C++ CU_cleanup_registry函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CU_cleanup_registry函数的典型用法代码示例。如果您正苦于以下问题：C++ CU_cleanup_registry函数的具体用法？C++ CU_cleanup_registry怎么用？C++ CU_cleanup_registry使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CU_cleanup_registry函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

/* The main() function for setting up and running the tests.
 * Returns a CUE_SUCCESS on successful running, another
 * CUnit error code on failure.
 * */
int main() {
    ks3_global_init();

    int ret = load_ak_sk();
    if (ret != 0) {
        printf("[ERROR] load ak, sk failed\n");
        return ret;
    }

    ret = CreateBucket(host, bucket);
    if (ret != 0) {
        printf("[ERROR] create bucket failed\n");
        return ret;
    }
    
    CU_pSuite pSuite = NULL;

    /* initialize the CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* add a suite to the registry */
    pSuite = CU_add_suite("Suite_1", init_suite1, clean_suite1);
    if (NULL == pSuite) {
        CU_cleanup_registry();
        ks3_global_destroy();
        return CU_get_error();
    }

    /* add the tests to the suite */
    if (NULL == CU_add_test(pSuite, "test complete multipart para null\n", TEST_COMPLETE_MULTIPART_UPLOAD_ALL_NULL)
        || NULL == CU_add_test(pSuite, "test complete multipart para return code null\n", TEST_COMPLETE_MULTIPART_UPLOAD_RETURNCODE_NULL)
        || NULL == CU_add_test(pSuite, "test complete multipart para host\n", TEST_COMPLETE_MULTIPART_UPLOAD_HOST)
        || NULL == CU_add_test(pSuite, "test complete multipart para bucket\n", TEST_COMPLETE_MULTIPART_UPLOAD_BUCKET)
        || NULL == CU_add_test(pSuite, "test complete multipart para object\n", TEST_COMPLETE_MULTIPART_UPLOAD_OBJECT)
        || NULL == CU_add_test(pSuite, "test complete multipart para key\n", TEST_COMPLETE_MULTIPART_UPLOAD_KEY)
        || NULL == CU_add_test(pSuite, "test complete multipart para data buf\n", TEST_COMPLETE_MULTIPART_UPLOAD_BUFDATAPARA)
        || NULL == CU_add_test(pSuite, "test complete multipart para query\n", TEST_COMPLETE_MULTIPART_UPLOAD_QUERYPARA)
        || NULL == CU_add_test(pSuite, "test complete multipart para header\n", TEST_COMPLETE_MULTIPART_UPLOAD_HEADERPARA)) {
        CU_cleanup_registry();
        ks3_global_destroy();
        return CU_get_error();
    }

    /* Run all tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    CU_cleanup_registry();

    ret = DeleteBucket(host, bucket);
    if (ret != 0) {
        printf("[ERROR] delete bucket failed\n");
    }
    
    ks3_global_destroy();
    return CU_get_error();
}

开发者ID:ks3sdk，项目名称:ks3-c-sdk，代码行数:61，代码来源:complete_multipart_upload.c

示例2: main

int main(int argc, char **argv) {
	// use CUnit test framework
	CU_pSuite pSuite = NULL;

	// initialize the CUnit test registry
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

	// add a suite to the registry 
   pSuite = CU_add_suite("Header", NULL, NULL);
   if(!pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

	// add the tests to the suite
   if(!CU_add_test(pSuite, "First header byte construction", testHeaderFirstByteConstruction)) {
      CU_cleanup_registry();
      return CU_get_error();
	}

   if(!CU_add_test(pSuite, "Method codes", testMethodCodes)) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   if(!CU_add_test(pSuite, "Message ID", testMessageID)) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   if(!CU_add_test(pSuite, "Token insertion", testTokenInsertion)) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   if(!CU_add_test(pSuite, "Option insertion", testOptionInsertion)) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   if(!CU_add_test(pSuite, "URI setting", testURISetting)) {
      CU_cleanup_registry();
      return CU_get_error();
   }

	CU_pTest payloadTest = CU_add_test(pSuite, "Payload setting", testPayload);
   if(!payloadTest) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   // Run all tests using the CUnit Basic interface
   CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_set_error_action(CUEA_ABORT);
   CU_basic_run_tests();
   CU_cleanup_registry();
	//optionInsertionTest();
   return CU_get_error();
}

开发者ID:hongrun007，项目名称:cantcoap，代码行数:60，代码来源:test.cpp

示例3: run_unit_tests

int run_unit_tests()
{
   CU_pSuite pSuite = NULL;

   /* initialize the CUnit test registry */
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

   /* add a suite to the registry */
   pSuite = CU_add_suite("File Scanning", NULL, NULL);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

#ifdef SUPER
//		ms_set_log_level(DEBUG);
//     av_log_set_level(AV_LOG_DEBUG);
   /* add the tests to the ms_scan suite */
   if (
	   NULL == CU_add_test(pSuite, "Simple test of ms_scan()", test_ms_scan) ||
	   NULL == CU_add_test(pSuite, "Test ms_scan() with no paths", test_ms_scan_2) ||
	   NULL == CU_add_test(pSuite, "Test of ms_scan() with too many paths", test_ms_scan_3) ||
	   NULL == CU_add_test(pSuite, "Test of ms_scan() with a bad directory", test_ms_scan_4) ||
// TODO: The following test fails due to the scanner freezing up.
//	   NULL == CU_add_test(pSuite, "Test of ms_scan() with strange path slashes", test_ms_scan_5) ||
	   NULL == CU_add_test(pSuite, "Test of ms_scan()'s progress notifications", test_ms_scan_6) ||
	   NULL == CU_add_test(pSuite, "Test of ms_file_scan()", test_ms_file_scan_1) ||
//NULL == CU_add_test(pSuite, "Test of scanning LOTS of files", test_ms_large_directory) ||
	   NULL == CU_add_test(pSuite, "Test of misc functions", test_ms_misc_functions) ||
  	   NULL == CU_add_test(pSuite, "Simple test of ASF audio file", test_ms_file_asf_audio) ||
   	   NULL == CU_add_test(pSuite, "Test Berkeley database functionality", test_ms_db)

	   )
   {
      CU_cleanup_registry();
      return CU_get_error();
   }
#endif

//   setupbackground_tests();
   setupdefect_tests();
//   setupimage_tests();
//	 setup_thumbnail_tests();

   /* Run all tests using the CUnit Basic interface */
   CU_basic_set_mode(CU_BRM_VERBOSE);
   CU_basic_run_tests();
//	CU_automated_run_tests();

   CU_cleanup_registry();
   return CU_get_error();
} /* run_unit_tests() */

开发者ID:chincheta0815，项目名称:libmediascan，代码行数:53，代码来源:test.c

示例4: test_main

static void
test_main(spdk_event_t event)
{
	CU_pSuite suite = NULL;
	unsigned int num_failures;

	if (bdevio_construct_targets() < 0) {
		spdk_app_stop(-1);
		return;
	}

	if (CU_initialize_registry() != CUE_SUCCESS) {
		spdk_app_stop(CU_get_error());
		return;
	}

	suite = CU_add_suite("components_suite", NULL, NULL);
	if (suite == NULL) {
		CU_cleanup_registry();
		spdk_app_stop(CU_get_error());
		return;
	}

	if (
		CU_add_test(suite, "blockdev write read 4k", blockdev_write_read_4k) == NULL
		|| CU_add_test(suite, "blockdev write read 512 bytes",
			       blockdev_write_read_512Bytes) == NULL
		|| CU_add_test(suite, "blockdev write read size > 128k",
			       blockdev_write_read_size_gt_128k) == NULL
		|| CU_add_test(suite, "blockdev write read invalid size",
			       blockdev_write_read_invalid_size) == NULL
		|| CU_add_test(suite, "blockdev write read offset + nbytes == size of blockdev",
			       blockdev_write_read_offset_plus_nbytes_equals_bdev_size) == NULL
		|| CU_add_test(suite, "blockdev write read offset + nbytes > size of blockdev",
			       blockdev_write_read_offset_plus_nbytes_gt_bdev_size) == NULL
		|| CU_add_test(suite, "blockdev write read max offset",
			       blockdev_write_read_max_offset) == NULL
		|| CU_add_test(suite, "blockdev write read 8k on overlapped address offset",
			       blockdev_overlapped_write_read_8k) == NULL
	) {
		CU_cleanup_registry();
		spdk_app_stop(CU_get_error());
		return;
	}

	pthread_mutex_init(&g_test_mutex, NULL);
	pthread_cond_init(&g_test_cond, NULL);
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
	num_failures = CU_get_number_of_failures();
	CU_cleanup_registry();
	spdk_app_stop(num_failures);
}

开发者ID:weber-wenbo-wang，项目名称:spdk，代码行数:53，代码来源:bdevio.c

示例5: main

int main(int argc, char *argv[]) {
	CU_ErrorCode error;

	/**
	 * Definizione dei test array
	 * NOTA ? L?ORDINE DI INSERIMENTO E? IMPORTANTE
	 */
	CU_TestInfo test_array_conta_parole_bis[] = { {
			"test di conta_parole_bis()", test_conta_parole_bis },
			CU_TEST_INFO_NULL, };

	/**
	 * crea le suite e vi aggiunge i test array
	 * NOTA ? L?ORDINE DI INSERIMENTO E? IMPORTANTE
	 */
	CU_SuiteInfo suites[] = { { "test suite per conta_parole_bis ",
			suite_void_init, suite_void_cleanup, test_array_conta_parole_bis },

	CU_SUITE_INFO_NULL, };

	/* inizializza registro ? e? la prima istruzione */
	if (CUE_SUCCESS != CU_initialize_registry()) {
		error = CU_get_error();
		system("PAUSE");
		return -1;
	}

	// add the suites to the registry
	error = CU_register_suites(suites);

	if (CUE_SUCCESS != error) {
		CU_cleanup_registry();
		error = CU_get_error();
		system("PAUSE");
		return -1;
	}

	/**
	 * Esegue tutti i casi di test con output sulla console
	 */
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();

	/**
	 * Pulisce il registro e termina lo unit test
	 **/

	CU_cleanup_registry();

	//system("PAUSE");

	return error;
}

开发者ID:kiuz，项目名称:C-Unit-Br，代码行数:53，代码来源:vector_list.c

示例6: main

int main(int argc, char **argv) {

    if (argc == 2 && (strcmp(argv[1], "--help") == 0 || strcmp(argv[1], "-h") == 0)) {
        fprintf(stderr, "usage %s [test prefix]\n\ntest options:\n", argv[0]);
        for (test_case_t *p = test_cases; p != NULL; p = p->next) {
            fprintf(stderr, " %s\n", p->description);
        }
        return EXIT_FAILURE;
    }

    if (CU_initialize_registry() != CUE_SUCCESS) {
        CU_ErrorCode err = CU_get_error();
        fprintf(stderr, "failed to initialise CUnit registry\n");
        return err;
    }

    CU_pSuite suite = CU_add_suite("passwand", NULL, NULL);
    if (suite == NULL) {
        CU_ErrorCode err = CU_get_error();
        CU_cleanup_registry();
        fprintf(stderr, "failed to add suite\n");
        return err;
    }

    unsigned total = 0;
    for (test_case_t *p = test_cases; p != NULL; p = p->next) {
        if (argc == 1 || strncmp(argv[1], p->description, strlen(argv[1])) == 0) {
            if (CU_add_test(suite, p->description, p->function) == NULL) {
                CU_ErrorCode err = CU_get_error();
                fprintf(stderr, "failed to add test \"%s\"\n", p->description);
                CU_cleanup_registry();
                return err;
            }
            total++;
        }
    }

    if (total == 0) {
        fprintf(stderr, "no tests found\n");
        return EXIT_FAILURE;
    }

    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();

    unsigned failed = CU_get_number_of_tests_failed();

    CU_cleanup_registry();

    printf("%u/%u passed\n", total - failed, total);

    return failed > 0 ? EXIT_FAILURE : EXIT_SUCCESS;
}

开发者ID:Smattr，项目名称:passwand，代码行数:53，代码来源:main.c

示例7: main

/*
 * Main
 */
int
main(void)
{
	CU_pSuite ptr_suite = NULL;
	int nr_of_failed_tests = 0;
	int nr_of_failed_suites = 0;

	/* Initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	/* add a suite to the registry */
	ptr_suite = CU_add_suite("ofp port config", init_suite, clean_suite);
	if (NULL == ptr_suite) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (NULL == CU_ADD_TEST(ptr_suite,
				test_sinlge_port_basic)) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (NULL == CU_ADD_TEST(ptr_suite,
				test_two_ports_vlan)) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (NULL == CU_ADD_TEST(ptr_suite,
				test_gre_port)) {
		CU_cleanup_registry();
		return CU_get_error();
	}

#if OFP_TESTMODE_AUTO
	CU_set_output_filename("CUnit-Port-conf");
	CU_automated_run_tests();
#else
	/* Run all tests using the CUnit Basic interface */
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
#endif

	nr_of_failed_tests = CU_get_number_of_tests_failed();
	nr_of_failed_suites = CU_get_number_of_suites_failed();
	CU_cleanup_registry();

	return (nr_of_failed_suites > 0 ?
		nr_of_failed_suites : nr_of_failed_tests);
}

开发者ID:babubalu，项目名称:ofp，代码行数:55，代码来源:ofp_test_port_conf.c

示例8: main

int main()
{
    CU_pSuite pSuite = NULL;

    /* Init CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* Add suite to the registry */
    pSuite = CU_add_suite("yee_common", init_testsuite1, clean_testsuite1);
    if (!pSuite) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Add the tests to the suite */
    if (!CU_add_test(pSuite, "py_alloc_field", test_alloc_field)
        || !CU_add_test(pSuite, "py_set_grid", test_set_grid)
        || !CU_add_test(pSuite, "py_vec_func", test_vec_func)
        || !CU_add_test(pSuite, "py_vec_func2d", test_vec_func2d)
        || !CU_add_test(pSuite, "py_apply_func", test_apply_func)
        || !CU_add_test(pSuite, "py_init_acoustic_field",
                        test_init_acoustic_field)
        || !CU_add_test(pSuite, "py_init_local_acoustic_field",
                        test_init_local_acoustic_field)
        || !CU_add_test(pSuite, "py_assign_to, get_from",
                        test_assign_and_get)
        || !CU_add_test(pSuite, "py_set_boundary", test_set_boundary)
        || !CU_add_test(pSuite, "py_leapfrog", test_leapfrog)
        || !CU_add_test(pSuite, "py_partition_grid", test_partition_grid)
        || !CU_add_test(pSuite, "py_get_partition_coords",
                        test_get_partition_coords)
        /*|| !CU_add_test(pSuite, "py_expand_indices", test_expand_indices) */
        /*|| !CU_add_test(pSuite, "py_verify_grid_integrity", test_verify_grid) */
        /*|| !CU_add_test(pSuite, "py_set_local_index", test_set_local_index) */
        || !CU_add_test(pSuite, "py_parse_cmdline", test_parse_cmdline)
        || !CU_add_test(pSuite, "py_zero", test_zero)
        || !CU_add_test(pSuite, "py_zero2d", test_zero2d)
        || !CU_add_test(pSuite, "py_identity", test_identity)
        || !CU_add_test(pSuite, "py_identity2d", test_identity)
        || !CU_add_test(pSuite, "py_round_up_divide",
                        test_round_up_divide)) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Run all the tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    CU_cleanup_registry();
    return CU_get_error();
}

开发者ID:octol，项目名称:paryee，代码行数:52，代码来源:yee_common_tests.c

示例9: us894_add_suite

/* The main() function for setting up and running the tests.
 * Returns a CUE_SUCCESS on successful running, another
 * CUnit error code on failure.
 */
int us894_add_suite (void)
{
#ifdef HAVE_CUNIT
   CU_pSuite pSuite = NULL;

   /* add a suite to the registry */
   pSuite = CU_add_suite("us894_proxy_cacerts", 
	                  us894_init_suite, 
			  us894_destroy_suite);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* add the tests to the suite */
   /* NOTE - ORDER IS IMPORTANT - MUST TEST fread() AFTER fprintf() */
   if ((NULL == CU_add_test(pSuite, "HTTP Basic Auth", us894_test1)) ||
       (NULL == CU_add_test(pSuite, "HTTP Basic Auth Fail", us894_test2)) ||
       (NULL == CU_add_test(pSuite, "HTTP Digest Auth", us894_test3)) ||
       (NULL == CU_add_test(pSuite, "HTTP Digest Auth Fail", us894_test4)) ||
       (NULL == CU_add_test(pSuite, "Get CA Certificates", us894_test5)) ||
       (NULL == CU_add_test(pSuite, "SSL 3.0 Fail", us894_test6)) ||
       (NULL == CU_add_test(pSuite, "TLS 1.0 Fail", us894_test7)) ||
       (NULL == CU_add_test(pSuite, "TLS 1.1", us894_test8)) ||
       (NULL == CU_add_test(pSuite, "TLS 1.2", us894_test9)) || 
       (NULL == CU_add_test(pSuite, "Certificate auth - explicit cert chain", us894_test10)) ||
       (NULL == CU_add_test(pSuite, "Certificate auth - implicit cert chain", us894_test11)) || 
       (NULL == CU_add_test(pSuite, "Certificate auth - revoked cert", us894_test12)) || 
       (NULL == CU_add_test(pSuite, "Certificate auth - self-signed cert", us894_test13)) ||
       (NULL == CU_add_test(pSuite, "Anon cipher suite disabled", us894_test14)) || 
       (NULL == CU_add_test(pSuite, "NULL Realm", us894_test15)) ||
       (NULL == CU_add_test(pSuite, "NULL server cert", us894_test16)) ||
       (NULL == CU_add_test(pSuite, "NULL server key", us894_test17)) ||
       (NULL == CU_add_test(pSuite, "NULL local CA chain", us894_test18)) || 
       (NULL == CU_add_test(pSuite, "Corrupted local CA chain", us894_test19)) || 
       (NULL == CU_add_test(pSuite, "HTTP POST cacerts", us894_test20)) ||
       (NULL == CU_add_test(pSuite, "SimpleEnroll - good HTTP auth/good Cert", us894_test21)) ||
       (NULL == CU_add_test(pSuite, "SimpleEnroll - bad HTTP auth/good Cert", us894_test22)) ||
       (NULL == CU_add_test(pSuite, "SimpleEnroll - no HTTP auth/no Cert", us894_test23)) ||
       (NULL == CU_add_test(pSuite, "Set Server Invalid parameters", us894_test24)) ||
       (NULL == CU_add_test(pSuite, "Set Auth Mode Invalid parameters", us894_test25)) ||
       (NULL == CU_add_test(pSuite, "Optional CA Chain Response", us894_test26)) ||
       (NULL == CU_add_test(pSuite, "Bad userid/password for proxy init", us894_test27)))
   {
      CU_cleanup_registry();
      return CU_get_error();
   }

   return CUE_SUCCESS;
#endif
}

开发者ID:DDvO，项目名称:libest，代码行数:55，代码来源:us894.c

示例10: main

int main() {
    unsigned int result;
    CU_pSuite pSuite = NULL;

    /* Initialize the CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* Add a suite to the registry */
    pSuite = CU_add_suite("SCPI Utils", init_suite, clean_suite);
    if (NULL == pSuite) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Add the tests to the suite */
    if (0
            || (NULL == CU_add_test(pSuite, "strnpbrk", test_strnpbrk))
            || (NULL == CU_add_test(pSuite, "Int32ToStr", test_Int32ToStr))
            || (NULL == CU_add_test(pSuite, "UInt32ToStrBase", test_UInt32ToStrBase))
            || (NULL == CU_add_test(pSuite, "Int64ToStr", test_Int64ToStr))
            || (NULL == CU_add_test(pSuite, "UInt64ToStrBase", test_UInt64ToStrBase))
            || (NULL == CU_add_test(pSuite, "SCPI_dtostre", test_scpi_dtostre))
            || (NULL == CU_add_test(pSuite, "floatToStr", test_floatToStr))
            || (NULL == CU_add_test(pSuite, "doubleToStr", test_doubleToStr))
            || (NULL == CU_add_test(pSuite, "strBaseToInt32", test_strBaseToInt32))
            || (NULL == CU_add_test(pSuite, "strBaseToUInt32", test_strBaseToUInt32))
            || (NULL == CU_add_test(pSuite, "strBaseToInt64", test_strBaseToInt64))
            || (NULL == CU_add_test(pSuite, "strBaseToUInt64", test_strBaseToUInt64))
            || (NULL == CU_add_test(pSuite, "strToDouble", test_strToDouble))
            || (NULL == CU_add_test(pSuite, "compareStr", test_compareStr))
            || (NULL == CU_add_test(pSuite, "compareStrAndNum", test_compareStrAndNum))
            || (NULL == CU_add_test(pSuite, "matchPattern", test_matchPattern))
            || (NULL == CU_add_test(pSuite, "matchCommand", test_matchCommand))
            || (NULL == CU_add_test(pSuite, "composeCompoundCommand", test_composeCompoundCommand))
            || (NULL == CU_add_test(pSuite, "swap", test_swap))
#if USE_DEVICE_DEPENDENT_ERROR_INFORMATION && !USE_MEMORY_ALLOCATION_FREE
            || (NULL == CU_add_test(pSuite, "heap", test_heap))
#endif
            ) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Run all tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    result = CU_get_number_of_tests_failed();
    CU_cleanup_registry();
    return result ? result : CU_get_error();
}

开发者ID:llahti，项目名称:scpi-parser，代码行数:51，代码来源:test_scpi_utils.c

示例11: test_string

CU_ErrorCode test_string(CU_pSuite suite){
    suite = CU_add_suite("CryString Tests (test_string.c)", before_all_test_string, after_all_test_string);
    if(suite == NULL){
       CU_cleanup_registry();
       return CU_get_error();
    }

    if( (CU_add_test(suite, "String's tests are not done yet!", test_missing_strings_tests ) == NULL ) ){
       CU_cleanup_registry();
       return CU_get_error();
    }

    return CUE_SUCCESS;
}

开发者ID:dalthon，项目名称:Cryml，代码行数:14，代码来源:test_string.c

示例12: main

int main (void)
{

CU_pSuite pSuite = NULL;

   /* initialize the CUnit test registry */
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

   /* add a suite to the registry */
   pSuite = CU_add_suite("Suite1", init_suite1, clean_suite1);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* add the tests to the suite */

   if ((NULL == CU_add_test(pSuite, " 1: Requesting a single record in a compressed warc file", test1)) ||
       (NULL == CU_add_test(pSuite, " 2: Requesting a whole warc file", test2)) ||
       (NULL == CU_add_test(pSuite, " 3: sending a bad request", test3)) ||
       (NULL == CU_add_test(pSuite,"  4: sending a filter request", test4)) ||
       (NULL == CU_add_test(pSuite,"  5: sending a List request with severral output format", test5)))
   {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* Run all tests using the automated interface*/ 
    switch (menu()) 
  {
        case 1: {CU_console_run_tests(); break;} 
	case 2:  {
                       
                           case 21: {CU_basic_set_mode(CU_BRM_NORMAL); CU_basic_run_tests(); break;}
                            case 22:{CU_basic_set_mode(CU_BRM_VERBOSE ); CU_basic_run_tests(); break;}
                             case 23:{CU_basic_set_mode(CU_BRM_SILENT); CU_basic_run_tests(); break;}  

                              }
        case 3:{
                CU_set_output_filename("./utest/outputs/client");
    		CU_set_output_filename("./utest/outputs/client" );
  		CU_automated_run_tests();
   		CU_list_tests_to_file();
           	break;}
   }

   CU_cleanup_registry();
   return CU_get_error();
}

开发者ID:andbrain，项目名称:warc-tools，代码行数:50，代码来源:client.c

示例13: main

int
main(int argc, char **argv)
{
	CU_pSuite	suite = NULL;
	unsigned int 	num_failures;

	if (CU_initialize_registry() != CUE_SUCCESS) {
		return CU_get_error();
	}

	suite = CU_add_suite("scsi_suite", null_init, null_clean);
	if (suite == NULL) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (
		CU_add_test(suite, "scsi init - set default scsi params", \
			    scsi_init_sp_null) == NULL
		|| CU_add_test(suite, "scsi init - set max_unmap_lba_count", \
			       scsi_init_set_max_unmap_lba_count_config_param) == NULL
		|| CU_add_test(suite, "scsi init - set max_unmap_block_descriptor_count", \
			       scsi_init_set_max_unmap_block_descriptor_count_config_param) == NULL
		|| CU_add_test(suite, "scsi init - set optimal_unmap_granularity", \
			       scsi_init_set_optimal_unmap_granularity_config_param) == NULL
		|| CU_add_test(suite, "scsi init - set unmap_granularity_alignment", \
			       scsi_init_set_unmap_granularity_alignment_config_param) == NULL
		|| CU_add_test(suite, "scsi init - ugavalid value yes", \
			       scsi_init_ugavalid_yes) == NULL
		|| CU_add_test(suite, "scsi init - ugavalid value no", \
			       scsi_init_ugavalid_no) == NULL
		|| CU_add_test(suite, "scsi init - ugavalid unknown value", \
			       scsi_init_ugavalid_unknown_value_failure) == NULL
		|| CU_add_test(suite, "scsi init - set max_write_same_length", \
			       scsi_init_max_write_same_length) == NULL
		|| CU_add_test(suite, "scsi init - read config scsi parameters", \
			       scsi_init_read_config_scsi_params) == NULL
		|| CU_add_test(suite, "scsi init - success", scsi_init_success) == NULL
	) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
	num_failures = CU_get_number_of_failures();
	CU_cleanup_registry();
	return num_failures;
}

开发者ID:spdk，项目名称:spdk，代码行数:49，代码来源:init_ut.c

示例14: main

int
main(int argc, char **argv)
{
  CU_pSuite pSuite = NULL;

  putenv("LC_ALL=C");
  putenv("LANG=C");
  
  /* initialize the CUnit test registry */
  if(CUE_SUCCESS != CU_initialize_registry()){
    return CU_get_error();
  }

  /* remove a suite to the registry */
  pSuite = CU_add_suite("AgsConnectableTest", ags_connectable_test_init_suite, ags_connectable_test_clean_suite);
  
  if(pSuite == NULL){
    CU_cleanup_registry();
    
    return CU_get_error();
  }

  /* remove the tests to the suite */
  if((CU_add_test(pSuite, "test of AgsConnectable get uuid", ags_connectable_test_get_uuid) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable has resource", ags_connectable_test_has_resource) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable is ready", ags_connectable_test_is_ready) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable add to registry", ags_connectable_test_add_to_registry) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable remove from registry", ags_connectable_test_remove_from_registry) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable list resource", ags_connectable_test_list_resource) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable xml compose", ags_connectable_test_xml_compose) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable xml parse", ags_connectable_test_xml_parse) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable is connected", ags_connectable_test_is_connected) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable connect", ags_connectable_test_connect) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable disconnect", ags_connectable_test_disconnect) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable connect connection", ags_connectable_test_connect_connection) == NULL) ||
     (CU_add_test(pSuite, "test of AgsConnectable disconnect connection", ags_connectable_test_disconnect_connection) == NULL)){
    CU_cleanup_registry();
    
    return CU_get_error();
  }
  
  /* Run all tests using the CUnit Basic interface */
  CU_basic_set_mode(CU_BRM_VERBOSE);
  CU_basic_run_tests();
  
  CU_cleanup_registry();
  
  return(CU_get_error());
}

开发者ID:gsequencer，项目名称:gsequencer，代码行数:49，代码来源:ags_connectable_test.c

示例15: hello_test_register

int hello_test_register(CU_pSuite pSuite)
{
   /* add a suite to the registry */
   pSuite = CU_add_suite("Suite_hello", hello_test_init_suite, hello_test_clean_suite);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   if ((NULL == CU_add_test(pSuite, "hello::get_msg", hello_test_get_msg)))
   {
      CU_cleanup_registry();
      return CU_get_error();
   }
}

开发者ID:gshuisheng，项目名称:autotools-template，代码行数:15，代码来源:hello.c

示例16: main

int main(int argc, char **argv) {
    CU_pSuite suite = NULL;

    if(CU_initialize_registry() != CUE_SUCCESS) {
        return CU_get_error();
    }

    // Init suite
    suite = CU_add_suite("Shadowdive", NULL, NULL);
    if(suite == NULL) {
        goto end;
    }
    
    // Add tests
    if(CU_add_test(suite, "test of sd_bk_create", test_sd_bk_create) == NULL) { goto end; }
    if(CU_add_test(suite, "test of sd_bk_delete", test_sd_bk_delete) == NULL) { goto end; }
    if(CU_add_test(suite, "test of sd_af_create", test_sd_af_create) == NULL) { goto end; }
    if(CU_add_test(suite, "test of sd_af_delete", test_sd_af_delete) == NULL) { goto end; }

    // Run tests
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
   
end:
    CU_cleanup_registry();
    return CU_get_error();
}

开发者ID:rev22，项目名称:libShadowDive，代码行数:27，代码来源:test_lib.c

示例17: main

int main(
        const int argc,
        const char* const * argv)
{
    int exitCode = 1;

    if (log_init(argv[0])) {
        log_syserr("Couldn't initialize logging module");
        exitCode = EXIT_FAILURE;
    }
    else {
        if (CUE_SUCCESS == CU_initialize_registry()) {
            CU_Suite* testSuite = CU_add_suite(__FILE__, setup, teardown);

            if (NULL != testSuite) {
                if (CU_ADD_TEST(testSuite, test_socketpair)) {
                    CU_basic_set_mode(CU_BRM_VERBOSE);
                    (void) CU_basic_run_tests();
                }
            }

            exitCode = CU_get_number_of_tests_failed();
            CU_cleanup_registry();
        }

        log_fini();
    }

    return exitCode;
}

开发者ID:Unidata，项目名称:LDM，代码行数:30，代码来源:socketpair_test.c

示例18: bc_tester_uninit

void bc_tester_uninit() {
	/* Redisplay list of failed tests on end */
	if (CU_get_number_of_failure_records()){
		CU_basic_show_failures(CU_get_failure_list());
	}
	CU_cleanup_registry();
	/*add missing final newline*/
	bc_tester_printf(bc_printf_verbosity_info,"");

	if( xml_enabled ){
		/*create real xml file only if tester did not crash*/
		size_t size = strlen(xml_file) + strlen(".tmp-Results.xml") + 1;
		char * xml_tmp_file = malloc(sizeof(char) * size);
		snprintf(xml_tmp_file, size, "%s.tmp-Results.xml", xml_file);
		rename(xml_tmp_file, xml_file);
		free(xml_tmp_file);
	}

	if (test_suite != NULL) {
		free(test_suite);
		test_suite = NULL;
		nb_test_suites = 0;
	}

	if (bc_tester_resource_dir_prefix != NULL) {
		free(bc_tester_resource_dir_prefix);
		bc_tester_resource_dir_prefix = NULL;
	}
	if (bc_tester_writable_dir_prefix != NULL) {
		free(bc_tester_writable_dir_prefix);
		bc_tester_writable_dir_prefix = NULL;
	}
}

开发者ID:videomedicine，项目名称:belle-sip，代码行数:33，代码来源:bc_tester_utils.c

示例19: main

int
main(
    const int     argc,
    char* const*  argv)
{
    int         exitCode = EXIT_FAILURE;

    if (CUE_SUCCESS == CU_initialize_registry()) {
        CU_Suite*       testSuite = CU_add_suite(__FILE__, setup, teardown);

        if (NULL != testSuite) {
            CU_ADD_TEST(testSuite, test_getDottedDecimal);
#           if WANT_MULTICAST
            CU_ADD_TEST(testSuite, test_sa_getInetSockAddr);
            CU_ADD_TEST(testSuite, test_sa_getInet6SockAddr);
            CU_ADD_TEST(testSuite, test_sa_parse);
            CU_ADD_TEST(testSuite, test_sa_parseWithDefaults);
#           endif

            if (log_init(argv[0])) {
                (void)fprintf(stderr, "Couldn't open logging system\n");
            }
            else {
                if (CU_basic_run_tests() == CUE_SUCCESS) {
                    if (0 == CU_get_number_of_failures())
                        exitCode = EXIT_SUCCESS;
                }
            }
        }

        CU_cleanup_registry();
    }                           /* CUnit registery allocated */

    return exitCode;
}

开发者ID:Unidata，项目名称:LDM，代码行数:35，代码来源:test_inetutil.c

示例20: main

/* The main() function for setting up and running the tests.
 * Returns a CUE_SUCCESS on successful running, another
 * CUnit error code on failure.
 */
int main()
{
	int err_code = 0;

	/* initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	/* create suites, order is important */
	if ( (err_code = build_suite__types())       ||
	     (err_code = build_suite__stub_memdev()) ||
	     (err_code = build_suite__somefs())      ||
	     (err_code = build_suite__smartfs())     ||
	     (err_code = build_suite__flxio())       ||
	     (err_code = build_suite__apdu()))
	{
		return err_code;
	}

	/* Run all tests using the CUnit Basic interface */
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
	CU_cleanup_registry();

	return CU_get_error();
}

开发者ID:FlexCOS，项目名称:code，代码行数:30，代码来源:main.c

注：本文中的CU_cleanup_registry函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CU_initialize_registry函数代码示例发布时间：2022-05-30

C++ CU_basic_set_mode函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19158|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8633|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ CU_cleanup_registry函数代码示例

示例1: main

示例2: main

示例3: run_unit_tests

示例4: test_main

示例5: main

示例6: main

示例7: main

示例8: main

示例9: us894_add_suite

示例10: main

示例11: test_string

示例12: main

示例13: main

示例14: main

示例15: hello_test_register

示例16: main

示例17: main

示例18: bc_tester_uninit

示例19: main

示例20: main

请发表评论

全部评论

上一篇：

下一篇：

AdamWagner/stackline: Visualize yabai wi

OpenNBS/OpenNoteBlockStudio: An open-sou

TingsongYu/cascaded_mobilenet-v2: cascad

[转载]Delphi版everything、光速搜索代码

JunichiT/JTMaterialSwitch: A Customizabl

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053