C++ ESIModel函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ESIModel函数的典型用法代码示例。如果您正苦于以下问题：C++ ESIModel函数的具体用法？C++ ESIModel怎么用？C++ ESIModel使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ESIModel函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: drawDeformedGeometry

void LIBeam3dNL :: drawDeformedGeometry(oofegGraphicContext &gc, UnknownType type)
{
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    TimeStep *tStep = domain->giveEngngModel()->giveCurrentStep();
    double defScale = gc.getDefScale();
    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* poin */
    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale);

    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale);
    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:26，代码来源:libeam3dnl.C

示例2: drawRawGeometry

void
TR_SHELL01 :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep)
{
    WCRec p [ 3 ];
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( this->giveMaterial()->isActivated(tStep) ) {
        EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
        EASValsSetColor( gc.getElementColor() );
        EASValsSetEdgeColor( gc.getElementEdgeColor() );
        EASValsSetEdgeFlag(true);
        EASValsSetFillStyle(FILL_SOLID);
        EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1);
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2);
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(3);
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1);
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2);
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(3);
        p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1);
        p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2);
        p [ 2 ].z = ( FPNum ) this->giveNode(3)->giveCoordinate(3);

        go =  CreateTriangle3D(p);
        EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
        EGAttachObject(go, ( EObjectP ) this);
        EMAddGraphicsToModel(ESIModel(), go);
    }
}

开发者ID:pcmagic，项目名称:oofem，代码行数:33，代码来源:tr_shell01.C

示例3: drawRawCrossSections

void
Lattice2d :: drawRawCrossSections(oofegGraphicContext &gc, TimeStep *tStep)
{
    GraphicObj *go;

    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* poin */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getCrossSectionColor() );
    EASValsSetLayer(OOFEG_RAW_CROSSSECTION_LAYER);

    FloatArray coords;
    this->giveCrossSectionCoordinates(coords);

    p [ 0 ].x = ( FPNum ) coords.at(1);
    p [ 0 ].y = ( FPNum ) coords.at(2);
    p [ 0 ].z = ( FPNum ) coords.at(3);
    p [ 1 ].x = ( FPNum ) coords.at(4);
    p [ 1 ].y = ( FPNum ) coords.at(5);
    p [ 1 ].z = ( FPNum ) coords.at(6);

    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:vivianyw，项目名称:oofem，代码行数:30，代码来源:lattice2d.C

示例4: drawRawGeometry

void
Lattice2d :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep)
{
    GraphicObj *go;

    WCRec p [ 2 ]; /* points */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);

    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2);
    p [ 0 ].z = 0.;
    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2);
    p [ 1 ].z = 0.;

    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:vivianyw，项目名称:oofem，代码行数:26，代码来源:lattice2d.C

示例5: drawDeformedGeometry

void QTrPlaneStrain :: drawDeformedGeometry(oofegGraphicContext &gc, UnknownType type)
{
    WCRec p [ 3 ];
    GraphicObj *go;
    TimeStep *tStep = domain->giveEngngModel()->giveCurrentStep();
    double defScale = gc.getDefScale();

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].z = 0.;
    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].z = 0.;
    p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 2 ].z = 0.;

    go =  CreateTriangle3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:30，代码来源:qtrplanestrain.C

示例6: drawRawGeometry

void QTrPlaneStrain :: drawRawGeometry(oofegGraphicContext &gc)
{
    WCRec p [ 3 ];
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2);
    p [ 0 ].z = 0.;
    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2);
    p [ 1 ].z = 0.;
    p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1);
    p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2);
    p [ 2 ].z = 0.;

    go =  CreateTriangle3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:29，代码来源:qtrplanestrain.C

示例7: drawDeformedGeometry

void LSpace :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    int i;
    WCRec p [ 8 ];
    GraphicObj *go;
    double defScale = gc.getDefScale();

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
    EASValsSetFillStyle(FILL_SOLID);
    for ( i = 0; i < 8; i++ ) {
        p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(3, tStep, defScale);
    }

    go =  CreateHexahedron(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:rreissnerr，项目名称:oofem，代码行数:27，代码来源:lspace.C

示例8: drawDeformedGeometry

void IntElPoint :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    GraphicObj *go;
    //  if (!go) { // create new one
    WCRec p [ 1 ]; /* poin */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    double defScale = gc.getDefScale();

    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale) +
                                 this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale) );
    p [ 0 ].y = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale) +
                                 this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale) );
    p [ 0 ].z = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(3, tStep, defScale) +
                                 this->giveNode(2)->giveUpdatedCoordinate(3, tStep, defScale) );

    EASValsSetMType(CIRCLE_MARKER);
    go = CreateMarker3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:erisve，项目名称:oofem，代码行数:26，代码来源:intelpoint.C

示例9: drawRawGeometry

void Brick1_ht :: drawRawGeometry(oofegGraphicContext &gc)
{
    WCRec p [ 8 ];
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    EASValsSetFillStyle(FILL_SOLID);
    for ( int i = 0; i < 8; i++ ) {
        p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1);
        p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2);
        p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3);
    }

    go =  CreateHexahedron(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:JimBrouzoulis，项目名称:OOFEM_LargeDef，代码行数:26，代码来源:brick1_ht.C

示例10: drawDeformedGeometry

void
TR_SHELL01 :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    WCRec p [ 3 ];
    GraphicObj *go;
    double defScale = gc.getDefScale();

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( this->giveMaterial()->isActivated(tStep) ) {
        EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
        EASValsSetColor( gc.getDeformedElementColor() );
        EASValsSetEdgeColor( gc.getElementEdgeColor() );
        EASValsSetEdgeFlag(true);
        EASValsSetFillStyle(FILL_SOLID);
        EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(3, tStep, defScale);
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(3, tStep, defScale);
        p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ 2 ].z = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(3, tStep, defScale);

        go =  CreateTriangle3D(p);
        EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
        EMAddGraphicsToModel(ESIModel(), go);
    }
}

开发者ID:pcmagic，项目名称:oofem，代码行数:33，代码来源:tr_shell01.C

示例11: drawDeformedGeometry

void
Lattice2d :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    double defScale = gc.getDefScale();

    WCRec p [ 2 ]; /* poin */
    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);

    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 0 ].z = 0.;

    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 1 ].z = 0.;

    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:vivianyw，项目名称:oofem，代码行数:28，代码来源:lattice2d.C

示例12: drawScalar

void InterfaceElem1d :: drawScalar(oofegGraphicContext &context)
{
    int i, indx, result = 0;
    GaussPoint *gp;
    IntegrationRule *iRule = integrationRulesArray [ giveDefaultIntegrationRule() ];
    TimeStep *tStep = this->giveDomain()->giveEngngModel()->giveCurrentStep();
    FloatArray gcoord(3), v1;
    WCRec p [ 1 ];
    IntArray map;
    GraphicObj *go;
    double val [ 1 ];

    if ( !context.testElementGraphicActivity(this) ) {
        return;
    }

    if ( context.getInternalVarsDefGeoFlag() ) {
        double defScale = context.getDefScale();
        p [ 0 ].x = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale) );
        p [ 0 ].y = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale) );
        p [ 0 ].z = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale) );
    } else {
        p [ 0 ].x = ( FPNum )( this->giveNode(1)->giveCoordinate(1) );
        p [ 0 ].y = ( FPNum )( this->giveNode(1)->giveCoordinate(2) );
        p [ 0 ].z = ( FPNum )( this->giveNode(1)->giveCoordinate(3) );
    }

    result += giveIPValue(v1, iRule->getIntegrationPoint(0), context.giveIntVarType(), tStep);


    for ( i = 0; i < iRule->getNumberOfIntegrationPoints(); i++ ) {
        result = 0;
        gp  = iRule->getIntegrationPoint(i);
        result += giveIPValue(v1, gp, context.giveIntVarType(), tStep);
        result += this->giveIntVarCompFullIndx( map, context.giveIntVarType() );
        if ( result != 2 ) {
            continue;
        }

        if ( ( indx = map.at( context.giveIntVarIndx() ) ) == 0 ) {
            return;
        }

        val [ 0 ] = v1.at(indx);
        context.updateFringeTableMinMax(val, 1);

        EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
        EASValsSetMType(FILLED_CIRCLE_MARKER);
        go = CreateMarkerWD3D(p, val [ 0 ]);
        EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go);
        EMAddGraphicsToModel(ESIModel(), go);
        //}
    }
}

开发者ID:MartinFagerstrom，项目名称:oofem，代码行数:57，代码来源:interfaceelement1d.C

示例13: drawScalar

void LSpace :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep)
{
    int i, indx, result = 0;
    WCRec p [ 8 ];
    GraphicObj *tr;
    FloatArray v [ 8 ];
    double s [ 8 ], defScale = 0.0;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( gc.giveIntVarMode() == ISM_recovered ) {
        for ( i = 1; i <= 8; i++ ) {
            result += this->giveInternalStateAtNode(v [ i - 1 ], gc.giveIntVarType(), gc.giveIntVarMode(), i, tStep);
        }

        if ( result != 8 ) {
            return;
        }
    } else if ( gc.giveIntVarMode() == ISM_local ) {
        return;
    }

    indx = gc.giveIntVarIndx();

    for ( i = 1; i <= 8; i++ ) {
        s [ i - 1 ] = v [ i - 1 ].at(indx);
    }

    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
    if ( gc.getScalarAlgo() == SA_ISO_SURF ) {
        for ( i = 0; i < 8; i++ ) {
            if ( gc.getInternalVarsDefGeoFlag() ) {
                // use deformed geometry
                defScale = gc.getDefScale();
                p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale);
                p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale);
                p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(3, tStep, defScale);
            } else {
                p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1);
                p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2);
                p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3);
            }
        }

        gc.updateFringeTableMinMax(s, 8);
        tr = CreateHexahedronWD(p, s);
        EGWithMaskChangeAttributes(LAYER_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK, tr);
        EMAddGraphicsToModel(ESIModel(), tr);
    }
}

开发者ID:rreissnerr，项目名称:oofem，代码行数:54，代码来源:lspace.C

示例14: drawScalar

void IntElPoint :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep)
{
    int indx, result = 0;
    IntegrationRule *iRule = this->giveDefaultIntegrationRulePtr();
    FloatArray gcoord(3), v1;
    WCRec p [ 1 ];
    GraphicObj *go;
    double val [ 1 ];

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( gc.getInternalVarsDefGeoFlag() ) {
        double defScale = gc.getDefScale();
        p [ 0 ].x = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale) );
        p [ 0 ].y = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale) );
        p [ 0 ].z = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(3, tStep,  defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(3, tStep, defScale) );
    } else {
        p [ 0 ].x = ( FPNum ) ( this->giveNode(1)->giveCoordinate(1) );
        p [ 0 ].y = ( FPNum ) ( this->giveNode(1)->giveCoordinate(2) );
        p [ 0 ].z = ( FPNum ) ( this->giveNode(1)->giveCoordinate(3) );
    }

    result += giveIPValue(v1, iRule->getIntegrationPoint(0), gc.giveIntVarType(), tStep);


    for ( GaussPoint *gp: *iRule ) {
        result = 0;
        result += giveIPValue(v1, gp, gc.giveIntVarType(), tStep);
        if ( result != 1 ) {
            continue;
        }

        indx = gc.giveIntVarIndx();

        val [ 0 ] = v1.at(indx);
        gc.updateFringeTableMinMax(val, 1);

        EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
        EASValsSetMType(FILLED_CIRCLE_MARKER);
        go = CreateMarkerWD3D(p, val [ 0 ]);
        EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go);
        EMAddGraphicsToModel(ESIModel(), go);
        //}
    }
}

开发者ID:erisve，项目名称:oofem，代码行数:50，代码来源:intelpoint.C

示例15: drawSpecial

void
Lattice2d :: drawSpecial(oofegGraphicContext &gc, TimeStep *tStep)
{
    WCRec p [ 2 ];
    GraphicObj *tr;
    GaussPoint *gp;
    FloatArray crackStatuses, cf;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( gc.giveIntVarType() == IST_CrackState ) {
        gp = integrationRulesArray [ 0 ]->getIntegrationPoint(0);
        this->giveIPValue(crackStatuses, gp, IST_CrackStatuses, tStep);
        if ( crackStatuses(0) == 1. || crackStatuses(0) == 2. || crackStatuses(0) == 3 || crackStatuses(0) == 4 ) {
	  FloatArray coords;
	  this->giveCrossSectionCoordinates(coords);

	    p [ 0 ].x = ( FPNum ) coords.at(1);
	    p [ 0 ].y = ( FPNum ) coords.at(2);
	    p [ 0 ].z = ( FPNum ) coords.at(3);
	    p [ 1 ].x = ( FPNum ) coords.at(4);
	    p [ 1 ].y = ( FPNum ) coords.at(5);
	    p [ 1 ].z = ( FPNum ) coords.at(6);


            EASValsSetLayer(OOFEG_CRACK_PATTERN_LAYER);
            EASValsSetLineWidth(OOFEG_CRACK_PATTERN_WIDTH);
            if ( ( crackStatuses(0) == 1. ) ) {
                EASValsSetColor( gc.getActiveCrackColor() );
            } else if ( crackStatuses(0) == 2. ) {
                EASValsSetColor( gc.getCrackPatternColor() );
            } else if ( crackStatuses(0) == 3. ) {
                EASValsSetColor( gc.getActiveCrackColor() );
            } else if ( crackStatuses(0) == 4. ) {
                EASValsSetColor( gc.getActiveCrackColor() );
            }


            tr = CreateLine3D(p);
            EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, tr);
	    EGAttachObject(tr, ( EObjectP ) this);
            EMAddGraphicsToModel(ESIModel(), tr);
        }
    }
}

开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:47，代码来源:lattice2d.C

示例16: drawScalar

void Brick1_ht :: drawScalar(oofegGraphicContext &context)
{
    int indx, result = 0;
    WCRec p [ 8 ];
    GraphicObj *tr;
    TimeStep *tStep = this->giveDomain()->giveEngngModel()->giveCurrentStep();
    FloatArray v [ 8 ];
    double s [ 8 ];

    if ( !context.testElementGraphicActivity(this) ) {
        return;
    }

    if ( context.giveIntVarMode() == ISM_recovered ) {
        for ( int i = 1; i <= 8; i++ ) {
            result += this->giveInternalStateAtNode(v [ i - 1 ], context.giveIntVarType(), context.giveIntVarMode(), i, tStep);
        }

        if ( result != 8 ) {
            return;
        }
    } else if ( context.giveIntVarMode() == ISM_local ) {
        return;
    }

    indx = context.giveIntVarIndx();

    for ( int i = 1; i <= 8; i++ ) {
        s [ i - 1 ] = v [ i - 1 ].at(indx);
    }

    EASValsSetEdgeColor( context.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
    if ( context.getScalarAlgo() == SA_ISO_SURF ) {
        for ( int i = 0; i < 8; i++ ) {
            p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1);
            p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2);
            p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3);
        }

        context.updateFringeTableMinMax(s, 8);
        tr = CreateHexahedronWD(p, s);
        EGWithMaskChangeAttributes(LAYER_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK, tr);
        EMAddGraphicsToModel(ESIModel(), tr);
    }
}

开发者ID:JimBrouzoulis，项目名称:OOFEM_LargeDef，代码行数:47，代码来源:brick1_ht.C

示例17: drawScalar

void
Tetrah1_ht :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep)
{
    int i, indx, result = 0;
    WCRec p [ 4 ];
    GraphicObj *tr;
    FloatArray v [ 4 ];
    double s [ 4 ];

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( gc.giveIntVarMode() == ISM_recovered ) {
        for ( i = 1; i <= 4; i++ ) {
            result += this->giveInternalStateAtNode(v [ i - 1 ], gc.giveIntVarType(), gc.giveIntVarMode(), i, tStep);
        }

        if ( result != 4 ) {
            return;
        }
    } else if ( gc.giveIntVarMode() == ISM_local ) {
        return;
    }

    indx = gc.giveIntVarIndx();

    for ( i = 1; i <= 4; i++ ) {
        s [ i - 1 ] = v [ i - 1 ].at(indx);
    }

    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
    if ( gc.getScalarAlgo() == SA_ISO_SURF ) {
        for ( i = 0; i < 4; i++ ) {
            p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1);
            p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2);
            p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3);
        }

        gc.updateFringeTableMinMax(s, 4);
        tr = CreateTetraWD(p, s);
        EGWithMaskChangeAttributes(LAYER_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK, tr);
        EMAddGraphicsToModel(ESIModel(), tr);
    }
}

开发者ID:vivianyw，项目名称:oofem，代码行数:47，代码来源:tetrah1_ht.C

示例18: drawScalar

void IntElLine2 :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep)
{
    int indx, result = 0;
    IntegrationRule *iRule = this->giveDefaultIntegrationRulePtr();
    FloatArray gcoord(3), v1;
    WCRec p [ 1 ];
    GraphicObj *go;
    double val [ 1 ];

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( gc.giveIntVarMode() == ISM_recovered ) {
        return;
    }

    for ( GaussPoint *gp: *iRule ) {
        result = 0;
        result += giveIPValue(v1, gp, gc.giveIntVarType(), tStep);
        if ( result != 1 ) {
            continue;
        }

        indx = gc.giveIntVarIndx();

        result += this->computeGlobalCoordinates( gcoord, gp->giveNaturalCoordinates() );

        p [ 0 ].x = ( FPNum ) gcoord.at(1);
        p [ 0 ].y = ( FPNum ) gcoord.at(2);
        p [ 0 ].z = 0.;

        val [ 0 ] = v1.at(indx);
        gc.updateFringeTableMinMax(val, 1);
        //if (val[0] > 0.) {

        EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
        EASValsSetMType(FILLED_CIRCLE_MARKER);
        go = CreateMarkerWD3D(p, val [ 0 ]);
        EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go);
        EMAddGraphicsToModel(ESIModel(), go);
        //}
    }
}

开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:44，代码来源:intelline2.C

示例19: drawRawGeometry

void CohesiveSurface3d :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep)
{
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    //WCRec p[4];
    GraphicObj *go;

    Particle *nodeA = ( Particle * ) this->giveNode(1);
    Particle *nodeB = ( Particle * ) this->giveNode(2);
    //double rA = nodeA -> giveRadius();
    //double rB = nodeB -> giveRadius();
    //double r = (rA+rB)/4.;

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);

    WCRec pl [ 2 ];
    // determine coordinates of the particles connected by this element
    pl [ 0 ].x = ( FPNum ) nodeA->giveCoordinate(1);
    pl [ 0 ].y = ( FPNum ) nodeA->giveCoordinate(2);
    pl [ 0 ].z = ( FPNum ) nodeA->giveCoordinate(3);
    pl [ 1 ].x = ( FPNum ) nodeB->giveCoordinate(1);
    pl [ 1 ].y = ( FPNum ) nodeB->giveCoordinate(2);
    pl [ 1 ].z = ( FPNum ) nodeB->giveCoordinate(3);
    if ( giveNumberOfNodes() == 3 ) {
        // the second particle should be shifted (periodic arrangement)
        Particle *nodeC = ( Particle * ) this->giveNode(3);
        pl [ 1 ].x += kx * ( nodeC->giveCoordinate(1) );
        pl [ 1 ].y += ky * ( nodeC->giveCoordinate(2) );
        pl [ 1 ].z += kz * ( nodeC->giveCoordinate(3) );
    }

    //  plot a line segment connecting the particles
    go = CreateLine3D(pl);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:43，代码来源:cohsur3d.C

示例20: drawRawGeometry

void Truss2d :: drawRawGeometry(oofegGraphicContext &gc)
{
    int c1, c2;
    resolveCoordIndices(c1, c2);

    GraphicObj *go;
    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* point */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    if ( cs_mode == 0 ) {
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(c1);
        p [ 0 ].y = 0.;
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(c2);
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(c1);
        p [ 1 ].y = 0.;
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(c2);
    } else if ( cs_mode == 1 ) {
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(c1);
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(c2);
        p [ 0 ].z = 0.;
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(c1);
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(c2);
        p [ 1 ].z = 0.;
    } else if ( cs_mode == 2 ) {
        p [ 0 ].x = 0.;
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(c1);
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(c2);
        p [ 1 ].x = 0.;
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(c1);
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(c2);
    }

    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}

开发者ID:MartinFagerstrom，项目名称:oofem，代码行数:43，代码来源:truss2d.C

注：本文中的ESIModel函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ESL_ALLOC函数代码示例发布时间：2022-05-30

C++ ESIF_TRACE_DEBUG函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19165|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ ESIModel函数代码示例

示例1: drawDeformedGeometry

示例2: drawRawGeometry

示例3: drawRawCrossSections

示例4: drawRawGeometry

示例5: drawDeformedGeometry

示例6: drawRawGeometry

示例7: drawDeformedGeometry

示例8: drawDeformedGeometry

示例9: drawRawGeometry

示例10: drawDeformedGeometry

示例11: drawDeformedGeometry

示例12: drawScalar

示例13: drawScalar

示例14: drawScalar

示例15: drawSpecial

示例16: drawScalar

示例17: drawScalar

示例18: drawScalar

示例19: drawRawGeometry

示例20: drawRawGeometry

请发表评论

全部评论

上一篇：

下一篇：

开馄饨加盟店要提前做好哪些工作？

solegalli/feature-selection-for-machine-

PHP(TP5)获取微信小程序unionId

win7系统重装系统初始设置的操作方法

Piiloblondie/MATSuMoTo: MATLAB Surrogate

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053