本文整理汇总了C++中ENGINE_get_first函数的典型用法代码示例。如果您正苦于以下问题：C++ ENGINE_get_first函数的具体用法？C++ ENGINE_get_first怎么用？C++ ENGINE_get_first使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ENGINE_get_first函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ENGINE_register_all_RAND
void ENGINE_register_all_RAND ()
{
ENGINE *e;
for (e = ENGINE_get_first (); e; e = ENGINE_get_next (e))
ENGINE_register_RAND (e);
}
开发者ID:274914765，项目名称:C，代码行数:7，代码来源:tb_rand.c
示例2: ENGINE_register_all_ciphers
void ENGINE_register_all_ciphers()
{
ENGINE *e;
for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
ENGINE_register_ciphers(e);
}
开发者ID:AustinWise，项目名称:Netduino-Micro-Framework，代码行数:7，代码来源:tb_cipher.c
示例3: openssl_engine
int openssl_engine(lua_State *L)
{
const ENGINE* eng = NULL;
if (lua_isstring(L, 1))
{
const char* id = luaL_checkstring(L, 1);
eng = ENGINE_by_id(id);
}
else if (lua_isboolean(L, 1))
{
int first = lua_toboolean(L, 1);
if (first)
eng = ENGINE_get_first();
else
eng = ENGINE_get_last();
}
else
luaL_error(L,
"#1 may be string or boolean\n"
"\tstring for an engine id to load\n"
"\ttrue for first engine, false or last engine\n"
"\tbut we get %s:%s", lua_typename(L, lua_type(L, 1)), lua_tostring(L, 1));
if (eng)
{
PUSH_OBJECT((void*)eng, "openssl.engine");
}
else
lua_pushnil(L);
return 1;
}
开发者ID:sdgdsffdsfff，项目名称:lua-openssl，代码行数:30，代码来源:engine.c
示例4: ENGINE_register_all_pkey_asn1_meths
void ENGINE_register_all_pkey_asn1_meths(void)
{
ENGINE *e;
for (e = ENGINE_get_first(); e; e = ENGINE_get_next(e))
ENGINE_register_pkey_asn1_meths(e);
}
开发者ID:DarovskikhAndrei，项目名称:openssl，代码行数:7，代码来源:tb_asnmth.c
示例5: ENGINE_register_all_STORE
void ENGINE_register_all_STORE ()
{
ENGINE *e;
for (e = ENGINE_get_first (); e; e = ENGINE_get_next (e))
ENGINE_register_STORE (e);
}
开发者ID:274914765，项目名称:C，代码行数:7，代码来源:tb_store.c
示例6: ENGINE_register_all_complete
int ENGINE_register_all_complete(void)
{
ENGINE *e;
for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
ENGINE_register_complete(e);
return 1;
}
开发者ID:LucidOne，项目名称:Rovio，代码行数:8，代码来源:eng_fat.c
示例7: ENGINE_register_all_DH
void
ENGINE_register_all_DH(void)
{
ENGINE *e;
for (e = ENGINE_get_first(); e; e = ENGINE_get_next(e))
ENGINE_register_DH(e);
}
开发者ID:randombit，项目名称:hacrypto，代码行数:8，代码来源:tb_dh.c
示例8: defined
/* Return list of OpenSSL crypto engine names.
*/
struct curl_slist *Curl_ossl_engines_list(struct SessionHandle *data)
{
struct curl_slist *list = NULL;
#if defined(USE_SSLEAY) && defined(HAVE_OPENSSL_ENGINE_H)
ENGINE *e;
for (e = ENGINE_get_first(); e; e = ENGINE_get_next(e))
list = curl_slist_append(list, ENGINE_get_id(e));
#endif
(void) data;
return (list);
}
开发者ID:dangardner，项目名称:mudmagic-client，代码行数:14，代码来源:ssluse.c
示例9: ossl_engine_s_engines
static VALUE
ossl_engine_s_engines(VALUE klass, SEL sel)
{
ENGINE *e;
VALUE ary, obj;
ary = rb_ary_new();
for(e = ENGINE_get_first(); e; e = ENGINE_get_next(e)){
WrapEngine(klass, obj, e);
rb_ary_push(ary, obj);
}
return ary;
}
开发者ID:1nueve，项目名称:MacRuby，代码行数:14，代码来源:ossl_engine.c
示例10: ossl_engine_s_engines
static VALUE
ossl_engine_s_engines(VALUE klass)
{
ENGINE *e;
VALUE ary, obj;
ary = rb_ary_new();
for(e = ENGINE_get_first(); e; e = ENGINE_get_next(e)){
/* Need a ref count of two here because of ENGINE_free being
* called internally by OpenSSL when moving to the next ENGINE
* and by us when releasing the ENGINE reference */
ENGINE_up_ref(e);
WrapEngine(klass, obj, e);
rb_ary_push(ary, obj);
}
return ary;
}
开发者ID:Emily，项目名称:rubinius，代码行数:18，代码来源:ossl_engine.c
示例11: display_engine_list
static void display_engine_list(void)
{
ENGINE *h;
int loop;
h = ENGINE_get_first();
loop = 0;
printf("listing available engine types\n");
while(h)
{
printf("engine %i, id = \"%s\", name = \"%s\"\n",
loop++, ENGINE_get_id(h), ENGINE_get_name(h));
h = ENGINE_get_next(h);
}
printf("end of list\n");
/* ENGINE_get_first() increases the struct_ref counter, so we
must call ENGINE_free() to decrease it again */
ENGINE_free(h);
}
开发者ID:ashwinraghav，项目名称:Parallel_Open_SSL，代码行数:19，代码来源:enginetest.c
示例12: throw
std::vector<std::string> Engines::getEnginesList() throw (EngineException)
{
ENGINE *e;
const char *name;
std::vector<std::string> ret;
e = ENGINE_get_first();
if (!e)
{
throw EngineException(EngineException::ENGINE_NOT_FOUND, "Engines::getEnginesList");
}
name = ENGINE_get_name(e);
ret.push_back(name);
while ((e = ENGINE_get_next(e)) != NULL)
{
name = ENGINE_get_name(e);
ret.push_back(name);
}
return ret;
}
开发者ID:GNakayama，项目名称:libcryptosec，代码行数:19，代码来源:Engines.cpp
示例13: engine_get_first_nif
ERL_NIF_TERM engine_get_first_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[])
{/* () */
#ifdef HAS_ENGINE_SUPPORT
ERL_NIF_TERM ret, result;
ENGINE *engine;
ErlNifBinary engine_bin;
struct engine_ctx *ctx = NULL;
ASSERT(argc == 0);
if ((engine = ENGINE_get_first()) == NULL) {
if (!enif_alloc_binary(0, &engine_bin))
goto err;
engine_bin.size = 0;
return enif_make_tuple2(env, atom_ok, enif_make_binary(env, &engine_bin));
}
if ((ctx = enif_alloc_resource(engine_ctx_rtype, sizeof(struct engine_ctx))) == NULL)
goto err;
ctx->engine = engine;
ctx->id = NULL;
result = enif_make_resource(env, ctx);
ret = enif_make_tuple2(env, atom_ok, result);
goto done;
err:
ret = enif_make_badarg(env);
done:
if (ctx)
enif_release_resource(ctx);
return ret;
#else
return atom_notsup;
#endif
}
开发者ID:bjorng，项目名称:otp，代码行数:38，代码来源:engine.c
示例14: show_available_engines
void
show_available_engines ()
{
#if HAVE_OPENSSL_ENGINE /* Only defined for OpenSSL */
ENGINE *e;
printf ("OpenSSL Crypto Engines\n\n");
ENGINE_load_builtin_engines ();
e = ENGINE_get_first ();
while (e)
{
printf ("%s [%s]\n",
ENGINE_get_name (e),
ENGINE_get_id (e));
e = ENGINE_get_next (e);
}
ENGINE_cleanup ();
#else
printf ("Sorry, OpenSSL hardware crypto engine functionality is not available.\n");
#endif
}
开发者ID:AllardJ，项目名称:Tomato，代码行数:23，代码来源:crypto_openssl.c
示例15: myModConfig
const char *ssl_cmd_SSLCryptoDevice(cmd_parms *cmd,
void *dcfg,
const char *arg)
{
SSLModConfigRec *mc = myModConfig(cmd->server);
const char *err;
ENGINE *e;
if ((err = ap_check_cmd_context(cmd, GLOBAL_ONLY))) {
return err;
}
if (strcEQ(arg, "builtin")) {
mc->szCryptoDevice = NULL;
}
else if ((e = ENGINE_by_id(arg))) {
mc->szCryptoDevice = arg;
ENGINE_free(e);
}
else {
err = "SSLCryptoDevice: Invalid argument; must be one of: "
"'builtin' (none)";
e = ENGINE_get_first();
while (e) {
ENGINE *en;
err = apr_pstrcat(cmd->pool, err, ", '", ENGINE_get_id(e),
"' (", ENGINE_get_name(e), ")", NULL);
en = ENGINE_get_next(e);
ENGINE_free(e);
e = en;
}
return err;
}
apn_set_unsupport(cmd, "SSLCryptoDevice: No relevant directive in Nginx.");
return NULL;
}
开发者ID:Alivx，项目名称:apache2nginx，代码行数:37，代码来源:ssl_engine_config.c
示例16: main
int main(int argc, char *argv[])
{
ENGINE *block[512];
char buf[256];
const char *id, *name;
ENGINE *ptr;
int loop;
int to_return = 1;
ENGINE *new_h1 = NULL;
ENGINE *new_h2 = NULL;
ENGINE *new_h3 = NULL;
ENGINE *new_h4 = NULL;
/* enable memory leak checking unless explicitly disabled */
if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL) && (0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off"))))
{
CRYPTO_malloc_debug_init();
CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
}
else
{
/* OPENSSL_DEBUG_MEMORY=off */
CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
}
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
ERR_load_crypto_strings();
memset(block, 0, 512 * sizeof(ENGINE *));
if(((new_h1 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h1, "test_id0") ||
!ENGINE_set_name(new_h1, "First test item") ||
((new_h2 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h2, "test_id1") ||
!ENGINE_set_name(new_h2, "Second test item") ||
((new_h3 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h3, "test_id2") ||
!ENGINE_set_name(new_h3, "Third test item") ||
((new_h4 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h4, "test_id3") ||
!ENGINE_set_name(new_h4, "Fourth test item"))
{
printf("Couldn't set up test ENGINE structures\n");
goto end;
}
printf("\nenginetest beginning\n\n");
display_engine_list();
if(!ENGINE_add(new_h1))
{
printf("Add failed!\n");
goto end;
}
display_engine_list();
ptr = ENGINE_get_first();
if(!ENGINE_remove(ptr))
{
printf("Remove failed!\n");
goto end;
}
if (ptr)
ENGINE_free(ptr);
display_engine_list();
if(!ENGINE_add(new_h3) || !ENGINE_add(new_h2))
{
printf("Add failed!\n");
goto end;
}
display_engine_list();
if(!ENGINE_remove(new_h2))
{
printf("Remove failed!\n");
goto end;
}
display_engine_list();
if(!ENGINE_add(new_h4))
{
printf("Add failed!\n");
goto end;
}
display_engine_list();
if(ENGINE_add(new_h3))
{
printf("Add *should* have failed but didn't!\n");
goto end;
}
else
printf("Add that should fail did.\n");
ERR_clear_error();
if(ENGINE_remove(new_h2))
{
printf("Remove *should* have failed but didn't!\n");
goto end;
}
else
printf("Remove that should fail did.\n");
ERR_clear_error();
if(!ENGINE_remove(new_h3))
{
printf("Remove failed!\n");
goto end;
}
//.........这里部分代码省略.........
开发者ID:ashwinraghav，项目名称:Parallel_Open_SSL，代码行数:101，代码来源:enginetest.c
示例17: dst__openssl_init
isc_result_t
dst__openssl_init() {
isc_result_t result;
#ifdef USE_ENGINE
/* const char *name; */
ENGINE *re;
#endif
#ifdef DNS_CRYPTO_LEAKS
CRYPTO_malloc_debug_init();
CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
#endif
CRYPTO_set_mem_functions(mem_alloc, mem_realloc, mem_free);
nlocks = CRYPTO_num_locks();
locks = mem_alloc(sizeof(isc_mutex_t) * nlocks);
if (locks == NULL)
return (ISC_R_NOMEMORY);
result = isc_mutexblock_init(locks, nlocks);
if (result != ISC_R_SUCCESS)
goto cleanup_mutexalloc;
CRYPTO_set_locking_callback(lock_callback);
CRYPTO_set_id_callback(id_callback);
rm = mem_alloc(sizeof(RAND_METHOD));
if (rm == NULL) {
result = ISC_R_NOMEMORY;
goto cleanup_mutexinit;
}
rm->seed = NULL;
rm->bytes = entropy_get;
rm->cleanup = NULL;
rm->add = entropy_add;
rm->pseudorand = entropy_getpseudo;
rm->status = entropy_status;
#ifdef USE_ENGINE
OPENSSL_config(NULL);
#ifdef USE_PKCS11
#ifndef PKCS11_SO_PATH
#define PKCS11_SO_PATH "/usr/local/lib/engines/engine_pkcs11.so"
#endif
#ifndef PKCS11_MODULE_PATH
#define PKCS11_MODULE_PATH "/usr/lib/libpkcs11.so"
#endif
{
/*
* to use this to config the PIN, add in openssl.cnf:
* - at the beginning: "openssl_conf = openssl_def"
* - at any place these sections:
* [ openssl_def ]
* engines = engine_section
* [ engine_section ]
* pkcs11 = pkcs11_section
* [ pkcs11_section ]
* PIN = my___pin
*/
const char *pre_cmds[] = {
"SO_PATH", PKCS11_SO_PATH,
"LOAD", NULL,
"MODULE_PATH", PKCS11_MODULE_PATH
};
const char *post_cmds[] = {
/* "PIN", "my___pin" */
};
result = dst__openssl_load_engine("pkcs11", "pkcs11",
pre_cmds, 0,
post_cmds, /*1*/ 0);
if (result != ISC_R_SUCCESS)
goto cleanup_rm;
}
#endif /* USE_PKCS11 */
if (engine_id != NULL) {
e = ENGINE_by_id(engine_id);
if (e == NULL) {
result = ISC_R_NOTFOUND;
goto cleanup_rm;
}
if (!ENGINE_init(e)) {
result = ISC_R_FAILURE;
ENGINE_free(e);
goto cleanup_rm;
}
ENGINE_set_default(e, ENGINE_METHOD_ALL);
ENGINE_free(e);
} else {
ENGINE_register_all_complete();
for (e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e)) {
/*
* Something weird here. If we call ENGINE_finish()
* ENGINE_get_default_RAND() will fail.
*/
if (ENGINE_init(e)) {
if (he == NULL)
he = e;
}
}
}
re = ENGINE_get_default_RAND();
//.........这里部分代码省略.........
开发者ID:rodrigc，项目名称:bz-vimage，代码行数:101，代码来源:openssl_link.c
示例18: main
int main(int argc, char *argv[])
{
ENGINE *block[512];
char buf[256];
const char *id, *name, *p;
ENGINE *ptr;
int loop;
int to_return = 1;
ENGINE *new_h1 = NULL;
ENGINE *new_h2 = NULL;
ENGINE *new_h3 = NULL;
ENGINE *new_h4 = NULL;
p = getenv("OPENSSL_DEBUG_MEMORY");
if (p != NULL && strcmp(p, "on") == 0)
CRYPTO_set_mem_debug(1);
memset(block, 0, sizeof(block));
if (((new_h1 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h1, "test_id0") ||
!ENGINE_set_name(new_h1, "First test item") ||
((new_h2 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h2, "test_id1") ||
!ENGINE_set_name(new_h2, "Second test item") ||
((new_h3 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h3, "test_id2") ||
!ENGINE_set_name(new_h3, "Third test item") ||
((new_h4 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h4, "test_id3") ||
!ENGINE_set_name(new_h4, "Fourth test item")) {
printf("Couldn't set up test ENGINE structures\n");
goto end;
}
printf("\nenginetest beginning\n\n");
display_engine_list();
if (!ENGINE_add(new_h1)) {
printf("Add failed!\n");
goto end;
}
display_engine_list();
ptr = ENGINE_get_first();
if (!ENGINE_remove(ptr)) {
printf("Remove failed!\n");
goto end;
}
ENGINE_free(ptr);
display_engine_list();
if (!ENGINE_add(new_h3) || !ENGINE_add(new_h2)) {
printf("Add failed!\n");
goto end;
}
display_engine_list();
if (!ENGINE_remove(new_h2)) {
printf("Remove failed!\n");
goto end;
}
display_engine_list();
if (!ENGINE_add(new_h4)) {
printf("Add failed!\n");
goto end;
}
display_engine_list();
if (ENGINE_add(new_h3)) {
printf("Add *should* have failed but didn't!\n");
goto end;
} else
printf("Add that should fail did.\n");
ERR_clear_error();
if (ENGINE_remove(new_h2)) {
printf("Remove *should* have failed but didn't!\n");
goto end;
} else
printf("Remove that should fail did.\n");
ERR_clear_error();
if (!ENGINE_remove(new_h3)) {
printf("Remove failed!\n");
goto end;
}
display_engine_list();
if (!ENGINE_remove(new_h4)) {
printf("Remove failed!\n");
goto end;
}
display_engine_list();
/*
* Depending on whether there's any hardware support compiled in, this
* remove may be destined to fail.
*/
ptr = ENGINE_get_first();
if (ptr)
if (!ENGINE_remove(ptr))
printf("Remove failed!i - probably no hardware "
"support present.\n");
ENGINE_free(ptr);
display_engine_list();
if (!ENGINE_add(new_h1) || !ENGINE_remove(new_h1)) {
printf("Couldn't add and remove to an empty list!\n");
goto end;
} else
printf("Successfully added and removed to an empty list!\n");
//.........这里部分代码省略.........
开发者ID:1234-，项目名称:openssl，代码行数:101，代码来源:enginetest.c
示例19: main
int main(int argc, char *argv[])
{
ENGINE *block[512];
char *id, *name;
ENGINE *ptr;
int loop;
int to_return = 1;
ENGINE *new_h1 = NULL;
ENGINE *new_h2 = NULL;
ENGINE *new_h3 = NULL;
ENGINE *new_h4 = NULL;
ERR_load_crypto_strings();
memset(block, 0, 512 * sizeof(ENGINE *));
if(((new_h1 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h1, "test_id0") ||
!ENGINE_set_name(new_h1, "First test item") ||
((new_h2 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h2, "test_id1") ||
!ENGINE_set_name(new_h2, "Second test item") ||
((new_h3 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h3, "test_id2") ||
!ENGINE_set_name(new_h3, "Third test item") ||
((new_h4 = ENGINE_new()) == NULL) ||
!ENGINE_set_id(new_h4, "test_id3") ||
!ENGINE_set_name(new_h4, "Fourth test item"))
{
printf("Couldn't set up test ENGINE structures\n");
goto end;
}
printf("\nenginetest beginning\n\n");
display_engine_list();
if(!ENGINE_add(new_h1))
{
printf("Add failed!\n");
goto end;
}
display_engine_list();
ptr = ENGINE_get_first();
if(!ENGINE_remove(ptr))
{
printf("Remove failed!\n");
goto end;
}
if (ptr)
ENGINE_free(ptr);
display_engine_list();
if(!ENGINE_add(new_h3) || !ENGINE_add(new_h2))
{
printf("Add failed!\n");
goto end;
}
display_engine_list();
if(!ENGINE_remove(new_h2))
{
printf("Remove failed!\n");
goto end;
}
display_engine_list();
if(!ENGINE_add(new_h4))
{
printf("Add failed!\n");
goto end;
}
display_engine_list();
if(ENGINE_add(new_h3))
{
printf("Add *should* have failed but didn't!\n");
goto end;
}
else
printf("Add that should fail did.\n");
ERR_clear_error();
if(ENGINE_remove(new_h2))
{
printf("Remove *should* have failed but didn't!\n");
goto end;
}
else
printf("Remove that should fail did.\n");
ERR_clear_error();
if(!ENGINE_remove(new_h3))
{
printf("Remove failed!\n");
goto end;
}
display_engine_list();
if(!ENGINE_remove(new_h4))
{
printf("Remove failed!\n");
goto end;
}
display_engine_list();
/* Depending on whether there's any hardware support compiled
* in, this remove may be destined to fail. */
ptr = ENGINE_get_first();
if(ptr)
if(!ENGINE_remove(ptr))
printf("Remove failed!i - probably no hardware "
//.........这里部分代码省略.........
开发者ID:Basskrapfen，项目名称:openbsd，代码行数:101，代码来源:enginetest.c
示例20: MAIN
int MAIN(int argc, char **argv)
{
int ret=1,i;
const char **pp;
int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
ENGINE *e;
STACK *engines = sk_new_null();
STACK *pre_cmds = sk_new_null();
STACK *post_cmds = sk_new_null();
int badops=1;
BIO *bio_out=NULL;
const char *indent = " ";
apps_startup();
SSL_load_error_strings();
if (bio_err == NULL)
bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
if (!load_config(bio_err, NULL))
goto end;
bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
bio_out = BIO_push(tmpbio, bio_out);
}
#endif
argc--;
argv++;
while (argc >= 1)
{
if (strncmp(*argv,"-v",2) == 0)
{
if(strspn(*argv + 1, "v") < strlen(*argv + 1))
goto skip_arg_loop;
if((verbose=strlen(*argv + 1)) > 4)
goto skip_arg_loop;
}
else if (strcmp(*argv,"-c") == 0)
list_cap=1;
else if (strncmp(*argv,"-t",2) == 0)
{
test_avail=1;
if(strspn(*argv + 1, "t") < strlen(*argv + 1))
goto skip_arg_loop;
if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
goto skip_arg_loop;
}
else if (strcmp(*argv,"-pre") == 0)
{
argc--; argv++;
if (argc == 0)
goto skip_arg_loop;
sk_push(pre_cmds,*argv);
}
else if (strcmp(*argv,"-post") == 0)
{
argc--; argv++;
if (argc == 0)
goto skip_arg_loop;
sk_push(post_cmds,*argv);
}
else if ((strncmp(*argv,"-h",2) == 0) ||
(strcmp(*argv,"-?") == 0))
goto skip_arg_loop;
else
sk_push(engines,*argv);
argc--;
argv++;
}
/* Looks like everything went OK */
badops = 0;
skip_arg_loop:
if (badops)
{
for (pp=engine_usage; (*pp != NULL); pp++)
BIO_printf(bio_err,"%s",*pp);
goto end;
}
if (sk_num(engines) == 0)
{
for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
{
sk_push(engines,(char *)ENGINE_get_id(e));
}
}
for (i=0; i<sk_num(engines); i++)
{
const char *id = sk_value(engines,i);
if ((e = ENGINE_by_id(id)) != NULL)
{
const char *name = ENGINE_get_name(e);
/* Do "id" first, then "name". Easier to auto-parse. */
BIO_printf(bio_out, "(%s) %s\n", id, name);
util_do_cmds(e, pre_cmds, bio_out, indent);
//.........这里部分代码省略.........
开发者ID:174high，项目名称:openssl-0.9.8e_linux_porting，代码行数:101，代码来源:engine.c
注：本文中的ENGINE_get_first函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论