C++ CY_GET_REG16函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CY_GET_REG16函数的典型用法代码示例。如果您正苦于以下问题：C++ CY_GET_REG16函数的具体用法？C++ CY_GET_REG16怎么用？C++ CY_GET_REG16使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CY_GET_REG16函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HeartbeatCounter_ReadPeriod

/*******************************************************************************
* Function Name: HeartbeatCounter_ReadPeriod
********************************************************************************
* Summary:
* Reads the current period value without affecting counter operation.
*
* Parameters:  
*  void:  
*
* Return: 
*  (uint32) Present period value.
*
*******************************************************************************/
uint32 HeartbeatCounter_ReadPeriod(void) 
{
    #if(HeartbeatCounter_UsingFixedFunction)
        return ((uint32)CY_GET_REG16(HeartbeatCounter_PERIOD_LSB_PTR));
    #else
        return (CY_GET_REG32(HeartbeatCounter_PERIOD_LSB_PTR));
    #endif /* (HeartbeatCounter_UsingFixedFunction) */
}

开发者ID:ponioj，项目名称:embedded，代码行数:21，代码来源:HeartbeatCounter.c

示例2: hallTickTimer_ReadPeriod

/*******************************************************************************
* Function Name: hallTickTimer_ReadPeriod
********************************************************************************
*
* Summary:
*  This function returns the current value of the Period.
*
* Parameters:
*  void
*
* Return:
*  The present value of the counter.
*
*******************************************************************************/
uint32 hallTickTimer_ReadPeriod(void) 
{
   #if(hallTickTimer_UsingFixedFunction)
       return ((uint32)CY_GET_REG16(hallTickTimer_PERIOD_LSB_PTR));
   #else
       return (CY_GET_REG32(hallTickTimer_PERIOD_LSB_PTR));
   #endif /* (hallTickTimer_UsingFixedFunction) */
}

开发者ID:cvb0rg，项目名称:PSoC3_TutorialSeries_PIDcontrol，代码行数:22，代码来源:hallTickTimer.c

示例3: Timer_Look_ahead_mode_ReadCapture

/*******************************************************************************
* Function Name: Timer_Look_ahead_mode_ReadCapture
********************************************************************************
*
* Summary:
*  This function returns the last value captured.
*
* Parameters:
*  void
*
* Return:
*  Present Capture value.
*
*******************************************************************************/
uint32 Timer_Look_ahead_mode_ReadCapture(void) 
{
   #if(Timer_Look_ahead_mode_UsingFixedFunction)
       return ((uint32)CY_GET_REG16(Timer_Look_ahead_mode_CAPTURE_LSB_PTR));
   #else
       return (CY_GET_REG24(Timer_Look_ahead_mode_CAPTURE_LSB_PTR));
   #endif /* (Timer_Look_ahead_mode_UsingFixedFunction) */
}

开发者ID:jramshur，项目名称:SRD_Firmware，代码行数:22，代码来源:Timer_Look_ahead_mode.c

示例4: HeartbeatCounter_ReadCapture

/*******************************************************************************
* Function Name: HeartbeatCounter_ReadCapture
********************************************************************************
* Summary:
*   This function returns the last value captured.
*
* Parameters:  
*  void
*
* Return: 
*  (uint32) Present Capture value.
*
*******************************************************************************/
uint32 HeartbeatCounter_ReadCapture(void) 
{
    #if(HeartbeatCounter_UsingFixedFunction)
        return ((uint32)CY_GET_REG16(HeartbeatCounter_STATICCOUNT_LSB_PTR));
    #else
        return (CY_GET_REG32(HeartbeatCounter_STATICCOUNT_LSB_PTR));
    #endif /* (HeartbeatCounter_UsingFixedFunction) */
}

开发者ID:ponioj，项目名称:embedded，代码行数:21，代码来源:HeartbeatCounter.c

示例5: ChargeDelay_ReadPeriod

/*******************************************************************************
* Function Name: ChargeDelay_ReadPeriod
********************************************************************************
*
* Summary:
*  Reads the period value used by the PWM hardware.
*
* Parameters:
*  None
*
* Return:
*  uint8/16: Period value
*
*******************************************************************************/
uint8 ChargeDelay_ReadPeriod(void) 
{
    #if(ChargeDelay_UsingFixedFunction)
        return ((uint8)CY_GET_REG16(ChargeDelay_PERIOD_LSB_PTR));
    #else
        return (CY_GET_REG8(ChargeDelay_PERIOD_LSB_PTR));
    #endif /* (ChargeDelay_UsingFixedFunction) */
}

开发者ID:dmaone，项目名称:CommonSense，代码行数:22，代码来源:ChargeDelay.c

示例6: Timer_Look_ahead_mode_ReadPeriod

/*******************************************************************************
* Function Name: Timer_Look_ahead_mode_ReadPeriod
********************************************************************************
*
* Summary:
*  This function returns the current value of the Period.
*
* Parameters:
*  void
*
* Return:
*  The present value of the counter.
*
*******************************************************************************/
uint32 Timer_Look_ahead_mode_ReadPeriod(void) 
{
   #if(Timer_Look_ahead_mode_UsingFixedFunction)
       return ((uint32)CY_GET_REG16(Timer_Look_ahead_mode_PERIOD_LSB_PTR));
   #else
       return (CY_GET_REG24(Timer_Look_ahead_mode_PERIOD_LSB_PTR));
   #endif /* (Timer_Look_ahead_mode_UsingFixedFunction) */
}

开发者ID:jramshur，项目名称:SRD_Firmware，代码行数:22，代码来源:Timer_Look_ahead_mode.c

示例7: QuadDecoder_Cnt8_ReadPeriod

/*******************************************************************************
* Function Name: QuadDecoder_Cnt8_ReadPeriod
********************************************************************************
* Summary:
* Reads the current period value without affecting counter operation.
*
* Parameters:  
*  void:  
*
* Return: 
*  (uint8) Present period value.
*
*******************************************************************************/
uint8 QuadDecoder_Cnt8_ReadPeriod(void) 
{
    #if(QuadDecoder_Cnt8_UsingFixedFunction)
        return ((uint8)CY_GET_REG16(QuadDecoder_Cnt8_PERIOD_LSB_PTR));
    #else
        return (CY_GET_REG8(QuadDecoder_Cnt8_PERIOD_LSB_PTR));
    #endif /* (QuadDecoder_Cnt8_UsingFixedFunction) */
}

开发者ID:Qmax，项目名称:PT6，代码行数:21，代码来源:QuadDecoder_Cnt8.c

示例8: ChargeDelay_ReadCompare

 /*******************************************************************************
 * Function Name: ChargeDelay_ReadCompare
 ********************************************************************************
 *
 * Summary:
 *  Reads the compare value for the compare output when the PWM Mode parameter is
 *  set to Dither mode, Center Aligned mode, or One Output mode.
 *
 * Parameters:
 *  None
 *
 * Return:
 *  uint8/uint16: Current compare value
 *
 *******************************************************************************/
 uint8 ChargeDelay_ReadCompare(void) 
 {
     #if(ChargeDelay_UsingFixedFunction)
         return ((uint8)CY_GET_REG16(ChargeDelay_COMPARE1_LSB_PTR));
     #else
         return (CY_GET_REG8(ChargeDelay_COMPARE1_LSB_PTR));
     #endif /* (ChargeDelay_UsingFixedFunction) */
 }

开发者ID:dmaone，项目名称:CommonSense，代码行数:23，代码来源:ChargeDelay.c

示例9: TimerC_ReadCapture

/*******************************************************************************
* Function Name: TimerC_ReadCapture
********************************************************************************
*
* Summary:
*  This function returns the last value captured.
*
* Parameters:
*  void
*
* Return:
*  Present Capture value.
*
*******************************************************************************/
uint8 TimerC_ReadCapture(void) 
{
   #if(TimerC_UsingFixedFunction)
       return ((uint8)CY_GET_REG16(TimerC_CAPTURE_LSB_PTR));
   #else
       return (CY_GET_REG8(TimerC_CAPTURE_LSB_PTR));
   #endif /* (TimerC_UsingFixedFunction) */
}

开发者ID:greglandry，项目名称:PSoC，代码行数:22，代码来源:TimerC.c

示例10: QuadDecoder_Cnt8_ReadCapture

/*******************************************************************************
* Function Name: QuadDecoder_Cnt8_ReadCapture
********************************************************************************
* Summary:
*   This function returns the last value captured.
*
* Parameters:  
*  void
*
* Return: 
*  (uint8) Present Capture value.
*
*******************************************************************************/
uint8 QuadDecoder_Cnt8_ReadCapture(void) 
{
    #if(QuadDecoder_Cnt8_UsingFixedFunction)
        return ((uint8)CY_GET_REG16(QuadDecoder_Cnt8_STATICCOUNT_LSB_PTR));
    #else
        return (CY_GET_REG8(QuadDecoder_Cnt8_STATICCOUNT_LSB_PTR));
    #endif /* (QuadDecoder_Cnt8_UsingFixedFunction) */
}

开发者ID:Qmax，项目名称:PT6，代码行数:21，代码来源:QuadDecoder_Cnt8.c

示例11: OSC1_Freq_Timer_3_ReadCapture

/*******************************************************************************
* Function Name: OSC1_Freq_Timer_3_ReadCapture
********************************************************************************
*
* Summary:
*  This function returns the last value captured.
*
* Parameters:
*  void
*
* Return:
*  Present Capture value.
*
*******************************************************************************/
uint32 OSC1_Freq_Timer_3_ReadCapture(void) 
{
   #if(OSC1_Freq_Timer_3_UsingFixedFunction)
       return ((uint32)CY_GET_REG16(OSC1_Freq_Timer_3_CAPTURE_LSB_PTR));
   #else
       return (CY_GET_REG24(OSC1_Freq_Timer_3_CAPTURE_LSB_PTR));
   #endif /* (OSC1_Freq_Timer_3_UsingFixedFunction) */
}

开发者ID:gillspice，项目名称:Dual-PSoC-DCO，代码行数:22，代码来源:OSC1_Freq_Timer_3.c

示例12: OSC1_Freq_Timer_3_ReadPeriod

/*******************************************************************************
* Function Name: OSC1_Freq_Timer_3_ReadPeriod
********************************************************************************
*
* Summary:
*  This function returns the current value of the Period.
*
* Parameters:
*  void
*
* Return:
*  The present value of the counter.
*
*******************************************************************************/
uint32 OSC1_Freq_Timer_3_ReadPeriod(void) 
{
   #if(OSC1_Freq_Timer_3_UsingFixedFunction)
       return ((uint32)CY_GET_REG16(OSC1_Freq_Timer_3_PERIOD_LSB_PTR));
   #else
       return (CY_GET_REG24(OSC1_Freq_Timer_3_PERIOD_LSB_PTR));
   #endif /* (OSC1_Freq_Timer_3_UsingFixedFunction) */
}

开发者ID:gillspice，项目名称:Dual-PSoC-DCO，代码行数:22，代码来源:OSC1_Freq_Timer_3.c

示例13: MotorPWM_ReadPeriod

/*******************************************************************************
* Function Name: MotorPWM_ReadPeriod
********************************************************************************
*
* Summary:
*  Reads the period value used by the PWM hardware.
*
* Parameters:
*  None
*
* Return:
*  uint8/16: Period value
*
*******************************************************************************/
uint8 MotorPWM_ReadPeriod(void) 
{
    #if(MotorPWM_UsingFixedFunction)
        return ((uint8)CY_GET_REG16(MotorPWM_PERIOD_LSB_PTR));
    #else
        return (CY_GET_REG8(MotorPWM_PERIOD_LSB_PTR));
    #endif /* (MotorPWM_UsingFixedFunction) */
}

开发者ID:eamsuwan93，项目名称:PSoC-4-Compass-Sensor，代码行数:22，代码来源:MotorPWM.c

示例14: MotorPWM_ReadCompare

 /*******************************************************************************
 * Function Name: MotorPWM_ReadCompare
 ********************************************************************************
 *
 * Summary:
 *  Reads the compare value for the compare output when the PWM Mode parameter is
 *  set to Dither mode, Center Aligned mode, or One Output mode.
 *
 * Parameters:
 *  None
 *
 * Return:
 *  uint8/uint16: Current compare value
 *
 *******************************************************************************/
 uint8 MotorPWM_ReadCompare(void) 
 {
     #if(MotorPWM_UsingFixedFunction)
         return ((uint8)CY_GET_REG16(MotorPWM_COMPARE1_LSB_PTR));
     #else
         return (CY_GET_REG8(MotorPWM_COMPARE1_LSB_PTR));
     #endif /* (MotorPWM_UsingFixedFunction) */
 }

开发者ID:eamsuwan93，项目名称:PSoC-4-Compass-Sensor，代码行数:23，代码来源:MotorPWM.c

示例15: hallTickTimer_ReadCapture

/*******************************************************************************
* Function Name: hallTickTimer_ReadCapture
********************************************************************************
*
* Summary:
*  This function returns the last value captured.
*
* Parameters:
*  void
*
* Return:
*  Present Capture value.
*
*******************************************************************************/
uint32 hallTickTimer_ReadCapture(void) 
{
   #if(hallTickTimer_UsingFixedFunction)
       return ((uint32)CY_GET_REG16(hallTickTimer_CAPTURE_LSB_PTR));
   #else
       return (CY_GET_REG32(hallTickTimer_CAPTURE_LSB_PTR));
   #endif /* (hallTickTimer_UsingFixedFunction) */
}

开发者ID:cvb0rg，项目名称:PSoC3_TutorialSeries_PIDcontrol，代码行数:22，代码来源:hallTickTimer.c

示例16: LED_SEG_PWM_ReadPeriod

/*******************************************************************************
* Function Name: LED_SEG_PWM_ReadPeriod
********************************************************************************
*
* Summary:
*  Reads the period value used by the PWM hardware.
*
* Parameters:
*  None
*
* Return:
*  uint8/16: Period value
*
*******************************************************************************/
uint8 LED_SEG_PWM_ReadPeriod(void)
{
#if(LED_SEG_PWM_UsingFixedFunction)
    return ((uint8)CY_GET_REG16(LED_SEG_PWM_PERIOD_LSB_PTR));
#else
    return (CY_GET_REG8(LED_SEG_PWM_PERIOD_LSB_PTR));
#endif /* (LED_SEG_PWM_UsingFixedFunction) */
}

开发者ID:remixvit，项目名称:Thermometr，代码行数:22，代码来源:LED_SEG_PWM.c

示例17: PWM_BC_ReadPeriod

/*******************************************************************************
* Function Name: PWM_BC_ReadPeriod
********************************************************************************
* 
* Summary:
*  Reads the period value used by the PWM hardware.
*
* Parameters:  
*  None
*
* Return: 
*  uint8/16: Period value
*
*******************************************************************************/ 
uint8 PWM_BC_ReadPeriod(void) 
{
	#if(PWM_BC_UsingFixedFunction)
        return ((uint8)CY_GET_REG16(PWM_BC_PERIOD_LSB_PTR));
    #else
        return (CY_GET_REG8(PWM_BC_PERIOD_LSB_PTR));
    #endif /* (PWM_BC_UsingFixedFunction) */
}

开发者ID:thurstonzhu，项目名称:ELE302-Carlab，代码行数:22，代码来源:PWM_BC.c

示例18: Left_Phase_Counter_ReadCapture

/*******************************************************************************
* Function Name: Left_Phase_Counter_ReadCapture
********************************************************************************
* Summary:
*   This function returns the last value captured.
*
* Parameters:  
*  void
*
* Return: 
*  (uint32) Present Capture value.
*
*******************************************************************************/
uint32 Left_Phase_Counter_ReadCapture(void) 
{
    #if(Left_Phase_Counter_UsingFixedFunction)
        return ((uint32)CY_GET_REG16(Left_Phase_Counter_STATICCOUNT_LSB_PTR));
    #else
        return (CY_GET_REG32(Left_Phase_Counter_STATICCOUNT_LSB_PTR));
    #endif /* (Left_Phase_Counter_UsingFixedFunction) */
}

开发者ID:tslator，项目名称:SingleBoard-Psoc046，代码行数:21，代码来源:Left_Phase_Counter.c

示例19: Counter_1_ReadPeriod

/*******************************************************************************
* Function Name: Counter_1_ReadPeriod
********************************************************************************
* Summary:
* Reads the current period value without affecting counter operation.
*
* Parameters:
*  void:
*
* Return:
*  (uint8) Present period value.
*
*******************************************************************************/
uint8 Counter_1_ReadPeriod(void)
{
#if(Counter_1_UsingFixedFunction)
    return ((uint8)CY_GET_REG16(Counter_1_PERIOD_LSB_PTR));
#else
    return (CY_GET_REG8(Counter_1_PERIOD_LSB_PTR));
#endif /* (Counter_1_UsingFixedFunction) */
}

开发者ID:addisonElliott，项目名称:ECE381，代码行数:21，代码来源:Counter_1.c

示例20: PWM_BC_ReadCompare

    /*******************************************************************************
    * Function Name: PWM_BC_ReadCompare
    ********************************************************************************
    * 
    * Summary:
    *  Reads the compare value for the compare output when the PWM Mode parameter is 
    *  set to Dither mode, Center Aligned mode, or One Output mode.
    *
    * Parameters:  
    *  None
    *
    * Return: 
    *  uint8/uint16: Current compare value
    *
    *******************************************************************************/  
    uint8 PWM_BC_ReadCompare(void)  
    {
		#if(PWM_BC_UsingFixedFunction)
            return ((uint8)CY_GET_REG16(PWM_BC_COMPARE1_LSB_PTR));
        #else
            return (CY_GET_REG8(PWM_BC_COMPARE1_LSB_PTR));
        #endif /* (PWM_BC_UsingFixedFunction) */
    }

开发者ID:thurstonzhu，项目名称:ELE302-Carlab，代码行数:23，代码来源:PWM_BC.c

注：本文中的CY_GET_REG16函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。