C++ COPY函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中COPY函数的典型用法代码示例。如果您正苦于以下问题：C++ COPY函数的具体用法？C++ COPY怎么用？C++ COPY使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了COPY函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MESH_Create


//.........这里部分代码省略.........
  ERRMEM (msh->nodes = static_cast<REAL(*)[3]>(malloc (sizeof (REAL [3]) * (msh->nodes_count))));
  msh->surfeles_count = msh->bulkeles_count = 0;
  msh->surfeles = msh->bulkeles = NULL;

  /* set up elements */
  for (ele = elist; ele; ele = enx)
  {
    enx = ele->next;

    if (minimal_node > 0) /* impose 0-based indexing */
    {
      for (temp = 0; temp < ele->type; temp ++)
	ele->nodes [temp] -= minimal_node;
    }

    ele->prev = NULL;
   
    if (ele->neighs < neighs (ele->type)) /* surface element */
    {
      msh->surfeles_count ++;
      ele->next = msh->surfeles;
      if (msh->surfeles) msh->surfeles->prev = ele;
      msh->surfeles = ele;
    }
    else /* bulk element */
    {
      msh->bulkeles_count ++;
      ele->next = msh->bulkeles;
      if (msh->bulkeles) msh->bulkeles->prev = ele;
      msh->bulkeles = ele;
    }
  }

  /* create surfaces map => skip first element of 'surfaces' == the global surface kind */
  for (eleptr = (surfaces + 1), smap = NULL, temp = 0;
    eleptr [0]; eleptr += (eleptr [0]+2), temp ++)
  {
    fac = static_cast<FACE*>(MEM_Alloc (&facmem));
    
    ASSERT (
      eleptr [0] == 3 || /* triangle */
      eleptr [0] == 4,   /* quad */
      "ERROR: unsupported face type");

    fac->type = eleptr [0];
    for (n = 0; n < eleptr [0]; n ++)
      fac->nodes [n] = eleptr [n+1];
    sort (fac->nodes, fac->nodes+fac->type-1);

    fac->color = eleptr [eleptr [0] + 1];
    MAP_Insert (&mapmem, &smap, fac, /* map by the type/nodes key */
      fac, face_compare);
  }

  /* set up nodes */
  for (temp = minimal_node,
       node = msh->nodes;
       temp <= maximal_node;
       temp ++, node ++)
  {
    COPY (nodes [temp], *node);
  }

  /* set up faces */
  for (fac = flist; fac; fac = fac->next)
  {
    if (fac->ele) /* see (***) */
    {
      ele = fac->ele;

      cac = static_cast<FACE*>(MEM_Alloc (&msh->facmem));
      setup_face (ele, fac->index, cac, 0); /* setup face nodes without sorting them */
      cac->index = fac->index;
      cac->ele = fac->ele;
      setup_normal (msh->nodes, cac); /* calculate outer spatial normal */
      cac->next = ele->faces; /* append element face list */
      ele->faces = cac;

      /* set the mapped surface kind if possible => otherwise the global one */
      gac = static_cast<FACE*>(MAP_Find (smap, fac, face_compare));
      cac->color = (gac ? gac->color : surfaces [0]);
    }
  }

  /* create mesh face list */
  for (ele = msh->surfeles; ele; ele = ele->next)
  {
    for (fac = ele->faces; fac; fac = fac->next)
    {
      fac->n = msh->faces;
      msh->faces = fac;
    }
  }

  /* clean up */
  MEM_Release (&facmem);
  MEM_Release (&mapmem);

  return msh;
}

开发者ID:tkoziara，项目名称:parmec，代码行数:101，代码来源:mesh.cpp

示例2: setup_rt_frame

static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
			   sigset_t *set, struct pt_regs *regs)
{
	struct rt_sigframe __user *frame;
	unsigned long __user *retcode;
	int err = 0;

	frame = get_sigframe(ka, regs, sizeof(*frame));

	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		goto segv_and_exit;

	err |= __put_user(&frame->info, &frame->pinfo);
	err |= __put_user(&frame->uc, &frame->puc);
	err |= copy_siginfo_to_user(&frame->info, info);

	/* Clear all the bits of the ucontext we don't use.  */
	err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));

	err |= setup_sigcontext(&frame->uc.uc_mcontext,	regs, set->sig[0]);
	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));

	/* Set up to return from userspace */
	retcode = (unsigned long __user *) &frame->retcode;

	/* The access_ok check was done above, so use __put_user here */
#define COPY(x) (err |= __put_user(x, retcode++))

	COPY(0x0000002AUL | (__NR_rt_sigreturn << 7));
				/* MVK __NR_rt_sigreturn,B0 */
	COPY(0x10000000UL);	/* SWE */
	COPY(0x00006000UL);	/* NOP 4 */
	COPY(0x00006000UL);	/* NOP 4 */
	COPY(0x00006000UL);	/* NOP 4 */
	COPY(0x00006000UL);	/* NOP 4 */
	COPY(0x00006000UL);	/* NOP 4 */
	COPY(0x00006000UL);	/* NOP 4 */
	COPY(0x00006000UL);	/* NOP 4 */

#undef COPY

	if (err)
		goto segv_and_exit;

	flush_icache_range((unsigned long) &frame->retcode,
			   (unsigned long) &frame->retcode + RETCODE_SIZE);

	retcode = (unsigned long __user *) &frame->retcode;

	/* Change user context to branch to signal handler */
	regs->sp = (unsigned long) frame - 8;
	regs->b3 = (unsigned long) retcode;
	regs->pc = (unsigned long) ka->sa.sa_handler;

	/* Give the signal number to the handler */
	regs->a4 = signr;

	/*
	 * For realtime signals we must also set the second and third
	 * arguments for the signal handler.
	 *   -- Peter Maydell <[email protected]> 2000-12-06
	 */
	regs->b4 = (unsigned long)&frame->info;
	regs->a6 = (unsigned long)&frame->uc;

	return 0;

segv_and_exit:
	force_sigsegv(signr, current);
	return -EFAULT;
}

开发者ID:01org，项目名称:KVMGT-kernel，代码行数:71，代码来源:signal.c

示例3: setup_sigcontext

static int
setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
	         unsigned long mask)
{
	int err = 0;

#define COPY(x)	err |= __put_user(regs->x, &sc->sc_##x)
	COPY(r4);
	COPY(r5);
	COPY(r6);
	COPY(pt_regs);
	COPY(r0);
	COPY(r1);
	COPY(r2);
	COPY(r3);
	COPY(r7);
	COPY(r8);
	COPY(r9);
	COPY(r10);
	COPY(r11);
	COPY(r12);
	COPY(acc0h);
	COPY(acc0l);
	COPY(acc1h);		/* ISA_DSP_LEVEL2 only */
	COPY(acc1l);		/* ISA_DSP_LEVEL2 only */
	COPY(psw);
	COPY(bpc);
	COPY(bbpsw);
	COPY(bbpc);
	COPY(spu);
	COPY(fp);
	COPY(lr);
	COPY(spi);
#undef COPY

	err |= __put_user(mask, &sc->oldmask);

	return err;
}

开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:39，代码来源:signal.c

示例4: restore_sigcontext

static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p)
{
	unsigned int err = 0;
        unsigned long long current_sr, new_sr;
#define SR_MASK 0xffff8cfd

#define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)

	COPY(regs[0]);	COPY(regs[1]);	COPY(regs[2]);	COPY(regs[3]);
	COPY(regs[4]);	COPY(regs[5]);	COPY(regs[6]);	COPY(regs[7]);
	COPY(regs[8]);	COPY(regs[9]);  COPY(regs[10]);	COPY(regs[11]);
	COPY(regs[12]);	COPY(regs[13]);	COPY(regs[14]);	COPY(regs[15]);
	COPY(regs[16]);	COPY(regs[17]);	COPY(regs[18]);	COPY(regs[19]);
	COPY(regs[20]);	COPY(regs[21]);	COPY(regs[22]);	COPY(regs[23]);
	COPY(regs[24]);	COPY(regs[25]);	COPY(regs[26]);	COPY(regs[27]);
	COPY(regs[28]);	COPY(regs[29]);	COPY(regs[30]);	COPY(regs[31]);
	COPY(regs[32]);	COPY(regs[33]);	COPY(regs[34]);	COPY(regs[35]);
	COPY(regs[36]);	COPY(regs[37]);	COPY(regs[38]);	COPY(regs[39]);
	COPY(regs[40]);	COPY(regs[41]);	COPY(regs[42]);	COPY(regs[43]);
	COPY(regs[44]);	COPY(regs[45]);	COPY(regs[46]);	COPY(regs[47]);
	COPY(regs[48]);	COPY(regs[49]);	COPY(regs[50]);	COPY(regs[51]);
	COPY(regs[52]);	COPY(regs[53]);	COPY(regs[54]);	COPY(regs[55]);
	COPY(regs[56]);	COPY(regs[57]);	COPY(regs[58]);	COPY(regs[59]);
	COPY(regs[60]);	COPY(regs[61]);	COPY(regs[62]);
	COPY(tregs[0]);	COPY(tregs[1]);	COPY(tregs[2]);	COPY(tregs[3]);
	COPY(tregs[4]);	COPY(tregs[5]);	COPY(tregs[6]);	COPY(tregs[7]);

        /* Prevent the signal handler manipulating SR in a way that can
           crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be
           modified */
        current_sr = regs->sr;
        err |= __get_user(new_sr, &sc->sc_sr);
        regs->sr &= SR_MASK;
        regs->sr |= (new_sr & ~SR_MASK);

	COPY(pc);

#undef COPY

	/* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr
	 * has been restored above.) */
	err |= restore_sigcontext_fpu(regs, sc);

	regs->syscall_nr = -1;		/* disable syscall checks */
	err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]);
	return err;
}

开发者ID:Aircell，项目名称:asp-kernel，代码行数:48，代码来源:signal_64.c

示例5: pathname_name1

void pathname_name1(CL_FORM *base)
{
	COPY(ARG(0), ARG(2));
	LOAD_SYMBOL(SYMBOL(Slisp, 234), ARG(3));	/* PATHNAME */
	rt_struct_typep(ARG(2));
	if(CL_TRUEP(ARG(2)))
	{
		COPY(ARG(0), ARG(2));
	}
	else
	{
		COPY(ARG(0), ARG(2));
		Fstringp(ARG(2));
		if(CL_TRUEP(ARG(2)))
		{
			COPY(ARG(0), ARG(2));
			LOAD_NIL(ARG(3));
			COPY(SYMVAL(Slisp, 233), ARG(4));	/* *DEFAULT-PATHNAME-DEFAULTS* */
			LOAD_FIXNUM(ARG(5), 0, ARG(5));
			LOAD_NIL(ARG(6));
			LOAD_NIL(ARG(7));
			parse_namestring1(ARG(2));
			mv_count = 1;
		}
		else
		{
			COPY(ARG(0), ARG(2));
			LOAD_SYMBOL(SYMBOL(Slisp, 64), ARG(3));	/* STREAM */
			rt_struct_typep(ARG(2));
			if(CL_TRUEP(ARG(2)))
			{
				COPY(ARG(0), ARG(2));
				LOAD_NIL(ARG(3));
				file_name1(ARG(2));
				COPY(SYMVAL(Slisp, 233), ARG(3));	/* *DEFAULT-PATHNAME-DEFAULTS* */
				COPY(ARG(2), ARG(4));
				LOAD_NIL(ARG(5));
				COPY(ARG(3), ARG(6));
				LOAD_FIXNUM(ARG(7), 0, ARG(7));
				LOAD_NIL(ARG(8));
				LOAD_NIL(ARG(9));
				parse_namestring1(ARG(4));
				mv_count = 1;
				COPY(ARG(4), ARG(2));
			}
			else
			{
				LOAD_SMSTR((CL_FORM *)&Kpathname_name1[0], ARG(2));	/* etypecase: the value ~a is not a legal value */
				COPY(ARG(0), ARG(3));
				Ferror(ARG(2), 2);
			}
		}
	}
	COPY(ARG(2), ARG(3));
	LOAD_SYMBOL(SYMBOL(Slisp, 234), ARG(4));	/* PATHNAME */
	rt_struct_typep(ARG(3));
	if(CL_TRUEP(ARG(3)))
	{
		COPY(OFFSET(AR_BASE(GET_FORM(ARG(2))), 3 + 1), ARG(3));
	}
	else
	{
		COPY(SYMVAL(Slisp, 352), ARG(3));	/* NO_STRUCT */
		COPY(ARG(2), ARG(4));
		LOAD_SYMBOL(SYMBOL(Slisp, 234), ARG(5));	/* PATHNAME */
		Ferror(ARG(3), 3);
	}
	if(CL_SYMBOLP(ARG(1)) && GET_SYMBOL(ARG(1)) == SYMBOL(Slisp, 278))	/* COMMON */
	{
		COPY(ARG(2), ARG(4));
		LOAD_SYMBOL(SYMBOL(Slisp, 234), ARG(5));	/* PATHNAME */
		rt_struct_typep(ARG(4));
		if(CL_TRUEP(ARG(4)))
		{
			COPY(OFFSET(AR_BASE(GET_FORM(ARG(2))), 0 + 1), ARG(4));
		}
		else
		{
			COPY(SYMVAL(Slisp, 352), ARG(4));	/* NO_STRUCT */
			COPY(ARG(2), ARG(5));
			LOAD_SYMBOL(SYMBOL(Slisp, 234), ARG(6));	/* PATHNAME */
			Ferror(ARG(4), 3);
		}
		COPY(ARG(4), ARG(5));
		LOAD_SYMBOL(SYMBOL(Slisp, 263), ARG(6));	/* HOST */
		rt_struct_typep(ARG(5));
		if(CL_TRUEP(ARG(5)))
		{
			COPY(OFFSET(AR_BASE(GET_FORM(ARG(4))), 6 + 1), ARG(4));
		}
		else
		{
			COPY(SYMVAL(Slisp, 352), ARG(5));	/* NO_STRUCT */
			COPY(ARG(4), ARG(6));
			LOAD_SYMBOL(SYMBOL(Slisp, 263), ARG(7));	/* HOST */
			Ferror(ARG(5), 3);
		}
		LOAD_BOOL(CL_SYMBOLP(ARG(4)) && GET_SYMBOL(ARG(4)) == SYMBOL(Slisp, 279), ARG(4));	/* LOWER */
	}
	else
//.........这里部分代码省略.........

开发者ID:hoelzl，项目名称:Clicc，代码行数:101，代码来源:lisp128.c

示例6: walk

static void
walk (struct state *st, int dir)
{
    register int    incr = 0;

    if (dir & (LEFT | RIGHT))
    {				/* left/right movement (mabye up/st->down too) */
	st->walk_up = -st->walk_up;		/* bouncing effect (even if hit a wall) */
	if (dir & LEFT)
	{
	    incr = X_INCR;
	    st->walk_frame = (st->walk_up < 0) ? st->left1 : st->left2;
	}
	else
	{
	    incr = -X_INCR;
	    st->walk_frame = (st->walk_up < 0) ? st->right1 : st->right2;
	}
	if ((st->walk_lastdir == FRONT || st->walk_lastdir == DOWN) && dir & UP)
	{

	    /*
	     * workaround silly bug that leaves screen dust when guy is
	     * facing forward or st->down and moves up-left/right.
	     */
	    COPY(st->dpy, st->walk_frame, st->window, st->fg_gc, 0, 0, 64, 64, st->x, st->y);
	}
	/* note that maybe neither UP nor DOWN is set! */
	if (dir & UP && st->y > Y_INCR)
	    st->y -= Y_INCR;
	else if (dir & DOWN && st->y < st->Height - 64)
	    st->y += Y_INCR;
    }
    /* Explicit up/st->down movement only (no left/right) */
    else if (dir == UP)
	COPY(st->dpy, st->front, st->window, st->fg_gc, 0, 0, 64, 64, st->x, st->y -= Y_INCR);
    else if (dir == DOWN)
	COPY(st->dpy, st->down, st->window, st->fg_gc, 0, 0, 64, 64, st->x, st->y += Y_INCR);
    else if (dir == FRONT && st->walk_frame != st->front)
    {
	if (st->walk_up > 0)
	    st->walk_up = -st->walk_up;
	if (st->walk_lastdir & LEFT)
	    st->walk_frame = st->left_front;
	else if (st->walk_lastdir & RIGHT)
	    st->walk_frame = st->right_front;
	else
	    st->walk_frame = st->front;
	COPY(st->dpy, st->walk_frame, st->window, st->fg_gc, 0, 0, 64, 64, st->x, st->y);
    }
    if (dir & LEFT)
	while (--incr >= 0)
	{
	    COPY(st->dpy, st->walk_frame, st->window, st->fg_gc, 0, 0, 64, 64, --st->x, st->y + st->walk_up);
	}
    else if (dir & RIGHT)
	while (++incr <= 0)
	{
	    COPY(st->dpy, st->walk_frame, st->window, st->fg_gc, 0, 0, 64, 64, ++st->x, st->y + st->walk_up);
	}
    st->walk_lastdir = dir;
}

开发者ID:Davidchristy，项目名称:Game-of-Life-Screen-Saver，代码行数:62，代码来源:noseguy.c

示例7: FcharGE

void FcharGE(CL_FORM *base, int nargs)
{
	CL_FORM *rest_0;
	CL_FORM *local;
	rest_0 = ARG(1);
	local = ARG(nargs);
	{
		CL_FORM *rest_1;
		LOAD_NIL(LOCAL(0));
		rest_1 = rest_0;
		M1_1:;
		if(NOT(REST_NOT_EMPTY(rest_1)))
		{
			LOAD_NIL(LOCAL(0));
			LOAD_SYMBOL(SYMBOL(Slisp, 48), ARG(0));	/* T */
			goto RETURN1;
		}
		{
			CL_FORM *rest_2;
			rest_2 = rest_1;
			REST_CAR(rest_2, LOCAL(0));
		}
		if(CL_CHARP(ARG(0)))
		{
			COPY(ARG(0), LOCAL(1));
		}
		else
		{
			COPY(SYMVAL(Slisp, 58), LOCAL(1));	/* WRONG_TYPE */
			COPY(ARG(0), LOCAL(2));
			LOAD_SYMBOL(SYMBOL(Slisp, 18), LOCAL(3));	/* CHARACTER */
			Ferror(LOCAL(1), 3);
		}
		rt_char_code(LOCAL(1));
		if(CL_CHARP(LOCAL(0)))
		{
			COPY(LOCAL(0), LOCAL(2));
		}
		else
		{
			COPY(SYMVAL(Slisp, 58), LOCAL(2));	/* WRONG_TYPE */
			COPY(LOCAL(0), LOCAL(3));
			LOAD_SYMBOL(SYMBOL(Slisp, 18), LOCAL(4));	/* CHARACTER */
			Ferror(LOCAL(2), 3);
		}
		rt_char_code(LOCAL(2));
		Flt(LOCAL(1), 2);
		if(CL_TRUEP(LOCAL(1)))
		{
			LOAD_NIL(ARG(0));
			goto RETURN1;
		}
		COPY(LOCAL(0), ARG(0));
		{
			CL_FORM *rest_3;
			rest_3 = rest_1;
			rest_1 = REST_CDR(rest_3);
		}
		goto M1_1;
	}
	RETURN1:;
}

开发者ID:plops，项目名称:clicc，代码行数:62，代码来源:FcharGE.c

示例8: restore_sigcontext

static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
		   int *r0_p)
{
	unsigned int err = 0;

	/* Always make any pending restarted system calls return -EINTR */
	current_thread_info()->restart_block.fn = do_no_restart_syscall;

#define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
	COPY(r4);
	COPY(r5);
	COPY(r6);
	COPY(pt_regs);
	/* COPY(r0); Skip r0 */
	COPY(r1);
	COPY(r2);
	COPY(r3);
	COPY(r7);
	COPY(r8);
	COPY(r9);
	COPY(r10);
	COPY(r11);
	COPY(r12);
#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
	COPY(acc0h);
	COPY(acc0l);
	COPY(acc1h);
	COPY(acc1l);
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
	COPY(acch);
	COPY(accl);
#else
#error unknown isa configuration
#endif
	COPY(psw);
	COPY(bpc);
	COPY(bbpsw);
	COPY(bbpc);
	COPY(spu);
	COPY(fp);
	COPY(lr);
	COPY(spi);
#undef COPY

	regs->syscall_nr = -1;	/* disable syscall checks */
	err |= __get_user(*r0_p, &sc->sc_r0);

	return err;
}

开发者ID:GodFox，项目名称:magx_kernel_xpixl，代码行数:50，代码来源:signal.c

示例9: vector_push_extend1

void vector_push_extend1(CL_FORM *base)
{
	COPY(ARG(1), ARG(3));
	Farray_has_fill_pointer_p(ARG(3));
	if(CL_TRUEP(ARG(3)))
	{
	}
	else
	{
		COPY(SYMVAL(Slisp, 154), ARG(3));	/* NO_FILL_PTR */
		COPY(ARG(1), ARG(4));
		Ferror(ARG(3), 2);
	}
	COPY(ARG(1), ARG(3));
	LOAD_SYMBOL(SYMBOL(Slisp, 150), ARG(4));	/* COMPLEX-VECTOR */
	rt_struct_typep(ARG(3));
	if(CL_TRUEP(ARG(3)))
	{
		COPY(OFFSET(AR_BASE(GET_FORM(ARG(1))), 3 + 1), ARG(3));
	}
	else
	{
		COPY(SYMVAL(Slisp, 352), ARG(3));	/* NO_STRUCT */
		COPY(ARG(1), ARG(4));
		LOAD_SYMBOL(SYMBOL(Slisp, 150), ARG(5));	/* COMPLEX-VECTOR */
		Ferror(ARG(3), 3);
	}
	COPY(ARG(3), ARG(4));
	COPY(ARG(1), ARG(5));
	Farray_total_size(ARG(5));
	Fge(ARG(4), 2);
	if(CL_TRUEP(ARG(4)))
	{
		COPY(ARG(1), ARG(4));
		if(CL_TRUEP(ARG(2)))
		{
			COPY(ARG(1), ARG(5));
			Farray_total_size(ARG(5));
			COPY(ARG(2), ARG(6));
			Fplus(ARG(5), 2);
		}
		else
		{
			LOAD_FIXNUM(ARG(5), 2, ARG(5));
			COPY(ARG(1), ARG(6));
			Farray_total_size(ARG(6));
			Fmult(ARG(5), 2);
		}
		LOAD_NIL(ARG(6));
		LOAD_NIL(ARG(7));
		LOAD_NIL(ARG(8));
		COPY(ARG(3), ARG(9));
		LOAD_NIL(ARG(10));
		LOAD_NIL(ARG(11));
		LOAD_SYMBOL(SYMBOL(Slisp, 101), ARG(12));	/* FILL-POINTER */
		COPY(ARG(3), ARG(13));
		Flist(ARG(12), 2);
		LOAD_NIL(ARG(13));
		LOAD_SYMBOL(SYMBOL(Slisp, 48), ARG(14));	/* T */
		adjust_array1(ARG(4));
	}
	COPY(ARG(0), ARG(4));
	COPY(ARG(1), ARG(5));
	COPY(ARG(3), ARG(6));
	rt_set_vref(ARG(4));
	COPY(ARG(3), ARG(4));
	F1plus(ARG(4));
	COPY(ARG(1), ARG(5));
	Fset_fill_pointer(ARG(4));
	COPY(ARG(3), ARG(0));
}

开发者ID:hoelzl，项目名称:Clicc，代码行数:71，代码来源:lisp143.c

示例10: shadowing_import1

void shadowing_import1(CL_FORM *base)
{
	coerce_to_package(ARG(1));
	if(CL_LISTP(ARG(0)))
	{
	}
	else
	{
		COPY(ARG(0), ARG(2));
		Flist(ARG(2), 1);
		COPY(ARG(2), ARG(0));
	}
	LOAD_NIL(ARG(2));
	COPY(ARG(0), ARG(3));
	M1_1:;
	if(CL_ATOMP(ARG(3)))
	{
		LOAD_NIL(ARG(2));
		goto RETURN1;
	}
	COPY(ARG(3), ARG(4));
	COPY(GET_CAR(ARG(4)), ARG(2));
	if(CL_SYMBOLP(ARG(2)))
	{
		LOAD_SMSTR(SYM_NAME(ARG(2)), ARG(4));
	}
	else
	{
		if(CL_TRUEP(ARG(2)))
		{
			COPY(SYMVAL(Slisp, 676), ARG(4));	/* SYM_EXPECTED */
			COPY(ARG(2), ARG(5));
			Ferror(ARG(4), 2);
		}
		else
		{
			LOAD_SMSTR((CL_FORM *)&KClisp[266], ARG(4));	/* NIL */
		}
	}
	COPY(ARG(1), ARG(5));
	find_symbol1(ARG(4));
	COPY(&mv_buf[0], ARG(5));
	{
		int nargs;
		nargs = 2;
		mv_count = 1;
		{
			switch(nargs)
			{
				case 0:
				LOAD_NIL(ARG(4));
				case 1:
				LOAD_NIL(ARG(5));
				nargs = 2;
			}
			if(CL_SYMBOLP(ARG(2)))
			{
				LOAD_SMSTR(SYM_NAME(ARG(2)), ARG(6));
			}
			else
			{
				if(CL_TRUEP(ARG(2)))
				{
					COPY(SYMVAL(Slisp, 676), ARG(6));	/* SYM_EXPECTED */
					COPY(ARG(2), ARG(7));
					Ferror(ARG(6), 2);
				}
				else
				{
					LOAD_SMSTR((CL_FORM *)&KClisp[266], ARG(6));	/* NIL */
				}
			}
			LOAD_FIXNUM(ARG(7), 101, ARG(7));
			COPY(ARG(6), ARG(8));
			string_to_simple_string(ARG(8));
			rt_sxhash_string(ARG(8));
			COPY(ARG(8), ARG(9));
			LOAD_FIXNUM(ARG(10), 101, ARG(10));
			rt_floor(ARG(9));
			COPY(&mv_buf[0], ARG(10));
			mv_count = 1;
			{
				COPY(ARG(10), ARG(6));
			}
			if(CL_SYMBOLP(ARG(5)) && GET_SYMBOL(ARG(5)) == SYMBOL(Slisp, 384))	/* INTERNAL */
			{
				COPY(ARG(4), ARG(7));
				COPY(ARG(1), ARG(8));
				LOAD_SYMBOL(SYMBOL(Slisp, 354), ARG(9));	/* PACKAGE */
				rt_struct_typep(ARG(8));
				if(CL_TRUEP(ARG(8)))
				{
					COPY(OFFSET(AR_BASE(GET_FORM(ARG(1))), 2 + 1), ARG(8));
				}
				else
				{
					COPY(SYMVAL(Slisp, 352), ARG(8));	/* NO_STRUCT */
					COPY(ARG(1), ARG(9));
					LOAD_SYMBOL(SYMBOL(Slisp, 354), ARG(10));	/* PACKAGE */
					Ferror(ARG(8), 3);
//.........这里部分代码省略.........

开发者ID:hoelzl，项目名称:Clicc，代码行数:101，代码来源:lisp105.c

示例11: restore_sigcontext

/*
 * do a signal return; undo the signal stack.
 */
static int restore_sigcontext(struct pt_regs *regs,
			      struct sigcontext __user *sc, long *_d0)
{
	unsigned int err = 0;

	/* Always make any pending restarted system calls return -EINTR */
	current_thread_info()->restart_block.fn = do_no_restart_syscall;

	if (is_using_fpu(current))
		fpu_kill_state(current);

#define COPY(x) err |= __get_user(regs->x, &sc->x)
	COPY(d1); COPY(d2); COPY(d3);
	COPY(a0); COPY(a1); COPY(a2); COPY(a3);
	COPY(e0); COPY(e1); COPY(e2); COPY(e3);
	COPY(e4); COPY(e5); COPY(e6); COPY(e7);
	COPY(lar); COPY(lir);
	COPY(mdr); COPY(mdrq);
	COPY(mcvf); COPY(mcrl); COPY(mcrh);
	COPY(sp); COPY(pc);
#undef COPY

	{
		unsigned int tmpflags;
#ifndef CONFIG_MN10300_USING_JTAG
#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
		   EPSW_T | EPSW_nAR)
#else
#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
		   EPSW_nAR)
#endif
		err |= __get_user(tmpflags, &sc->epsw);
		regs->epsw = (regs->epsw & ~USER_EPSW) |
		  (tmpflags & USER_EPSW);
		regs->orig_d0 = -1;		/* disable syscall checks */
	}

	{
		struct fpucontext *buf;
		err |= __get_user(buf, &sc->fpucontext);
		if (buf) {
			if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
				goto badframe;
			err |= fpu_restore_sigcontext(buf);
		}
	}

	err |= __get_user(*_d0, &sc->d0);
	return err;

badframe:
	return 1;
}

开发者ID:moddingg33k，项目名称:deprecated_android_kernel_synopsis，代码行数:56，代码来源:signal.c

示例12: setup_sigcontext

/*
 * store the userspace context into a signal frame
 */
static int setup_sigcontext(struct sigcontext __user *sc,
			    struct fpucontext *fpuctx,
			    struct pt_regs *regs,
			    unsigned long mask)
{
	int tmp, err = 0;

#define COPY(x) err |= __put_user(regs->x, &sc->x)
	COPY(d0); COPY(d1); COPY(d2); COPY(d3);
	COPY(a0); COPY(a1); COPY(a2); COPY(a3);
	COPY(e0); COPY(e1); COPY(e2); COPY(e3);
	COPY(e4); COPY(e5); COPY(e6); COPY(e7);
	COPY(lar); COPY(lir);
	COPY(mdr); COPY(mdrq);
	COPY(mcvf); COPY(mcrl); COPY(mcrh);
	COPY(sp); COPY(epsw); COPY(pc);
#undef COPY

	tmp = fpu_setup_sigcontext(fpuctx);
	if (tmp < 0)
		err = 1;
	else
		err |= __put_user(tmp ? fpuctx : NULL, &sc->fpucontext);

	/* non-iBCS2 extensions.. */
	err |= __put_user(mask, &sc->oldmask);

	return err;
}

开发者ID:moddingg33k，项目名称:deprecated_android_kernel_synopsis，代码行数:32，代码来源:signal.c

示例13: restore_sigcontext

static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *prax)
{
	unsigned int err = 0;

	/* Always make any pending restarted system calls return -EINTR */
	current_thread_info()->restart_block.fn = do_no_restart_syscall;

#define COPY(x)		err |= __get_user(regs->x, &sc->x)

	COPY(rdi); COPY(rsi); COPY(rbp); COPY(rsp); COPY(rbx);
	COPY(rdx); COPY(rcx); COPY(rip);
	COPY(r8);
	COPY(r9);
	COPY(r10);
	COPY(r11);
	COPY(r12);
	COPY(r13);
	COPY(r14);
	COPY(r15);

	/* Kernel saves and restores only the CS segment register on signals,
	 * which is the bare minimum needed to allow mixed 32/64-bit code.
	 * App's signal handler can save/restore other segments if needed. */
	{
		unsigned cs;
		err |= __get_user(cs, &sc->cs);
		regs->cs = cs | 3;	/* Force into user mode */
	}

	{
		unsigned int tmpflags;
		err |= __get_user(tmpflags, &sc->eflags);
		regs->eflags = (regs->eflags & ~0x40DD5) | (tmpflags & 0x40DD5);
		regs->orig_rax = -1;		/* disable syscall checks */
	}

	{
		struct _fpstate __user * buf;
		err |= __get_user(buf, &sc->fpstate);

		if (buf) {
			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
				goto badframe;
			err |= restore_i387(buf);
		} else {
			struct task_struct *me = current;
			if (used_math()) {
				clear_fpu(me);
				clear_used_math();
			}
		}
	}

	err |= __get_user(*prax, &sc->rax);
	return err;

badframe:
	return 1;
}

开发者ID:gnensis，项目名称:linux-2.6.15，代码行数:60，代码来源:signal.c

示例14: decode

int decode(void)
{
    VAAPIContext * const vaapi = vaapi_get_context();
    VAPictureParameterBufferMPEG4 *pic_param;
    VASliceParameterBufferMPEG4 *slice_param;
    VAIQMatrixBufferMPEG4 *iq_matrix;
    int i, slice_count;

    MPEG4PictureInfo mpeg4_pic_info;
    MPEG4SliceInfo mpeg4_slice_info;
    MPEG4IQMatrix mpeg4_iq_matrix;
    const uint8_t *mpeg4_slice_data;
    unsigned int mpeg4_slice_data_size;

    if (!vaapi)
        return -1;

    mpeg4_get_picture_info(&mpeg4_pic_info);

    if (vaapi_init_decoder(VAProfileMPEG4AdvancedSimple, VAEntrypointVLD,
                           mpeg4_pic_info.width, mpeg4_pic_info.height) < 0)
        return -1;

    if ((pic_param = vaapi_alloc_picture(sizeof(*pic_param))) == NULL)
        return -1;

#define COPY(field) \
    pic_param->field = mpeg4_pic_info.field
#define COPY_BFM(a,b,c) \
    pic_param->BFM(a,b,c) = mpeg4_pic_info.a.b.c
    pic_param->vop_width = mpeg4_pic_info.width;
    pic_param->vop_height = mpeg4_pic_info.height;
    pic_param->forward_reference_picture = 0xffffffff;
    pic_param->backward_reference_picture = 0xffffffff;
    pic_param->BFV(vol_fields, value) = 0; /* reset all bits */
    COPY_BFM(vol_fields, bits, short_video_header);
    COPY_BFM(vol_fields, bits, chroma_format);
    COPY_BFM(vol_fields, bits, interlaced);
    COPY_BFM(vol_fields, bits, obmc_disable);
    COPY_BFM(vol_fields, bits, sprite_enable);
    COPY_BFM(vol_fields, bits, sprite_warping_accuracy);
    COPY_BFM(vol_fields, bits, quant_type);
    COPY_BFM(vol_fields, bits, quarter_sample);
    COPY_BFM(vol_fields, bits, data_partitioned);
    COPY_BFM(vol_fields, bits, reversible_vlc);
    COPY(no_of_sprite_warping_points);
    for (i = 0; i < 3; i++) {
        COPY(sprite_trajectory_du[i]);
        COPY(sprite_trajectory_dv[i]);
    }
    COPY(quant_precision);
    pic_param->BFV(vop_fields, value) = 0; /* reset all bits */
    COPY_BFM(vop_fields, bits, vop_coding_type);
    COPY_BFM(vop_fields, bits, backward_reference_vop_coding_type);
    COPY_BFM(vop_fields, bits, vop_rounding_type);
    COPY_BFM(vop_fields, bits, intra_dc_vlc_thr);
    COPY_BFM(vop_fields, bits, top_field_first);
    COPY_BFM(vop_fields, bits, alternate_vertical_scan_flag);
    COPY(vop_fcode_forward);
    COPY(vop_fcode_backward);
    COPY(num_gobs_in_vop);
    COPY(num_macroblocks_in_gob);
    COPY(TRB);
    COPY(TRD);
#if (VA_CHECK_VERSION(0,31,1) /* XXX: update when changes are merged */ || \
     (VA_CHECK_VERSION(0,31,0) && VA_SDS_VERSION >= 4))
    COPY(vop_time_increment_resolution);
    COPY_BFM(vol_fields, bits, resync_marker_disable);
#endif
#undef COPY_BFM
#undef COPY

    if (mpeg4_iq_matrix.load_intra_quant_mat ||
        mpeg4_iq_matrix.load_non_intra_quant_mat) {
        if ((iq_matrix = vaapi_alloc_iq_matrix(sizeof(*iq_matrix))) == NULL)
            return -1;
        mpeg4_get_iq_matrix(&mpeg4_iq_matrix);

#define COPY(field) iq_matrix->field = mpeg4_iq_matrix.field
        COPY(load_intra_quant_mat);
        COPY(load_non_intra_quant_mat);
        for (i = 0; i < 64; i++) {
            COPY(intra_quant_mat[i]);
            COPY(non_intra_quant_mat[i]);
        }
#undef COPY
    }

    slice_count = mpeg4_get_slice_count();
    for (i = 0; i < slice_count; i++) {
        if (mpeg4_get_slice_info(i, &mpeg4_slice_info) < 0)
            return -1;
        if (mpeg4_get_slice_data(i, &mpeg4_slice_data, &mpeg4_slice_data_size) < 0)
            return -1;
        if (mpeg4_slice_data_size != mpeg4_slice_info.slice_data_size)
            return -1;
        if ((slice_param = vaapi_alloc_slice(sizeof(*slice_param),
                                             mpeg4_slice_data,
                                             mpeg4_slice_data_size)) == NULL)
            return -1;
//.........这里部分代码省略.........

开发者ID:O-Computers，项目名称:hwdecode-demos，代码行数:101，代码来源:vaapi_mpeg4.c

示例15: setup_sigcontext

static int
setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
	         unsigned long mask)
{
	int err = 0;

#define COPY(x)	err |= __put_user(regs->x, &sc->sc_##x)
	COPY(r4);
	COPY(r5);
	COPY(r6);
	COPY(pt_regs);
	COPY(r0);
	COPY(r1);
	COPY(r2);
	COPY(r3);
	COPY(r7);
	COPY(r8);
	COPY(r9);
	COPY(r10);
	COPY(r11);
	COPY(r12);
#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
	COPY(acc0h);
	COPY(acc0l);
	COPY(acc1h);
	COPY(acc1l);
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
	COPY(acch);
	COPY(accl);
#else
#error unknown isa configuration
#endif
	COPY(psw);
	COPY(bpc);
	COPY(bbpsw);
	COPY(bbpc);
	COPY(spu);
	COPY(fp);
	COPY(lr);
	COPY(spi);
#undef COPY

	err |= __put_user(mask, &sc->oldmask);

	return err;
}

开发者ID:GodFox，项目名称:magx_kernel_xpixl，代码行数:46，代码来源:signal.c

示例16: Z133_lambda

static void Z133_lambda(CL_FORM *base)
{
	COPY(INDIRECT(GET_FORM(ARG(0)) + 4), ARG(2));
	COPY(ARG(1), ARG(3));
	find_symbol1(ARG(2));
	COPY(&mv_buf[0], ARG(3));
	{
		int nargs;
		nargs = 2;
		mv_count = 1;
		{
			switch(nargs)
			{
				case 0:
				LOAD_NIL(ARG(2));
				case 1:
				LOAD_NIL(ARG(3));
				nargs = 2;
			}
			LOAD_CONS((CL_FORM *)&KClisp[88], ARG(4));
			COPY(ARG(3), ARG(5));
			COPY(ARG(4), ARG(6));
			LOAD_NIL(ARG(7));
			LOAD_NIL(ARG(8));
			LOAD_NIL(ARG(9));
			member1(ARG(5));
			if(CL_TRUEP(ARG(5)))
			{
				COPY(ARG(2), ARG(4));
				COPY(INDIRECT(GET_FORM(ARG(0)) + 3), ARG(5));
				COPY(ARG(4), ARG(6));
				COPY(ARG(5), ARG(7));
				LOAD_NIL(ARG(8));
				LOAD_NIL(ARG(9));
				LOAD_NIL(ARG(10));
				adjoin1(ARG(6));
				COPY(ARG(6), INDIRECT(GET_FORM(ARG(0)) + 3));
				COPY(INDIRECT(GET_FORM(ARG(0)) + 3), ARG(0));
			}
			else
			{
				LOAD_NIL(ARG(0));
			}
		}
	}
}

开发者ID:hoelzl，项目名称:Clicc，代码行数:46，代码来源:lisp463.c

示例17: describe_monster_race

/*
 * Hack -- display monster information using "roff()"
 *
 * Note that there is now a compiler option to only read the monster
 * descriptions from the raw file when they are actually needed, which
 * saves about 60K of memory at the cost of disk access during monster
 * recall, which is optional to the user.
 *
 * This function should only be called with the cursor placed at the
 * left edge of the screen, on a cleared line, in which the recall is
 * to take place.  One extra blank line is left after the recall.
 */
void describe_monster_race(const monster_race *r_ptr, const monster_lore *l_ptr, bool spoilers)
{
	monster_lore lore;

	/* Hack -- create a copy of the monster-memory */
	COPY(&lore, l_ptr, monster_lore);

	/* Assume some "obvious" flags */
	lore.flags1 |= (r_ptr->flags1 & RF1_OBVIOUS_MASK);

	/* Killing a monster reveals some properties */
	if (lore.tkills)
	{
		/* Know "race" flags */
		lore.flags3 |= (r_ptr->flags3 & RF3_RACE_MASK);

		/* Know "forced" flags */
		lore.flags1 |= (r_ptr->flags1 & (RF1_FORCE_DEPTH | RF1_FORCE_MAXHP));
	}

	/* Cheat -- know everything */
	if (cheat_know || spoilers) cheat_monster_lore(r_ptr, &lore);

	/* Show kills of monster vs. player(s) */
	if (!spoilers)
		describe_monster_kills(r_ptr, &lore);

	/* Monster description */
	describe_monster_desc(r_ptr);

	/* Describe the movement and level of the monster */
	describe_monster_movement(r_ptr, &lore);

	/* Describe experience */
	describe_monster_exp(r_ptr, &lore);

	/* Describe power */
	describe_monster_power(r_ptr, &lore);

	/* Describe the known ranged attacks */
	describe_monster_attack(r_ptr, &lore, TRUE);

	/* Describe spells and innate attacks */
	describe_monster_spells(r_ptr, &lore);

	/* Describe monster "toughness" */
	if (!spoilers) describe_monster_toughness(r_ptr, &lore);

	/* Describe the abilities of the monster */
	describe_monster_abilities(r_ptr, &lore);

	/* Describe the monster drop */
	describe_monster_drop(r_ptr, &lore);

	/* Describe the known attacks */
	describe_monster_attack(r_ptr, &lore, FALSE);

	/* Notice "Quest" monsters */
	if (lore.flags1 & (RF1_QUESTOR))
	{
		text_out("You feel an intense desire to kill this monster...  ");
	}

	/* Notice "Guardian" monsters */
	if (lore.flags1 & (RF1_GUARDIAN))
	{
		text_out("It is a dungeon guardian, impeding your progress further.  ");
	}

	/* All done */
	text_out("\n");
}

开发者ID:BackupTheBerlios，项目名称:unangband-svn，代码行数:84，代码来源:monster1.c

示例18: restore_sigcontext

static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
{
	unsigned int err = 0;

#define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
			COPY(regs[1]);
	COPY(regs[2]);	COPY(regs[3]);
	COPY(regs[4]);	COPY(regs[5]);
	COPY(regs[6]);	COPY(regs[7]);
	COPY(regs[8]);	COPY(regs[9]);
	COPY(regs[10]);	COPY(regs[11]);
	COPY(regs[12]);	COPY(regs[13]);
	COPY(regs[14]);	COPY(regs[15]);
	COPY(gbr);	COPY(mach);
	COPY(macl);	COPY(pr);
	COPY(sr);	COPY(pc);
#undef COPY

#ifdef CONFIG_SH_FPU
	if (current_cpu_data.flags & CPU_HAS_FPU) {
		int owned_fp;
		struct task_struct *tsk = current;

		regs->sr |= SR_FD; /* Release FPU */
		clear_fpu(tsk, regs);
		clear_used_math();
		__get_user (owned_fp, &sc->sc_ownedfp);
		if (owned_fp)
			err |= restore_sigcontext_fpu(sc);
	}
#endif

	regs->tra = -1;		/* disable syscall checks */
	err |= __get_user(*r0_p, &sc->sc_regs[0]);
	return err;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:37，代码来源:signal.c

示例19: Z147_get_elem

static void Z147_get_elem(CL_FORM *base)
{
	if(CL_CONSP(ARG(1)))
	{
		COPY(GET_CAR(ARG(1)), ARG(2));
	}
	else
	{
		if(CL_TRUEP(ARG(1)))
		{
			LOAD_SMSTR((CL_FORM *)&KClisp[264], ARG(2));	/* ~a is not a list */
			COPY(ARG(1), ARG(3));
			Ferror(ARG(2), 2);
		}
		else
		{
			COPY(ARG(1), ARG(2));
		}
	}
	if(CL_LISTP(ARG(2)))
	{
		if(CL_CONSP(ARG(1)))
		{
			COPY(GET_CAR(ARG(1)), ARG(2));
		}
		else
		{
			if(CL_TRUEP(ARG(1)))
			{
				LOAD_SMSTR((CL_FORM *)&KClisp[264], ARG(2));	/* ~a is not a list */
				COPY(ARG(1), ARG(3));
				Ferror(ARG(2), 2);
			}
			else
			{
				COPY(ARG(1), ARG(2));
			}
		}
		if(CL_CONSP(ARG(2)))
		{
			COPY(GET_CAR(ARG(2)), ARG(3));
		}
		else
		{
			if(CL_TRUEP(ARG(2)))
			{
				LOAD_SMSTR((CL_FORM *)&KClisp[264], ARG(3));	/* ~a is not a list */
				COPY(ARG(2), ARG(4));
				Ferror(ARG(3), 2);
			}
			else
			{
				COPY(ARG(2), ARG(3));
			}
		}
		COPY(ARG(2), ARG(4));
		COPY(ARG(4), ARG(5));
		if(CL_CONSP(ARG(5)))
		{
			COPY(GET_CDR(ARG(5)), ARG(2));
		}
		else
		{
			if(CL_TRUEP(ARG(5)))
			{
				LOAD_SMSTR((CL_FORM *)&KClisp[262], ARG(6));	/* ~a is not a list */
				COPY(ARG(5), ARG(7));
				Ferror(ARG(6), 2);
			}
			else
			{
				COPY(ARG(5), ARG(2));
			}
		}
		if(CL_CONSP(ARG(1)))
		{
			COPY(ARG(2), GET_CAR(ARG(1)));
		}
		else
		{
			LOAD_SMSTR((CL_FORM *)&KClisp[252], ARG(4));	/* ~a is not a cons */
			COPY(ARG(1), ARG(5));
			Ferror(ARG(4), 2);
		}
		COPY(ARG(3), ARG(0));
	}
	else
	{
		if(CL_CONSP(ARG(1)))
		{
			COPY(GET_CAR(ARG(1)), ARG(2));
		}
		else
		{
			if(CL_TRUEP(ARG(1)))
			{
				LOAD_SMSTR((CL_FORM *)&KClisp[264], ARG(2));	/* ~a is not a list */
				COPY(ARG(1), ARG(3));
				Ferror(ARG(2), 2);
			}
//.........这里部分代码省略.........

开发者ID:hoelzl，项目名称:Clicc，代码行数:101，代码来源:Fsome.c

示例20: setup_sigcontext

static int
setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
		 unsigned long mask)
{
	int err = 0;

#define COPY(x)		err |= __put_user(regs->x, &sc->sc_##x)
	COPY(regs[0]);	COPY(regs[1]);
	COPY(regs[2]);	COPY(regs[3]);
	COPY(regs[4]);	COPY(regs[5]);
	COPY(regs[6]);	COPY(regs[7]);
	COPY(regs[8]);	COPY(regs[9]);
	COPY(regs[10]);	COPY(regs[11]);
	COPY(regs[12]);	COPY(regs[13]);
	COPY(regs[14]);	COPY(regs[15]);
	COPY(gbr);	COPY(mach);
	COPY(macl);	COPY(pr);
	COPY(sr);	COPY(pc);
#undef COPY

#ifdef CONFIG_SH_FPU
	err |= save_sigcontext_fpu(sc, regs);
#endif

	/* non-iBCS2 extensions.. */
	err |= __put_user(mask, &sc->oldmask);

	return err;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:29，代码来源:signal.c

注：本文中的COPY函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ COPY_4V函数代码示例发布时间：2022-05-30

C++ CON_TABLE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9980|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9648|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ COPY函数代码示例

示例1: MESH_Create

示例2: setup_rt_frame

示例3: setup_sigcontext

示例4: restore_sigcontext

示例5: pathname_name1

示例6: walk

示例7: FcharGE

示例8: restore_sigcontext

示例9: vector_push_extend1

示例10: shadowing_import1

示例11: restore_sigcontext

示例12: setup_sigcontext

示例13: restore_sigcontext

示例14: decode

示例15: setup_sigcontext

示例16: Z133_lambda

示例17: describe_monster_race

示例18: restore_sigcontext

示例19: Z147_get_elem

示例20: setup_sigcontext

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

切微信小程序前端制作-设备管理主界面

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

zendesk/android-floating-action-button:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053