本文整理汇总了C++中ERR_MSG函数的典型用法代码示例。如果您正苦于以下问题：C++ ERR_MSG函数的具体用法？C++ ERR_MSG怎么用？C++ ERR_MSG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ERR_MSG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: main
int main(void)
{
sigset_t pendingset;
struct sigaction act;
act.sa_handler = myhandler;
act.sa_flags = 0;
sigemptyset(&act.sa_mask);
int rc;
rc = sigaction(SIGCHLD, &act, 0);
if (rc) {
ERR_MSG("sigaction()", rc);
return PTS_UNRESOLVED;
}
if (sigset(SIGCHLD, SIG_HOLD) == SIG_ERR) {
perror("Unexpected error while using sigset()");
return PTS_UNRESOLVED;
}
raise(SIGCHLD);
rc = sigpending(&pendingset);
if (rc) {
ERR_MSG("sigpending()", rc);
return PTS_UNRESOLVED;
}
if (sigismember(&pendingset, SIGCHLD) != 1) {
printf("Test FAILED: Signal SIGCHLD wasn't hold.\n");
return PTS_FAIL;
}
printf("Test PASSED\n");
return PTS_PASS;
}
开发者ID:kraj，项目名称:ltp，代码行数:36，代码来源:6-1.c
示例2: bma150_read_reg
// ************************************************************************
// Gsensor Code -- BMA150
// ************************************************************************
static int bma150_read_reg(struct i2c_client *clnt, unsigned char reg, unsigned char *data, unsigned char count)
{
unsigned char tmp[10];
if (10 < count)
return -1;
tmp[0] = reg;
if (bma150_i2c_tx(tmp, 1) < 0)
{
ERR_MSG("Set REGISTER address error");
return -EIO;
}
if (bma150_i2c_rx(tmp, count) < 0)
{
ERR_MSG("Read REGISTER content error");
return -EIO;
}
strncpy(data, tmp, count);
return 0;
}
开发者ID:Austrie，项目名称:SpeedDemon-Kernel，代码行数:27，代码来源:bma150.c
示例3: G_THROW
void
JB2Dict::JB2Codec::Encode::code(const GP<JB2Dict> &gjim)
{
if(!gjim)
{
G_THROW( ERR_MSG("JB2Image.bad_number") );
}
JB2Dict &jim=*gjim;
// -------------------------
// THIS IS THE ENCODING PART
// -------------------------
int firstshape = jim.get_inherited_shape_count();
int nshape = jim.get_shape_count();
init_library(jim);
// Code headers.
int rectype = REQUIRED_DICT_OR_RESET;
if (jim.get_inherited_shape_count() > 0)
code_record(rectype, gjim, 0);
rectype = START_OF_DATA;
code_record(rectype, gjim, 0);
// Code Comment.
rectype = PRESERVED_COMMENT;
if (!! jim.comment)
code_record(rectype, gjim, 0);
// Encode every shape
int shapeno;
DJVU_PROGRESS_TASK(jb2code,"jb2 encode", nshape-firstshape);
for (shapeno=firstshape; shapeno<nshape; shapeno++)
{
DJVU_PROGRESS_RUN(jb2code, (shapeno-firstshape)|0xff);
// Code shape
JB2Shape &jshp = jim.get_shape(shapeno);
rectype=(jshp.parent >= 0)
?MATCHED_REFINE_LIBRARY_ONLY:NEW_MARK_LIBRARY_ONLY;
code_record(rectype, gjim, &jshp);
add_library(shapeno, jshp);
// Check numcoder status
if (cur_ncell > CELLCHUNK)
{
rectype = REQUIRED_DICT_OR_RESET;
code_record(rectype, 0, 0);
}
}
// Code end of data record
rectype = END_OF_DATA;
code_record(rectype, gjim, 0);
gzp=0;
}
开发者ID:OpenInkpot-archive，项目名称:iplinux-djvulibre，代码行数:48，代码来源:JB2EncodeCodec.cpp
示例4: formRadvd
void formRadvd(request *wp, char *path, char *query)
{
int pid;
char tmpBuf[256];
char *submitUrl;
char* value;
radvdCfgParam_t radvdCfgParam;
/*Get parameters*/
getRadvdInfo(&radvdCfgParam);
/*Set parameters*/
value=req_get_cstream_var(wp,"submit","");
if(0 == strcmp(value,"Save"))
{
set_RadvdParam(wp, path, query,&radvdCfgParam);
}
/*Set to pMIb*/
apmib_set(MIB_IPV6_RADVD_PARAM,&radvdCfgParam);
/*Update it to flash*/
setOk_radvd:
apmib_update(CURRENT_SETTING);
/*create the config file*/
create_RadvdCfgFile(&radvdCfgParam);
/*start the Daemon*/
#ifndef NO_ACTION
pid = fork();
if (pid) {
waitpid(pid, NULL, 0);
}
else if (pid == 0) {
snprintf(tmpBuf, 100, "%s/%s", _CONFIG_SCRIPT_PATH, _IPV6_RADVD_SCRIPT_PROG);
execl( tmpBuf, _IPV6_RADVD_SCRIPT_PROG, NULL);
exit(1);
}
#endif
submitUrl = req_get_cstream_var(wp, "submit-url", ""); // hidden page
OK_MSG(submitUrl);
return;
setErr_radvd:
ERR_MSG(tmpBuf);
return;
}
开发者ID:jameshilliard，项目名称:WECB-BH-GPL，代码行数:48，代码来源:fmipv6.c
示例5: do_transition
static int do_transition(struct state_t* state,void* input)
{
struct transition_t* p;
p = state->trans;
while( p ){
if( p->event.happend(input) ){
state->owner->cur_state = p->next_state;
state->prev = state;
DEBUG_MSG("will transition to another state\n");
return 0;
}
p = p->_next;
}
ERR_MSG("no target to transition to\n");
return -1;
}
开发者ID:wowk，项目名称:wowk-state-machine，代码行数:16，代码来源:state-machine.c
示例6: if
const JB2Shape &
JB2Dict::get_shape(const int shapeno) const
{
const JB2Shape *retval;
if(shapeno >= inherited_shapes)
{
retval=&shapes[shapeno - inherited_shapes];
}else if(inherited_dict)
{
retval=&(inherited_dict->get_shape(shapeno));
}else
{
G_THROW( ERR_MSG("JB2Image.bad_number") );
}
return *retval;
}
开发者ID:serghei，项目名称:kde3-kdegraphics，代码行数:16，代码来源:JB2Image.cpp
示例7: GetCurrentThreadId
void
GMonitor::broadcast()
{
if (ok)
{
DWORD self = GetCurrentThreadId();
if (count>0 || self!=locker)
G_THROW( ERR_MSG("GThreads.not_acq_broad") );
for (struct thr_waiting *w=head; w; w=w->next)
if (w->waiting)
{
SetEvent(w->gwait);
w->waiting = FALSE;
}
}
}
开发者ID:371816210，项目名称:ebookdroid-1，代码行数:16，代码来源:GThreads.cpp
示例8: pthread_self
void
GMonitor::leave()
{
static pthread_t pthread_null;
pthread_t self = pthread_self();
if (ok && (count>0 || !pthread_equal(locker, self)))
G_THROW( ERR_MSG("GThreads.not_acq_broad") );
count += 1;
if (count > 0)
{
count = 1;
locker = pthread_null;
if (ok)
pthread_mutex_unlock(&mutex);
}
}
开发者ID:371816210，项目名称:ebookdroid-1，代码行数:16，代码来源:GThreads.cpp
示例9: fsm_release
int fsm_release(struct state_machine_t** fsm)
{
if( !fsm || !(*fsm) ){
return 0;
}
if( (*fsm)->isrunning ){
ERR_MSG("the state machine is still running\n");
return -1;
}
free(*fsm);
*fsm = NULL;
return 0;
}
开发者ID:wowk，项目名称:wowk-state-machine，代码行数:16，代码来源:state-machine.c
示例10: test_1
/**
* Test 1 - Installation d'un driver
* Description
* Installer le driver alors qu'il n'est pas installé
* Resultat attendu
* La valeur de retour doit être positive, et correspond au numéro du driver. Il doit être possible
* de le retrouver en utilisant la fonction iosDrvShow.
**/
int test_1()
{
int success = 0;
if(pe_driverInstall(10) >= 0)
{
success++;
iosDrvShow();
getchar();
// Call this to clean the system.
}
else
{
ERR_MSG(1);
}
pe_driverUninstall();
return success;
}
开发者ID:boysb25，项目名称:VxWorks-Driver，代码行数:25，代码来源:unittestl.c
示例11: G_THROW
void
DjVuTXT::encode(const GP<ByteStream> &gbs) const
{
ByteStream &bs=*gbs;
if (! textUTF8 )
G_THROW( ERR_MSG("DjVuText.no_text") );
// Encode text
int textsize = textUTF8.length();
bs.write24( textsize );
bs.writall( (void*)(const char*)textUTF8, textsize );
// Encode zones
if (has_valid_zones())
{
bs.write8(Zone::version);
page_zone.encode(gbs);
}
}
开发者ID:smyts，项目名称:tengwa-djvu，代码行数:17，代码来源:DjVuText.cpp
示例12: DEBUG_MSG
void
GIFFManager::load_file(GP<ByteStream> str)
{
DEBUG_MSG("GIFFManager::load_file(): Loading IFF file.\n");
DEBUG_MAKE_INDENT(3);
GP<IFFByteStream> gistr=IFFByteStream::create(str);
IFFByteStream &istr=*gistr;
GUTF8String chunk_id;
if (istr.get_chunk(chunk_id))
{
if (chunk_id.substr(0,5) != "FORM:")
G_THROW( ERR_MSG("GIFFManager.cant_find2") );
set_name(chunk_id);
load_chunk(istr, top_level);
istr.close_chunk();
}
}
开发者ID:OpenInkpot-archive，项目名称:iplinux-djvulibre，代码行数:18，代码来源:GIFFManager.cpp
示例13: G_THROW
void
GBitmap::compress()
{
if (grays > 2)
G_THROW( ERR_MSG("GBitmap.cant_compress") );
GMonitorLock lock(monitor());
if (bytes)
{
grle.resize(0);
grlerows.resize(0);
rlelength = encode(rle,grle);
if (rlelength)
{
gbytes_data.resize(0);
bytes = 0;
}
}
}
开发者ID:acmepjz，项目名称:djvulibre，代码行数:18，代码来源:GBitmap.cpp
示例14: G_THROW
DjVuProgressTask::~DjVuProgressTask()
{
if (data && data->callback)
{
if (data->head != this)
G_THROW( ERR_MSG("DjVuGlobal.not_compatible") );
data->head = parent;
if (!parent)
{
unsigned long curdate = GOS::ticks();
if((*(data->callback))(data->gtask?data->gtask:"",curdate-startdate, curdate-startdate))
{
G_THROW("INTERRUPT");
}
}
}
delete (GP<Data> *)gdata;
}
开发者ID:smyts，项目名称:tengwa-djvu，代码行数:18，代码来源:DjVuGlobal.cpp
示例15: fsm_init
int fsm_init(struct state_machine_t** fsm)
{
if( !fsm ){
ERR_MSG("invalid argument\n");
return -1;
}
*fsm = (struct state_machine_t*)calloc(1,sizeof(struct state_machine_t));
if( *fsm == NULL ){
STD_ERR_MSG("Cant allocate memory");
return -1;
}
(*fsm)->default_entered = default_entered_cb;
(*fsm)->default_exited = default_exited_cb;
return 0;
}
开发者ID:wowk，项目名称:wowk-state-machine，代码行数:18，代码来源:state-machine.c
示例16: convertToColor
static unsigned long
convertToColor(const GUTF8String &s)
{
unsigned long retval=0;
if(s.length())
{
int endpos;
if(s[0] == '#')
{
retval=s.substr(1,-1).toULong(0,endpos,16);
}
if(endpos < 0)
{
G_THROW( (ERR_MSG("XMLAnno.bad_color") "\t")+s );
}
}
return retval;
}
开发者ID:smyts，项目名称:tengwa-djvu，代码行数:18，代码来源:XMLParser.cpp
示例17: bma150_early_suspend_func
static void bma150_early_suspend_func(struct early_suspend * h)
{
//Div6D1-OH-ECompass-EarlySuspend_To_Suspend-00*{
#ifndef USE_SUSPEND
INF_MSG("START");
if (atomic_read(&dev_opened) > 0)
{
if (enter_mode(BMA150_MODE_SLEEP))
{
ERR_MSG("Gsensor Enter sleep mode fail");
}
}
atomic_inc(&is_early_suspend);
#else
#endif
//Div6D1-OH-ECompass-EarlySuspend_To_Suspend-00*}
}
开发者ID:Austrie，项目名称:SpeedDemon-Kernel，代码行数:19，代码来源:bma150.c
示例18: LimitSwitch_Pressed
bool LimitSwitch_Pressed(uint8_t sw)
{
uint8_t val;
switch(sw) {
case LimitSwitch_XMin:
val = GPIO_ReadInputDataBit(X_Axis_Min_Port, X_Axis_Min_Pin);
break;
case LimitSwitch_YMin:
val = GPIO_ReadInputDataBit(Y_Axis_Min_Port, Y_Axis_Min_Pin);
break;
case LimitSwitch_ZMin:
val = GPIO_ReadInputDataBit(Z_Axis_Min_Port, Z_Axis_Min_Pin);
break;
default:
ERR_MSG("Invalid switch number %d", sw);
return false;
}
return !val;
}
开发者ID:jackeyjiang，项目名称:3DPrinter-firmware，代码行数:19，代码来源:limitSwitch.c
示例19: G_THROW
GP<GBitmap>
JB2Image::get_bitmap(int subsample, int align) const
{
if (width==0 || height==0)
G_THROW( ERR_MSG("JB2Image.cant_create") );
int swidth = (width + subsample - 1) / subsample;
int sheight = (height + subsample - 1) / subsample;
int border = ((swidth + align - 1) & ~(align - 1)) - swidth;
GP<GBitmap> bm = GBitmap::create(sheight, swidth, border);
bm->set_grays(1+subsample*subsample);
for (int blitno = 0; blitno < get_blit_count(); blitno++)
{
const JB2Blit *pblit = get_blit(blitno);
const JB2Shape &pshape = get_shape(pblit->shapeno);
if (pshape.bits)
bm->blit(pshape.bits, pblit->left, pblit->bottom, subsample);
}
return bm;
}
开发者ID:serghei，项目名称:kde3-kdegraphics，代码行数:19，代码来源:JB2Image.cpp
示例20: switch
void
MapArea::initBorder(void)
// Regenerates the boundary and refreshes border on the screen
{
switch(getBorderType())
{
case GMapArea::NO_BORDER:
case GMapArea::XOR_BORDER:
case GMapArea::SOLID_BORDER:
ma_generatePieces();
repaintBorder();
break;
case GMapArea::SHADOW_IN_BORDER:
for(int i=0;i<gmap_area->border_width;i++)
shadow_pattern[i]=-(100-100*(i+1)/gmap_area->border_width);
ma_generatePieces();
repaintBorder();
break;
case GMapArea::SHADOW_OUT_BORDER:
for(int i=0;i<gmap_area->border_width;i++)
shadow_pattern[i]=100-100*(i+1)/gmap_area->border_width;
ma_generatePieces();
repaintBorder();
break;
case GMapArea::SHADOW_EIN_BORDER:
for(int i=0;i<gmap_area->border_width;i++) shadow_pattern[i]=0;
shadow_pattern[0]=-100;
shadow_pattern[gmap_area->border_width-1]=100;
ma_generatePieces();
repaintBorder();
break;
case GMapArea::SHADOW_EOUT_BORDER:
for(int i=0;i<gmap_area->border_width;i++) shadow_pattern[i]=0;
shadow_pattern[0]=100;
shadow_pattern[gmap_area->border_width-1]=-100;
ma_generatePieces();
repaintBorder();
break;
default:
G_THROW(ERR_MSG("MapArea.unknown_border_type"));
}
}
开发者ID:OpenInkpot-archive，项目名称:iplinux-djvulibre，代码行数:42，代码来源:MapAreas.cpp
注：本文中的ERR_MSG函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论