C++ CU_basic_run_tests函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CU_basic_run_tests函数的典型用法代码示例。如果您正苦于以下问题：C++ CU_basic_run_tests函数的具体用法？C++ CU_basic_run_tests怎么用？C++ CU_basic_run_tests使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CU_basic_run_tests函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int
main(int argc, char **argv)
{
	CU_pSuite	suite = NULL;
	unsigned int	num_failures;

	if (CU_initialize_registry() != CUE_SUCCESS) {
		return CU_get_error();
	}

	suite = CU_add_suite("bit_array", NULL, NULL);
	if (suite == NULL) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (
		CU_add_test(suite, "test_1bit", test_1bit) == NULL ||
		CU_add_test(suite, "test_64bit", test_64bit) == NULL ||
		CU_add_test(suite, "test_find", test_find) == NULL ||
		CU_add_test(suite, "test_resize", test_resize) == NULL ||
		CU_add_test(suite, "test_errors", test_errors) == NULL) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	CU_basic_set_mode(CU_BRM_VERBOSE);

	CU_basic_run_tests();

	num_failures = CU_get_number_of_failures();
	CU_cleanup_registry();

	return num_failures;
}

开发者ID:spdk，项目名称:spdk，代码行数:35，代码来源:bit_array_ut.c

示例2: main

int main(int argc, char **argv)
{

        /* Initialize CUnit. */
        if (CUE_SUCCESS != CU_initialize_registry())
                return CU_get_error();

        /* Here's an example test suite.  First we initialize the suit. */
        {
                CU_pSuite s = CU_add_suite("example test suite",
                                &init_suite_example,
                                &clean_suite_example);

                CU_add_test(s, "test of mm_malloc()", &test_malloc);
                CU_add_test(s, "test #1 of mm_malloc()", &test_malloc_1);
                CU_add_test(s, "test #2 of mm_malloc()", &test_malloc_2);
                CU_add_test(s, "test #3 of mm_malloc()", &test_malloc_3);
                CU_add_test(s, "test #4 of mm_malloc()", &test_malloc_4);
                CU_add_test(s, "test #5 of mm_malloc()", &test_malloc_5);
                CU_add_test(s, "test #6 of mm_malloc()", &test_malloc_6);
                CU_add_test(s, "test #1 of mm_realloc()", &test_realloc_1);
                CU_add_test(s, "test #2 of mm_realloc()", &test_realloc_2);
                CU_add_test(s, "test #3 of mm_realloc()", &test_realloc_3);
                CU_add_test(s, "test #4 of mm_realloc()", &test_realloc_4);
                CU_add_test(s, "test #5 of mm_realloc()", &test_realloc_5);
                CU_add_test(s, "test #1 of mm_free()", &test_free_1);
                CU_add_test(s, "test #2 of mm_free()", &test_free_2);
        }

        /* Actually run your tests here. */
        CU_basic_set_mode(CU_BRM_VERBOSE);
        CU_basic_run_tests();
        CU_cleanup_registry();
        return CU_get_error();
}

开发者ID:coconan，项目名称:cbs-scheduler，代码行数:35，代码来源:test_mm.c

示例3: main

int main()
{
    CU_pSuite pSuite = NULL;

    /* Initialize the CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* Add a suite to the registry */
    pSuite = CU_add_suite("google_oauth2_access_test", init_suite, clean_suite);
    if (NULL == pSuite)
    {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Add the tests to the suite */
    if ((NULL == CU_add_test(pSuite, "testBuildAccessTokenRequestAsHtmlRequest", testBuildAccessTokenRequestAsHtmlRequest)) ||
            (NULL == CU_add_test(pSuite, "testBuildPostFieldsForRefreshingTheAccessToken", testBuildPostFieldsForRefreshingTheAccessToken)) ||
            (NULL == CU_add_test(pSuite, "testBuildPostFieldsForRequestingAnAccessToken", testBuildPostFieldsForRequestingAnAccessToken)) ||
            (NULL == CU_add_test(pSuite, "testMakeHttpsRequestWithResponse", testMakeHttpsRequestWithResponse)) ||
            (NULL == CU_add_test(pSuite, "testProcessIncomingAccessTokenResponse", testProcessIncomingAccessTokenResponse)) ||
            (NULL == CU_add_test(pSuite, "testProcessIncomingRefreshTokenResponse", testProcessIncomingRefreshTokenResponse)) ||
            (NULL == CU_add_test(pSuite, "testcheckIfErrorOccured", testcheckIfErrorOccured)))
    {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Run all tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    CU_cleanup_registry();
    return CU_get_error();
}

开发者ID:EarlOfEgo，项目名称:GoogleTasksClientLibrary，代码行数:35，代码来源:google_oauth2_access_test.c

示例4: main

/* The main() function for setting up and running the tests.
 * Returns a CUE_SUCCESS on successful running, another
 * CUnit error code on failure.
 */
int main()
{
   CU_pSuite pSuite = NULL;

   /* initialize the CUnit test registry */
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

   /* add a suite to the registry */
   pSuite = CU_add_suite("Suite_1", init_suite1, clean_suite1);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* add the tests to the suite */
   /* NOTE - ORDER IS IMPORTANT - MUST TEST fread() AFTER fprintf() */
   if ((NULL == CU_add_test(pSuite, "test of fprintf()", testFPRINTF)) ||
       (NULL == CU_add_test(pSuite, "test of fread()", testFREAD)))
   {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* Run all tests using the CUnit Basic interface */
   CU_basic_set_mode(CU_BRM_VERBOSE);
   CU_basic_run_tests();
   CU_cleanup_registry();
   return CU_get_error();
}

开发者ID:gobbigustavo，项目名称:PaiDePiper，代码行数:34，代码来源:BlackBoxTest.c

示例5: main

int main() {
    
	CU_pSuite pSuite = NULL;

    /* initialize the CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* add a suite to the registry */
    pSuite = CU_add_suite("gcd_suite", NULL, NULL);
    if (NULL == pSuite) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* add the tests to the suite */
    if ((NULL == CU_add_test(pSuite, "test_same_number", test_same_number)) ||
        (NULL == CU_add_test(pSuite, "test_nothing_common", test_nothing_common)) ||
        (NULL == CU_add_test(pSuite, "test_factorize", test_factorize)) ||
        (NULL == CU_add_test(pSuite, "test_gcd_ok", test_gcd_ok)) ||
        (NULL == CU_add_test(pSuite, "test_malloc_fail", test_malloc_fail)) ||
        (NULL == CU_add_test(pSuite, "test_malloc_equals_free", test_malloc_equals_free)) ||
        (NULL == CU_add_test(pSuite, "test_nb_threads", test_nb_threads)))
    {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Run all tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    CU_cleanup_registry();

    return CU_get_error();
}

开发者ID:UCL-INGI，项目名称:SINF1252，代码行数:35，代码来源:tests.c

示例6: main

int main(
        const int argc,
        const char* const * argv)
{
    int exitCode = 1; /* failure */

    if (CUE_SUCCESS == CU_initialize_registry()) {
        CU_Suite* testSuite = CU_add_suite(__FILE__, setup, teardown);

        if (NULL != testSuite) {
            const char* progname = basename((char*)argv[0]);

            CU_ADD_TEST(testSuite, test_create);
            CU_ADD_TEST(testSuite, test_get);
            CU_ADD_TEST(testSuite, test_write_lock);
            CU_ADD_TEST(testSuite, test_read_lock);
            CU_ADD_TEST(testSuite, test_multiple_write);
            CU_ADD_TEST(testSuite, test_multiple_read);

            if (log_init(progname)) {
                (void) fprintf(stderr, "Couldn't open logging system\n");
            }
            else {
                if (CU_basic_run_tests() == CUE_SUCCESS) {
                    if (0 == CU_get_number_of_failures())
                        exitCode = 0; /* success */
                }
            }
        }

        CU_cleanup_registry();
    } /* CUnit registry allocated */

    return exitCode;
}

开发者ID:Unidata，项目名称:LDM，代码行数:35，代码来源:testSemRWLock.c

示例7: main

int main(int argc, char **argv)
{
	CU_pSuite	suite = NULL;
	unsigned int	num_failures;

	if (CU_initialize_registry() != CUE_SUCCESS) {
		return CU_get_error();
	}

	suite = CU_add_suite("nvmf", NULL, NULL);
	if (suite == NULL) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (
		CU_add_test(suite, "create_subsystem", nvmf_test_create_subsystem) == NULL ||
		CU_add_test(suite, "find_subsystem", nvmf_test_find_subsystem) == NULL ||
		CU_add_test(suite, "discovery_log", test_discovery_log) == NULL) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
	num_failures = CU_get_number_of_failures();
	CU_cleanup_registry();
	return num_failures;
}

开发者ID:spdk，项目名称:spdk，代码行数:29，代码来源:subsystem_ut.c

示例8: main

int main()
{
   /* initialize the CUnit test registry */
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

   if (CUE_SUCCESS != create_tlv_suit()) {
       goto exit;
   }
   if (CUE_SUCCESS != create_uri_suit()) {
       goto exit;
   }
   if (CUE_SUCCESS != create_convert_numbers_suit()) {
       goto exit;
   }
   if (CUE_SUCCESS != create_tlv_json_suit()) {
       goto exit;
   }

   CU_basic_set_mode(CU_BRM_VERBOSE);
   CU_basic_run_tests();
exit:
   CU_cleanup_registry();
   return CU_get_error();
}

开发者ID:duanlhjoe，项目名称:wakaama，代码行数:25，代码来源:unittests.c

示例9: main

int main(int argc, char const *argv[]) {
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();
	CU_pSuite pSuite = NULL;
	pSuite = CU_add_suite("Suite de tests : libfractal", setup, teardown);
	if (NULL == pSuite) {
		CU_cleanup_registry();
		return CU_get_error();
	}
	if ((NULL == CU_add_test(pSuite, "Name", test_libfractal_ptr_not_null)) ||
			(NULL == CU_add_test(pSuite, "Name", test_libfractal_ptr_value_not_null)) ||
			(NULL == CU_add_test(pSuite, "Name", test_libfractal_get_name)) ||
			(NULL == CU_add_test(pSuite, "Name", test_libfractal_get_width)) ||
			(NULL == CU_add_test(pSuite, "Name", test_libfractal_get_height)) ||
			(NULL == CU_add_test(pSuite, "Name", test_libfractal_get_a)) ||
			(NULL == CU_add_test(pSuite, "Name", test_libfractal_get_b))||
			(NULL == CU_add_test(pSuite, "Name", test_libfractal_get_set_value))) {
		CU_cleanup_registry();
		return CU_get_error();
	}
	CU_basic_run_tests();
	CU_basic_show_failures(CU_get_failure_list());
	CU_cleanup_registry();
	return 0;
}

开发者ID:pgonzalezalv，项目名称:os_project2，代码行数:25，代码来源:libfractal_test.c

示例10: main

int main(int argc, char const *argv[]) {
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();
	CU_pSuite pSuite = NULL;
	pSuite = CU_add_suite("Suite de tests : malloc", setup, teardown);
	if (NULL == pSuite) {
		CU_cleanup_registry();
		return CU_get_error();
	}
	if ((NULL == CU_add_test(pSuite, "Blocks réallouables", test_free_block_reallouable)) ||
	 		(NULL == CU_add_test(pSuite, "Pointeur non null", test_malloc_pointeur_non_null)) ||
			(NULL == CU_add_test(pSuite, "Deux pointeurs différents", test_malloc_deux_pointeurs_differents)) ||
			(NULL == CU_add_test(pSuite, "Size 0", test_malloc_size_0)) ||
			(NULL == CU_add_test(pSuite, "Pointeur invalide", test_free_malloc)) ||
			(NULL == CU_add_test(pSuite, "Test valeur", test_malloc_ajout)) ||
			(NULL == CU_add_test(pSuite, "Double Free", test_double_free)) ||
			(NULL == CU_add_test(pSuite, "Test Calloc", callocTest))) {
		CU_cleanup_registry();
		return CU_get_error();
	}
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
	CU_basic_show_failures(CU_get_failure_list());
	CU_cleanup_registry();
	return 0;
}

开发者ID:CelineDknp，项目名称:Projet1-C，代码行数:26，代码来源:malloc_test.c

示例11: main

int main(void)
{
	CU_pSuite pSuite = NULL;

	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	pSuite = CU_add_suite("toml suite", init_toml, fini_toml);
	if (NULL == pSuite)
		goto out;

	if ((NULL == CU_add_test(pSuite, "test fruit", testFruit)))
		goto out;

	if ((NULL == CU_add_test(pSuite, "test types", testTypes)))
		goto out;

	if ((NULL == CU_add_test(pSuite, "test hex", testHex)))
		goto out;

	if ((NULL == CU_add_test(pSuite, "test good examples", testGoodExamples)))
		goto out;

	if ((NULL == CU_add_test(pSuite, "test bad examples", testBadExamples)))
		goto out;

	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();

out:
	CU_cleanup_registry();
	exit(CU_get_error());
}

开发者ID:medcat，项目名称:libtoml，代码行数:33，代码来源:test.c

示例12: liblinphone_tester_run_tests

int liblinphone_tester_run_tests(const char *suite_name, const char *test_name) {
	int i;
	int ret;
	/* initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	for (i = 0; i < liblinphone_tester_nb_test_suites(); i++) {
		run_test_suite(test_suite[i]);
	}

	if (suite_name){
		CU_pSuite suite;
		CU_basic_set_mode(CU_BRM_VERBOSE);
		suite=CU_get_suite(suite_name);
		if (!suite) {
			ms_error("Could not find suite '%s'. Available suites are:", suite_name);
			liblinphone_tester_list_suites();
			return -1;
		} else if (test_name) {
			CU_pTest test=CU_get_test_by_name(test_name, suite);
			if (!test) {
				ms_error("Could not find test '%s' in suite '%s'. Available tests are:", test_name, suite_name);
				// do not use suite_name here, since this method is case sentisitive
				liblinphone_tester_list_suite_tests(suite->pName);
				return -2;
			} else {
				CU_ErrorCode err= CU_basic_run_test(suite, test);
				if (err != CUE_SUCCESS) ms_error("CU_basic_run_test error %d", err);
			}
		} else {
			CU_basic_run_suite(suite);
		}
	} else
	{
#if HAVE_CU_CURSES
		if (curses) {
			/* Run tests using the CUnit curses interface */
			CU_curses_run_tests();
		}
		else
#endif
		{
			/* Run all tests using the CUnit Basic interface */
			CU_basic_set_mode(CU_BRM_VERBOSE);
			CU_basic_run_tests();
		}
	}

	ret=CU_get_number_of_tests_failed()!=0;

	/* Redisplay list of failed tests on end */
	if (CU_get_number_of_failure_records()){
		CU_basic_show_failures(CU_get_failure_list());
		printf("\n");
	}

	CU_cleanup_registry();
	return ret;
}

开发者ID:brenttsai1148，项目名称:linphone-android，代码行数:60，代码来源:tester.c

示例13: main

/* The main() function for setting up and running the tests.
 * Returns a CUE_SUCCESS on successful running, another
 * CUnit error code on failure.
 */
int main()
{
   CU_pSuite pSuite = NULL;

   /* initialize the CUnit test registry */
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

   /* add a suite to the registry */
   pSuite = CU_add_suite("Suite_1", init_suite1, clean_suite1);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* add the tests to the suite */
   /* NOTE - ORDER IS IMPORTANT*/
   if ((NULL == CU_add_test(pSuite, "test of test_listdir()", test_listdir)) ||
       (NULL == CU_add_test(pSuite, "test of test_movefile()", test_movefile)) ||
	   (NULL == CU_add_test(pSuite, "test of test_makefolder()", test_makefolder)) ||
	   (NULL == CU_add_test(pSuite, "test of test_checkfordir()", test_checkfordir)) ||
	   (NULL == CU_add_test(pSuite, "test of test_changedirdown()", test_changedirdown)) ||
	   (NULL == CU_add_test(pSuite, "test of test_dirconcat()", test_dirconcat)) ||
	   (NULL == CU_add_test(pSuite, "test of test_getfilename()", test_getfilename)))
   {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* Run all tests using the CUnit Basic interface */
   CU_basic_set_mode(CU_BRM_VERBOSE);
   CU_basic_run_tests();
   CU_cleanup_registry();
   return CU_get_error();
}

开发者ID:maxfalk，项目名称:Ioopm，代码行数:39，代码来源:musiclibdirtest.c

示例14: main

int main() {
    CU_pSuite pSuite = NULL;

    /* Initialize the CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* Add a suite to the registry */
    pSuite = CU_add_suite("dwistring_test", init_suite, clean_suite);
    if (NULL == pSuite) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Add the tests to the suite */
    if ((NULL == CU_add_test(pSuite, "test_concat_null", test_concat_null)) ||
            (NULL == CU_add_test(pSuite, "test_concat_both_null", test_concat_both_null))||
            (NULL == CU_add_test(pSuite, "test_concat_both_null", test_concat_both_null))||
            (NULL == CU_add_test(pSuite, "test_concatall_three_values", test_concatall_three_values))||
            (NULL == CU_add_test(pSuite, "test_contains_char_positive", test_contains_char_positive))||
            (NULL == CU_add_test(pSuite, "test_contains_char_null", test_contains_char_null))||
            (NULL == CU_add_test(pSuite, "test_contains_char_empty", test_contains_char_empty))||
            (NULL == CU_add_test(pSuite, "test_null_string_normal", test_null_string_normal))||
            (NULL == CU_add_test(pSuite, "test_null_string_nullpointer", test_null_string_nullpointer))||
            (NULL == CU_add_test(pSuite, "test_concatall_first_null", test_concatall_first_null))) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Run all tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    CU_cleanup_registry();
    return CU_get_error();
}

开发者ID:DanielWieczorek，项目名称:dwilib，代码行数:35，代码来源:dwistring_test.c

示例15: main

int main()
{
   CU_pSuite pSuite = NULL;

   /* initialize the CUnit test registry */
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

   /* add a suite to the registry */
   pSuite = CU_add_suite("asf suite", NULL, NULL);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* add the tests to the suite */
   if ((NULL == CU_add_test(pSuite, "vector", test_vector)) ||
       (NULL == CU_add_test(pSuite, "strUtil", test_strUtil)) ||
       (NULL == CU_add_test(pSuite, "solve1d", test_solve1d)) ||
       (NULL == CU_add_test(pSuite, "complex", test_complex)))
   {
      CU_cleanup_registry();
      return CU_get_error();
   }

   /* Run all tests using the CUnit Basic interface */
   CU_basic_set_mode(CU_BRM_VERBOSE);
   CU_basic_run_tests();
   int nfail = CU_get_number_of_failures();
   CU_cleanup_registry();
   return nfail>0;
}

开发者ID:asfadmin，项目名称:ASF_MapReady，代码行数:32，代码来源:test_main.t.c

示例16: main

int main(int argc, char **argv)
{
    int status;

    if(CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    if(!(status = setup_object_tests())
        || !(status = setup_list_tests()))
    {
        CU_cleanup_registry();
        return CU_get_error();
    }

    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    printf("\n");
    CU_basic_show_failures(CU_get_failure_list());
    printf("\n\n");

    CU_automated_run_tests();
    CU_list_tests_to_file();

    //CU_console_run_tests();


    CU_cleanup_registry();

    return CU_get_error();
}

开发者ID:dylan-evans，项目名称:objspace，代码行数:30，代码来源:test.c

示例17: main

int
main(int argc, char **argv)
{
  CU_pSuite pSuite = NULL;
  
  /* initialize the CUnit test registry */
  if(CUE_SUCCESS != CU_initialize_registry()){
    return CU_get_error();
  }

  /* add a suite to the registry */
  pSuite = CU_add_suite("AgsRecallIDTest", ags_recall_id_test_init_suite, ags_recall_id_test_clean_suite);
  
  if(pSuite == NULL){
    CU_cleanup_registry();
    
    return CU_get_error();
  }

  /* add the tests to the suite */
  if((CU_add_test(pSuite, "test of AgsRecallID find reycling context", ags_recall_id_test_find_recycling_context) == NULL) ||
     (CU_add_test(pSuite, "test of AgsRecallID find parent reycling context", ags_recall_id_test_find_parent_recycling_context) == NULL)){
    CU_cleanup_registry();
    
    return CU_get_error();
  }
  
  /* Run all tests using the CUnit Basic interface */
  CU_basic_set_mode(CU_BRM_VERBOSE);
  CU_basic_run_tests();
  
  CU_cleanup_registry();
  
  return(CU_get_error());
}

开发者ID:gsequencer，项目名称:gsequencer，代码行数:35，代码来源:ags_recall_id_test.c

示例18: main

int main()
{
	CU_pSuite pSuite = NULL;

	/* initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	/* add a suite to the registry */
	pSuite = CU_add_suite("Suite 1", init_suite1, clean_suite1);
	if (NULL == pSuite) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	/* add the tests to the suite */
	if (
		(NULL == CU_add_test(pSuite, "test chord_reset"         , test_chord_reset))         ||
		(NULL == CU_add_test(pSuite, "test chord_touch_start"   , test_chord_touch_start))   ||
		(NULL == CU_add_test(pSuite, "test chord_touch_end"     , test_chord_touch_end))     ||
		(NULL == CU_add_test(pSuite, "test chord_state_is_empty", test_chord_state_is_empty))||
		(NULL == CU_add_test(pSuite, "test chord_state_bitmap"  , test_chord_state_bitmap))
	){
		CU_cleanup_registry();
		return CU_get_error();
	}

	/* Run all tests using the CUnit Basic interface */
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
	CU_cleanup_registry();
	return CU_get_error();
}

开发者ID:juhakivekas，项目名称:asetniop-for-linux，代码行数:33，代码来源:chord_test.c

示例19: main

int main() {
  int i = 0;
  CU_ErrorCode error;
  
  test_initialize();

  CU_SuiteInfo all_test_suites[TEST_CUITES_COUNT + 1];
  all_test_suites[i++] = fs_test_suite;
  all_test_suites[i++] = mm_test_suite;
  all_test_suites[i++] = glibc_test_suite;
  all_test_suites[i++] = shell_test_suite;
  all_test_suites[i++] = ring_buffer_test_suite;
  all_test_suites[i++] = (CU_SuiteInfo)CU_SUITE_INFO_NULL;

  if (CUE_SUCCESS != CU_initialize_registry())
	return CU_get_error();

  error = CU_register_suites(all_test_suites);

  CU_basic_set_mode(CU_BRM_VERBOSE);
  CU_basic_run_tests();
  CU_cleanup_registry();
  error = CU_get_error();

  test_finalize();

  return error;
}

开发者ID:Markgorden，项目名称:Sparrow，代码行数:28，代码来源:test.c

示例20: main

int main() {
    CU_pSuite pSuite = NULL;

    /* Initialize the CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* Add a suite to the registry */
    pSuite = CU_add_suite("logTest", init_suite, clean_suite);
    if (NULL == pSuite) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Add the tests to the suite */
    if ((NULL == CU_add_test(pSuite, "test2", test2)) ||
            (NULL == CU_add_test(pSuite, "test1", test1))) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Run all tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    CU_cleanup_registry();
    return CU_get_error();
}

开发者ID:jzendle，项目名称:INIT-101-UTIL，代码行数:27，代码来源:logTest.c

注：本文中的CU_basic_run_tests函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CU_basic_set_mode函数代码示例发布时间：2022-05-30

C++ CU_add_test函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19158|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8633|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ CU_basic_run_tests函数代码示例

示例1: main

示例2: main

示例3: main

示例4: main

示例5: main

示例6: main

示例7: main

示例8: main

示例9: main

示例10: main

示例11: main

示例12: liblinphone_tester_run_tests

示例13: main

示例14: main

示例15: main

示例16: main

示例17: main

示例18: main

示例19: main

示例20: main

请发表评论

全部评论

上一篇：

下一篇：

AdamWagner/stackline: Visualize yabai wi

OpenNBS/OpenNoteBlockStudio: An open-sou

TingsongYu/cascaded_mobilenet-v2: cascad

[转载]Delphi版everything、光速搜索代码

JunichiT/JTMaterialSwitch: A Customizabl

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053