本文整理汇总了C++中ENGINE_add函数的典型用法代码示例。如果您正苦于以下问题：C++ ENGINE_add函数的具体用法？C++ ENGINE_add怎么用？C++ ENGINE_add使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ENGINE_add函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: engine_add_nif
ERL_NIF_TERM engine_add_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[])
{/* (Engine) */
#ifdef HAS_ENGINE_SUPPORT
struct engine_ctx *ctx;
// Get Engine
ASSERT(argc == 1);
if (!enif_get_resource(env, argv[0], engine_ctx_rtype, (void**)&ctx))
goto bad_arg;
if (!ENGINE_add(ctx->engine))
goto failed;
return atom_ok;
bad_arg:
return enif_make_badarg(env);
failed:
return ERROR_Atom(env, "add_engine_failed");
#else
return atom_notsup;
#endif
}
开发者ID:bjorng，项目名称:otp，代码行数:26，代码来源:engine.c
示例2: openssl_engine_add
static int openssl_engine_add(lua_State*L)
{
ENGINE* eng = CHECK_OBJECT(1, ENGINE, "openssl.engine");
int ret = ENGINE_add(eng);
lua_pushboolean(L, ret);
return 1;
}
开发者ID:sdgdsffdsfff，项目名称:lua-openssl，代码行数:7，代码来源:engine.c
示例3: ENGINE_load_gost
void ENGINE_load_gost(void)
{
ENGINE *toadd =engine_gost();
if (!toadd) return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
开发者ID:koson，项目名称:.NETMF_for_LPC17xx，代码行数:8，代码来源:gost_eng.cpp
示例4: ENGINE_load_4758cca
void ENGINE_load_4758cca(void)
{
ENGINE *e_4758 = engine_4758_cca();
if (!e_4758) return;
ENGINE_add(e_4758);
ENGINE_free(e_4758);
ERR_clear_error();
}
开发者ID:Sorcha，项目名称:NETMF-LPC，代码行数:8，代码来源:e_4758cca.cpp
示例5: ENGINE_load_ubsec
void ENGINE_load_ubsec(void)
{
/* Copied from eng_[openssl|dyn].c */
ENGINE *toadd = engine_ubsec();
if(!toadd) return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
开发者ID:EddieGarmon，项目名称:netduino-netmf，代码行数:9，代码来源:e_ubsec.cpp
示例6: engine_load_dasync_int
void engine_load_dasync_int(void)
{
ENGINE *toadd = engine_dasync();
if (!toadd)
return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
开发者ID:1234-，项目名称:openssl，代码行数:9，代码来源:e_dasync.c
示例7: LoadEngine
static ENGINE* LoadEngine()
{
// This function creates an engine for PKCS#11 and inspired by
// the "ENGINE_load_dynamic" function from OpenSSL, in file
// "crypto/engine/eng_dyn.c"
ENGINE* engine = ENGINE_new();
if (!engine)
{
LOG(ERROR) << "Cannot create an OpenSSL engine for PKCS#11";
throw OrthancException(ErrorCode_InternalError);
}
// Create a PKCS#11 context using libp11
context_ = pkcs11_new();
if (!context_)
{
LOG(ERROR) << "Cannot create a libp11 context for PKCS#11";
ENGINE_free(engine);
throw OrthancException(ErrorCode_InternalError);
}
if (!ENGINE_set_id(engine, PKCS11_ENGINE_ID) ||
!ENGINE_set_name(engine, PKCS11_ENGINE_NAME) ||
!ENGINE_set_cmd_defns(engine, PKCS11_ENGINE_COMMANDS) ||
// Register the callback functions
!ENGINE_set_init_function(engine, EngineInitialize) ||
!ENGINE_set_finish_function(engine, EngineFinalize) ||
!ENGINE_set_destroy_function(engine, EngineDestroy) ||
!ENGINE_set_ctrl_function(engine, EngineControl) ||
!ENGINE_set_load_pubkey_function(engine, EngineLoadPublicKey) ||
!ENGINE_set_load_privkey_function(engine, EngineLoadPrivateKey) ||
!ENGINE_set_RSA(engine, PKCS11_get_rsa_method()) ||
!ENGINE_set_ECDSA(engine, PKCS11_get_ecdsa_method()) ||
!ENGINE_set_ECDH(engine, PKCS11_get_ecdh_method()) ||
#if OPENSSL_VERSION_NUMBER >= 0x10100002L
!ENGINE_set_EC(engine, PKCS11_get_ec_key_method()) ||
#endif
// Make OpenSSL know about our PKCS#11 engine
!ENGINE_add(engine))
{
LOG(ERROR) << "Cannot initialize the OpenSSL engine for PKCS#11";
pkcs11_finish(context_);
ENGINE_free(engine);
throw OrthancException(ErrorCode_InternalError);
}
// If the "ENGINE_add" worked, it gets a structural
// reference. We release our just-created reference.
ENGINE_free(engine);
return ENGINE_by_id(PKCS11_ENGINE_ID);
}
开发者ID:PACSinTERRA，项目名称:orthanc，代码行数:57，代码来源:Pkcs11.cpp
示例8: ENGINE_load_test
void ENGINE_load_test(void)
{
fprintf(stderr, "arrive at ENGINE_load_test\n");
/* Copied from eng_[openssl|dyn].c */
ENGINE *toadd = engine_hwdev();
if(!toadd) return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
开发者ID:winstard，项目名称:GmSSL，代码行数:10，代码来源:cba_ecdh_engine.c
示例9: ENGINE_load_padlock
void ENGINE_load_padlock (void)
{
/* On non-x86 CPUs it just returns. */
#ifdef COMPILE_HW_PADLOCK
ENGINE *toadd = ENGINE_padlock ();
if (!toadd) return;
ENGINE_add (toadd);
ENGINE_free (toadd);
ERR_clear_error ();
#endif
}
开发者ID:dframework，项目名称:cpp-common，代码行数:11，代码来源:eng_padlock.c
示例10: ENGINE_load_ibmca
static
#endif
void ENGINE_load_ibmca(void)
{
/* Copied from eng_[openssl|dyn].c */
ENGINE *toadd = engine_ibmca();
if(!toadd) return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
开发者ID:LucidOne，项目名称:Rovio，代码行数:11，代码来源:hw_ibmca.c
示例11: ENGINE_load_gost
void ENGINE_load_gost(void)
{
ENGINE *toadd;
if (pmeth_GostR3410_94)
return;
toadd = engine_gost();
if (!toadd) return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
开发者ID:0culus，项目名称:openssl，代码行数:11，代码来源:gost_eng.c
示例12: ENGINE_load_cluster_labs
static
#endif
void ENGINE_load_cluster_labs(void)
{
ENGINE *cluster_labs = engine_cluster_labs();
if(!cluster_labs) return;
ENGINE_add(cluster_labs);
ENGINE_free(cluster_labs);
ERR_clear_error();
}
开发者ID:LucidOne，项目名称:Rovio，代码行数:12，代码来源:hw_cluster_labs.c
示例13: ENGINE_load_aesni
void ENGINE_load_aesni (void)
{
/* On non-x86 CPUs it just returns. */
#ifdef COMPILE_HW_AESNI
ENGINE *toadd = ENGINE_aesni();
if (!toadd)
return;
ENGINE_add (toadd);
ENGINE_free (toadd);
ERR_clear_error ();
#endif
}
开发者ID:evenmatrix，项目名称:streamster2-pyopenssl，代码行数:12，代码来源:eng_aesni.c
示例14: ENGINE_load_rdrand
void ENGINE_load_rdrand (void)
{
extern unsigned int OPENSSL_ia32cap_P[];
if (OPENSSL_ia32cap_P[1] & (1<<(62-32)))
{
ENGINE *toadd = ENGINE_rdrand();
if(!toadd) return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
}
开发者ID:benwh4，项目名称:libressl，代码行数:13，代码来源:eng_rdrand.c
示例15: ENGINE_load_dynamic
void ENGINE_load_dynamic(void)
{
ENGINE *toadd = engine_dynamic();
if(!toadd) return;
ENGINE_add(toadd);
/* If the "add" worked, it gets a structural reference. So either way,
* we release our just-created reference. */
ENGINE_free(toadd);
/* If the "add" didn't work, it was probably a conflict because it was
* already added (eg. someone calling ENGINE_load_blah then calling
* ENGINE_load_builtin_engines() perhaps). */
ERR_clear_error();
}
开发者ID:Cpasjuste，项目名称:platform_external_openssl，代码行数:13，代码来源:eng_dyn.c
示例16: ENGINE_load_HCSP
void ENGINE_load_HCSP(void)
{
ENGINE* toadd = engine_HCSP(); /* Copied from eng_[openssl|dyn].c */
if (!toadd) return;
ENGINE_add(toadd);
ENGINE_free(toadd);
#ifndef OPENSSL_NO_ERR
ERR_clear_error();
#endif
}
开发者ID:alepharchives，项目名称:ULib，代码行数:14，代码来源:HCSP.c
示例17: engine_load_afalg_int
void engine_load_afalg_int(void)
{
ENGINE *toadd;
if (!afalg_chk_platform())
return;
toadd = engine_afalg();
if (toadd == NULL)
return;
ENGINE_add(toadd);
ENGINE_free(toadd);
ERR_clear_error();
}
开发者ID:AlexanderPankiv，项目名称:node，代码行数:14，代码来源:e_afalg.c
示例18: EVP_CIPHER_CTX_copy
/*
* this function does not exist in OpenSSL yet... or ever?.
* a future version may break this function.
* tested on 0.9.7d.
*/
int
EVP_CIPHER_CTX_copy(EVP_CIPHER_CTX *out, EVP_CIPHER_CTX *in)
{
memcpy(out, in, sizeof(EVP_CIPHER_CTX));
#if defined(HAVE_ENGINE_ADD) && defined(HAVE_ST_ENGINE)
if (in->engine) ENGINE_add(out->engine);
if (in->cipher_data) {
out->cipher_data = OPENSSL_malloc(in->cipher->ctx_size);
memcpy(out->cipher_data, in->cipher_data, in->cipher->ctx_size);
}
#endif
return 1;
}
开发者ID:4nkh，项目名称:rhodes，代码行数:20，代码来源:openssl_missing.c
示例19: ENGINE_load_t4
/*
* This makes the engine "built-in" with OpenSSL.
* On non-T4 CPUs this just returns.
* Called by ENGINE_load_builtin_engines().
*/
void
ENGINE_load_t4(void)
{
#ifdef COMPILE_HW_T4
ENGINE *toadd = ENGINE_new();
if (toadd != NULL) {
if (t4_bind_helper(toadd, ENGINE_T4_ID) != 0) {
(void) ENGINE_add(toadd);
(void) ENGINE_free(toadd);
ERR_clear_error();
} else {
(void) ENGINE_free(toadd);
}
}
#endif
}
开发者ID:Nebraska，项目名称:userland-gate，代码行数:21，代码来源:eng_t4.c
示例20: engine_load_devcrypto_int
/*
* In case this engine is built into libcrypto, then it doesn't offer any
* ability to be dynamically loadable.
*/
void engine_load_devcrypto_int(void)
{
ENGINE *e = NULL;
if (!open_devcrypto())
return;
if ((e = ENGINE_new()) == NULL
|| !bind_devcrypto(e)) {
close_devcrypto();
ENGINE_free(e);
return;
}
ENGINE_add(e);
ENGINE_free(e); /* Loose our local reference */
ERR_clear_error();
}
开发者ID:ciz，项目名称:openssl，代码行数:22，代码来源:e_devcrypto.c
注：本文中的ENGINE_add函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论