本文整理汇总了C++中CYGARC_HAL_RESTORE_GP函数的典型用法代码示例。如果您正苦于以下问题：C++ CYGARC_HAL_RESTORE_GP函数的具体用法？C++ CYGARC_HAL_RESTORE_GP怎么用？C++ CYGARC_HAL_RESTORE_GP使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了CYGARC_HAL_RESTORE_GP函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
int res = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
cyg_uint32 c;
cyg_uint8 ch;
cyg_uint32 stat;
CYGARC_HAL_SAVE_GP();
*__ctrlc = 0;
HAL_READ_UINT32(chan->base+E7T_UART_STAT, stat);
if ( (stat & E7T_UART_STAT_RDR) != 0 ) {
HAL_READ_UINT32(chan->base+E7T_UART_RXBUF, c);
ch = (cyg_uint8)(c & 0xff);
if( cyg_hal_is_break( &ch , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector_rx);
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:KarenHung，项目名称:ecosgit，代码行数:28，代码来源:hal_diag.c
示例2: cyg_hal_plf_serial_putc
void
cyg_hal_plf_serial_putc(void* __ch_data, cyg_uint8 __ch)
{
CYG_ADDRWORD port;
cyg_uint8 _lsr;
// Some of the diagnostic print code calls through here with no idea what the ch_data is.
// Go ahead and assume it is channels[0].
if (__ch_data == 0)
__ch_data = (void*)&channels[0];
port = ((channel_data_t*)__ch_data)->base;
CYGARC_HAL_SAVE_GP();
do {
HAL_READ_UINT32(port+SER_16550_LSR, _lsr);
} while ((_lsr & SIO_LSR_THRE) == 0);
// Now, the transmit buffer is empty
HAL_WRITE_UINT32(port+SER_16550_THR, __ch);
CYGARC_HAL_RESTORE_GP();
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:25，代码来源:ar7240_serial.c
示例3: cyg_hal_plf_serial_getc_timeout
cyg_bool
cyg_hal_plf_serial_getc_timeout(void* __ch_data, cyg_uint8* ch)
{
int delay_count;
channel_data_t* chan;
cyg_bool res;
CYGARC_HAL_SAVE_GP();
// Some of the diagnostic print code calls through here with no idea what the ch_data is.
// Go ahead and assume it is channels[0].
if (__ch_data == 0)
__ch_data = (void*)&channels[0];
chan = (channel_data_t*)__ch_data;
delay_count = chan->msec_timeout * 10; // delay in .1 ms steps
for(;;) {
res = cyg_hal_plf_serial_getc_nonblock(__ch_data, ch);
if (res || 0 == delay_count--)
break;
CYGACC_CALL_IF_DELAY_US(100);
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:27，代码来源:ar7240_serial.c
示例4: cyg_hal_plf_scif_isr
static int
cyg_hal_plf_scif_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
cyg_uint8 c;
cyg_uint16 fdr, sr;
cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
int res = 0;
CYGARC_HAL_SAVE_GP();
*__ctrlc = 0;
HAL_READ_UINT16(base+_REG_SCFDR, fdr);
if ((fdr & CYGARC_REG_SCIF_SCFDR_RCOUNT_MASK) != 0) {
HAL_READ_UINT8(base+_REG_SCFRDR, c);
// Clear buffer full flag (read back first).
HAL_READ_UINT16(base+_REG_SCSSR, sr);
HAL_WRITE_UINT16(base+_REG_SCSSR,
CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~CYGARC_REG_SCIF_SCSSR_RDF);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:EPiCS，项目名称:reconos_v2，代码行数:29，代码来源:sh3_scif.c
示例5: cyg_hal_plf_scif_putc
void
cyg_hal_plf_scif_putc(void* __ch_data, cyg_uint8 c)
{
cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
cyg_uint16 fdr, sr;
CYGARC_HAL_SAVE_GP();
do {
HAL_READ_UINT16(base+_REG_SCFDR, fdr);
} while (((fdr & CYGARC_REG_SCIF_SCFDR_TCOUNT_MASK) >> CYGARC_REG_SCIF_SCFDR_TCOUNT_shift) == 16);
HAL_WRITE_UINT8(base+_REG_SCFTDR, c);
// Clear FIFO-empty/transmit end flags (read back SR first)
HAL_READ_UINT16(base+_REG_SCSSR, sr);
HAL_WRITE_UINT16(base+_REG_SCSSR, CYGARC_REG_SCIF_SCSSR_CLEARMASK
& ~(CYGARC_REG_SCIF_SCSSR_TDFE | CYGARC_REG_SCIF_SCSSR_TEND ));
// Hang around until the character has been safely sent.
do {
HAL_READ_UINT16(base+_REG_SCFDR, fdr);
} while ((fdr & CYGARC_REG_SCIF_SCFDR_TCOUNT_MASK) != 0);
CYGARC_HAL_RESTORE_GP();
}
开发者ID:EPiCS，项目名称:reconos_v2，代码行数:25，代码来源:sh3_scif.c
示例6: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
int res = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
char c;
cyg_uint32 status;
CYGARC_HAL_SAVE_GP();
cyg_drv_interrupt_acknowledge(chan->isr_vector);
*__ctrlc = 0;
status = GET_STATUS(chan->base);
if ( RX_DATA(status) ) {
c = GET_CHAR(chan->base);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:KarenHung，项目名称:ecosgit，代码行数:27，代码来源:hal_diag.c
示例7: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
int res = 0;
cyg_uint16 status;
cyg_uint16 control;
cyg_uint16 * base = ((channel_data_t *)__ch_data)->base;
CYGARC_HAL_SAVE_GP();
*__ctrlc = 0;
HAL_READ_UINT16(base+CYG_DEV_SERIAL_RS232_SCSR, status);
HAL_READ_UINT16(base+CYG_DEV_SERIAL_RS232_SCCR1, control);
if((status & SCSR_RDRF) && (control & SCCR1_RIE))
{ // Only if the interrupt was caused by the channel
cyg_uint8 c;
c = cyg_hal_plf_serial_getc(__ch_data);
if(cyg_hal_is_break(&c, 1))
*__ctrlc = 1;
HAL_INTERRUPT_ACKNOWLEDGE(((channel_data_t *)__ch_data)->imb3_vector);
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:KarenHung，项目名称:ecosgit，代码行数:33，代码来源:hal_diag.c
示例8: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
int res = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
char c;
cyg_uint8 lsr;
CYGARC_HAL_SAVE_GP();
cyg_drv_interrupt_acknowledge(chan->isr_vector);
*__ctrlc = 0;
HAL_READ_UINT8(chan->base+CYG_DEV_LSR, lsr);
if ( (lsr & SIO_LSR_DR) != 0 ) {
HAL_READ_UINT8(chan->base+CYG_DEV_RBR, c);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:26，代码来源:ser_asb.c
示例9: set_debug_comm
static int
set_debug_comm(int __comm_id)
{
static int __selected_id = CYGNUM_CALL_IF_SET_COMM_ID_EMPTY;
hal_virtual_comm_table_t* __chan;
int interrupt_state = 0;
int res = 1, update = 0;
CYGARC_HAL_SAVE_GP();
CYG_ASSERT(__comm_id >= CYGNUM_CALL_IF_SET_COMM_ID_MANGLER
&& __comm_id < CYGNUM_HAL_VIRTUAL_VECTOR_NUM_CHANNELS,
"Invalid channel");
switch (__comm_id) {
case CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT:
if (__selected_id > 0)
res = __selected_id-1;
else if (__selected_id == 0)
res = CYGNUM_CALL_IF_SET_COMM_ID_MANGLER;
else
res = __selected_id;
break;
case CYGNUM_CALL_IF_SET_COMM_ID_EMPTY:
CYGACC_CALL_IF_DEBUG_PROCS_SET(0);
__selected_id = __comm_id;
break;
case CYGNUM_CALL_IF_SET_COMM_ID_MANGLER:
__comm_id = 0;
update = 1;
break;
default:
__comm_id++; // skip mangler entry
update = 1;
break;
}
if (update) {
// Find the interrupt state of the channel.
__chan = CYGACC_CALL_IF_DEBUG_PROCS();
if (__chan)
interrupt_state = CYGACC_COMM_IF_CONTROL(*__chan, __COMMCTL_IRQ_DISABLE);
__selected_id = __comm_id;
CYGACC_CALL_IF_DEBUG_PROCS_SET(comm_channels[__comm_id]);
// Set interrupt state on the new channel.
__chan = CYGACC_CALL_IF_DEBUG_PROCS();
if (interrupt_state)
CYGACC_COMM_IF_CONTROL(*__chan, __COMMCTL_IRQ_ENABLE);
else
CYGACC_COMM_IF_CONTROL(*__chan, __COMMCTL_IRQ_DISABLE);
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:KarenHung，项目名称:ecosgit，代码行数:59，代码来源:hal_if.c
示例10: cyg_hal_plf_serial_control
static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
static int irq_state = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
int ret = 0;
CYGARC_HAL_SAVE_GP();
switch (__func) {
case __COMMCTL_GETBAUD:
ret = chan->baud_rate;
break;
case __COMMCTL_SETBAUD:
{
va_list ap;
va_start(ap, __func);
ret = chan->baud_rate;
chan->baud_rate = va_arg(ap, cyg_int32);
init_serial_channel(chan);
va_end(ap);
}
break;
case __COMMCTL_IRQ_ENABLE:
HAL_INTERRUPT_SET_LEVEL(chan->imb3_vector, chan->level);
HAL_INTERRUPT_UNMASK(chan->imb3_vector);
HAL_INTERRUPT_UNMASK(chan->siu_vector);
irq_state = 1;
break;
case __COMMCTL_IRQ_DISABLE:
ret = irq_state;
irq_state = 0;
HAL_INTERRUPT_MASK(chan->imb3_vector);
HAL_INTERRUPT_MASK(chan->siu_vector);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->siu_vector;
break;
case __COMMCTL_SET_TIMEOUT:
{
va_list ap;
va_start(ap, __func);
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
va_end(ap);
}
break;
default:
break;
}
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:KarenHung，项目名称:ecosgit，代码行数:57，代码来源:hal_diag.c
示例11: cyg_hal_plf_serial_write
static void cyg_hal_plf_serial_write(void* __ch_data, const cyg_uint8* __buf, cyg_uint32 __len)
{
CYGARC_HAL_SAVE_GP();
while(__len-- > 0)
cyg_hal_plf_serial_putc(__ch_data, *__buf++);
CYGARC_HAL_RESTORE_GP();
}
开发者ID:eartes，项目名称:netx_ecos_port，代码行数:9，代码来源:hal_diag.c
示例12: cyg_hal_plf_serial_read
static void cyg_hal_plf_serial_read(void* __ch_data, cyg_uint8* __buf, cyg_uint32 __len)
{
CYGARC_HAL_SAVE_GP();
while(__len-- > 0)
*__buf++ = cyg_hal_plf_serial_getc(__ch_data);
CYGARC_HAL_RESTORE_GP();
}
开发者ID:eartes，项目名称:netx_ecos_port，代码行数:9，代码来源:hal_diag.c
示例13: cyg_hal_plf_serial_control
static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
static int irq_state = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
int ret = 0;
CYGARC_HAL_SAVE_GP();
switch (__func) {
case __COMMCTL_GETBAUD:
ret = chan->baud_rate;
break;
case __COMMCTL_SETBAUD:
{
va_list ap;
va_start(ap, __func);
ret = chan->baud_rate;
chan->baud_rate = va_arg(ap, cyg_int32);
init_serial_channel(chan);
va_end(ap);
}
break;
case __COMMCTL_IRQ_ENABLE:
// Just enable the interrupt on the IMB3. The debugged application is
// must make sure that the interrupt is properly decoded
HAL_INTERRUPT_UNMASK(chan->imb3_vector);
irq_state = 1;
break;
case __COMMCTL_IRQ_DISABLE:
// Same remark as above
ret = irq_state;
irq_state = 0;
HAL_INTERRUPT_MASK(chan->imb3_vector);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->imb3_vector;
break;
case __COMMCTL_SET_TIMEOUT:
{
va_list ap;
va_start(ap, __func);
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
va_end(ap);
}
break;
default:
break;
}
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:KarenHung，项目名称:ecosgit，代码行数:57，代码来源:hal_diag.c
示例14: cyg_hal_plf_serial_control
static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
static int irq_state = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
cyg_uint16 ser_port_reg;
int ret = 0;
va_list ap;
CYGARC_HAL_SAVE_GP();
va_start(ap, __func);
switch (__func) {
case __COMMCTL_GETBAUD:
ret = chan->baud_rate;
break;
case __COMMCTL_SETBAUD:
chan->baud_rate = va_arg(ap, cyg_int32);
// Should we verify this value here?
cyg_hal_plf_serial_init_channel(chan);
ret = 0;
break;
case __COMMCTL_IRQ_ENABLE:
irq_state = 1;
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
HAL_INTERRUPT_UNMASK(chan->isr_vector);
HAL_READ_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
ser_port_reg |= FREESCALE_ESCI_CR12_RIE;
HAL_WRITE_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
break;
case __COMMCTL_IRQ_DISABLE:
ret = irq_state;
irq_state = 0;
HAL_INTERRUPT_MASK(chan->isr_vector);
HAL_READ_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
ser_port_reg &= ~(cyg_uint16)FREESCALE_ESCI_CR12_RIE;
HAL_WRITE_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->isr_vector;
break;
case __COMMCTL_SET_TIMEOUT:
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
default:
break;
}
va_end(ap);
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:houzhenggang，项目名称:ecos-1，代码行数:56，代码来源:hal_diag.c
示例15: cyg_hal_plf_serial_control
static int
cyg_hal_plf_serial_control(void* __ch_data, __comm_control_cmd_t __func, ...)
{
static int irq_state = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
volatile cyg_uint32* pulBase = chan->pulBase;
int ret = 0;
cyg_uint8 status;
CYGARC_HAL_SAVE_GP();
switch (__func)
{
case __COMMCTL_IRQ_ENABLE:
irq_state = 1;
// Ensure that only Receive ints are generated.
status = pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)];
status |= (MSK_uartcr_RTIE | MSK_uartcr_RIE);
pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)] = status;
HAL_INTERRUPT_UNMASK(chan->isr_vector);
break;
case __COMMCTL_IRQ_DISABLE:
ret = irq_state;
irq_state = 0;
status = pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)];
status &= ~(MSK_uartcr_RTIE | MSK_uartcr_TIE | MSK_uartcr_RIE | MSK_uartcr_MSIE);
pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)] = status;
HAL_INTERRUPT_MASK(chan->isr_vector);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->isr_vector;
break;
case __COMMCTL_SET_TIMEOUT:
{
va_list ap;
va_start(ap, __func);
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
va_end(ap);
}
default:
break;
}
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:eartes，项目名称:netx_ecos_port，代码行数:56，代码来源:hal_diag.c
示例16: cyg_hal_plf_serial_getc
//===========================================================================
// Read single character blocking
//===========================================================================
cyg_uint8 cyg_hal_plf_serial_getc(void* __ch_data)
{
cyg_uint8 ch;
CYGARC_HAL_SAVE_GP();
while(!cyg_hal_plf_serial_getc_nonblock(__ch_data, &ch));
CYGARC_HAL_RESTORE_GP();
return ch;
}
开发者ID:houzhenggang，项目名称:ecos-1，代码行数:13，代码来源:hal_diag.c
示例17: cyg_hal_plf_serial_read
static void CYGOPT_HAL_KINETIS_DIAG_FLASH_SECTION_ATTR
cyg_hal_plf_serial_read(void* __ch_data, cyg_uint8* __buf, cyg_uint32 __len)
{
CYGARC_HAL_SAVE_GP();
while(__len-- > 0)
*__buf++ = cyg_hal_plf_serial_getc(__ch_data);
CYGARC_HAL_RESTORE_GP();
}
开发者ID:benchfox，项目名称:ecos，代码行数:10，代码来源:hal_diag.c
示例18: kill_by_reset
// This is the system's default kill signal routine. Unless overridden
// by the application, it will cause a board reset when GDB quits the
// connection. (The user can avoid the reset by using the GDB 'detach'
// command instead of 'kill' or 'quit').
static int
kill_by_reset(int __irq_nr, void* __regs)
{
CYGARC_HAL_SAVE_GP();
reset();
CYGARC_HAL_RESTORE_GP();
return 0;
}
开发者ID:Joel397，项目名称:Ongoing_work_files，代码行数:14，代码来源:hal_if.c
示例19: cyg_hal_plf_serial_control
static int CYGOPT_HAL_KINETIS_DIAG_FLASH_SECTION_ATTR
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
channel_data_t* chan = (channel_data_t*)__ch_data;
CYG_ADDRESS uart_p = ((channel_data_t*)__ch_data)->base;
cyg_uint8 ser_port_reg;
int ret = 0;
va_list ap;
CYGARC_HAL_SAVE_GP();
va_start(ap, __func);
switch (__func) {
case __COMMCTL_IRQ_ENABLE:
chan->irq_state = 1;
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
HAL_INTERRUPT_UNMASK(chan->isr_vector);
HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
ser_port_reg |= CYGHWR_DEV_FREESCALE_UART_C2_RIE;
HAL_WRITE_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
break;
case __COMMCTL_IRQ_DISABLE:
ret = chan->irq_state;
chan->irq_state = 0;
HAL_INTERRUPT_MASK(chan->isr_vector);
HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
ser_port_reg &= ~(cyg_uint8)CYGHWR_DEV_FREESCALE_UART_C2_RIE;
HAL_WRITE_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->isr_vector;
break;
case __COMMCTL_SET_TIMEOUT:
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
case __COMMCTL_GETBAUD:
ret = chan->baud_rate;
break;
case __COMMCTL_SETBAUD:
chan->baud_rate = va_arg(ap, cyg_int32);
// Should we verify this value here?
cyg_hal_plf_serial_init_channel(chan);
ret = 0;
break;
default:
break;
}
va_end(ap);
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:benchfox，项目名称:ecos，代码行数:55，代码来源:hal_diag.c
示例20: cyg_hal_plf_screen_putc
void
cyg_hal_plf_screen_putc(void *__ch_data, char ch)
{
CYGARC_HAL_SAVE_GP();
switch( ch )
{
case '\n':
NewLine();
return;
case '\r':
XPos = 0;
MoveCursor();
return;
case '\b':
if( XPos == 0 ) return;
XPos--;
MoveCursor();
return;
case '\t':
do
{
DisplayChar(' ');
} while( (XPos % 8) != 0 );
return;
case 0x0c:
ClearScreen();
XPos = YPos = 0;
MoveCursor();
return;
case 1:
ScrollUp(1);
XPos = 0;
YPos = ScreenLength-1;
return;
case 2:
ScrollDown(1);
XPos = 0;
YPos = 0;
return;
default:
DisplayChar(ch);
return;
}
CYGARC_HAL_RESTORE_GP();
}
开发者ID:EPiCS，项目名称:reconos_v2，代码行数:55，代码来源:pcmb_screen.c
注：本文中的CYGARC_HAL_RESTORE_GP函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论