本文整理汇总了C++中EC_METHOD_get_field_type函数的典型用法代码示例。如果您正苦于以下问题：C++ EC_METHOD_get_field_type函数的具体用法？C++ EC_METHOD_get_field_type怎么用？C++ EC_METHOD_get_field_type使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了EC_METHOD_get_field_type函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ec_get_pubkey
static int ec_get_pubkey(EC_KEY *key, BIGNUM *x, BIGNUM *y)
{
const EC_POINT *pt;
const EC_GROUP *grp;
const EC_METHOD *meth;
int rv;
BN_CTX *ctx;
ctx = BN_CTX_new();
if (!ctx)
return 0;
grp = EC_KEY_get0_group(key);
pt = EC_KEY_get0_public_key(key);
meth = EC_GROUP_method_of(grp);
if (EC_METHOD_get_field_type(meth) == NID_X9_62_prime_field)
rv = EC_POINT_get_affine_coordinates_GFp(grp, pt, x, y, ctx);
else
# ifdef OPENSSL_NO_EC2M
{
fprintf(stderr, "ERROR: GF2m not supported\n");
exit(1);
}
# else
rv = EC_POINT_get_affine_coordinates_GF2m(grp, pt, x, y, ctx);
# endif
BN_CTX_free(ctx);
return rv;
}
开发者ID:davidlt，项目名称:openssl-fedora，代码行数:30，代码来源:fips_ecdsavs.c
示例2: EC_GROUP_get_pentanomial_basis
int EC_GROUP_get_pentanomial_basis(const EC_GROUP *group, unsigned int *k1,
unsigned int *k2, unsigned int *k3)
{
if (group == NULL)
return 0;
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) !=
NID_X9_62_characteristic_two_field
|| !((group->poly[0] != 0) && (group->poly[1] != 0)
&& (group->poly[2] != 0) && (group->poly[3] != 0)
&& (group->poly[4] == 0))) {
ECerr(EC_F_EC_GROUP_GET_PENTANOMIAL_BASIS,
ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
return 0;
}
if (k1)
*k1 = group->poly[3];
if (k2)
*k2 = group->poly[2];
if (k3)
*k3 = group->poly[1];
return 1;
}
开发者ID:swipetospin，项目名称:openssl，代码行数:25，代码来源:ec_asn1.c
示例3: EC_GROUP_get_trinomial_basis
int
EC_GROUP_get_trinomial_basis(const EC_GROUP * group, unsigned int *k)
{
if (group == NULL)
return 0;
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) !=
NID_X9_62_characteristic_two_field
|| !((group->poly[0] != 0) && (group->poly[1] != 0) && (group->poly[2] == 0))) {
ECerr(EC_F_EC_GROUP_GET_TRINOMIAL_BASIS, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
return 0;
}
if (k)
*k = group->poly[1];
return 1;
}
开发者ID:busterb，项目名称:libssl-openbsd，代码行数:17，代码来源:ec_asn1.c
示例4: tls1_set_ec_id
/* For an EC key set TLS ID and required compression based on parameters. */
static int
tls1_set_ec_id(uint16_t *curve_id, uint8_t *comp_id, EC_KEY *ec)
{
const EC_GROUP *grp;
const EC_METHOD *meth;
int is_prime = 0;
int nid, id;
if (ec == NULL)
return (0);
/* Determine if it is a prime field. */
if ((grp = EC_KEY_get0_group(ec)) == NULL)
return (0);
if ((meth = EC_GROUP_method_of(grp)) == NULL)
return (0);
if (EC_METHOD_get_field_type(meth) == NID_X9_62_prime_field)
is_prime = 1;
/* Determine curve ID. */
nid = EC_GROUP_get_curve_name(grp);
id = tls1_ec_nid2curve_id(nid);
/* If we have an ID set it, otherwise set arbitrary explicit curve. */
if (id != 0)
*curve_id = id;
else
*curve_id = is_prime ? 0xff01 : 0xff02;
/* Specify the compression identifier. */
if (comp_id != NULL) {
if (EC_KEY_get0_public_key(ec) == NULL)
return (0);
if (EC_KEY_get_conv_form(ec) == POINT_CONVERSION_COMPRESSED) {
*comp_id = is_prime ?
TLSEXT_ECPOINTFORMAT_ansiX962_compressed_prime :
TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2;
} else {
*comp_id = TLSEXT_ECPOINTFORMAT_uncompressed;
}
}
return (1);
}
开发者ID:bbbrumley，项目名称:openbsd，代码行数:45，代码来源:t1_lib.c
示例5: EC_GROUP_get_basis_type
int EC_GROUP_get_basis_type(const EC_GROUP *group)
{
int i = 0;
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) !=
NID_X9_62_characteristic_two_field)
/* everything else is currently not supported */
return 0;
while (group->poly[i] != 0)
i++;
if (i == 4)
return NID_X9_62_ppBasis;
else if (i == 2)
return NID_X9_62_tpBasis;
else
/* everything else is currently not supported */
return 0;
}
开发者ID:swipetospin，项目名称:openssl，代码行数:20，代码来源:ec_asn1.c
示例6: Z_Gen
void Z_Gen(unsigned char *z, unsigned int klen, unsigned char *ID, unsigned char *x, unsigned char *y)
{
// Tsp 需要
// ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA)。
BN_CTX *ctx = NULL;
ctx = BN_CTX_new();
EC_KEY *ec_key = EC_KEY_new_by_curve_name(NID_sm2p256v1);
const EC_GROUP *ec_group = EC_KEY_get0_group(ec_key);
BIGNUM *p = NULL, *a = NULL, *b = NULL, *gen = NULL,
*order = NULL, *cofactor = NULL;
if ((p = BN_new()) == NULL || (a = BN_new()) == NULL ||
(b = BN_new()) == NULL || (order = BN_new()) == NULL ||
(cofactor = BN_new()) == NULL) {
goto err;
}
int is_char_two = 0;
int tmp_nid = EC_METHOD_get_field_type(EC_GROUP_method_of(ec_group));
if (tmp_nid == NID_X9_62_characteristic_two_field)
is_char_two = 1;
#ifndef OPENSSL_NO_EC2M
if (is_char_two) {
if (!EC_GROUP_get_curve_GF2m(ec_group, p, a, b, ctx)) {
goto err;
}
} else /* prime field */
#endif
{
if (!EC_GROUP_get_curve_GFp(ec_group, p, a, b, ctx)) {
goto err;
}
}
const EC_POINT *generator = EC_GROUP_get0_generator(ec_group);
unsigned char g[65];
EC_POINT_point2oct(ec_group, generator, POINT_CONVERSION_UNCOMPRESSED, g, ECDH_SIZE, NULL);
sm3_ctx_t ctx2;
sm3_init(&ctx2);
unsigned char entla[2];
entla[0] = (klen / 32);
entla[1] = (klen * 8);
sm3_update(&ctx2, entla, sizeof(entla));
sm3_update(&ctx2, ID, klen);
unsigned char buffer[32];
BN_bn2bin(a, buffer);
sm3_update(&ctx2, buffer, 32);
BN_bn2bin(b, buffer);
sm3_update(&ctx2, buffer, 32);
sm3_update(&ctx2, g + 1, 64);
sm3_update(&ctx2, x, 32);
sm3_update(&ctx2, y, 32);
sm3_final(&ctx2, z);
err:
return;
}
开发者ID:chanuei，项目名称:dmverify-analysis，代码行数:68，代码来源:Tcm_crypto.cpp
示例7: main
int main(int argc, char *argv[]) {
void *bb;
BN_CTX *ctx = NULL;
int nid;
BIO *out;
CRYPTO_malloc_debug_init();
CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
const char *text = "NIST Prime-Curve P-192";
#ifdef OPENSSL_SYS_WIN32
CRYPTO_malloc_init();
#endif
RAND_seed(rnd_seed, sizeof rnd_seed);
out = BIO_new(BIO_s_file());
if (out == NULL)
EXIT(1);
BIO_set_fp(out, stdout, BIO_NOCLOSE);
if ((ctx = BN_CTX_new()) == NULL)
goto err;
nid = NID_X9_62_prime192v1;
//EC_POINT *bb;
EC_KEY *a = NULL; //EC_KEY is a structure
BIGNUM *x_a = NULL, *y_a = NULL;
char buf[12];
//unsigned char *abuf=NULL,*bbuf=NULL;
int i, alen, blen, aout, bout;
const EC_GROUP *group;
a = EC_KEY_new_by_curve_name(nid);
if (a == NULL)
goto err;
group = EC_KEY_get0_group(a);
if ((x_a = BN_new()) == NULL)
goto err;
//BN_new returns a pointer to the bignum
if ((y_a = BN_new()) == NULL)
goto err;
BIO_puts(out, "Testing key generation with ");
BIO_puts(out, text);
if (!EC_KEY_generate_key(a))
goto err;
printf("\n1 ) generating keys\n");
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group))
== NID_X9_62_prime_field) {
if (!EC_POINT_get_affine_coordinates_GFp(group,
EC_KEY_get0_public_key(a), x_a, y_a, ctx))
goto err;
}
//returns the public key
else {
if (!EC_POINT_get_affine_coordinates_GF2m(group,
EC_KEY_get0_public_key(a), x_a, y_a, ctx))
goto err;
}
BIO_puts(out, " pri 1=");
BN_print(out, EC_KEY_get0_private_key(a));
BIO_puts(out, "\n pub 1=");
BN_print(out, x_a);
BIO_puts(out, ",");
BN_print(out, y_a);
BIO_puts(out, "\n");
func(EC_KEY_get0_public_key(a));
err: ERR_print_errors_fp(stderr);
if (x_a)
BN_free(x_a);
if (y_a)
BN_free(y_a);
if (a)
EC_KEY_free(a);
if (ctx)
BN_CTX_free(ctx);
BIO_free(out);
CRYPTO_cleanup_all_ex_data();
ERR_remove_state(0);
CRYPTO_mem_leaks_fp(stderr);
return 0;
}
开发者ID:AIdrifter，项目名称:EllipticCurveCryptography，代码行数:92，代码来源:TestOne.c
示例8: ecdsa_sign_setup
static int ecdsa_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in,
BIGNUM **kinvp, BIGNUM **rp,
const unsigned char *dgst, int dlen)
{
BN_CTX *ctx = NULL;
BIGNUM *k = NULL, *r = NULL, *order = NULL, *X = NULL;
EC_POINT *tmp_point = NULL;
const EC_GROUP *group;
int ret = 0;
if (eckey == NULL || (group = EC_KEY_get0_group(eckey)) == NULL) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
if (ctx_in == NULL) {
if ((ctx = BN_CTX_new()) == NULL) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_MALLOC_FAILURE);
return 0;
}
} else
ctx = ctx_in;
k = BN_new(); /* this value is later returned in *kinvp */
r = BN_new(); /* this value is later returned in *rp */
order = BN_new();
X = BN_new();
if (k == NULL || r == NULL || order == NULL || X == NULL) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_MALLOC_FAILURE);
goto err;
}
if ((tmp_point = EC_POINT_new(group)) == NULL) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
if (!EC_GROUP_get_order(group, order, ctx)) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
do {
/* get random k */
do
if (dgst != NULL) {
if (!BN_generate_dsa_nonce
(k, order, EC_KEY_get0_private_key(eckey), dgst, dlen,
ctx)) {
ECerr(EC_F_ECDSA_SIGN_SETUP,
EC_R_RANDOM_NUMBER_GENERATION_FAILED);
goto err;
}
} else {
if (!BN_rand_range(k, order)) {
ECerr(EC_F_ECDSA_SIGN_SETUP,
EC_R_RANDOM_NUMBER_GENERATION_FAILED);
goto err;
}
}
while (BN_is_zero(k));
/*
* We do not want timing information to leak the length of k, so we
* compute G*k using an equivalent scalar of fixed bit-length.
*/
if (!BN_add(k, k, order))
goto err;
if (BN_num_bits(k) <= BN_num_bits(order))
if (!BN_add(k, k, order))
goto err;
/* compute r the x-coordinate of generator * k */
if (!EC_POINT_mul(group, tmp_point, k, NULL, NULL, ctx)) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) ==
NID_X9_62_prime_field) {
if (!EC_POINT_get_affine_coordinates_GFp
(group, tmp_point, X, NULL, ctx)) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
}
#ifndef OPENSSL_NO_EC2M
else { /* NID_X9_62_characteristic_two_field */
if (!EC_POINT_get_affine_coordinates_GF2m(group,
tmp_point, X, NULL,
ctx)) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
}
#endif
if (!BN_nnmod(r, X, order, ctx)) {
ECerr(EC_F_ECDSA_SIGN_SETUP, ERR_R_BN_LIB);
goto err;
}
}
//.........这里部分代码省略.........
开发者ID:AndreV84，项目名称:openssl，代码行数:101，代码来源:ecdsa_ossl.c
示例9: ecdh_compute_key
/* This implementation is based on the following primitives in the IEEE 1363 standard:
* - ECKAS-DH1
* - ECSVDP-DH
* Finally an optional KDF is applied.
*/
static int ecdh_compute_key(void *out, size_t outlen, const EC_POINT *pub_key,
EC_KEY *ecdh,
void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen))
{
BN_CTX *ctx;
EC_POINT *tmp=NULL;
BIGNUM *x=NULL, *y=NULL;
const BIGNUM *priv_key;
const EC_GROUP* group;
int ret= -1;
size_t buflen, len;
unsigned char *buf=NULL;
if (outlen > INT_MAX)
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE); /* sort of, anyway */
return -1;
}
if ((ctx = BN_CTX_new()) == NULL) goto err;
BN_CTX_start(ctx);
x = BN_CTX_get(ctx);
y = BN_CTX_get(ctx);
priv_key = EC_KEY_get0_private_key(ecdh);
if (priv_key == NULL)
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_NO_PRIVATE_VALUE);
goto err;
}
group = EC_KEY_get0_group(ecdh);
if ((tmp=EC_POINT_new(group)) == NULL)
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE);
goto err;
}
if (!EC_POINT_mul(group, tmp, NULL, pub_key, priv_key, ctx))
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
goto err;
}
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
{
if (!EC_POINT_get_affine_coordinates_GFp(group, tmp, x, y, ctx))
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
goto err;
}
}
#ifndef OPENSSL_NO_EC2M
else
{
if (!EC_POINT_get_affine_coordinates_GF2m(group, tmp, x, y, ctx))
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
goto err;
}
}
#endif
buflen = (EC_GROUP_get_degree(group) + 7)/8;
len = BN_num_bytes(x);
if (len > buflen)
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_INTERNAL_ERROR);
goto err;
}
if ((buf = malloc(buflen)) == NULL)
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE);
goto err;
}
memset(buf, 0, buflen - len);
if (len != (size_t)BN_bn2bin(x, buf + buflen - len))
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_BN_LIB);
goto err;
}
if (KDF != 0)
{
if (KDF(buf, buflen, out, &outlen) == NULL)
{
ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_KDF_FAILED);
goto err;
}
ret = outlen;
}
else
{
/* no KDF, just copy as much as we can */
//.........这里部分代码省略.........
开发者ID:Basskrapfen，项目名称:openbsd，代码行数:101，代码来源:ech_ossl.c
示例10: ecdsa_sign_setup
static int ecdsa_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in, BIGNUM **kinvp,
BIGNUM **rp)
{
BN_CTX *ctx = NULL;
BIGNUM *k = NULL, *r = NULL, *order = NULL, *X = NULL;
EC_POINT *tmp_point=NULL;
const EC_GROUP *group;
int ret = 0;
if (eckey == NULL || (group = EC_KEY_get0_group(eckey)) == NULL)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
if (ctx_in == NULL)
{
if ((ctx = BN_CTX_new()) == NULL)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_MALLOC_FAILURE);
return 0;
}
}
else
ctx = ctx_in;
k = BN_new(); /* this value is later returned in *kinvp */
r = BN_new(); /* this value is later returned in *rp */
order = BN_new();
X = BN_new();
if (!k || !r || !order || !X)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_MALLOC_FAILURE);
goto err;
}
if ((tmp_point = EC_POINT_new(group)) == NULL)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
if (!EC_GROUP_get_order(group, order, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
#ifdef OPENSSL_FIPS
if (!fips_check_ec_prng(eckey))
goto err;
#endif
do
{
/* get random k */
do
if (!BN_rand_range(k, order))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,
ECDSA_R_RANDOM_NUMBER_GENERATION_FAILED);
goto err;
}
while (BN_is_zero(k));
#ifdef ECDSA_POINT_MUL_NO_CONSTTIME
/* We do not want timing information to leak the length of k,
* so we compute G*k using an equivalent scalar of fixed
* bit-length. */
if (!BN_add(k, k, order)) goto err;
if (BN_num_bits(k) <= BN_num_bits(order))
if (!BN_add(k, k, order)) goto err;
#endif /* def(ECDSA_POINT_MUL_NO_CONSTTIME) */
/* compute r the x-coordinate of generator * k */
if (!EC_POINT_mul(group, tmp_point, k, NULL, NULL, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
{
if (!EC_POINT_get_affine_coordinates_GFp(group,
tmp_point, X, NULL, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
goto err;
}
}
#ifndef OPENSSL_NO_EC2M
else /* NID_X9_62_characteristic_two_field */
{
if (!EC_POINT_get_affine_coordinates_GF2m(group,
tmp_point, X, NULL, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
goto err;
}
}
#endif
if (!BN_nnmod(r, X, order, ctx))
//.........这里部分代码省略.........
开发者ID:izick，项目名称:eme，代码行数:101，代码来源:ecs_ossl.c
示例11: eccVerifySignature
//.........这里部分代码省略.........
ctx = BN_CTX_new();
order = BN_new();
e = BN_new();
t = BN_new();
if (!ctx || !order || !e || !t) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
goto err;
}
if (!EC_GROUP_get_order(ec_group, order, ctx)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
goto err;
}
/* check r, s in [1, n-1] and r + s != 0 (mod n) */
if (BN_is_zero(r) ||
BN_is_negative(r) ||
BN_ucmp(r, order) >= 0 ||
BN_is_zero(s) ||
BN_is_negative(s) ||
BN_ucmp(s, order) >= 0) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ECDSA_R_BAD_SIGNATURE);
ret = 0;
goto err;
}
/* check t = r + s != 0 */
if (!BN_mod_add(t, r, s, order, ctx)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
goto err;
}
if (BN_is_zero(t)) {
ret = 0;
goto err;
}
/* convert digest to e */
i = BN_num_bits(order);
#if 0
if (8 * dgstlen > i) {
dgstlen = (i + 7)/8;
}
#endif
if (!BN_bin2bn(rgbHashData, 32, e)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
goto err;
}
#if 0
if ((8 * dgstlen > i) && !BN_rshift(e, e, 8 - (i & 0x7))) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
goto err;
}
#endif
/* compute (x, y) = sG + tP, P is pub_key */
if (!(point = EC_POINT_new(ec_group))) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
goto err;
}
if (!EC_POINT_mul(ec_group, point, s, pub_key, t, ctx)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
goto err;
}
if (EC_METHOD_get_field_type(EC_GROUP_method_of(ec_group)) == NID_X9_62_prime_field) {
if (!EC_POINT_get_affine_coordinates_GFp(ec_group, point, t, NULL, ctx)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
goto err;
}
} else /* NID_X9_62_characteristic_two_field */ {
if (!EC_POINT_get_affine_coordinates_GF2m(ec_group, point, t, NULL, ctx)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
goto err;
}
}
if (!BN_nnmod(t, t, order, ctx)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
goto err;
}
/* check (sG + tP).x + e == sig.r */
if (!BN_mod_add(t, t, e, order, ctx)) {
ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
goto err;
}
if (BN_ucmp(t, r) == 0) {
ret = SM2_VERIFY_SUCCESS;
} else {
ret = SM2_VERIFY_FAILED;
}
err:
if (point) EC_POINT_free(point);
if (order) BN_free(order);
if (e) BN_free(e);
if (t) BN_free(t);
if (ctx) BN_CTX_free(ctx);
return 0;
}
开发者ID:chanuei，项目名称:dmverify-analysis，代码行数:101，代码来源:Tcm_crypto.cpp
示例12: EC_KEY_set_public_key_affine_coordinates
int EC_KEY_set_public_key_affine_coordinates(EC_KEY *key, BIGNUM *x,
BIGNUM *y)
{
BN_CTX *ctx = NULL;
BIGNUM *tx, *ty;
EC_POINT *point = NULL;
int ok = 0;
#ifndef OPENSSL_NO_EC2M
int tmp_nid, is_char_two = 0;
#endif
if (key == NULL || key->group == NULL || x == NULL || y == NULL) {
ECerr(EC_F_EC_KEY_SET_PUBLIC_KEY_AFFINE_COORDINATES,
ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
ctx = BN_CTX_new();
if (ctx == NULL)
return 0;
BN_CTX_start(ctx);
point = EC_POINT_new(key->group);
if (point == NULL)
goto err;
tx = BN_CTX_get(ctx);
ty = BN_CTX_get(ctx);
if (ty == NULL)
goto err;
#ifndef OPENSSL_NO_EC2M
tmp_nid = EC_METHOD_get_field_type(EC_GROUP_method_of(key->group));
if (tmp_nid == NID_X9_62_characteristic_two_field)
is_char_two = 1;
if (is_char_two) {
if (!EC_POINT_set_affine_coordinates_GF2m(key->group, point,
x, y, ctx))
goto err;
if (!EC_POINT_get_affine_coordinates_GF2m(key->group, point,
tx, ty, ctx))
goto err;
} else
#endif
{
if (!EC_POINT_set_affine_coordinates_GFp(key->group, point,
x, y, ctx))
goto err;
if (!EC_POINT_get_affine_coordinates_GFp(key->group, point,
tx, ty, ctx))
goto err;
}
/*
* Check if retrieved coordinates match originals and are less than field
* order: if not values are out of range.
*/
if (BN_cmp(x, tx) || BN_cmp(y, ty)
|| (BN_cmp(x, key->group->field) >= 0)
|| (BN_cmp(y, key->group->field) >= 0)) {
ECerr(EC_F_EC_KEY_SET_PUBLIC_KEY_AFFINE_COORDINATES,
EC_R_COORDINATES_OUT_OF_RANGE);
goto err;
}
if (!EC_KEY_set_public_key(key, point))
goto err;
if (EC_KEY_check_key(key) == 0)
goto err;
ok = 1;
err:
BN_CTX_end(ctx);
BN_CTX_free(ctx);
EC_POINT_free(point);
return ok;
}
开发者ID:PeterMosmans，项目名称:openssl，代码行数:81，代码来源:ec_key.c
示例13: EC_GROUP_cmp
int EC_GROUP_cmp(const EC_GROUP *a, const EC_GROUP *b, BN_CTX *ctx)
{
int r = 0;
BIGNUM *a1, *a2, *a3, *b1, *b2, *b3;
BN_CTX *ctx_new = NULL;
/* compare the field types*/
if (EC_METHOD_get_field_type(EC_GROUP_method_of(a)) !=
EC_METHOD_get_field_type(EC_GROUP_method_of(b)))
return 1;
/* compare the curve name (if present) */
if (EC_GROUP_get_curve_name(a) && EC_GROUP_get_curve_name(b) &&
EC_GROUP_get_curve_name(a) == EC_GROUP_get_curve_name(b))
return 0;
if (!ctx)
ctx_new = ctx = BN_CTX_new();
if (!ctx)
return -1;
BN_CTX_start(ctx);
a1 = BN_CTX_get(ctx);
a2 = BN_CTX_get(ctx);
a3 = BN_CTX_get(ctx);
b1 = BN_CTX_get(ctx);
b2 = BN_CTX_get(ctx);
b3 = BN_CTX_get(ctx);
if (!b3)
{
BN_CTX_end(ctx);
if (ctx_new)
BN_CTX_free(ctx);
return -1;
}
/* XXX This approach assumes that the external representation
* of curves over the same field type is the same.
*/
if (!a->meth->group_get_curve(a, a1, a2, a3, ctx) ||
!b->meth->group_get_curve(b, b1, b2, b3, ctx))
r = 1;
if (r || BN_cmp(a1, b1) || BN_cmp(a2, b2) || BN_cmp(a3, b3))
r = 1;
/* XXX EC_POINT_cmp() assumes that the methods are equal */
if (r || EC_POINT_cmp(a, EC_GROUP_get0_generator(a),
EC_GROUP_get0_generator(b), ctx))
r = 1;
if (!r)
{
/* compare the order and cofactor */
if (!EC_GROUP_get_order(a, a1, ctx) ||
!EC_GROUP_get_order(b, b1, ctx) ||
!EC_GROUP_get_cofactor(a, a2, ctx) ||
!EC_GROUP_get_cofactor(b, b2, ctx))
{
BN_CTX_end(ctx);
if (ctx_new)
BN_CTX_free(ctx);
return -1;
}
if (BN_cmp(a1, b1) || BN_cmp(a2, b2))
r = 1;
}
BN_CTX_end(ctx);
if (ctx_new)
BN_CTX_free(ctx);
return r;
}
开发者ID:LucidOne，项目名称:Rovio，代码行数:73，代码来源:ec_lib.c
示例14: SM2_do_decrypt
int SM2_do_decrypt(const EVP_MD *md, const SM2CiphertextValue *cv,
unsigned char *out, size_t *outlen, EC_KEY *ec_key)
{
int ret = 0;
const EC_GROUP *group;
const BIGNUM *pri_key;
KDF_FUNC kdf;
EC_POINT *point = NULL;
EC_POINT *tmp_point = NULL;
BIGNUM *n = NULL;
BIGNUM *h = NULL;
BN_CTX *bn_ctx = NULL;
EVP_MD_CTX *md_ctx = NULL;
unsigned char buf[(OPENSSL_ECC_MAX_FIELD_BITS + 7)/4 + 1];
unsigned char mac[EVP_MAX_MD_SIZE];
unsigned int maclen = sizeof(mac);
int nbytes, len, i;
/* check arguments */
if (!md || !cv || !outlen || !ec_key) {
SM2err(SM2_F_SM2_DO_DECRYPT, ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
if (!(kdf = KDF_get_x9_63(md))) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_INVALID_DIGEST_ALGOR);
return 0;
}
if (!cv->xCoordinate || !cv->yCoordinate || !cv->hash || !cv->ciphertext) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_INVALID_CIPHERTEXT);
return 0;
}
if (cv->hash->length != EVP_MD_size(md)) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_INVALID_CIPHERTEXT);
return 0;
}
if (cv->ciphertext->length < SM2_MIN_PLAINTEXT_LENGTH
|| cv->ciphertext->length > SM2_MAX_PLAINTEXT_LENGTH) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_INVALID_CIPHERTEXT);
return 0;
}
if (!(group = EC_KEY_get0_group(ec_key))
|| !(pri_key = EC_KEY_get0_private_key(ec_key))) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_INVALID_EC_KEY);
return 0;
}
if (!out) {
*outlen = cv->ciphertext->length;
return 1;
}
if (*outlen < cv->ciphertext->length) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_BUFFER_TOO_SMALL);
return 0;
}
/* malloc */
point = EC_POINT_new(group);
tmp_point = EC_POINT_new(group);
n = BN_new();
h = BN_new();
bn_ctx = BN_CTX_new();
md_ctx = EVP_MD_CTX_new();
if (!point || !n || !h || !bn_ctx || !md_ctx) {
SM2err(SM2_F_SM2_DO_DECRYPT, ERR_R_MALLOC_FAILURE);
goto end;
}
/* init ec domain parameters */
if (!EC_GROUP_get_order(group, n, bn_ctx)) {
SM2err(SM2_F_SM2_DO_DECRYPT, ERR_R_EC_LIB);
goto end;
}
if (!EC_GROUP_get_cofactor(group, h, bn_ctx)) {
SM2err(SM2_F_SM2_DO_DECRYPT, ERR_R_EC_LIB);
goto end;
}
nbytes = (EC_GROUP_get_degree(group) + 7) / 8;
/* get x/yCoordinates as C1 = (x1, y1) */
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field) {
if (!EC_POINT_set_affine_coordinates_GFp(group, point,
cv->xCoordinate, cv->yCoordinate, bn_ctx)) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_INVALID_CIPHERTEXT);
goto end;
}
} else {
if (!EC_POINT_set_affine_coordinates_GF2m(group, point,
cv->xCoordinate, cv->yCoordinate, bn_ctx)) {
SM2err(SM2_F_SM2_DO_DECRYPT, SM2_R_INVALID_CIPHERTEXT);
goto end;
}
}
//.........这里部分代码省略.........
开发者ID:winstard，项目名称:GmSSL，代码行数:101，代码来源:sm2_enc.c
示例15: ecdsa_sign_setup
static int ecdsa_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in, BIGNUM **kinvp,
BIGNUM **rp)
{
BN_CTX *ctx = NULL;
BIGNUM *k = NULL, *r = NULL, *order = NULL, *X = NULL;
EC_POINT *tmp_point=NULL;
const EC_GROUP *group;
int ret = 0;
if (eckey == NULL || (group = EC_KEY_get0_group(eckey)) == NULL)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_PASSED_NULL_PARAMETER);
return 0;
}
if (ctx_in == NULL)
{
if ((ctx = BN_CTX_new()) == NULL)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_MALLOC_FAILURE);
return 0;
}
}
else
ctx = ctx_in;
k = BN_new(); /* this value is later returned in *kinvp */
r = BN_new(); /* this value is later returned in *rp */
order = BN_new();
X = BN_new();
if (!k || !r || !order || !X)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_MALLOC_FAILURE);
goto err;
}
if ((tmp_point = EC_POINT_new(group)) == NULL)
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
if (!EC_GROUP_get_order(group, order, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
do
{
/* get random k */
do
if (!BN_rand_range(k, order))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,
ECDSA_R_RANDOM_NUMBER_GENERATION_FAILED);
goto err;
}
while (BN_is_zero(k));
/* compute r the x-coordinate of generator * k */
if (!EC_POINT_mul(group, tmp_point, k, NULL, NULL, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
goto err;
}
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
{
if (!EC_POINT_get_affine_coordinates_GFp(group,
tmp_point, X, NULL, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
goto err;
}
}
else /* NID_X9_62_characteristic_two_field */
{
if (!EC_POINT_get_affine_coordinates_GF2m(group,
tmp_point, X, NULL, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
goto err;
}
}
if (!BN_nnmod(r, X, order, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_BN_LIB);
goto err;
}
}
while (BN_is_zero(r));
/* compute the inverse of k */
if (!BN_mod_inverse(k, k, order, ctx))
{
ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_BN_LIB);
goto err;
}
/* clear old values if necessary */
if (*rp != NULL)
BN_clear_free(*rp);
if (*kinvp != NULL)
//.........这里部分代码省略.........
开发者ID:12019，项目名称:vendor_st-ericsson_u8500，代码行数:101，代码来源:ecs_ossl.c
示例16: ecparam_main
//.........这里部分代码省略.........
if (text) {
if (!ECPKParameters_print(out, group, 0))
goto end;
}
if (check) {
if (group == NULL)
BIO_printf(bio_err, "no elliptic curve parameters\n");
BIO_printf(bio_err, "checking elliptic curve parameters: ");
if (!EC_GROUP_check(group, NULL)) {
BIO_printf(bio_err, "failed\n");
ERR_print_errors(bio_err);
} else
BIO_printf(bio_err, "ok\n");
}
if (C) {
size_t buf_len = 0, tmp_len = 0;
const EC_POINT *point;
int is_prime, len = 0;
const EC_METHOD *meth = EC_GROUP_method_of(group);
if ((ec_p = BN_new()) == NULL
|| (ec_a = BN_new()) == NULL
|| (ec_b = BN_new()) == NULL
|| (ec_gen = BN_new()) == NULL
|| (ec_order = BN_new()) == NULL
|| (ec_cofactor = BN_new()) == NULL) {
perror("Can't allocate BN");
goto end;
}
is_prime = (EC_METHOD_get_field_type(meth) == NID_X9_62_prime_field);
if (!is_prime) {
BIO_printf(bio_err, "Can only handle X9.62 prime fields\n");
goto end;
}
if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a, ec_b, NULL))
goto end;
if ((point = EC_GROUP_get0_generator(group)) == NULL)
goto end;
if (!EC_POINT_point2bn(group, point,
EC_GROUP_get_point_conversion_form(group),
ec_gen, NULL))
goto end;
if (!EC_GROUP_get_order(group, ec_order, NULL))
goto end;
if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
goto end;
if (!ec_p || !ec_a || !ec_b || !ec_gen || !ec_order || !ec_cofactor)
goto end;
len = BN_num_bits(ec_order);
if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
buf_len = tmp_len;
if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
buf_len = tmp_len;
if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
buf_len = tmp_len;
if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
buf_len = tmp_len;
开发者ID:375670450，项目名称:openssl，代码行数:67，代码来源:ecparam.c
示例17: ecdh_cavs_kat
/*
* NIST SP800-56A co-factor ECDH tests.
* KATs taken from NIST documents with parameters:
*
* - (QCAVSx,QCAVSy) is the public key for CAVS.
* - dIUT is the private key for IUT.
* - (QIUTx,QIUTy) is the public key for IUT.
* - ZIUT is the shared secret KAT.
*
* CAVS: Cryptographic Algorithm Validation System
* IUT: Implementation Under Test
*
* This function tests two things:
*
* 1. dIUT * G = (QIUTx,QIUTy)
* i.e. public key for IUT computes correctly.
* 2. x-coord of cofactor * dIUT * (QCAVSx,QCAVSy) = ZIUT
* i.e. co-factor ECDH key computes correctly.
*
* returns zero on failure or unsupported curve. One otherwise.
*/
static int ecdh_cavs_kat(BIO *out, const ecdh_cavs_kat_t *kat)
{
int rv = 0, is_char_two = 0;
EC_KEY *key1 = NULL;
EC_POINT *pub = NULL;
const EC_GROUP *group = NULL;
BIGNUM *bnz = NULL, *x = NULL, *y = NULL;
unsigned char *Ztmp = NULL, *Z = NULL;
size_t Ztmplen, Zlen;
BIO_puts(out, "Testing ECC CDH Primitive SP800-56A with ");
BIO_puts(out, OBJ_nid2sn(kat->nid));
/* dIUT is IUT's private key */
if ((key1 = mk_eckey(kat->nid, kat->dIUT)) == NULL)
goto err;
/* these are cofactor ECDH KATs */
EC_KEY_set_flags(key1, EC_FLAG_COFACTOR_ECDH);
if ((group = EC_KEY_get0_group(key1)) == NULL)
goto err;
if ((pub = EC_POINT_new(group)) == NULL)
goto err;
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_characteristic_two_field)
is_char_two = 1;
/* (QIUTx, QIUTy) is IUT's public key */
if(!BN_hex2bn(&x, kat->QIUTx))
goto err;
if(!BN_hex2bn(&y, kat->QIUTy))
goto err;
if (is_char_two) {
#ifdef OPENSSL_NO_EC2M
goto err;
#else
if (!EC_POINT_set_affine_coordinates_GF2m(group, pub, x, y, NULL))
goto err;
#endif
}
else {
if (!EC_POINT_set_affine_coordinates_GFp(group, pub, x, y, NULL))
goto err;
}
/* dIUT * G = (QIUTx, QIUTy) should hold */
if (EC_POINT_cmp(group, EC_KEY_get0_public_key(key1), pub, NULL))
goto err;
/* (QCAVSx, QCAVSy) is CAVS's public key */
if(!BN_hex2bn(&x, kat->QCAVSx))
goto err;
if(!BN_hex2bn(&y, kat->QCAVSy))
goto err;
if (is_char_two) {
#ifdef OPENSSL_NO_EC2M
goto err;
#else
if (!EC_POINT_set_affine_coordinates_GF2m(group, pub, x, y, NULL))
goto err;
#endif
}
else {
if (!EC_POINT_set_affine_coordinates_GFp(group, pub, x, y, NULL))
goto err;
}
/* ZIUT is the shared secret */
if(!BN_hex2bn(&bnz, kat->ZIUT))
goto err;
Ztmplen = (EC_GROUP_get_degree(EC_KEY_get0_group(key1)) + 7) / 8;
Zlen = BN_num_bytes(bnz);
if (Zlen > Ztmplen)
goto err;
if((Ztmp = OPENSSL_zalloc(Ztmplen)) == NULL)
goto err;
if((Z = OPENSSL_zalloc(Ztmplen)) == NULL)
goto err;
if(!BN_bn2binpad(bnz, Z, Ztmplen))
goto err;
if (!ECDH_compute_key(Ztmp, Ztmplen, pub, key1, 0))
//.........这里部分代码省略.........
开发者ID:277800076，项目名称:openssl，代码行数:101，代码来源:ecdhtest.c
示例18: main
return NULL;
#endif
}
int main(void) {
unsigned char *abuf = NULL;
//const EC_POINT *public_key;
int i, alen, aout, jj = 0;
int sockfd, new_fd; // listen on sock_fd, new connection on new_fd
struct sockaddr_in my_addr; // my address information
struct sockaddr_in their_addr; // connector's address information
socklen_t sin_size;
int yes = 1, numbytes;
char buf[MAXDATASIZE];
/*//////////////////////////////////////////////////////////////Generating Keys/////////////////////////////////////*/
BN_CTX *ctx = NULL;
int nid;
BIO *out;
CRYPTO_malloc_debug_init();
CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
const char *text = "NIST Prime-Curve P-192";
#ifdef OPENSSL_SYS_WIN32
CRYPTO_malloc_init();
#endif
RAND_seed(rnd_seed, sizeof rnd_seed);
out = BIO_new(BIO_s_file());
if (out == NULL)
EXIT(1);
BIO_set_fp(out, stdout, BIO_NOCLOSE);
if ((ctx = BN_CTX_new()) == NULL)
goto err;
nid = NID_X9_62_prime192v1;
EC_KEY *a = NULL; //EC_KEY is a structure
BIGNUM *x_a = NULL, *y_a = NULL;
const BIGNUM *BIG = NULL;
char *buff;
//unsigned char *abuf=NULL,*bbuf=NULL;
const EC_GROUP *group;
a = EC_KEY_new_by_curve_name(nid);
if (a == NULL)
goto err;
group = EC_KEY_get0_group(a);
// aa=EC_POINT_new(group);
if ((x_a = BN_new()) == NULL)
goto err;
//BN_new returns a pointer to the bignum
if ((y_a = BN_new()) == NULL)
goto err;
// if ((BIG=BN_new()) == NULL) goto err;
BIO_puts(out, "Testing key generation with ");
BIO_puts(out, text);
if (!EC_KEY_generate_key(a))
goto err;
printf("\n1 ) generating keys\n");
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group))
== NID_X9_62_prime_field) {
if (!EC_POINT_get_affine_coordinates_GFp(group,
EC_KEY_get0_public_key(a), x_a, y_a, ctx))
goto err;
}
//returns the public key
else {
if (!EC_POINT_get_affine_coordinates_GF2m(group,
EC_KEY_get0_public_key(a), x_a, y_a, ctx))
goto err;
}
BIO_puts(out, " pri 1=");
BN_print(out, EC_KEY_get0_private_key(a));
BIO_puts(out, "\n pub 1=");
BN_print(out, x_a);
BIO_puts(out, ",");
BN_print(out, y_a);
BIO_puts(out, "\n");
/*
printf("importnt work\n");
//BN_print(out,x_a);
buff=BN_bn2dec(x_a);
printf("%s\n",buff);
BN_dec2bn(&(x_a),buff);
printf("%s\n",buff);
BN_print(out,x_a);
*/
/*//////////////////////////////////////////////////////////////////////////////////////////////////////////////////*/
//.........这里部分代码省略.........
开发者ID:AIdrifter，项目名称:EllipticCurveCryptography，代码行数:101，代码来源:Server.c
示例19: test_ecdh_curve
static int test_ecdh_curve(int nid, const char *text, BN_CTX *ctx, BIO *out) {
printf("in ecdh test\n");
EC_KEY *a = NULL; //EC_KEY is a structure
EC_KEY *b = NULL;
BIGNUM *x_a = NULL, *y_a = NULL, *x_b = NULL, *y_b = NULL;
char buf[12];
unsigned char *abuf = NULL, *bbuf = NULL;
int i, alen, blen, aout, bout, ret = 0;
const EC_GROUP *group;
a = EC_KEY_new_by_curve_name(nid);
// creates a new key according to the curve specified
//it fills in the EC_KEY structure // use function called EC_KEY *EC_KEY_new(void)
//also use a function called EC_GROUP_new_by_curve_name() creates a EC_GROUP structure specified by a curve name (in form of a NID) */
// the group returned is set in the EC_KEY structure.
b = EC_KEY_new_by_curve_name(nid);
if (a == NULL || b == NULL)
goto err;
group = EC_KEY_get0_group(a); //returns the EC_GROUP structure created by the EC_KEY structure
//EC_GROUP structure is present in the EC_KEY structure.
if ((x_a = BN_new()) == NULL)
goto err;
//BN_new returns a pointer to the bignum
if ((y_a = BN_new()) == NULL)
goto err;
if ((x_b = BN_new()) == NULL)
goto err;
if ((y_b = BN_new()) == NULL)
goto err;
BIO_puts(out, "Testing key generation with ");
BIO_puts(out, text);
#ifdef NOISY
printf ("noisy");
BIO_puts(out,"\n");
BIO_puts(out,"\n");
BIO_puts(out,"\n");
#else
BIO_flush(out);
#endif
//public key number one is created here
if (!EC_KEY_generate_key(a))
goto err;
//pass the filled EC_KEY structure and it will create a public or private ec key.
//it places the key in a->priv_key a->pub_key /// PUBLIC AND PVT KEYS ARE GENERATED BY THE SCALAR MULTIPLICATION
printf("\n1 ) generating keys\n");
if (EC_METHOD_get_field_type(EC_GROUP_method_of(group))
== NID_X9_62_prime_field) {
if (!EC_POINT_get_affine_coordinates_GFp(group,
EC_KEY_get0_public_key(a), x_a, y_a, ctx))
goto err;
}
//returns the public key
else {
if (!EC_POINT_get_affine_coordinates_GF2m(group,
EC_KEY_get0_public_key(a), x_a, y_a, ctx))
goto err;
}
//BN_print_fp(stdout, a->pub_key);
printf("private key is : ");
BN_print_fp(stdout, EC_KEY_get0_private_key(a));
printf("\nAffine cordinates x:");
BN_print_fp(stdout, x_a);
printf("\nAffine cordinates y:");
BN_print_fp(stdout, y_a);
printf(
"\n2 ) generated keys , generated affine points x and y , and also determided the primse brinary case\n");
#ifdef NOISY
printf("no generation");
BIO_puts(out," pri 1=");
BN_print(out,a->priv_key);
BIO_puts(out,"\n pub 1=");
BN_print(out,x_a);
BIO_puts(out,",");
BN_print(out,y_a);
BIO_puts(out,"\n");
#else
BIO_printf(out, " .");
BIO_flush(out);
#endif
//public key number two is created here
if (!EC_KEY_generate_key(b))
goto err;
if (EC_METHOD_ge
|
客服电话
APP下载
官方微信
请发表评论