C++ EC_POINT_get_affine_coordinates_GF2m函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中EC_POINT_get_affine_coordinates_GF2m函数的典型用法代码示例。如果您正苦于以下问题：C++ EC_POINT_get_affine_coordinates_GF2m函数的具体用法？C++ EC_POINT_get_affine_coordinates_GF2m怎么用？C++ EC_POINT_get_affine_coordinates_GF2m使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了EC_POINT_get_affine_coordinates_GF2m函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MKEM_decode_message

int
MKEM_decode_message(const MKEM *kp, uint8_t *secret, const uint8_t *message)
{
  int use_curve0 = !(message[0] & kp->params->curve_bit);
  const EC_GROUP *ca = use_curve0 ? kp->params->c0 : kp->params->c1;
  const BIGNUM *sa = use_curve0 ? kp->s0 : kp->s1;
  EC_POINT *q = 0, *r = 0;
  uint8_t *unpadded = 0;
  BIGNUM x, y;
  size_t mlen = kp->params->msgsize;
  int rv;

  if (!kp->s0 || !kp->s1) /* secret key not available */
    return -1;

  BN_init(&x);
  BN_init(&y);
  FAILZ(q = EC_POINT_new(ca));
  FAILZ(r = EC_POINT_new(ca));
  FAILZ(unpadded = malloc(mlen + 1));

  /* Copy the message, erase the padding bits, and put an 0x02 byte on
     the front so we can use EC_POINT_oct2point to recover the
     y-coordinate. */
  unpadded[0] = 0x02;
  unpadded[1] = (message[0] & ~(kp->params->pad_mask|kp->params->curve_bit));
  memcpy(&unpadded[2], &message[1], mlen - 1);

  FAILZ(EC_POINT_oct2point(ca, q, unpadded, mlen + 1,
                           kp->params->ctx));
  FAILZ(EC_POINT_mul(ca, r, 0, q, sa, kp->params->ctx));

  FAILZ(EC_POINT_get_affine_coordinates_GF2m(ca, q, &x, &y, kp->params->ctx));
  if (bn2bin_padhi(&x, secret, mlen) != mlen)
    goto fail;

  FAILZ(EC_POINT_get_affine_coordinates_GF2m(ca, r, &x, &y, kp->params->ctx));
  if (bn2bin_padhi(&x, secret + mlen, mlen) != mlen)
    goto fail;

  rv = 0;
 done:
  if (unpadded) {
    memset(unpadded, 0, mlen + 1);
    free(unpadded);
  }
  if (q) EC_POINT_clear_free(q);
  if (r) EC_POINT_clear_free(r);
  BN_clear(&x);
  BN_clear(&y);
  return rv;

 fail:
  rv = -1;
  memset(secret, 0, mlen * 2);
  goto done;
}

开发者ID:zackw，项目名称:moeller-ref，代码行数:57，代码来源:mref-o.c

示例2: ec_get_pubkey

static int ec_get_pubkey(EC_KEY *key, BIGNUM *x, BIGNUM *y)
{
    const EC_POINT *pt;
    const EC_GROUP *grp;
    const EC_METHOD *meth;
    int rv;
    BN_CTX *ctx;
    ctx = BN_CTX_new();
    if (!ctx)
        return 0;
    grp = EC_KEY_get0_group(key);
    pt = EC_KEY_get0_public_key(key);
    meth = EC_GROUP_method_of(grp);
    if (EC_METHOD_get_field_type(meth) == NID_X9_62_prime_field)
        rv = EC_POINT_get_affine_coordinates_GFp(grp, pt, x, y, ctx);
    else
# ifdef OPENSSL_NO_EC2M
    {
        fprintf(stderr, "ERROR: GF2m not supported\n");
        exit(1);
    }
# else
        rv = EC_POINT_get_affine_coordinates_GF2m(grp, pt, x, y, ctx);
# endif

    BN_CTX_free(ctx);

    return rv;

}

开发者ID:davidlt，项目名称:openssl-fedora，代码行数:30，代码来源:fips_ecdsavs.c

示例3: ec_GF2m_simple_make_affine

/* Forces the given EC_POINT to internally use affine coordinates. */
int ec_GF2m_simple_make_affine(const EC_GROUP *group, EC_POINT *point, BN_CTX *ctx)
	{
	BN_CTX *new_ctx = NULL;
	BIGNUM *x, *y;
	int ret = 0;

	if (point->Z_is_one || EC_POINT_is_at_infinity(group, point))
		return 1;
	
	if (ctx == NULL)
		{
		ctx = new_ctx = BN_CTX_new();
		if (ctx == NULL)
			return 0;
		}

	BN_CTX_start(ctx);
	x = BN_CTX_get(ctx);
	y = BN_CTX_get(ctx);
	if (y == NULL) goto err;
	
	if (!EC_POINT_get_affine_coordinates_GF2m(group, point, x, y, ctx)) goto err;
	if (!BN_copy(&point->X, x)) goto err;
	if (!BN_copy(&point->Y, y)) goto err;
	if (!BN_one(&point->Z)) goto err;
	
	ret = 1;		

  err:
	if (ctx) BN_CTX_end(ctx);
	if (new_ctx) BN_CTX_free(new_ctx);
	return ret;
	}

开发者ID:vmlemon，项目名称:OpenBSD-lib-patches，代码行数:34，代码来源:ec2_smpl.c

示例4: ec_GF2m_simple_cmp

/*-
 * Indicates whether two points are equal.
 * Return values:
 *  -1   error
 *   0   equal (in affine coordinates)
 *   1   not equal
 */
int ec_GF2m_simple_cmp(const EC_GROUP *group, const EC_POINT *a,
                       const EC_POINT *b, BN_CTX *ctx)
{
    BIGNUM *aX, *aY, *bX, *bY;
    BN_CTX *new_ctx = NULL;
    int ret = -1;

    if (EC_POINT_is_at_infinity(group, a)) {
        return EC_POINT_is_at_infinity(group, b) ? 0 : 1;
    }

    if (EC_POINT_is_at_infinity(group, b))
        return 1;

    if (a->Z_is_one && b->Z_is_one) {
        return ((BN_cmp(&a->X, &b->X) == 0)
                && BN_cmp(&a->Y, &b->Y) == 0) ? 0 : 1;
    }

    if (ctx == NULL) {
        ctx = new_ctx = BN_CTX_new();
        if (ctx == NULL)
            return -1;
    }

    BN_CTX_start(ctx);
    aX = BN_CTX_get(ctx);
    aY = BN_CTX_get(ctx);
    bX = BN_CTX_get(ctx);
    bY = BN_CTX_get(ctx);
    if (bY == NULL)
        goto err;

    if (!EC_POINT_get_affine_coordinates_GF2m(group, a, aX, aY, ctx))
        goto err;
    if (!EC_POINT_get_affine_coordinates_GF2m(group, b, bX, bY, ctx))
        goto err;
    ret = ((BN_cmp(aX, bX) == 0) && BN_cmp(aY, bY) == 0) ? 0 : 1;

 err:
    if (ctx)
        BN_CTX_end(ctx);
    if (new_ctx)
        BN_CTX_free(new_ctx);
    return ret;
}

开发者ID:commshare，项目名称:testST，代码行数:53，代码来源:ec2_smpl.c

示例5: LOG_FUNC

Handle<JwkEc> JwkEc::From(Handle<ScopedEVP_PKEY> pkey, int &key_type) {
	LOG_FUNC();

	LOG_INFO("Check key_type");
	if (!(key_type == NODESSL_KT_PRIVATE || key_type == NODESSL_KT_PUBLIC)) {
		THROW_ERROR("Wrong value of key_type");
	}

	LOG_INFO("Check pkey");
	if (pkey == nullptr) {
		THROW_ERROR("Key value is nullptr");
	}
	if (pkey->Get()->type != EVP_PKEY_EC) {
		THROW_ERROR("Key is not EC type");
	}

	LOG_INFO("Create JWK Object");
	Handle<JwkEc> jwk(new JwkEc());

	EC_KEY *ec = nullptr;
	const EC_POINT *point = nullptr;

	ScopedBN_CTX ctx(nullptr);
	const EC_GROUP *group = nullptr;

	LOG_INFO("Convert EC to JWK");
	ec = pkey->Get()->pkey.ec;

	point = EC_KEY_get0_public_key(const_cast<const EC_KEY*>(ec));
	group = EC_KEY_get0_group(ec);
	ctx = BN_CTX_new();

	LOG_INFO("Get curve name");
	jwk->crv = EC_GROUP_get_curve_name(group);

	ScopedBIGNUM x, y;
	x = BN_CTX_get(ctx.Get());
	y = BN_CTX_get(ctx.Get());

	LOG_INFO("Get public key");
	if (1 != EC_POINT_get_affine_coordinates_GF2m(group, point, x.Get(), y.Get(), ctx.Get())) {
		THROW_OPENSSL("EC_POINT_get_affine_coordinates_GF2m");
	}
	jwk->x = BN_dup(x.Get());
	jwk->y = BN_dup(y.Get());

	if (key_type == NODESSL_KT_PRIVATE) {
		const BIGNUM *d = EC_KEY_get0_private_key(const_cast<const EC_KEY*>(ec));
		jwk->d = BN_dup(d);
		if (jwk->d.isEmpty()) {
			THROW_OPENSSL("EC_KEY_get0_private_key");
		}
	}
	
	return jwk;
}

开发者ID:Seikho，项目名称:node-webcrypto-ossl，代码行数:56，代码来源:ec_jwk.cpp

示例6: test_ecdh_curve

static int test_ecdh_curve(int nid, const char *text, BN_CTX *ctx, BIO *out)
{
    EC_KEY *a = NULL;
    EC_KEY *b = NULL;
    BIGNUM *x_a = NULL, *y_a = NULL, *x_b = NULL, *y_b = NULL;
    char buf[12];
    unsigned char *abuf = NULL, *bbuf = NULL;
    int i, alen, blen, aout, bout, ret = 0;
    const EC_GROUP *group;

    a = EC_KEY_new_by_curve_name(nid);
    b = EC_KEY_new_by_curve_name(nid);
    if (a == NULL || b == NULL)
        goto err;

    group = EC_KEY_get0_group(a);

    if ((x_a = BN_new()) == NULL)
        goto err;
    if ((y_a = BN_new()) == NULL)
        goto err;
    if ((x_b = BN_new()) == NULL)
        goto err;
    if ((y_b = BN_new()) == NULL)
        goto err;

    BIO_puts(out, "Testing key generation with ");
    BIO_puts(out, text);
# ifdef NOISY
    BIO_puts(out, "\n");
# else
    (void)BIO_flush(out);
# endif

    if (!EC_KEY_generate_key(a))
        goto err;

    if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) ==
        NID_X9_62_prime_field) {
        if (!EC_POINT_get_affine_coordinates_GFp
            (group, EC_KEY_get0_public_key(a), x_a, y_a, ctx))
            goto err;
    }
# ifndef OPENSSL_NO_EC2M
    else {
        if (!EC_POINT_get_affine_coordinates_GF2m(group,
                                                  EC_KEY_get0_public_key(a),
                                                  x_a, y_a, ctx))
            goto err;
    }
# endif
# ifdef NOISY
    BIO_puts(out, "  pri 1=");
    BN_print(out, a->priv_key);
    BIO_puts(out, "\n  pub 1=");
    BN_print(out, x_a);
    BIO_puts(out, ",");
    BN_print(out, y_a);
    BIO_puts(out, "\n");
# else
    BIO_printf(out, " .");
    (void)BIO_flush(out);
# endif

    if (!EC_KEY_generate_key(b))
        goto err;

    if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) ==
        NID_X9_62_prime_field) {
        if (!EC_POINT_get_affine_coordinates_GFp
            (group, EC_KEY_get0_public_key(b), x_b, y_b, ctx))
            goto err;
    }
# ifndef OPENSSL_NO_EC2M
    else {
        if (!EC_POINT_get_affine_coordinates_GF2m(group,
                                                  EC_KEY_get0_public_key(b),
                                                  x_b, y_b, ctx))
            goto err;
    }
# endif

# ifdef NOISY
    BIO_puts(out, "  pri 2=");
    BN_print(out, b->priv_key);
    BIO_puts(out, "\n  pub 2=");
    BN_print(out, x_b);
    BIO_puts(out, ",");
    BN_print(out, y_b);
    BIO_puts(out, "\n");
# else
    BIO_printf(out, ".");
    (void)BIO_flush(out);
# endif

    alen = KDF1_SHA1_len;
    abuf = (unsigned char *)OPENSSL_malloc(alen);
    aout =
        ECDH_compute_key(abuf, alen, EC_KEY_get0_public_key(b), a, KDF1_SHA1);

//.........这里部分代码省略.........

开发者ID:derekmarcotte，项目名称:freebsd，代码行数:101，代码来源:ecdhtest.c

示例7: ecdsa_sign_setup

static int ecdsa_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in, BIGNUM **kinvp,
		BIGNUM **rp)
{
	BN_CTX   *ctx = NULL;
	BIGNUM	 *k = NULL, *r = NULL, *order = NULL, *X = NULL;
	EC_POINT *tmp_point=NULL;
	const EC_GROUP *group;
	int 	 ret = 0;

	if (eckey == NULL || (group = EC_KEY_get0_group(eckey)) == NULL)
	{
		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_PASSED_NULL_PARAMETER);
		return 0;
	}

	if (ctx_in == NULL) 
	{
		if ((ctx = BN_CTX_new()) == NULL)
		{
			ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_MALLOC_FAILURE);
			return 0;
		}
	}
	else
		ctx = ctx_in;

	k     = BN_new();	/* this value is later returned in *kinvp */
	r     = BN_new();	/* this value is later returned in *rp    */
	order = BN_new();
	X     = BN_new();
	if (!k || !r || !order || !X)
	{
		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_MALLOC_FAILURE);
		goto err;
	}
	if ((tmp_point = EC_POINT_new(group)) == NULL)
	{
		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
		goto err;
	}
	if (!EC_GROUP_get_order(group, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
		goto err;
	}
	
	do
	{
		/* get random k */	
		do
			if (!BN_rand_range(k, order))
			{
				ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,
				 ECDSA_R_RANDOM_NUMBER_GENERATION_FAILED);	
				goto err;
			}
		while (BN_is_zero(k));

		/* compute r the x-coordinate of generator * k */
		if (!EC_POINT_mul(group, tmp_point, k, NULL, NULL, ctx))
		{
			ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
			goto err;
		}
		if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
		{
			if (!EC_POINT_get_affine_coordinates_GFp(group,
				tmp_point, X, NULL, ctx))
			{
				ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
				goto err;
			}
		}
		else /* NID_X9_62_characteristic_two_field */
		{
			if (!EC_POINT_get_affine_coordinates_GF2m(group,
				tmp_point, X, NULL, ctx))
			{
				ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
				goto err;
			}
		}
		if (!BN_nnmod(r, X, order, ctx))
		{
			ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_BN_LIB);
			goto err;
		}
	}
	while (BN_is_zero(r));

	/* compute the inverse of k */
	if (!BN_mod_inverse(k, k, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_BN_LIB);
		goto err;	
	}
	/* clear old values if necessary */
	if (*rp != NULL)
		BN_clear_free(*rp);
	if (*kinvp != NULL) 
//.........这里部分代码省略.........

开发者ID:12019，项目名称:vendor_st-ericsson_u8500，代码行数:101，代码来源:ecs_ossl.c

示例8: ecdsa_do_verify


//.........这里部分代码省略.........
		goto err;
	}
	
	if (!EC_GROUP_get_order(group, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
		goto err;
	}
	if (8 * dgst_len > BN_num_bits(order))
	{
		/* XXX
		 * 
		 * Should provide for optional hash truncation:
		 * Keep the BN_num_bits(order) leftmost bits of dgst
		 * (see March 2006 FIPS 186-3 draft, which has a few
		 * confusing errors in this part though)
		 */

		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY,
			ECDSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
		ret = 0;
		goto err;
	}

	if (BN_is_zero(sig->r)          || BN_is_negative(sig->r) || 
	    BN_ucmp(sig->r, order) >= 0 || BN_is_zero(sig->s)  ||
	    BN_is_negative(sig->s)      || BN_ucmp(sig->s, order) >= 0)
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ECDSA_R_BAD_SIGNATURE);
		ret = 0;	/* signature is invalid */
		goto err;
	}
	/* calculate tmp1 = inv(S) mod order */
	if (!BN_mod_inverse(u2, sig->s, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/* digest -> m */
	if (!BN_bin2bn(dgst, dgst_len, m))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/* u1 = m * tmp mod order */
	if (!BN_mod_mul(u1, m, u2, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/* u2 = r * w mod q */
	if (!BN_mod_mul(u2, sig->r, u2, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}

	if ((point = EC_POINT_new(group)) == NULL)
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
		goto err;
	}
	if (!EC_POINT_mul(group, point, u1, pub_key, u2, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
		goto err;
	}
	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
	{
		if (!EC_POINT_get_affine_coordinates_GFp(group,
			point, X, NULL, ctx))
		{
			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
			goto err;
		}
	}
	else /* NID_X9_62_characteristic_two_field */
	{
		if (!EC_POINT_get_affine_coordinates_GF2m(group,
			point, X, NULL, ctx))
		{
			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
			goto err;
		}
	}
	
	if (!BN_nnmod(u1, X, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/*  if the signature is correct u1 is equal to sig->r */
	ret = (BN_ucmp(u1, sig->r) == 0);
err:
	BN_CTX_end(ctx);
	BN_CTX_free(ctx);
	if (point)
		EC_POINT_free(point);
	return ret;
}

开发者ID:LucidOne，项目名称:Rovio，代码行数:101，代码来源:ecs_ossl.c

示例9: SM2err


//.........这里部分代码省略.........
		ECerr(EC_F_SM2_DO_ENCRYPT, EC_R_ERROR);
		goto end;
	}

	nbytes = (EC_GROUP_get_degree(group) + 7) / 8;

	/* check [h]P_B != O */
	if (!EC_POINT_mul(group, share_point, NULL, pub_key, h, bn_ctx)) {
		SM2err(SM2_F_SM2_DO_ENCRYPT, ERR_R_EC_LIB);
		goto end;
	}

	if (EC_POINT_is_at_infinity(group, share_point)) {
		SM2err(SM2_F_SM2_DO_ENCRYPT, SM2_R_INVALID_PUBLIC_KEY);
		goto end;
	}

	do
	{
		size_t size;

		/* rand k in [1, n-1] */
		do {
			BN_rand_range(k, n);
		} while (BN_is_zero(k));

		/* compute ephem_point [k]G = (x1, y1) */
		if (!EC_POINT_mul(group, ephem_point, k, NULL, NULL, bn_ctx)) {
			SM2err(SM2_F_SM2_DO_ENCRYPT, ERR_R_EC_LIB);
			goto end;
		}

		/* compute ECDH share_point [k]P_B = (x2, y2) */
		if (!EC_POINT_mul(group, share_point, NULL, pub_key, k, bn_ctx)) {
			SM2err(SM2_F_SM2_DO_ENCRYPT, ERR_R_EC_LIB);
			goto end;
		}

		/* compute t = KDF(x2 || y2, klen) */
		if (!(len = EC_POINT_point2oct(group, share_point,
			POINT_CONVERSION_UNCOMPRESSED, buf, sizeof(buf), bn_ctx))) {
			SM2err(SM2_F_SM2_DO_ENCRYPT, ERR_R_EC_LIB);
			goto end;
		}

		size = cv->ciphertext->length;
		kdf(buf + 1, len - 1, cv->ciphertext->data, &size);
		if (size != inlen) {
			SM2err(SM2_F_SM2_DO_ENCRYPT, SM2_R_KDF_FAILURE);
			goto end;
		}

		/* ASN1_OCTET_STRING_is_zero in asn1.h and a_octet.c */
	} while (ASN1_OCTET_STRING_is_zero(cv->ciphertext));

	/* set x/yCoordinates as (x1, y1) */
	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field) {
		if (!EC_POINT_get_affine_coordinates_GFp(group, ephem_point,
			cv->xCoordinate, cv->yCoordinate, bn_ctx)) {
			SM2err(SM2_F_SM2_DO_ENCRYPT, ERR_R_EC_LIB);
			goto end;
		}
	} else {
		if (!EC_POINT_get_affine_coordinates_GF2m(group, ephem_point,
			cv->xCoordinate, cv->yCoordinate, bn_ctx)) {
			SM2err(SM2_F_SM2_DO_ENCRYPT, ERR_R_EC_LIB);
			goto end;
		}
	}

	/* ciphertext = t xor in */
	for (i = 0; i < inlen; i++) {
		cv->ciphertext->data[i] ^= in[i];
	}

	/* generate hash = Hash(x2 || M || y2) */
	hashlen = cv->hash->length;
	if (!EVP_DigestInit_ex(md_ctx, md, NULL)
		|| !EVP_DigestUpdate(md_ctx, buf + 1, nbytes)
		|| !EVP_DigestUpdate(md_ctx, in, inlen)
		|| !EVP_DigestUpdate(md_ctx, buf + 1 + nbytes, nbytes)
		|| !EVP_DigestFinal_ex(md_ctx, cv->hash->data, &hashlen)) {
		SM2err(SM2_F_SM2_DO_ENCRYPT, ERR_R_EVP_LIB);
		goto end;
	}

	ret = cv;
	cv = NULL;

end:
	SM2CiphertextValue_free(cv);
	EC_POINT_free(share_point);
	EC_POINT_free(ephem_point);
	BN_free(n);
	BN_free(h);
	BN_clear_free(k);
	BN_CTX_free(bn_ctx);
	EVP_MD_CTX_free(md_ctx);
	return ret;
}

开发者ID:winstard，项目名称:GmSSL，代码行数:101，代码来源:sm2_enc.c

示例10: ecdh_compute_key

/* This implementation is based on the following primitives in the IEEE 1363 standard:
 *  - ECKAS-DH1
 *  - ECSVDP-DH
 * Finally an optional KDF is applied.
 */
static int ecdh_compute_key(void *out, size_t outlen, const EC_POINT *pub_key,
	EC_KEY *ecdh,
	void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen))
	{
	BN_CTX *ctx;
	EC_POINT *tmp=NULL;
	BIGNUM *x=NULL, *y=NULL;
	const BIGNUM *priv_key;
	const EC_GROUP* group;
	int ret= -1;
	size_t buflen, len;
	unsigned char *buf=NULL;

	if (outlen > INT_MAX)
		{
		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE); /* sort of, anyway */
		return -1;
		}

	if ((ctx = BN_CTX_new()) == NULL) goto err;
	BN_CTX_start(ctx);
	x = BN_CTX_get(ctx);
	y = BN_CTX_get(ctx);
	
	priv_key = EC_KEY_get0_private_key(ecdh);
	if (priv_key == NULL)
		{
		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_NO_PRIVATE_VALUE);
		goto err;
		}

	group = EC_KEY_get0_group(ecdh);
	if ((tmp=EC_POINT_new(group)) == NULL)
		{
		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE);
		goto err;
		}

	if (!EC_POINT_mul(group, tmp, NULL, pub_key, priv_key, ctx)) 
		{
		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
		goto err;
		}
		
	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field) 
		{
		if (!EC_POINT_get_affine_coordinates_GFp(group, tmp, x, y, ctx)) 
			{
			ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
			goto err;
			}
		}
#ifndef OPENSSL_NO_EC2M
	else
		{
		if (!EC_POINT_get_affine_coordinates_GF2m(group, tmp, x, y, ctx)) 
			{
			ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
			goto err;
			}
		}
#endif

	buflen = (EC_GROUP_get_degree(group) + 7)/8;
	len = BN_num_bytes(x);
	if (len > buflen)
		{
		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_INTERNAL_ERROR);
		goto err;
		}
	if ((buf = malloc(buflen)) == NULL)
		{
		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE);
		goto err;
		}
	
	memset(buf, 0, buflen - len);
	if (len != (size_t)BN_bn2bin(x, buf + buflen - len))
		{
		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_BN_LIB);
		goto err;
		}

	if (KDF != 0)
		{
		if (KDF(buf, buflen, out, &outlen) == NULL)
			{
			ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_KDF_FAILED);
			goto err;
			}
		ret = outlen;
		}
	else
		{
		/* no KDF, just copy as much as we can */
//.........这里部分代码省略.........

开发者ID:Basskrapfen，项目名称:openbsd，代码行数:101，代码来源:ech_ossl.c

示例11: char2_field_tests

void char2_field_tests()
	{	
	BN_CTX *ctx = NULL;
	BIGNUM *p, *a, *b;
	EC_GROUP *group;
	EC_GROUP *C2_K163 = NULL, *C2_K233 = NULL, *C2_K283 = NULL, *C2_K409 = NULL, *C2_K571 = NULL;
	EC_GROUP *C2_B163 = NULL, *C2_B233 = NULL, *C2_B283 = NULL, *C2_B409 = NULL, *C2_B571 = NULL;
	EC_POINT *P, *Q, *R;
	BIGNUM *x, *y, *z, *cof;
	unsigned char buf[100];
	size_t i, len;
	int k;
	
#if 1 /* optional */
	ctx = BN_CTX_new();
	if (!ctx) ABORT;
#endif

	p = BN_new();
	a = BN_new();
	b = BN_new();
	if (!p || !a || !b) ABORT;

	if (!BN_hex2bn(&p, "13")) ABORT;
	if (!BN_hex2bn(&a, "3")) ABORT;
	if (!BN_hex2bn(&b, "1")) ABORT;
	
	group = EC_GROUP_new(EC_GF2m_simple_method()); /* applications should use EC_GROUP_new_curve_GF2m
	                                                * so that the library gets to choose the EC_METHOD */
	if (!group) ABORT;
	if (!EC_GROUP_set_curve_GF2m(group, p, a, b, ctx)) ABORT;

	{
		EC_GROUP *tmp;
		tmp = EC_GROUP_new(EC_GROUP_method_of(group));
		if (!tmp) ABORT;
		if (!EC_GROUP_copy(tmp, group)) ABORT;
		EC_GROUP_free(group);
		group = tmp;
	}
	
	if (!EC_GROUP_get_curve_GF2m(group, p, a, b, ctx)) ABORT;

	fprintf(stdout, "Curve defined by Weierstrass equation\n     y^2 + x*y = x^3 + a*x^2 + b  (mod 0x");
	BN_print_fp(stdout, p);
	fprintf(stdout, ")\n     a = 0x");
	BN_print_fp(stdout, a);
	fprintf(stdout, "\n     b = 0x");
	BN_print_fp(stdout, b);
	fprintf(stdout, "\n(0x... means binary polynomial)\n");

	P = EC_POINT_new(group);
	Q = EC_POINT_new(group);
	R = EC_POINT_new(group);
	if (!P || !Q || !R) ABORT;
	
	if (!EC_POINT_set_to_infinity(group, P)) ABORT;
	if (!EC_POINT_is_at_infinity(group, P)) ABORT;

	buf[0] = 0;
	if (!EC_POINT_oct2point(group, Q, buf, 1, ctx)) ABORT;

	if (!EC_POINT_add(group, P, P, Q, ctx)) ABORT;
	if (!EC_POINT_is_at_infinity(group, P)) ABORT;

	x = BN_new();
	y = BN_new();
	z = BN_new();
	cof = BN_new();
	if (!x || !y || !z || !cof) ABORT;

	if (!BN_hex2bn(&x, "6")) ABORT;
/* Change test based on whether binary point compression is enabled or not. */
#ifdef OPENSSL_EC_BIN_PT_COMP
	if (!EC_POINT_set_compressed_coordinates_GF2m(group, Q, x, 1, ctx)) ABORT;
#else
	if (!BN_hex2bn(&y, "8")) ABORT;
	if (!EC_POINT_set_affine_coordinates_GF2m(group, Q, x, y, ctx)) ABORT;
#endif
	if (!EC_POINT_is_on_curve(group, Q, ctx))
		{
/* Change test based on whether binary point compression is enabled or not. */
#ifdef OPENSSL_EC_BIN_PT_COMP
		if (!EC_POINT_get_affine_coordinates_GF2m(group, Q, x, y, ctx)) ABORT;
#endif
		fprintf(stderr, "Point is not on curve: x = 0x");
		BN_print_fp(stderr, x);
		fprintf(stderr, ", y = 0x");
		BN_print_fp(stderr, y);
		fprintf(stderr, "\n");
		ABORT;
		}

	fprintf(stdout, "A cyclic subgroup:\n");
	k = 100;
	do
		{
		if (k-- == 0) ABORT;

		if (EC_POINT_is_at_infinity(group, P))
//.........这里部分代码省略.........

开发者ID:174high，项目名称:openssl-0.9.8e_linux_porting，代码行数:101，代码来源:ectest.c

示例12: ec_GF2m_simple_add

/*
 * Computes a + b and stores the result in r.  r could be a or b, a could be
 * b. Uses algorithm A.10.2 of IEEE P1363.
 */
int ec_GF2m_simple_add(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a,
                       const EC_POINT *b, BN_CTX *ctx)
{
    BN_CTX *new_ctx = NULL;
    BIGNUM *x0, *y0, *x1, *y1, *x2, *y2, *s, *t;
    int ret = 0;

    if (EC_POINT_is_at_infinity(group, a)) {
        if (!EC_POINT_copy(r, b))
            return 0;
        return 1;
    }

    if (EC_POINT_is_at_infinity(group, b)) {
        if (!EC_POINT_copy(r, a))
            return 0;
        return 1;
    }

    if (ctx == NULL) {
        ctx = new_ctx = BN_CTX_new();
        if (ctx == NULL)
            return 0;
    }

    BN_CTX_start(ctx);
    x0 = BN_CTX_get(ctx);
    y0 = BN_CTX_get(ctx);
    x1 = BN_CTX_get(ctx);
    y1 = BN_CTX_get(ctx);
    x2 = BN_CTX_get(ctx);
    y2 = BN_CTX_get(ctx);
    s = BN_CTX_get(ctx);
    t = BN_CTX_get(ctx);
    if (t == NULL)
        goto err;

    if (a->Z_is_one) {
        if (!BN_copy(x0, &a->X))
            goto err;
        if (!BN_copy(y0, &a->Y))
            goto err;
    } else {
        if (!EC_POINT_get_affine_coordinates_GF2m(group, a, x0, y0, ctx))
            goto err;
    }
    if (b->Z_is_one) {
        if (!BN_copy(x1, &b->X))
            goto err;
        if (!BN_copy(y1, &b->Y))
            goto err;
    } else {
        if (!EC_POINT_get_affine_coordinates_GF2m(group, b, x1, y1, ctx))
            goto err;
    }

    if (BN_GF2m_cmp(x0, x1)) {
        if (!BN_GF2m_add(t, x0, x1))
            goto err;
        if (!BN_GF2m_add(s, y0, y1))
            goto err;
        if (!group->meth->field_div(group, s, s, t, ctx))
            goto err;
        if (!group->meth->field_sqr(group, x2, s, ctx))
            goto err;
        if (!BN_GF2m_add(x2, x2, &group->a))
            goto err;
        if (!BN_GF2m_add(x2, x2, s))
            goto err;
        if (!BN_GF2m_add(x2, x2, t))
            goto err;
    } else {
        if (BN_GF2m_cmp(y0, y1) || BN_is_zero(x1)) {
            if (!EC_POINT_set_to_infinity(group, r))
                goto err;
            ret = 1;
            goto err;
        }
        if (!group->meth->field_div(group, s, y1, x1, ctx))
            goto err;
        if (!BN_GF2m_add(s, s, x1))
            goto err;

        if (!group->meth->field_sqr(group, x2, s, ctx))
            goto err;
        if (!BN_GF2m_add(x2, x2, s))
            goto err;
        if (!BN_GF2m_add(x2, x2, &group->a))
            goto err;
    }

    if (!BN_GF2m_add(y2, x1, x2))
        goto err;
    if (!group->meth->field_mul(group, y2, y2, s, ctx))
        goto err;
    if (!BN_GF2m_add(y2, y2, x2))
//.........这里部分代码省略.........

开发者ID:commshare，项目名称:testST，代码行数:101，代码来源:ec2_smpl.c

示例13: eccVerifySignature


//.........这里部分代码省略.........

	ctx = BN_CTX_new();
	order = BN_new();
	e = BN_new();
	t = BN_new();

	if (!ctx || !order || !e || !t) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
		goto err;
	}
	if (!EC_GROUP_get_order(ec_group, order, ctx)) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
		goto err;
	}

	/* check r, s in [1, n-1] and r + s != 0 (mod n) */ 
	if (BN_is_zero(r) ||
		BN_is_negative(r) ||
		BN_ucmp(r, order) >= 0 || 
		BN_is_zero(s) ||
		BN_is_negative(s) || 
		BN_ucmp(s, order) >= 0) {

			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ECDSA_R_BAD_SIGNATURE);
			ret = 0;
			goto err;
	}

	/* check t = r + s != 0 */
	if (!BN_mod_add(t, r, s, order, ctx)) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	if (BN_is_zero(t)) {
		ret = 0;
		goto err;
	}

	/* convert digest to e */
	i = BN_num_bits(order);
#if 0
	if (8 * dgstlen > i) {
		dgstlen = (i + 7)/8;
	}
#endif
	if (!BN_bin2bn(rgbHashData, 32, e)) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
#if 0
	if ((8 * dgstlen > i) && !BN_rshift(e, e, 8 - (i & 0x7))) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
#endif

	/* compute (x, y) = sG + tP, P is pub_key */
	if (!(point = EC_POINT_new(ec_group))) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
		goto err;
	}
	if (!EC_POINT_mul(ec_group, point, s, pub_key, t, ctx)) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
		goto err;
	}
	if (EC_METHOD_get_field_type(EC_GROUP_method_of(ec_group)) == NID_X9_62_prime_field) {
		if (!EC_POINT_get_affine_coordinates_GFp(ec_group, point, t, NULL, ctx)) {
			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
			goto err;
		}
	} else /* NID_X9_62_characteristic_two_field */ { 
		if (!EC_POINT_get_affine_coordinates_GF2m(ec_group, point, t, NULL, ctx)) {
			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
			goto err;
		}
	}
	if (!BN_nnmod(t, t, order, ctx)) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}

	/* check (sG + tP).x + e  == sig.r */
	if (!BN_mod_add(t, t, e, order, ctx)) {
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	if (BN_ucmp(t, r) == 0) {
		ret = SM2_VERIFY_SUCCESS;
	} else {
		ret = SM2_VERIFY_FAILED;
	}

err:
	if (point) EC_POINT_free(point);
	if (order) BN_free(order);
	if (e) BN_free(e);
	if (t) BN_free(t);
	if (ctx) BN_CTX_free(ctx);
	return 0;
}

开发者ID:chanuei，项目名称:dmverify-analysis，代码行数:101，代码来源:Tcm_crypto.cpp

示例14: ecdsa_do_verify


//.........这里部分代码省略.........
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	
	if (!EC_GROUP_get_order(group, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
		goto err;
	}

	if (BN_is_zero(sig->r)          || BN_is_negative(sig->r) || 
	    BN_ucmp(sig->r, order) >= 0 || BN_is_zero(sig->s)  ||
	    BN_is_negative(sig->s)      || BN_ucmp(sig->s, order) >= 0)
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ECDSA_R_BAD_SIGNATURE);
		ret = 0;	/* signature is invalid */
		goto err;
	}
	/* calculate tmp1 = inv(S) mod order */
	if (!BN_mod_inverse(u2, sig->s, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/* digest -> m */
	i = BN_num_bits(order);
	/* Need to truncate digest if it is too long: first truncate whole
	 * bytes.
	 */
	if (8 * dgst_len > i)
		dgst_len = (i + 7)/8;
	if (!BN_bin2bn(dgst, dgst_len, m))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/* If still too long truncate remaining bits with a shift */
	if ((8 * dgst_len > i) && !BN_rshift(m, m, 8 - (i & 0x7)))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/* u1 = m * tmp mod order */
	if (!BN_mod_mul(u1, m, u2, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/* u2 = r * w mod q */
	if (!BN_mod_mul(u2, sig->r, u2, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}

	if ((point = EC_POINT_new(group)) == NULL)
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
		goto err;
	}
	if (!EC_POINT_mul(group, point, u1, pub_key, u2, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
		goto err;
	}
	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
	{
		if (!EC_POINT_get_affine_coordinates_GFp(group,
			point, X, NULL, ctx))
		{
			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
			goto err;
		}
	}
#ifndef OPENSSL_NO_EC2M
	else /* NID_X9_62_characteristic_two_field */
	{
		if (!EC_POINT_get_affine_coordinates_GF2m(group,
			point, X, NULL, ctx))
		{
			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
			goto err;
		}
	}
#endif	
	if (!BN_nnmod(u1, X, order, ctx))
	{
		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
		goto err;
	}
	/*  if the signature is correct u1 is equal to sig->r */
	ret = (BN_ucmp(u1, sig->r) == 0);
err:
	BN_CTX_end(ctx);
	BN_CTX_free(ctx);
	if (point)
		EC_POINT_free(point);
	return ret;
}

开发者ID:izick，项目名称:eme，代码行数:101，代码来源:ecs_ossl.c

示例15: compute_key

static int compute_key(void *out, size_t outlen,
	const EC_POINT *pub_key, EC_KEY *ecdh,
	void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen))
{
	const EC_GROUP* group;
	int ret;

	group = EC_KEY_get0_group(ecdh);

	// only use our solution if the curve name is SECT163K1
	if (EC_GROUP_get_curve_name(group) == NID_sect163k1) {
		const BIGNUM* rkey;
		BN_CTX *ctx;
		BIGNUM* x, *y;
		mm256_point_t p, q;
		mm_256 mkey;
		int r;

		ctx = BN_CTX_new();
		BN_CTX_start(ctx);

		x = BN_CTX_get(ctx);
		y = BN_CTX_get(ctx);

		rkey = EC_KEY_get0_private_key(ecdh);
		memset(&mkey, 0, sizeof(mkey));
		memcpy(&mkey, rkey->d, sizeof(rkey->d[0]) * rkey->top);
		ec2m_import_key(&mkey);

		r = EC_POINT_get_affine_coordinates_GF2m(group, pub_key, x, y, ctx);
		memset(&p, 0, sizeof(p));
		memcpy(&p.x, x->d, sizeof(x->d[0]) * x->top);
		memcpy(&p.y, y->d, sizeof(y->d[0]) * y->top);
		p.z.iv[0] = 1;

		r = ec2m_private_operation(&p, &q);
		if (r < 0) {
			fprintf(stderr, "invalid result: %d\n", r);
		}

		int xlen = (163 + 7) / 8; 
		if (KDF != 0)
		{
			if (KDF(&q.x, xlen, out, &outlen) == NULL)
			{
				return -1;
			}
			ret = outlen;
		}
		else
		{
			/* no KDF, just copy as much as we can */
			if (outlen > xlen)
				outlen = xlen;
			memcpy(out, &q.x, outlen);
			ret = outlen;
		}

		BN_CTX_end(ctx);
		BN_CTX_free(ctx);

	} else {
		// use the default method
		const ECDH_METHOD* meth = ECDH_OpenSSL();
		return meth->compute_key(out, outlen, pub_key, ecdh, KDF);
	}

	return ret;
}

开发者ID:winstard，项目名称:GmSSL，代码行数:69，代码来源:cba_ecdh_engine.c

示例16: ecdh_simple_compute_key

/*-
 * This implementation is based on the following primitives in the IEEE 1363 standard:
 *  - ECKAS-DH1
 *  - ECSVDP-DH
 */
int ecdh_simple_compute_key(unsigned char **pout, size_t *poutlen,
                            const EC_POINT *pub_key, const EC_KEY *ecdh)
{
    BN_CTX *ctx;
    EC_POINT *tmp = NULL;
    BIGNUM *x = NULL, *y = NULL;
    const BIGNUM *priv_key;
    const EC_GROUP *group;
    int ret = 0;
    size_t buflen, len;
    unsigned char *buf = NULL;

    if ((ctx = BN_CTX_new()) == NULL)
        goto err;
    BN_CTX_start(ctx);
    x = BN_CTX_get(ctx);
    y = BN_CTX_get(ctx);

    priv_key = EC_KEY_get0_private_key(ecdh);
    if (priv_key == NULL) {
        ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, EC_R_NO_PRIVATE_VALUE);
        goto err;
    }

    group = EC_KEY_get0_group(ecdh);

    if (EC_KEY_get_flags(ecdh) & EC_FLAG_COFACTOR_ECDH) {
        if (!EC_GROUP_get_cofactor(group, x, NULL) ||
            !BN_mul(x, x, priv_key, ctx)) {
            ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, ERR_R_MALLOC_FAILURE);
            goto err;
        }
        priv_key = x;
    }

    if ((tmp = EC_POINT_new(group)) == NULL) {
        ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, ERR_R_MALLOC_FAILURE);
        goto err;
    }

    if (!EC_POINT_mul(group, tmp, NULL, pub_key, priv_key, ctx)) {
        ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, EC_R_POINT_ARITHMETIC_FAILURE);
        goto err;
    }

    if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) ==
        NID_X9_62_prime_field) {
        if (!EC_POINT_get_affine_coordinates_GFp(group, tmp, x, y, ctx)) {
            ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, EC_R_POINT_ARITHMETIC_FAILURE);
            goto err;
        }
    }
#ifndef OPENSSL_NO_EC2M
    else {
        if (!EC_POINT_get_affine_coordinates_GF2m(group, tmp, x, y, ctx)) {
            ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, EC_R_POINT_ARITHMETIC_FAILURE);
            goto err;
        }
    }
#endif

    buflen = (EC_GROUP_get_degree(group) + 7) / 8;
    len = BN_num_bytes(x);
    if (len > buflen) {
        ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, ERR_R_INTERNAL_ERROR);
        goto err;
    }
    if ((buf = OPENSSL_malloc(buflen)) == NULL) {
        ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, ERR_R_MALLOC_FAILURE);
        goto err;
    }

    memset(buf, 0, buflen - len);
    if (len != (size_t)BN_bn2bin(x, buf + buflen - len)) {
        ECerr(EC_F_ECDH_SIMPLE_COMPUTE_KEY, ERR_R_BN_LIB);
        goto err;
    }

    *pout = buf;
    *poutlen = buflen;
    buf = NULL;

    ret = 1;

 err:
    EC_POINT_free(tmp);
    if (ctx)
        BN_CTX_end(ctx);
    BN_CTX_free(ctx);
    OPENSSL_free(buf);
    return ret;
}

开发者ID:277800076，项目名称:openssl，代码行数:97，代码来源:ecdh_ossl.c

示例17: main

int main(int argc, char *argv[]) {
	void *bb;
	BN_CTX *ctx = NULL;
	int nid;
	BIO *out;
	CRYPTO_malloc_debug_init();
	CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
	const char *text = "NIST Prime-Curve P-192";

#ifdef OPENSSL_SYS_WIN32
	CRYPTO_malloc_init();
#endif

	RAND_seed(rnd_seed, sizeof rnd_seed);
	out = BIO_new(BIO_s_file());
	if (out == NULL)
		EXIT(1);
	BIO_set_fp(out, stdout, BIO_NOCLOSE);

	if ((ctx = BN_CTX_new()) == NULL)
		goto err;
	nid = NID_X9_62_prime192v1;

	//EC_POINT *bb;
	EC_KEY *a = NULL;    //EC_KEY is a structure
	BIGNUM *x_a = NULL, *y_a = NULL;

	char buf[12];
	//unsigned char *abuf=NULL,*bbuf=NULL;
	int i, alen, blen, aout, bout;
	const EC_GROUP *group;

	a = EC_KEY_new_by_curve_name(nid);
	if (a == NULL)
		goto err;

	group = EC_KEY_get0_group(a);

	if ((x_a = BN_new()) == NULL)
		goto err;
	//BN_new returns a pointer to the bignum
	if ((y_a = BN_new()) == NULL)
		goto err;

	BIO_puts(out, "Testing key generation with ");
	BIO_puts(out, text);

	if (!EC_KEY_generate_key(a))
		goto err;
	printf("\n1 ) generating keys\n");

	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group))
			== NID_X9_62_prime_field) {
		if (!EC_POINT_get_affine_coordinates_GFp(group,
				EC_KEY_get0_public_key(a), x_a, y_a, ctx))
			goto err;
	}
	//returns the public key
	else {
		if (!EC_POINT_get_affine_coordinates_GF2m(group,
				EC_KEY_get0_public_key(a), x_a, y_a, ctx))
			goto err;
	}

	BIO_puts(out, "  pri 1=");
	BN_print(out, EC_KEY_get0_private_key(a));
	BIO_puts(out, "\n  pub 1=");
	BN_print(out, x_a);
	BIO_puts(out, ",");
	BN_print(out, y_a);
	BIO_puts(out, "\n");

	func(EC_KEY_get0_public_key(a));

	err: ERR_print_errors_fp(stderr);

	if (x_a)
		BN_free(x_a);
	if (y_a)
		BN_free(y_a);
	if (a)
		EC_KEY_free(a);
	if (ctx)
		BN_CTX_free(ctx);
	BIO_free(out);
	CRYPTO_cleanup_all_ex_data();
	ERR_remove_state(0);
	CRYPTO_mem_leaks_fp(stderr);
	return 0;

}

开发者ID:AIdrifter，项目名称:EllipticCurveCryptography，代码行数:92，代码来源:TestOne.c

示例18: main

	return NULL;
#endif
}

int main(void) {

	unsigned char *abuf = NULL;
	//const EC_POINT *public_key;
	int i, alen, aout, jj = 0;
	int sockfd, new_fd;  // listen on sock_fd, new connection on new_fd
	struct sockaddr_in my_addr;    // my address information
	struct sockaddr_in their_addr; // connector's address information
	socklen_t sin_size;
	int yes = 1, numbytes;
	char buf[MAXDATASIZE];
	/*//////////////////////////////////////////////////////////////Generating Keys/////////////////////////////////////*/

	BN_CTX *ctx = NULL;
	int nid;
	BIO *out;
	CRYPTO_malloc_debug_init();
	CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
	const char *text = "NIST Prime-Curve P-192";

#ifdef OPENSSL_SYS_WIN32
	CRYPTO_malloc_init();
#endif

	RAND_seed(rnd_seed, sizeof rnd_seed);
	out = BIO_new(BIO_s_file());
	if (out == NULL)
		EXIT(1);
	BIO_set_fp(out, stdout, BIO_NOCLOSE);

	if ((ctx = BN_CTX_new()) == NULL)
		goto err;
	nid = NID_X9_62_prime192v1;

	EC_KEY *a = NULL;    //EC_KEY is a structure
	BIGNUM *x_a = NULL, *y_a = NULL;
	const BIGNUM *BIG = NULL;
	char *buff;
	//unsigned char *abuf=NULL,*bbuf=NULL;

	const EC_GROUP *group;

	a = EC_KEY_new_by_curve_name(nid);
	if (a == NULL)
		goto err;

	group = EC_KEY_get0_group(a);
	//	aa=EC_POINT_new(group);

	if ((x_a = BN_new()) == NULL)
		goto err;
	//BN_new returns a pointer to the bignum
	if ((y_a = BN_new()) == NULL)
		goto err;
	//	if ((BIG=BN_new()) == NULL) goto err;

	BIO_puts(out, "Testing key generation with ");
	BIO_puts(out, text);

	if (!EC_KEY_generate_key(a))
		goto err;
	printf("\n1 ) generating keys\n");

	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group))
			== NID_X9_62_prime_field) {
		if (!EC_POINT_get_affine_coordinates_GFp(group,
				EC_KEY_get0_public_key(a), x_a, y_a, ctx))
			goto err;
	}
	//returns the public key
	else {
		if (!EC_POINT_get_affine_coordinates_GF2m(group,
				EC_KEY_get0_public_key(a), x_a, y_a, ctx))
			goto err;
	}

	BIO_puts(out, "  pri 1=");
	BN_print(out, EC_KEY_get0_private_key(a));
	BIO_puts(out, "\n  pub 1=");
	BN_print(out, x_a);
	BIO_puts(out, ",");
	BN_print(out, y_a);
	BIO_puts(out, "\n");

	/*
	 printf("importnt work\n");
	 //BN_print(out,x_a);
	 buff=BN_bn2dec(x_a);
	 printf("%s\n",buff);
	 BN_dec2bn(&(x_a),buff);
	 printf("%s\n",buff);
	 BN_print(out,x_a);
	 */

	/*//////////////////////////////////////////////////////////////////////////////////////////////////////////////////*/
//.........这里部分代码省略.........

开发者ID:AIdrifter，项目名称:EllipticCurveCryptography，代码行数:101，代码来源:Server.c

示例19: test_ecdh_curve

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ EC_POINT_is_at_infinity函数代码示例发布时间：2022-05-30

C++ EC_POINT_free函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19164|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服

地址：深圳市南山区西丽大学城创智工业园

电邮：jeky_zhao#qq.com

移动电话：139-2527-9053

客服电话

电子邮件

C++ EC_POINT_get_affine_coordinates_GF2m函数代码示例

示例1: MKEM_decode_message

示例2: ec_get_pubkey

示例3: ec_GF2m_simple_make_affine

示例4: ec_GF2m_simple_cmp

示例5: LOG_FUNC

示例6: test_ecdh_curve

示例7: ecdsa_sign_setup

示例8: ecdsa_do_verify

示例9: SM2err

示例10: ecdh_compute_key

示例11: char2_field_tests

示例12: ec_GF2m_simple_add

示例13: eccVerifySignature

示例14: ecdsa_do_verify

示例15: compute_key

示例16: ecdh_simple_compute_key

示例17: main

示例18: main

示例19: test_ecdh_curve

请发表评论

全部评论

上一篇：

下一篇：

kostub/iosMath: Beautiful math equation

pallet/zi: Maven plugin for clojure

CVE-2022-38625

jonathantribouharet/JTMaterialTransition

CVE-2022-28200

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053