C++ CPLGetFilename函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CPLGetFilename函数的典型用法代码示例。如果您正苦于以下问题：C++ CPLGetFilename函数的具体用法？C++ CPLGetFilename怎么用？C++ CPLGetFilename使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CPLGetFilename函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GetDatasetFast

bool wxGxOpenFileGDB::Move(const CPLString &szDestPath, ITrackCancel* const pTrackCancel)
{
    wxGISDataset* pDSet = GetDatasetFast();

    if (NULL != pDSet)
    {
        pDSet->Close();
        wsDELETE(pDSet);
    }

    if (pTrackCancel)
        pTrackCancel->PutMessage(wxString::Format(_("%s %s %s"), _("Move"), GetCategory().c_str(), m_sName.c_str()), wxNOT_FOUND, enumGISMessageInfo);

    //CPLString szFullDestPath = CPLFormFilename(szDestPath, CPLGetFilename(m_sPath), NULL);
    CPLString szFullDestPath = CheckUniqPath(szDestPath, CPLGetFilename(m_sPath), true, " ");

    bool bRet = MoveDir(m_sPath, szFullDestPath, 777, pTrackCancel);
    if (!bRet)
    {
        const char* err = CPLGetLastErrorMsg();
        wxString sErr = wxString::Format(_("Operation '%s' failed! GDAL error: %s, %s '%s'"), _("Move"), GetCategory().c_str(), wxString(err, wxConvUTF8).c_str(), wxString(m_sPath, wxConvUTF8).c_str());
        wxLogError(sErr);
        if (pTrackCancel)
            pTrackCancel->PutMessage(sErr, wxNOT_FOUND, enumGISMessageErr);
        return false;
    }

    return true;
}

开发者ID:GimpoByte，项目名称:nextgismanager，代码行数:29，代码来源:gxlocaldb.cpp

示例2: CPLFormCIFilename

int TSXDataset::Identify( GDALOpenInfo *poOpenInfo )
{
    if (poOpenInfo->fpL == NULL || poOpenInfo->nHeaderBytes < 260)
    {
        if( poOpenInfo->bIsDirectory )
        {
            const CPLString osFilename =
                CPLFormCIFilename( poOpenInfo->pszFilename, CPLGetFilename( poOpenInfo->pszFilename ), "xml" );

            /* Check if the filename contains TSX1_SAR (TerraSAR-X) or TDX1_SAR (TanDEM-X) */
            if (!(STARTS_WITH_CI(CPLGetBasename( osFilename ), "TSX1_SAR") ||
                  STARTS_WITH_CI(CPLGetBasename( osFilename ), "TDX1_SAR")))
                return 0;

            VSIStatBufL sStat;
            if( VSIStatL( osFilename, &sStat ) == 0 )
                return 1;
        }

        return 0;
    }

    /* Check if the filename contains TSX1_SAR (TerraSAR-X) or TDX1_SAR (TanDEM-X) */
    if (!(STARTS_WITH_CI(CPLGetBasename( poOpenInfo->pszFilename ), "TSX1_SAR") ||
          STARTS_WITH_CI(CPLGetBasename( poOpenInfo->pszFilename ), "TDX1_SAR")))
        return 0;

    /* finally look for the <level1Product tag */
    if (!STARTS_WITH_CI(reinterpret_cast<char *>( poOpenInfo->pabyHeader ),
                        "<level1Product") )
        return 0;

    return 1;
}

开发者ID:Wedjaa，项目名称:node-gdal，代码行数:34，代码来源:tsxdataset.cpp

示例3: osFilename

int CTGDataset::Identify( GDALOpenInfo * poOpenInfo )
{
    CPLString osFilename(poOpenInfo->pszFilename);

    GDALOpenInfo* poOpenInfoToDelete = NULL;
    /*  GZipped grid_cell.gz files are common, so automagically open them */
    /*  if the /vsigzip/ has not been explicitely passed */
    const char* pszFilename = CPLGetFilename(poOpenInfo->pszFilename);
    if ((EQUAL(pszFilename, "grid_cell.gz") ||
         EQUAL(pszFilename, "grid_cell1.gz") ||
         EQUAL(pszFilename, "grid_cell2.gz")) &&
        !EQUALN(poOpenInfo->pszFilename, "/vsigzip/", 9))
    {
        osFilename = "/vsigzip/";
        osFilename += poOpenInfo->pszFilename;
        poOpenInfo = poOpenInfoToDelete =
                new GDALOpenInfo(osFilename.c_str(), GA_ReadOnly,
                                 poOpenInfo->papszSiblingFiles);
    }

    if (poOpenInfo->nHeaderBytes < HEADER_LINE_COUNT * 80)
    {
        delete poOpenInfoToDelete;
        return FALSE;
    }

/* -------------------------------------------------------------------- */
/*      Chech that it looks roughly as a CTG dataset                    */
/* -------------------------------------------------------------------- */
    const char* pszData = (const char*)poOpenInfo->pabyHeader;
    int i;
    for(i=0;i<4 * 80;i++)
    {
        if (!((pszData[i] >= '0' && pszData[i] <= '9') ||
              pszData[i] == ' ' || pszData[i] == '-'))
        {
            delete poOpenInfoToDelete;
            return FALSE;
        }
    }

    char szField[11];
    int nRows = atoi(ExtractField(szField, pszData, 0, 10));
    int nCols = atoi(ExtractField(szField, pszData, 20, 10));
    int nMinColIndex = atoi(ExtractField(szField, pszData+80, 0, 5));
    int nMinRowIndex = atoi(ExtractField(szField, pszData+80, 5, 5));
    int nMaxColIndex = atoi(ExtractField(szField, pszData+80, 10, 5));
    int nMaxRowIndex = atoi(ExtractField(szField, pszData+80, 15, 5));

    if (nRows <= 0 || nCols <= 0 ||
        nMinColIndex != 1 || nMinRowIndex != 1 ||
        nMaxRowIndex != nRows || nMaxColIndex != nCols)
    {
        delete poOpenInfoToDelete;
        return FALSE;
    }

    delete poOpenInfoToDelete;
    return TRUE;
}

开发者ID:AsherBond，项目名称:MondocosmOS，代码行数:60，代码来源:ctgdataset.cpp

示例4: CPLStrdup

void OGRCSVDataSource::CreateForSingleFile( const char* pszDirname,
                                            const char *pszFilename )
{
    pszName = CPLStrdup( pszDirname );
    bUpdate = true;
    osDefaultCSVName = CPLGetFilename(pszFilename);
}

开发者ID:Mavrx-inc，项目名称:gdal，代码行数:7，代码来源:ogrcsvdatasource.cpp

示例5: CPLFormCIFilename

int TSXDataset::Identify( GDALOpenInfo *poOpenInfo )
{
    if (poOpenInfo->fpL == NULL || poOpenInfo->nHeaderBytes < 260)
    {
        if( poOpenInfo->bIsDirectory )
        {
            CPLString osFilename =
                CPLFormCIFilename( poOpenInfo->pszFilename, CPLGetFilename( poOpenInfo->pszFilename ), "xml" );

            /* Check if the filename contains TSX1_SAR (TerraSAR-X) or TDX1_SAR (TanDEM-X) */
            if (!(EQUALN(CPLGetBasename( osFilename ), "TSX1_SAR", 8) ||
                  EQUALN(CPLGetBasename( osFilename ), "TDX1_SAR", 8)))
                return 0;

            VSIStatBufL sStat;
            if( VSIStatL( osFilename, &sStat ) == 0 )
                return 1;
        }

        return 0;
    }

    /* Check if the filename contains TSX1_SAR (TerraSAR-X) or TDX1_SAR (TanDEM-X) */
    if (!(EQUALN(CPLGetBasename( poOpenInfo->pszFilename ), "TSX1_SAR", 8) ||
          EQUALN(CPLGetBasename( poOpenInfo->pszFilename ), "TDX1_SAR", 8)))
        return 0;

    /* finally look for the <level1Product tag */
    if (!EQUALN((char *)poOpenInfo->pabyHeader, "<level1Product", 14))
        return 0;

    return 1;
}

开发者ID:rashadkm，项目名称:lib_gdal，代码行数:33，代码来源:tsxdataset.cpp

示例6: CPLGetFilename

int SRTMHGTDataset::Identify( GDALOpenInfo * poOpenInfo )

{
  const char* fileName = CPLGetFilename(poOpenInfo->pszFilename);
  if( strlen(fileName) < 11 || fileName[7] != '.' )
    return FALSE;
  CPLString osLCFilename(CPLString(fileName).tolower());
  if( (osLCFilename[0] != 'n' && osLCFilename[0] != 's') ||
      (osLCFilename[3] != 'e' && osLCFilename[3] != 'w') )
      return FALSE;
  if( !STARTS_WITH(fileName, "/vsizip/") &&
      osLCFilename.endsWith(".hgt.zip") )
  {
    CPLString osNewName("/vsizip/");
    osNewName += poOpenInfo->pszFilename;
    osNewName += "/";
    osNewName += CPLString(fileName).substr(0, 7);
    osNewName += ".hgt";
    GDALOpenInfo oOpenInfo(osNewName, GA_ReadOnly);
    return Identify(&oOpenInfo);
  }

  if( !STARTS_WITH(fileName, "/vsizip/") &&
      osLCFilename.endsWith(".srtmswbd.raw.zip") )
  {
    CPLString osNewName("/vsizip/");
    osNewName += poOpenInfo->pszFilename;
    osNewName += "/";
    osNewName += CPLString(fileName).substr(0, 7);
    osNewName += ".raw";
    GDALOpenInfo oOpenInfo(osNewName, GA_ReadOnly);
    return Identify(&oOpenInfo);
  }


  if( !osLCFilename.endsWith(".hgt") &&
      !osLCFilename.endsWith(".raw") &&
      !osLCFilename.endsWith(".hgt.gz") )
    return FALSE;

/* -------------------------------------------------------------------- */
/*      We check the file size to see if it is                          */
/*      SRTM1 (below or above lat 50) or SRTM 3                         */
/* -------------------------------------------------------------------- */
  VSIStatBufL fileStat;

  if(VSIStatL(poOpenInfo->pszFilename, &fileStat) != 0)
      return FALSE;
  if(fileStat.st_size != 3601 * 3601 &&
     fileStat.st_size != 3601 * 3601 * 2 &&
     fileStat.st_size != 1801 * 3601 * 2 &&
     fileStat.st_size != 1201 * 1201 * 2 )
      return FALSE;

  return TRUE;
}

开发者ID:hdfeos，项目名称:gdal，代码行数:56，代码来源:srtmhgtdataset.cpp

示例7: CSLFindString

int OGROpenFileGDBDataSource::FileExists(const char* pszFilename)
{
    if( m_papszFiles )
        return CSLFindString(m_papszFiles, CPLGetFilename(pszFilename)) >= 0;
    else
    {
        VSIStatBufL sStat;
        return VSIStatExL(pszFilename, &sStat, VSI_STAT_EXISTS_FLAG) == 0;
    }
}

开发者ID:garnertb，项目名称:gdal，代码行数:10，代码来源:ogropenfilegdbdatasource.cpp

示例8: GDALMDReaderPleiades

/**
 * GDALMDReaderSpot()
 */
GDALMDReaderSpot::GDALMDReaderSpot(const char *pszPath,
        char **papszSiblingFiles) : GDALMDReaderPleiades(pszPath, papszSiblingFiles)
{
    const char* pszIMDSourceFilename;
    const char* pszDirName = CPLGetDirname(pszPath);

    if(m_osIMDSourceFilename.empty())
    {
        pszIMDSourceFilename = CPLFormFilename( pszDirName, "METADATA.DIM", NULL );

        if (CPLCheckForFile((char*)pszIMDSourceFilename, papszSiblingFiles))
        {
            m_osIMDSourceFilename = pszIMDSourceFilename;
        }
        else
        {
            pszIMDSourceFilename = CPLFormFilename( pszDirName, "metadata.dim", NULL );
            if (CPLCheckForFile((char*)pszIMDSourceFilename, papszSiblingFiles))
            {
                m_osIMDSourceFilename = pszIMDSourceFilename;
            }
        }
    }

    // if the file name ended on METADATA.DIM
    // Linux specific
    // example: R2_CAT_091028105025131_1\METADATA.DIM
    if(m_osIMDSourceFilename.empty())
    {
        if(EQUAL(CPLGetFilename(pszPath), "IMAGERY.TIF"))
        {
            pszIMDSourceFilename = CPLSPrintf( "%s\\METADATA.DIM",
                                                           CPLGetPath(pszPath));

            if (CPLCheckForFile((char*)pszIMDSourceFilename, papszSiblingFiles))
            {
                m_osIMDSourceFilename = pszIMDSourceFilename;
            }
            else
            {
                pszIMDSourceFilename = CPLSPrintf( "%s\\metadata.dim",
                                                           CPLGetPath(pszPath));
                if (CPLCheckForFile((char*)pszIMDSourceFilename, papszSiblingFiles))
                {
                    m_osIMDSourceFilename = pszIMDSourceFilename;
                }
            }
        }
    }

    if(m_osIMDSourceFilename.size())
        CPLDebug( "MDReaderSpot", "IMD Filename: %s",
              m_osIMDSourceFilename.c_str() );
}

开发者ID:Wedjaa，项目名称:node-gdal，代码行数:57，代码来源:reader_spot.cpp

示例9: Reset

int OGRXPlaneDataSource::Open( const char * pszFilename, int bReadWholeFile )

{
    Reset();

    this->bReadWholeFile = bReadWholeFile;

    const char* pszShortFilename = CPLGetFilename(pszFilename);
    if (EQUAL(pszShortFilename, "nav.dat") ||
        EQUAL(pszShortFilename, "earth_nav.dat"))
    {
        poReader = OGRXPlaneCreateNavFileReader(this);
    }
    else if (EQUAL(pszShortFilename, "apt.dat"))
    {
        poReader = OGRXPlaneCreateAptFileReader(this);
    }
    else if (EQUAL(pszShortFilename, "fix.dat") ||
             EQUAL(pszShortFilename, "earth_fix.dat"))
    {
        poReader = OGRXPlaneCreateFixFileReader(this);
    }
    else if (EQUAL(pszShortFilename, "awy.dat") ||
             EQUAL(pszShortFilename, "earth_awy.dat"))
    {
        poReader = OGRXPlaneCreateAwyFileReader(this);
    }

    int bRet;
    if (poReader && poReader->StartParsing(pszFilename) == FALSE)
    {
        delete poReader;
        poReader = NULL;
    }
    if (poReader)
    {
        pszName = CPLStrdup(pszFilename);

        if ( !bReadWholeFile )
        {
            for( int i = 0; i < nLayers; i++ )
                papoLayers[i]->SetReader(poReader->CloneForLayer(papoLayers[i]));
        }
        bRet = TRUE;
    }
    else
        bRet = FALSE;

    return bRet;
}

开发者ID:0004c，项目名称:node-gdal，代码行数:50，代码来源:ogrxplanedatasource.cpp

示例10: CPLGetFilename

CPLErr
GDALDefaultOverviews::BuildOverviewsSubDataset(
    const char * pszPhysicalFile,
    const char * pszResampling,
    int nOverviews, int * panOverviewList,
    int nBands, int * panBandList,
    GDALProgressFunc pfnProgress, void * pProgressData)

{
    if( osOvrFilename.length() == 0 && nOverviews > 0 )
    {
        VSIStatBufL sStatBuf;

        int iSequence = 0;  // Used after for.
        for( iSequence = 0; iSequence < 100; iSequence++ )
        {
            osOvrFilename.Printf( "%s_%d.ovr", pszPhysicalFile, iSequence );
            if( VSIStatExL( osOvrFilename, &sStatBuf,
                            VSI_STAT_EXISTS_FLAG ) != 0 )
            {
                CPLString osAdjustedOvrFilename;

                if( poDS->GetMOFlags() & GMO_PAM_CLASS )
                {
                    osAdjustedOvrFilename.Printf(
                        ":::BASE:::%s_%d.ovr",
                        CPLGetFilename(pszPhysicalFile),
                        iSequence );
                }
                else
                {
                    osAdjustedOvrFilename = osOvrFilename;
                }

                poDS->SetMetadataItem( "OVERVIEW_FILE",
                                       osAdjustedOvrFilename,
                                       "OVERVIEWS" );
                break;
            }
        }

        if( iSequence == 100 )
            osOvrFilename = "";
    }

    return BuildOverviews( NULL, pszResampling, nOverviews, panOverviewList,
                           nBands, panBandList, pfnProgress, pProgressData );
}

开发者ID:ryandavid，项目名称:rotobox，代码行数:48，代码来源:gdaldefaultoverviews.cpp

示例11: CPLFormCIFilename

int SAFEDataset::Identify( GDALOpenInfo *poOpenInfo )
{
    /* Check for the case where we're trying to read the calibrated data: */
    if (STARTS_WITH_CI(poOpenInfo->pszFilename, "SENTINEL1_CALIB:")) {
        return TRUE;
    }

    /* Check for the case where we're trying to read the subdatasets: */
    if (STARTS_WITH_CI(poOpenInfo->pszFilename, "SENTINEL1_DS:")) {
        return TRUE;
    }

    /* Check for directory access when there is a manifest.safe file in the
       directory. */
    if( poOpenInfo->bIsDirectory )
    {
        VSIStatBufL sStat;

        CPLString osMDFilename =
            CPLFormCIFilename( poOpenInfo->pszFilename, "manifest.safe", nullptr );

        if( VSIStatL( osMDFilename, &sStat ) == 0 && VSI_ISREG(sStat.st_mode) )
        {
            GDALOpenInfo oOpenInfo( osMDFilename, GA_ReadOnly, nullptr );
            return Identify(&oOpenInfo);
        }

        return FALSE;
    }

    /* otherwise, do our normal stuff */
    if( !EQUAL(CPLGetFilename(poOpenInfo->pszFilename), "manifest.safe") )
        return FALSE;

    if( poOpenInfo->nHeaderBytes < 100 )
        return FALSE;

    if( strstr((const char *) poOpenInfo->pabyHeader, "<xfdu:XFDU" ) == nullptr)
        return FALSE;

    // This driver doesn't handle Sentinel-2 data
    if( strstr((const char *) poOpenInfo->pabyHeader, "sentinel-2" ) != nullptr)
        return FALSE;

    return TRUE;
}

开发者ID:tbonfort，项目名称:gdal，代码行数:46，代码来源:safedataset.cpp

示例12: locker

bool wxGISDataset::Move(const CPLString &szDestPath, ITrackCancel* const pTrackCancel)
{
	wxCriticalSectionLocker locker(m_CritSect);

    Close();

    char** papszFileList = GetFileList();
    papszFileList = CSLAddString( papszFileList, m_sPath );
    if(!papszFileList)    
    {
        if(pTrackCancel)
            pTrackCancel->PutMessage(_("No files to move"), wxNOT_FOUND, enumGISMessageErr);
        return false;
    }

    CPLString szFileName = CPLGetBasename(GetUniqPath(m_sPath, szDestPath, CPLGetBasename(m_sPath)));

    char** papszMovedFileList = NULL;

	for(int i = 0; papszFileList[i] != NULL; ++i )
    {
		CPLString szNewDestFileName(CPLFormFilename(szDestPath, szFileName, GetExtension(papszFileList[i], szFileName)));
        papszMovedFileList = CSLAddString(papszMovedFileList, szNewDestFileName);
        if(!MoveFile(szNewDestFileName, papszFileList[i], pTrackCancel))
		{
            // Try to put the ones we moved back.
            pTrackCancel->Reset();
            for( --i; i >= 0; i-- )
                MoveFile( papszFileList[i], papszMovedFileList[i]);

			CSLDestroy( papszFileList );
			CSLDestroy( papszMovedFileList );
            return false;
		}
    }

    m_sPath = CPLFormFilename(szDestPath, CPLGetFilename(m_sPath), NULL);

	CSLDestroy( papszFileList );
	CSLDestroy( papszMovedFileList );
    return true;
}

开发者ID:Mileslee，项目名称:wxgis，代码行数:42，代码来源:dataset.cpp

示例13: CPLGetFilename

int SRTMHGTDataset::Identify( GDALOpenInfo * poOpenInfo )

{
  const char* fileName = CPLGetFilename(poOpenInfo->pszFilename);
  if( strlen(fileName) < 11 || !EQUALN(&fileName[7], ".hgt", 4) )
    return FALSE;

/* -------------------------------------------------------------------- */
/*	We check the file size to see if it is 25,934,402 bytes	        */
/*	(SRTM 1) or 2,884,802 bytes (SRTM 3)				*/    
/* -------------------------------------------------------------------- */
  VSIStatBufL fileStat;

  if(VSIStatL(poOpenInfo->pszFilename, &fileStat) != 0)
      return FALSE;
  if(fileStat.st_size != 25934402 && fileStat.st_size != 2884802)
      return FALSE;

  return TRUE;
}

开发者ID:dlsyaim，项目名称:osgEarthX，代码行数:20，代码来源:srtmhgtdataset.cpp

示例14: EQUAL

static GDALDataset *OGRTABDriverOpen( GDALOpenInfo* poOpenInfo )

{
    OGRTABDataSource    *poDS;

    if( OGRTABDriverIdentify(poOpenInfo) == FALSE )
    {
        return NULL;
    }

    if (EQUAL(CPLGetExtension(poOpenInfo->pszFilename), "MIF") ||
        EQUAL(CPLGetExtension(poOpenInfo->pszFilename), "MID") )
    {
        if( poOpenInfo->eAccess == GA_Update )
            return NULL;
    }

#ifdef DEBUG
    /* For AFL, so that .cur_input is detected as the archive filename */
    if( poOpenInfo->fpL != NULL &&
        !STARTS_WITH(poOpenInfo->pszFilename, "/vsitar/") &&
        EQUAL(CPLGetFilename(poOpenInfo->pszFilename), ".cur_input") )
    {
        GDALOpenInfo oOpenInfo( (CPLString("/vsitar/") + poOpenInfo->pszFilename).c_str(),
                                poOpenInfo->nOpenFlags );
        oOpenInfo.papszOpenOptions = poOpenInfo->papszOpenOptions;
        return OGRTABDriverOpen(&oOpenInfo);
    }
#endif

    poDS = new OGRTABDataSource();
    if( poDS->Open( poOpenInfo, TRUE ) )
        return poDS;
    else
    {
        delete poDS;
        return NULL;
    }
}

开发者ID:Wedjaa，项目名称:node-gdal，代码行数:39，代码来源:mitab_ogr_driver.cpp

示例15: GetGxCatalog

bool wxGxLocalDBFactory::GetChildren(wxGxObject* pParent, char** &pFileNames, wxArrayLong & pChildrenIds)
{
    wxGxCatalogBase* pCatalog = GetGxCatalog();
    bool bCheckNames = CSLCount(pFileNames) < CHECK_DUBLES_MAX_COUNT;
    for(int i = CSLCount(pFileNames) - 1; i >= 0; i-- )
    {
        VSIStatBufL BufL;
        int ret = VSIStatL(pFileNames[i], &BufL);
        if(ret == 0)
        {
            if (VSI_ISDIR(BufL.st_mode) && wxGISEQUAL(CPLGetExtension(pFileNames[i]), "gdb"))
            {
                wxGxObject* pObj = GetGxObject(pParent, wxString(CPLGetFilename(pFileNames[i]), wxConvUTF8), pFileNames[i], enumContGDBFolder, bCheckNames);
                if(pObj)
                    pChildrenIds.Add(pObj->GetId());
                pFileNames = CSLRemoveStrings( pFileNames, i, 1, NULL );
            }
            //TODO: mdb, sqlite, db extensions
        }
    }
    return true;
}

开发者ID:GimpoByte，项目名称:nextgismanager，代码行数:22，代码来源:gxlocaldbfactory.cpp

示例16: OGRTABDriverIdentify

static int OGRTABDriverIdentify( GDALOpenInfo* poOpenInfo )

{
    /* Files not ending with .tab, .mif or .mid are not handled by this driver */
    if( !poOpenInfo->bStatOK )
        return FALSE;
    if( poOpenInfo->bIsDirectory )
        return -1; /* unsure */
    if( poOpenInfo->fpL == NULL )
        return FALSE;
    if (EQUAL(CPLGetExtension(poOpenInfo->pszFilename), "MIF") ||
        EQUAL(CPLGetExtension(poOpenInfo->pszFilename), "MID") )
    {
        return TRUE;
    }
    if (EQUAL(CPLGetExtension(poOpenInfo->pszFilename), "TAB") )
    {
        for( int i = 0; i < poOpenInfo->nHeaderBytes; i++)
        {
            const char* pszLine = (const char*)poOpenInfo->pabyHeader + i;
            if (STARTS_WITH_CI(pszLine, "Fields"))
                return TRUE;
            else if (STARTS_WITH_CI(pszLine, "create view"))
                return TRUE;
            else if (STARTS_WITH_CI(pszLine, "\"\\IsSeamless\" = \"TRUE\""))
                return TRUE;
        }
    }
#ifdef DEBUG
    /* For AFL, so that .cur_input is detected as the archive filename */
    if( !STARTS_WITH(poOpenInfo->pszFilename, "/vsitar/") &&
        EQUAL(CPLGetFilename(poOpenInfo->pszFilename), ".cur_input") )
    {
        return -1;
    }
#endif
    return FALSE;
}

开发者ID:ryandavid，项目名称:rotobox，代码行数:38，代码来源:mitab_ogr_driver.cpp

示例17: getRscFilename

static CPLString getRscFilename( GDALOpenInfo *poOpenInfo )
{
    CPLString osRscFilename;

    char **papszSiblingFiles = poOpenInfo->GetSiblingFiles();
    if ( papszSiblingFiles == NULL )
    {
        osRscFilename = CPLFormFilename( NULL, poOpenInfo->pszFilename,
                                        "rsc" );
        VSIStatBufL psRscStatBuf;
        if ( VSIStatL( osRscFilename, &psRscStatBuf ) != 0 )
        {
            osRscFilename = "";
        }
    }
    else
    {
        /* ------------------------------------------------------------ */
        /*      We need to tear apart the filename to form a .rsc       */
        /*      filename.                                               */
        /* ------------------------------------------------------------ */
        CPLString osPath = CPLGetPath( poOpenInfo->pszFilename );
        CPLString osName = CPLGetFilename( poOpenInfo->pszFilename );

        int iFile = CSLFindString( papszSiblingFiles,
                                   CPLFormFilename( NULL, osName, "rsc" ) );
        if( iFile >= 0 )
        {
            osRscFilename = CPLFormFilename( osPath,
                                             papszSiblingFiles[iFile],
                                             NULL );
        }
    }

    return osRscFilename;
}

开发者ID:nextgis-borsch，项目名称:lib_gdal，代码行数:36，代码来源:roipacdataset.cpp

示例18: CPLStrdup

int OGRCSVDataSource::Open( const char * pszFilename, int bUpdateIn,
                            int bForceOpen, char** papszOpenOptions )

{
    pszName = CPLStrdup( pszFilename );
    bUpdate = bUpdateIn;

    if (bUpdateIn && bForceOpen && EQUAL(pszFilename, "/vsistdout/"))
        return TRUE;

    /* For writable /vsizip/, do nothing more */
    if (bUpdateIn && bForceOpen && strncmp(pszFilename, "/vsizip/", 8) == 0)
        return TRUE;

    CPLString osFilename(pszFilename);
    CPLString osBaseFilename = CPLGetFilename(pszFilename);
    CPLString osExt = GetRealExtension(osFilename);
    pszFilename = NULL;

    int bIgnoreExtension = EQUALN(osFilename, "CSV:", 4);
    int bUSGeonamesFile = FALSE;
    /* int bGeonamesOrgFile = FALSE; */
    if (bIgnoreExtension)
    {
        osFilename = osFilename + 4;
    }

    /* Those are *not* real .XLS files, but text file with tab as column separator */
    if (EQUAL(osBaseFilename, "NfdcFacilities.xls") ||
        EQUAL(osBaseFilename, "NfdcRunways.xls") ||
        EQUAL(osBaseFilename, "NfdcRemarks.xls") ||
        EQUAL(osBaseFilename, "NfdcSchedules.xls"))
    {
        if (bUpdateIn)
            return FALSE;
        bIgnoreExtension = TRUE;
    }
    else if ((EQUALN(osBaseFilename, "NationalFile_", 13) ||
              EQUALN(osBaseFilename, "POP_PLACES_", 11) ||
              EQUALN(osBaseFilename, "HIST_FEATURES_", 14) ||
              EQUALN(osBaseFilename, "US_CONCISE_", 11) ||
              EQUALN(osBaseFilename, "AllNames_", 9) ||
              EQUALN(osBaseFilename, "Feature_Description_History_", 28) ||
              EQUALN(osBaseFilename, "ANTARCTICA_", 11) ||
              EQUALN(osBaseFilename, "GOVT_UNITS_", 11) ||
              EQUALN(osBaseFilename, "NationalFedCodes_", 17) ||
              EQUALN(osBaseFilename, "AllStates_", 10) ||
              EQUALN(osBaseFilename, "AllStatesFedCodes_", 18) ||
              (strlen(osBaseFilename) > 2 && EQUALN(osBaseFilename+2, "_Features_", 10)) ||
              (strlen(osBaseFilename) > 2 && EQUALN(osBaseFilename+2, "_FedCodes_", 10))) &&
             (EQUAL(osExt, "txt") || EQUAL(osExt, "zip")) )
    {
        if (bUpdateIn)
            return FALSE;
        bIgnoreExtension = TRUE;
        bUSGeonamesFile = TRUE;

        if (EQUAL(osExt, "zip") &&
            strstr(osFilename, "/vsizip/") == NULL )
        {
            osFilename = "/vsizip/" + osFilename;
        }
    }
    else if (EQUAL(osBaseFilename, "allCountries.txt") ||
             EQUAL(osBaseFilename, "allCountries.zip"))
    {
        if (bUpdateIn)
            return FALSE;
        bIgnoreExtension = TRUE;
        /* bGeonamesOrgFile = TRUE; */

        if (EQUAL(osExt, "zip") &&
            strstr(osFilename, "/vsizip/") == NULL )
        {
            osFilename = "/vsizip/" + osFilename;
        }
    }

/* -------------------------------------------------------------------- */
/*      Determine what sort of object this is.                          */
/* -------------------------------------------------------------------- */
    VSIStatBufL sStatBuf;

    if( VSIStatExL( osFilename, &sStatBuf, VSI_STAT_NATURE_FLAG ) != 0 )
        return FALSE;

/* -------------------------------------------------------------------- */
/*      Is this a single CSV file?                                      */
/* -------------------------------------------------------------------- */
    if( VSI_ISREG(sStatBuf.st_mode)
        && (bIgnoreExtension || EQUAL(osExt,"csv") || EQUAL(osExt,"tsv")) )
    {
        if (EQUAL(CPLGetFilename(osFilename), "NfdcFacilities.xls"))
        {
            return OpenTable( osFilename, papszOpenOptions, "ARP");
        }
        else if (EQUAL(CPLGetFilename(osFilename), "NfdcRunways.xls"))
        {
            OpenTable( osFilename, papszOpenOptions, "BaseEndPhysical");
            OpenTable( osFilename, papszOpenOptions, "BaseEndDisplaced");
//.........这里部分代码省略.........

开发者ID:MattLatt，项目名称:GDAL_2.0.x_VC，代码行数:101，代码来源:ogrcsvdatasource.cpp

示例19: STARTS_WITH_CI

GDALDataset *PAuxDataset::Open( GDALOpenInfo * poOpenInfo )

{
    if( poOpenInfo->nHeaderBytes < 1 )
        return NULL;

/* -------------------------------------------------------------------- */
/*      If this is an .aux file, fetch out and form the name of the     */
/*      file it references.                                             */
/* -------------------------------------------------------------------- */

    CPLString osTarget = poOpenInfo->pszFilename;

    if( EQUAL(CPLGetExtension( poOpenInfo->pszFilename ),"aux")
        && STARTS_WITH_CI((const char *) poOpenInfo->pabyHeader, "AuxilaryTarget: "))
    {
        char szAuxTarget[1024];
        const char *pszSrc = reinterpret_cast<const char *>(
            poOpenInfo->pabyHeader+16 );

        int i = 0;
        for( ;
             pszSrc[i] != 10 && pszSrc[i] != 13 && pszSrc[i] != '\0'
                 && i < static_cast<int>( sizeof(szAuxTarget) ) - 1;
             i++ )
        {
            szAuxTarget[i] = pszSrc[i];
        }
        szAuxTarget[i] = '\0';

        char *pszPath = CPLStrdup(CPLGetPath(poOpenInfo->pszFilename));
        osTarget = CPLFormFilename(pszPath, szAuxTarget, NULL);
        CPLFree(pszPath);
    }

/* -------------------------------------------------------------------- */
/*      Now we need to tear apart the filename to form a .aux           */
/*      filename.                                                       */
/* -------------------------------------------------------------------- */
    CPLString osAuxFilename = CPLResetExtension(osTarget,"aux");

/* -------------------------------------------------------------------- */
/*      Do we have a .aux file?                                         */
/* -------------------------------------------------------------------- */
    char** papszSiblingFiles = poOpenInfo->GetSiblingFiles();
    if( papszSiblingFiles != NULL
        && CSLFindString( papszSiblingFiles,
                          CPLGetFilename(osAuxFilename) ) == -1 )
    {
        return NULL;
    }

    VSILFILE *fp = VSIFOpenL( osAuxFilename, "r" );
    if( fp == NULL )
    {
        osAuxFilename = CPLResetExtension(osTarget,"AUX");
        fp = VSIFOpenL( osAuxFilename, "r" );
    }

    if( fp == NULL )
        return NULL;

/* -------------------------------------------------------------------- */
/*      Is this file a PCI .aux file?  Check the first line for the     */
/*      telltale AuxilaryTarget keyword.                                */
/*                                                                      */
/*      At this point we should be verifying that it refers to our      */
/*      binary file, but that is a pretty involved test.                */
/* -------------------------------------------------------------------- */
    const char *pszLine = CPLReadLineL( fp );

    CPL_IGNORE_RET_VAL(VSIFCloseL( fp ));

    if( pszLine == NULL
        || (!STARTS_WITH_CI(pszLine, "AuxilaryTarget")
            && !STARTS_WITH_CI(pszLine, "AuxiliaryTarget")) )
    {
        return NULL;
    }

/* -------------------------------------------------------------------- */
/*      Create a corresponding GDALDataset.                             */
/* -------------------------------------------------------------------- */
    PAuxDataset *poDS = new PAuxDataset();

/* -------------------------------------------------------------------- */
/*      Load the .aux file into a string list suitable to be            */
/*      searched with CSLFetchNameValue().                              */
/* -------------------------------------------------------------------- */
    poDS->papszAuxLines = CSLLoad( osAuxFilename );
    poDS->pszAuxFilename = CPLStrdup(osAuxFilename);

/* -------------------------------------------------------------------- */
/*      Find the RawDefinition line to establish overall parameters.    */
/* -------------------------------------------------------------------- */
    pszLine = CSLFetchNameValue(poDS->papszAuxLines, "RawDefinition");

    // It seems PCI now writes out .aux files without RawDefinition in
    // some cases.  See bug 947.
    if( pszLine == NULL )
//.........这里部分代码省略.........

开发者ID:Wedjaa，项目名称:node-gdal，代码行数:101，代码来源:pauxdataset.cpp

示例20: while

int OGRSelafinDataSource::Open(const char * pszFilename, int bUpdateIn, int bCreate) {
    // Check if a range is set and extract it and the filename
    const char *pszc=pszFilename;
    if (*pszFilename==0) return FALSE;
    while (*pszc) ++pszc;
    if (*(pszc-1)==']') {
        --pszc;
        while (pszc!=pszFilename && *pszc!='[') pszc--;
        if (pszc==pszFilename) return FALSE;
        poRange.setRange(pszc);
    }
    pszName = CPLStrdup( pszFilename );
    pszName[pszc-pszFilename]=0;
    bUpdate = bUpdateIn;
    if (bCreate && EQUAL(pszName, "/vsistdout/")) return TRUE;
    /* For writable /vsizip/, do nothing more */
    if (bCreate && STARTS_WITH(pszName, "/vsizip/")) return TRUE;
    CPLString osFilename(pszName);
    CPLString osBaseFilename = CPLGetFilename(pszName);
    // Determine what sort of object this is.
    VSIStatBufL sStatBuf;
    if (VSIStatExL( osFilename, &sStatBuf, VSI_STAT_NATURE_FLAG ) != 0) return FALSE;

    // Is this a single Selafin file?
    if (VSI_ISREG(sStatBuf.st_mode)) return OpenTable( pszName );

    // Is this a single a ZIP file with only a Selafin file inside ?
    if( STARTS_WITH(osFilename, "/vsizip/") && VSI_ISREG(sStatBuf.st_mode) ) {
        char** papszFiles = VSIReadDir(osFilename);
        if (CSLCount(papszFiles) != 1) {
            CSLDestroy(papszFiles);
            return FALSE;
        }
        osFilename = CPLFormFilename(osFilename, papszFiles[0], NULL);
        CSLDestroy(papszFiles);
        return OpenTable( osFilename );
    }

#ifdef notdef
    // Otherwise it has to be a directory.
    if( !VSI_ISDIR(sStatBuf.st_mode) ) return FALSE;

    // Scan through for entries which look like Selafin files
    int nNotSelafinCount = 0, i;
    char **papszNames = VSIReadDir( osFilename );
    for( i = 0; papszNames != NULL && papszNames[i] != NULL; i++ ) {
        CPLString oSubFilename = CPLFormFilename( osFilename, papszNames[i], NULL );
        if( EQUAL(papszNames[i],".") || EQUAL(papszNames[i],"..") ) continue;
        if( VSIStatL( oSubFilename, &sStatBuf ) != 0 || !VSI_ISREG(sStatBuf.st_mode) ) {
            nNotSelafinCount++;
            continue;
        }
        if( !OpenTable( oSubFilename ) ) {
            CPLDebug("Selafin", "Cannot open %s", oSubFilename.c_str());
            nNotSelafinCount++;
            continue;
        }
    }
    CSLDestroy( papszNames );

    // We presume that this is indeed intended to be a Selafin datasource if over half the files were Selafin files.
    return nNotSelafinCount < nLayers;
#else
    return FALSE;
#endif
}

开发者ID:Wedjaa，项目名称:node-gdal，代码行数:66，代码来源:ogrselafindatasource.cpp

注：本文中的CPLGetFilename函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CPLGetLastErrorMsg函数代码示例发布时间：2022-05-30

C++ CPLGetExtension函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9980|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9648|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ CPLGetFilename函数代码示例

示例1: GetDatasetFast

示例2: CPLFormCIFilename

示例3: osFilename

示例4: CPLStrdup

示例5: CPLFormCIFilename

示例6: CPLGetFilename

示例7: CSLFindString

示例8: GDALMDReaderPleiades

示例9: Reset

示例10: CPLGetFilename

示例11: CPLFormCIFilename

示例12: locker

示例13: CPLGetFilename

示例14: EQUAL

示例15: GetGxCatalog

示例16: OGRTABDriverIdentify

示例17: getRscFilename

示例18: CPLStrdup

示例19: STARTS_WITH_CI

示例20: while

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

切微信小程序前端制作-设备管理主界面

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

zendesk/android-floating-action-button:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053