• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ CURVNET_SET函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中CURVNET_SET函数的典型用法代码示例。如果您正苦于以下问题:C++ CURVNET_SET函数的具体用法?C++ CURVNET_SET怎么用?C++ CURVNET_SET使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了CURVNET_SET函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ieee80211_notify_country

void
ieee80211_notify_country(struct ieee80211vap *vap,
	const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t cc[2])
{
	struct ifnet *ifp = vap->iv_ifp;
	struct ieee80211_country_event iev;

	memset(&iev, 0, sizeof(iev));
	IEEE80211_ADDR_COPY(iev.iev_addr, bssid);
	iev.iev_cc[0] = cc[0];
	iev.iev_cc[1] = cc[1];
	CURVNET_SET(ifp->if_vnet);
	rt_ieee80211msg(ifp, RTM_IEEE80211_COUNTRY, &iev, sizeof(iev));
	CURVNET_RESTORE();
}
开发者ID:Alkzndr,项目名称:freebsd,代码行数:15,代码来源:ieee80211_freebsd.c


示例2: ieee80211_notify_radar

void
ieee80211_notify_radar(struct ieee80211com *ic,
	const struct ieee80211_channel *c)
{
	struct ifnet *ifp = ic->ic_ifp;
	struct ieee80211_radar_event iev;

	memset(&iev, 0, sizeof(iev));
	iev.iev_flags = c->ic_flags;
	iev.iev_freq = c->ic_freq;
	iev.iev_ieee = c->ic_ieee;
	CURVNET_SET(ifp->if_vnet);
	rt_ieee80211msg(ifp, RTM_IEEE80211_RADAR, &iev, sizeof(iev));
	CURVNET_RESTORE();
}
开发者ID:Alkzndr,项目名称:freebsd,代码行数:15,代码来源:ieee80211_freebsd.c


示例3: tcp_slowtimo

/*
 * Tcp protocol timeout routine called every 500 ms.
 * Updates timestamps used for TCP
 * causes finite state machine actions if timers expire.
 */
void
tcp_slowtimo(void)
{
	VNET_ITERATOR_DECL(vnet_iter);

	VNET_LIST_RLOCK_NOSLEEP();
	VNET_FOREACH(vnet_iter) {
		CURVNET_SET(vnet_iter);
		INP_INFO_WLOCK(&V_tcbinfo);
		(void) tcp_tw_2msl_scan(0);
		INP_INFO_WUNLOCK(&V_tcbinfo);
		CURVNET_RESTORE();
	}
	VNET_LIST_RUNLOCK_NOSLEEP();
}
开发者ID:carriercomm,项目名称:libuinet,代码行数:20,代码来源:tcp_timer.c


示例4: ieee80211_notify_cac

void
ieee80211_notify_cac(struct ieee80211com *ic,
	const struct ieee80211_channel *c, enum ieee80211_notify_cac_event type)
{
	struct ifnet *ifp = ic->ic_ifp;
	struct ieee80211_cac_event iev;

	memset(&iev, 0, sizeof(iev));
	iev.iev_flags = c->ic_flags;
	iev.iev_freq = c->ic_freq;
	iev.iev_ieee = c->ic_ieee;
	iev.iev_type = type;
	CURVNET_SET(ifp->if_vnet);
	rt_ieee80211msg(ifp, RTM_IEEE80211_CAC, &iev, sizeof(iev));
	CURVNET_RESTORE();
}
开发者ID:Alkzndr,项目名称:freebsd,代码行数:16,代码来源:ieee80211_freebsd.c


示例5: ieee80211_notify_csa

void
ieee80211_notify_csa(struct ieee80211com *ic,
	const struct ieee80211_channel *c, int mode, int count)
{
	struct ifnet *ifp = ic->ic_ifp;
	struct ieee80211_csa_event iev;

	memset(&iev, 0, sizeof(iev));
	iev.iev_flags = c->ic_flags;
	iev.iev_freq = c->ic_freq;
	iev.iev_ieee = c->ic_ieee;
	iev.iev_mode = mode;
	iev.iev_count = count;
	CURVNET_SET(ifp->if_vnet);
	rt_ieee80211msg(ifp, RTM_IEEE80211_CSA, &iev, sizeof(iev));
	CURVNET_RESTORE();
}
开发者ID:Alkzndr,项目名称:freebsd,代码行数:17,代码来源:ieee80211_freebsd.c


示例6: in_rtqtimo

static void
in_rtqtimo(void *rock)
{
	CURVNET_SET((struct vnet *) rock);
	int fibnum;
	void *newrock;
	struct timeval atv;

	for (fibnum = 0; fibnum < rt_numfibs; fibnum++) {
		newrock = rt_tables_get_rnh(fibnum, AF_INET);
		if (newrock != NULL)
			in_rtqtimo_one(newrock);
	}
	atv.tv_usec = 0;
	atv.tv_sec = V_rtq_timeout;
	callout_reset(&V_rtq_timer, tvtohz(&atv), in_rtqtimo, rock);
	CURVNET_RESTORE();
}
开发者ID:dcui,项目名称:FreeBSD-9.3_kernel,代码行数:18,代码来源:in_rmx.c


示例7: ipfpoll

ipfpoll(dev_t dev, int events, struct proc *td)
#endif
{
	int unit = GET_MINOR(dev);
	int revents;

	if (unit < 0 || unit > IPL_LOGMAX)
		return 0;

	revents = 0;

	CURVNET_SET(TD_TO_VNET(td));
	switch (unit)
	{
	case IPL_LOGIPF :
	case IPL_LOGNAT :
	case IPL_LOGSTATE :
#ifdef IPFILTER_LOG
		if ((events & (POLLIN | POLLRDNORM)) && ipf_log_canread(&V_ipfmain, unit))
			revents |= events & (POLLIN | POLLRDNORM);
#endif
		break;
	case IPL_LOGAUTH :
		if ((events & (POLLIN | POLLRDNORM)) && ipf_auth_waiting(&V_ipfmain))
			revents |= events & (POLLIN | POLLRDNORM);
		break;
	case IPL_LOGSYNC :
		if ((events & (POLLIN | POLLRDNORM)) && ipf_sync_canread(&V_ipfmain))
			revents |= events & (POLLIN | POLLRDNORM);
		if ((events & (POLLOUT | POLLWRNORM)) && ipf_sync_canwrite(&V_ipfmain))
			revents |= events & (POLLOUT | POLLWRNORM);
		break;
	case IPL_LOGSCAN :
	case IPL_LOGLOOKUP :
	default :
		break;
	}

	if ((revents == 0) && ((events & (POLLIN|POLLRDNORM)) != 0))
		selrecord(td, &V_ipfmain.ipf_selwait[unit]);
	CURVNET_RESTORE();

	return revents;
}
开发者ID:2asoft,项目名称:freebsd,代码行数:44,代码来源:mlfk_ipl.c


示例8: ieee80211_ifdetach

/*
 * Detach net80211 state on device detach.  Tear down
 * all vap's and reclaim all common state prior to the
 * device state going away.  Note we may call back into
 * driver; it must be prepared for this.
 */
void
ieee80211_ifdetach(struct ieee80211com *ic)
{
	struct ifnet *ifp = ic->ic_ifp;
	struct ieee80211vap *vap;

	/*
	 * This detaches the main interface, but not the vaps.
	 * Each VAP may be in a separate VIMAGE.
	 */
	CURVNET_SET(ifp->if_vnet);
	if_detach(ifp);
	CURVNET_RESTORE();

	/*
	 * The VAP is responsible for setting and clearing
	 * the VIMAGE context.
	 */
	while ((vap = TAILQ_FIRST(&ic->ic_vaps)) != NULL)
		ieee80211_vap_destroy(vap);
	ieee80211_waitfor_parent(ic);

	ieee80211_sysctl_detach(ic);
	ieee80211_dfs_detach(ic);
	ieee80211_regdomain_detach(ic);
	ieee80211_scan_detach(ic);
#ifdef IEEE80211_SUPPORT_SUPERG
	ieee80211_superg_detach(ic);
#endif
	ieee80211_ht_detach(ic);
	/* NB: must be called before ieee80211_node_detach */
	ieee80211_proto_detach(ic);
	ieee80211_crypto_detach(ic);
	ieee80211_power_detach(ic);
	ieee80211_node_detach(ic);

	/* XXX VNET needed? */
	ifmedia_removeall(&ic->ic_media);

	taskqueue_free(ic->ic_tq);
	IEEE80211_TX_LOCK_DESTROY(ic);
	IEEE80211_LOCK_DESTROY(ic);
}
开发者ID:rchander,项目名称:freebsd,代码行数:49,代码来源:ieee80211.c


示例9: act_open_failure_cleanup

void
act_open_failure_cleanup(struct adapter *sc, u_int atid, u_int status)
{
	struct toepcb *toep = lookup_atid(sc, atid);
	struct inpcb *inp = toep->inp;
	struct toedev *tod = &toep->td->tod;

	free_atid(sc, atid);
	toep->tid = -1;

	CURVNET_SET(toep->vnet);
	if (status != EAGAIN)
		INP_INFO_RLOCK(&V_tcbinfo);
	INP_WLOCK(inp);
	toe_connect_failed(tod, inp, status);
	final_cpl_received(toep);	/* unlocks inp */
	if (status != EAGAIN)
		INP_INFO_RUNLOCK(&V_tcbinfo);
	CURVNET_RESTORE();
}
开发者ID:mulichao,项目名称:freebsd,代码行数:20,代码来源:t4_connect.c


示例10: do_act_establish

/*
 * Active open succeeded.
 */
static int
do_act_establish(struct sge_iq *iq, const struct rss_header *rss,
    struct mbuf *m)
{
	struct adapter *sc = iq->adapter;
	const struct cpl_act_establish *cpl = (const void *)(rss + 1);
	u_int tid = GET_TID(cpl);
	u_int atid = G_TID_TID(ntohl(cpl->tos_atid));
	struct toepcb *toep = lookup_atid(sc, atid);
	struct inpcb *inp = toep->inp;

	KASSERT(m == NULL, ("%s: wasn't expecting payload", __func__));
	KASSERT(toep->tid == atid, ("%s: toep tid/atid mismatch", __func__));

	CTR3(KTR_CXGBE, "%s: atid %u, tid %u", __func__, atid, tid);
	free_atid(sc, atid);

	CURVNET_SET(toep->vnet);
	INP_WLOCK(inp);
	toep->tid = tid;
	insert_tid(sc, tid, toep, inp->inp_vflag & INP_IPV6 ? 2 : 1);
	if (inp->inp_flags & INP_DROPPED) {

		/* socket closed by the kernel before hw told us it connected */

		send_flowc_wr(toep, NULL);
		send_reset(sc, toep, be32toh(cpl->snd_isn));
		goto done;
	}

	make_established(toep, be32toh(cpl->snd_isn) - 1,
	    be32toh(cpl->rcv_isn) - 1, cpl->tcp_opt);

	if (toep->ulp_mode == ULP_MODE_TLS)
		tls_establish(toep);

done:
	INP_WUNLOCK(inp);
	CURVNET_RESTORE();
	return (0);
}
开发者ID:FreeBSDFoundation,项目名称:freebsd,代码行数:44,代码来源:t4_connect.c


示例11: tcp_timer_delack

void
tcp_timer_delack(void *xtp)
{
	struct tcpcb *tp = xtp;
	struct inpcb *inp;
	CURVNET_SET(tp->t_vnet);

	inp = tp->t_inpcb;
	/*
	 * XXXRW: While this assert is in fact correct, bugs in the tcpcb
	 * tear-down mean we need it as a work-around for races between
	 * timers and tcp_discardcb().
	 *
	 * KASSERT(inp != NULL, ("tcp_timer_delack: inp == NULL"));
	 */
	if (inp == NULL) {
		tcp_timer_race++;
		CURVNET_RESTORE();
		return;
	}
	INP_WLOCK(inp);
	if (callout_pending(&tp->t_timers->tt_delack) ||
	    !callout_active(&tp->t_timers->tt_delack)) {
		INP_WUNLOCK(inp);
		CURVNET_RESTORE();
		return;
	}
	callout_deactivate(&tp->t_timers->tt_delack);
	if ((inp->inp_flags & INP_DROPPED) != 0) {
		INP_WUNLOCK(inp);
		CURVNET_RESTORE();
		return;
	}

	tp->t_flags |= TF_ACKNOW;
	TCPSTAT_INC(tcps_delack);
	(void) tcp_output(tp);
	INP_WUNLOCK(inp);
	CURVNET_RESTORE();
}
开发者ID:Alkzndr,项目名称:freebsd,代码行数:40,代码来源:tcp_timer.c


示例12: ieee80211_notify_michael_failure

void
ieee80211_notify_michael_failure(struct ieee80211vap *vap,
	const struct ieee80211_frame *wh, u_int keyix)
{
	struct ifnet *ifp = vap->iv_ifp;

	IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, wh->i_addr2,
	    "michael MIC verification failed <keyix %u>", keyix);
	vap->iv_stats.is_rx_tkipmic++;

	if (ifp != NULL) {		/* NB: for cipher test modules */
		struct ieee80211_michael_event iev;

		IEEE80211_ADDR_COPY(iev.iev_dst, wh->i_addr1);
		IEEE80211_ADDR_COPY(iev.iev_src, wh->i_addr2);
		iev.iev_cipher = IEEE80211_CIPHER_TKIP;
		iev.iev_keyix = keyix;
		CURVNET_SET(ifp->if_vnet);
		rt_ieee80211msg(ifp, RTM_IEEE80211_MICHAEL, &iev, sizeof(iev));
		CURVNET_RESTORE();
	}
}
开发者ID:Alkzndr,项目名称:freebsd,代码行数:22,代码来源:ieee80211_freebsd.c


示例13: soo_ioctl

static int
soo_ioctl(struct file *fp, u_long cmd, void *data, struct ucred *active_cred,
    struct thread *td)
{
	struct socket *so = fp->f_data;
	int error = 0;

	switch (cmd) {
	case FIONBIO:
		SOCK_LOCK(so);
		if (*(int *)data)
			so->so_state |= SS_NBIO;
		else
			so->so_state &= ~SS_NBIO;
		SOCK_UNLOCK(so);
		break;

	case FIOASYNC:
		/*
		 * XXXRW: This code separately acquires SOCK_LOCK(so) and
		 * SOCKBUF_LOCK(&so->so_rcv) even though they are the same
		 * mutex to avoid introducing the assumption that they are
		 * the same.
		 */
		if (*(int *)data) {
			SOCK_LOCK(so);
			so->so_state |= SS_ASYNC;
			SOCK_UNLOCK(so);
			SOCKBUF_LOCK(&so->so_rcv);
			so->so_rcv.sb_flags |= SB_ASYNC;
			SOCKBUF_UNLOCK(&so->so_rcv);
			SOCKBUF_LOCK(&so->so_snd);
			so->so_snd.sb_flags |= SB_ASYNC;
			SOCKBUF_UNLOCK(&so->so_snd);
		} else {
			SOCK_LOCK(so);
			so->so_state &= ~SS_ASYNC;
			SOCK_UNLOCK(so);
			SOCKBUF_LOCK(&so->so_rcv);
			so->so_rcv.sb_flags &= ~SB_ASYNC;
			SOCKBUF_UNLOCK(&so->so_rcv);
			SOCKBUF_LOCK(&so->so_snd);
			so->so_snd.sb_flags &= ~SB_ASYNC;
			SOCKBUF_UNLOCK(&so->so_snd);
		}
		break;

	case FIONREAD:
		/* Unlocked read. */
		*(int *)data = sbavail(&so->so_rcv);
		break;

	case FIONWRITE:
		/* Unlocked read. */
		*(int *)data = sbavail(&so->so_snd);
		break;

	case FIONSPACE:
		/* Unlocked read. */
		if ((so->so_snd.sb_hiwat < sbused(&so->so_snd)) ||
		    (so->so_snd.sb_mbmax < so->so_snd.sb_mbcnt))
			*(int *)data = 0;
		else
			*(int *)data = sbspace(&so->so_snd);
		break;

	case FIOSETOWN:
		error = fsetown(*(int *)data, &so->so_sigio);
		break;

	case FIOGETOWN:
		*(int *)data = fgetown(&so->so_sigio);
		break;

	case SIOCSPGRP:
		error = fsetown(-(*(int *)data), &so->so_sigio);
		break;

	case SIOCGPGRP:
		*(int *)data = -fgetown(&so->so_sigio);
		break;

	case SIOCATMARK:
		/* Unlocked read. */
		*(int *)data = (so->so_rcv.sb_state & SBS_RCVATMARK) != 0;
		break;
	default:
		/*
		 * Interface/routing/protocol specific ioctls: interface and
		 * routing ioctls should have a different entry since a
		 * socket is unnecessary.
		 */
		if (IOCGROUP(cmd) == 'i')
			error = ifioctl(so, cmd, data, td);
		else if (IOCGROUP(cmd) == 'r') {
			CURVNET_SET(so->so_vnet);
			error = rtioctl_fib(cmd, data, so->so_fibnum);
			CURVNET_RESTORE();
		} else {
			CURVNET_SET(so->so_vnet);
//.........这里部分代码省略.........
开发者ID:Digital-Chaos,项目名称:freebsd,代码行数:101,代码来源:sys_socket.c


示例14: tcp_timer_2msl

void
tcp_timer_2msl(void *xtp)
{
	struct tcpcb *tp = xtp;
	struct inpcb *inp;
	CURVNET_SET(tp->t_vnet);
#ifdef TCPDEBUG
	int ostate;

	ostate = tp->t_state;
#endif
	/*
	 * XXXRW: Does this actually happen?
	 */
	INP_INFO_WLOCK(&V_tcbinfo);
	inp = tp->t_inpcb;
	/*
	 * XXXRW: While this assert is in fact correct, bugs in the tcpcb
	 * tear-down mean we need it as a work-around for races between
	 * timers and tcp_discardcb().
	 *
	 * KASSERT(inp != NULL, ("tcp_timer_2msl: inp == NULL"));
	 */
	if (inp == NULL) {
		tcp_timer_race++;
		INP_INFO_WUNLOCK(&V_tcbinfo);
		CURVNET_RESTORE();
		return;
	}
	INP_WLOCK(inp);
	tcp_free_sackholes(tp);
	if ((inp->inp_flags & INP_DROPPED) || callout_pending(&tp->t_timers->tt_2msl) ||
	    !callout_active(&tp->t_timers->tt_2msl)) {
		INP_WUNLOCK(tp->t_inpcb);
		INP_INFO_WUNLOCK(&V_tcbinfo);
		CURVNET_RESTORE();
		return;
	}
	callout_deactivate(&tp->t_timers->tt_2msl);
	/*
	 * 2 MSL timeout in shutdown went off.  If we're closed but
	 * still waiting for peer to close and connection has been idle
	 * too long, or if 2MSL time is up from TIME_WAIT, delete connection
	 * control block.  Otherwise, check again in a bit.
	 *
	 * If fastrecycle of FIN_WAIT_2, in FIN_WAIT_2 and receiver has closed, 
	 * there's no point in hanging onto FIN_WAIT_2 socket. Just close it. 
	 * Ignore fact that there were recent incoming segments.
	 */
	if (tcp_fast_finwait2_recycle && tp->t_state == TCPS_FIN_WAIT_2 &&
	    tp->t_inpcb && tp->t_inpcb->inp_socket && 
	    (tp->t_inpcb->inp_socket->so_rcv.sb_state & SBS_CANTRCVMORE)) {
		TCPSTAT_INC(tcps_finwait2_drops);
		tp = tcp_close(tp);             
	} else {
		if (tp->t_state != TCPS_TIME_WAIT &&
		   ticks - tp->t_rcvtime <= TP_MAXIDLE(tp))
		       callout_reset_on(&tp->t_timers->tt_2msl,
			   TP_KEEPINTVL(tp), tcp_timer_2msl, tp, INP_CPU(inp));
	       else
		       tp = tcp_close(tp);
       }

#ifdef TCPDEBUG
	if (tp != NULL && (tp->t_inpcb->inp_socket->so_options & SO_DEBUG))
		tcp_trace(TA_USER, ostate, tp, (void *)0, (struct tcphdr *)0,
			  PRU_SLOWTIMO);
#endif
	if (tp != NULL)
		INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&V_tcbinfo);
	CURVNET_RESTORE();
}
开发者ID:carriercomm,项目名称:libuinet,代码行数:73,代码来源:tcp_timer.c


示例15: nfs_mountroot


//.........这里部分代码省略.........

	/*
	 * XXX splnet, so networks will receive...
	 */
	splnet();

	/*
	 * Do enough of ifconfig(8) so that the critical net interface can
	 * talk to the server.
	 */
	error = socreate(nd->myif.ifra_addr.sa_family, &so, nd->root_args.sotype, 0,
	    td->td_ucred, td);
	if (error)
		panic("nfs_mountroot: socreate(%04x): %d",
			nd->myif.ifra_addr.sa_family, error);

#if 0 /* XXX Bad idea */
	/*
	 * We might not have been told the right interface, so we pass
	 * over the first ten interfaces of the same kind, until we get
	 * one of them configured.
	 */

	for (i = strlen(nd->myif.ifra_name) - 1;
		nd->myif.ifra_name[i] >= '0' &&
		nd->myif.ifra_name[i] <= '9';
		nd->myif.ifra_name[i] ++) {
		error = ifioctl(so, SIOCAIFADDR, (caddr_t)&nd->myif, td);
		if(!error)
			break;
	}
#endif

	error = ifioctl(so, SIOCAIFADDR, (caddr_t)&nd->myif, td);
	if (error)
		panic("nfs_mountroot: SIOCAIFADDR: %d", error);

	if ((cp = getenv("boot.netif.mtu")) != NULL) {
		ir.ifr_mtu = strtol(cp, NULL, 10);
		bcopy(nd->myif.ifra_name, ir.ifr_name, IFNAMSIZ);
		freeenv(cp);
		error = ifioctl(so, SIOCSIFMTU, (caddr_t)&ir, td);
		if (error)
			printf("nfs_mountroot: SIOCSIFMTU: %d", error);
	}
	soclose(so);

	/*
	 * If the gateway field is filled in, set it as the default route.
	 * Note that pxeboot will set a default route of 0 if the route
	 * is not set by the DHCP server.  Check also for a value of 0
	 * to avoid panicking inappropriately in that situation.
	 */
	if (nd->mygateway.sin_len != 0 &&
	    nd->mygateway.sin_addr.s_addr != 0) {
		struct sockaddr_in mask, sin;

		bzero((caddr_t)&mask, sizeof(mask));
		sin = mask;
		sin.sin_family = AF_INET;
		sin.sin_len = sizeof(sin);
                /* XXX MRT use table 0 for this sort of thing */
		CURVNET_SET(TD_TO_VNET(td));
		error = rtrequest_fib(RTM_ADD, (struct sockaddr *)&sin,
		    (struct sockaddr *)&nd->mygateway,
		    (struct sockaddr *)&mask,
		    RTF_UP | RTF_GATEWAY, NULL, RT_DEFAULT_FIB);
		CURVNET_RESTORE();
		if (error)
			panic("nfs_mountroot: RTM_ADD: %d", error);
	}

	/*
	 * Create the rootfs mount point.
	 */
	nd->root_args.fh = nd->root_fh;
	nd->root_args.fhsize = nd->root_fhsize;
	l = ntohl(nd->root_saddr.sin_addr.s_addr);
	snprintf(buf, sizeof(buf), "%ld.%ld.%ld.%ld:%s",
		(l >> 24) & 0xff, (l >> 16) & 0xff,
		(l >>  8) & 0xff, (l >>  0) & 0xff, nd->root_hostnam);
	printf("NFS ROOT: %s\n", buf);
	nd->root_args.hostname = buf;
	if ((error = nfs_mountdiskless(buf,
	    &nd->root_saddr, &nd->root_args, td, &vp, mp)) != 0) {
		return (error);
	}

	/*
	 * This is not really an nfs issue, but it is much easier to
	 * set hostname here and then let the "/etc/rc.xxx" files
	 * mount the right /var based upon its preset value.
	 */
	mtx_lock(&prison0.pr_mtx);
	strlcpy(prison0.pr_hostname, nd->my_hostnam,
	    sizeof (prison0.pr_hostname));
	mtx_unlock(&prison0.pr_mtx);
	inittodr(ntohl(nd->root_time));
	return (0);
}
开发者ID:vkhromov,项目名称:freebsd,代码行数:101,代码来源:nfs_vfsops.c


示例16: ieee80211_vap_detach

/* 
 * Tear down vap state and reclaim the ifnet.
 * The driver is assumed to have prepared for
 * this; e.g. by turning off interrupts for the
 * underlying device.
 */
void
ieee80211_vap_detach(struct ieee80211vap *vap)
{
	struct ieee80211com *ic = vap->iv_ic;
	struct ifnet *ifp = vap->iv_ifp;

	CURVNET_SET(ifp->if_vnet);

	IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s parent %s\n",
	    __func__, ieee80211_opmode_name[vap->iv_opmode],
	    ic->ic_ifp->if_xname);

	/* NB: bpfdetach is called by ether_ifdetach and claims all taps */
	ether_ifdetach(ifp);

	ieee80211_stop(vap);

	/*
	 * Flush any deferred vap tasks.
	 */
	ieee80211_draintask(ic, &vap->iv_nstate_task);
	ieee80211_draintask(ic, &vap->iv_swbmiss_task);

	/* XXX band-aid until ifnet handles this for us */
	taskqueue_drain(taskqueue_swi, &ifp->if_linktask);

	IEEE80211_LOCK(ic);
	KASSERT(vap->iv_state == IEEE80211_S_INIT , ("vap still running"));
	TAILQ_REMOVE(&ic->ic_vaps, vap, iv_next);
	ieee80211_syncflag_locked(ic, IEEE80211_F_WME);
#ifdef IEEE80211_SUPPORT_SUPERG
	ieee80211_syncflag_locked(ic, IEEE80211_F_TURBOP);
#endif
	ieee80211_syncflag_locked(ic, IEEE80211_F_PCF);
	ieee80211_syncflag_locked(ic, IEEE80211_F_BURST);
	ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_HT);
	ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_USEHT40);
	/* NB: this handles the bpfdetach done below */
	ieee80211_syncflag_ext_locked(ic, IEEE80211_FEXT_BPF);
	ieee80211_syncifflag_locked(ic, IFF_PROMISC);
	ieee80211_syncifflag_locked(ic, IFF_ALLMULTI);
	IEEE80211_UNLOCK(ic);

	ifmedia_removeall(&vap->iv_media);

	ieee80211_radiotap_vdetach(vap);
	ieee80211_regdomain_vdetach(vap);
	ieee80211_scan_vdetach(vap);
#ifdef IEEE80211_SUPPORT_SUPERG
	ieee80211_superg_vdetach(vap);
#endif
	ieee80211_ht_vdetach(vap);
	/* NB: must be before ieee80211_node_vdetach */
	ieee80211_proto_vdetach(vap);
	ieee80211_crypto_vdetach(vap);
	ieee80211_power_vdetach(vap);
	ieee80211_node_vdetach(vap);
	ieee80211_sysctl_vdetach(vap);

	if_free(ifp);

	CURVNET_RESTORE();
}
开发者ID:rchander,项目名称:freebsd,代码行数:69,代码来源:ieee80211.c


示例17: dummynet_task

/*
 * The timer handler for dummynet. Time is computed in ticks, but
 * but the code is tolerant to the actual rate at which this is called.
 * Once complete, the function reschedules itself for the next tick.
 */
void
dummynet_task(void *context, int pending)
{
	struct timeval t;
	struct mq q = { NULL, NULL }; /* queue to accumulate results */

	CURVNET_SET((struct vnet *)context);

	DN_BH_WLOCK();

	/* Update number of lost(coalesced) ticks. */
	tick_lost += pending - 1;

	getmicrouptime(&t);
	/* Last tick duration (usec). */
	tick_last = (t.tv_sec - dn_cfg.prev_t.tv_sec) * 1000000 +
	(t.tv_usec - dn_cfg.prev_t.tv_usec);
	/* Last tick vs standard tick difference (usec). */
	tick_delta = (tick_last * hz - 1000000) / hz;
	/* Accumulated tick difference (usec). */
	tick_delta_sum += tick_delta;

	dn_cfg.prev_t = t;

	/*
	* Adjust curr_time if the accumulated tick difference is
	* greater than the 'standard' tick. Since curr_time should
	* be monotonically increasing, we do positive adjustments
	* as required, and throttle curr_time in case of negative
	* adjustment.
	*/
	dn_cfg.curr_time++;
	if (tick_delta_sum - tick >= 0) {
		int diff = tick_delta_sum / tick;

		dn_cfg.curr_time += diff;
		tick_diff += diff;
		tick_delta_sum %= tick;
		tick_adjustment++;
	} else if (tick_delta_sum + tick <= 0) {
		dn_cfg.curr_time--;
		tick_diff--;
		tick_delta_sum += tick;
		tick_adjustment++;
	}

	/* serve pending events, accumulate in q */
	for (;;) {
		struct dn_id *p;    /* generic parameter to handler */

		if (dn_cfg.evheap.elements == 0 ||
		    DN_KEY_LT(dn_cfg.curr_time, HEAP_TOP(&dn_cfg.evheap)->key))
			break;
		p = HEAP_TOP(&dn_cfg.evheap)->object;
		heap_extract(&dn_cfg.evheap, NULL);

		if (p->type == DN_SCH_I) {
			serve_sched(&q, (struct dn_sch_inst *)p, dn_cfg.curr_time);
		} else { /* extracted a delay line */
			transmit_event(&q, (struct delay_line *)p, dn_cfg.curr_time);
		}
	}
	if (dn_cfg.expire && ++dn_cfg.expire_cycle >= dn_cfg.expire) {
		dn_cfg.expire_cycle = 0;
		dn_drain_scheduler();
		dn_drain_queue();
	}

	DN_BH_WUNLOCK();
	dn_reschedule();
	if (q.head != NULL)
		dummynet_send(q.head);
	CURVNET_RESTORE();
}
开发者ID:1991kv,项目名称:netmap-ipfw,代码行数:79,代码来源:ip_dn_io.c


示例18: ieee80211_ifattach

/*
 * Attach/setup the common net80211 state.  Called by
 * the driver on attach to prior to creating any vap's.
 */
void
ieee80211_ifattach(struct ieee80211com *ic,
	const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
	struct ifnet *ifp = ic->ic_ifp;
	struct sockaddr_dl *sdl;
	struct ifaddr *ifa;

	KASSERT(ifp->if_type == IFT_IEEE80211, ("if_type %d", ifp->if_type));

	IEEE80211_LOCK_INIT(ic, ifp->if_xname);
	IEEE80211_TX_LOCK_INIT(ic, ifp->if_xname);
	TAILQ_INIT(&ic->ic_vaps);

	/* Create a taskqueue for all state changes */
	ic->ic_tq = taskqueue_create("ic_taskq", M_WAITOK | M_ZERO,
	    taskqueue_thread_enqueue, &ic->ic_tq);
	taskqueue_start_threads(&ic->ic_tq, 1, PI_NET, "%s net80211 taskq",
	    ifp->if_xname);
	/*
	 * Fill in 802.11 available channel set, mark all
	 * available channels as active, and pick a default
	 * channel if not already specified.
	 */
	ieee80211_media_init(ic);

	ic->ic_update_mcast = null_update_mcast;
	ic->ic_update_promisc = null_update_promisc;
	ic->ic_update_chw = null_update_chw;

	ic->ic_hash_key = arc4random();
	ic->ic_bintval = IEEE80211_BINTVAL_DEFAULT;
	ic->ic_lintval = ic->ic_bintval;
	ic->ic_txpowlimit = IEEE80211_TXPOWER_MAX;

	ieee80211_crypto_attach(ic);
	ieee80211_node_attach(ic);
	ieee80211_power_attach(ic);
	ieee80211_proto_attach(ic);
#ifdef IEEE80211_SUPPORT_SUPERG
	ieee80211_superg_attach(ic);
#endif
	ieee80211_ht_attach(ic);
	ieee80211_scan_attach(ic);
	ieee80211_regdomain_attach(ic);
	ieee80211_dfs_attach(ic);

	ieee80211_sysctl_attach(ic);

	ifp->if_addrlen = IEEE80211_ADDR_LEN;
	ifp->if_hdrlen = 0;

	CURVNET_SET(vnet0);

	if_attach(ifp);

	ifp->if_mtu = IEEE80211_MTU_MAX;
	ifp->if_broadcastaddr = ieee80211broadcastaddr;
	ifp->if_output = null_output;
	ifp->if_input = null_input;	/* just in case */
	ifp->if_resolvemulti = NULL;	/* NB: callers check */

	ifa = ifaddr_byindex(ifp->if_index);
	KASSERT(ifa != NULL, ("%s: no lladdr!\n", __func__));
	sdl = (struct sockaddr_dl *)ifa->ifa_addr;
	sdl->sdl_type = IFT_ETHER;		/* XXX IFT_IEEE80211? */
	sdl->sdl_alen = IEEE80211_ADDR_LEN;
	IEEE80211_ADDR_COPY(LLADDR(sdl), macaddr);
	ifa_free(ifa);

	CURVNET_RESTORE();
}
开发者ID:rchander,项目名称:freebsd,代码行数:76,代码来源:ieee80211.c


示例19: tcp_timer_persist

void
tcp_timer_persist(void *xtp)
{
	struct tcpcb *tp = xtp;
	struct inpcb *inp;
	CURVNET_SET(tp->t_vnet);
#ifdef TCPDEBUG
	int ostate;

	ostate = tp->t_state;
#endif
	inp = tp->t_inpcb;
	KASSERT(inp != NULL, ("%s: tp %p tp->t_inpcb == NULL", __func__, tp));
	INP_WLOCK(inp);
	if (callout_pending(&tp->t_timers->tt_persist) ||
	    !callout_active(&tp->t_timers->tt_persist)) {
		INP_WUNLOCK(inp);
		CURVNET_RESTORE();
		return;
	}
	callout_deactivate(&tp->t_timers->tt_persist);
	if ((inp->inp_flags & INP_DROPPED) != 0) {
		INP_WUNLOCK(inp);
		CURVNET_RESTORE();
		return;
	}
	KASSERT((tp->t_timers->tt_flags & TT_STOPPED) == 0,
		("%s: tp %p tcpcb can't be stopped here", __func__, tp));
	/*
	 * Persistence timer into zero window.
	 * Force a byte to be output, if possible.
	 */
	TCPSTAT_INC(tcps_persisttimeo);
	/*
	 * Hack: if the peer is dead/unreachable, we do not
	 * time out if the window is closed.  After a full
	 * backoff, drop the connection if the idle time
	 * (no responses to probes) reaches the maximum
	 * backoff that we would use if retransmitting.
	 */
	if (tp->t_rxtshift == TCP_MAXRXTSHIFT &&
	    (ticks - tp->t_rcvtime >= tcp_maxpersistidle ||
	     ticks - tp->t_rcvtime >= TCP_REXMTVAL(tp) * tcp_totbackoff)) {
		TCPSTAT_INC(tcps_persistdrop);
		if (tcp_inpinfo_lock_add(inp)) {
			tcp_inpinfo_lock_del(inp, tp);
			goto out;
		}
		tp = tcp_drop(tp, ETIMEDOUT);
		tcp_inpinfo_lock_del(inp, tp);
		goto out;
	}
	/*
	 * If the user has closed the socket then drop a persisting
	 * connection after a much reduced timeout.
	 */
	if (tp->t_state > TCPS_CLOSE_WAIT &&
	    (ticks - tp->t_rcvtime) >= TCPTV_PERSMAX) {
		TCPSTAT_INC(tcps_persistdrop);
		if (tcp_inpinfo_lock_add(inp)) {
			tcp_inpinfo_lock_del(inp, tp);
			goto out;
		}
		tp = tcp_drop(tp, ETIMEDOUT);
		tcp_inpinfo_lock_del(inp, tp);
		goto out;
	}
	tcp_setpersist(tp);
	tp->t_flags |= TF_FORCEDATA;
	(void) tp->t_fb->tfb_tcp_output(tp);
	tp->t_flags &= ~TF_FORCEDATA;

#ifdef TCPDEBUG
	if (tp != NULL && tp->t_inpcb->inp_socket->so_options & SO_DEBUG)
		tcp_trace(TA_USER, ostate, tp, NULL, NULL, PRU_SLOWTIMO);
#endif
	TCP_PROBE2(debug__user, tp, PRU_SLOWTIMO);
	INP_WUNLOCK(inp);
out:
	CURVNET_RESTORE();
}
开发者ID:jaredmcneill,项目名称:freebsd,代码行数:81,代码来源:tcp_timer.c


示例20: tcp_timer_rexmt

void
tcp_timer_rexmt(void * xtp)
{
	struct tcpcb *tp = xtp;
	CURVNET_SET(tp->t_vnet);
	int rexmt;
	struct inpcb *inp;
#ifdef TCPDEBUG
	int ostate;

	ostate = tp->t_state;
#endif
	inp = tp->t_inpcb;
	KASSERT(inp != NULL, ("%s: tp %p tp->t_inpcb == NULL", __func__, tp));
	INP_WLOCK(inp);
	if (callout_pending(&tp->t_timers->tt_rexmt) ||
	    !callout_active(&tp->t_timers->tt_rexmt)) {
		INP_WUNLOCK(inp);
		CURVNET_RESTORE();
		return;
	}
	callout_deactivate(&tp->t_timers->tt_rexmt);
	if ((inp->inp_flags & INP_DROPPED) != 0) {
		INP_WUNLOCK(inp);
		CURVNET_RESTORE();
		return;
	}
	KASSERT((tp->t_timers->tt_flags & TT_STOPPED) == 0,
		("%s: tp %p tcpcb can't be stopped here", __func__, tp));
	tcp_free_sackholes(tp);
	if (tp->t_fb->tfb_tcp_rexmit_tmr) {
		/* The stack has a timer action too. */
		(*tp->t_fb->tfb_tcp_rexmit_tmr)(tp);
	}
	/*
	 * Retransmission timer went off.  Message has not
	 * been acked within retransmit interval.  Back off
	 * to a longer retransmit interval and retransmit one segment.
	 */
	if (++tp->t_rxtshift > TCP_MAXRXTSHIFT) {
		tp->t_rxtshift = TCP_MAXRXTSHIFT;
		TCPSTAT_INC(tcps_timeoutdrop);
		if (tcp_inpinfo_lock_add(inp)) {
			tcp_inpinfo_lock_del(inp, tp);
			goto out;
		}
		tp = tcp_drop(tp, tp->t_softerror ?
			      tp->t_softerror : ETIMEDOUT);
		tcp_inpinfo_lock_del(inp, tp);
		goto out;
	}
	if (tp->t_state == TCPS_SYN_SENT) {
		/*
		 * If the SYN was retransmitted, indicate CWND to be
		 * limited to 1 segment in cc_conn_init().
		 */
		tp->snd_cwnd = 1;
	} else if (tp->t_rxtshift == 1) {
		/*
		 * first retransmit; record ssthresh and cwnd so they can
		 * be recovered if this turns out to be a "bad" retransmit.
		 * A retransmit is considered "bad" if an ACK for this
		 * segment is received within RTT/2 interval; the assumption
		 * here is that the ACK was already in flight.  See
		 * "On Estimating End-to-End Network Path Properties" by
		 * Allman and Paxson for more details.
		 */
		tp->snd_cwnd_prev = tp->snd_cwnd;
		tp->snd_ssthresh_prev = tp->snd_ssthresh;
		tp->snd_recover_prev = tp->snd_recover;
		if (IN_FASTRECOVERY(tp->t_flags))
			tp->t_flags |= TF_WASFRECOVERY;
		else
			tp->t_flags &= ~TF_WASFRECOVERY;
		if (IN_CONGRECOVERY(tp->t_flags))
			tp->t_flags |= TF_WASCRECOVERY;
		else
			tp->t_flags &= ~TF_WASCRECOVERY;
		tp->t_badrxtwin = ticks + (tp->t_srtt >> (TCP_RTT_SHIFT + 1));
		tp->t_flags |= TF_PREVVALID;
	} else
开发者ID:jaredmcneill,项目名称:freebsd,代码行数:81,代码来源:tcp_timer.c



注:本文中的CURVNET_SET函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ CU_ASSERT_DOUBLE_EQUAL函数代码示例发布时间:2022-05-30
下一篇:
C++ CURVNET_RESTORE函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap