C++ EC_GROUP_get_curve_GFp函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中EC_GROUP_get_curve_GFp函数的典型用法代码示例。如果您正苦于以下问题：C++ EC_GROUP_get_curve_GFp函数的具体用法？C++ EC_GROUP_get_curve_GFp怎么用？C++ EC_GROUP_get_curve_GFp使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了EC_GROUP_get_curve_GFp函数的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: openssl_ec_group_parse

static int openssl_ec_group_parse(lua_State*L)
{
  const EC_GROUP* group = CHECK_OBJECT(1, EC_GROUP, "openssl.ec_group");
  const EC_POINT *generator = EC_GROUP_get0_generator(group);
  BN_CTX* ctx = BN_CTX_new();
  BIGNUM *a, *b, *p, *order, *cofactor;

  lua_newtable(L);
  if (generator)
  {
    generator = EC_POINT_dup(generator, group);
    AUXILIAR_SETOBJECT(L, generator, "openssl.ec_point", -1, "generator");
  }

  order = BN_new();
  EC_GROUP_get_order(group, order, ctx);
  AUXILIAR_SETOBJECT(L, order, "openssl.bn", -1, "order");

  cofactor = BN_new();
  EC_GROUP_get_cofactor(group, cofactor, ctx);
  AUXILIAR_SETOBJECT(L, cofactor, "openssl.bn", -1, "cofactor");

  AUXILIAR_SET(L, -1, "asn1_flag", EC_GROUP_get_asn1_flag(group), integer);
  AUXILIAR_SET(L, -1, "degree", EC_GROUP_get_degree(group), integer);
  AUXILIAR_SET(L, -1, "curve_name", EC_GROUP_get_curve_name(group), integer);
  AUXILIAR_SET(L, -1, "conversion_form", EC_GROUP_get_point_conversion_form(group), integer);

  AUXILIAR_SETLSTR(L, -1, "seed", EC_GROUP_get0_seed(group), EC_GROUP_get_seed_len(group));

  a = BN_new();
  b = BN_new();
  p = BN_new();
  EC_GROUP_get_curve_GFp(group, p, a, b, ctx);
  lua_newtable(L);
  {
    AUXILIAR_SETOBJECT(L, p, "openssl.bn", -1, "p");
    AUXILIAR_SETOBJECT(L, a, "openssl.bn", -1, "a");
    AUXILIAR_SETOBJECT(L, b, "openssl.bn", -1, "b");
  }
  lua_setfield(L, -2, "curve");
  BN_CTX_free(ctx);

  return 1;
}

开发者ID:witchu，项目名称:lua-openssl，代码行数:44，代码来源:ec.c

示例2: ECDSA_SIG_recover_key_GFp

// Perform ECDSA key recovery (see SEC1 4.1.6) for curves over (mod p)-fields
// recid selects which key is recovered
// if check is nonzero, additional checks are performed
int ECDSA_SIG_recover_key_GFp(EC_KEY *eckey, ECDSA_SIG *ecsig, const unsigned char *msg, int msglen, int recid, int check)
{
    if (!eckey) return 0;

    int ret = 0;
    BN_CTX *ctx = NULL;

    BIGNUM *x = NULL;
    BIGNUM *e = NULL;
    BIGNUM *order = NULL;
    BIGNUM *sor = NULL;
    BIGNUM *eor = NULL;
    BIGNUM *field = NULL;
    EC_POINT *R = NULL;
    EC_POINT *O = NULL;
    EC_POINT *Q = NULL;
    BIGNUM *rr = NULL;
    BIGNUM *zero = NULL;
    int n = 0;
    int i = recid / 2;

    const EC_GROUP *group = EC_KEY_get0_group(eckey);
    if ((ctx = BN_CTX_new()) == NULL) { ret = -1; goto err; }
    BN_CTX_start(ctx);
    order = BN_CTX_get(ctx);
    if (!EC_GROUP_get_order(group, order, ctx)) { ret = -2; goto err; }
    x = BN_CTX_get(ctx);
    if (!BN_copy(x, order)) { ret=-1; goto err; }
    if (!BN_mul_word(x, i)) { ret=-1; goto err; }
    if (!BN_add(x, x, ecsig->r)) { ret=-1; goto err; }
    field = BN_CTX_get(ctx);
    if (!EC_GROUP_get_curve_GFp(group, field, NULL, NULL, ctx)) { ret=-2; goto err; }
    if (BN_cmp(x, field) >= 0) { ret=0; goto err; }
    if ((R = EC_POINT_new(group)) == NULL) { ret = -2; goto err; }
    if (!EC_POINT_set_compressed_coordinates_GFp(group, R, x, recid % 2, ctx)) { ret=0; goto err; }
    if (check)
    {
        if ((O = EC_POINT_new(group)) == NULL) { ret = -2; goto err; }
        if (!EC_POINT_mul(group, O, NULL, R, order, ctx)) { ret=-2; goto err; }
        if (!EC_POINT_is_at_infinity(group, O)) { ret = 0; goto err; }
    }
    if ((Q = EC_POINT_new(group)) == NULL) { ret = -2; goto err; }
    n = EC_GROUP_get_degree(group);
    e = BN_CTX_get(ctx);
    if (!BN_bin2bn(msg, msglen, e)) { ret=-1; goto err; }
    if (8*msglen > n) BN_rshift(e, e, 8-(n & 7));
    zero = BN_CTX_get(ctx);
    if (!BN_zero(zero)) { ret=-1; goto err; }
    if (!BN_mod_sub(e, zero, e, order, ctx)) { ret=-1; goto err; }
    rr = BN_CTX_get(ctx);
    if (!BN_mod_inverse(rr, ecsig->r, order, ctx)) { ret=-1; goto err; }
    sor = BN_CTX_get(ctx);
    if (!BN_mod_mul(sor, ecsig->s, rr, order, ctx)) { ret=-1; goto err; }
    eor = BN_CTX_get(ctx);
    if (!BN_mod_mul(eor, e, rr, order, ctx)) { ret=-1; goto err; }
    if (!EC_POINT_mul(group, Q, eor, R, sor, ctx)) { ret=-2; goto err; }
    if (!EC_KEY_set_public_key(eckey, Q)) { ret=-2; goto err; }

    ret = 1;

err:
    if (ctx) {
        BN_CTX_end(ctx);
        BN_CTX_free(ctx);
    }
    if (R != NULL) EC_POINT_free(R);
    if (O != NULL) EC_POINT_free(O);
    if (Q != NULL) EC_POINT_free(Q);
    return ret;
}

开发者ID:uscoin，项目名称:uscoin，代码行数:73，代码来源:key.cpp

示例3: compute_password_element

int
compute_password_element (pwd_session_t *sess, uint16_t grp_num,
			  char *password, int password_len,
			  char *id_server, int id_server_len,
			  char *id_peer, int id_peer_len,
			  uint32_t *token)
{
    BIGNUM *x_candidate = NULL, *rnd = NULL, *cofactor = NULL;
    HMAC_CTX ctx;
    uint8_t pwe_digest[SHA256_DIGEST_LENGTH], *prfbuf = NULL, ctr;
    int nid, is_odd, primebitlen, primebytelen, ret = 0;

    switch (grp_num) { /* from IANA registry for IKE D-H groups */
	case 19:
	    nid = NID_X9_62_prime256v1;
	    break;
	case 20:
	    nid = NID_secp384r1;
	    break;
	case 21:
	    nid = NID_secp521r1;
	    break;
	case 25:
	    nid = NID_X9_62_prime192v1;
	    break;
	case 26:
	    nid = NID_secp224r1;
	    break;
	default:
	    DEBUG("unknown group %d", grp_num);
	    goto fail;
    }

    sess->pwe = NULL;
    sess->order = NULL;
    sess->prime = NULL;

    if ((sess->group = EC_GROUP_new_by_curve_name(nid)) == NULL) {
	DEBUG("unable to create EC_GROUP");
	goto fail;
    }

    if (((rnd = BN_new()) == NULL) ||
	((cofactor = BN_new()) == NULL) ||
	((sess->pwe = EC_POINT_new(sess->group)) == NULL) ||
	((sess->order = BN_new()) == NULL) ||
	((sess->prime = BN_new()) == NULL) ||
	((x_candidate = BN_new()) == NULL)) {
	DEBUG("unable to create bignums");
	goto fail;
    }

    if (!EC_GROUP_get_curve_GFp(sess->group, sess->prime, NULL, NULL, NULL))
    {
	DEBUG("unable to get prime for GFp curve");
	goto fail;
    }
    if (!EC_GROUP_get_order(sess->group, sess->order, NULL)) {
	DEBUG("unable to get order for curve");
	goto fail;
    }
    if (!EC_GROUP_get_cofactor(sess->group, cofactor, NULL)) {
	DEBUG("unable to get cofactor for curve");
	goto fail;
    }
    primebitlen = BN_num_bits(sess->prime);
    primebytelen = BN_num_bytes(sess->prime);
    if ((prfbuf = talloc_zero_array(sess, uint8_t, primebytelen)) == NULL) {
	DEBUG("unable to alloc space for prf buffer");
	goto fail;
    }
    ctr = 0;
    while (1) {
	if (ctr > 10) {
	    DEBUG("unable to find random point on curve for group %d, something's fishy", grp_num);
	    goto fail;
	}
	ctr++;

	/*
	 * compute counter-mode password value and stretch to prime
	 *    pwd-seed = H(token | peer-id | server-id | password |
	 *		   counter)
	 */
	H_Init(&ctx);
	H_Update(&ctx, (uint8_t *)token, sizeof(*token));
	H_Update(&ctx, (uint8_t *)id_peer, id_peer_len);
	H_Update(&ctx, (uint8_t *)id_server, id_server_len);
	H_Update(&ctx, (uint8_t *)password, password_len);
	H_Update(&ctx, (uint8_t *)&ctr, sizeof(ctr));
	H_Final(&ctx, pwe_digest);

	BN_bin2bn(pwe_digest, SHA256_DIGEST_LENGTH, rnd);
	eap_pwd_kdf(pwe_digest, SHA256_DIGEST_LENGTH,
		    "EAP-pwd Hunting And Pecking",
		    strlen("EAP-pwd Hunting And Pecking"),
		    prfbuf, primebitlen);

	BN_bin2bn(prfbuf, primebytelen, x_candidate);
	/*
//.........这里部分代码省略.........

开发者ID:p11235，项目名称:freeradius-server，代码行数:101，代码来源:eap_pwd.c

示例4: ecparam_main


//.........这里部分代码省略.........
	}
	if (text) {
		if (!ECPKParameters_print(out, group, 0))
			goto end;
	}
	if (check) {
		if (group == NULL)
			BIO_printf(bio_err, "no elliptic curve parameters\n");
		BIO_printf(bio_err, "checking elliptic curve parameters: ");
		if (!EC_GROUP_check(group, NULL)) {
			BIO_printf(bio_err, "failed\n");
			ERR_print_errors(bio_err);
		} else
			BIO_printf(bio_err, "ok\n");

	}
	if (C) {
		size_t buf_len = 0, tmp_len = 0;
		const EC_POINT *point;
		int is_prime, len = 0;
		const EC_METHOD *meth = EC_GROUP_method_of(group);

		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
		    (ec_order = BN_new()) == NULL ||
		    (ec_cofactor = BN_new()) == NULL) {
			perror("malloc");
			goto end;
		}
		is_prime = (EC_METHOD_get_field_type(meth) ==
		    NID_X9_62_prime_field);

		if (is_prime) {
			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
				ec_b, NULL))
				goto end;
		} else {
			/* TODO */
			goto end;
		}

		if ((point = EC_GROUP_get0_generator(group)) == NULL)
			goto end;
		if (!EC_POINT_point2bn(group, point,
			EC_GROUP_get_point_conversion_form(group), ec_gen,
			NULL))
			goto end;
		if (!EC_GROUP_get_order(group, ec_order, NULL))
			goto end;
		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
			goto end;

		if (!ec_p || !ec_a || !ec_b || !ec_gen ||
		    !ec_order || !ec_cofactor)
			goto end;

		len = BN_num_bits(ec_order);

		if ((tmp_len = (size_t) BN_num_bytes(ec_p)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t) BN_num_bytes(ec_a)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t) BN_num_bytes(ec_b)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t) BN_num_bytes(ec_gen)) > buf_len)
			buf_len = tmp_len;

开发者ID:benwh4，项目名称:libressl，代码行数:67，代码来源:ecparam.c

示例5: ECPKParameters_print

int 
ECPKParameters_print(BIO * bp, const EC_GROUP * x, int off)
{
	unsigned char *buffer = NULL;
	size_t buf_len = 0, i;
	int ret = 0, reason = ERR_R_BIO_LIB;
	BN_CTX *ctx = NULL;
	const EC_POINT *point = NULL;
	BIGNUM *p = NULL, *a = NULL, *b = NULL, *gen = NULL, *order = NULL,
	*cofactor = NULL;
	const unsigned char *seed;
	size_t seed_len = 0;
	const char *nname;

	static const char *gen_compressed = "Generator (compressed):";
	static const char *gen_uncompressed = "Generator (uncompressed):";
	static const char *gen_hybrid = "Generator (hybrid):";

	if (!x) {
		reason = ERR_R_PASSED_NULL_PARAMETER;
		goto err;
	}
	ctx = BN_CTX_new();
	if (ctx == NULL) {
		reason = ERR_R_MALLOC_FAILURE;
		goto err;
	}
	if (EC_GROUP_get_asn1_flag(x)) {
		/* the curve parameter are given by an asn1 OID */
		int nid;

		if (!BIO_indent(bp, off, 128))
			goto err;

		nid = EC_GROUP_get_curve_name(x);
		if (nid == 0)
			goto err;

		if (BIO_printf(bp, "ASN1 OID: %s", OBJ_nid2sn(nid)) <= 0)
			goto err;
		if (BIO_printf(bp, "\n") <= 0)
			goto err;

		nname = EC_curve_nid2nist(nid);
		if (nname) {
			if (!BIO_indent(bp, off, 128))
				goto err;
			if (BIO_printf(bp, "NIST CURVE: %s\n", nname) <= 0)
				goto err;
		}
	} else {
		/* explicit parameters */
		int is_char_two = 0;
		point_conversion_form_t form;
		int tmp_nid = EC_METHOD_get_field_type(EC_GROUP_method_of(x));

		if (tmp_nid == NID_X9_62_characteristic_two_field)
			is_char_two = 1;

		if ((p = BN_new()) == NULL || (a = BN_new()) == NULL ||
		    (b = BN_new()) == NULL || (order = BN_new()) == NULL ||
		    (cofactor = BN_new()) == NULL) {
			reason = ERR_R_MALLOC_FAILURE;
			goto err;
		}
#ifndef OPENSSL_NO_EC2M
		if (is_char_two) {
			if (!EC_GROUP_get_curve_GF2m(x, p, a, b, ctx)) {
				reason = ERR_R_EC_LIB;
				goto err;
			}
		} else		/* prime field */
#endif
		{
			if (!EC_GROUP_get_curve_GFp(x, p, a, b, ctx)) {
				reason = ERR_R_EC_LIB;
				goto err;
			}
		}

		if ((point = EC_GROUP_get0_generator(x)) == NULL) {
			reason = ERR_R_EC_LIB;
			goto err;
		}
		if (!EC_GROUP_get_order(x, order, NULL) ||
		    !EC_GROUP_get_cofactor(x, cofactor, NULL)) {
			reason = ERR_R_EC_LIB;
			goto err;
		}
		form = EC_GROUP_get_point_conversion_form(x);

		if ((gen = EC_POINT_point2bn(x, point,
			    form, NULL, ctx)) == NULL) {
			reason = ERR_R_EC_LIB;
			goto err;
		}
		buf_len = (size_t) BN_num_bytes(p);
		if (buf_len < (i = (size_t) BN_num_bytes(a)))
			buf_len = i;
		if (buf_len < (i = (size_t) BN_num_bytes(b)))
//.........这里部分代码省略.........

开发者ID:2trill2spill，项目名称:nextgen，代码行数:101，代码来源:eck_prn.c

示例6: BFIBE_setup

int BFIBE_setup(const EC_GROUP *group, const EVP_MD *md,
	BFPublicParameters **pmpk, BFMasterSecret **pmsk)
{
	int ret = 0;
	BFPublicParameters *mpk = NULL;
	BFMasterSecret *msk = NULL;
	BN_CTX *bn_ctx = NULL;
	EC_POINT *point = NULL;
	BIGNUM *a;
	BIGNUM *b;

	if (!group || !pmpk || !pmsk) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, ERR_R_PASSED_NULL_PARAMETER);
		return 0;
	}

	if (!(bn_ctx = BN_CTX_new())) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, ERR_R_MALLOC_FAILURE);
		goto end;
	}

	BN_CTX_start(bn_ctx);
	a = BN_CTX_get(bn_ctx);
	b = BN_CTX_get(bn_ctx);
	if (!b) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, ERR_R_MALLOC_FAILURE);
		goto end;
	}

	mpk = BFPublicParameters_new();
	msk = BFMasterSecret_new();
	point = EC_POINT_new(group);

	if (!mpk || !msk || !point) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, ERR_R_MALLOC_FAILURE);
		goto end;
	}

	/*
	 * set mpk->version
	 * set mpk->curve
	 */

	mpk->version = BFIBE_VERSION;

	OPENSSL_assert(mpk->curve);
	ASN1_OBJECT_free(mpk->curve);
	if (!(mpk->curve = OBJ_nid2obj(NID_type1curve))) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, BFIBE_R_NOT_NAMED_CURVE);
		goto end;
	}

	/* mpk->p = group->p */
	if (!EC_GROUP_get_curve_GFp(group, mpk->p, a, b, bn_ctx)) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, ERR_R_EC_LIB);
		goto end;
	}
	if (!BN_is_zero(a) || !BN_is_one(b)) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, BFIBE_R_INVALID_TYPE1CURVE);
		goto end;
	}

	/* mpk->q = group->order */
	if (!EC_GROUP_get_order(group, mpk->q, bn_ctx)) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, BFIBE_R_INVALID_TYPE1CURVE);
		goto end;
	}

	/* mpk->pointP = group->generator */
	if (!EC_POINT_get_affine_coordinates_GFp(group, EC_GROUP_get0_generator(group),
		mpk->pointP->x, mpk->pointP->y, bn_ctx)) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, ERR_R_EC_LIB);
		goto end;
	}

	/* set mpk->hashfcn from F_p^2 element bits */
	OPENSSL_assert(mpk->hashfcn);
	ASN1_OBJECT_free(mpk->hashfcn);
	if (!(mpk->hashfcn = OBJ_nid2obj(EVP_MD_type(md)))) {
		BFIBEerr(BFIBE_F_BFIBE_SETUP, BFIBE_R_PARSE_PAIRING);
		goto end;
	}

	/*
	 * set msk->version
	 * random msk->masterSecret in [2, q - 1]
	 */

	msk->version = BFIBE_VERSION;

	do {
		if (!BN_rand_range(msk->masterSecret, mpk->q)) {
			BFIBEerr(BFIBE_F_BFIBE_SETUP, ERR_R_BN_LIB);
			goto end;
		}
	} while (BN_is_zero(msk->masterSecret) || BN_is_one(msk->masterSecret));

	/* mpk->pointPpub = msk->masterSecret * mpk->pointP */

	if (!EC_POINT_mul(group, point, msk->masterSecret, NULL, NULL, bn_ctx)) {
//.........这里部分代码省略.........

开发者ID:winstard，项目名称:GmSSL，代码行数:101，代码来源:bfibe_lib.c

示例7: compute_password_element

/*
 * compute a "random" secret point on an elliptic curve based
 * on the password and identities.
 */
int compute_password_element(EAP_PWD_group *grp, u16 num,
			     u8 *password, int password_len,
			     u8 *id_server, int id_server_len,
			     u8 *id_peer, int id_peer_len, u8 *token)
{
	BIGNUM *x_candidate = NULL, *rnd = NULL, *cofactor = NULL;
	struct crypto_hash *hash;
	unsigned char pwe_digest[SHA256_MAC_LEN], *prfbuf = NULL, ctr;
	int nid, is_odd, ret = 0;
	size_t primebytelen, primebitlen;

	switch (num) { /* from IANA registry for IKE D-H groups */
        case 19:
		nid = NID_X9_62_prime256v1;
		break;
        case 20:
		nid = NID_secp384r1;
		break;
        case 21:
		nid = NID_secp521r1;
		break;
        case 25:
		nid = NID_X9_62_prime192v1;
		break;
        case 26:
		nid = NID_secp224r1;
		break;
        default:
		wpa_printf(MSG_INFO, "EAP-pwd: unsupported group %d", num);
		return -1;
	}

	grp->pwe = NULL;
	grp->order = NULL;
	grp->prime = NULL;

	if ((grp->group = EC_GROUP_new_by_curve_name(nid)) == NULL) {
		wpa_printf(MSG_INFO, "EAP-pwd: unable to create EC_GROUP");
		goto fail;
	}

	if (((rnd = BN_new()) == NULL) ||
	    ((cofactor = BN_new()) == NULL) ||
	    ((grp->pwe = EC_POINT_new(grp->group)) == NULL) ||
	    ((grp->order = BN_new()) == NULL) ||
	    ((grp->prime = BN_new()) == NULL) ||
	    ((x_candidate = BN_new()) == NULL)) {
		wpa_printf(MSG_INFO, "EAP-pwd: unable to create bignums");
		goto fail;
	}

	if (!EC_GROUP_get_curve_GFp(grp->group, grp->prime, NULL, NULL, NULL))
	{
		wpa_printf(MSG_INFO, "EAP-pwd: unable to get prime for GFp "
			   "curve");
		goto fail;
	}
	if (!EC_GROUP_get_order(grp->group, grp->order, NULL)) {
		wpa_printf(MSG_INFO, "EAP-pwd: unable to get order for curve");
		goto fail;
	}
	if (!EC_GROUP_get_cofactor(grp->group, cofactor, NULL)) {
		wpa_printf(MSG_INFO, "EAP-pwd: unable to get cofactor for "
			   "curve");
		goto fail;
	}
	primebitlen = BN_num_bits(grp->prime);
	primebytelen = BN_num_bytes(grp->prime);
	if ((prfbuf = os_malloc(primebytelen)) == NULL) {
		wpa_printf(MSG_INFO, "EAP-pwd: unable to malloc space for prf "
			   "buffer");
		goto fail;
	}
	os_memset(prfbuf, 0, primebytelen);
	ctr = 0;
	while (1) {
		if (ctr > 30) {
			wpa_printf(MSG_INFO, "EAP-pwd: unable to find random "
				   "point on curve for group %d, something's "
				   "fishy", num);
			goto fail;
		}
		ctr++;

		/*
		 * compute counter-mode password value and stretch to prime
		 *    pwd-seed = H(token | peer-id | server-id | password |
		 *		   counter)
		 */
		hash = eap_pwd_h_init();
		if (hash == NULL)
			goto fail;
		eap_pwd_h_update(hash, token, sizeof(u32));
		eap_pwd_h_update(hash, id_peer, id_peer_len);
		eap_pwd_h_update(hash, id_server, id_server_len);
		eap_pwd_h_update(hash, password, password_len);
//.........这里部分代码省略.........

开发者ID:0x000000FF，项目名称:wpa_supplicant_for_edison，代码行数:101，代码来源:eap_pwd_common.c

示例8: ecparam_main


//.........这里部分代码省略.........
        if (group == NULL)
            BIO_printf(bio_err, "no elliptic curve parameters\n");
        BIO_printf(bio_err, "checking elliptic curve parameters: ");
        if (!EC_GROUP_check(group, NULL)) {
            BIO_printf(bio_err, "failed\n");
            ERR_print_errors(bio_err);
        } else
            BIO_printf(bio_err, "ok\n");

    }

    if (C) {
        size_t buf_len = 0, tmp_len = 0;
        const EC_POINT *point;
        int is_prime, len = 0;
        const EC_METHOD *meth = EC_GROUP_method_of(group);

        if ((ec_p = BN_new()) == NULL
                || (ec_a = BN_new()) == NULL
                || (ec_b = BN_new()) == NULL
                || (ec_gen = BN_new()) == NULL
                || (ec_order = BN_new()) == NULL
                || (ec_cofactor = BN_new()) == NULL) {
            perror("Can't allocate BN");
            goto end;
        }

        is_prime = (EC_METHOD_get_field_type(meth) == NID_X9_62_prime_field);
        if (!is_prime) {
            BIO_printf(bio_err, "Can only handle X9.62 prime fields\n");
            goto end;
        }

        if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a, ec_b, NULL))
            goto end;

        if ((point = EC_GROUP_get0_generator(group)) == NULL)
            goto end;
        if (!EC_POINT_point2bn(group, point,
                               EC_GROUP_get_point_conversion_form(group),
                               ec_gen, NULL))
            goto end;
        if (!EC_GROUP_get_order(group, ec_order, NULL))
            goto end;
        if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
            goto end;

        if (!ec_p || !ec_a || !ec_b || !ec_gen || !ec_order || !ec_cofactor)
            goto end;

        len = BN_num_bits(ec_order);

        if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
            buf_len = tmp_len;
        if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
            buf_len = tmp_len;
        if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
            buf_len = tmp_len;
        if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
            buf_len = tmp_len;
        if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
            buf_len = tmp_len;
        if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
            buf_len = tmp_len;

        buffer = app_malloc(buf_len, "BN buffer");

开发者ID:375670450，项目名称:openssl，代码行数:67，代码来源:ecparam.c

示例9: prime_field_tests

void prime_field_tests()
	{	
	BN_CTX *ctx = NULL;
	BIGNUM *p, *a, *b;
	EC_GROUP *group;
	EC_GROUP *P_160 = NULL, *P_192 = NULL, *P_224 = NULL, *P_256 = NULL, *P_384 = NULL, *P_521 = NULL;
	EC_POINT *P, *Q, *R;
	BIGNUM *x, *y, *z;
	unsigned char buf[100];
	size_t i, len;
	int k;
	
#if 1 /* optional */
	ctx = BN_CTX_new();
	if (!ctx) ABORT;
#endif

	p = BN_new();
	a = BN_new();
	b = BN_new();
	if (!p || !a || !b) ABORT;

	if (!BN_hex2bn(&p, "17")) ABORT;
	if (!BN_hex2bn(&a, "1")) ABORT;
	if (!BN_hex2bn(&b, "1")) ABORT;
	
	group = EC_GROUP_new(EC_GFp_mont_method()); /* applications should use EC_GROUP_new_curve_GFp
	                                             * so that the library gets to choose the EC_METHOD */
	if (!group) ABORT;

	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;

	{
		EC_GROUP *tmp;
		tmp = EC_GROUP_new(EC_GROUP_method_of(group));
		if (!tmp) ABORT;
		if (!EC_GROUP_copy(tmp, group)) ABORT;
		EC_GROUP_free(group);
		group = tmp;
	}
	
	if (!EC_GROUP_get_curve_GFp(group, p, a, b, ctx)) ABORT;

	fprintf(stdout, "Curve defined by Weierstrass equation\n     y^2 = x^3 + a*x + b  (mod 0x");
	BN_print_fp(stdout, p);
	fprintf(stdout, ")\n     a = 0x");
	BN_print_fp(stdout, a);
	fprintf(stdout, "\n     b = 0x");
	BN_print_fp(stdout, b);
	fprintf(stdout, "\n");

	P = EC_POINT_new(group);
	Q = EC_POINT_new(group);
	R = EC_POINT_new(group);
	if (!P || !Q || !R) ABORT;
	
	if (!EC_POINT_set_to_infinity(group, P)) ABORT;
	if (!EC_POINT_is_at_infinity(group, P)) ABORT;

	buf[0] = 0;
	if (!EC_POINT_oct2point(group, Q, buf, 1, ctx)) ABORT;

	if (!EC_POINT_add(group, P, P, Q, ctx)) ABORT;
	if (!EC_POINT_is_at_infinity(group, P)) ABORT;

	x = BN_new();
	y = BN_new();
	z = BN_new();
	if (!x || !y || !z) ABORT;

	if (!BN_hex2bn(&x, "D")) ABORT;
	if (!EC_POINT_set_compressed_coordinates_GFp(group, Q, x, 1, ctx)) ABORT;
	if (!EC_POINT_is_on_curve(group, Q, ctx))
		{
		if (!EC_POINT_get_affine_coordinates_GFp(group, Q, x, y, ctx)) ABORT;
		fprintf(stderr, "Point is not on curve: x = 0x");
		BN_print_fp(stderr, x);
		fprintf(stderr, ", y = 0x");
		BN_print_fp(stderr, y);
		fprintf(stderr, "\n");
		ABORT;
		}

	fprintf(stdout, "A cyclic subgroup:\n");
	k = 100;
	do
		{
		if (k-- == 0) ABORT;

		if (EC_POINT_is_at_infinity(group, P))
			fprintf(stdout, "     point at infinity\n");
		else
			{
			if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;

			fprintf(stdout, "     x = 0x");
			BN_print_fp(stdout, x);
			fprintf(stdout, ", y = 0x");
			BN_print_fp(stdout, y);
			fprintf(stdout, "\n");
//.........这里部分代码省略.........

开发者ID:174high，项目名称:openssl-0.9.8e_linux_porting，代码行数:101，代码来源:ectest.c

示例10: ecdh_im_compute_key

int
ecdh_im_compute_key(PACE_CTX * ctx, const BUF_MEM * s, const BUF_MEM * in,
        BN_CTX *bn_ctx)
{
    int ret = 0;
    BUF_MEM * x_mem = NULL;
    BIGNUM * a = NULL, *b = NULL, *p = NULL;
    BIGNUM * x = NULL, *y = NULL, *v = NULL, *u = NULL;
    BIGNUM * tmp = NULL, *tmp2 = NULL, *bn_inv = NULL;
    BIGNUM * two = NULL, *three = NULL, *four = NULL, *six = NULL;
    BIGNUM * twentyseven = NULL;
    EC_KEY *static_key = NULL, *ephemeral_key = NULL;
    EC_POINT *g = NULL;

    BN_CTX_start(bn_ctx);

    check((ctx && ctx->static_key && s && ctx->ka_ctx), "Invalid arguments"); 

    static_key = EVP_PKEY_get1_EC_KEY(ctx->static_key);
    if (!static_key)
        goto err;

    /* Setup all the variables*/
    a = BN_CTX_get(bn_ctx);
    b = BN_CTX_get(bn_ctx);
    p = BN_CTX_get(bn_ctx);
    x = BN_CTX_get(bn_ctx);
    y = BN_CTX_get(bn_ctx);
    v = BN_CTX_get(bn_ctx);
    two = BN_CTX_get(bn_ctx);
    three = BN_CTX_get(bn_ctx);
    four = BN_CTX_get(bn_ctx);
    six = BN_CTX_get(bn_ctx);
    twentyseven = BN_CTX_get(bn_ctx);
    tmp = BN_CTX_get(bn_ctx);
    tmp2 = BN_CTX_get(bn_ctx);
    bn_inv = BN_CTX_get(bn_ctx);
    if (!bn_inv)
        goto err;

    /* Encrypt the Nonce using the symmetric key in */
    x_mem = cipher_no_pad(ctx->ka_ctx, NULL, in, s, 1);
    if (!x_mem)
        goto err;

    /* Fetch the curve parameters */
    if (!EC_GROUP_get_curve_GFp(EC_KEY_get0_group(static_key), p, a, b, bn_ctx))
        goto err;

    /* Assign constants */
    if (    !BN_set_word(two,2)||
            !BN_set_word(three,3)||
            !BN_set_word(four,4)||
            !BN_set_word(six,6)||
            !BN_set_word(twentyseven,27)
            ) goto err;

    /* Check prerequisites for curve parameters */
    check(
            /* p > 3;*/
           (BN_cmp(p, three) == 1) &&
           /* p mod 3 = 2; (p has the form p=q^n, q prime) */
           BN_nnmod(tmp, p, three, bn_ctx) &&
           (BN_cmp(tmp, two) == 0),
        "Unsuited curve");

    /* Convert encrypted nonce to BIGNUM */
    u = BN_bin2bn((unsigned char *) x_mem->data, x_mem->length, u);
    if (!u)
        goto err;

    if ( /* v = (3a - u^4) / 6u mod p */
            !BN_mod_mul(tmp, three, a, p, bn_ctx) ||
            !BN_mod_exp(tmp2, u, four, p, bn_ctx) ||
            !BN_mod_sub(v, tmp, tmp2, p, bn_ctx) ||
            !BN_mod_mul(tmp, u, six, p, bn_ctx) ||
            /* For division within a galois field we need to compute
             * the multiplicative inverse of a number */
            !BN_mod_inverse(bn_inv, tmp, p, bn_ctx) ||
            !BN_mod_mul(v, v, bn_inv, p, bn_ctx) ||

            /* x = (v^2 - b - ((u^6)/27)) */
            !BN_mod_sqr(tmp, v, p, bn_ctx) ||
            !BN_mod_sub(tmp2, tmp, b, p, bn_ctx) ||
            !BN_mod_exp(tmp, u, six, p, bn_ctx) ||
            !BN_mod_inverse(bn_inv, twentyseven, p, bn_ctx) ||
            !BN_mod_mul(tmp, tmp, bn_inv, p, bn_ctx) ||
            !BN_mod_sub(x, tmp2, tmp, p, bn_ctx) ||

            /* x -> x^(1/3) = x^((2p^n -1)/3) */
            !BN_mul(tmp, two, p, bn_ctx) ||
            !BN_sub(tmp, tmp, BN_value_one()) ||

            /* Division is defined, because p^n = 2 mod 3 */
            !BN_div(tmp, y, tmp, three, bn_ctx) ||
            !BN_mod_exp(tmp2, x, tmp, p, bn_ctx) ||
            !BN_copy(x, tmp2) ||

            /* x += (u^2)/3 */
            !BN_mod_sqr(tmp, u, p, bn_ctx) ||
//.........这里部分代码省略.........

开发者ID:RushOnline，项目名称:openpace，代码行数:101，代码来源:pace_mappings.c

示例11: main

int main(int argc, const char *argv[])
{
	int r;
	int ok = 0;
	char *prog = "ecc";

	
	// libpopt var
	poptContext popt_ctx;
	const char **rest;
	int command = 0;
	char *curve_name = "secp192k1";
	int point_compressed = 0;
	point_conversion_form_t point_form;

	struct poptOption options[] = {
		{"curve-name",		'c', POPT_ARG_STRING, &curve_name, 0,		"elliptic curve name", "NAME"},
		{"point-compressed",	'z', POPT_ARG_NONE, &point_compressed, 0,	"point format, compress or uncompress", NULL},
		{"print-curve",		'p', POPT_ARG_VAL, &command, ECC_PRINT,		"print elliptic curve parameters", NULL},
		{"random-private-key",	 0,  POPT_ARG_VAL, &command, ECC_RAND_SKEY,	"random generate a private key\n", NULL},
		{"random-keypair",	 0,  POPT_ARG_VAL, &command, ECC_RAND_KEYPAIR,	"generate a random key pair\n", NULL},
		{"check-point",		'e', POPT_ARG_VAL, &command, ECC_CHECK_POINT,	"check if point is valid\n", NULL},
		{"point-add",		'a', POPT_ARG_VAL, &command, ECC_ADD,		"elliptic curve point addition", NULL},
		{"point-double",	'b', POPT_ARG_VAL, &command, ECC_DOUBLE,	"elliptic curve point double", NULL},
		{"point-mul",		'x', POPT_ARG_VAL, &command, ECC_MUL,		"k*G", NULL},
		{"point-mul-generator",	'X', POPT_ARG_VAL, &command, ECC_MUL_G,		"elliptic curve point scalar multiply", NULL},
		{"point-invert",	'i', POPT_ARG_VAL, &command, ECC_INVERT,	"elliptic curve point inverse", NULL},
		{"ecdsa-sign",		's', POPT_ARG_VAL, &command, ECC_SIGN,		"ecdsa sign", NULL},
		{"ecdsa-verify",	'v', POPT_ARG_VAL, &command, ECC_VERIFY,	"ecdsa verify", NULL},
		POPT_AUTOHELP
		POPT_TABLEEND
	};

	// openssl var
	EC_GROUP *ec_group = NULL;
	EC_POINT *P = NULL;
	EC_POINT *Q = NULL;
	EC_POINT *R = NULL;
	BIGNUM *k = BN_new();
	BN_CTX *bn_ctx = BN_CTX_new();


	// argument parsing
	popt_ctx = poptGetContext(argv[0], argc, argv, options, 0);
	if ((r = poptGetNextOpt(popt_ctx)) < -1) {
		fprintf(stderr, "%s: bad argument %s: %s\n", argv[0], 
			poptBadOption(popt_ctx, POPT_BADOPTION_NOALIAS), 
			poptStrerror(r));
		goto exit;
	}
	rest = poptGetArgs(popt_ctx);


	// check arguments
	ec_group = EC_GROUP_new_by_curve_name(OBJ_txt2nid(curve_name));
	if (ec_group == NULL) {
		fprintf(stderr, "%s: unknown curve name\n", prog);
		goto exit;
	}

	P = EC_POINT_new(ec_group);
	Q = EC_POINT_new(ec_group);
	R = EC_POINT_new(ec_group);

	point_form = point_compressed ? POINT_CONVERSION_COMPRESSED : POINT_CONVERSION_UNCOMPRESSED;

	switch (command) {
	case ECC_PRINT:
		{
		BIGNUM *p = BN_new();
		BIGNUM *a = BN_new();
		BIGNUM *b = BN_new();
		char *generator;
		BIGNUM *order = BN_new();
		BIGNUM *cofactor = BN_new();

		EC_GROUP_get_curve_GFp(ec_group, p, a, b, bn_ctx);
		generator = EC_POINT_point2hex(ec_group, EC_GROUP_get0_generator(ec_group), point_form, bn_ctx);
		EC_GROUP_get_order(ec_group, order, bn_ctx);
		EC_GROUP_get_cofactor(ec_group, cofactor, bn_ctx);
		
		fprintf(stdout, "Name      : %s\n", OBJ_nid2sn(EC_GROUP_get_curve_name(ec_group)));
		fprintf(stdout, "FieldType : %s\n", "PrimeField");
		fprintf(stdout, "Prime     : %s\n", BN_bn2hex(p));
		fprintf(stdout, "A         : %s\n", BN_bn2hex(a));
		fprintf(stdout, "B         : %s\n", BN_bn2hex(b));
		fprintf(stdout, "Generator : %s\n", generator);
		fprintf(stdout, "Order     : %s\n", BN_bn2hex(order));
		fprintf(stdout, "Cofactor  : %s\n", BN_bn2hex(cofactor));

		BN_free(p);
		BN_free(a);
		BN_free(b);
		BN_free(order);
		BN_free(cofactor);

		break;
		}
	case ECC_CHECK_POINT:
		{
//.........这里部分代码省略.........

开发者ID:LiTianjue，项目名称:GmSSL，代码行数:101，代码来源:ectool.c

示例12: timings

static void timings(EC_GROUP *group, int multi, BN_CTX *ctx)
	{
	clock_t clck;
	int i, j;
	BIGNUM *s, *s0;
	EC_POINT *P;
		
	s = BN_new();
	s0 = BN_new();
	if (s == NULL || s0 == NULL) ABORT;

	if (!EC_GROUP_get_curve_GFp(group, s, NULL, NULL, ctx)) ABORT;
	fprintf(stdout, "Timings for %d bit prime, ", (int)BN_num_bits(s));
	if (!EC_GROUP_get_order(group, s, ctx)) ABORT;
	fprintf(stdout, "%d bit scalars ", (int)BN_num_bits(s));
	fflush(stdout);

	P = EC_POINT_new(group);
	if (P == NULL) ABORT;
	EC_POINT_copy(P, EC_GROUP_get0_generator(group));

	clck = clock();
	for (i = 0; i < 10; i++)
		{
		if (!BN_pseudo_rand(s, BN_num_bits(s), 0, 0)) ABORT;
		if (multi)
			{
			if (!BN_pseudo_rand(s0, BN_num_bits(s), 0, 0)) ABORT;
			}
		for (j = 0; j < 10; j++)
			{
			if (!EC_POINT_mul(group, P, s, multi ? P : NULL, multi ? s0 : NULL, ctx)) ABORT;
			}
		fprintf(stdout, ".");
		fflush(stdout);
		}
	fprintf(stdout, "\n");
	
	clck = clock() - clck;

#ifdef CLOCKS_PER_SEC
	/* "To determine the time in seconds, the value returned
	 * by the clock function should be divided by the value
	 * of the macro CLOCKS_PER_SEC."
	 *                                       -- ISO/IEC 9899 */
#	define UNIT "s"
#else
	/* "`CLOCKS_PER_SEC' undeclared (first use this function)"
	 *                            -- cc on NeXTstep/OpenStep */
#	define UNIT "units"
#	define CLOCKS_PER_SEC 1
#endif

	fprintf(stdout, "%i %s in %.2f " UNIT "\n", i*j,
		multi ? "s*P+t*Q operations" : "point multiplications",
		(double)clck/CLOCKS_PER_SEC);
	fprintf(stdout, "average: %.4f " UNIT "\n", (double)clck/(CLOCKS_PER_SEC*i*j));

	EC_POINT_free(P);
	BN_free(s);
	BN_free(s0);
	}

开发者ID:xyzy，项目名称:mips-openssl_0.9.7，代码行数:62，代码来源:ectest.c

示例13: Z_Gen

void Z_Gen(unsigned char *z, unsigned int klen, unsigned char *ID, unsigned char *x, unsigned char *y)
{
	// Tsp 需要
	// ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA)。

	BN_CTX *ctx = NULL;
	ctx = BN_CTX_new();

	EC_KEY *ec_key = EC_KEY_new_by_curve_name(NID_sm2p256v1);
	const EC_GROUP *ec_group = EC_KEY_get0_group(ec_key);


	BIGNUM *p = NULL, *a = NULL, *b = NULL, *gen = NULL,
		*order = NULL, *cofactor = NULL;

	if ((p = BN_new()) == NULL || (a = BN_new()) == NULL ||
		(b = BN_new()) == NULL || (order = BN_new()) == NULL ||
		(cofactor = BN_new()) == NULL) {
			goto err;
	}

	int is_char_two = 0;
	int tmp_nid = EC_METHOD_get_field_type(EC_GROUP_method_of(ec_group));

	if (tmp_nid == NID_X9_62_characteristic_two_field)
		is_char_two = 1;

#ifndef OPENSSL_NO_EC2M
	if (is_char_two) {
		if (!EC_GROUP_get_curve_GF2m(ec_group, p, a, b, ctx)) {
			goto err;
		}
	} else  /* prime field */
#endif
	{
		if (!EC_GROUP_get_curve_GFp(ec_group, p, a, b, ctx)) {
			goto err;
		}
	}

	const EC_POINT *generator = EC_GROUP_get0_generator(ec_group);

	unsigned char g[65];
	EC_POINT_point2oct(ec_group, generator, POINT_CONVERSION_UNCOMPRESSED, g, ECDH_SIZE, NULL);

	sm3_ctx_t ctx2;

	sm3_init(&ctx2);
	unsigned char entla[2];
	entla[0] = (klen / 32);
	entla[1] = (klen * 8);
	sm3_update(&ctx2, entla, sizeof(entla));
	sm3_update(&ctx2, ID, klen);

	unsigned char buffer[32];
	BN_bn2bin(a, buffer);
	sm3_update(&ctx2, buffer, 32);
	BN_bn2bin(b, buffer);
	sm3_update(&ctx2, buffer, 32);

	sm3_update(&ctx2, g + 1, 64);
	sm3_update(&ctx2, x, 32);
	sm3_update(&ctx2, y, 32);
	sm3_final(&ctx2, z);

err:
	return;
}

开发者ID:chanuei，项目名称:dmverify-analysis，代码行数:68，代码来源:Tcm_crypto.cpp

注：本文中的EC_GROUP_get_curve_GFp函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ EC_GROUP_get_curve_name函数代码示例发布时间：2022-05-30

C++ EC_GROUP_free函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19164|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ EC_GROUP_get_curve_GFp函数代码示例

示例1: openssl_ec_group_parse

示例2: ECDSA_SIG_recover_key_GFp

示例3: compute_password_element

示例4: ecparam_main

示例5: ECPKParameters_print

示例6: BFIBE_setup

示例7: compute_password_element

示例8: ecparam_main

示例9: prime_field_tests

示例10: ecdh_im_compute_key

示例11: main

示例12: timings

示例13: Z_Gen

请发表评论

全部评论

上一篇：

下一篇：

kostub/iosMath: Beautiful math equation

pallet/zi: Maven plugin for clojure

CVE-2022-38625

jonathantribouharet/JTMaterialTransition

CVE-2022-28200

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053