码行数:55，代码来源:app_main.c

示例12: assert

void Service::register_characteristic(Characteristic *nC) {
	assert(handle != 0);
	if(nC->is_descriptor) {
		auto ret = esp_ble_gatts_add_char_descr(handle, &(nC->id), nC->perm, &(nC->value), &(nC->autoResp));
		ESP_ERROR_CHECK(ret);
	}
	else {
		auto ret = esp_ble_gatts_add_char(handle, &(nC->id), nC->perm, nC->prop, &(nC->value), &(nC->autoResp));
		ESP_ERROR_CHECK(ret);
	}
}

开发者ID:XasWorks，项目名称:XasCode，代码行数:11，代码来源:Service.cpp

示例13: initI2C

void initI2C() {
	i2c_config_t conf;
	conf.mode = I2C_MODE_MASTER;
	conf.sda_io_num = SDA_PIN;
	conf.scl_io_num = SCL_PIN;
	conf.sda_pullup_en = GPIO_PULLUP_ENABLE;
	conf.scl_pullup_en = GPIO_PULLUP_ENABLE;
	conf.master.clk_speed = 100000;
	ESP_ERROR_CHECK(i2c_param_config(I2C_NUM_0, &conf));
	ESP_ERROR_CHECK(i2c_driver_install(I2C_NUM_0, I2C_MODE_MASTER, 0, 0, 0));
}

开发者ID:pilate，项目名称:esp32-snippets，代码行数:11，代码来源:pcf8523.c

示例14: app_main

void app_main()
{
    // Initialize NVS
    esp_err_t ret = nvs_flash_init();
    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        ret = nvs_flash_init();
    }
    ESP_ERROR_CHECK( ret );

    wifi_scan();
}

开发者ID:danathughes，项目名称:esp-idf，代码行数:12，代码来源:scan.c

示例15: app_main

void app_main()
{
    /* Initialize NVS — it is used to store PHY calibration data */
    esp_err_t ret = nvs_flash_init();
    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        ret = nvs_flash_init();
    }
    ESP_ERROR_CHECK( ret );

    start_wps();
}

开发者ID:danathughes，项目名称:esp-idf，代码行数:12，代码来源:wps.c

示例16: initialize_console

void initialize_console()
{
    /* Disable buffering on stdin */
    setvbuf(stdin, NULL, _IONBF, 0);

    /* Minicom, screen, idf_monitor send CR when ENTER key is pressed */
    esp_vfs_dev_uart_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
    /* Move the caret to the beginning of the next line on '\n' */
    esp_vfs_dev_uart_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);

    /* Configure UART. Note that REF_TICK is used so that the baud rate remains
     * correct while APB frequency is changing in light sleep mode.
     */
    uart_config_t uart_config;
    memset(&uart_config, 0, sizeof(uart_config));
    uart_config.baud_rate = CONFIG_CONSOLE_UART_BAUDRATE;
    uart_config.data_bits = UART_DATA_8_BITS;
    uart_config.parity = UART_PARITY_DISABLE;
    uart_config.stop_bits = UART_STOP_BITS_1;
    uart_config.use_ref_tick = true;
    ESP_ERROR_CHECK(uart_param_config((uart_port_t) CONFIG_CONSOLE_UART_NUM, &uart_config));

    /* Install UART driver for interrupt-driven reads and writes */
    ESP_ERROR_CHECK(uart_driver_install((uart_port_t) CONFIG_CONSOLE_UART_NUM,
                                         256, 0, 0, NULL, 0));

    /* Tell VFS to use UART driver */
    esp_vfs_dev_uart_use_driver(CONFIG_CONSOLE_UART_NUM);

    /* Initialize the console */
    esp_console_config_t console_config;
    memset(&console_config, 0, sizeof(console_config));
    console_config.max_cmdline_args = 8;
    console_config.max_cmdline_length = 256;
#if CONFIG_LOG_COLORS
    console_config.hint_color = atoi(LOG_COLOR_CYAN);
#endif
    ESP_ERROR_CHECK(esp_console_init(&console_config));

    /* Configure linenoise line completion library */
    /* Enable multiline editing. If not set, long commands will scroll within
     * single line.
     */
    linenoiseSetMultiLine(1);

    /* Tell linenoise where to get command completions and hints */
    linenoiseSetCompletionCallback(&esp_console_get_completion);
    linenoiseSetHintsCallback((linenoiseHintsCallback*) &esp_console_get_hint);

    /* Set command history size */
    linenoiseHistorySetMaxLen(100);
}

开发者ID:bullestock，项目名称:chairbot，代码行数:52，代码来源:console.cpp

示例17: app_main

void app_main()
{
    // Initialize NVS.
    esp_err_t err = nvs_flash_init();
    if (err == ESP_ERR_NVS_NO_FREE_PAGES) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        err = nvs_flash_init();
    }
    ESP_ERROR_CHECK( err );

    initialise_wifi();
    xTaskCreate(&aws_iot_task, "aws_iot_task", 9216, NULL, 5, NULL);
}

开发者ID:espressif，项目名称:ESP8266_RTOS_SDK，代码行数:13，代码来源:subscribe_publish_sample.c

示例18: app_main

int app_main(void)
{
    nvs_flash_init();
    system_init();
    tcpip_adapter_init();
    ESP_ERROR_CHECK( esp_event_loop_init(event_handler, NULL) );
    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
    ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
    ESP_ERROR_CHECK( esp_wifi_set_storage(WIFI_STORAGE_RAM) );
    ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
    I2CScanner();
    return 0;
}

开发者ID:EdWeller，项目名称:esp32-snippets，代码行数:13，代码来源:main.c

示例19: app_main

void app_main()
{
    esp_err_t err = nvs_flash_init();
    if (err == ESP_ERR_NVS_NO_FREE_PAGES) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        err = nvs_flash_init();
    }
    ESP_ERROR_CHECK( err );

    initialise_wifi();
    /* Temporarily pin task to core, due to FPU uncertainty */
    xTaskCreatePinnedToCore(&aws_iot_task, "aws_iot_task", 16384+1024, NULL, 5, NULL, 1);
}

开发者ID:danathughes，项目名称:esp-idf，代码行数:13，代码来源:thing_shadow_sample.c

示例20: bootWiFi

/**
 * Main entry into bootWiFi
 */
void bootWiFi(bootwifi_callback_t callback) {
	ESP_LOGD(tag, ">> bootWiFi");
	g_callback = callback;
	nvs_flash_init();
	tcpip_adapter_init();
	ESP_ERROR_CHECK(esp_event_loop_init(esp32_wifi_eventHandler, NULL));
	wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
	ESP_ERROR_CHECK(esp_wifi_init(&cfg));
	ESP_ERROR_CHECK(esp_wifi_set_storage(WIFI_STORAGE_RAM));

	bootWiFi2();

	ESP_LOGD(tag, "<< bootWiFi");
} // bootWiFi

开发者ID:EdWeller，项目名称:esp32-snippets，代码行数:17，代码来源:bootwifi.c

注：本文中的ESP_ERROR_CHECK函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ESP_LOGD函数代码示例发布时间：2022-05-30

C++ ESL_EXCEPTION函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19165|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ ESP_ERROR_CHECK函数代码示例

示例1: wifi_init_softap

示例2: sc_callback

示例3: app_main

示例4: event_handler

示例5: app_main

示例6: wifi_cmd_sta_join

示例7: setup_gpios

示例8: test_spi_task

示例9: saveConnectionInfo

示例10: initialise_wifi

示例11: scan_task

示例12: assert

示例13: initI2C

示例14: app_main

示例15: app_main

示例16: initialize_console

示例17: app_main

示例18: app_main

示例19: app_main

示例20: bootWiFi

请发表评论

全部评论

上一篇：

下一篇：

开馄饨加盟店要提前做好哪些工作？

solegalli/feature-selection-for-machine-

PHP(TP5)获取微信小程序unionId

win7系统重装系统初始设置的操作方法

Piiloblondie/MATSuMoTo: MATLAB Surrogate

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053