本文整理汇总了C++中ENET_NET_TO_HOST_16函数的典型用法代码示例。如果您正苦于以下问题：C++ ENET_NET_TO_HOST_16函数的具体用法？C++ ENET_NET_TO_HOST_16怎么用？C++ ENET_NET_TO_HOST_16使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ENET_NET_TO_HOST_16函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: enet_socket_get_address
int
enet_socket_get_address (ENetSocket socket, ENetAddress * address)
{
struct sockaddr_in sin;
socklen_t sinLength = sizeof (struct sockaddr_in);
if (getsockname (socket, (struct sockaddr *) & sin, & sinLength) == -1)
return -1;
address -> host = (enet_uint32) sin.sin_addr.s_addr;
address -> port = ENET_NET_TO_HOST_16 (sin.sin_port);
return 0;
}
开发者ID:Ablu，项目名称:enet，代码行数:14，代码来源:unix.c
示例2: enet_address_set_host
int
enet_address_set_host (ENetAddress * address, const char * name)
{
struct addrinfo * result_box;
int error_code;
error_code = getaddrinfo(name, NULL, &hints, &result_box);
if (error_code != 0) return error_code;
if (result_box == NULL) return -1;
memcopy(&address, result_box -> ai_addr, result_box -> ai_addrlen);
address -> port = ENET_NET_TO_HOST_16 (address -> port);
return error_code;
}
开发者ID:Ericson2314，项目名称:enet，代码行数:14，代码来源:unix.c
示例3: enet_socket_accept
ENetSocket
enet_socket_accept (ENetSocket socket, ENetAddress * address)
{
SOCKET result;
// only call enet_address_get_size if ptr is valid
int length = address != NULL ? enet_address_get_size (address) : 0;
result = accept (socket,
address != NULL ? (struct sockaddr *) address : NULL,
address != NULL ? & length : NULL);
if (result == INVALID_SOCKET)
return ENET_SOCKET_NULL;
if (address != NULL)
address -> port = ENET_NET_TO_HOST_16 (address -> port);
return result;
}
开发者ID:thewolfwillcome，项目名称:enet，代码行数:18，代码来源:win32.c
示例4: enet_socket_receive
int
enet_socket_receive (ENetSocket socket,
ENetAddress * address,
ENetBuffer * buffers,
size_t bufferCount)
{
struct msghdr msgHdr;
struct sockaddr_in sin;
int recvLength;
memset (& msgHdr, 0, sizeof (struct msghdr));
if (address != NULL)
{
msgHdr.msg_name = & sin;
msgHdr.msg_namelen = sizeof (struct sockaddr_in);
}
msgHdr.msg_iov = (struct iovec *) buffers;
msgHdr.msg_iovlen = bufferCount;
recvLength = recvmsg (socket, & msgHdr, MSG_NOSIGNAL);
if (recvLength == -1)
{
if (errno == EWOULDBLOCK)
return 0;
return -1;
}
#ifdef HAS_MSGHDR_FLAGS
if (msgHdr.msg_flags & MSG_TRUNC)
return -1;
#endif
if (address != NULL)
{
address -> host = (enet_uint32) sin.sin_addr.s_addr;
address -> port = ENET_NET_TO_HOST_16 (sin.sin_port);
}
return recvLength;
}
开发者ID:bitnia，项目名称:enet，代码行数:44，代码来源:unix.c
示例5: enet_socket_receive
int
enet_socket_receive (ENetSocket socket,
ENetAddress * address,
ENetBuffer * buffers,
size_t bufferCount)
{
INT sinLength = sizeof (struct sockaddr_in);
DWORD flags = 0,
recvLength;
struct sockaddr_in sin;
memset(&sin, 0, sizeof sin);
if (WSARecvFrom (socket,
(LPWSABUF) buffers,
(DWORD) bufferCount,
& recvLength,
& flags,
address != NULL ? (struct sockaddr *) & sin : NULL,
address != NULL ? & sinLength : NULL,
NULL,
NULL) == SOCKET_ERROR)
{
switch (WSAGetLastError ())
{
case WSAEWOULDBLOCK:
case WSAECONNRESET:
return 0;
}
return -1;
}
if (flags & MSG_PARTIAL)
return -1;
if (address != NULL)
{
address -> host = (enet_uint32) sin.sin_addr.s_addr;
address -> port = ENET_NET_TO_HOST_16 (sin.sin_port);
}
return (int) recvLength;
}
开发者ID:cxong，项目名称:ENetLANChatServer，代码行数:43，代码来源:win32.c
示例6: enet_socket_accept
ENetSocket
enet_socket_accept (ENetSocket socket, ENetAddress * address)
{
int result;
// only call enet_address_get_size if ptr is valid
socklen_t length = sizeof (struct sockaddr_in6);
result = accept (socket,
address != NULL ? (struct sockaddr *) & address : NULL,
address != NULL ? & length : NULL);
if (result == -1)
return ENET_SOCKET_NULL;
if (address != NULL)
address -> port = ENET_NET_TO_HOST_16 (address -> port);
return result;
}
开发者ID:Ericson2314，项目名称:enet，代码行数:19，代码来源:unix.c
示例7: enet_socket_accept
ENetSocket
enet_socket_accept (ENetSocket socket, ENetAddress * address)
{
SOCKET result;
struct sockaddr_in sin;
int sinLength = sizeof (struct sockaddr_in);
result = accept (socket,
address != NULL ? (struct sockaddr *) & sin : NULL,
address != NULL ? & sinLength : NULL);
if (result == INVALID_SOCKET)
return ENET_SOCKET_NULL;
if (address != NULL)
{
address -> host = (enet_uint32) sin.sin_addr.s_addr;
address -> port = ENET_NET_TO_HOST_16 (sin.sin_port);
}
return result;
}
开发者ID:quom5，项目名称:q5pack_game，代码行数:22，代码来源:win32.c
示例8: enet_address_set_host
int
enet_address_set_host (ENetAddress * address, const char * name)
{
struct addrinfo * resultList;
int error_code;
error_code = getaddrinfo(name, NULL, &hints, &resultList);
if (error_code != 0)
{
if (resultList != NULL)
freeaddrinfo (resultList);
return error_code;
}
if (resultList == NULL) return -1;
// We simply grab the first information (IPv6 is sorted first so we get IPv6 information when IPv6 is enabled!
memcpy(address, resultList->ai_addr, resultList->ai_addrlen);
address -> port = ENET_NET_TO_HOST_16 (address -> port);
freeaddrinfo (resultList);
return error_code;
}
开发者ID:thewolfwillcome，项目名称:enet，代码行数:22，代码来源:win32.c
示例9: enet_socket_receive
int
enet_socket_receive (ENetSocket socket,
ENetAddress * address,
ENetBuffer * buffers,
size_t bufferCount)
{
INT length = sizeof (struct sockaddr_in6);
DWORD flags = 0,
recvLength;
if (WSARecvFrom (socket,
(LPWSABUF) buffers,
(DWORD) bufferCount,
& recvLength,
& flags,
address != NULL ? (struct sockaddr *) address : NULL,
address != NULL ? & length : NULL,
NULL,
NULL) == SOCKET_ERROR)
{
switch (WSAGetLastError ())
{
case WSAEWOULDBLOCK:
case WSAECONNRESET:
return 0;
}
return -1;
}
if (flags & MSG_PARTIAL)
return -1;
if (address != NULL)
address -> port = ENET_NET_TO_HOST_16 (address -> port);
return (int) recvLength;
}
开发者ID:thewolfwillcome，项目名称:enet，代码行数:38，代码来源:win32.c
示例10: enet_peer_queue_incoming_command
ENetIncomingCommand *
enet_peer_queue_incoming_command (ENetPeer * peer, const ENetProtocol * command, ENetPacket * packet, enet_uint32 fragmentCount)
{
static ENetIncomingCommand dummyCommand;
ENetChannel * channel = & peer -> channels [command -> header.channelID];
enet_uint32 unreliableSequenceNumber = 0, reliableSequenceNumber;
enet_uint16 reliableWindow, currentWindow;
ENetIncomingCommand * incomingCommand;
ENetListIterator currentCommand;
if (peer -> state == ENET_PEER_STATE_DISCONNECT_LATER)
goto freePacket;
if ((command -> header.command & ENET_PROTOCOL_COMMAND_MASK) != ENET_PROTOCOL_COMMAND_SEND_UNSEQUENCED)
{
reliableSequenceNumber = command -> header.reliableSequenceNumber;
reliableWindow = reliableSequenceNumber / ENET_PEER_RELIABLE_WINDOW_SIZE;
currentWindow = channel -> incomingReliableSequenceNumber / ENET_PEER_RELIABLE_WINDOW_SIZE;
if (reliableSequenceNumber < channel -> incomingReliableSequenceNumber)
reliableWindow += ENET_PEER_RELIABLE_WINDOWS;
if (reliableWindow < currentWindow || reliableWindow >= currentWindow + ENET_PEER_FREE_RELIABLE_WINDOWS - 1)
goto freePacket;
}
switch (command -> header.command & ENET_PROTOCOL_COMMAND_MASK)
{
case ENET_PROTOCOL_COMMAND_SEND_FRAGMENT:
case ENET_PROTOCOL_COMMAND_SEND_RELIABLE:
if (reliableSequenceNumber == channel -> incomingReliableSequenceNumber)
goto freePacket;
for (currentCommand = enet_list_previous (enet_list_end (& channel -> incomingReliableCommands));
currentCommand != enet_list_end (& channel -> incomingReliableCommands);
currentCommand = enet_list_previous (currentCommand))
{
incomingCommand = (ENetIncomingCommand *) currentCommand;
if (reliableSequenceNumber >= channel -> incomingReliableSequenceNumber)
{
if (incomingCommand -> reliableSequenceNumber < channel -> incomingReliableSequenceNumber)
continue;
}
else
if (incomingCommand -> reliableSequenceNumber >= channel -> incomingReliableSequenceNumber)
break;
if (incomingCommand -> reliableSequenceNumber <= reliableSequenceNumber)
{
if (incomingCommand -> reliableSequenceNumber < reliableSequenceNumber)
break;
goto freePacket;
}
}
break;
case ENET_PROTOCOL_COMMAND_SEND_UNRELIABLE:
unreliableSequenceNumber = ENET_NET_TO_HOST_16 (command -> sendUnreliable.unreliableSequenceNumber);
if (reliableSequenceNumber == channel -> incomingReliableSequenceNumber &&
unreliableSequenceNumber <= channel -> incomingUnreliableSequenceNumber)
goto freePacket;
for (currentCommand = enet_list_previous (enet_list_end (& channel -> incomingUnreliableCommands));
currentCommand != enet_list_end (& channel -> incomingUnreliableCommands);
currentCommand = enet_list_previous (currentCommand))
{
incomingCommand = (ENetIncomingCommand *) currentCommand;
if ((incomingCommand -> command.header.command & ENET_PROTOCOL_COMMAND_MASK) != ENET_PROTOCOL_COMMAND_SEND_UNRELIABLE)
continue;
if (reliableSequenceNumber >= channel -> incomingReliableSequenceNumber)
{
if (incomingCommand -> reliableSequenceNumber < channel -> incomingReliableSequenceNumber)
continue;
}
else
if (incomingCommand -> reliableSequenceNumber >= channel -> incomingReliableSequenceNumber)
break;
if (incomingCommand -> reliableSequenceNumber < reliableSequenceNumber)
break;
if (incomingCommand -> reliableSequenceNumber > reliableSequenceNumber)
continue;
if (incomingCommand -> unreliableSequenceNumber <= unreliableSequenceNumber)
{
if (incomingCommand -> unreliableSequenceNumber < unreliableSequenceNumber)
break;
goto freePacket;
}
}
break;
//.........这里部分代码省略.........
开发者ID:Kittnz，项目名称:FoxEmu，代码行数:101，代码来源:peer.cpp
示例11: enet_protocol_handle_incoming_commands
static int
enet_protocol_handle_incoming_commands (ENetHost * host, ENetEvent * event)
{
ENetProtocolHeader * header;
ENetProtocol * command;
ENetPeer * peer;
enet_uint8 * currentData;
size_t commandCount;
if (host -> receivedDataLength < sizeof (ENetProtocolHeader))
return 0;
header = (ENetProtocolHeader *) host -> receivedData;
header -> peerID = ENET_NET_TO_HOST_16 (header -> peerID);
header -> sentTime = ENET_NET_TO_HOST_32 (header -> sentTime);
if (header -> peerID == 0xFFFF)
peer = NULL;
else
if (header -> peerID >= host -> peerCount)
return 0;
else
{
peer = & host -> peers [header -> peerID];
if (peer -> state == ENET_PEER_STATE_DISCONNECTED ||
peer -> state == ENET_PEER_STATE_ZOMBIE ||
host -> receivedAddress.host != peer -> address.host ||
header -> challenge != peer -> challenge)
return 0;
else
peer -> address.port = host -> receivedAddress.port;
}
if (peer != NULL)
peer -> incomingDataTotal += host -> receivedDataLength;
commandCount = header -> commandCount;
currentData = host -> receivedData + sizeof (ENetProtocolHeader);
while (commandCount > 0 &&
currentData < & host -> receivedData [host -> receivedDataLength])
{
command = (ENetProtocol *) currentData;
if (currentData + sizeof (ENetProtocolCommandHeader) > & host -> receivedData [host -> receivedDataLength])
return 0;
command -> header.commandLength = ENET_NET_TO_HOST_32 (command -> header.commandLength);
if (currentData + command -> header.commandLength > & host -> receivedData [host -> receivedDataLength])
return 0;
-- commandCount;
currentData += command -> header.commandLength;
if (peer == NULL)
{
if (command -> header.command != ENET_PROTOCOL_COMMAND_CONNECT)
return 0;
}
command -> header.reliableSequenceNumber = ENET_NET_TO_HOST_32 (command -> header.reliableSequenceNumber);
switch (command -> header.command)
{
case ENET_PROTOCOL_COMMAND_ACKNOWLEDGE:
enet_protocol_handle_acknowledge (host, event, peer, command);
break;
case ENET_PROTOCOL_COMMAND_CONNECT:
peer = enet_protocol_handle_connect (host, header, command);
break;
case ENET_PROTOCOL_COMMAND_VERIFY_CONNECT:
enet_protocol_handle_verify_connect (host, event, peer, command);
break;
case ENET_PROTOCOL_COMMAND_DISCONNECT:
enet_protocol_handle_disconnect (host, peer, command);
break;
case ENET_PROTOCOL_COMMAND_PING:
enet_protocol_handle_ping (host, peer, command);
break;
case ENET_PROTOCOL_COMMAND_SEND_RELIABLE:
enet_protocol_handle_send_reliable (host, peer, command);
break;
case ENET_PROTOCOL_COMMAND_SEND_UNRELIABLE:
enet_protocol_handle_send_unreliable (host, peer, command);
//.........这里部分代码省略.........
开发者ID:wangeek，项目名称:Egoboo，代码行数:101，代码来源:protocol.c
示例12: enet_protocol_handle_connect
static ENetPeer *
enet_protocol_handle_connect (ENetHost * host, const ENetProtocolHeader * header, const ENetProtocol * command)
{
enet_uint16 mtu;
enet_uint32 windowSize;
ENetChannel * channel;
size_t channelCount;
ENetPeer * currentPeer;
ENetProtocol verifyCommand;
if (command -> header.commandLength < sizeof (ENetProtocolConnect))
return NULL;
channelCount = ENET_NET_TO_HOST_32 (command -> connect.channelCount);
if (channelCount < ENET_PROTOCOL_MINIMUM_CHANNEL_COUNT ||
channelCount > ENET_PROTOCOL_MAXIMUM_CHANNEL_COUNT)
return NULL;
for (currentPeer = host -> peers;
currentPeer < & host -> peers [host -> peerCount];
++ currentPeer)
{
if (currentPeer -> state != ENET_PEER_STATE_DISCONNECTED &&
currentPeer -> address.host == host -> receivedAddress.host &&
currentPeer -> address.port == host -> receivedAddress.port &&
currentPeer -> challenge == header -> challenge)
return NULL;
}
for (currentPeer = host -> peers;
currentPeer < & host -> peers [host -> peerCount];
++ currentPeer)
{
if (currentPeer -> state == ENET_PEER_STATE_DISCONNECTED)
break;
}
if (currentPeer >= & host -> peers [host -> peerCount])
return NULL;
currentPeer -> state = ENET_PEER_STATE_ACKNOWLEDGING_CONNECT;
currentPeer -> challenge = header -> challenge;
currentPeer -> address = host -> receivedAddress;
currentPeer -> outgoingPeerID = ENET_NET_TO_HOST_16 (command -> connect.outgoingPeerID);
currentPeer -> incomingBandwidth = ENET_NET_TO_HOST_32 (command -> connect.incomingBandwidth);
currentPeer -> outgoingBandwidth = ENET_NET_TO_HOST_32 (command -> connect.outgoingBandwidth);
currentPeer -> packetThrottleInterval = ENET_NET_TO_HOST_32 (command -> connect.packetThrottleInterval);
currentPeer -> packetThrottleAcceleration = ENET_NET_TO_HOST_32 (command -> connect.packetThrottleAcceleration);
currentPeer -> packetThrottleDeceleration = ENET_NET_TO_HOST_32 (command -> connect.packetThrottleDeceleration);
currentPeer -> channels = (ENetChannel *) enet_malloc (channelCount * sizeof (ENetChannel));
currentPeer -> channelCount = channelCount;
for (channel = currentPeer -> channels;
channel < & currentPeer -> channels [channelCount];
++ channel)
{
channel -> outgoingReliableSequenceNumber = 0;
channel -> outgoingUnreliableSequenceNumber = 0;
channel -> incomingReliableSequenceNumber = 0;
channel -> incomingUnreliableSequenceNumber = 0;
enet_list_clear (& channel -> incomingReliableCommands);
enet_list_clear (& channel -> incomingUnreliableCommands);
}
mtu = ENET_NET_TO_HOST_16 (command -> connect.mtu);
if (mtu < ENET_PROTOCOL_MINIMUM_MTU)
mtu = ENET_PROTOCOL_MINIMUM_MTU;
else
if (mtu > ENET_PROTOCOL_MAXIMUM_MTU)
mtu = ENET_PROTOCOL_MAXIMUM_MTU;
currentPeer -> mtu = mtu;
if (host -> outgoingBandwidth == 0 &&
currentPeer -> incomingBandwidth == 0)
currentPeer -> windowSize = ENET_PROTOCOL_MAXIMUM_WINDOW_SIZE;
else
currentPeer -> windowSize = (ENET_MIN (host -> outgoingBandwidth, currentPeer -> incomingBandwidth) /
ENET_PEER_WINDOW_SIZE_SCALE) *
ENET_PROTOCOL_MINIMUM_WINDOW_SIZE;
if (currentPeer -> windowSize < ENET_PROTOCOL_MINIMUM_WINDOW_SIZE)
currentPeer -> windowSize = ENET_PROTOCOL_MINIMUM_WINDOW_SIZE;
else
if (currentPeer -> windowSize > ENET_PROTOCOL_MAXIMUM_WINDOW_SIZE)
currentPeer -> windowSize = ENET_PROTOCOL_MAXIMUM_WINDOW_SIZE;
if (host -> incomingBandwidth == 0)
windowSize = ENET_PROTOCOL_MAXIMUM_WINDOW_SIZE;
else
windowSize = (host -> incomingBandwidth / ENET_PEER_WINDOW_SIZE_SCALE) *
ENET_PROTOCOL_MINIMUM_WINDOW_SIZE;
if (windowSize > ENET_NET_TO_HOST_32 (command -> connect.windowSize))
windowSize = ENET_NET_TO_HOST_32 (command -> connect.windowSize);
if (windowSize < ENET_PROTOCOL_MINIMUM_WINDOW_SIZE)
//.........这里部分代码省略.........
开发者ID:wangeek，项目名称:Egoboo，代码行数:101，代码来源:protocol.c
示例13: process
// server side processing of updates: does very little and most state is tracked
// client only could be extended to move more gameplay to server (at expense of
// lag)
void process(ENetPacket * packet, int sender) { // sender may be -1
const u16 len = *(u16*) packet->data;
if (ENET_NET_TO_HOST_16(len)!=packet->dataLength) {
disconnect_client(sender, "packet length");
return;
}
u8 *end = packet->data+packet->dataLength;
u8 *p = packet->data+2;
char text[MAXTRANS];
int cn = -1, type;
while (p<end) switch (type = getint(p)) {
case SV_TEXT:
sgetstr();
break;
case SV_INITC2S:
sgetstr();
strcpy_s(clients[cn].name, text);
sgetstr();
getint(p);
break;
case SV_MAPCHANGE: {
sgetstr();
int reqmode = getint(p);
if (reqmode<0) reqmode = 0;
if (smapname[0] && !mapreload && !vote(text, reqmode, sender)) return;
mapreload = false;
mode = reqmode;
minremain = mode&1 ? 15 : 10;
mapend = lastsec+minremain*60;
interm = 0;
strcpy_s(smapname, text);
resetitems();
sender = -1;
}
break;
case SV_ITEMLIST: {
int n;
while ((n = getint(p))!=-1) if (notgotitems) {
server_entity se = { false, 0 };
while (sents.size()<=n) sents.push_back(se);
sents[n].spawned = true;
}
notgotitems = false;
}
break;
case SV_ITEMPICKUP: {
const int n = getint(p);
pickup(n, getint(p), sender);
}
break;
case SV_PING:
send2(false, cn, SV_PONG, getint(p));
break;
case SV_POS: {
cn = getint(p);
if (cn<0 || cn>=clients.size() || clients[cn].type==ST_EMPTY) {
disconnect_client(sender, "client num");
return;
}
int size = msgsizelookup(type);
assert(size!=-1);
loopi(size-2) getint(p);
}
break;
case SV_SENDMAP: {
sgetstr();
const auto mapsize = getint(p);
sendmaps(sender, text, mapsize, p);
}
return;
case SV_RECVMAP:
send(sender, recvmap(sender));
return;
case SV_EXT: // allows for new features that require no server updates
for (int n = getint(p); n; n--) getint(p);
break;
default: {
const int size = msgsizelookup(type);
if (size==-1) { disconnect_client(sender, "tag type"); return; };
loopi(size-1) getint(p);
}
}
if (p>end) { disconnect_client(sender, "end of packet"); return; };
multicast(packet, sender);
}
开发者ID:bsegovia，项目名称:mini.q，代码行数:91，代码来源:server.cpp
示例14: localservertoclient
void localservertoclient(uchar *buf, int len) // processes any updates from the server
{
if(ENET_NET_TO_HOST_16(*(ushort *)buf)!=len) neterr("packet length");
incomingdemodata(buf, len);
uchar *end = buf+len;
uchar *p = buf+2;
char text[MAXTRANS];
int cn = -1, type;
dynent *d = NULL;
bool mapchanged = false;
while(p<end) switch(type = getint(p))
{
case SV_INITS2C: // welcome messsage from the server
{
cn = getint(p);
int prot = getint(p);
if(prot!=PROTOCOL_VERSION)
{
conoutf("you are using a different game protocol (you: %d, server: %d)", PROTOCOL_VERSION, prot);
disconnect();
return;
};
toservermap[0] = 0;
clientnum = cn; // we are now fully connected
if(!getint(p)) strcpy_s(toservermap, getclientmap()); // we are the first client on this server, set map
sgetstr();
if(text[0] && strcmp(text, clientpassword))
{
conoutf("you need to set the correct password to join this server!");
disconnect();
return;
};
if(getint(p)==1)
{
conoutf("server is FULL, disconnecting..");
};
break;
};
case SV_POS: // position of another client
{
cn = getint(p);
d = getclient(cn);
if(!d) return;
d->o.x = getint(p)/DMF;
d->o.y = getint(p)/DMF;
d->o.z = getint(p)/DMF;
d->yaw = getint(p)/DAF;
d->pitch = getint(p)/DAF;
d->roll = getint(p)/DAF;
d->vel.x = getint(p)/DVF;
d->vel.y = getint(p)/DVF;
d->vel.z = getint(p)/DVF;
int f = getint(p);
d->strafe = (f&3)==3 ? -1 : f&3;
f >>= 2;
d->move = (f&3)==3 ? -1 : f&3;
d->onfloor = (f>>2)&1;
int state = f>>3;
if(state==CS_DEAD && d->state!=CS_DEAD) d->lastaction = lastmillis;
d->state = state;
if(!demoplayback) updatepos(d);
break;
};
case SV_SOUND:
playsound(getint(p), &d->o);
break;
case SV_TEXT:
sgetstr();
conoutf("%s:\f %s", d->name, text);
break;
case SV_MAPCHANGE:
sgetstr();
changemapserv(text, getint(p));
mapchanged = true;
break;
case SV_ITEMLIST:
{
int n;
if(mapchanged) { senditemstoserver = false; resetspawns(); };
while((n = getint(p))!=-1) if(mapchanged) setspawn(n, true);
break;
};
case SV_MAPRELOAD: // server requests next map
{
getint(p);
sprintf_sd(nextmapalias)("nextmap_%s", getclientmap());
char *map = getalias(nextmapalias); // look up map in the cycle
changemap(map ? map : getclientmap());
break;
};
case SV_INITC2S: // another client either connected or changed name/team
//.........这里部分代码省略.........
开发者ID:ruslashev，项目名称:cube1，代码行数:101，代码来源:clients2c.cpp
示例15: localservertoclient
void localservertoclient(uchar *buf, int len) // processes any updates from the server
{
if (ENET_NET_TO_HOST_16(*(ushort *)buf) != len)
neterr("packet length");
incomingdemodata(buf, len);
uchar *end = buf + len;
uchar *p = buf + 2;
char text[MAXTRANS];
int cn = -1, type;
Sprite *spr = NULL;
bool mapchanged = false;
while (p < end)
switch (type = getint(p)) {
case SV_INITS2C: // welcome messsage from the server
{
cn = getint(p);
int prot = getint(p);
if (prot != PROTOCOL_VERSION) {
conoutf( "you are using a different game protocol (you: %d, server: %d)", PROTOCOL_VERSION, prot);
disconnect();
return;
};
toservermap = "";
clientnum = cn; // we are now fully connected
if (!getint(p)) {
toservermap = getclientmap(); // we are the first client on this server, set map
}
sgetstr();
if (text[0] && strcmp(text, clientpassword)) {
conoutf( "you need to set the correct password to join this server!");
disconnect();
return;
};
if (getint(p) == 1) {
conoutf("server is FULL, disconnecting..");
};
break;
}
case SV_POS: // position of another client
{
cn = getint(p);
spr = getclient(cn);
if (!spr)
return;
spr->o.x = getint(p) / DMF;
spr->o.y = getint(p) / DMF;
spr->o.z = getint(p) / DMF;
spr->yaw = getint(p) / DAF;
spr->pitch = getint(p) / DAF;
spr->roll = getint(p) / DAF;
spr->vel.x = getint(p) / DVF;
spr->vel.y = getint(p) / DVF;
spr->vel.z = getint(p) / DVF;
int f = getint(p);
spr->strafe = (f & 3) == 3 ? -1 : f & 3;
f >>= 2;
spr->move = (f & 3) == 3 ? -1 : f & 3;
spr->onfloor = (f >> 2) & 1;
int state = f >> 3;
if (state == CS_DEAD && spr->state != CS_DEAD)
spr->lastaction = lastmillis;
spr->state = state;
if (!demoplayback)
updatepos(spr);
break;
}
case SV_SOUND:
playsound(getint(p), &spr->o);
break;
case SV_TEXT:
sgetstr();
conoutf("%s:\f %s", spr->name, text);
break;
case SV_MAPCHANGE:
sgetstr();
changemapserv(text, getint(p));
mapchanged = true;
break;
case SV_ITEMLIST: {
int n;
if (mapchanged) {
senditemstoserver = false;
resetspawns();
};
while ((n = getint(p)) != -1) {
if (mapchanged)
setspawn(n, true);
}
break;
}
case SV_MAPRELOAD: // server requests next map
{
getint(p);
std::string nextmapalias = std::string("nextmap_") + getclientmap();
std::string map = getalias(nextmapalias); // look up map in the cycle
changemap(map.empty() ? getclientmap() : map);
//.........这里部分代码省略.........
开发者ID:mailgyc，项目名称:cube，代码行数:101，代码来源:clients2c.cpp
注：本文中的ENET_NET_TO_HOST_16函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论